Once the JITed images for each function in a multi-function program
are generated after the first three JIT passes, we only need to fix
the target address for the branch instruction corresponding to each
bpf-to-bpf function call.
This introduces the following optimizations for reducing the work
done by the JIT compiler when handling multi-function programs:
[1] Instead of doing two extra passes to fix the bpf function calls,
do just one as that would be sufficient.
[2] During the extra pass, only overwrite the instruction sequences
for the bpf-to-bpf function calls as everything else would still
remain exactly the same. This also reduces the number of writes
to the JITed image.
[3] Do not regenerate the prologue and the epilogue during the extra
pass as that would be redundant.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently __set_phy_supported allows to add modes w/o checking whether
the PHY supports them. This is wrong, it should never add modes but
only remove modes we don't want to support.
The commit marked as fixed didn't do anything wrong, it just copied
existing functionality to the helper which is being fixed now.
Fixes: f3a6bd393c ("phylib: Add phy_set_max_speed helper")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
please pull the following for 4.20:
- Stefan fixes the polariy of the Wi-Fi reset GPIOs signals which would
break on Raspberry Pi 3B and 3B+
-----BEGIN PGP SIGNATURE-----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=iFMZ
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.20/devicetree-fixes' of https://github.com/Broadcom/stblinux into fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes,
please pull the following for 4.20:
- Stefan fixes the polariy of the Wi-Fi reset GPIOs signals which would
break on Raspberry Pi 3B and 3B+
* tag 'arm-soc/for-4.20/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
Signed-off-by: Olof Johansson <olof@lixom.net>
There's a bug in dtc in checking for duplicate node names when there's
another section (e.g. "/ { };"). In this case, skeleton.dtsi provides
another section. Upon removal of skeleton.dtsi, the dtb fails to build
due to a duplicate node 'fixedregulator@0'. As both nodes were pretty
much the same 3.3V fixed regulator, it hasn't really mattered. Fix this
by renaming the nodes to something unique. In the process, drop the
unit-address which shouldn't be present wtihout reg property.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Move Eric Miao and Haojian Zhuang over to CREDITS, since they're AWOL
for some time already. The git trees have gone away too.
I'm adding myself as a reviewer. I'd like to be Cc'd on patches and will
be able to test them, but I don't possess a data sheet thus there might
be things I'll be unable to review. Hence the Odd-Fixes status.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
cpu_is_mmp2() was equivalent to cpu_is_pj4(), wouldn't be correct for
multiplatform kernels. Fix it by also considering mmp_chip_id, as is
done for cpu_is_pxa168() and cpu_is_pxa910() above.
Moreover, it is only available with CONFIG_CPU_MMP2 and thus doesn't work
on DT-based MMP2 machines. Enable it on CONFIG_MACH_MMP2_DT too.
Note: CONFIG_CPU_MMP2 is only used for machines that use board files
instead of DT. It should perhaps be renamed. I'm not doing it now, because
I don't have a better idea.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- kernelci awaits a working stdout-path.
Fix the path for reference board and bananapi-r64
- general propouse timer has issues with clocks that didn't
get probed early. Delete the DT node as the timer isn't
need, a ARM arch timer exists on the system.
-----BEGIN PGP SIGNATURE-----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=9YyV
-----END PGP SIGNATURE-----
Merge tag 'v4.19-next-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into fixes
DT mt7622:
- Kernelci awaits a working stdout-path.
Fix the path for reference board and bananapi-r64
- General propouse timer has issues with clocks that didn't
get probed early. Delete the DT node as the timer isn't
need, a ARM arch timer exists on the system.
* tag 'v4.19-next-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: mt7622: Drop the general purpose timer node
arm64: dts: mt7622: fix no more console output on BPI-R64 board
arm64: dts: mt7622: fix no more console output on rfb1
Signed-off-by: Olof Johansson <olof@lixom.net>
Add IRC channel and URL of the wiki.
Also add soc drivers folder and regex to catch more
mediatek components.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
These devices support read zero after trim (RZAT), as they advertise to
the OS. However, the OS doesn't believe the SSDs unless they are
explicitly whitelisted.
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The commit b1b8f45b31 ("ARM: dts: bcm2837: Add missing GPIOs of Expander")
introduced a wifi power sequence. Unfortunately the polarity of the reset
GPIOs were wrong and broke the wifi support on Raspberry Pi 3 B and
later in 3 B+. This wasn't discovered before since the power sequence
takes only effect in case the relevant MMC driver is compiled as a module.
Fixes: b1b8f45b31 ("ARM: dts: bcm2837: Add missing GPIOs of Expander")
Cc: stable@vger.kernel.org
Reported-by: Matthias Lueschner <lueschem@gmail.com>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=911443
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
I noticed that the Android v3.0.8 kernel on droid4 is using different
keypad values from the mainline kernel and does not have issues with
keys occasionally being stuck until pressed again. Turns out there was
an earlier patch posted to fix this as "Input: omap-keypad: errata i689:
Correct debounce time", but it was never reposted to fix use macros
for timing calculations.
This updated version is using macros, and also fixes the use of the
input clock rate to use 32768KiHz instead of 32000KiHz. And we want to
use the known good Android kernel values of 3 and 6 instead of 2 and 6
in the earlier patch.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
SMBus works fine for the touchpad with id SYN3221, used in the HP 15-ay000
series,
This device has been reported in these messages in the "linux-input"
mailing list:
* https://marc.info/?l=linux-input&m=152016683003369&w=2
* https://www.spinics.net/lists/linux-input/msg52525.html
Reported-by: Nitesh Debnath <niteshkd1999@gmail.com>
Reported-by: Teika Kazura <teika@gmx.com>
Signed-off-by: Teika Kazura <teika@gmx.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Noticed the other day the trackpoint felt different on my P50, then
realized it was because rmi4 wasn't loading for this machine
automatically. Suspend/resume, hibernate, and everything else seem to
work perfectly fine on here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo
IdeaPad 330-15ARR.
Signed-off-by: Noah Westervelt <nwestervelt@outlook.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Added the ability to detect the ELAN0621 touchpad found in some Lenovo
laptops.
Signed-off-by: Adam Wong <adam@adamwong.me>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=44JZ
-----END PGP SIGNATURE-----
Merge tag 'media/v4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- Revert a dt-bindings patch whose driver didn't make for 4.20
- fix a kernel oops at vicodec driver
- fix a frame overflow at gspca with was causing regressions on some
cameras, making them to not work
- use the proper type for wait_queue head
- make media request API compatible with 32-bit userspace on 64-bit
kernel
- fix a regression on Kernel 4.19 at dvb-pll
- don't use SPDX headers yet for GFDL
* tag 'media/v4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediactl docs: Fix licensing message
media: dvb-pll: don't re-validate tuner frequencies
media: dvb-pll: fix tuner frequency ranges
media: Revert "media: dt-bindings: Document the Rockchip VPU bindings"
media: gspca: fix frame overflow error
media: vicodec: fix memchr() kernel oops
media: cedrus: add action item to the TODO
media: media-request: Add compat ioctl
media: Use wait_queue_head_t for media_request
The > comparison should be >= to prevent reading beyond the end of the
clock[] array.
(The clock[] array is allocated in zynqmp_clk_setup() and has
clock_max_idx elements.)
Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The > comparison should be >= or we write one element beyond the end of
the unit->clk_table[] array.
(The unit->clk_table[] array is allocated in the mmp_clk_init() function
and it has unit->nr_clks elements).
Fixes: 4661fda10f ("clk: mmp: add basic support functions for DT support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
These > comparisons should be >= to prevent reading beyond the end of
of the clk_data->hws[] buffer.
The clk_data->hws[] array is allocated in cp110_syscon_common_probe()
when we do:
cp110_clk_data = devm_kzalloc(dev, sizeof(*cp110_clk_data) +
sizeof(struct clk_hw *) * CP110_CLK_NUM,
GFP_KERNEL);
As you can see, it has CP110_CLK_NUM elements which is equivalent to
CP110_MAX_CORE_CLOCKS + CP110_MAX_GATABLE_CLOCKS.
Fixes: d3da3eaef7 ("clk: mvebu: new driver for Armada CP110 system controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull IDE fixes from David Miller:
"A missing of_node_put() and a small cleanup"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
ide: Change to use DEFINE_SHOW_ATTRIBUTE macro
ide: pmac: add of_node_put()
Pull sparc fixes from David Miller:
1) Some implicit switch fallthrough fixes from Stephen Rothwell.
2) Missing of_node_put() in various sparc drivers from Yangtao Li.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
drivers/tty: add missing of_node_put()
drivers/sbus/char: add of_node_put()
sbus: char: add of_node_put()
sparc32: supress another implicit-fallthrough warning
sparc32: suppress an implicit-fallthrough warning
sparc: suppress the implicit-fallthrough warning
arch/sparc: Use kzalloc_node
For some case, no need to force SoftMin/Max settings for all DPMs.
It's OK to force on some specific DPM only.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For display config change event only, pre-display config settings are
needed.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New pptable upload through sysfs interface is supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some power features rely on the driver loaded version so always
load the MC firmware from the driver even if the vbios loaded
a version already.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Some variants require different MC firmware images.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If a USB sound card reports 0 interfaces, an error condition is triggered
and the function usb_audio_probe errors out. In the error path, there was a
use-after-free vulnerability where the memory object of the card was first
freed, followed by a decrement of the number of active chips. Moving the
decrement above the atomic_dec fixes the UAF.
[ The original problem was introduced in 3.1 kernel, while it was
developed in a different form. The Fixes tag below indicates the
original commit but it doesn't mean that the patch is applicable
cleanly. -- tiwai ]
Fixes: 362e4e49ab ("ALSA: usb-audio - clear chip->probing on error exit")
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Mathias Payer <mathias.payer@nebelwelt.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some new variants require updated firmware.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The error checks on ret for a negative error return always fails because
the return value of iommu_map_sg() is unsigned and can never be negative.
Detected with Coccinelle:
drivers/gpu/drm/msm/msm_iommu.c:69:9-12: WARNING: Unsigned expression
compared with zero: ret < 0
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
CC: Rob Clark <robdclark@gmail.com>
CC: David Airlie <airlied@linux.ie>
CC: Julia Lawall <julia.lawall@lip6.fr>
CC: linux-arm-msm@vger.kernel.org
CC: dri-devel@lists.freedesktop.org
CC: freedreno@lists.freedesktop.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Alpha enable in the pixel format will help in
selecting the blend rule. By keeping alpha enable
to true we are allowing foreground alpha to blend
with the layer. If alpha is don't care, then we
should not allow pixel alpha to be part of blend
equation.
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
'dpu_enc' is a member of 'drm_enc'
And 'drm_enc' got allocated with devm_kzalloc in dpu_encoder_init.
This gives this error message:
./drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:459:1-6:
WARNING: invalid free of devm_ allocated data
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
There is no need to have the 'struct hdmi_platform_config *hdmi_cfg'
variable static since new value always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
If dma_fence_wait fails to wait for a supplied in-fence in
msm_ioctl_gem_submit, make sure we release that in-fence.
Also remove this dma_fence_put() from the 'out' label.
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
It causes a WARN in drm_atomic_get_plane_state(), and is not used by
atomic (or dpu).
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
If a command buffer doesn't have any relocs assigned to it there then
is no need to map it in the kernel address space.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
SoCs that contain MDP5 have a top level wrapper called MDSS that
manages locks, power and irq for the sub-blocks within it.
Irq for HDMI is also routed through the MDSS.
Shortly after the Hot Plug Detection (HPD) is enabled in HDMI,
HDMI interrupts are recieved by the MDSS interrupt handler.
However at this moment the HDMI irq is still not mapped to
the MDSS irq domain so the HDMI irq handler cannot be called
to process the interrupts.
This leads to a flood of HDMI interrupts on CPU 0.
If we are lucky to have the HDMI initialization running on a
different CPU, it will eventually map the HDMI irq to MDSS irq
domain, the next HDMI interrupt will be handled by the HDMI irq
handler, the interrupt flood will stop and we will recover.
If the HDMI initialization is running on CPU 0, then it cannot
complete and there is nothing to stop the interrupt flood on
CPU 0. The system is stuck.
Fix this by moving the HPD enablement after the HDMI irq is
mapped to the MDSS irq domain.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
While creating display and event threads per crtc, validate
them before setting their priorities.
changes in v2:
- use dev_warn (Abhinav Kumar)
changes in v3:
- fix compilation error
changes in v4:
- Remove Change-Id (Sean Paul)
- Keep logging within 80 char limit (Sean Paul)
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
The DSI encoder sets dssdev->ops->dsi.set_config, which is stored at the
same offset as dssdev->ops->hdmi.set_hdmi_mode. The code in omap_encoder
only checks if dssdev->ops->hdmi.set_hdmi_mode is NULL. Due to the way
union works, it won't be NULL if dsi.set_config is set. This means
dsi_set_config will be called with config=hdmi_mode=false=NULL parameter
resulting in a NULL dereference. Also the dereference happens while
console is locked, so kernel hangs without any debug output without
"fb.lockless_register_fb=1" parameter.
This restructures the code, so that the HDMI mode is only configured
for HDMI output types.
Fixes: 83910ad3f5 ("drm/omap: Move most omap_dss_driver operations to omap_dss_device_ops")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Tony Lindgren <tony@atomide.com>
[tomi.valkeinen@ti.com: dropped the safeguard]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121160916.22017-5-sebastian.reichel@collabora.com
After the changes from 4.20 the DSI encoder tries to find the
attached panel before populating the DSI bus. If the panel is
not found -EPROBE_DEFER is returned, so the DSI bus is never
populated and the panel never added.
Fix this by populating the DSI bus before searching for the
video sink in dsi_init_output().
Fixes: 27d624527d ("drm/omap: dss: Acquire next dssdev at probe time")
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121160916.22017-3-sebastian.reichel@collabora.com
panel-dpi used to convey the bus-flags via the videomode, but recent
changes changed the use of videomode to DRM's drm_display_mode which
does not contain bus-flags. This broke panel-dpi, which didn't
explicitly store the bus-flags into dssdev->bus_flags.
Fix this by setting dssdev->bus_flags. Also change the bus_flags type to
u32, as that is the type used in the DRM framework, and we would get a
warning with drm_bus_flags_from_videomode() otherwise.
Fixes: 3fbda31e81 ("drm/omap: Split mode fixup and mode set from encoder enable")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181126092447.11864-1-tomi.valkeinen@ti.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Gunnar Krueger reported a systemd-boot failure and bisected it down to:
e6e094e053 ("x86/acpi, x86/boot: Take RSDP address from boot params if available")
In case a broken boot loader doesn't clear its 'struct boot_params', clear
rsdp_addr in sanitize_boot_params().
Reported-by: Gunnar Krueger <taijian@posteo.de>
Tested-by: Gunnar Krueger <taijian@posteo.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: sstabellini@kernel.org
Fixes: e6e094e053 ("x86/acpi, x86/boot: Take RSDP address from boot params if available")
Link: http://lkml.kernel.org/r/20181203103811.17056-1-jgross@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We've got a regression report for some Thinkpad models (at least
T570s) which shows the too low speaker output volume. The bisection
leaded to the commit 61fcf8ece9 ("ALSA: hda/realtek - Enable Thinkpad
Dock device for ALC298 platform"), and it's basically adding the two
pin configurations for the dock, and looks harmless.
The real culprit seems, though, that the DAC assignment for the
speaker pin is implicitly assumed on these devices, i.e. pin NID 0x14
to be coupled with DAC NID 0x03. When more pins are configured by the
commit above, the auto-parser changes the DAC assignment, and this
resulted in the regression.
As a workaround, just provide the fixed pin / DAC mapping table for
this Thinkpad fixup function. It's no generic solution, but the
problem itself is pretty much device-specific, so must be good
enough.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1554304
Fixes: 61fcf8ece9 ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform")
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
vmbus_process_offer() mustn't call channel->sc_creation_callback()
directly for sub-channels, because sc_creation_callback() ->
vmbus_open() may never get the host's response to the
OPEN_CHANNEL message (the host may rescind a channel at any time,
e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind()
may not wake up the vmbus_open() as it's blocked due to a non-zero
vmbus_connection.offer_in_progress, and finally we have a deadlock.
The above is also true for primary channels, if the related device
drivers use sync probing mode by default.
And, usually the handling of primary channels and sub-channels can
depend on each other, so we should offload them to different
workqueues to avoid possible deadlock, e.g. in sync-probing mode,
NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() ->
rtnl_lock(), and causes deadlock: the former gets the rtnl_lock
and waits for all the sub-channels to appear, but the latter
can't get the rtnl_lock and this blocks the handling of sub-channels.
The patch can fix the multiple-NIC deadlock described above for
v3.x kernels (e.g. RHEL 7.x) which don't support async-probing
of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing
but don't enable async-probing for Hyper-V drivers (yet).
The patch can also fix the hang issue in sub-channel's handling described
above for all versions of kernels, including v4.19 and v4.20-rc4.
So actually the patch should be applied to all the existing kernels,
not only the kernels that have 8195b1396e.
Fixes: 8195b1396e ("hv_netvsc: fix deadlock on hotplug")
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place is not doing this, so fix it.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sandipan Das