Commit Graph

4122 Commits

Author SHA1 Message Date
Sascha Hauer cb96cf1ad6 [ARM] MX3: add NAND support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:58:02 +01:00
Sascha Hauer 01f71a3719 [ARM] pcm038: Add NAND support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:58:00 +01:00
Sascha Hauer 02870978ea [ARM] MX27: Add NAND resources
This patch adds the platform device and resources for NAND
on mx27 boards.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:58 +01:00
Fabio Estevam 46c3d567af Add default configuration for MX31PDK board.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:58 +01:00
Fabio Estevam 1553a1ec83 Add basic support for MX31PDK board.
Add basic support to the MX31PDK development board, also known
as MX31 3DS or MX31 3-stack board (http://www.freescale.com/imx31pdk).

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:57 +01:00
Sascha Hauer 3dad21a95b [ARM] pcm037: Add support for SRAM device
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:56 +01:00
Guennadi Liakhovetski ba54b95899 [ARM] pcm037: add support for the on-board LAN9217 network controller
smc911x now also supports LAN921{5,7,8} network controllers.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:55 +01:00
Sascha Hauer 3620c0dccf pcm038: add driver for static ram
The pcm038 module (phyCORE-i.MX27) comes with a 512 KiB static RAM which
can be battery buffered. Add mtd_ram support and configure the chip select
line, to which the sram is attached.

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:54 +01:00
Guennadi Liakhovetski 4a7b98d7e7 i.MX31: fix mxc_iomux_set_pad()
mxc_iomux_set_pad() is buggy on i.MX31 - it calculates the register and
the offset therein wrongly. Fix it.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:24 +01:00
Sascha Hauer 1d5aa17be1 [ARM] MX3 iomux: add more pin definitions
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:46:18 +01:00
Sascha Hauer 7bd1822135 [ARM] MX1/MX2: simplify mxc_gpio_setup_multiple_pins
mxc_gpio_setup_multiple_pins used to take several ALLOC_MODE flags. Most
of them are unused, so simplify the function by removing the flags. Also,
instead of using a confusing MXC_GPIO_ALLOC_MODE_RELEASE flag in a function
having alloc in its name, add a mxc_gpio_release_multiple_pins function.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:46:14 +01:00
Julien Boibessot d1900d3a18 [ARM] MX27: add i.MX27 SDHC1 and SDHC2 GPIO declarations
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:46:09 +01:00
Sascha Hauer 1e7f3f48b3 MX27: Add USB pin function defines
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:44:51 +01:00
Sascha Hauer 8c8409539b [ARM] MX27ads: remove unused define
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:44:38 +01:00
Sascha Hauer 7cb3f6d268 [ARM] MX2: Add IRQ_GPIOE definition
The MX2 has 5 gpio ports, IRQ_GPIOE was missing so far.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:44:29 +01:00
Sascha Hauer 619e15508b MX27: Fix EMMA Base addresses
The EMMA (Enhanced Multimedia Engine) is divided into two parts, the
postprocessor and the preprocessor. Fix the base addresses.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:44:17 +01:00
Sascha Hauer 33ebc19d54 [ARM] MX2: DMA updates
This one updates DMA support on MX2 which got broken in:
[ARM] Hide ISA DMA API when ISA_DMA_API is unset

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 12:17:47 +01:00
Ben Dooks e7aa6f46f6 [ARM] S3C: Add UART FIFO selection during arch decompression
Add a configuration option to start the UART FIFOs during the
decompressions sequence to improve boot time when the bootloader
fails to enable the UART FIFOs.

For example, the SMDK6410 UBoot 1.1.6 leaves the FIFOs off.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16 10:32:02 +00:00
Matt Hsu a9c5d23ac7 [ARM] S3C64XX: Correct the EINT IRQ type configuration
Select the correct EINT configuration register when configuring
the external interrupt level/edge type.

Signed-off-by: Matt Hsu <matt_hsu@openmoko.org>
[ben-linux@fluff.org: description improvement]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16 10:19:26 +00:00
Kyungmin Park 11e3bd0923 [ARM] S3C64XX: Mask the pll values correctly
Correct the PLL field masks to ensure the PLL functions return the
right value.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[ben-linux@fluff.org: improve the description text]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16 10:19:13 +00:00
Kyungmin Park e4ea803ab0 [ARM] S3C64XX: Show uncompress messages
Fix the initialisation of the fifo data in the uncompression serial
routines to ensure that if the FIFO is enabled, that the serial output
is not corrupted.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[ben-linux@fluff.org: edit description to add more detail]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16 10:18:55 +00:00
Ben Dooks 9d325f2341 [ARM] S3C: Update time initialisation to fix S3C64XX time problems
The S3C64XX timer is running at the wrong rate due to the
assumptions made in the timer initialisation about the way
the pwm dividers work. This means that time on the S3C64XX
runs twice as fast as it should.

Fix the problem by moving to using the clk framework to setup
the pwm timer clock muxes, as the pwm-clock code has all the
necessary knowledge of how the timer clock inputs are routed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16 10:13:02 +00:00
Ben Dooks b09bcdd4c2 [ARM] S3C64XX: Update TCFG for new timer divider settings.
The S3C64XX series has a new TCFG divider setting to allow the clock
directly through, which means that we need to update the pwm-clock
code to cope with this.

Add <mach/pwm-clock.h> containing the specific code to deal with the
TCFG divider settings and provide any other per-arch data that the
pwm-clock driver needs to function.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16 10:01:23 +00:00
David S. Miller eb14f01959 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/e1000e/ich8lan.c
2008-12-15 20:03:50 -08:00
Ben Dooks 438a5d42e0 [ARM] SMDK6410: Add LCD (LCD48WVGA) definitions
Add support for the LCD 48WVGA module attached to the
SMDK6410.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:57:26 +00:00
Ben Dooks c7a0401e61 [ARM] S3C64XX: Add standard S3C64XX 24BPP LCD GPIO setup
Add a standard helper to configure the LCD output pins for a 24BPP
display with VSYNC/HSYNC/VDEN.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:57:19 +00:00
Ben Dooks 58435f7b2d [ARM] S3C: Add new FB device definition
Add a device definition for the new S3C framebuffer
driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:56:53 +00:00
Ben Dooks 1aba834da1 [ARM] S3C: Add i2c1 device definition
Add device definition and support functions for the
second i2c device (i2c1). If this is selected, the first
i2c bus will become index 0 instead of index -1.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:56:41 +00:00
Ben Dooks 8f995cc3ac [ARM] S3C: Add register defines for new style framebuffer
Provide  the initial register definitions for the newer
style of framebuffer cores found in the Samsung SoCs
such as S3C2450, S3C64XX.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:55:10 +00:00
Ben Dooks 713e9dede6 [ARM] S3C: Fix SDHCI setup compilation
Fix the compilation of the SDHCI configuration/setup
functions to depend on their respective configuration
variables.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:54:21 +00:00
Ben Dooks d6bc5f70e0 [ARM] S3C6410: Fix gpio configuration for channel 1.
Select the correct GPIO configuration function for channel 1

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:53:59 +00:00
Ben Dooks c33e14c724 [ARM] s3c6400_defconfig: Add SDHCI driver
Add the Samsung SDHCI driver to the build.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:53:51 +00:00
Ben Dooks 6c874d6fa8 [ARM] s3c6400_defconfig: Add I2C driver and devices
Add the new I2C driver and the EEPROM devices to
the system, as well as update to the latest kernel.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:53:23 +00:00
Ben Dooks b24636cff1 [ARM] SMDK6410: Add availability of second hsmmc channel
Add SDHCI channel 1.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:53:05 +00:00
Ben Dooks 44539a7112 [ARM] S3C64XX: Fix MMC0 clock source register mask
Fix the definition of the MMC0 register shift and mask in the
CLKSRC register.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:50:22 +00:00
Ben Dooks 6a5f4b8535 [ARM] S3C64XX: Fix missing definition of s3c64xx_init_io()
The function s3c64xx_init_io was missing from <plat/cpu.h>
and was masked by the SMDK6410 having an local definition.

Fix by removing the SMDK6410 variant and adding it to the
relevant <plat/cpu.h> file.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:48:20 +00:00
Ben Dooks 4f507d19ca [ARM] S3C: Add header for initial i2c device core setup.
Add a header to define setup functions for the i2c
devices.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:47:03 +00:00
Ben Dooks 096941ed1e [ARM] SMDK6410: Add I2C device board information
Add the I2C devices on the SMDK6410.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:46:19 +00:00
Ben Dooks d7ea3743ca [ARM] SMDK6410: Add second I2C channel.
Add the second I2C channel on the SMDK6410.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:46:05 +00:00
Ben Dooks f9e2f3453c [ARM] S3C64XX: Setup functions for i2c bus 1.
Add common gpio setup for i2c bus 1 on all current
S3C64XX architectures.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:43:29 +00:00
Ben Dooks d85fa24c51 [ARM] SMDK6410: Add i2c device
Add i2c bus 0 to the configuration

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:42:55 +00:00
Ben Dooks 55132b8b46 [ARM] S3C64XX: Add i2c device setup for I2C device 0
Add the necessary device initialisation information
for I2C device 0.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:42:21 +00:00
Ben Dooks 26da1bfc56 [ARM] S3C64XX: GPIO definitions for BANKS N,O,P,Q
GPIO register and configuration definitions for GPIO
banks N, O, P and Q.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:41:50 +00:00
Ben Dooks 4162d7e363 [ARM] S3C64XX: GPIO definitions for BANKS G,H,I,J
GPIO register and configuration definitions for GPIO
banks G, H, I and J.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:41:17 +00:00
Ben Dooks b9f2d172f2 [ARM] S3C64XX: GPIO definitions for BANKS D,E,F
GPIO register and configuration definitions for GPIO
banks D, E and F.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:41:10 +00:00
Ben Dooks 995deb638d [ARM] S3C64XX: GPIO definitions for BANKS A,B,C
GPIO register and configuration definitions for GPIO
banks A, B and C.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:40:56 +00:00
Ben Dooks 3e1b776c2b [ARM] S3C: Make i2c device definition common to plat-s3c
Make the device i2c0 common to plat-s3c and move the
definitions from arch/arm/plat-s3c24xx/devs.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:40:26 +00:00
Ben Dooks a2205cd2cb [ARM] S3C: Add SDHCI (HSMMC) channel 1 device definition
Add device definition and support code for the Samsung
HSMMC channel 1 device.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:40:07 +00:00
Ben Dooks 5cc7fd88fc [ARM] S3C6410: Add helper for setting SDHCI device information
Add the necessary helper functions for setting up the SDHCI
device information.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:39:34 +00:00
Ben Dooks ea522c7a54 [ARM] S3C: Add Samsung SDHCI register definitions
Add the specific register definitions for the Samsung SDHCI
(HSMMC) block for the S3C2443 and S3C64XX series.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:39:24 +00:00
Ben Dooks 3627379fc6 [ARM] S3C6XX: Add enable for clk_48
Add apropriate enable call for clk_48m.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:36:29 +00:00
Ben Dooks 1451325ced [ARM] S3C6400: Register clk_fout_epll
The clk_fout_epll clock wasn't registered as part of the initial clock
work, which can cause problems if it is used by one of the hardware
blocks.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:36:22 +00:00
Ben Dooks 21b23664b9 [ARM] S3C: Add new GPIO configuration calls
Add new GPIO configuration calls that mesh with the
new gpiolib support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:34:15 +00:00
Ben Dooks 89d043c3db [ARM] S3C64XX: GPIO library support
Add gpiolib registration for the GPIOs available on the
S3C64XX platform

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:33:59 +00:00
Ben Dooks 8a53bdb907 [ARM] S3C: Add GPIO chip tracking
The gpiolib driver keeps its chip array to itself
and having a separate array for s3c-only gpios stops
any non-s3c gpio being used in one of the s3c specific
configuration calls.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:33:42 +00:00
Ben Dooks 7db6c82a37 [ARM] S3C: Move common GPIO code from plat-s3c24xx
Move the common parts of the GPIO code into plat-s3c
for use with both the s3c24xx and s3c64xx systems.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:33:20 +00:00
Ben Dooks efd3a8eb15 [ARM] S3C64XX: Add gpio bank numbering
Define the gpio numbers for the S3C64XX GPIO banks
available on the S3C6400 and S3C6410.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:33:08 +00:00
Ben Dooks 39057f237d [ARM] SMDK6410: Add HSMMC0 device
Add HSMMC0 device to SMDK6410.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:32:52 +00:00
Ben Dooks 5b323c7beb [ARM] S3C: Move HSMMC device definition to plat-s3ec
Move the definition for the hsmmc device to plat-s3c
to be shared between the s3c24xx and s3c64xx platforms.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:32:34 +00:00
Ben Dooks 8cdf47cb4b [ARM] S3C64XX: Add external interrupt group definitions
Add definitions for the external interrupt groups which accompany
the original IRQ_EINT from the s3c24xx series.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:19:49 +00:00
Ben Dooks f945ee13cf [ARM] S3C64XX: Fix warnings from map_io initilaisers
Discard the 'void *' from the pointers used for the
virtual addresses when setting up the .virtual fields
of the io map to avoid implicit cast warnings

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

 Index: linux.git/arch/arm/plat-s3c64xx/cpu.c
===================================================================
2008-12-15 23:19:35 +00:00
Ben Dooks 39669f594e [ARM] S3C64XX: Reduce some output from INFO to DEBUG
Some of the startup output can be reduced to
KERN_DEBUG from KERN_INFO as it is only really
useful when trying to debug kernel initialisation
problems.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:18:21 +00:00
Ben Dooks 92117a1fd3 [ARM] S3C64XX: Add s3c6400_defconfig
Add a basic defconfig for s3c6400 series machines.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:17:55 +00:00
Ben Dooks 5718df9dd0 [ARM] SMDK6410: Initial machine support
Initial machine support for the Samsung SMDK6410.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:16:07 +00:00
Ben Dooks 80789e7915 [ARM] S3C64XX: Add IRQ_EINT support
Add the necessary code to support IRQ_EINT(x) on
the S3C64XX series of CPUs.

Note, since there is no GPIO configuration support
in the kernel, the irq set_type method does not
configure the relevant pin to interrupt.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:15:46 +00:00
Ben Dooks 94df868b88 [ARM] S3C64XX: Map GPIO block
Add mapping for GPIO block in the static mappings.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:03:41 +00:00
Ben Dooks a801cd6192 [ARM] VIC: Update asm/hardware/vic.h with PL192 information
The original arch/arm/include/asm/hardware/vic.h was
written for the PL190 ARM VIC implementation, and as
such does not have any information about the PL192
version.

Add details about the PL192 and PL190 specific registers
and any changes between the two units.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:03:10 +00:00
Ben Dooks 3e694d4bc6 [ARM] S3C64XX: Demux UART interrupts
Add demux handling for the UART interrupts
generated by the VIC into their seperate IRQs
that the serial driver can register.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:02:58 +00:00
Russell King 7e1548a597 Merge branch 'omap3-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel 2008-12-15 22:13:26 +00:00
Ben Dooks b690ace50b [ARM] S3C6400: serial support for S3C6400 and S3C6410 SoCs
Add support to the Samsung serial driver for the S3C6400
and S3C6410 serial ports.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:58:11 +00:00
Ben Dooks cf18acf0e0 [ARM] S3C64XX: Clock support for S3C6400/S3C6410
Add the PLL clock initialisation and clock registration
and include the clocks sourced via CLKDIVx for most of
the on-chip peripherals.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:54:36 +00:00
Ben Dooks c652d2ddb9 [ARM] S3C: Add TICK_MAX for timer code
Add TICK_MAX definition for the timer code
as the S3C64XX series have 32bit capable
PWM timers.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:54:16 +00:00
Ben Dooks 4b31d8b225 [ARM] S3C64XX: Add initial clock framework
Add the initial clocks definitions for the s3c6400
and s3c6410. Move the epll and ext clock from the
s3c2443 support into the common code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:53:58 +00:00
Ben Dooks 952b564b4d [ARM] S3C64XX: Add PLL definitions
Add definitions for the s3c6400 epll and main pll
as well as functions to decode the rate. Add

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:53:38 +00:00
Ben Dooks aa64ea3f78 [ARM] S3C64XX: Common init code for S3C6400 and S3C6410
Add the common initialisation code for both the
S3C6400 and S3C6410, the UART registration.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:53:14 +00:00
Ben Dooks f982dc5321 [ARM] S3C64XX: Map timer memory and interrupts
Add the physical to virtual memory mapping and the
necessary interrupt demuxing for the PWM timer blocks.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:52:51 +00:00
Ben Dooks e550ae7416 [ARM] S3C: Fix PWM build on S3C6400
The pwm-clock.c needs <mach/map.h> which is included
via other means on S3C24XX systems, so ensure it is
explicitly included.

Remove the includes of regs-clock.h and regs-gpio.h as
these are not needed by the build.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:52:11 +00:00
Ben Dooks 59ff6f2c0e [ARM] S3C6400: Add <mach/tick.h>
Add the necessary support for the timer on the
S3C6400 and S3C6410 by adding <mach/tick.h>

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:51:52 +00:00
Ben Dooks d9b79fb568 [ARM] S3C64XX: Add VIC0 and VIC1 sourced interripts
Add and initialise the two VIC (PL192) found on
the S3C64XX series CPUs.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:51:22 +00:00
Ben Dooks d626aeedc9 [ARM] S3C6410: Initial CPU support code
Initial support for the Samsung S3C6410 SoC.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:51:04 +00:00
Ben Dooks beda30f6a9 [ARM] S3C64XX: Basic CPU detection and map initialisation
Initialise the basic physical to virtual mappings and
then detect the CPU that the system is being run on so
that the cpu code code can call the correct initialisation
code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:50:31 +00:00
Ben Dooks c142f173cd [ARM] S3C64XX: Add IRQ definitions for VIC0 and VIC1
Add IRQ definitions for the VIC0 and VIC1 interrupts
on the S3C6400 and S3C6410 SoCs.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:50:06 +00:00
Ben Dooks 0241cbb9d6 [ARM] S3C64XX: Add UARTdevice definitions
Add resources and information for the UART deviecs
on the S3C64XX CPUs.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:49:46 +00:00
Ben Dooks e1a2bd1d2f [ARM] S3C64XX: Add system boot-time support
Add the necessary defines for <mach/uncompress.h>
to function and build an working header code block.

Signed-off-by: Ben Doioks <ben-linux@fluff.org>
2008-12-15 21:49:32 +00:00
Ben Dooks 0660fed465 [ARM] S3C64XX: Add <plat/regs-clock.h>
Initial clock register defines.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:49:11 +00:00
Ben Dooks dcb0902b47 [ARM] S3C64XX: Add <mach/debug-macro.S>
Add the necessary support for the kernel low-level
debug macros via <mach/debug-macro.S>

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:47:31 +00:00
Ben Dooks a520979745 [ARM] S3C64XX: Add <mach/entry-macro.S>
Add the include for the interrupt entry macros needed
to be included by <mach/entry-macro.S> for the kernel
interrupt handler.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:47:29 +00:00
Ben Dooks d521f87e9c [ARM] S3C64XX: Initial arch header files
Add the initial header files for the S3C64XX support to satisfy the
minimal requirements to build a kernel. Some definitions will therefore
be placeholders or empty functions that will ensure that the system can
build and have base functionality. These will be filled in at a later
date.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:47:27 +00:00
Ben Dooks a08ab63761 [ARM] S3C64XX: Initial arch directory
Add the initial PLAT_S3C64XX support files
and directory structure.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:47:24 +00:00
Ben Dooks 9bc1aaeac0 [ARM] S3C24XX: Split timer pending code out
Split the timer pending code out to a seperate per-machine
header so that when compiling for mach-s3c2410 or mach-s3c24a0
we can use the right timer code without having to #ifdef the
timer driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:41 +00:00
Ben Dooks bcae8aeb32 [ARM] S3C24A0: Initial architecture support files
Initial architecture support for the S3C24A0 ARCH_S3C24A0.

We don't yet add an kconfig entry in the main arch/arm/Kconfig
file as the series is not complete, so that is left until enough
support is in to be useful.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:39 +00:00
Ben Dooks ce46a9c497 [ARM] S3C24XX: Split map.h into plat-s3c24xx and mach-s3c2410
Split the map.h definitions into common S3C24XX code by
adding arch/arm/plat-s3c24xx/include/plat/map.h and
altering the machine specific header for the S3C24A0.

As we add a new <plat/map.h> we move the original one
in arch/arm/plat-s3c include directory to be called
map-base.h to distinguish the two files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:38 +00:00
Sandeep Patil 1d4bab0824 [ARM] S3C24A0: Serial port definitions and driver support.
Add serial support for S3C24A0, based on current S3C2410
UART driver. It adds necessary new defines in regs-serial.h
for S3C24A0 and the code to support this device in
drivers/serial/s3c24a0.c

Signed-off-by: Sandeep Patil <sandeep.patil@azingo.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:36 +00:00
Ben Dooks f0c9eb4ec2 [ARM] S3C24A0: Debug macro definitions
Add the necessary debug macros for the S3C24A0 to enable
kernel debugging, and fix a bug with selecting the wrong
default debug implementation from the base include.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:33 +00:00
Sandeep Patil f1cb9eba5b [ARM] S3C24A0: Correct S3C2410_PA_GPIO in S3C24XX_VA_GPIO
The definition of S3C24XX_VA_GPIO used S3C2410_PA_GPIO
where it should have read S3C24XX_PA_GPIO.

Signed-off-by: Sandeep Patil <sandeep.patil@azingo.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:31 +00:00
Sandeep Patil ddbf5654b4 [ARM] S3C24A0: arch/arm/mach-s3c24a0/include/mach header files
Add initial arch/arm/mach-s3c24a0/include/mach header
files for supporting Samsung S3C24A0 SoC.

Signed-off-by: Sandeep Patil <sandeep.patil@azingo.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:28 +00:00
Ben Dooks 7d2dbcf9fa [ARM] S3C: Fix scaler1 clock rate information
The pwm-scaler0 and pwm-scaler1 clocks have their
.id field set to -1 as they are not referenced to
any specific device. However, parts of the pwm-clock
code used the .id field to identify which scaler
clock was being used.

Fix the problem by comparing against the pointer to
the clock to identify the scalers.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:25 +00:00
Ben Dooks 82fd8e681d [ARM] S3C: Add set_rate/round_rate methods for pwm-scaler clock
Add the set_rate and round_rate methods for the pwm-scaler
clock for use with the time code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:24 +00:00
Ben Dooks f2edc7565a [ARM] S3C24XX: Reduce code lineage of gpiolib.c
All the s3c24xx gpiolib chips share the same get/set
calls and all but one bank shares the same calls for
.direction_input and .direction_output methods.

Change the initialisation process to use an new call
to register the chips that fills in any blank calls
with the default values to avoid having to fill them
in the structure initialisers.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:24 +00:00
Ben Dooks cec444b790 [ARM] S3C: BUG_ON() if clock has already been registered
Add a simple check when registering a clock on whether
the clock has already been added to the list.

Any attempt to re-register a clock will cause the
clock list to be come looped and thus produces silent
failures when looking up clocks.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:22 +00:00
Ben Dooks 93b458858f [ARM] S3C: Move pwm-clock.c to arch/arm/plat-s3c
Move pwm-clock.c to arch/arm/plat-s3c
to be shared with the S3C64XX implementations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:20 +00:00
Ben Dooks adbefaa5fd [ARM] S3C: Move core clock support to plat-s3c
Move the core clock registration and definitions
in arch/arm/plat-s3c24xx/clock.c to arch/arm/plat-s3c
to be shared with the S3C64XX implementations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:18 +00:00
Ben Dooks b915a12511 [ARM] S3C: Move time.c to arch/arm/plat-s3c
Move time.c to arch/arm/plat-s3c
to be shared with the S3C64XX implementations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:15 +00:00
Ben Dooks 6af0e929e9 [ARM] S3C: Move S3C2410_EXTINT to common regs-irqtype.h header
Add a common include file (regs-irqtype.h) for the IRQ
trigger control register values S3C2410_EXTINT*.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:13 +00:00
Ben Dooks a503059c14 [ARM] S3C24XX: Move headers from plat-s3c24xx to plat-s3c
Move clock.h, cpu.h and devs.h to plat-s3c for use
with the s3c64xx support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:10 +00:00
Ben Dooks e425382ed9 [ARM] S3C24XX: Update clock data on resume
Update the clock settings on resume for suspend/resume
support so that if the boot loader changes anything or
the system's PLL is reset then we return with the correct
settings.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:08 +00:00
Ben Dooks c3391e36d6 [ARM] S3C24XX: Change clock locking to use spinlocks.
We cannot sleep if we have cpufreq pm enabled during some
of the clock operations, so change to use a spinlock to
protect the clock system.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:07 +00:00
Ben Dooks e24b864ab3 [ARM] S3C24XX: Split pll code out of regs-clock.h
Move the PLL calculation code into it's own header
file for re-use with the other plat-s3c24xx based
systems such as the S3C24A0.

Note, we change the name of s3c2410_get_pll to the
more generically named s3c24xx_get_pll as well as
the related defintions.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:02 +00:00
Ben Dooks 93bc6b6371 [ARM] S3C24XX: Split DCLK/CLKOUT definitions out of clock.c
Only certain boards need these clocks, and they are not
available on some CPUs (such as the S3C24A0) so remove
them from arch/arm/plat-s3c24xx/clock.c and into their
own file with appropriate Kconfig entries.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:00 +00:00
Ben Dooks 74b265d4e0 [ARM] S3C24XX: Move initialisation code to arch/arm/plat-s3c
We need to add plat-s3c to the build to get the headers
that will go in here once moved from include/asm-arm so
we may as well put some useful common s3c code in here
to stop the errors generated form having nothing built.

The cpu setup is now passed the cpu idcode and the table
of supported cpus to s3c_init_cpu() to abstract the
cpu identification out of the initial io setup.

As well as moving the cpu initialisation code, we move the
map of the board specific items up to the calling code as
none of the map_io() functions actually do anything other
than pass this to iotable_init().

This patch does not rename any of the init functions that
will be common to s3c24xx and any other s3c architectures
as this can be done at a later date as it will touch all
the board support files which use functions such as
s3c24xx_init_clocks() and s3c24xx_init_uarts().

Note, the header arch/arm/plat-s3c24xx/include/plat/cpu.h
still has functions that are used by both the cpu and
board initialisation functions. This means that each board
has definitions specific to the cpu support included and
the vice-versa.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:45:57 +00:00
Ben Dooks 2cd493fc10 [ARM] S3C24XX: Add default <mach/io.h> header
Add a default header for <mach/io.h> for systems
such as the S3C24A0 which do not need any of the
complex code that the S3C2410 uses.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:45:55 +00:00
Ben Dooks 112f4a708d [ARM] S3C24XX: Move vmalloc.h to plat-s3c
vmalloc.h is common across all the current s3c platforms,
so move it to arch/arm/plat-s3c/include/mach to be used
for all the targets.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:45:52 +00:00
Ben Dooks 95f42b3911 [ARM] S3C: Make <mach/timex.h> common
Move <mach/timex.h> to arch/arm/plat-s3c/include/mach/timex.h
so it can be the default for all S3C based architectures.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:45:50 +00:00
Ben Dooks 1b3ba68884 [ARM] S3C2410: Move base clock code to plat-s3c24xx
Move the S3C2410 base clock list to arch/arm/plat-s3c24xx
as this code is common to the S3C2410, S3C2440 and S3C2442
cpus.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:45:47 +00:00
Ben Dooks 7f565ecc33 [ARM] S3C: Add <plat/cpu-freq.h> for initial cpufreq definitions
This is the header file that defines the basic cpu frequency
scalling support for the Samsung S3C series of SoC.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:45:45 +00:00
Ben Dooks b2a6cf3b1e [ARM] S3C24XX: Default SPI pin configuration for SPI
Add a set of default pin configuration routines for
setting up the SPI gpio configuration when using the
hardware SPI driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:45:42 +00:00
Russell King 1f7f569c0a Merge branch 'for_rmk' of git://git.mnementh.co.uk/linux-2.6-im into devel 2008-12-15 10:36:25 +00:00
Russell King 67306da610 [ARM] Ensure linux/hardirqs.h is included where required
... for the removal of it from asm-generic/local.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-15 10:34:48 +00:00
Ian Molton b1ae1b7b27 [ARM] pxa: Add multi-io support for e-series
This patchset provides support for the TMIO based IO controller used in the
    Toshiba e-series PDAs.

    Signed-off-by: Ian Molton <spyro@f2s.com>
    Acked-by: Samuel Ortiz <sameo@openedhand.com>
    Acked-by: Eric Miao <eric.y.miao@gmail.com>
2008-12-15 03:29:34 +00:00
Russell King a02f45cfca [ARM] move asm/xip.h's mach/hardware.h include to mach/xip.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14 13:22:51 +00:00
Julia Lawall 6ce1b871db [ARM] eliminate NULL test and memset after alloc_bootmem
As noted by Akinobu Mita in patch b1fceac2b9,
alloc_bootmem and related functions never return NULL and always return a
zeroed region of memory.  Thus a NULL test or memset after calls to these
functions is unnecessary.

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E;
statement S;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...)
... when != E
(
- BUG_ON (E == NULL);
|
- if (E == NULL) S
)

@@
expression E,E1;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...)
... when != E
- memset(E,0,E1);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14 12:05:03 +00:00
Sascha Hauer d517cab1c7 [ARM] pcm037: add 1wire support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14 12:05:02 +00:00
Sascha Hauer d40a09920b [ARM] MX2 pcm038: add 1-wire master support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14 12:05:02 +00:00
Sascha Hauer a840592933 [ARM] MX31: add w1 platform_device and resources
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14 12:05:02 +00:00
Sascha Hauer 3d89baa73a [ARM] MX2: Add W1 device/resources
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14 12:05:01 +00:00
Randy Dunlap 3909845e26 [ARM] fix kernel-doc syntax
Fix kernel-doc notation to use correct syntax.  Even though this should be
moved to where the function is actually implemented...

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14 12:02:39 +00:00
Daniel Silverstone 7180d868e3 [ARM] DSM320: Update KS8695 defconfig to include DSM320
Update the KS8695 defconfig to bring it up to modern config
standards and include the DSM320 and appropriate drivers for the
DSM320 (E.g. prism54).

Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-14 11:34:48 +00:00
Daniel Silverstone 6174dee514 [ARM] DSM320: Add support for the DSM320
Add support for the D-Link DSM-320 Wireless Media Player which is
based on the Micrel KS8695 SoC.

Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-14 11:34:48 +00:00
Ben Dooks 7ef71320eb [ARM] KS8695: Add GPIO to IRQ mapping function
Use the GPIOlib .to_irq call to map KS8695 GPIOs
to the relevant IRQ line.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-14 11:34:47 +00:00
Daniel Silverstone 72880ad866 [ARM] KS8695: Fixup the KS8695 GPIO to be GPIOLIB
This patch is as small a change as possible to the KS8695 GPIO layer
to use GPIOLIB to allow the generic GPIO expanders and the like to
be compiled.

As a side-effect, we also remove __init_or_module from several
functions which could be called by drivers such as i2c-gpio which
could plausibly be compiled into a non-modular kernel.

Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk>
Signed-off-by: Vincent Sanders <vince@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-14 11:34:47 +00:00
Daniel Silverstone fbd627100b [ARM] KS8695: Fix up device registration.
The KS8695 device.c provides registration functionality for the
KS8695's various devices such as watchdog timers and ethernet
devices. Rather than predicating those on the config options for the
drivers, always register the platform devices so that a later built
module can hook on. Also, the ethernet used to register virtual
addresses in the platform data. This is wrong and so this patch
changes them to physical addresses and also passes in the
appropriate physical region for the PHY or Switch as appropriate.

Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-14 11:34:46 +00:00
Julia Lawall 442a902262 [ARM] arch/arm/common/sa1111.c: Correct error handling code
If it is reasonable to apply PTR_ERR to the result of calling clk_get, then
that result should first be tested with IS_ERR, not with !.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E,E1;
@@

if (
-   E == NULL
+   IS_ERR(E)
   ) { <+... when != E = E1
        PTR_ERR(E)
       ...+> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14 11:03:46 +00:00
Rusty Russell 320ab2b0b1 cpumask: convert struct clock_event_device to cpumask pointers.
Impact: change calling convention of existing clock_event APIs

struct clock_event_timer's cpumask field gets changed to take pointer,
as does the ->broadcast function.

Another single-patch change.  For safety, we BUG_ON() in
clockevents_register_device() if it's not set.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
2008-12-13 21:20:26 +10:30
Rusty Russell 0de26520c7 cpumask: make irq_set_affinity() take a const struct cpumask
Impact: change existing irq_chip API

Not much point with gentle transition here: the struct irq_chip's
setaffinity method signature needs to change.

Fortunately, not widely used code, but hits a few architectures.

Note: In irq_select_affinity() I save a temporary in by mangling
irq_desc[irq].affinity directly.  Ingo, does this break anything?

(Folded in fix from KOSAKI Motohiro)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Acked-by: Ingo Molnar <mingo@redhat.com>
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: jeremy@xensource.com
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
2008-12-13 21:20:26 +10:30
Rusty Russell 98a79d6a50 cpumask: centralize cpu_online_map and cpu_possible_map
Impact: cleanup

Each SMP arch defines these themselves.  Move them to a central
location.

Twists:
1) Some archs (m32, parisc, s390) set possible_map to all 1, so we add a
   CONFIG_INIT_ALL_POSSIBLE for this rather than break them.

2) mips and sparc32 '#define cpu_possible_map phys_cpu_present_map'.
   Those archs simply have phys_cpu_present_map replaced everywhere.

3) Alpha defined cpu_possible_map to cpu_present_map; this is tricky
   so I just manipulate them both in sync.

4) IA64, cris and m32r have gratuitous 'extern cpumask_t cpu_possible_map'
   declarations.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Mike Travis <travis@sgi.com>
Cc: ink@jurassic.park.msu.ru
Cc: rmk@arm.linux.org.uk
Cc: starvik@axis.com
Cc: tony.luck@intel.com
Cc: takata@linux-m32r.org
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: paulus@samba.org
Cc: schwidefsky@de.ibm.com
Cc: lethal@linux-sh.org
Cc: wli@holomorphy.com
Cc: davem@davemloft.net
Cc: jdike@addtoit.com
Cc: mingo@redhat.com
2008-12-13 21:19:41 +10:30
Russell King 72aaf09fda Merge git://git.marvell.com/orion into devel 2008-12-13 09:12:51 +00:00
Russell King 67fbc23123 [ARM] fix xm_x2xx_defconfig build errors
drivers/built-in.o: In function `pci_set_consistent_dma_mask':
hid-quirks.c:(.text+0x2664): multiple definition of `pci_set_consistent_dma_mask'
drivers/built-in.o: In function `pci_set_dma_mask':
hid-quirks.c:(.text+0x42c4): multiple definition of `pci_set_dma_mask'

because drivers/pci/pci.c was not seeing the definition disabling these
functions.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13 09:12:09 +00:00
Hartley Sweeten 3e7a728117 [ARM] 5343/1: ep93xx: include linux/i2c.h
Include <linux/i2c.h> in all ep93xx platforms.

Patch "5311/1: add core support for built in i2c bus" will cause build errors due to the following in
arch/arm/mach-ep93xx/include/mach/platform.h:

+void ep93xx_register_i2c(struct i2c_board_info *devices, int num);

The i2c.h header needs to be included in order to define struct i2c_board_info.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13 09:12:09 +00:00
Hartley Sweeten e48f3fa373 [ARM] 5342/1: ep93xx: platform init cleanup
Use EP93XX_*_PHYS_BASE and SZ_* defines in ep93xx platform inits.

The following patch changes the flash memory hard-coded resource
addresses and MACHINE_START boot_params to EP93XX_*_PHYS_BASE and
SZ_* defines to improve readability. Also some minor whitespace
cleanup resulting from previous patches.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13 09:12:08 +00:00
Jaya Kumar 854feaede5 [ARM] 5337/1: gumstix: move am200 specific gpio pins into am200epd.
The gpio setup for AM200 specific GPIO pins should be done in the AM200
code rather than in generic gumstix code.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13 09:12:08 +00:00
Russell King 1124d6d21f [ARM] dma: correct dma_supported() implementation
dma_supported() is supposed to indicate whether the system can support
the DMA mask it was passed, which depends on the maximal address which
can be returned for DMA allocations.  If the mask is smaller than that,
we are unable to guarantee that the driver can reliably obtain suitable
memory.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13 09:12:07 +00:00
Russell King 70d13e083c [ARM] netwinder: clean up GPIO naming
Netwinder was using gpio_xxx names which could clash with the GPIO
layer.  Add a 'nw_' prefix to ensure that these remain separate.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13 09:12:07 +00:00
Uwe Kleine-Koenig 7971db5a4b Merge branch 'for-rmk-misc' into for-rmk 2008-12-12 11:18:54 +01:00
Uwe Kleine-König c4edfced66 at91: warn if irqs are enabled in set_next_event
Thomas claims that irqs are disabled when set_next_event is called.  But
David and Remy claim they saw irqs being enabled here.  As both sides
don't seem to have time to investigate here, start with a warning that
might trigger if the problem still exists.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-By: David Brownell <dbrownell@users.sourceforge.net>
Cc: Bill Gatliff <bgat@billgatliff.com>
Acked-By: Remy Bohmer <linux@bohmer.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
2008-12-12 11:17:08 +01:00
Uwe Kleine-König 72cca72a6c remove a superfluous kconfig type definition
It's either

        bool
        default y

or

        def_bool y

but not a mixture of both.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2008-12-12 11:17:07 +01:00
Uwe Kleine-König 94fa873ff8 Fix configure warnings in defconfigs for netX and Picotux 200
Since May 8 2007 the symbols RTC_INTF_PROC, RTC_INTF_SYSFS and
RTC_INTF_DEV are not tristate anymore.  This fixes the following
warnings:

arch/arm/configs/picotux200_defconfig:1072:warning: symbol value 'm' invalid for RTC_INTF_SYSFS
arch/arm/configs/picotux200_defconfig:1073:warning: symbol value 'm' invalid for RTC_INTF_PROC
arch/arm/configs/picotux200_defconfig:1074:warning: symbol value 'm' invalid for RTC_INTF_DEV

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Simon Richter <Simon.Richter@kleinhenz.com>
Cc: Andrew Victor <linux@maxim.org.za>
2008-12-12 11:17:06 +01:00
Uwe Kleine-König 6ed70a792a small doc fix: ftrace_dyn_arch_init is called by ftrace_init
... not kstop_machine.  Add a note that irqs are disabled.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2008-12-12 11:15:45 +01:00
Nicolas Pitre 58c2467355 [ARM] Kirkwood: update defconfig
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-11 16:39:09 -05:00
Nicolas Pitre b71b9effb5 [ARM] Feroceon: pass proper -mtune argument to gcc
Compilation for the Feroceon core should use -mtune=marvell-f.  This is
available in Code Sourcery's 2008Q3 release at the moment. Otherwise
fall back to -mtune-=xscale.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-11 16:39:09 -05:00
Ronen Shitrit 37787e449b [ARM] Kirkwood: properly handle the WAN port on newer RD88F6281 boards
On newer versions of the RD88F6281 board, the WAN port is connected to
its own ethernet port on the CPU, via a separate PHY, whereas on older
versions of the board, it is connected to one of the PHYs in the
ethernet switch.  In the RD8F6281 setup code, detect which version of
the board we are running on, and instantiate the ethernet ports and
switch driver accordingly.

Signed-off-by: Ronen Shitrit <rshitrit@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-11 16:39:08 -05:00