Trivial fix to spelling mistake in dev_err message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Replace rproc_shutdown() by rproc_stop() and rproc_boot() by
rproc_start() in the recovery path, in order to avoid remoteproc
resources re-allocation overhead and to assist with extracting the
coredumps after stopping the remote processor.
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In the context of recovering from crash, rproc_trigger_recovery() does
rproc_shutdown() followed by rproc_boot(). The remoteproc resources are
cleaned up in rproc_shutdown() and immediately reallocated in
rproc_boot() which is an unnecessary overhead. Furthermore, we want the
memory regions to be accessible after stopping the remote processor, to
be able to extract the memory content for a coredump.
This patch factors out the code in rproc_boot() and rproc_shutdown()
path and introduces rproc_{start,stop}() in order to avoid resource
allocation overhead.
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The functions rproc_add_virtio_devices() and rproc_fw_config_virtio()
are reduced to trigger auto-boot only. Modify these function names and
related comments to reflect their current state.
This patch does not add any functional change.
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The rproc_add_virtio_devices() requests firmware asynchronously and
triggers boot if the auto_boot flag is set. However, this
asynchronous call seems to be redundant for non auto-boot scenario
since the rproc_boot() would call request_firmware() anyways. Move
the auto_boot check to rproc_add() so that a redundant call to
_request_firmware can be avoided for non auto-boot case.
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
firmware_loading_complete is used to synchronize operations
on rproc while asynchronous firmware loading is in progress.
However, rproc_boot() no longer waits on
firmware_loading_complete. Hence drop this completion
variable altogether and handle the race between rproc_del()
and rproc_boot() using new state RPROC_DELETED.
The request_firmware_nowait() will hold the reference to
rproc device by using a get_device()/put_device(), so the
rproc struct will remain valid even when we return from
rproc_del() before the asynchronous call to
rproc_fw_config_virtio() completes.
CC: Loic Pallardy <loic.pallardy@st.com>
CC: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The "remoteproc{0,1...}" sysfs entries are added in
rproc_add() and deleted in rproc_type_release() instead of
in rproc_del(). That leaves these lingering entries sticking
around after we return from rproc_del(). Move the
rproc_delete_debug_dir() to rproc_del() to fix this.
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Following any fw_rsc_vdev entries in the resource table are two variable
length arrays, the first one reference vring resources and the second
one is the virtio config space. The virtio config space is used by
virtio to communicate status and configuration changes and must as such
be shared with the remote.
The reverted commit incorrectly made any changes to the virtio config
space only affect the local copy, in an attempt to allowing memory
protection of the shared resource table.
This reverts commit cda8529346.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Commit 2b45cef586 ("remoteproc: Further extend the vdev life cycle")
extends kref support for vdev management.
It introduces a regression when following sequence is executed:
rproc_boot --> rproc_shutdown --> rproc_boot
Second rproc_boot call crashes on register_virtio_device as device
is already existing.
Issue is previous vdev is never released when rproc is stop because
associated refcount is too high.
kref_get introduces is not needed as kref_init already initializes
krefcount to 1 because it considers associated variable as used.
This introduces a misalignment between kref_get and kref_put calls.
Fixes: 2b45cef586 ("remoteproc: Further extend the vdev life cycle")
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In the event that rproc_boot() is called before the firmware loaded
completion has been flagged it will wait with the mutex held,
obstructing the request_firmware_nowait() callback from completing the
wait.
As rproc_fw_config_virtio() has been reduced to only triggering
auto-boot there is no longer a reason for waiting in rproc_boot(), so
drop this.
Cc: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Warning users that remoteproc and it's binary format are under
development doesn't serve much of a purpose. Different drivers support
different image formats and the resource table has a version field that
would need to be bumped when incompatible changes are introduced.
So lets drop this warning to clean up the kernel log.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
As all vdev resources are allocated before we boot the remote processor
we no longer need to support modifying the resource table while the
remote is running.
This saves us from the table_ptr dance, but more importantly allow the
remote processor to enable security lock down of the loaded table memory
region.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The vdev handler is now just another resource allocator, so handle all
resource types in a single pass.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Vrings are now allocated as we parse the resource table, before we
boot the rproc or register any virtio devices, so it's safe to bump
max_notifyid as part of this process.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Represent the virtio device part of the vdev resources as remoteproc
subdevices to finalize the decoupling of the virtio resource and device
handling.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tie the vdev (and hence vring) life cycle to the resource parsing and
resource cleanup operations, allowing us to safely register and
unregister virtio devices on the go.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Instead of having the vrings being allocated and freed as they are
requested by the virtio device tie their life cycle to the vdev
resource. This allows us to decouple the vdev resource management from
the virtio device management.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
A subdevice is an abstract entity that can be used to tie actions to the
booting and shutting down of a remote processor. The subdevice object is
expected to be embedded in concrete implementations, allowing for a
variety of use cases to be implemented.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch adds a sysfs interface to rproc allowing the firmware name
and processor state to be changed dynamically.
State was previously available in debugfs, and is replicated here. The
firmware file allows retrieval of the running firmware name, and a new
one to be specified at run time, so long as the remote processor has
been stopped.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Storage of the firmware name was inconsistent, either storing a pointer
to a name stored with unknown ownership, or a variable length tacked
onto the end of the struct proc allocated in rproc_alloc.
In preparation for allowing the firmware of an already allocated struct
rproc to be changed, instead always keep a locally maintained copy of
the firmware name.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Lock the implementation as we hand out references to client drivers
rather than when they try to boot the remote processor. This allows
auto-booting remote processors to be shut down by unloading their
module, in addition to first unbinding them.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In order to be able to lock a rproc driver implementations only when
used by a client, we must differ between the dereference operation of a
client and the implementation itself.
This patch brings no functional change.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The freeing of resources will attempt to clear values previously set in
the cached resource table, so make sure to free the table after we have
cleaned up the resources.
Fixes: 988d204cda ("remoteproc: Move handling of cached table to boot/shutdown")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
rproc_alloc() will make sure that the "firmware" pointer is either a
driver supplied value or pointing to a generated firmware filename, it
can't be NULL. So drop the extra check in the rproc_boot() path.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In current implementation, struct fw_rsc_vdev_vring which describes
vring resource in firmware resource table owns only device address,
because it assumes that host is responsible of vring allocation and
only device address is needed by coprocessor.
But if vrings need to be fixed in system memory map for any reasons
(security, SoC charactieristics...), physical address is needed exatly
identified the memory chunck by host.
For that let's transform reserved field of struct fw_rsc_vdev_vring
to pa (physical address).
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In the case that we have a resource table, but not a loaded one we
should leave the table_ptr intact, as subsequent resource handling could
otherwise dereference the NULL pointer.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
As we moved the vdev handling to the main boot/shutdown code path we can
further simplify the resource table handling by moving the parsing spet
to boot as well. The lifespan of the resource table is changed to live
from rproc_boot() to rproc_shutdown().
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The newly introduced "always-on" flag allows us to stop giving the vdevs
special treatment. The ordering of resource allocation and life cycle of
the remote processor is kept intact.
This allows us to mark a remote processor with vdevs to not boot unless
explicitly requested to do so by a client driver.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The calculation of max_notifyid must only be done before we call start()
on the remoteproc drivers, so move the calculation to be part of the
loading steps.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Introduce an "auto-boot" flag on rprocs to make it possible to flag
remote processors without vdevs to automatically boot once the firmware
is found.
Preserve previous behavior of the wkup_m3 processor being explicitly
booted by a consumer.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Loic Pallardy <loic.pallardy@st.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
There are couple of debug statements that are printing hexadecimal
numbers without the leading 0x. Fix these and use the standard 0x%x
format specifier so that there is no confusion when looking at the
traces.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch fixes the existing alignment checkpatch check
warnings of the type "Alignment should match open parenthesis"
in the remoteproc core source files.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fix the code formatting to use the kernel preferred style
of using the actual variables to determize the size using
the sizeof() operator.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fix couple of minor mis-spelled words in all the remoteproc
source files.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The dma_addr_t types can be printed properly using the %pad
printk format-specifier, there is no need to resort to the
unsigned long long type-casting to deal with different possible
type sizes.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
These types of error prints are superfluous. The system will
pick up on OOM issues and let the user know.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Trivial patch to clean up a couple of minor misgivings.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Before this patch, the dma_alloc_coherent() failure path printed out:
"dma_alloc_coherent err: 16760832"
... alluding to the Linux error code being 16760832, but seeing as
Linux error codes are all negative, this looks like a signed/unsigned
issue. In fact, the message is trying to print the length of the
requested memory region. Let's clear that up.
While we're at it, let's standardise the way 'len' is printed. In
all other locations 'len' is in hex prefixed by a '0x' for clarity.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
rproc_add adds the newly created remoteproc to a list for use by
rproc_get_by_phandle and then does some additional processing to finish
adding the remoteproc. This leaves a small window of time in which the
rproc is available in the list but not yet fully initialized, so if
another driver comes along and gets a handle to the rproc, it will be
invalid. Rearrange the code in rproc_add to make sure the rproc is added
to the list only after it has been successfuly initialized.
Fixes: fec47d8635 ("remoteproc: introduce rproc_get_by_phandle API")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Qualcomm WCNSS can crash by watchdog or a fatal software error. Add
these types to the list of remoteproc crash reasons.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Remote processors like the ones found in the Qualcomm SoCs does not have
a resource table passed to them, so make it optional by only populating
it if it does exist.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
By default, rproc_fw_boot() needs to wait for rproc to be configured,
but a race may occur when using rpmsg/virtio. In this case, it can
be called locally in a safe manor.
This patch represents two usecases:
- External call (via exported rproc_boot()), which waits
- Internal call can use 'nowait' version of rproc_boot()
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Currently, if the resource table is completely missing in the
firmware, powering up the remoteproc fails silently. Add a message
indicating that the resource table is missing in the firmware.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
The remoteproc core uses a static ida named rproc_dev_index for
assigning an automatic index number to a registered remoteproc.
The ida core may allocate some internal idr cache layers and ida
bitmap upon any ida allocation, and all these layers are truely
freed only upon the ida destruction. The rproc_dev_index ida is
not destroyed at present, leading to a memory leak when using the
remoteproc core as a module and atleast one rproc device is
registered and unregistered.
Fix this by invoking ida_destroy() in the remoteproc core module
exit.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Fix this:
drivers/remoteproc/remoteproc_core.c: In function 'rproc_get_by_phandle':
>> drivers/remoteproc/remoteproc_core.c:1167:2: error: implicit declaration of function 'of_find_node_by_phandle' [-Werror=implicit-function-declaration]
np = of_find_node_by_phandle(phandle);
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
The rproc_da_to_va API is currently used to perform any device to
kernel address translations to meet the different needs of the remoteproc
core/drivers (eg: loading). The functionality is achieved within the
remoteproc core, and is limited only for carveouts allocated within the
core.
A new rproc ops, da_to_va, is added to provide flexibility to platform
implementations to perform the address translation themselves when the
above conditions cannot be met by the implementations. The rproc_da_to_va()
API is extended to invoke this ops if present, and fallback to regular
processing if the platform implementation cannot provide the translation.
This will allow any remoteproc implementations to translate addresses for
dedicated memories like internal memories.
While at this, also update the rproc_da_to_va() documentation since it
is an exported function.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Allow users of remoteproc the ability to get a handle to an rproc by
passing a phandle supplied in the user's device tree node. This is
useful in situations that require manual booting of the rproc.
This patch uses the code removed by commit 40e575b1d0 ("remoteproc:
remove the get_by_name/put API") for the ref counting but is modified
to use a simple list and locking mechanism and has rproc_get_by_name
replaced with an rproc_get_by_phandle API.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
[fix order of Signed-off-by tags]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Fix all the checkpatch warnings in the core remoteproc
code. The fixes cover the following warnings:
1. WARNING: void function return statements are not generally useful
2. WARNING: Possible unnecessary 'out of memory' message
3. WARNING: line over 80 characters
4. WARNING: braces {} are not necessary for single statement blocks
5. WARNING: Unnecessary space before function pointer arguments
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
The remoteproc framework currently relies on iommu_present() on
the bus the device is on, to perform MMU management. However, this
logic doesn't scale for multi-arch, especially for processors that
do not have an IOMMU. Replace this logic instead by using a h/w
capability flag for the presence of IOMMU in the rproc structure.
This issue is seen on OMAP platforms when trying to add a remoteproc
driver for a small Cortex M3 called the WkupM3 used for suspend /
resume management on TI AM335/AM437x SoCs. This processor does not
have an MMU. Same is the case with another processor subsystem
PRU-ICSS on AM335/AM437x. All these are platform devices, and the
current iommu_present check will not scale for the same kernel image
to support OMAP4/OMAP5 and AM335/AM437x.
The existing platform implementation drivers - OMAP remoteproc, STE
Modem remoteproc and DA8xx remoteproc, are updated as well to properly
configure the newly added rproc field.
Cc: Robert Tivy <rtivy@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
[small change in the commit title and in a single comment]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Colin Ian King