Create events with a pid and cpu contraint for inherited events
so that we get a stream per cpu, instead of all cpus contending
on a single stream.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: fweisbec@gmail.com
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091216165904.987643843@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove that ugly usleep and provide proper serialization between
parent and child just like perf-stat does.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: fweisbec@gmail.com
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091216165904.908184135@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In order to allow for per-task-per-cpu counters, useful for
scalability when profiling task hierarchies, we allow installing
events with event->cpu != -1 in task contexts.
__perf_event_sched_in() already skips events where ->cpu
mis-matches the current cpu, fix up __perf_install_in_context()
and __perf_event_enable() to also respect this filter.
This does lead to vary hard to interpret enabled/running times
for such counters, but I don't see a simple solution for that.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: fweisbec@gmail.com
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091216165904.831451147@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the case of direct I/O falling back to buffered I/O we sync data
twice currently: once at the end of generic_file_buffered_write using
filemap_write_and_wait_range and once a little later in
__generic_file_aio_write using do_sync_mapping_range with all flags set.
The wait before write of the do_sync_mapping_range call does not make
any sense, so just keep the filemap_write_and_wait_range call and move
it to the right spot.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
do_sync_mapping_range(..., SYNC_FILE_RANGE_WRITE) is a very awkward way
to perform a filemap_fdatawrite_range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently the locking in blockdev_direct_IO is a mess, we have three different
locking types and very confusing checks for some of them. The most
complicated one is DIO_OWN_LOCKING for reads, which happens to not actually be
used.
This patch gets rid of the DIO_OWN_LOCKING - as mentioned above the read case
is unused anyway, and the write side is almost identical to DIO_NO_LOCKING.
The difference is that DIO_NO_LOCKING always sets the create argument for
the get_blocks callback to zero, but we can easily move that to the actual
get_blocks callbacks. There are four users of the DIO_NO_LOCKING mode:
gfs already ignores the create argument and thus is fine with the new
version, ocfs2 only errors out if create were ever set, and we can remove
this dead code now, the block device code only ever uses create for an
error message if we are fully beyond the device which can never happen,
and last but not least XFS will need the new behavour for writes.
Now we can replace the lock_type variable with a flags one, where no flag
means the DIO_NO_LOCKING behaviour and DIO_LOCKING is kept as the first
flag. Separate out the check for not allowing to fill holes into a separate
flag, although for now both flags always get set at the same time.
Also revamp the documentation of the locking scheme to actually make sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that we cache the ACL pointers in the generic inode all the generic_acl
cruft can go away and generic_acl.c can directly implement xattr handlers
dealing with the full Posix ACL semantics for in-memory filesystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a flags argument to struct xattr_handler and pass it to all xattr
handler methods. This allows using the same methods for multiple
handlers, e.g. for the ACL methods which perform exactly the same action
for the access and default ACLs, just using a different underlying
attribute. With a little more groundwork it'll also allow sharing the
methods for the regular user/trusted/secure handlers in extN, ocfs2 and
jffs2 like it's already done for xfs in this patch.
Also change the inode argument to the handlers to a dentry to allow
using the handlers mechnism for filesystems that require it later,
e.g. cifs.
[with GFS2 bits updated by Steven Whitehouse <swhiteho@redhat.com>]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The EXPORT_SYMBOL for d_alloc_name is in fs/libfs.c but the function
is in fs/dcache.c. Move the EXPORT_SYMBOL to the line immediately
after the closing function brace line in fs/dcache.c as mentioned
in Documentation/CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
procfs-style symlinks return a last_type of LAST_BIND without an actual
path string. This causes __follow_link to skip calling __vfs_follow_link
and so the dentry isn't revalidated.
This is a problem when the link target sits on NFSv4 as it depends on
the VFS to revalidate the dentry before using it on an open call. Ensure
that this occurs by forcing a revalidation of the target dentry of
LAST_BIND symlinks.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Limit the number of imbalance messages to once per filesystem type instead of
once per system boot. (it's actually slightly racy and could give you a
couple per fs, but this isn't a real issue)
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Kill the 'update' argument of ima_path_check(), kill
dead code in ima.
Current rules: ima counters are bumped at the same time
when the file switches from put_filp() fodder to fput()
one. Which happens exactly in two places - alloc_file()
and __dentry_open(). Nothing else needs to do that at
all.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* do ima_get_count() in __dentry_open()
* stop doing that in followups
* move ima_path_check() to right after nameidata_to_filp()
* don't bump counters on it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There are 2 groups of alloc_file() callers:
* ones that are followed by ima_counts_get
* ones giving non-regular files
So let's pull that ima_counts_get() into alloc_file();
it's a no-op in case of non-regular files.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* take truncate logics into a helper (handle_truncate())
* rip it out of may_open()
* call it from the only caller of may_open() that might pass
O_TRUNC
* and do that after we'd finished with opening.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ima_inode_free() has some funky #define just to confuse the crap out of me.
void ima_iint_delete(struct inode *inode)
and then things actually call ima_inode_free() and nothing calls
ima_iint_delete().
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We currently have a lot of duplicated code around ima file counts. Clean
that all up.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
iints are supposed to be allocated when an inode is allocated (during
security_inode_alloc()) But we have code which will attempt to allocate
an iint during measurement calls. If we couldn't allocate the iint and we
cared, we should have died during security_inode_alloc(). Not make the
code more complex and less efficient.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ima_inode_alloc returns 0 and 1, but the LSM hooks expects an errno.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All users outside of fs/ of get_empty_filp() have been removed. This patch
moves the definition from the include/ directory to internal.h so no new
users crop up and removes the EXPORT_SYMBOL. I'd love to see open intents
stop using it too, but that's a problem for another day and a smarter
developer!
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use the sucker in other places in pathname resolution
that check MAY_EXEC for directories; lose the _lite
from name, it's equivalent of full-blown inode_permission()
for its callers (albeit still lighter, since large parts
of generic_permission() do not apply for pure MAY_EXEC).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* don't reinvent the wheels, please - open_bdev_exclusive() is there
for purpose
* both open_by_devnum() and open_bdev_exclusive() return ERR_PTR(...)
upon error, not NULL
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* if we fail in p9_conn_create(), we shouldn't leak references to struct file.
Logics in ->close() doesn't help - ->trans is already gone by the time it's
called.
* sock_create_kern() can fail.
* use of sock_map_fd() is all fscked up; I'd fixed most of that, but the
rest will have to wait for a bit more work in net/socket.c (we still are
violating the basic rule of working with descriptor table: "once the reference
is installed there, don't rely on finding it there again").
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* hpux_pipe() - no need to take BKL
* sys32_pipe() in arch/x86/ia32 and xtensa_pipe() in arch/xtensa -
no need at all, since both functions are open-coded sys_pipe()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch adds support for the ACPI events generated by the RFKill
switch on modern Toshiba laptops, and re-enables the Bluetooth USB
device when the switch is flipped back to the 'on' position.
The RFKill switch brute force pulls out the USB device when flipped to
'off', but it doesn't automatically re-enable it. Without this driver,
the Bluetooth is gone until after a reboot on my Portege R500.
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Although reporting of benign GART TLB errors is disabled in
__mcheck_cpu_apply_quirks, those are still being logged, and, as a
result, trip up amd64_edac. Pull up reporting check so that machines
with loaded edac module bail out early and don't spit fragments into
dmesg.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
That means that almost everything you can do with 'perf report'
can be done with 'perf diff', for instance:
$ perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2699
samples) ] $ perf record -f find / > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data (~2687
samples) ] perf diff | head -8
9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal
2.91% -1.00% find [kernel] [k] __kmalloc
2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent
1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock
2.44% find [kernel] [k] half_md4_transform
$
So if you want to zoom into libc:
$ perf diff --dsos libc-2.10.1.so | head -8
37.34% find [.] _IO_vfprintf_internal
10.34% find [.] __GI_memmove
8.25% +2.00% find [.] _int_malloc
5.07% -1.00% find [.] __GI_mempcpy
7.62% +2.00% find [.] _int_free
$
And if there were multiple commands using libc, it is also
possible to aggregate them all by using --sort symbol:
$ perf diff --dsos libc-2.10.1.so --sort symbol | head -8
37.34% [.] _IO_vfprintf_internal
10.34% [.] __GI_memmove
8.25% +2.00% [.] _int_malloc
5.07% -1.00% [.] __GI_mempcpy
7.62% +2.00% [.] _int_free
$
The displacement column now is off by default, to use it:
perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8
37.34% [.] _IO_vfprintf_internal
10.34% [.] __GI_memmove
8.25% +2.00% [.] _int_malloc
5.07% -1.00% +2 [.] __GI_mempcpy
7.62% +2.00% -1 [.] _int_free
$
Using -t/--field-separator can be used for scripting:
$ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8
37.34, , ,[.] _IO_vfprintf_internal
10.34, , ,[.] __GI_memmove
8.25,+2.00%, ,[.] _int_malloc
5.07,-1.00%, +2,[.] __GI_mempcpy
7.62,+2.00%, -1,[.] _int_free
6.99,+1.00%, -1,[.] _IO_new_file_xsputn
1.89,-2.00%, +4,[.] __readdir64
$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Those don't make sense for tools such as 'perf diff'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260973631-28035-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Will be used in other tools such as 'perf diff'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260973631-28035-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra