Once the CAN-bus is open and a packet is sent, the controller switches
into the PASSIVE state. Once the BUS is closed again it goes the back
err-warning. The TX error counter goes 0 -> 0x80 -> 0x7f.
This patch makes sure that the user learns about this state chang
(CAN_STATE_ERROR_WARNING => CAN_STATE_ERROR_PASSIVE)
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Matthias Klein <matthias.klein@optimeas.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In case we don't have FLEXCAN_HAS_BROKEN_ERR_STATE and the user set
CAN_CTRLMODE_BERR_REPORTING once it can not be unset again until reboot.
So in case neither hardware nor user wants the error interrupt disable
the bit.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
devm_ioremap() returns NULL on error, not an ERR_PTR().
Fixes: 33cf756569 ('can: c_can_platform: Fix raminit, use devm_ioremap() instead of devm_ioremap_resource()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When sja1000 is not compiled as module the SJA1000 chip is only
initialized during device registration on kernel boot. Should the chip
get a hardware reset there is no way to reinitialize it without re-
booting the Linux kernel.
This patch adds a check in sja1000_start if the chip is initialized, if
not we initialize it.
Signed-off-by: Mirza Krak <mirza.krak@hostmobility.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pull cifs fixes from Steve French:
"Most important fixes in this set include three SMB3 fixes for stable
(including fix for possible kernel oops), and a workaround to allow
writes to Mac servers (only cifs dialect, not more current SMB2.1,
worked to Mac servers). Also fallocate support added, and lease fix
from Jeff"
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
[SMB3] Enable fallocate -z support for SMB3 mounts
enable fallocate punch hole ("fallocate -p") for SMB3
Incorrect error returned on setting file compressed on SMB2
CIFS: Fix wrong directory attributes after rename
CIFS: Fix SMB2 readdir error handling
[CIFS] Possible null ptr deref in SMB2_tcon
[CIFS] Workaround MacOS server problem with SMB2.1 write response
cifs: handle lease F_UNLCK requests properly
Cleanup sparse file support by creating worker function for it
Add sparse file support to SMB2/SMB3 mounts
Add missing definitions for CIFS File System Attributes
cifs: remove unused function cifs_oplock_break_wait
Pull filesystem fixes from Jan Kara:
"udf, isofs, and ext3 bug fixes"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext3: Count internal journal as bsddf overhead in ext3_statfs
isofs: Fix unbounded recursion when processing relocated directories
udf: avoid unneeded up_write when fail to add entry in ->symlink
Pull x86 platform driver revert from Matthew Garrett:
"This clearly shouldn't have been merged. No excuse on my part"
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
Revert "platform/x86/toshiba-apci.c possible bad if test?"
(one has a CVE), and fixing some problems introduced during the merge window
(the CMA bug came in via Andrew, the x86 ones via yours truly).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=lhLd
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Reverting a 3.16 patch, fixing two bugs in device assignment (one has
a CVE), and fixing some problems introduced during the merge window
(the CMA bug came in via Andrew, the x86 ones via yours truly)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
virt/kvm/assigned-dev.c: Set 'dev->irq_source_id' to '-1' after free it
Revert "KVM: x86: Increase the number of fixed MTRR regs to 10"
KVM: x86: do not check CS.DPL against RPL during task switch
KVM: x86: Avoid emulating instructions on #UD mistakenly
PC, KVM, CMA: Fix regression caused by wrong get_order() use
kvm: iommu: fix the third parameter of kvm_iommu_put_pages (CVE-2014-3601)
These are the two bug fixes I mentioned in the final merge window pull. One
is a reversed logic check in the device busy tests which can cause a nasty
hang and another crash seen in the new SCSI pool support if the use count ever
goes to zero.
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJT85zGAAoJEDeqqVYsXL0Mnw4IAJ7BP+4nUlP7Oib8JfPu4Df2
b6dv3YEGe6th4awrHqUnATusjQLIybk/rgRKb6P50o1iX2VI+rs1mAm9esw9NalS
8aKzDMAv9pTRsRvAhe3AnIVGGCYAekV4AZWmsXQPCKqcsQZSZKAnIerLBf0lBemR
X3+1VhYtbB9z4o0Gpv4E5mR/7CqIouDpe5QGRKRY2+/Yyp2El6Vzwqr9XMLyOvmY
Y9WaIhM1UzABl+NAlDhMnA0Yw27UHJfWY6UWZ3Wa73DQCWsdZ6eydal4g8YNA5pB
+6UjMQKWh/bXHZl8v+eCuuXODXZQGazKOFFoc6SGumxAcuLraCBFsuU5m4AQ0NA=
=v+g2
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"These are the two bug fixes I mentioned in the final merge window
pull. One is a reversed logic check in the device busy tests which
can cause a nasty hang and another crash seen in the new SCSI pool
support if the use count ever goes to zero"
[ The device busy test already got merged from a patch earlier, so is
now duplicated. ]
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] save command pool address of Scsi_Host
[SCSI] fix qemu boot hang problem
The config symbol 'CONFIG_DEBUG_FS' should be protected by a 'ifdef' instead
of a plain 'if'.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 257462dbf3 ("pwm-backlight: switch to gpiod interface")
introduced a regression leading to acquiring a bogus GPIO-0 when
configured from DT without an 'enable-gpios' property.
The driver will happily accept the 0 initialized 'enable_gpio' member
of the struct platform_pwm_backlight_data as valid gpio number, and
request this GPIO as enable pin. In case of multiple driver instances,
the second will fail to register with the error message:
pwm-backlight backlight1.23: failed to request GPIO#0: -16
Fix this by setting enable_gpio in the pdata struct to -EINVAL.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
When running a 32-bit userspace on a 64-bit kernel (eg. i386
application on x86_64 kernel or 32-bit arm userspace on arm64
kernel) some of the perf ioctls must be treated with special
care, as they have a pointer size encoded in the command.
For example, PERF_EVENT_IOC_ID in 32-bit world will be encoded
as 0x80042407, but 64-bit kernel will expect 0x80082407. In
result the ioctl will fail returning -ENOTTY.
This patch solves the problem by adding code fixing up the
size as compat_ioctl file operation.
Reported-by: Drew Richardson <drew.richardson@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1402671812-9078-1-git-send-email-pawel.moll@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The journal blocks of external journal device should not
be counted as overhead.
Signed-off-by: Chin-Tsung Cheng <chintzung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Increase max i2c bus frequency beyond the default for faster
data transfers. According to the manual, these faster speeds are
only available when the board is wired up the right way. In this case,
the vendor kernel has run at this speed for a long time.
sda-delay is needed for talking to RTC on PMIC, otherwise the i2c
controller never sees an ACK. Strangely the other PMIC i2c slave (the
main one) works fine even without this delay. I Chose value 100 to
match the vendor kernel.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The ODROID kernel shows that the PMIC interrupt line is hooked up
to pin GPX3-2.
This is needed for the max77686-irq driver to create the PMIC IRQ
domain, which is needed by max77686-rtc.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
For some reason, the audit patches didn't make it out of -next this
merge window, so revert our temporary hack and let the audit guys deal
with fixing up -next.
This reverts commit 2a8f45b040.
Signed-off-by: Will Deacon <will.deacon@arm.com>
- A correction on imx6dl gpu axi clock setting
- Fix a compilation error which comes after ARMv6K SMP build is allowed
- Fix a typo with pinctrl_esdhc1 in vf610-twr dts
- Correct i.MX6SX pad setting for UART in dts
- Fix i.MX53 VPU clock settings in dts
- Fix a suspend/resume failure seen on Cubox-i board, which is caused
by TLB missing of IOMUXC base address during suspend
- ARCH_HAS_OPP has been removed by commit 78c5e0bb14 (PM / OPP:
Remove ARCH_HAS_OPP), so we need to kill it for IMX
- A small fix on enet reset pin of edmqmx6 board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT80G9AAoJEFBXWFqHsHzOCWQH/0mMyczEhE4bejf7GW/P3+3q
CFsImryJv1PYYpGvzT/ez29Z7Ems4sftRK027BjvkCvYfRYSqEILrvI+UbhPYWHb
G7wR+uWpyb4uBacRDdFNCgcqnYlAhjprdwHbgOfwiiOvM+r3a1TGMg0cNnZA/Rfl
uWeW+2siUSeY+DK9qPLGeiJv5JzIMVQUowlnACQ8/NoYf9l+pjKQvPrLabJcygjC
XnbIDj/699RYKoZw+NKIv5kUSjJrzAEwAgPz78moL0MJANwce78PSlTSLbztC25W
3o1/ByUIaZkeg2a4SGgzXhHXIzQS26EgxZtIQbyZ1/QS+T/uxAiDo9HCARQ9SF4=
=+C4o
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Merge "ARM: imx: fixes for 3.17" from Shawn Guo:
The i.MX fixes for 3.17:
- A correction on imx6dl gpu axi clock setting
- Fix a compilation error which comes after ARMv6K SMP build is allowed
- Fix a typo with pinctrl_esdhc1 in vf610-twr dts
- Correct i.MX6SX pad setting for UART in dts
- Fix i.MX53 VPU clock settings in dts
- Fix a suspend/resume failure seen on Cubox-i board, which is caused
by TLB missing of IOMUXC base address during suspend
- ARCH_HAS_OPP has been removed by commit 78c5e0bb14 (PM / OPP:
Remove ARCH_HAS_OPP), so we need to kill it for IMX
- A small fix on enet reset pin of edmqmx6 board
* tag 'imx-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6sx: fix the pad setting for uart CTS_B
ARM: dts: i.MX53: fix apparent bug in VPU clks
ARM: imx: correct gpu2d_axi and gpu3d_axi clock setting
ARM: dts: imx6: edmqmx6: change enet reset pin
ARM: dts: vf610-twr: Fix pinctrl_esdhc1 pin definitions.
ARM: imx: remove unnecessary ARCH_HAS_OPP select
ARM: imx: fix TLB missing of IOMUXC base address during suspend
ARM: imx6: fix SMP compilation again
Signed-off-by: Olof Johansson <olof@lixom.net>
Now that we support 48-bit physical addressing, update MAX_PHYSMEM_BITS
accordingly.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@caviumnetworks.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
UEFI provides its own method for marking regions to reserve, via the
memory map which is also used to initialise memblock. So when using the
UEFI memory map, ignore any memreserve entries present in the DT.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently when run on an APM platform the ARMv8 defconfig has no viable
options for rootfs other than ramdisk which is rather limiting. Since
we already have both SATA and the bits needed for NFS root enabled we just
need to enable the relevant drivers so do that, helping enable direct
testing of upstream.
If the configuration ends up becoming too big we can consider modularising
some of the drivers and asking people to use an initramfs but for now this
is not an issue.
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When booting via UEFI, the kernel Image is loaded at a 4 kB boundary and
the embedded EFI stub is executed in place. The EFI stub relocates the
Image to reside TEXT_OFFSET bytes above a 2 MB boundary, and jumps into
the kernel proper.
In AArch64, PC relative symbol references are emitted using adrp/add or
adrp/ldr pairs, where the offset into a 4 kB page is resolved using a
separate :lo12: relocation. This implicitly assumes that the code will
always be executed at the same relative offset with respect to a 4 kB
boundary, or the references will point to the wrong address.
This means we should link the kernel at a 4 kB aligned base address in
order to remain compatible with the base address the UEFI loader uses
when doing the initial load of Image. So update the code that generates
TEXT_OFFSET to choose a multiple of 4 kB.
At the same time, update the code so it chooses from the interval [0..2MB)
as the author originally intended.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Vasily Averin says:
====================
cbq: incorrectly low bandwidth blocks limited traffic
v2: patch description changes
Fixes: f0f6ee1f70 ("cbq: incorrect processing of high limits")
Mainstream commit f0f6ee1f70 ("cbq: incorrect processing of high limits")
have side effect: if cbq bandwidth setting is less than real interface
throughput non-limited traffic can delay limited traffic for a very long time.
This happen because of q->now changes incorrectly in cbq_dequeue():
in described scenario L2T is much greater than real time delay,
and q->now gets an extra boost for each transmitted packet.
Accumulated boost prevents update q->now, and blocked class can wait
very long time until (q->now >= cl->undertime) will be true again.
More detailed problem description can be found here:
http://www.spinics.net/lists/netdev/msg292493.html
Following patches should fix the problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now q->now_rt is identical to q->now and is not required anymore.
Signed-off-by: Vasily Averin <vvs@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mainstream commit f0f6ee1f70 ("cbq: incorrect processing of high limits")
have side effect: if cbq bandwidth setting is less than real interface
throughput non-limited traffic can delay limited traffic for a very long time.
This happen because of q->now changes incorrectly in cbq_dequeue():
in described scenario L2T is much greater than real time delay,
and q->now gets an extra boost for each transmitted packet.
Accumulated boost prevents update q->now, and blocked class can wait
very long time until (q->now >= cl->undertime) will be true again.
To fix the problem the patch updates q->now on each cbq_update() call.
L2T-related pre-modification q->now was moved to cbq_update().
My testing confirmed that it fixes the problem and did not discover
any side-effects
Fixes: f0f6ee1f70 ("cbq: incorrect processing of high limits")
Signed-off-by: Vasily Averin <vvs@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The latest kernel fails to boot qemu arm images when using scsi
for disk access. Boot gets stuck after the following messages.
brd: module loaded
sym53c8xx 0000:00:0c.0: enabling device (0100 -> 0103)
sym0: <895a> rev 0x0 at pci 0000:00:0c.0 irq 93
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi host0: sym-2.2.3
Bisect points to commit 71e75c97f9 ("scsi: convert device_busy to
atomic_t"). Code inspection shows the following suspicious change
in scsi_request_fn.
out_delay:
- if (sdev->device_busy == 0 && !scsi_device_blocked(sdev))
+ if (atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
blk_delay_queue(q, SCSI_QUEUE_DELAY);
}
'sdev->device_busy == 0' was replaced with 'atomic_read(&sdev->device_busy)',
meaning the logic was reversed. Changing this expression to
'!atomic_read(&sdev->device_busy)' fixes the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
Reviewed-by: Webb Scales <webbnh@hp.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We did not check relocated directory in any way when processing Rock
Ridge 'CL' tag. Thus a corrupted isofs image can possibly have a CL
entry pointing to another CL entry leading to possibly unbounded
recursion in kernel code and thus stack overflow or deadlocks (if there
is a loop created from CL entries).
Fix the problem by not allowing CL entry to point to a directory entry
with CL entry (such use makes no good sense anyway) and by checking
whether CL entry doesn't point to itself.
CC: stable@vger.kernel.org
Reported-by: Chris Evans <cevans@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
We have released the ->i_data_sem before invoking udf_add_entry(),
so in following error path, we should not release this lock again.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
get_system_type() is not thread-safe on OCTEON. It uses static data,
also more dangerous issue is that it's calling cvmx_fuse_read_byte()
every time without any synchronization. Currently it's possible to get
processes stuck looping forever in kernel simply by launching multiple
readers of /proc/cpuinfo:
(while true; do cat /proc/cpuinfo > /dev/null; done) &
(while true; do cat /proc/cpuinfo > /dev/null; done) &
...
Fix by initializing the system type string only once during the early
boot.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Cc: stable@vger.kernel.org
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: http://patchwork.linux-mips.org/patch/7437/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
The CPS code is doing several memory loads when configuring the VPEs
from secondary cores, so the segmentation control registers must be
initialized in time otherwise the kernel will crash with strange
TLB exceptions.
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: http://patchwork.linux-mips.org/patch/7424/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Rename 'eva_entry' to 'platform_eva_init' as required by the new
'eva_init' macro in the eva.h header. Since this macro is now used
in a platform dependent way, it must not depend on its caller so move
the t1 register initialization inside this macro. Also set the .reorder
assembler option in case the caller may have previously set .noreorder.
This may allow a few assembler optimizations. Finally include missing
headers and document the register usage for this macro.
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: http://patchwork.linux-mips.org/patch/7423/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Generic code may need to perform certain operations when EVA is
enabled, for example, configure the segmentation registers during
boot. In order to avoid using more CONFIG_EVA ifdefs in the arch code,
such functions will be added in this header instead.
Initially this header contains a macro which will be used by generic
code later on during VPEs configuration on secondary cores.
All it does is to call the platform specific EVA init code in case
EVA is enabled.
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: http://patchwork.linux-mips.org/patch/7422/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Commit 4c21b8fd8f (MIPS: seccomp: Handle indirect system calls (o32))
added indirect syscall detection for O32 processes running on MIPS64
but it did not work as expected. The reason is the the scall64-o32
implementation differs compared to scall32-o32. In the former, the v0
(syscall number) register contains the absolute syscall number
(4000 + X) whereas in the latter it contains the relative syscall
number (X). Fix the code to avoid doing an extra addition, and load
the v0 register directly to the first argument for syscall_trace_enter.
Moreover, set the .reorder assembler option in order to have better
control on this part of the assembly code.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: http://patchwork.linux-mips.org/patch/7481/
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: James Hogan <james.hogan@imgtec.com>
On MIPS64, O32 processes set both TIF_32BIT_ADDR and
TIF_32BIT_REGS so the previous condition treated O32 applications
as N32 when evaluating seccomp filters. Fix the condition to check
both TIF_32BIT_{REGS, ADDR} for the N32 AUDIT flag.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: http://patchwork.linux-mips.org/patch/7480/
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: James Hogan <james.hogan@imgtec.com>
In preemptible kernel, only TIF_USEDFPU flag is reliable to distinguish
whether _init_fpu()/_restore_fp() is needed. Because the value of the
CP0_Status.CU1 isn't changed during preemption.
V2: Fix coding style.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/7515/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Need to initialize the mask to 0 on init, otherwise it
keeps increasing.
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=82581
v2: also fix cu count
v3: split count fix into separate patch
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: stable@vger.kernel.org
The original code allocated new chunks by the number of the writable devices
and missing devices to make sure that any RAID levels on a degraded FS continue
to be honored, but it introduced a problem that it stopped us to allocating
new chunks, the steps to reproduce is following:
# mkfs.btrfs -m raid1 -d raid1 -f <dev0> <dev1>
# mkfs.btrfs -f <dev1> //Removing <dev1> from the original fs
# mount -o degraded <dev0> <mnt>
# dd if=/dev/null of=<mnt>/tmpfile bs=1M
It is because we allocate new chunks only on the writable devices, if we take
the number of missing devices into account, and want to allocate new chunks
with higher RAID level, we will fail becaue we don't have enough writable
device. Fix it by ignoring the number of missing devices when allocating
new chunks.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
total_bytes of device is just a in-memory variant which is used to record
the size of the device, and it might be changed before we resize a device,
if the resize operation fails, it will be fallbacked. But some code used it
to update on-disk metadata of the device, it would cause the problem that
on-disk metadata of the devices was not consistent. We should use the other
variant named disk_total_bytes to update the on-disk metadata of device,
because that variant is updated only when the resize operation is successful.
Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We should not write data into a readonly device especially seed device when
doing scrub, skip those devices.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The seed filesystem was destroyed by the device replace, the reproduce
method is:
# mkfs.btrfs -f <dev0>
# btrfstune -S 1 <dev0>
# mount <dev0> <mnt>
# btrfs device add <dev1> <mnt>
# umount <mnt>
# mount <dev1> <mnt>
# btrfs replace start -f <dev0> <dev2> <mnt>
# umount <mnt>
# mount <dev0> <mnt>
It is because we erase the super block on the seed device. It is wrong,
we should not change anything on the seed device.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
When page aligned start and len passed to extent_fiemap(), the result is
good, but when start and len is not aligned, e.g. start = 1 and len =
4095 is passed to extent_fiemap(), it returns no extent.
The problem is that start and len is all rounded down which causes the
problem. This patch will round down start and round up (start + len) to
return right extent.
Reported-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_next_leaf() will use current leaf's last key to search
and then return a bigger one. So it may still return a file extent
item that is smaller than expected value and we will
get an overflow here for @em->len.
This is easy to reproduce for Btrfs Direct writting, it did not
cause any problem, because writting will re-insert right mapping later.
However, by hacking code to make DIO support compression, wrong extent
mapping is kept and it encounter merging failure(EEXIST) quickly.
Fix this problem by looping to find next file extent item that is bigger
than @start or we could not find anything more.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Sebastian Andrzej Siewior