Another round of again fairly unexciting fixes - several driver fixes,
an e-mail address change and a fix for error handling with DPCM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUEDV+AAoJECTWi3JdVIfQ/6MH/j45SuIb63+Uaesb9tN3P/rt
4wBW1FNW5g6AJPDiAnbD3Z+/B/nbM7WKQZS2UhCB63h5PI1wxvebnmmfxaIyx1cP
+/G2kGQKPIWjb5NPWFzzgSci/sv1FffiRlIXtqCnopPGrcnQwPMKFJHh4C43Oa9b
3nAmJk96u7ABxVh2b6oJvdX/i7eAvkB5lITOIAe5bQVTSgV7iXOdAb+a1qlqAX5G
81fWbopnCa/kzFWZv9H1PNJdu5piOFfXRB6PsepRWSLkcJKGLuhc3eY5fmClsE74
0f5NoK+KTLxcaCsZV1tH8J8IscyNz0QgxJmIiNVXFJ19kzFwFzk3vAtN3Pdn/tU=
=GZdJ
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.17-rc4' into asoc-linus
ASoC: Fixes for v3.17
Another round of again fairly unexciting fixes - several driver fixes,
an e-mail address change and a fix for error handling with DPCM.
# gpg: Signature made Wed 10 Sep 2014 12:26:54 BST using RSA key ID 5D5487D0
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg: aka "Mark Brown <broonie@debian.org>"
# gpg: aka "Mark Brown <broonie@kernel.org>"
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg: aka "Mark Brown <broonie@linaro.org>"
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
This patch remove unnecessary KERN_ERR in pr_err().
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current caching implementation during regcache_sync() call bypasses
all register writes of values that are already known as default
(regmap reg_defaults). Same time in TLV320AIC3x codecs register 5
(AIC3X_PLL_PROGC_REG) write should be immediately followed by register
6 write (AIC3X_PLL_PROGD_REG) even if it was not changed. Otherwise
both registers will not be written.
This brings to issue that appears particulary in case of 44.1kHz
playback with 19.2MHz master clock. In this case AIC3X_PLL_PROGC_REG
is 0x6e while AIC3X_PLL_PROGD_REG is 0x0 (same as register
default). Thus AIC3X_PLL_PROGC_REG also remains not written and we get
wrong playback speed.
In this patch snd_soc_read() is used to get cached pll values and
snd_soc_write() (unlike regcache_sync() this function doesn't bypasses
hardware default values) to write them to registers.
Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Commit 0bd2ac3dae ("ASoC: Remove CODEC pointer from snd_soc_dapm_context")
introduced regression to snd_soc_dapm_new_controls() when registering a card
with card->dapm_widgets set. Call chain is:
snd_soc_register_card()
-> snd_soc_instantiate_card()
-> snd_soc_dapm_new_controls()
-> snd_soc_dapm_new_control()
Null pointer dereference occurs since card->dapm context doesn't have
associated component. Fix this by setting widget codec pointer
conditionally.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an optional mic detect gpio property. If specified in device tree
there will be a mic jack created for the given gpio. This will be
used by the Tegra-based Chromebooks.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the sgtl5000 datasheet the valid range for SYS_MCLK is from 8 to
27 MHz.
Add a sanity check prior to enabling SYS_MCLK.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For sgtl5000 to operate in slave mode it can only work in "Synchronous
SYS_MCLK input" mode.
In this mode only the following rates can be supported: 256*Fs, 384*Fs, 512*Fs.
Improve the error message to give a better indication as to why the clocking
failed for slave mode:
[ 12.515399] sgtl5000 1-000a: PLL not supported in slave mode
[ 12.524124] sgtl5000 1-000a: 233 ratio is not supported. SYS_MCLK needs to be 256, 384 or 512 * fs
[ 12.535938] sgtl5000 1-000a: ASoC: can't set sgtl5000 hw params: -22
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rt286 use I2C as its I/O. So the driver can only available when
I2C is selected.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSP driver needs to know widget control value in its event handler for
widgets like mixers. This is required in the subsequent patches
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow Headphone and Microphone jack detect gpios to be specified in
device tree. This will allow a few systems including rk3288_max98090
to use simple-card instead of having their own board file.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt286_index_sync() function is only called in the resume path. If PM
is disabled it becomes unused and shouldn't be built either.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The tas2552_sw_shutdown() function is only used by runtime suspend
support, so only build it when necessary.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Although it's not known does current version of byt-rt5640 cover all
possible variants it is better to set the fully_routed flag on in order to
disable unused codecs pins in known machines and get regression from
machines that use different routing than the default one.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It was found with help of Jan-Michael Brummer <jan.brummer@tabos.org> that
Dell Venue 8 Pro tablet has a digital microphone connected to DMIC2
interface of the RT564x.
This patch adds a DAPM route to DMIC2 and a quirk using it for that tablet.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reported-by: Jan-Michael Brummer <jan.brummer@tabos.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The wm8962 driver uses the input subsystem, but it is selected by
SND_SOC_FSL_ASOC_CARD, which can be built with CONFIG_INPUT disabled,
resulting in this link error:
ERROR: "input_event" [sound/soc/codecs/snd-soc-wm8962.ko] undefined!
ERROR: "input_register_device" [sound/soc/codecs/snd-soc-wm8962.ko] undefined!
ERROR: "devm_input_allocate_device" [sound/soc/codecs/snd-soc-wm8962.ko] undefined!
Do not force the selection of the codecs by SND_SOC_FSL_ASOC_CARD to avoid
such problem.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It turned out DMIC interface wasn't enabled/disabled runtime for active
DMIC route in the rt5640 codec driver anymore after commit
71d97a7943 ("ASoC: rt5640: Use the platform data for DMIC settings").
Since DMIC interface must be enabled explicitly either by passing platform
data to rt5640 codec driver or by calling new rt5640_dmic_enable() this
patch adds a DMI quirk flag that is used to conditionally enable DMIC
interface during sound card init time.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no code enabling DMIC clock in systems that don't provide platform
data for rt5640 after commit 71d97a7943 ("ASoC: rt5640: Use the platform
data for DMIC settings").
I think it's worth to keep this static DMIC clock and alternative data pin
setting during probe time. For making possible to use DMIC from ACPI probed
machine (prior ACPI 5.1 with _DSD) this patch moves DMIC configuration to
new exported rt5640_dmic_enable() that machine drivers can call.
Please note, this patch moves DMIC configuration from i2c probe to codec
probe in case platform data for rt5640 is set.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If the board is sent to suspend (deep sleep) the McASP context will be lost.
In case when suspend happens during active audio we need to save and restore
more registers, which was configured during hw_param times as well.
We need to add more config registers, AFIFO control registers and we also
need to save and restore the serializer configuration as well.
Since the number of serializers depends on the SoC we need to allocate the
memory for it based on the num_serializer for the given McASP instance.
With this patch the ongoing stream will resume after resuming from deep
sleep.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of individual values use an array to store the registers need to be
saved on suspend and restored on resume.
It is going to be easier to add more registers to save and restore.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Another fix for v3.17, fixing device identification after the split out
of the I2C and SPI code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUKqQ0AAoJECTWi3JdVIfQcbcH/1khKNhibCQvL0UB4o5p2Elh
tffm/bQexEaCWr589X/6V8QCeSL1cm92yTs6FSfsDOny6TXTgMxmYrXeBfGb/L2a
63IYWWxhdvPO/VtMPgqRnBtFnpr6jU3OJ8hmNRyZ6CR9kv0L0CJzPDIZgsZu5sjy
wqmi6/zYEWznIjjSFQJjJ0xniHaRiTb6z6y6qtOqVY/btV0Lm5HVmsSiJ6Ktddq+
jNMZLdAPQUnxLM/gtWbwhazAp6et9CwPWs3Y+jAFfkTc3R30xsC0N1CUq2OV+ngI
0Wpzou/FOa5o8rWyGS5ORk1aaCDehZOXFSl6YkmbSPCCpDkaxbB4TjB7xPWXRh0=
=yz7T
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fix SSM2602 device identification
Another fix for v3.17, fixing device identification after the split out
of the I2C and SPI code.
There is no need to use 'i2s-slave' property, since master/slave configuration
are passed via machine layer.
This change does not break existing users because they do check for slave
mode inside sound/soc/fsl/mpc8610_hpcd.c/p1022_ds.c/p1022_rdk.c
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds the necessary values to the constraint list and
register values to the coefficient table in order to
configure the device for 11.025kHz and 22.5kHz sample rates.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Allow the ssm2602/ssm2603/ssm2604 codec driver to be
instantiated from the device tree.
Also, add Kconfig prompts to allow manual selection of both the
I2C and SPI configuration versions of the driver.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
The correct type (SSM2602/SSM2603/SSM2604) is passed down
from the ssm2602_spi_probe()/ssm2602_spi_probe() functions,
so use that instead of hardcoding it to SSM2602 in
ssm2602_probe().
Fixes: c924dc68f7 ("ASoC: ssm2602: Split SPI and I2C code into different modules")
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: stable@vger.kernel.org
pr_* macros replaced with dev_* as they are more preffered over pr_*.
each file which had pr_* was reviewed manually and replaced with dev_*.
here we have actually used the various snd_card which was added to some
structures of ctxfi via a previous patch of this series.
in the ctvmem.c file we have passed a reference of ct_atc as an
argument to get_vm_block function so that it can be used from
dev_*.
since dev_* will print the device information , so the prefix of
"ctxfi" from the various pr_* were also removed.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
added reference of the card in the convert_format function
so that we can know which card has called the function.
this reference of the snd_card will actually be used in a later patch
to convert the pr_* macro to dev_*.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
initialized the reference of snd_card which was added to the various
structures through the previous patch of the series.
these references of snd_card will be used in a later patch to convert
the pr_* macros to dev_*
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
added a pointer of snd_card in some of the structures to get a
reference of the card from other functions.
these references of snd_card will be initialised in the next patch
of this series and as of now these snd_card will be used to print the
the device information when we convert the pr_* macros to dev_* in a
later patch of this series.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
the previous patch of the series has converted the void * to
struct hw * . Now this patch removes the typecasting to (struct hw *)
which is not needed any more.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
in the code we have void *hw and while using we are always typecasting
it to (struct hw *). it is better to use void type of pointer when we
store different types of pointer , but in this code we are only having
struct hw.
So changed all the relevant reference of void *hw to struct hw *hw,
without any modification of the existing code logic.
the next patch of the series will remove the typecasting which is
not required now.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few small driver specific fixes and a couple of error handling fixes
in the core.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUJ/BeAAoJECTWi3JdVIfQogIH/1H69hPq96R/0s74I4w1JDcZ
hnzQ5OPqi3vhPByJUAS6hNGe8TSwLD37maCqydOeqy50dI/NpoNVSVVK8+8VKhdl
mlkpDFJ1r1IWOYSaGKAH4Ggo6sI5+PEmr4x5MyZPBqxi74Kc/173do6q0yQuLQxs
wlaADJnQthBz11nViczzF6RA88cQ2JzjkL+aW1iBmw1yok494I2juc0GQ0NmxsQZ
1Qc2kkAVcGCvXCdI8wQfVHkeIJwT0vSjnofVcXi4/egsQKqU0VaH2yFpC+Pw1vqe
G49B6SIWEaSO+mtH1V4H57wLPdyajbRLNQ5RJvcDiXOcIEd/AfrcIS7DfMB9wp8=
=KoXl
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v3.17
A few small driver specific fixes and a couple of error handling fixes
in the core.
Asus T100 internal microphone is not digital but analogue connected to IN1P
pin of the RT564x codec with shared bias between internal and headset
microphones. Because of this there is need to have machine specific DAPM
routes in byt-rt5640.
Add handling for them with the help of DMI quirk that is used to add custom
routes in addition to common. Because "Internal Mic" connected to DMIC1 is
not common to all move it as a default custom route when there is no match
in quirk table.
Custom "Internal Mic" -> "IN1P" with MICBIAS1 route is added for Asus T100.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
I tested couple byt-rt5640 based platforms and they have single-ended
headset microphone connection to IN2P only. I guess IN2N was either defined
by accident or some early platform had floating ground for headset. It's
better to remove IN2N and add a custom route for such a platform if needed.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The only remaining user of the CODEC pointer in the DAPM struct is to
initialize the CODEC pointer in the widget struct. The later is scheduled
for removal, but has still a few users left. For now use
dapm->component->codec to initialize it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The CODEC struct in the snd_soc_dapm_context struct is deprecated and
scheduled for removal. Use the snd_soc_dapm_to_codec() function instead.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The CODEC struct in the snd_soc_dapm_context struct is deprecated and
scheduled for removal. Use the snd_soc_dapm_to_codec() function instead.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It is possible to configure a kernel with SND_DAVINCI_SOC=m and
SND_DM365_VOICE_CODEC=y, which results in a link error:
sound/built-in.o: In function `davinci_vcif_probe':
sound/soc/davinci/davinci-vcif.c:223: undefined reference to `davinci_soc_platform_register'
The best way to avoid this is to make SND_DM365_VOICE_CODEC
a tristate option that depends on SND_DAVINCI_SOC, so it
can only be a module or disabled when the base driver is
a loadable module
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
All byt-max98090 audio connections are known and described in DAPM routing
table. Set the fully_routed flag in order to disable unused codec pins.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
According to MAX98090 specification "Digital microphone clock (DMC) is
enabled once both data channels are enabled.". Therefore both digital
microphone data channels must be enabled also when using mono microphone
configuration.
Fix this by moving "DMICL_ENA" and "DMICR_ENA" supply widgets from "DMICL"
and "DMICR" inputs to "DMIC Mux" in order to enable both data channels
whenever there is active mono or stereo digital microphone input path.
Use of "DMICL" and "DMICR" inputs are retained for informative source and in
case the driver would find use for exact digital microphone configuration in
the future.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since we cannot make sure the 'params->num_regs' will always be none
zero here, and then if it equals to zero, the kmemdup() will return
ZERO_SIZE_PTR, which equals to ((void *)16).
So this patch fix this with just doing the zero check before calling
kmemdup().
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Analog Devices SSM4567 is a boost class-D audio amplifier.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
We try to write index registers into cache when we write an index
register, but we change the reg value before updating the cache.
As a result, the cache is never be updated. This patch will fix
this issue.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
This patch corrects some incorrect default value in the cache.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Some arizona devices have a second asynchronous sample rate, add the
registers necessary to support this.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
When we have PCM (FE/BE) opened or DAPM widgets triggered we need power
up/down DSP accordingly. The DSP will do ref count of these requests
i.e. link these runtime_get/put calls of DSP
Also fix some preexisting spacing error.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
includes miscellaneous cleanup of other PHY drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Efl5
-----END PGP SIGNATURE-----
Merge tag 'phy-for_3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes:
Adds 3 new PHY drivers stih407, stih41x and rcar gen2 PHY. It also
includes miscellaneous cleanup of other PHY drivers.
Conflicts:
MAINTAINERS
Fix double unlock of fe card mutex introduced by patch 8f70e515a8
"ASoC: soc-pcm: fix dpcm_path_get error handling"
The first unlock is at line 106, and the unlock is at line 149. we
should remove the first unlock.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some boards have this pin statically tied and do not require any configuration,
some other boards allow to enable chip using GPIO.
Add an option that tells which GPIO is used to power the audio codec.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no other use for extmic_mux than setting it to zero so remove it.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
struct max98090_priv member irq is now used only locally in
max98090_i2c_probe() and can be removed.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Keep MAX98090 interrupt requested after i2c device probing as long as the
driver is loaded. This fixes the issue where subsequent codec probe
max98090_probe() call fails in interrupt request since interrupt wasn't
freed over codec remove-reprobe cycle.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes a bug when using the SOC_DOUBLE_R_RANGE_TLV macro in
the invert mode. In the non-invert case, e.g.
SOC_DOUBLE_R_RANGE_TLV("<name>", <reg_l>, <reg_r>,
0, 40, 255, 0, <tlv>)
the range sent to the hardware is 40..255, but in the invert case:
SOC_DOUBLE_R_RANGE_TLV("<name>", <reg_l>, <reg_r>,
0, 40, 255, 1, <tlv>)
the range 215..0 was being sent to the hardware. This commit
corrects this to 255..40 so it is consistent with the non-invert
case.
Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
USB hub has started to use a workqueue instead of kthread. Let's update
the documentation and comments here and there.
This patch mostly just replaces "khubd" with "hub_wq". There are only few
exceptions where the whole sentence was updated. These more complicated
changes can be found in the following files:
Documentation/usb/hotplug.txt
drivers/net/usb/usbnet.c
drivers/usb/core/hcd.c
drivers/usb/host/ohci-hcd.c
drivers/usb/host/xhci.c
Signed-off-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixed sparse warning of incorrect type (different address spaces) in
cthw20k1.c and cthw20k2.c which was being actually caused as mem_base
was of the type unsigned long.
Again as mem_base was previously unsigned long , so it required many
typecasts in the code to convert interger to pointer.
Now after giving the correct type of mem_base as void __iomem *
we can also remove those typecasts maintaining the same functionality
and logic of the code.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If one input has a boost and another one has not, and they're equal
otherwise, it's more likely you want to use the input with the boost
as your primary input.
See hda-emu.git/codecs/canonical/cx20590-lenovo-20b2z00bus-ccert-201305-13496
for an example.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The next patch will use it, so make it visible across modules.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit e3f205a72c ("ASoC: Remove locking in
snd_soc_{new,free}_ac97_codec()") overlooked a unlock on one of the error
paths.
Fixes: e3f205a72c ("ASoC: Remove locking in snd_soc_{new,free}_ac97_codec()")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since every caller of snd_hda_jack_detect_enable_callback needs to
use the macros from err.h, it makes sense to include it directly
from hda_jack.h.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
code can raise a panic when the ssi_private->pdev is null
[...]
/*
* If codec-handle property is missing from SSI node, we assume
* that the machine driver uses new binding which does not require
* SSI driver to trigger machine driver's probe.
*/
if (!of_get_property(np, "codec-handle", NULL))
goto done;
[...]
ssi_private->pdev =
platform_device_register_data(&pdev->dev, name, 0, NULL, 0);
[...]
done:
if (ssi_private->dai_fmt)
_fsl_ssi_set_dai_fmt(ssi_private, ssi_private->dai_fmt);
Proposal was to not use ssi_private->pdev->dev here but adding a new parameter
of *dev pointer to this _set_dai_fmt() -- passing pdev->dev in probe() and
cpu_dai->dev in fsl_ssi_set_dai_fmt().
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reported-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_new_ac97_codec() and snd_soc_free_ac97_codec() are called from
within a CODEC's probe() and remove() callbacks. Those will not run
concurrently against each other for the same CODEC instance, hence it is not
necessary to protect the two functions with a mutex.
This removes the last user in the ASoC core of the snd_soc_codec mutex field
and will allow us to eventually remove it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add sidetone function
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds partial support for the Xonar Xense.
[trivial coding style fixes by tiwai]
Signed-off-by: Harley Griggs <hgriggs@posteo.co.uk>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
KoreController and KoreController2 need an EP1_CMD_DIMM_LEDS command to set
their LEDs, not EP1_CMD_WRITE_IO.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reported-and-tested-by: Brad Wilson <brad.wilson.00@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The calculated frame size was wrong because snd_pcm_format_physical_width()
actually returns the number of bits, not bytes.
Use snd_pcm_format_size() instead, which not only returns bytes, but also
simplifies the calculation.
Fixes: 8bea869c5e ("ALSA: PCM midlevel: improve fifo_size handling")
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
this remove all reference to gpio_remove retval in all driver
except pinctrl and gpio. the same thing is done for gpio and
pinctrl in two different patches.
Signed-off-by: Abdoulaye Berthe <berthe.ab@gmail.com>
Acked-by: Michael Büsch <m@bues.ch>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Check if ipg clock is in clock-names property, then we can move the
ipg clock enable and disable operation to startup and shutdown, that
is only enable ipg clock when ssi is working and keep clock is disabled
when ssi is in idle.
But when the checking is failed, remain the clock control as before.
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
gpiochip_remove() will return void eventually.
Thus this patch removes return value checking for gpiochip_remove().
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics
and a slightly buggy strncasecmp. The latter is the POSIX name, so
strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper
for the new strncasecmp to avoid breaking existing users.
To allow the compat wrapper strnicmp to be removed at some point in
the future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
linux/slab.h was included twice.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch add support for various modules like eq etc for mrfld DSP.
All these modules will be exposed to usermode as bytes controls.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For internal stream i.e. BE we have don't need trigger ops as that
would be handled by DAPM for us in subsequent patches
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For its headphone, mic and DSP responses, we can use the standard
hda_jack infrastructure in CA0132 driver, too. The only point to
handle carefully is the delayed headphone jack handling. It tries to
react after a certain delay. Here we use the existing block_report
flag in hda_jack_tbl (that was implemented for HDMI).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous fix for STAC/IDT codecs, the automute hooks in VIA
driver can be also removed by enabling the power control callback for
all pins.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now we can register multiple callbacks to each jack, most of hooks
used in STAC/IDT codecs can be removed by enabling the powermap update
callback for all relevant pins. Along with this, the call of
stac_init_power_map() can be moved back to stac_parse_auto_config()
and the own build_controls callback can be removed, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, hda_jack infrastructure allows only one callback per jack, and
this makes things slightly complicated when a driver wants to assign
multiple tasks to a jack, e.g. the standard auto-mute with a power
up/down sequence. This can be simplified if the hda_jack accepts
multiple callbacks.
This patch is such an extension: the callback-specific part (the
function and private_data) is split to another struct from
hda_jack_tbl, and multiple such objects can be assigned to a single
hda_jack_tbl entry.
The new struct hda_jack_callback is passed to each callback function
now, thus the patch became bigger than expected. But these changes
are mostly trivial.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is mostly driver fixes, the biggest one being the tlv320aic31xx
which is relatively large but simple and device specific. There's a
small fix in the error handling in DPCM too which is relatively minor
error handling fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUF2h1AAoJECTWi3JdVIfQt0UH/155GaSoLBAfnvjBBlmyTTSx
nY/kdZYB9tMR0Y35PuX1Ekd2VNaLFKTEpUsYLLCfvoKezwr0y5Trz5p78g/RoEPH
uU0Z6mQ7/5nepwy3QBnZG3s5TfSxtLA1ifGx0YGn2pY+c1qnhsPRCPTWjQ9lEsQv
f5WfIOMULKCtXT+hHLwzCeKHu1pF6SM6w5Vppys4i+Lu/Ac/7MdD2PzrSR94Y+82
5PftV9HJQil//qFcxQEUUUGPharBu7BsWn8HVqT/oN9FkglZWmHLNIvks+qHmX6/
6GTR7K2FX+2DI4mvRfTz/mb95un1UWzVQByqhhJqt/OohNfZX743ag5bn7M0HUE=
=SME3
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v3.17
This is mostly driver fixes, the biggest one being the tlv320aic31xx
which is relatively large but simple and device specific. There's a
small fix in the error handling in DPCM too which is relatively minor
error handling fix.
Mark Brown