This is a port of d9f966357b ("ARM: 7810/1: perf: Fix array out of
bounds access in armpmu_map_hw_event()") to arm64, which fixes an oops
in the arm64 perf backend found as a result of Vince's fuzzing tool.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Dave Hansen reported that systems between 500G and 600G RAM
crash early if DEBUG_PAGEALLOC is selected.
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x02086000, 0x02086fff] PGTABLE
> [ 0.000000] BRK [0x02087000, 0x02087fff] PGTABLE
> [ 0.000000] BRK [0x02088000, 0x02088fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0xe80ee00000-0xe80effffff]
> [ 0.000000] [mem 0xe80ee00000-0xe80effffff] page 4k
> [ 0.000000] BRK [0x02089000, 0x02089fff] PGTABLE
> [ 0.000000] BRK [0x0208a000, 0x0208afff] PGTABLE
> [ 0.000000] Kernel panic - not syncing: alloc_low_page: ran out of memory
It turns out that we missed increasing needed pages in BRK to
mapping initial 2M and [0,1M) when we switched to use the #PF
handler to set memory mappings:
> commit 8170e6bed4
> Author: H. Peter Anvin <hpa@zytor.com>
> Date: Thu Jan 24 12:19:52 2013 -0800
>
> x86, 64bit: Use a #PF handler to materialize early mappings on demand
Before that, we had the maping from [0,512M) in head_64.S, and we
can spare two pages [0-1M). After that change, we can not reuse
pages anymore.
When we have more than 512M ram, we need an extra page for pgd page
with [512G, 1024g).
Increase pages in BRK for page table to solve the boot crash.
Reported-by: Dave Hansen <dave.hansen@intel.com>
Bisected-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: <stable@vger.kernel.org> # v3.9 and later
Link: http://lkml.kernel.org/r/1376351004-4015-1-git-send-email-yinghai@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are possible HW configurations in which PFs will have SR-IOV capability
but will have Max VFs set to 0 - this happens when there are Multi-Function
devices where the VFs are allocated to only some of the PFs.
DMAE is configured to support VFs only if the configuring PF has supported VFs.
In case the first PF to be loaded will be one without supported VFs, it will
not configure DMAE to the VF-supporting mode. When VFs of other PFs will be
loaded later on, they will not be able to communicate with their PF.
This changes the requirement for configuring DMAE for VF-supporting mode;
If the device has SR-IOV capabilities there must be some PF that has
max supported VFs > 0, thus it will configure the DMAE for supporting VFs.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since SR-IOV can be activated dynamically and iproute2 can be called
asynchronously, the various callbacks need a robust sanity check before
attempting to access the SR-IOV database and members since there are numerous
states in which it can find the driver (e.g., PF is down, sriov was not enabled
yet, VF is down, etc.).
In many of the states the callback result will be null pointer dereference.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During probe, VFs might erroneously try to access the shared memory (which
only PFs are capabale of accessing), causing benign attentions to appear.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When publishing information via getfeatcfg(), bnx2x driver didn't consider
remote errors (e.g., switch that doesn't support DCBX) when setting the
error flags.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After notification that DCBX configuration has ended arrived to the driver,
the driver configured the FW/HW in sleepless context.
As a result, it was possible to reach a race (mostly with CNIC registration)
in which the configuration will return a timeout, failing to set the DCBX
results correctly.
This patch moves the configuration following the DCBX end into the slowpath
RTNL task (i.e., sleepless context protected by the RTNL lock), allowing the
configuration to cope with such races.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 3deb816 "bnx2x: Add a periodic task for link PHY events"
link state changes can be detected not only via the attention flow but also
from the periodic task.
If the link state will change in such a manner (i.e., via the periodic task),
dropless flow-control will not be configured.
This patch remedies the issue, adding the missing configuration to all required
flows.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is not allowed for an ipv6 packet to contain multiple fragmentation
headers. So discard packets which were already reassembled by
fragmentation logic and send back a parameter problem icmp.
The updates for RFC 6980 will come in later, I have to do a bit more
research here.
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because of the max_addresses check attackers were able to disable privacy
extensions on an interface by creating enough autoconfigured addresses:
<http://seclists.org/oss-sec/2012/q4/292>
But the check is not actually needed: max_addresses protects the
kernel to install too many ipv6 addresses on an interface and guards
addrconf_prefix_rcv to install further addresses as soon as this limit
is reached. We only generate temporary addresses in direct response of
a new address showing up. As soon as we filled up the maximum number of
addresses of an interface, we stop installing more addresses and thus
also stop generating more temp addresses.
Even if the attacker tries to generate a lot of temporary addresses
by announcing a prefix and removing it again (lifetime == 0) we won't
install more temp addresses, because the temporary addresses do count
to the maximum number of addresses, thus we would stop installing new
autoconfigured addresses when the limit is reached.
This patch fixes CVE-2013-0343 (but other layer-2 attacks are still
possible).
Thanks to Ding Tianhong to bring this topic up again.
Cc: Ding Tianhong <dingtianhong@huawei.com>
Cc: George Kargiotakis <kargig@void.gr>
Cc: P J P <ppandit@redhat.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only one fix in this pull request.
A straight forward incorrect read address in the adjd_s311 driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.20 (GNU/Linux)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=mWwS
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-3.11c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Third round of IIO fixes for the 3.11 series.
Only one fix in this pull request.
A straight forward incorrect read address in the adjd_s311 driver.
In the previous commit, Richard Genoud fixed proc_root_readdir(), which
had lost the check for whether all of the non-process /proc entries had
been returned or not.
But that in turn exposed _another_ bug, namely that the original readdir
conversion patch had yet another problem: it had lost the return value
of proc_readdir_de(), so now checking whether it had completed
successfully or not didn't actually work right anyway.
This reinstates the non-zero return for the "end of base entries" that
had also gotten lost in commit f0c3b5093a ("[readdir] convert
procfs"). So now you get all the base entries *and* you get all the
process entries, regardless of getdents buffer size.
(Side note: the Linux "getdents" manual page actually has a nice example
application for testing getdents, which can be easily modified to use
different buffers. Who knew? Man-pages can be useful)
Reported-by: Emmanuel Benisty <benisty.e@gmail.com>
Reported-by: Marc Dionne <marc.c.dionne@gmail.com>
Cc: Richard Genoud <richard.genoud@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit f6f91b0d9f ("ARM: allow kuser helpers to be removed from the
vector page") introduced some help text for the CONFIG_KUSER_HELPERS
option which is rather contradictory.
Let's fix that, and improve it a little.
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
In case of normal kexec kernel load, all cpu's are offlined
before calling machine_kexec().But in case crash panic cpus
are relaxed in machine_crash_nonpanic_core() SMP function
but not offlined.
When crash kernel is loaded with kexec and on panic trigger
machine_kexec() checks for number of cpus online.
If more than one cpu is online machine_kexec() fails to load
with below error
kexec: error: multiple CPUs still online
In machine_crash_nonpanic_core() SMP function, offline CPU
before cpu_relax
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 2ba85e7af4 (ARM: Fix FIQ code on VIVT CPUs) causes the following build warning:
arch/arm/kernel/fiq.c:92:3: warning: passing argument 1 of 'cpu_cache.coherent_kern_range' makes integer from pointer without a cast [enabled by default]
Cast it as '(unsigned long)base' to avoid the warning.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Yet another entry, just use the existing fixup for this machine, too.
Reported-by: "Nathanael D. Noblet" <nathanael@gnat.ca>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit f0c3b5093a ("[readdir] convert procfs") introduced a bug on the
listing of the proc file-system. The return value of proc_readdir()
isn't tested anymore in the proc_root_readdir function.
This lead to an "interesting" behaviour when we are using the getdents()
system call with a buffer too small: instead of failing, it returns the
first entries of /proc (enough to fill the given buffer), plus the PID
directories.
This is not triggered on glibc (as getdents is called with a 32KB
buffer), but on uclibc, the buffer size is only 1KB, thus some proc
entries are missing.
See https://lkml.org/lkml/2013/8/12/288 for more background.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Starting with kernel v3.5, it is mandatory
to specify ECC strength when using hardware
ECC. Without this, kernel panics with a warning
of the sort:
Driver must set ecc.strength when using hardware ECC
------------[ cut here ]------------
kernel BUG at drivers/mtd/nand/nand_base.c:3519!
Fix this by specifying ECC strength for the boards
which were missing this.
Reported-by: Holger Freyther <holger@freyther.de>
Cc: <stable@vger.kernel.org> #v3.5+
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Pull gfs2 fixes from Steven Whitehouse:
"Out of these five patches, the one for ensuring that the number of
revokes is not exceeded, and the one for checking the glock is not
already held in gfs2_getxattr are the two most important. The latter
can be triggered by selinux.
The other three patches are very small and fix mostly fairly trivial
issues"
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
GFS2: Check for glock already held in gfs2_getxattr
GFS2: alloc_workqueue() doesn't return an ERR_PTR
GFS2: don't overrun reserved revokes
GFS2: WQ_NON_REENTRANT is meaningless and going away
GFS2: Fix typo in gfs2_create_inode()
Pull x86 fixes from Ingo Molnar:
"Two AMD microcode loader fixes and an OLPC firmware support fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, microcode, AMD: Fix early microcode loading
x86, microcode, AMD: Make cpu_has_amd_erratum() use the correct struct cpuinfo_x86
x86: Don't clear olpc_ofw_header when sentinel is detected
Pull timer fixes from Ingo Molnar:
"Three small fixlets"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
nohz: fix compile warning in tick_nohz_init()
nohz: Do not warn about unstable tsc unless user uses nohz_full
sched_clock: Fix integer overflow
Pull drm fixes from Dave Airlie:
"Bit late with these, was under the weather for a a few days, nothing
too crazy:
Some radeon regression fixes, one intel regression fix, and one fix to
avoid a warn with i915 when used with dma-buf"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/i915: unpin backing storage in dmabuf_unmap
drm/radeon: fix WREG32_OR macro setting bits in a register
drm/radeon/r7xx: fix copy paste typo in golden register setup
drm/i915: Don't deref pipe->cpu_transcoder in the hangcheck code
drm/radeon: fix UVD message buffer validation
Fix new kernel-doc warnings in kernel/wait.c:
Warning(kernel/wait.c:374): No description found for parameter 'p'
Warning(kernel/wait.c:374): Excess function parameter 'word' description in 'wake_up_atomic_t'
Warning(kernel/wait.c:374): Excess function parameter 'bit' description in 'wake_up_atomic_t'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixing support for the Silicon Image 3826 port multiplier, by applying
to it the same quirks applied to the Silicon Image 3726. Specifically
fixes the repeated timeout/reset process which previously afflicted
the 3726, as described from line 290. Slightly based on notes from:
https://bugzilla.redhat.com/show_bug.cgi?id=890237
Signed-off-by: Terry Suereth <terry.suereth@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Since the introduction of atomic_open, gfs2_getxattr can be
called with the glock already held, so we need to allow for
this.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: David Teigland <teigland@redhat.com>
Tested-by: David Teigland <teigland@redhat.com>
alloc_workqueue() returns a NULL on error, it doesn't return an ERR_PTR.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When run during fsync, a gfs2_log_flush could happen between the
time when gfs2_ail_flush checked the number of blocks to revoke,
and when it actually started the transaction to do those revokes.
This occassionally caused it to need more revokes than it reserved,
causing gfs2 to crash.
Instead of just reserving enough revokes to handle the blocks that
currently need them, this patch makes gfs2_ail_flush reserve the
maximum number of revokes it can, without increasing the total number
of reserved log blocks. This patch also passes the number of reserved
revokes to __gfs2_ail_flush() so that it doesn't go over its limit
and cause a crash like we're seeing. Non-fsync calls to __gfs2_ail_flush
will still cause a BUG() necessary revokes are skipped.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
dbf2576e37 ("workqueue: make all workqueues non-reentrant") made
WQ_NON_REENTRANT no-op and the flag is going away. Remove its usages.
This patch doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: cluster-devel@redhat.com
PTR_RET should be PTR_ERR
Reported-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We need to choose the protocol family by skb->protocol. Otherwise we
call the wrong xfrm{4,6}_local_error handler in case an ipv6 sockets is
used in ipv4 mode, in which case we should call down to xfrm4_local_error
(ip6 sockets are a superset of ip4 ones).
We are called before before ip_output functions, so skb->protocol is
not reset.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In xfrm6_local_error use inner_header if the packet was encapsulated.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When pushing a new header before current one call skb_reset_inner_headers
to record the position of the inner headers in the various ipv6 tunnel
protocols.
We later need this to correctly identify the addresses needed to send
back an error in the xfrm layer.
This change is safe, because skb->protocol is always checked before
dereferencing data from the inner protocol.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
* tag 'drm-intel-fixes-2013-08-15' of git://people.freedesktop.org/~danvet/drm-intel: (153 commits)
drm/i915: Don't deref pipe->cpu_transcoder in the hangcheck code
This fixes a WARN in i915_gem_free_object when the
obj->pages_pin_count isn't 0.
v2: Add locking to unmap, noticed by Chris Wilson. Note that even
though we call unmap with our own dev->struct_mutex held that won't
result in an immediate deadlock since we never go through the dma_buf
interfaces for our own, reimported buffers. But it's still easy to
blow up and anger lockdep, but that's already the case with our ->map
implementation. Fixing this for real will involve per dma-buf ww mutex
locking by the callers. And lots of fun. So go with the duct-tape
approach for now.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Armin K. <krejzi@email.com> (v1)
Tested-by: Dave Airlie <airlied@redhat.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Just two small fixes for radeon. One fixes an array overrun
that can cause garbage to get written to registers on some r7xx boards,
the other is a small UVD fix.
Also one audio regresion
* 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: fix WREG32_OR macro setting bits in a register
drm/radeon/r7xx: fix copy paste typo in golden register setup
drm/radeon: fix UVD message buffer validation
After any "soft gfx reset" we must manually invalidate the TLBs
associated with each ring. Empirically, it seems that a
suspend/resume or D3-D0 cycle count as a "soft reset". The symptom is
that the hardware would fail to note the new address for its status
page, and so it would continue to write the shadow registers and
breadcrumbs into the old physical address (now used by something
completely different, scary). Whereas the driver would read the new
status page and never see any progress, it would appear that the GPU
hung immediately upon resume.
Based on a patch by naresh kumar kachhi <naresh.kumar.kacchi@intel.com>
Reported-by: Thiago Macieira <thiago@kde.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64725
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Thiago Macieira <thiago@kde.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Return -1 in the error handling case instead of 0, as done elsewhere in
this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Pull cgroup fix from Tejun Heo:
"This contains one patch to fix the return value of cpuset's cgroups
interface function, which used to always return -ENODEV for the writes
on the 'memory_pressure_enabled' file"
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: fix the return value of cpuset_write_u64()
batadv_unicast(_4addr)_prepare_skb might reallocate the skb's data.
And if it tries to do so then this can potentially fail.
We shouldn't continue working on this skb in such a case.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=OroQ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull jbd2 bug fixes from Ted Ts'o:
"Two jbd2 bug fixes, one of which is a regression fix"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: Fix oops in jbd2_journal_file_inode()
jbd2: Fix use after free after error in jbd2_journal_dirty_metadata()
Fix this build error:
In file included from fs/exec.c:61:0:
arch/s390/include/asm/tlb.h:35:23: error: expected identifier or '(' before 'unsigned'
arch/s390/include/asm/tlb.h:36:1: warning: no semicolon at end of struct or union [enabled by default]
arch/s390/include/asm/tlb.h: In function 'tlb_gather_mmu':
arch/s390/include/asm/tlb.h:57:5: error: 'struct mmu_gather' has no member named 'end'
Broken due to commit 2b047252d0 ("Fix TLB gather virtual address range
invalidation corner cases").
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ Oh well. We had build testing for ppc amd um, but no s390 - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I have taken a different job. I am removing myself as maintainer of
GRU. Dimitri will continue to maintain the SGI GRU driver, changing the
XP/XPC/XPNET maintainer to Cliff Whickman, but leaving behind my
personal email address to answer any questions about the design or
operation of the XP family of drivers.
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 0713ed0cde added
jbd2_journal_file_inode() call into ext4_block_zero_page_range().
However that function gets called from truncate path and thus inode
needn't have jinode attached - that happens in ext4_file_open() but
the file needn't be ever open since mount. Calling
jbd2_journal_file_inode() without jinode attached results in the oops.
We fix the problem by attaching jinode to inode also in ext4_truncate()
and ext4_punch_hole() when we are going to zero out partial blocks.
Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Pull ARM fixes from Russell King:
"The usual collection of random fixes. Also some further fixes to the
last set of security fixes, and some more from Will (which you may
already have in a slightly different form)"
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7807/1: kexec: validate CPU hotplug support
ARM: 7812/1: rwlocks: retry trylock operation if strex fails on free lock
ARM: 7811/1: locks: use early clobber in arch_spin_trylock
ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event()
ARM: 7809/1: perf: fix event validation for software group leaders
ARM: Fix FIQ code on VIVT CPUs
ARM: Fix !kuser helpers case
ARM: Fix the world famous typo with is_gate_vma()
Will Deacon