These primitives are long deprecated and unused.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
They are not used anywhere, so safe to drop.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SEEK_DATA and SEEK_HOLE are always defined in the kernel,
drop the definition checks
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Card configuration is stored in SPI EEPROM (93c46 or 93c56)
working in 128|256x16 mode.
Communication is handled using GPIO bitbang.
>From behaviour perspective, delay after read was removed.
It is not needed as we wait after reading GPIO mapped to
PCI-E register - it should have no side effects.
According to sample EEPROM datasheet (AT93Cx6), max frequency for
worst case scenario (1.8V supply) is 250kHZ (vs. 1MHz for 5V).
Driver generates ~50kHZ clock - margin should be big enough
even for devices from other vendors.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to unisys, the s_par hypervisor has a bug in which it never
triggers an interrupt. That makes the visornic effectively a 2ms poll
loop. In order to just have the rx thread shceduling a napi poll every
2ms, lets instead give it the chance to check the response queue for
data before we schedule. This helper provides that functionality
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.
Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.
Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pass platform_data as an argument to fbtft_framebuffer_alloc()
instead of using dev->platform_data.
This fixes an issue where the device comes from Device Tree
and fbtft_probe_common() sets dev->platform_data to allocated
memory. When the module is reloaded, dev->platform_data points
to freed memory.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix build of hdm-dim2. Since it calls a function that is provided
by AIM_NETWORK, make it depend on that symbol.
Also fix a misspelling in the Kconfig file.
drivers/built-in.o: In function `deliver_netinfo_thread':
dim2_hdm.c:(.text+0x3a9563): undefined reference to `most_deliver_netinfo'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jain Roy Ambi <JainRoy.Ambi@microchip.com>
Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix build errors: driver uses snd_pcm*() interfaces, so select
SND_PCM.
drivers/built-in.o: In function `audio_rx_completion':
sound.c:(.text+0x3cd376): undefined reference to `snd_pcm_period_elapsed'
drivers/built-in.o: In function `pcm_prepare':
sound.c:(.text+0x3cd3b0): undefined reference to `snd_pcm_format_physical_width'
sound.c:(.text+0x3cd3ce): undefined reference to `snd_pcm_format_big_endian'
sound.c:(.text+0x3cd42c): undefined reference to `snd_pcm_format_big_endian'
drivers/built-in.o: In function `pcm_hw_free':
sound.c:(.text+0x3cd50a): undefined reference to `snd_pcm_lib_free_vmalloc_buffer'
drivers/built-in.o: In function `pcm_hw_params':
sound.c:(.text+0x3cd54c): undefined reference to `_snd_pcm_lib_alloc_vmalloc_buffer'
drivers/built-in.o: In function `playback_thread':
sound.c:(.text+0x3cd6a0): undefined reference to `snd_pcm_period_elapsed'
drivers/built-in.o: In function `audio_probe_channel':
sound.c:(.text+0x3cdc0b): undefined reference to `snd_pcm_new'
sound.c:(.text+0x3cdc2b): undefined reference to `snd_pcm_set_ops'
drivers/built-in.o:(.data+0x952d0): undefined reference to `snd_pcm_lib_ioctl'
drivers/built-in.o:(.data+0x95318): undefined reference to `snd_pcm_lib_get_vmalloc_page'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch prevents a potential integer overlow.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull i2c fixes from Wolfram Sang:
"A refcounting bugfix for the i2c-core, bugfixes for the generic bus
recovery algorithm and for its omap-user, making binary file
attributes for EEPROMs behave POSIX compliant, and a small typo fix
while we are here"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: fix leaked device refcount on of_find_i2c_* error path
i2c: Fix typo in i2c-bfin-twi.c
i2c: omap: fix bus recovery setup
i2c: core: only use set_scl for bus recovery after calling prepare_recovery
misc: eeprom: at24: clean up at24_bin_write()
i2c: slave eeprom: clean up sysfs bin attribute read()/write()
We need to check that a TRB is part of the current segment
before calculating its DMA address.
Previously a ring segment didn't use a full memory page, and every
new ring segment got a new memory page, so the off by one
error in checking the upper bound was never seen.
Now that we use a full memory page, 256 TRBs (4096 bytes), the off by one
didn't catch the case when a TRB was the first element of the next segment.
This is triggered if the virtual memory pages for a ring segment are
next to each in increasing order where the ring buffer wraps around and
causes errors like:
[ 106.398223] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 0 comp_code 1
[ 106.398230] xhci_hcd 0000:00:14.0: Looking for event-dma fffd3000 trb-start fffd4fd0 trb-end fffd5000 seg-start fffd4000 seg-end fffd4ff0
The trb-end address is one outside the end-seg address.
Cc: <stable@vger.kernel.org>
Tested-by: Arkadiusz Miśkiewicz <arekm@maven.pl>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just one major fix which has been pending since January.
Somehow it fell through the cracks, but here it is. Basically,
this fixes a bug in udc-core when gadget registration fails.
Signed-off-by: Felipe Balbi <balbi@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVv4FwAAoJEIaOsuA1yqREo+4P/1DHyjSWdDTigfFh1Cbmd2Gv
yX3FDJjgA7LA6AbFrkDpx8RnlZrLVRqqMssK5ZI9uVyQ/MlCsn+H6esu5gRnqxQg
VqR6GzNQTprbHUHqvOEEO+d186Mm/brw7qOT4X3Eg/DJJeLY9gr9HmSPPxkExVEy
1GcgFv2rABRG4XmNTWSqTXLqIoLQOoyqsNSgo9U7TlvPHYfmdBMO4zU6Ny1Y7dld
bKzZDckiZ/rLhBncGe6GMjQ26Zm04ABPJ5HbUlCD/IWCiqnGES6OovvubkgaXXX2
FQQsP7ZThyv3z5Lfd/IPBXm3zML8xQAJzneNpnD7KD8xhhikLXE+gmpe7ZRMqeg7
/vWjU5RAunCRheW9Gx3wYoqsnE+jbNckoz91tc4tLW0ZP82ibE76IcYZseYg0bZC
H0Weq+HGQ+7JvqOygjClYh5+Xa6FUQ5Si2AXZ9lFLZYtB3ol6kQh8END/tODmJsm
vZ/yZMSeeqykW8WIjvYMf5RuVyMV7SxDxis3+IjvtdZA5OPemAzFhb6AiJrCqhP1
kSmIYd4XNRElde8msEdr97cqgrPNh+wAQQljSudYTR9xw4idurtWC8AFtoTCVI7n
L02kt3I2Ro7APMOBui3QvnIowjPJhqoQxvwRP7FZ9Pzr/0mNIaAI2c28uOjLTPMX
lJxbcjE6U+Z+4Zb3K4HM
=YNrs
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v4.2-rc6
Just one major fix which has been pending since January.
Somehow it fell through the cracks, but here it is. Basically,
this fixes a bug in udc-core when gadget registration fails.
Signed-off-by: Felipe Balbi <balbi@ti.com>
It turns out that only Dell laptops have the separate button bits for
v2 dualpoint sticks and that commit 92bac83dd7 ("Input: alps - non
interleaved V2 dualpoint has separate stick button bits") causes
regressions on Toshiba laptops.
This commit adds a check for Dell laptops to the code for handling these
extra button bits, fixing this regression.
This patch has been tested on a Dell Latitude D620 to make sure that it
does not reintroduce the original problem.
Reported-and-tested-by: Douglas Christman <douglaschristman@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a proper module alias so the driver can be autoloaded when the
parent axp20x mfd driver registers its cells.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Patch 17dd3f0f7aa7: "[PATCH] drivers/input/joystick: convert to dynamic
input_dev allocation" from Sep 15, 2005, leads to the following static
checker warning:
drivers/input/joystick/turbografx.c:235 tgfx_probe()
error: buffer overflow 'tgfx_buttons' 5 <= 5
drivers/input/joystick/turbografx.c
195 for (i = 0; i < n_devs; i++) {
196 if (n_buttons[i] < 1)
197 continue;
198
199 if (n_buttons[i] > 6) {
^^^^^^^^^^^^^^^^
Possibly off by one. >= 6.
Let's change the upper value to ARRAY_SIZE(tgfx_buttons) to ensure we do
not reach past the end of the array.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull Ceph fixes from Sage Weil:
"There are two critical regression fixes for CephFS from Zheng, and an
RBD completion fix for layered images from Ilya"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: fix copyup completion race
ceph: always re-send cap flushes when MDS recovers
ceph: fix ceph_encode_locks_to_buffer()
Pull security layer fix from James Morris:
"Yama initialization fix"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
Adding YAMA hooks also when YAMA is not stacked.
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- a bogus BUG_ON in ixp4xx that can be triggered by a dst buffer that
is an SG list.
- the error handling in hwrngd may cause a crash in case of an error.
- fix a race condition in qat registration when multiple devices are
present"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: core - correct error check of kthread_run call
crypto: ixp4xx - Remove bogus BUG_ON on scattered dst buffer
crypto: qat - Fix invalid synchronization between register/unregister sym algs
I2S2_DAC pin can be used for I2S or GPIO. We should set it as GPIO
if we use GPIO5 as DMIC1 data pin.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Without this patch YAMA will not work at all if it is chosen
as the primary LSM instead of being "stacked".
Signed-off-by: Salvatore Mesoraca <s.mesoraca16@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
platform_driver does not need to set an owner because
platform_driver_register() will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This patch fixes a bug in the error pathway of
usb_add_gadget_udc_release() in udc-core.c. If the udc registration
fails, the gadget registration is not fully undone; there's a
put_device(&gadget->dev) call but no device_del().
CC: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
With HS 2.1 release, the peripheral space register no longer contains
the uncached space specifics, causing the kernel to panic early on.
So read the newer NON VOLATILE AUX register to get that info.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
When EVA is enabled, flush the Return Prediction Stack (RPS) present on
some MIPS cores on entry to the kernel from user mode.
This is important specifically for interAptiv with EVA enabled,
otherwise kernel mode RPS mispredicts may trigger speculative fetches of
user return addresses, which may be sensitive in the kernel address
space due to EVA's overlapping user/kernel address spaces.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15.x-
Patchwork: https://patchwork.linux-mips.org/patch/10812/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This reverts commit 3cf2954341 ("MIPS:
BCM63xx: Provide a plat_post_dma_flush hook") since this commit was
found to prevent BCM6358 (early BMIPS4350 cores) and some BCM6368
(BMIPS4380 cores) from booting reliably.
Alvaro was able to track this down to an issue specifically located to
devices that use the second thread (TP1) when booting. Since BCM63xx did
not have a need for plat_post_dma_flush() hook before, let's just keep
things the way they were.
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reported-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: stable@vger.kernel.org
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: noltari@gmail.com
Cc: jogo@openwrt.org
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10804/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This fixes the following warning, that is seen with gcc 5.1:
warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses].
Signed-off-by: Tomer Barletz <barletz@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This was left over from an earlier iteration of the BMIPS irqchip changes.
It doesn't actually have an effect, so let's nuke it.
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: stable@vger.kernel.org # v4.1+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9910/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The show_stack() function deals exclusively with kernel contexts, but if
it gets called in user context with EVA enabled, show_stacktrace() will
attempt to access the stack using EVA accesses, which will either read
other user mapped data, or more likely cause an exception which will be
handled by __get_user().
This is easily reproduced using SysRq t to show all task states, which
results in the following stack dump output:
Stack : (Bad stack address)
Fix by setting the current user access mode to kernel around the call to
show_stacktrace(). This causes __get_user() to use normal loads to read
the kernel stack.
Now we get the correct output, like this:
Stack : 00000000 80168960 00000000 004a0000 00000000 00000000 8060016c 1f3abd0c
1f172cd8 8056f09c 7ff1e450 8014fc3c 00000001 806dd0b0 0000001d 00000002
1f17c6a0 1f17c804 1f17c6a0 8066f6e0 00000000 0000000a 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 0110e800 1f3abd6c 1f17c6a0
...
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/10778/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If a machine check exception is raised in kernel mode, user context,
with EVA enabled, then the do_mcheck handler will attempt to read the
code around the EPC using EVA load instructions, i.e. as if the reads
were from user mode. This will either read random user data if the
process has anything mapped at the same address, or it will cause an
exception which is handled by __get_user, resulting in this output:
Code: (Bad address in epc)
Fix by setting the current user access mode to kernel if the saved
register context indicates the exception was taken in kernel mode. This
causes __get_user to use normal loads to read the kernel code.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/10777/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The majority of SMP platforms handle their IPIs through do_IRQ()
which calls irq_{enter/exit}(). When a call function IPI is received,
smp_call_function_interrupt() is called which also calls
irq_{enter,exit}(), meaning irq_count is raised twice.
When tick broadcasting is used (which is implemented via a call
function IPI), this incorrectly causes all CPU idle time on the core
receiving broadcast ticks to be accounted as time spent servicing
IRQs, as account_process_tick() will account as such if irq_count is
greater than 1. This results in 100% CPU usage being reported on a
core which receives its ticks via broadcast.
This patch removes the SMP smp_call_function_interrupt() wrapper which
calls irq_{enter,exit}(). Platforms which handle their IPIs through
do_IRQ() now call generic_smp_call_function_interrupt() directly to
avoid incrementing irq_count a second time. Platforms which don't
(loongson, sgi-ip27, sibyte) call generic_smp_call_function_interrupt()
wrapped in irq_{enter,exit}().
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10770/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Execution of break instruction, trap instructions, emulation of unaligned
loads or floating point instructions - anything that tries to read the
instruction's opcode from userspace - needs read access to a page.
RIXI (Read Inhibit / Execute Inhibit) support however allows the creation of
pags that are executable but not readable. On such a mapping the attempted
load of the opcode by the kernel is going to cause an endless loop of
page faults.
The quick workaround for this is to disable the combinations that the kernel
currently isn't able to handle which are executable mappings.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
On Malta, since commit a87ea88d8f ("MIPS: Malta: initialise the RTC at
boot"), the RTC is reinitialised and forced into binary coded decimal
(BCD) mode during init, even if the bootloader has already initialised
it, and may even have already put it into binary mode (as YAMON does).
This corrupts the current time, can result in the RTC seconds being an
invalid BCD (e.g. 0x1a..0x1f) for up to 6 seconds, as well as confusing
YAMON for a while after reset, enough for it to report timeouts when
attempting to load from TFTP (it actually uses the RTC in that code).
Therefore only initialise the RTC to the extent that is necessary so
that Linux avoids interfering with the bootloader setup, while also
allowing it to estimate the CPU frequency without hanging, without a
bootloader necessarily having done anything with the RTC (for example
when the kernel is loaded via EJTAG).
The divider control is configured for a 32KHZ reference clock if
necessary, and the SET bit of the RTC_CONTROL register is cleared if
necessary without changing any other bits (this bit will be set when
coming out of reset if the battery has been disconnected).
Fixes: a87ea88d8f ("MIPS: Malta: initialise the RTC at boot")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.14+
Patchwork: https://patchwork.linux-mips.org/patch/10739/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit eeb5389503 ("MIPS: unaligned: Prevent EVA instructions on kernel
unaligned accesses") renamed the Load* and Store* defines in unaligned.c
to _Load* and _Store* as part of its fix. One define was missed out which
causes big endian R6 kernels to fail to build.
arch/mips/kernel/unaligned.c:880:35:
error: implicit declaration of function '_StoreDW'
#define StoreDW(addr, value, res) _StoreDW(addr, value, res)
^
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
Fixes: eeb5389503 ("MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses")
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10575/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
p->thread.user_cpus_allowed is zero-initialized and is only filled on
the first sched_setaffinity call.
To avoid adding overhead in the task initialization codepath, simply OR
the returned mask in sched_getaffinity with p->cpus_allowed.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10740/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 01306aeadd ("MIPS: prepare for user enabling of CONFIG_OF")
changed the guards in asm/prom.h from CONFIG_OF to CONFIG_USE_OF, but
missed the actual function declarations in kernel/prom.c, which have
additional dependencies.
Fixes the following build error:
CC arch/mips/kernel/prom.o
arch/mips/kernel/prom.c: In function '__dt_setup_arch':
arch/mips/kernel/prom.c:54:2: error: implicit declaration of function 'early_init_dt_scan' [-Werror=implicit-function-declaration]
if (!early_init_dt_scan(bph))
^
Fixes: 01306aeadd ("MIPS: prepare for user enabling of CONFIG_OF")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Rob Herring <robh@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: Grant Likely <grant.likely@linaro.org>
Patchwork: https://patchwork.linux-mips.org/patch/10741/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
71eeedcf51 (MIPS: Lemote 2F: Fix build caused
by recent mass rename.) only fixed one instance of this issue in arch/mips
but missed a 2nd one in drivers/cpufreq/loongson2_cpufreq.c.
[ralf@linux-mips.org: dropped the one segment for the already fixed
instance and changed the other avoiding an include <path.h> without a /
because that's generally is a bad idea.]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Patchwork: https://patchwork.linux-mips.org/patch/10659/
I have a report of drop_one_stripe() called from
raid5_cache_scan() apparently finding ->max_nr_stripes == 0.
This should not be allowed.
So add a test to keep max_nr_stripes above min_nr_stripes.
Also use a 'mask' rather than a 'mod' in drop_one_stripe
to ensure 'hash' is valid even if max_nr_stripes does reach zero.
Fixes: edbe83ab4c ("md/raid5: allow the stripe_cache to grow and shrink.")
Cc: stable@vger.kernel.org (4.1 - please release with 2d5b569b66)
Reported-by: Tomas Papan <tomas.papan@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.com>
In drivers/md/md.c get_bitmap_file() uses kmalloc() for creating a
mdu_bitmap_file_t called "file".
5769 file = kmalloc(sizeof(*file), GFP_NOIO);
5770 if (!file)
5771 return -ENOMEM;
This structure is copied to user space at the end of the function.
5786 if (err == 0 &&
5787 copy_to_user(arg, file, sizeof(*file)))
5788 err = -EFAULT
But if bitmap is disabled only the first byte of "file" is initialized
with zero, so it's possible to read some bytes (up to 4095) of kernel
space memory from user space. This is an information leak.
5775 /* bitmap disabled, zero the first byte and copy out */
5776 if (!mddev->bitmap_info.file)
5777 file->pathname[0] = '\0';
Signed-off-by: Benjamin Randazzo <benjamin@randazzo.fr>
Signed-off-by: NeilBrown <neilb@suse.com>
Oleg Drokin