Commit Graph

358 Commits

Author SHA1 Message Date
Linus Torvalds d0daaeaf60 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull genirq updates from Thomas Gleixner:
 "The irq departement provides:

   - A synchronization fix for free_irq() to synchronize just the
     removed interrupt thread on shared interrupt lines.

   - Consolidate the multi low level interrupt entry handling and mvoe
     it to the generic code instead of adding yet another copy for
     RISC-V

   - Refactoring of the ARM LPI allocator and LPI exposure to the
     hypervisor

   - Yet another interrupt chip driver for the JZ4725B SoC

   - Speed up for /proc/interrupts as people seem to love reading this
     file with high frequency

   - Miscellaneous fixes and updates"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  irqchip/gic-v3-its: Make its_lock a raw_spin_lock_t
  genirq/irqchip: Remove MULTI_IRQ_HANDLER as it's now obselete
  openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER
  arm64: Use the new GENERIC_IRQ_MULTI_HANDLER
  ARM: Convert to GENERIC_IRQ_MULTI_HANDLER
  irqchip: Port the ARM IRQ drivers to GENERIC_IRQ_MULTI_HANDLER
  irqchip/gic-v3-its: Reduce minimum LPI allocation to 1 for PCI devices
  dt-bindings: irqchip: renesas-irqc: Document r8a77980 support
  dt-bindings: irqchip: renesas-irqc: Document r8a77470 support
  irqchip/ingenic: Add support for the JZ4725B SoC
  irqchip/stm32: Add exti0 translation for stm32mp1
  genirq: Remove redundant NULL pointer check in __free_irq()
  irqchip/gic-v3-its: Honor hypervisor enforced LPI range
  irqchip/gic-v3: Expose GICD_TYPER in the rdist structure
  irqchip/gic-v3-its: Drop chunk allocation compatibility
  irqchip/gic-v3-its: Move minimum LPI requirements to individual busses
  irqchip/gic-v3-its: Use full range of LPIs
  irqchip/gic-v3-its: Refactor LPI allocator
  genirq: Synchronize only with single thread on free_irq()
  genirq: Update code comments wrt recycled thread_mask
  ...
2018-08-13 10:47:26 -07:00
Thomas Gleixner d1f0301b33 genirq: Make force irq threading setup more robust
The support of force threading interrupts which are set up with both a
primary and a threaded handler wreckaged the setup of regular requested
threaded interrupts (primary handler == NULL).

The reason is that it does not check whether the primary handler is set to
the default handler which wakes the handler thread. Instead it replaces the
thread handler with the primary handler as it would do with force threaded
interrupts which have been requested via request_irq(). So both the primary
and the thread handler become the same which then triggers the warnon that
the thread handler tries to wakeup a not configured secondary thread.

Fortunately this only happens when the driver omits the IRQF_ONESHOT flag
when requesting the threaded interrupt, which is normaly caught by the
sanity checks when force irq threading is disabled.

Fix it by skipping the force threading setup when a regular threaded
interrupt is requested. As a consequence the interrupt request which lacks
the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging
it.

Fixes: 2a1d3ab898 ("genirq: Handle force threading of irqs with primary and thread handler")
Reported-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>
Cc: stable@vger.kernel.org
2018-08-03 15:19:01 +02:00
RAGHU Halharvi d91cfeb0aa genirq: Remove redundant NULL pointer check in __free_irq()
The NULL pointer check in __free_irq() triggers a 'dereference before NULL
pointer check' warning in static code analysis. It turns out that the check
is redundant because all callers have a NULL pointer check already.

Remove it.

Signed-off-by: RAGHU Halharvi <raghuhack78@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180717102009.7708-1-raghuhack78@gmail.com
2018-07-17 13:35:44 +02:00
Lukas Wunner 519cc8652b genirq: Synchronize only with single thread on free_irq()
When pciehp is converted to threaded IRQ handling, removal of unplugged
devices below a PCIe hotplug port happens synchronously in the IRQ thread.
Removal of devices typically entails a call to free_irq() by their drivers.

If those devices share their IRQ with the hotplug port, __free_irq()
deadlocks because it calls synchronize_irq() to wait for all hard IRQ
handlers as well as all threads sharing the IRQ to finish.

Actually it's sufficient to wait only for the IRQ thread of the removed
device, so call synchronize_hardirq() to wait for all hard IRQ handlers to
finish, but no longer for any threads.  Compensate by rearranging the
control flow in irq_wait_for_interrupt() such that the device's thread is
allowed to run one last time after kthread_stop() has been called.

kthread_stop() blocks until the IRQ thread has completed.  On completion
the IRQ thread clears its oneshot thread_mask bit.  This is safe because
__free_irq() holds the request_mutex, thereby preventing __setup_irq() from
handing out the same oneshot thread_mask bit to a newly requested action.

Stack trace for posterity:
    INFO: task irq/17-pciehp:94 blocked for more than 120 seconds.
    schedule+0x28/0x80
    synchronize_irq+0x6e/0xa0
    __free_irq+0x15a/0x2b0
    free_irq+0x33/0x70
    pciehp_release_ctrl+0x98/0xb0
    pcie_port_remove_service+0x2f/0x40
    device_release_driver_internal+0x157/0x220
    bus_remove_device+0xe2/0x150
    device_del+0x124/0x340
    device_unregister+0x16/0x60
    remove_iter+0x1a/0x20
    device_for_each_child+0x4b/0x90
    pcie_port_device_remove+0x1e/0x30
    pci_device_remove+0x36/0xb0
    device_release_driver_internal+0x157/0x220
    pci_stop_bus_device+0x7d/0xa0
    pci_stop_bus_device+0x3d/0xa0
    pci_stop_and_remove_bus_device+0xe/0x20
    pciehp_unconfigure_device+0xb8/0x160
    pciehp_disable_slot+0x84/0x130
    pciehp_ist+0x158/0x190
    irq_thread_fn+0x1b/0x50
    irq_thread+0x143/0x1a0
    kthread+0x111/0x130

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org
Link: https://lkml.kernel.org/r/d72b41309f077c8d3bee6cc08ad3662d50b5d22a.1529828292.git.lukas@wunner.de
2018-06-24 14:17:27 +02:00
Lukas Wunner 836557bd58 genirq: Update code comments wrt recycled thread_mask
Previously a race existed between __free_irq() and __setup_irq() wherein
the thread_mask of a just removed action could be handed out to a newly
added action and the freed irq thread would then tread on the oneshot
mask bit of the newly added irq thread in irq_finalize_oneshot():

time
 |  __free_irq()
 |    raw_spin_lock_irqsave(&desc->lock, flags);
 |    <remove action from linked list>
 |    raw_spin_unlock_irqrestore(&desc->lock, flags);
 |
 |  __setup_irq()
 |    raw_spin_lock_irqsave(&desc->lock, flags);
 |    <traverse linked list to determine oneshot mask bit>
 |    raw_spin_unlock_irqrestore(&desc->lock, flags);
 |
 |  irq_thread() of freed irq (__free_irq() waits in synchronize_irq())
 |    irq_thread_fn()
 |      irq_finalize_oneshot()
 |        raw_spin_lock_irq(&desc->lock);
 |        desc->threads_oneshot &= ~action->thread_mask;
 |        raw_spin_unlock_irq(&desc->lock);
 v

The race was known at least since 2012 when it was documented in a code
comment by commit e04268b0ef ("genirq: Remove paranoid warnons and bogus
fixups"). The race itself is harmless as nothing touches any of the
potentially freed data after synchronize_irq().

In 2017 the race was close by commit 9114014cf4 ("genirq: Add mutex to
irq desc to serialize request/free_irq()"), apparently inadvertantly so
because the race is neither mentioned in the commit message nor was the
code comment updated.  Make up for that.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org
Link: https://lkml.kernel.org/r/32fc25aa35ecef4b2692f57687bb7fc2a57230e2.1529828292.git.lukas@wunner.de
2018-06-24 14:17:26 +02:00
Jonathan Neuschäfer 0a13ec0bbc genirq: Fix editing error in a comment
When the comment was reflowed to a wider format, the "*" snuck in.

Fixes: ae88a23b32 ("irq: refactor and clean up the free_irq() code flow")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180617124018.25539-1-j.neuschaefer@gmx.net
2018-06-19 09:19:41 +02:00
Linus Torvalds f4e5b30d80 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 updates and fixes from Thomas Gleixner:

 - Fix the (late) fallout from the vector management rework causing
   hlist corruption and irq descriptor reference leaks caused by a
   missing sanity check.

   The straight forward fix triggered another long standing issue to
   surface. The pre rework code hid the issue due to being way slower,
   but now the chance that user space sees an EBUSY error return when
   updating irq affinities is way higher, though quite a bunch of
   userspace tools do not handle it properly despite the fact that EBUSY
   could be returned for at least 10 years.

   It turned out that the EBUSY return can be avoided completely by
   utilizing the existing delayed affinity update mechanism for irq
   remapped scenarios as well. That's a bit more error handling in the
   kernel, but avoids fruitless fingerpointing discussions with tool
   developers.

 - Decouple PHYSICAL_MASK from AMD SME as its going to be required for
   the upcoming Intel memory encryption support as well.

 - Handle legacy device ACPI detection properly for newer platforms

 - Fix the wrong argument ordering in the vector allocation tracepoint

 - Simplify the IDT setup code for the APIC=n case

 - Use the proper string helpers in the MTRR code

 - Remove a stale unused VDSO source file

 - Convert the microcode update lock to a raw spinlock as its used in
   atomic context.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel_rdt: Enable CMT and MBM on new Skylake stepping
  x86/apic/vector: Print APIC control bits in debugfs
  genirq/affinity: Defer affinity setting if irq chip is busy
  x86/platform/uv: Use apic_ack_irq()
  x86/ioapic: Use apic_ack_irq()
  irq_remapping: Use apic_ack_irq()
  x86/apic: Provide apic_ack_irq()
  genirq/migration: Avoid out of line call if pending is not set
  genirq/generic_pending: Do not lose pending affinity update
  x86/apic/vector: Prevent hlist corruption and leaks
  x86/vector: Fix the args of vector_alloc tracepoint
  x86/idt: Simplify the idt_setup_apic_and_irq_gates()
  x86/platform/uv: Remove extra parentheses
  x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME
  x86: Mark native_set_p4d() as __always_inline
  x86/microcode: Make the late update update_lock a raw lock for RT
  x86/mtrr: Convert to use strncpy_from_user() helper
  x86/mtrr: Convert to use match_string() helper
  x86/vdso: Remove unused file
  x86/i8237: Register device based on FADT legacy boot flag
2018-06-10 09:44:53 -07:00
Thomas Gleixner 12f47073a4 genirq/affinity: Defer affinity setting if irq chip is busy
The case that interrupt affinity setting fails with -EBUSY can be handled
in the kernel completely by using the already available generic pending
infrastructure.

If a irq_chip::set_affinity() fails with -EBUSY, handle it like the
interrupts for which irq_chip::set_affinity() can only be invoked from
interrupt context. Copy the new affinity mask to irq_desc::pending_mask and
set the affinity pending bit. The next raised interrupt for the affected
irq will check the pending bit and try to set the new affinity from the
handler. This avoids that -EBUSY is returned when an affinity change is
requested from user space and the previous change has not been cleaned
up. The new affinity will take effect when the next interrupt is raised
from the device.

Fixes: dccfe3147b ("x86/vector: Simplify vector move cleanup")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Song Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.819273597@linutronix.de
2018-06-06 15:18:22 +02:00
Sebastian Andrzej Siewior 47b82e8818 ide: don't enable/disable interrupts in force threaded-IRQ mode
The interrupts are enabled/disabled so the interrupt handler can run
with enabled interrupts while serving the interrupt and not lose other
interrupts especially the timer tick.
If the system runs with force-threaded interrupts then there is no need
to enable the interrupts.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05 16:26:47 -04:00
Thomas Gleixner 52a65ff560 genirq: Add missing SPDX identifiers
Add SPDX identifiers to files

 - which contain an explicit license boiler plate or reference

 - which do not contain a license reference and were not updated in the
   initial SPDX conversion because the license was deduced by the scanners
   via EXPORT_SYMBOL_GPL as GPL2.0 only.

[ tglx: Moved adding identifiers from the patch which removes the
  	references/boilerplate ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.668321222@linutronix.de
2018-03-20 14:23:28 +01:00
Thomas Gleixner 99bfce5db9 genirq: Cleanup top of file comments
Remove pointless references to the file name itself and condense the
information so it wastes less space.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.412095827@linutronix.de
2018-03-20 14:23:27 +01:00
Uwe Kleine König 83ac4ca943 genirq: Pass desc to __irq_free instead of irq number
Given that irq_to_desc() is a radix_tree_lookup and the reverse
operation is only a pointer dereference and that all callers of
__free_irq already have the desc, pass the desc instead of the irq
number.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel@pengutronix.de
Link: https://lkml.kernel.org/r/20180319105202.9794-1-u.kleine-koenig@pengutronix.de
2018-03-20 08:52:44 +01:00
Thomas Gleixner cbf8699996 genirq: Let irq thread follow the effective hard irq affinity
In case of threaded interrupts the thread follows the affinity setting of
the hard interrupt. The related function uses the affinity mask which was
set by either from user space or via one of the kernel mechanisms. This
mask can be wider than the resulting effective affinity of the hard
interrupt. As a consequence the thread might become affine to a completely
different CPU.

Use the effective interrupt affinity if the architecture supports it, so
the hard interrupt and the thread stay on the same CPU.

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2018-02-16 15:28:50 +01:00
Thomas Gleixner 41cc30412d irqchip updates for 4.15, take #4
- A core irq fix for legacy cases where the irq trigger is not reported
   by firmware
 - A couple of GICv3/4 fixes (Kconfig, of-node refcount, error handling)
 - Trivial pr_err fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAloJ2UYVHG1hcmMuenlu
 Z2llckBhcm0uY29tAAoJECPQ0LrRPXpDtkcP/i2HrgT5CmoA315h5HLXfFImxZwg
 YG7ti3zqu1TM7HXNlfBgSltqiU5UgYOd2KjgUR+w30t1239DwxVdtoy6ZgGWXlfe
 xmHlXAiEDkqaAV3P/RHKkl8xRDkyWhKmfY1ym/So0J68EPytuiZiT4wJZO39u/xk
 Gi2fW38gywl4bEb9MA48noEnkNkr93DjJfFyiPxPYiAaWeFRoP+X5l171kTpCdSv
 sT5hfQvfsz7mQZVecMBwGg6QuWnlUplkzPb4lNhuk/tJTU97vf3Py8abzeiGqBMa
 5NoH9PUMZs0L8kv6DgR2DEOmhmmk0+mwO7VWVT3eVtYoxSS8oW0i2OzgB9kCOy8+
 LZi+M0fMSL6hiAgwlV5YrHYvsVl2rGjCNAqC+q2ggpW4XH9Kql2caki331mGqAyr
 qDeI0SWaABz5c9ajtsfQ78T0FE70xwIJ5TT1RmtKt2LFCpJjBacjK3vUST2ypIrF
 k0AJTmBwEefKNvxTrjkZtenblCVo92lT+boAv7HuI612NicVSBEsK7S+96kGlGMw
 KNi+cwGriJRWIbsn+VMpLFGyPgEmWQ1p/4Z/tkwSevqOl/k8KrNw6+VoyDS1PmJU
 gIQ0hh8wMnm2l9VGJARc0+pHKr0KYN52j+jZI5+OGNKKAZ0jGYI4t2JiemtOwmet
 q2KNdm6mvBYUYirj
 =/8DQ
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip updates for 4.15, take #4 from Marc Zyngier

 - A core irq fix for legacy cases where the irq trigger is not reported
   by firmware

 - A couple of GICv3/4 fixes (Kconfig, of-node refcount, error handling)

 - Trivial pr_err fixes
2017-11-14 11:23:05 +01:00
Linus Torvalds 670310dfba Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
 "A rather large update for the interrupt core code and the irq chip drivers:

   - Add a new bitmap matrix allocator and supporting changes, which is
     used to replace the x86 vector allocator which comes with separate
     pull request. This allows to replace the convoluted nested loop
     allocation function in x86 with a facility which supports the
     recently added property of managed interrupts proper and allows to
     switch to a best effort vector reservation scheme, which addresses
     problems with vector exhaustion.

   - A large update to the ARM GIC-V3-ITS driver adding support for
     range selectors.

   - New interrupt controllers:
       - Meson and Meson8 GPIO
       - BCM7271 L2
       - Socionext EXIU

     If you expected that this will stop at some point, I have to
     disappoint you. There are new ones posted already. Sigh!

   - STM32 interrupt controller support for new platforms.

   - A pile of fixes, cleanups and updates to the MIPS GIC driver

   - The usual small fixes, cleanups and updates all over the place.
     Most visible one is to move the irq chip drivers Kconfig switches
     into a separate Kconfig menu"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
  genirq: Fix type of shifting literal 1 in __setup_irq()
  irqdomain: Drop pointless NULL check in virq_debug_show_one
  genirq/proc: Return proper error code when irq_set_affinity() fails
  irq/work: Use llist_for_each_entry_safe
  irqchip: mips-gic: Print warning if inherited GIC base is used
  irqchip/mips-gic: Add pr_fmt and reword pr_* messages
  irqchip/stm32: Move the wakeup on interrupt mask
  irqchip/stm32: Fix initial values
  irqchip/stm32: Add stm32h7 support
  dt-bindings/interrupt-controllers: Add compatible string for stm32h7
  irqchip/stm32: Add multi-bank management
  irqchip/stm32: Select GENERIC_IRQ_CHIP
  irqchip/exiu: Add support for Socionext Synquacer EXIU controller
  dt-bindings: Add description of Socionext EXIU interrupt controller
  irqchip/gic-v3-its: Fix VPE activate callback return value
  irqchip: mips-gic: Make IPI bitmaps static
  irqchip: mips-gic: Share register writes in gic_set_type()
  irqchip: mips-gic: Remove gic_vpes variable
  irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs
  irqchip: mips-gic: Configure EIC when CPUs come online
  ...
2017-11-13 17:33:11 -08:00
Rasmus Villemoes ffc661c99f genirq: Fix type of shifting literal 1 in __setup_irq()
If ffz() ever returns a value >= 31 then the following shift is undefined
behaviour because the literal 1 which gets shifted is treated as signed
integer.

In practice, the bug is probably harmless, since the first undefined shift
count is 31 which results - ignoring UB - in (int)(0x80000000). This gets
sign extended so bit 32-63 will be set as well and all subsequent
__setup_irq() calls would just end up hitting the -EBUSY branch.

However, a sufficiently aggressive optimizer may use the UB of 1<<31
to decide that doesn't happen, and hence elide the sign-extension
code, so that subsequent calls can indeed get ffz > 31.

In any case, the right thing to do is to make the literal 1UL.

[ tglx: For this to happen a single interrupt would have to be shared by 32
  	devices. Hardware like that does not exist and would have way more
  	problems than that. ]

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20171030213548.16831-1-linux@rasmusvillemoes.dk
2017-11-12 23:25:40 +01:00
Marc Zyngier 4f8413a3a7 genirq: Track whether the trigger type has been set
When requesting a shared interrupt, we assume that the firmware
support code (DT or ACPI) has called irqd_set_trigger_type
already, so that we can retrieve it and check that the requester
is being reasonnable.

Unfortunately, we still have non-DT, non-ACPI systems around,
and these guys won't call irqd_set_trigger_type before requesting
the interrupt. The consequence is that we fail the request that
would have worked before.

We can either chase all these use cases (boring), or address it
in core code (easier). Let's have a per-irq_desc flag that
indicates whether irqd_set_trigger_type has been called, and
let's just check it when checking for a shared interrupt.
If it hasn't been set, just take whatever the interrupt
requester asks.

Fixes: 382bd4de61 ("genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-10 09:49:48 +00:00
Christoffer Dall 250a53d6fc genirq: Document vcpu_info usage for percpu_devid interrupts
It is currently unclear how to set the VCPU affinity for a percpu_devid
interrupt , since the Linux irq_data structure describes the state for
multiple interrupts, one for each physical CPU on the system.  Since
each such interrupt can be associated with different VCPUs or none at
all, associating a single VCPU state with such an interrupt does not
capture the necessary semantics.

The implementers of irq_set_affinity are the Intel and AMD IOMMUs, and
the ARM GIC irqchip.  The Intel and AMD callers do not appear to use
percpu_devid interrupts, and the ARM GIC implementation only checks the
pointer against NULL vs. non-NULL.

Therefore, simply update the function documentation to explain the
expected use in the context of percpu_devid interrupts, allowing future
changes or additions to irqchip implementers to do the right thing.

Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvm@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/1509093281-15225-13-git-send-email-cdall@linaro.org
2017-10-29 16:18:37 +01:00
Thomas Gleixner e43b3b5854 genirq/cpuhotplug: Enforce affinity setting on startup of managed irqs
Managed interrupts can end up in a stale state on CPU hotplug. If the
interrupt is not targeting a single CPU, i.e. the affinity mask spawns
multiple CPUs then the following can happen:

After boot:

dstate:   0x01601200
            IRQD_ACTIVATED
            IRQD_IRQ_STARTED
            IRQD_SINGLE_TARGET
            IRQD_AFFINITY_SET
            IRQD_AFFINITY_MANAGED
node:     0
affinity: 24-31
effectiv: 24
pending:  0

After offlining CPU 31 - 24

dstate:   0x01a31000
            IRQD_IRQ_DISABLED
            IRQD_IRQ_MASKED
            IRQD_SINGLE_TARGET
            IRQD_AFFINITY_SET
            IRQD_AFFINITY_MANAGED
            IRQD_MANAGED_SHUTDOWN
node:     0
affinity: 24-31
effectiv: 24
pending:  0

Now CPU 25 gets onlined again, so it should get the effective interrupt
affinity for this interruopt, but due to the x86 interrupt affinity setter
restrictions this ends up after restarting the interrupt with:

dstate:   0x01601300
            IRQD_ACTIVATED
            IRQD_IRQ_STARTED
            IRQD_SINGLE_TARGET
            IRQD_AFFINITY_SET
            IRQD_SETAFFINITY_PENDING
            IRQD_AFFINITY_MANAGED
node:     0
affinity: 24-31
effectiv: 24
pending:  24-31

So the interrupt is still affine to CPU 24, which was the last CPU to go
offline of that affinity set and the move to an online CPU within 24-31,
in this case 25, is pending. This mechanism is x86/ia64 specific as those
architectures cannot move interrupts from thread context and do this when
an interrupt is actually handled. So the move is set to pending.

Whats worse is that offlining CPU 25 again results in:

dstate:   0x01601300
            IRQD_ACTIVATED
            IRQD_IRQ_STARTED
            IRQD_SINGLE_TARGET
            IRQD_AFFINITY_SET
            IRQD_SETAFFINITY_PENDING
            IRQD_AFFINITY_MANAGED
node:     0
affinity: 24-31
effectiv: 24
pending:  24-31

This means the interrupt has not been shut down, because the outgoing CPU
is not in the effective affinity mask, but of course nothing notices that
the effective affinity mask is pointing at an offline CPU.

In the case of restarting a managed interrupt the move restriction does not
apply, so the affinity setting can be made unconditional. This needs to be
done _before_ the interrupt is started up as otherwise the condition for
moving it from thread context would not longer be fulfilled.

With that change applied onlining CPU 25 after offlining 31-24 results in:

dstate:   0x01600200
            IRQD_ACTIVATED
            IRQD_IRQ_STARTED
            IRQD_SINGLE_TARGET
            IRQD_AFFINITY_MANAGED
node:     0
affinity: 24-31
effectiv: 25
pending:  

And after offlining CPU 25:

dstate:   0x01a30000
            IRQD_IRQ_DISABLED
            IRQD_IRQ_MASKED
            IRQD_SINGLE_TARGET
            IRQD_AFFINITY_MANAGED
            IRQD_MANAGED_SHUTDOWN
node:     0
affinity: 24-31
effectiv: 25
pending:  

which is the correct and expected result.

Fixes: 761ea388e8 ("genirq: Handle managed irqs gracefully in irq_startup()")
Reported-by: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: axboe@kernel.dk
Cc: linux-scsi@vger.kernel.org
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: mpe@ellerman.id.au
Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: keith.busch@intel.com
Cc: peterz@infradead.org
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
2017-10-09 13:26:48 +02:00
Thomas Gleixner 19e1d4e947 genirq: Warn when effective affinity is not updated
Emit a one time warning when the effective affinity mask is enabled in
Kconfig, but the interrupt chip does not update the mask in its
irq_set_affinity() callback,

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
2017-10-09 13:26:48 +02:00
Thomas Gleixner c942cee46b genirq: Separate activation and startup
Activation of an interrupt and startup are currently a combo
functionlity. That works so far, but upcoming changes require a strict
separation because the activation can fail in future.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Yu Chen <yu.c.chen@intel.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213152.754334077@linutronix.de
2017-09-25 20:38:24 +02:00
Thomas Gleixner e0b477941d genirq/debugfs: Show debug information for all irq descriptors
Currently the debugfs shows only information about actively used interrupts
like /proc/irq/ does. That's fine for most cases, but not helpful when
internals of allocated, but unused interrupt descriptors have to
debugged. It's also useful to provide information about all descriptors so
leaks can be debugged in a simpler way.

Move the debugfs registration to the descriptor allocation code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Yu Chen <yu.c.chen@intel.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213152.355525908@linutronix.de
2017-09-25 20:38:22 +02:00
Alexandru Moise 2827a418ca genirq: Check __free_irq() return value for NULL
__free_irq() can return a NULL irqaction for example when trying to free
already-free IRQ, but the callsite unconditionally dereferences the
returned pointer.

Fix this by adding a check and return NULL.

Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20170919200412.GA29985@gmail.com
2017-09-25 16:40:31 +02:00
Marc Zyngier 0abce64a55 genirq: Let irq_set_vcpu_affinity() iterate over hierarchy
When assigning an interrupt to a vcpu, it is not unlikely that
the level of the hierarchy implementing irq_set_vcpu_affinity
is not the top level (think a generic MSI domain on top of a
virtualization aware interrupt controller).

In such a case, let's iterate over the hierarchy until we find
an irqchip implementing it.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-23 11:09:14 +01:00
Thomas Gleixner 19d39a3810 genirq: Keep chip buslock across irq_request/release_resources()
Moving the irq_request/release_resources() callbacks out of the spinlocked,
irq disabled and bus locked region, unearthed an interesting abuse of the
irq_bus_lock/irq_bus_sync_unlock() callbacks.

The OMAP GPIO driver does merily power management inside of them. The
irq_request_resources() callback of this GPIO irqchip calls a function
which reads a GPIO register. That read aborts now because the clock of the
GPIO block is not magically enabled via the irq_bus_lock() callback.

Move the callbacks under the bus lock again to prevent this. In the
free_irq() path this requires to drop the bus_lock before calling
synchronize_irq() and reaquiring it before calling the
irq_release_resources() callback.

The bus lock can't be held because:

   1) The data which has been changed between bus_lock/un_lock is cached in
      the irq chip driver private data and needs to go out to the irq chip
      via the slow bus (usually SPI or I2C) before calling
      synchronize_irq().

      That's the reason why this bus_lock/unlock magic exists in the first
      place, as you cannot do SPI/I2C transactions while holding desc->lock
      with interrupts disabled.

   2) synchronize_irq() will actually deadlock, if there is a handler on
      flight. These chips use threaded handlers for obvious reasons, as
      they allow to do SPI/I2C communication. When the threaded handler
      returns then bus_lock needs to be taken in irq_finalize_oneshot() as
      we need to talk to the actual irq chip once more. After that the
      threaded handler is marked done, which makes synchronize_irq() return.

      So if we hold bus_lock accross the synchronize_irq() call, the
      handler cannot mark itself done because it blocks on the bus
      lock. That in turn makes synchronize_irq() wait forever on the
      threaded handler to complete....

Add the missing unlock of desc->request_mutex in the error path of
__free_irq() and add a bunch of comments to explain the locking and
protection rules.

Fixes: 46e48e2573 ("genirq: Move irq resource handling out of spinlocked region")
Reported-and-tested-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reported-and-tested-by: Tony Lindgren <tony@atomide.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not-longer-ranted-at-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
2017-07-12 10:14:42 +02:00
Daniel Lezcano c80081b920 genirq: Allow to pass the IRQF_TIMER flag with percpu irq request
The irq timings infrastructure tracks when interrupts occur in order to
statistically predict te next interrupt event.

There is no point to track timer interrupts and try to predict them because
the next expiration time is already known. This can be avoided via the
IRQF_TIMER flag which is passed by timer drivers in request_irq(). It marks
the interrupt as timer based which alloes to ignore these interrupts in the
timings code.

Per CPU interrupts which are requested via request_percpu_+irq() have no
flag argument, so marking per cpu timer interrupts is not possible and they
get tracked pointlessly.

Add __request_percpu_irq() as a variant of request_percpu_irq() with a
flags argument and make request_percpu_irq() an inline wrapper passing
flags = 0.

The flag parameter is restricted to IRQF_TIMER as all other IRQF_ flags
make no sense for per cpu interrupts.

The next step is to convert all existing users of request_percpu_irq() and
then remove the wrapper and the underscores.

[ tglx: Massaged changelog ]

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: nicolas.pitre@linaro.org
Cc: vincent.guittot@linaro.org
Cc: rafael@kernel.org
Link: http://lkml.kernel.org/r/1499344144-3964-1-git-send-email-daniel.lezcano@linaro.org
2017-07-06 23:16:22 +02:00
Thomas Gleixner 2343877fbd genirq/timings: Move free timings out of spinlocked region
No point to do memory management from a interrupt disabled spin locked
region.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Julia Cartwright <julia@ni.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: linux-rockchip@lists.infradead.org
Cc: John Keeping <john@metanate.com>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/20170629214344.196130646@linutronix.de
2017-07-04 12:46:16 +02:00
Thomas Gleixner 46e48e2573 genirq: Move irq resource handling out of spinlocked region
Aside of being conceptually wrong, there is also an actual (hard to
trigger and mostly theoretical) problem.

CPU0				CPU1
free_irq(X)			interrupt X
				spin_lock(desc->lock)
				wake irq thread()
				spin_unlock(desc->lock)
spin_lock(desc->lock)
remove action()
shutdown_irq()			
release_resources()		thread_handler()
spin_unlock(desc->lock)		  access released resources.

synchronize_irq()

Move the release resources invocation after synchronize_irq() so it's
guaranteed that the threaded handler has finished.

Move the resource request call out of the desc->lock held region as well,
so the invocation context is the same for both request and release.

This solves the problems with those functions on RT as well.
 
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Julia Cartwright <julia@ni.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: linux-rockchip@lists.infradead.org
Cc: John Keeping <john@metanate.com>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/20170629214344.117028181@linutronix.de
2017-07-04 12:46:16 +02:00
Thomas Gleixner 9114014cf4 genirq: Add mutex to irq desc to serialize request/free_irq()
The irq_request/release_resources() callbacks ar currently invoked under
desc->lock with interrupts disabled. This is a source of problems on RT and
conceptually not required.

Add a seperate mutex to struct irq_desc which allows to serialize
request/free_irq(), which can be used to move the resource functions out of
the desc->lock held region.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Julia Cartwright <julia@ni.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: linux-rockchip@lists.infradead.org
Cc: John Keeping <john@metanate.com>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/20170629214344.039220922@linutronix.de
2017-07-04 12:46:16 +02:00
Thomas Gleixner 3a90795e1e genirq: Move bus locking into __setup_irq()
There is no point in having the irq_bus_lock() protection around all
callers to __setup_irq().

Move it into __setup_irq(). This is also a preparatory patch for addressing
the issues with the irq resource callbacks.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Julia Cartwright <julia@ni.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: linux-rockchip@lists.infradead.org
Cc: John Keeping <john@metanate.com>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/20170629214343.960949031@linutronix.de
2017-07-04 12:46:15 +02:00
Daniel Lezcano b2d3d61adb genirq/timings: Add infrastructure to track the interrupt timings
The interrupt framework gives a lot of information about each interrupt. It
does not keep track of when those interrupts occur though, which is a
prerequisite for estimating the next interrupt arrival for power management
purposes.

Add a mechanism to record the timestamp for each interrupt occurrences in a
per-CPU circular buffer to help with the prediction of the next occurrence
using a statistical model.

Each CPU can store up to IRQ_TIMINGS_SIZE events <irq, timestamp>, the
current value of IRQ_TIMINGS_SIZE is 32.

Each event is encoded into a single u64, where the high 48 bits are used
for the timestamp and the low 16 bits are for the irq number.

A static key is introduced so when the irq prediction is switched off at
runtime, the overhead is near to zero.

It results in most of the code in internals.h for inline reasons and a very
few in the new file timings.c. The latter will contain more in the next patch
which will provide the statistical model for the next event prediction.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: "Rafael J . Wysocki" <rafael@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org
2017-06-24 11:44:11 +02:00
Thomas Gleixner 4cde9c6b82 genirq: Add force argument to irq_startup()
In order to handle managed interrupts gracefully on irq_startup() so they
won't lose their assigned affinity, it's necessary to allow startups which
keep the interrupts in managed shutdown state, if none of the assigend CPUs
is online. This allows drivers to request interrupts w/o the CPUs being
online, which avoid online/offline churn in drivers.

Add a force argument which can override that decision and let only
request_irq() and enable_irq() allow the managed shutdown
handling. enable_irq() is required, because the interrupt might be
requested with IRQF_NOAUTOEN and enable_irq() invokes irq_startup() which
would then wreckage the assignment again. All other callers force startup
and potentially break the assigned affinity.

No functional change as this only adds the function argument.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235447.112094565@linutronix.de
2017-06-22 18:21:24 +02:00
Christoph Hellwig 137221df69 genirq: Move pending helpers to internal.h
So that the affinity code can reuse them.


Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619235445.109426284@linutronix.de
2017-06-22 18:21:15 +02:00
Thomas Gleixner 2e051552df genirq: Move initial affinity setup to irq_startup()
The startup vs. setaffinity ordering of interrupts depends on the
IRQF_NOAUTOEN flag. Chained interrupts are not getting any affinity
assignment at all.

A regular interrupt is started up and then the affinity is set. A
IRQF_NOAUTOEN marked interrupt is not started up, but the affinity is set
nevertheless.

Move the affinity setup to startup_irq() so the ordering is always the same
and chained interrupts get the proper default affinity assigned as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235445.020534783@linutronix.de
2017-06-22 18:21:15 +02:00
Thomas Gleixner 43564bd97d genirq: Rename setup_affinity() to irq_setup_affinity()
Rename it with a proper irq_ prefix and make it available for other files
in the core code. Preparatory patch for moving the irq affinity setup
around.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235444.928501004@linutronix.de
2017-06-22 18:21:14 +02:00
Thomas Gleixner cba4235e60 genirq: Remove mask argument from setup_affinity()
No point to have this alloc/free dance of cpumasks. Provide a static mask
for setup_affinity() and protect it proper.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235444.851571573@linutronix.de
2017-06-22 18:21:14 +02:00
Thomas Gleixner 087cdfb662 genirq/debugfs: Add proper debugfs interface
Debugging (hierarchical) interupt domains is tedious as there is no
information about the hierarchy and no information about states of
interrupts in the various domain levels.

Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'.

The domains directory contains the domain files. The content is information
about the domain. If the domain is part of a hierarchy then the parent
domains are printed as well.

# ls /sys/kernel/debug/irq/domains/
default     INTEL-IR-2	    INTEL-IR-MSI-2  IO-APIC-IR-2  PCI-MSI
DMAR-MSI    INTEL-IR-3	    INTEL-IR-MSI-3  IO-APIC-IR-3  unknown-1
INTEL-IR-0  INTEL-IR-MSI-0  IO-APIC-IR-0    IO-APIC-IR-4  VECTOR
INTEL-IR-1  INTEL-IR-MSI-1  IO-APIC-IR-1    PCI-HT

# cat /sys/kernel/debug/irq/domains/VECTOR 
name:   VECTOR
 size:   0
 mapped: 216
 flags:  0x00000041

# cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 
name:   IO-APIC-IR-0
 size:   24
 mapped: 19
 flags:  0x00000041
 parent: INTEL-IR-3
    name:   INTEL-IR-3
     size:   65536
     mapped: 167
     flags:  0x00000041
     parent: VECTOR
        name:   VECTOR
         size:   0
         mapped: 216
         flags:  0x00000041

Unfortunately there is no per cpu information about the VECTOR domain (yet).

The irqs directory contains detailed information about mapped interrupts.

# cat /sys/kernel/debug/irq/irqs/3
handler:  handle_edge_irq
status:   0x00004000
istate:   0x00000000
ddepth:   1
wdepth:   0
dstate:   0x01018000
            IRQD_IRQ_DISABLED
            IRQD_SINGLE_TARGET
            IRQD_MOVE_PCNTXT
node:     0
affinity: 0-143
effectiv: 0
pending:  
domain:  IO-APIC-IR-0
 hwirq:   0x3
 chip:    IR-IO-APIC
  flags:   0x10
             IRQCHIP_SKIP_SET_WAKE
 parent:
    domain:  INTEL-IR-3
     hwirq:   0x20000
     chip:    INTEL-IR
      flags:   0x0
     parent:
        domain:  VECTOR
         hwirq:   0x3
         chip:    APIC
          flags:   0x0

This was developed to simplify the debugging of the managed affinity
changes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-22 18:21:13 +02:00
Thomas Gleixner b50fb7c992 Merge branch 'linus' into irq/core
Get upstream changes so pending patches won't conflict.
2017-06-20 22:08:32 +02:00
Heiner Kallweit fa07ab72cb genirq: Release resources in __setup_irq() error path
In case __irq_set_trigger() fails the resources requested via
irq_request_resources() are not released.

Add the missing release call into the error handling path.

Fixes: c1bacbae81 ("genirq: Provide irq_request/release_resources chip callbacks")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/655538f5-cb20-a892-ff15-fbd2dd1fa4ec@gmail.com
2017-06-13 00:40:39 +02:00
Thomas Gleixner 04c848d398 genirq: Warn when IRQ_NOAUTOEN is used with shared interrupts
Shared interrupts do not go well with disabling auto enable:

1) The sharing interrupt might request it while it's still disabled and
   then wait for interrupts forever.

2) The interrupt might have been requested by the driver sharing the line
   before IRQ_NOAUTOEN has been set. So the driver which expects that
   disabled state after calling request_irq() will not get what it wants.
   Even worse, when it calls enable_irq() later, it will trigger the
   unbalanced enable_irq() warning.

Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dianders@chromium.org
Cc: jeffy <jeffy.chen@rock-chips.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: tfiga@chromium.org
Link: http://lkml.kernel.org/r/20170531100212.210682135@linutronix.de
2017-06-04 14:38:41 +02:00
Thomas Gleixner 201d7f47f3 genirq: Handle NOAUTOEN interrupt setup proper
If an interrupt is marked NOAUTOEN then request_irq() installs the action,
but does not enable the interrupt via startup_irq().  The interrupt is
enabled via enable_irq() later from the driver. enable_irq() calls
irq_enable().

That means that for interrupts which have a irq_startup() callback this
callback is never invoked. Neither is irq_domain_activate_irq() invoked for
such interrupts.

If an interrupt depends on irq_startup() or irq_domain_activate_irq() then
the enable via irq_enable() is not enough.

Add a status flag IRQD_IRQ_STARTED_UP and use this to select the proper
mechanism in enable_irq(). Use the flag also to avoid pointless calls into
the low level functions.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: dianders@chromium.org
Cc: jeffy <jeffy.chen@rock-chips.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: tfiga@chromium.org
Link: http://lkml.kernel.org/r/20170531100212.130986205@linutronix.de
2017-06-04 14:35:13 +02:00
Linus Torvalds 857f864014 pci-v4.12-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZEHmsAAoJEFmIoMA60/r88SgQAJbFddueb0+DfJ+USDud4b/Z
 akfS+G1UAm+TgtMyh1wM49dHzFssp36uWJxtWI+bPqBzuy94PMCbz7JVUV28gX9G
 tFhFuc5YH94I/3y85rbZnolb6uZN9MhLjzTFqDC9ilW6HFqmwK4t4wlHSCjQN1St
 svLYvs2G6n6/VK3Fre7/wOvdZ1erG4Qod+kn5Tx3K5TQydmRlaSBfK+DRANuDBkM
 KzGO7Bkc/Cx8hb9pHmaey/wxmNrrgmVjTtWrEnb2tEq833zP4h6GhUIJEKodMSi5
 gXPNZgKlu3n5L592M0UCh4EoHejzkv9wrcsoDm+djmsc5Zg2Howq4kAdHP8k4hUG
 0gt8n0ni9vhJN56jikrGi7cAdHCKSNnx2Ue/qTCbX0ncB3XUMuJxJwCsgW/6wa9f
 oU7tRtTS03UltnKoFAcyYclS4TaSY4SA4ySaK6Hi+cRkdVFDdyHQYbHHNSU7MsA+
 IS2tXvGoIdSYyrZMHSRcl2rRTfYQUkmPEvBF3LvqZr32M4mJMmUNAPLZaly373ZE
 iwq0ZJlrLeM0cqdFIG3S60RtJyQk/HBN1NMqrYHArWOxvWIgNd5F8NCsTTxY3wU3
 IxgBIuUFcbVwVkqEHGs8K5AvB3oghqdnA3eGOV79799eMtLn3LOvyIlpHMSw9WUq
 ags00JtMLitfNPBH3eSl
 =eE4D
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add framework for supporting PCIe devices in Endpoint mode (Kishon
   Vijay Abraham I)

 - use non-postable PCI config space mappings when possible (Lorenzo
   Pieralisi)

 - clean up and unify mmap of PCI BARs (David Woodhouse)

 - export and unify Function Level Reset support (Christoph Hellwig)

 - avoid FLR for Intel 82579 NICs (Sasha Neftin)

 - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)

 - short-circuit config access failures for disconnected devices (Keith
   Busch)

 - remove D3 sleep delay when possible (Adrian Hunter)

 - freeze PME scan before suspending devices (Lukas Wunner)

 - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)

 - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)

 - add arch-specific alignment control to improve device passthrough by
   avoiding multiple BARs in a page (Yongji Xie)

 - add sysfs sriov_drivers_autoprobe to control VF driver binding
   (Bodong Wang)

 - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)

 - fix crashes when unbinding host controllers that don't support
   removal (Brian Norris)

 - add driver for MicroSemi Switchtec management interface (Logan
   Gunthorpe)

 - add driver for Faraday Technology FTPCI100 host bridge (Linus
   Walleij)

 - add i.MX7D support (Andrey Smirnov)

 - use generic MSI support for Aardvark (Thomas Petazzoni)

 - make Rockchip driver modular (Brian Norris)

 - advertise 128-byte Read Completion Boundary support for Rockchip
   (Shawn Lin)

 - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)

 - convert atomic_t to refcount_t in HV driver (Elena Reshetova)

 - add CPU IRQ affinity in HV driver (K. Y. Srinivasan)

 - fix PCI bus removal in HV driver (Long Li)

 - add support for ThunderX2 DMA alias topology (Jayachandran C)

 - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)

 - add ITE 8893 bridge DMA alias quirk (Jarod Wilson)

 - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
   (Manish Jaggi)

* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
  PCI: Don't allow unbinding host controllers that aren't prepared
  ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  MAINTAINERS: Add PCI Endpoint maintainer
  Documentation: PCI: Add userguide for PCI endpoint test function
  tools: PCI: Add sample test script to invoke pcitest
  tools: PCI: Add a userspace tool to test PCI endpoint
  Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  misc: Add host side PCI driver for PCI test function device
  PCI: Add device IDs for DRA74x and DRA72x
  dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
  PCI: dwc: dra7xx: Workaround for errata id i870
  dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
  PCI: dwc: dra7xx: Add EP mode support
  PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
  dt-bindings: PCI: Add DT bindings for PCI designware EP mode
  PCI: dwc: designware: Add EP mode support
  Documentation: PCI: Add binding documentation for pci-test endpoint function
  ixgbe: Use pcie_flr() instead of duplicating it
  IB/hfi1: Use pcie_flr() instead of duplicating it
  PCI: imx6: Fix spelling mistake: "contol" -> "control"
  ...
2017-05-08 19:03:25 -07:00
Christoph Hellwig 25ce4be724 genirq: Return the IRQ name from free_irq()
This allows callers to get back at them instead of having to store it in
another variable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-18 13:40:00 -05:00
Christoph Hellwig a7e60e55d7 genirq: Fix indentation in remove_irq()
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-18 13:39:20 -05:00
Hans de Goede 382bd4de61 genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs
When requesting a shared irq with IRQF_TRIGGER_NONE then the irqaction
flags get filled with the trigger type from the irq_data:

        if (!(new->flags & IRQF_TRIGGER_MASK))
                new->flags |= irqd_get_trigger_type(&desc->irq_data);

On the first setup_irq() the trigger type in irq_data is NONE when the
above code executes, then the irq is started up for the first time and
then the actual trigger type gets established, but that's too late to fix
up new->flags.

When then a second user of the irq requests the irq with IRQF_TRIGGER_NONE
its irqaction's triggertype gets set to the actual trigger type and the
following check fails:

        if (!((old->flags ^ new->flags) & IRQF_TRIGGER_MASK))

Resulting in the request_irq failing with -EBUSY even though both
users requested the irq with IRQF_SHARED | IRQF_TRIGGER_NONE

Fix this by comparing the new irqaction's trigger type to the trigger type
stored in the irq_data which correctly reflects the actual trigger type
being used for the irq.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/20170415100831.17073-1-hdegoede@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-15 15:42:43 +02:00
Matthias Kaehlcke d170fe7dd9 genirq: Use cpumask_available() for check of cpumask variable
This fixes the following clang warning when CONFIG_CPUMASK_OFFSTACK=n:

kernel/irq/manage.c:839:28: error: address of array
'desc->irq_common_data.affinity' will always evaluate to 'true'
[-Werror,-Wpointer-bool-conversion]

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Cc: Grant Grundler <grundler@chromium.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Michael Davidson <md@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20170412182030.83657-2-mka@chromium.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-14 20:49:27 +02:00
Ingo Molnar 0881e7bd34 sched/headers: Prepare to move the get_task_struct()/put_task_struct() and related APIs from <linux/sched.h> to <linux/sched/task.h>
But first update usage sites with the new header dependency.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:40 +01:00
Ingo Molnar ae7e81c077 sched/headers: Prepare for new header dependencies before moving code to <uapi/linux/sched/types.h>
We are going to move scheduler ABI details to <uapi/linux/sched/types.h>,
which will be used from a number of .c files.

Create empty placeholder header that maps to <linux/types.h>.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:27 +01:00
Masahiro Yamada 9332ef9dbd scripts/spelling.txt: add "an user" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  an user||a user
  an userspace||a userspace

I also added "userspace" to the list since it is a common word in Linux.
I found some instances for "an userfaultfd", but I did not add it to the
list.  I felt it is endless to find words that start with "user" such as
"userland" etc., so must draw a line somewhere.

Link: http://lkml.kernel.org/r/1481573103-11329-4-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Thomas Gleixner 7ee7e87dfb genirq: Use irq type from irqdata instead of irqdesc
The type flags in the irq descriptor are there for historical reasons and
only updated via irq_modify_status() or irq_set_type(). Both functions also
update the type flags in irqdata. __setup_irq() is the only left over user
of the type flags in the irq descriptor.

If __setup_irq() is called with empty irq type flags, then the type flags
are retrieved from irqdata. If an interrupt is shared, then the type flags
are compared with the type flags stored in the irq descriptor. 

On x86 the ioapic does not have a irq_set_type() callback because the type
is defined in the BIOS tables and cannot be changed. The type is stored in
irqdata at setup time without updating the type data in the irq
descriptor. As a result the comparison described above fails.

There is no point in updating the irq descriptor flags because the only
relevant storage is irqdata. Use the type flags from irqdata for both
retrieval and comparison in __setup_irq() instead.

Aside of that the print out in case of non matching type flags has the old
and new type flags arguments flipped. Fix that as well.

For correctness sake the flags stored in the irq descriptor should be
removed, but this is beyond the scope of this bugfix and will be done in a
later patch.

Fixes: 4b357daed6 ("genirq: Look-up trigger type if not specified by caller")
Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1611072020360.3501@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-08 15:15:19 +01:00