Commit 67fbcd62f5 ("tools/kvm_stat: add '-f help' to get the available
event list") added support for '-f help'. However, the extra handling of
'help' will also take effect when 'help' is specified as a regex in
interactive mode via 'f'. This results in display of all events while
only those matching this regex should be shown.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When updating the fields filter, tracepoint events of fields previously
not visible were not enabled, as TracepointProvider.update_fields()
updated the member variable directly instead of using the setter, which
triggers the event enable/disable.
To reproduce, run 'kvm_stat -f kvm_exit', press 'c' to remove the
filter, and notice that no add'l fields that do not match the regex
'kvm_exit' will appear.
This issue was introduced by commit c469117df0 ("tools/kvm_stat:
simplify initializers").
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When displaying debugfs events listed by guests, an attempt to switch to
reporting of stats for individual child trace events results in garbled
output. Reason is that when toggling drilldown, the update of the stats
doesn't honor when events are displayed by guests, as indicated by
Tui._display_guests.
To reproduce, run 'kvm_stat -d' and press 'b' followed by 'x'.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Specifying a guest via '-g foo' always results in an error:
$ kvm_stat -g foo
Usage: kvm_stat [options]
kvm_stat: error: Error while searching for guest "foo", use "-p" to
specify a pid instead
Reason is that Tui.get_pid_from_gname() is not static, as it is supposed
to be.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Common:
- Python 3 support in kvm_stat
- Accounting of slabs to kmemcg
ARM:
- Optimized arch timer handling for KVM/ARM
- Improvements to the VGIC ITS code and introduction of an ITS reset
ioctl
- Unification of the 32-bit fault injection logic
- More exact external abort matching logic
PPC:
- Support for running hashed page table (HPT) MMU mode on a host that
is using the radix MMU mode; single threaded mode on POWER 9 is
added as a pre-requisite
- Resolution of merge conflicts with the last second 4.14 HPT fixes
- Fixes and cleanups
s390:
- Some initial preparation patches for exitless interrupts and crypto
- New capability for AIS migration
- Fixes
x86:
- Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs, and
after-reset state
- Refined dependencies for VMX features
- Fixes for nested SMI injection
- A lot of cleanups
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJaDayXAAoJEED/6hsPKofo/3UH/3HvlcHt+ADTkCU1/iiKAs+i
0zngIOXIxgHDnV0ww6bV+Znww0BzTYgKCAXX76z603jdpDwG/pzQQcbLDF5ZoJnD
sQtF10gZinWaRsHlfbLqjrHGL2pGDHO1UKBKLJ0bAIyORPZBxs7i+VmrY/blnr9c
0wsybJ8RbvwAxjsDL5jeX/z4NehPupmKUc4Lf0eZdSHwVOf9sjn+MP6jJ0r2JcIb
D+zddPBiLStzN97t4gZpQsrlj3LKrDS+6hY+1TjSvlh+yHKFVFh58VhLm4DuDeb5
bYOAlWJ/gAWEzfvr5Ld+Nd7SqWWn/14logPkQ4gcU4BI/neAOzk4c6hJfCHl1nk=
=593n
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"First batch of KVM changes for 4.15
Common:
- Python 3 support in kvm_stat
- Accounting of slabs to kmemcg
ARM:
- Optimized arch timer handling for KVM/ARM
- Improvements to the VGIC ITS code and introduction of an ITS reset
ioctl
- Unification of the 32-bit fault injection logic
- More exact external abort matching logic
PPC:
- Support for running hashed page table (HPT) MMU mode on a host that
is using the radix MMU mode; single threaded mode on POWER 9 is
added as a pre-requisite
- Resolution of merge conflicts with the last second 4.14 HPT fixes
- Fixes and cleanups
s390:
- Some initial preparation patches for exitless interrupts and crypto
- New capability for AIS migration
- Fixes
x86:
- Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs,
and after-reset state
- Refined dependencies for VMX features
- Fixes for nested SMI injection
- A lot of cleanups"
* tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits)
KVM: s390: provide a capability for AIS state migration
KVM: s390: clear_io_irq() requests are not expected for adapter interrupts
KVM: s390: abstract conversion between isc and enum irq_types
KVM: s390: vsie: use common code functions for pinning
KVM: s390: SIE considerations for AP Queue virtualization
KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup
KVM: PPC: Book3S HV: Cosmetic post-merge cleanups
KVM: arm/arm64: fix the incompatible matching for external abort
KVM: arm/arm64: Unify 32bit fault injection
KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET
KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET
KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared
KVM: arm/arm64: vgic-its: New helper functions to free the caches
KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device
arm/arm64: KVM: Load the timer state when enabling the timer
KVM: arm/arm64: Rework kvm_timer_should_fire
KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate
KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit
KVM: arm/arm64: Move phys_timer_emulate function
KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make kvm_stat support Python 3 by changing the use of "print" to a
function rather than a statement, switching from "iteritems" and
"iterkeys" (removed in Python 3) to "items" and "keys" respectively,
and decoding bytes to strings when dealing with text.
With this change, kvm_stat is usable with Python 2.6 and greater.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Using variables instead of hard paths makes the requirements information
more accurate.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Toggle display total number of events by guest (debugfs only).
When switching to display of events by guest, field filters remain
active. I.e. the number of events per guest reported considers only
events matching the filters. Likewise with pid/guest filtering.
Note that when switching to display of events by guest, DebugfsProvider
remains to collect data for events as it did before, but the read()
method summarizes the values by pid.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It might be handy to display the full history of event stats to compare
the current event distribution against any available historic data.
Since we have that available for debugfs, we offer a respective command
line option to display what's available.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix an instance where print_all_gnames() is called without the mandatory
argument, resulting in a stack trace.
To reproduce, simply press 'g' in interactive mode.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Display a (possibly inaccurate) list of all running guests. Note that we
leave a bit of extra room above the list for potential error messages.
Furthermore, we deliberately do not reject pids or guest names that are
not in our list, as we cannot rule out that our fuzzy approach might be
in error somehow.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new interactive command 'o' to toggle sorting by 'CurAvg/s' (default)
and 'Total' columns.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new command 's' to modify the update interval. Limited to a maximum of
25.5 sec and a minimum of 0.1 sec, since curses cannot handle longer
and shorter delays respectively.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Display interactive commands reference on 'h'.
While at it, sort interactive commands alphabetically in various places.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'Current' can be misleading as it doesn't tell whether this is the amount
of events in the last interval or the current average per second.
Note that this necessitates widening the respective column by one more
character.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Print header in standout font just like the 'top' command does.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Give users some indication on the reason why no data is displayed on the
screen yet.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Show the cursor in the interactive screens to specify pid, filter or guest
name as an orientation for the user.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Quite a few of the functions are used only in a single class. Moving
functions accordingly to improve the overall structure.
Furthermore, introduce a base class for the providers, which might also
come handy for future extensions.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify a couple of initialization routines:
* TracepointProvider and DebugfsProvider: Pass pid into __init__() instead
of switching to the requested value in an extra call after initializing
to the default first.
* Pass a single options object into Stats.__init__(), delaying options
evaluation accordingly, instead of evaluating options first and passing
several parts of the options object to Stats.__init__() individually.
* Eliminate Stats.update_provider_pid(), since this 2-line function is now
used in a single place only.
* Remove extra call to update_drilldown() in Tui.__init__() by getting the
value of options.fields right initially when parsing options.
* Simplify get_providers() logic.
* Avoid duplicate fields initialization by handling it once in the
providers' __init__() methods.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Function available_fields() is not used in any place.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify line print logic for header and data lines in interactive mode
as previously suggested by Radim.
While at it, add a space between the first two columns to avoid the
total bleeding into the event name.
Furthermore, for column 'Current', differentiate between no events being
reported (empty 'Current' column) vs the case where events were reported
but the average was rounded down to zero ('0' in 'Current column), for
the folks who appreciate the difference.
Finally: Only skip events which were not reported at all yet, instead of
events that don't have a value in the current interval.
Considered using constants for the field widths in the format strings.
However, that would make things a bit more complicated, and considering
that there are only two places where output happens, I figured it isn't
worth the trouble.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Certain interactive commands will not modify any information displayed in
the header, hence we can skip them.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should not use the initial sleeptime for any key press that does not
switch to a different screen, as that introduces an unaesthetic flicker due
to two updates in quick succession.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When an update interval is interrupted via key press (e.g. space), the
'Current' column value is calculated using the full interval length
instead of the elapsed time, which leads to lower than actual numbers.
Furthermore, the value should be rounded, not truncated.
This is fixed by using the actual elapsed time for the calculation.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add column '%Total' next to 'Total' for easier comparison of numbers between
hosts.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Provide an interactive command to reset the tracepoint statistics.
Requires some extra work for debugfs, as the counters cannot be reset.
On the up side, this offers us the opportunity to have debugfs values
reset on startup and whenever a filter is modified, becoming consistent
with the tracepoint provider. As a bonus, 'kvmstat -dt' will now provide
useful output, instead of mixing values in totally different orders of
magnitude.
Furthermore, we avoid unnecessary resets when any of the filters is
"changed" interactively to the previous value.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Provide a real simple way to erase any active filter.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Add a new option '-g'/'--guest' to select a particular process by providing
the QEMU guest name.
Notes:
- The logic to figure out the pid corresponding to the guest name might look
scary, but works pretty reliably in practice; in the unlikely event that it
returns add'l flukes, it will bail out and hint at using '-p' instead, no
harm done.
- Mixing '-g' and '-p' is possible, and the final instance specified on the
command line is the significant one. This is consistent with current
behavior for '-p' which, if specified multiple times, also regards the final
instance as the significant one.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Behavior on empty/0 input for regex and pid filtering was inconsistent, as
the former would keep the current filter, while the latter would (naturally)
remove any pid filtering.
Make things consistent by falling back to the default filter on empty input
for the regex filter dialogue.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
If a user defines a regex filter through the interactive command, display
the active regex in the header's second line.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Print helpful messages in case users enter invalid input or invalid pids in
the interactive pid filter dialogue.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Improve consistency in the interactive dialogue for pid filtering by
removing any filters on empty input (in addition to entering 0).
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
When running kvm_stat with option '-p' to filter per process, display
the QEMU guest name next to the pid, if available.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-By: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Apart from the source code, there does not seem to be a place that documents
the interactive capabilities of kvm_stat yet.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Whenever a user adds a filter, we
* redraw the header immediately for a snappy response
* print a message indicating to the user that we're busy while the
noticeable delay induced by updating all of the stats objects takes place
* update the statistics ASAP (i.e. after 0.25s instead of 3s) to be
consistent with behavior on startup
To do so, we split the Tui's refresh() method to allow for drawing header
and stats separately, and trigger a header refresh whenever we are about
to do something that takes a while - like updating filters.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Provides all missing empty lines as required for full PEP compliance.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Updating the fields of the TracepointProvider does not propagate changes to the
tracepoints. This shows when a pid filter is enabled, whereby subsequent
extensions of the fields of the Tracepoint provider (e.g. by toggling
drilldown) will not modify the tracepoints as required.
To reproduce, select a specific process via interactive command 'p', and
enable drilldown via 'x' - none of the fields with the braces will appear
although they should.
The fix will always leave all available fields in the TracepointProvider
enabled.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Based-on-text-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Addresses
- eliminate extra import
- missing variable initialization
- type redefinition from int to float
- passing of int type argument instead of string
- a couple of PEP8-reported indentation/formatting glitches
- remove unused variable drilldown in class Tui
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
SIGINT causes ugly unhandled exceptions in log and batch mode, which we
prevent by catching the exceptions accordingly.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The previous version was catching all exceptions, including SIGINT.
We only want to catch the curses exceptions here.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
When running kvm_stat in interactive mode, the cursor appears at the lower
left corner, which looks a bit distracting.
This patch hides the cursor by turning it invisible.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
A lot of the code works with the perf events about which only sparse
documentation was available until 2012. Having that information now,
we can clarify what is done in the code.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Having stats for single VMs can help to determine the problem of a VM
without the need of running other tools like perf.
The tracepoints already allowed pid level monitoring, but kvm_stat
didn't have support for it till now. Support for the newly implemented
debugfs vm monitoring was also implemented.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_stat script is failing to execute on powerpc :
# ./kvm_stat
Traceback (most recent call last):
File "./kvm_stat", line 825, in <module>
main()
File "./kvm_stat", line 813, in main
providers = get_providers(options)
File "./kvm_stat", line 778, in get_providers
providers.append(TracepointProvider())
File "./kvm_stat", line 416, in __init__
self.filters = get_filters()
File "./kvm_stat", line 315, in get_filters
if ARCH.exit_reasons:
AttributeError: 'ArchPPC' object has no attribute 'exit_reasons'
This is because, its trying to access a non-defined attribute.
Also, the IOCTL number of RESET is incorrect for powerpc. The correct
number has been added.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Converted from the Texinfo source in QEMU to asciidoc. The a2x
incantation was provided by Janosch Frank.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Raspl