Patch series "enable movable nodes on non-x86 configs", v7.
This patchset allows more configs to make use of movable nodes. When
CONFIG_MOVABLE_NODE is selected, there are two ways to introduce such
nodes into the system:
1. Discover movable nodes at boot. Currently this is only possible on
x86, but we will enable configs supporting fdt to do the same.
2. Hotplug and online all of a node's memory using online_movable. This
is already possible on any config supporting memory hotplug, not
just x86, but the Kconfig doesn't say so. We will fix that.
We'll also remove some cruft on power which would prevent (2).
This patch (of 5):
Remove the check which prevents us from hotplugging into an empty node.
The original commit b226e46212 ("[PATCH] powerpc: don't add memory to
empty node/zone"), states that this was intended to be a temporary measure.
It is a workaround for an oops which no longer occurs.
Link: http://lkml.kernel.org/r/1479160961-25840-2-git-send-email-arbab@linux.vnet.ibm.com
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alistair Popple <apopple@au1.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8xx uses a two level page table with two different linux page size
support (4k and 16k). 8xx also support two different hugepage sizes
512k and 8M. In order to support them on linux we define two different
page table layout.
The size of pages is in the PGD entry, using PS field (bits 28-29):
00 : Small pages (4k or 16k)
01 : 512k pages
10 : reserved
11 : 8M pages
For 512K hugepage size a pgd entry have the below format
[<hugepte address >0101] . The hugepte table allocated will contain 8
entries pointing to 512K huge pte in 4k pages mode and 64 entries in
16k pages mode.
For 8M in 16k mode, a pgd entry have the below format
[<hugepte address >1101] . The hugepte table allocated will contain 8
entries pointing to 8M huge pte.
For 8M in 4k mode, multiple pgd entries point to the same hugepte
address and pgd entry will have the below format
[<hugepte address>1101]. The hugepte table allocated will only have one
entry.
For the time being, we do not support CPU15 ERRATA when HUGETLB is
selected
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> (v3, for the generic bits)
Signed-off-by: Scott Wood <oss@buserror.net>
Today there are two implementations of hugetlbpages which are managed
by exclusive #ifdefs:
* FSL_BOOKE: several directory entries points to the same single hugepage
* BOOK3S: one upper level directory entry points to a table of hugepages
In preparation of implementation of hugepage support on the 8xx, we
need a mix of the two above solutions, because the 8xx needs both cases
depending on the size of pages:
* In 4k page size mode, each PGD entry covers a 4M bytes area. It means
that 2 PGD entries will be necessary to cover an 8M hugepage while a
single PGD entry will cover 8x 512k hugepages.
* In 16 page size mode, each PGD entry covers a 64M bytes area. It means
that 8x 8M hugepages will be covered by one PGD entry and 64x 512k
hugepages will be covers by one PGD entry.
This patch:
* removes #ifdefs in favor of if/else based on the range sizes
* merges the two huge_pte_alloc() functions as they are pretty similar
* merges the two hugetlbpage_init() functions as they are pretty similar
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> (v3)
Signed-off-by: Scott Wood <oss@buserror.net>
Today powerpc64 uses a set of pgtable_caches while powerpc32 uses
standard pages when using 4k pages and a single pgtable_cache
if using other size pages.
In preparation of implementing huge pages on the 8xx, this patch
replaces the specific powerpc32 handling by the 64 bits approach.
This is done by:
* moving 64 bits pgtable_cache_add() and pgtable_cache_init()
in a new file called init-common.c
* modifying pgtable_cache_init() to also handle the case
without PMD
* removing the 32 bits version of pgtable_cache_add() and
pgtable_cache_init()
* copying related header contents from 64 bits into both the
book3s/32 and nohash/32 header files
On the 8xx, the following cache sizes will be used:
* 4k pages mode:
- PGT_CACHE(10) for PGD
- PGT_CACHE(3) for 512k hugepage tables
* 16k pages mode:
- PGT_CACHE(6) for PGD
- PGT_CACHE(7) for 512k hugepage tables
- PGT_CACHE(3) for 8M hugepage tables
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Scott Wood <oss@buserror.net>
At the moment the userspace tool is expected to request pinning of
the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present.
When the userspace process finishes, all the pinned pages need to
be put; this is done as a part of the userspace memory context (MM)
destruction which happens on the very last mmdrop().
This approach has a problem that a MM of the userspace process
may live longer than the userspace process itself as kernel threads
use userspace process MMs which was runnning on a CPU where
the kernel thread was scheduled to. If this happened, the MM remains
referenced until this exact kernel thread wakes up again
and releases the very last reference to the MM, on an idle system this
can take even hours.
This moves preregistered regions tracking from MM to VFIO; insteads of
using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is
added so each container releases regions which it has pre-registered.
This changes the userspace interface to return EBUSY if a memory
region is already registered in a container. However it should not
have any practical effect as the only userspace tool available now
does register memory region once per container anyway.
As tce_iommu_register_pages/tce_iommu_unregister_pages are called
under container->lock, this does not need additional locking.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This changes mm_iommu_xxx helpers to take mm_struct as a parameter
instead of getting it from @current which in some situations may
not have a valid reference to mm.
This changes helpers to receive @mm and moves all references to @current
to the caller, including checks for !current and !current->mm;
checks in mm_iommu_preregistered() are removed as there is no caller
yet.
This moves the mm_iommu_adjust_locked_vm() call to the caller as
it receives mm_iommu_table_group_mem_t but it needs mm.
This should cause no behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We are going to get rid of @current references in mmu_context_boos3s64.c
and cache mm_struct in the VFIO container. Since mm_context_t does not
have reference counting, we will be using mm_struct which does have
the reference counter.
This changes mm_iommu_init/mm_iommu_cleanup to receive mm_struct rather
than mm_context_t (which is embedded into mm).
This should not cause any behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In the recent commit 1515ab9321 ("powerpc/mm: Dump hash table") we
added code to dump the hage page table. Currently this can be selected
to build on any platform. However it breaks the build if we're building
for a non-Book3S platform, because none of the hash page table related
defines and so on exist. So restrict it to building only on Book3S.
Similarly in commit 8eb07b1870 ("powerpc/mm: Dump linux pagetables")
we added code to dump the Linux page tables, which uses some constants
which are only defined on Book3S - so guard those with an #ifdef.
Fixes: 1515ab9321 ("powerpc/mm: Dump hash table")
Fixes: 8eb07b1870 ("powerpc/mm: Dump linux pagetables")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh/Ben reported that the change to do_page_fault() we made in commit
1d18ad0268 ("powerpc/mm: Detect instruction fetch denied and report")
needs to handle the case where CPU_FTR_COHERENT_ICACHE is missing but we
have CPU_FTR_NOEXECUTE. In those cases the check added for
SRR1_ISI_N_OR_G might trigger a false positive.
This patch adds a check for CPU_FTR_COHERENT_ICACHE in addition to the
MSR value.
Fixes: 1d18ad0268 ("powerpc/mm: Detect instruction fetch denied and report")
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On 64-bit CPUs with no-execute support and non-snooping icache, such as
970 or POWER4, we have a software mechanism to ensure coherency of the
cache (using exec faults when needed).
This was broken due to a logic error when the code was rewritten
from assembly to C, previously the assembly code did:
BEGIN_FTR_SECTION
mr r4,r30
mr r5,r7
bl hash_page_do_lazy_icache
END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
Which tests that:
(cpu_features & (NOEXECUTE | COHERENT_ICACHE)) == NOEXECUTE
Which says that the current cpu does have NOEXECUTE, but does not have
COHERENT_ICACHE.
Fixes: 91f1da9979 ("powerpc/mm: Convert 4k hash insert to C")
Fixes: 89ff725051 ("powerpc/mm: Convert __hash_page_64K to C")
Fixes: a43c0eb836 ("powerpc/mm: Convert 4k insert from asm to C")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Change log verbosification]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we are updating a pte, we just need to flush the tlb mapping
that pte. Right now we do a full mm flush because we don't track the page
size. Now that we have page size details in pte use that to do the
optimized flush
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that we have page size details encoded in pte using software pte
bits, use that to find the page size needed for tlb flush.
This function should only be used on P9 DD1, so give it a horrible name
to make that clear.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
ISA 3 defines new encoded access authority that allows instruction
access prevention in privileged mode and allows normal access
to problem state. This patch just enables IAMR (Instruction Authority
Mask Register), enabling AMR would require more work.
I've tested this with a buggy driver and a simple payload. The payload
is specific to the build I've tested.
mpe: Also tested with LKDTM:
# echo EXEC_USERSPACE > /sys/kernel/debug/provoke-crash/DIRECT
lkdtm: Performing direct entry EXEC_USERSPACE
lkdtm: attempting ok execution at c0000000005bf560
lkdtm: attempting bad execution at 00003fff8d940000
Unable to handle kernel paging request for instruction fetch
Faulting instruction address: 0x3fff8d940000
Oops: Kernel access of bad area, sig: 11 [#1]
NIP: 00003fff8d940000 LR: c0000000005bfa58 CTR: 00003fff8d940000
REGS: c0000000f1fcf900 TRAP: 0400 Not tainted (4.9.0-rc5-compiler_gcc-6.2.0-00109-g956dbc06232a)
MSR: 9000000010009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 48002222 XER: 00000000
...
Call Trace:
lkdtm_EXEC_USERSPACE+0x104/0x120 (unreliable)
lkdtm_do_action+0x3c/0x80
direct_entry+0x100/0x1b0
full_proxy_write+0x94/0x100
__vfs_write+0x3c/0x1b0
vfs_write+0xcc/0x230
SyS_write+0x60/0x110
system_call+0x38/0xfc
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
ISA 3 allows for prevention of instruction fetch and execution
of user mode pages. If such an error occurs, SRR1 bit 35 reports the
error. We catch and report the error in do_page_fault().
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Setup AMOR (Authority Mask Override Register) in HV mode so that the
host and guest kernel can in turn setup IAMR.
This allows us to enable key 0 in a following patch.
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With commit e58e87adc8 ("powerpc/mm: Update _PAGE_KERNEL_RO") we
started using the ppp value 0b110 to map kernel readonly. But that
facility was only added as part of ISA 2.04. For earlier ISA version
only supported ppp bit value for readonly mapping is 0b011. (This
implies both user and kernel get mapped using the same ppp bit value for
readonly mapping.).
Update the code such that for earlier architecture version we use ppp
value 0b011 for readonly mapping. We don't differentiate between power5+
and power5 here and apply the new ppp bits only from power6 (ISA 2.05).
This keep the changes minimal.
This fixes issue with PS3 spu usage reported at
https://lkml.kernel.org/r/rep.1421449714.geoff@infradead.org
Fixes: e58e87adc8 ("powerpc/mm: Update _PAGE_KERNEL_RO")
Cc: stable@vger.kernel.org # v4.7+
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 requires the host to set up a partition table, which is a
table in memory indexed by logical partition ID (LPID) which
contains the pointers to page tables and process tables for the
host and each guest.
This factors out the initialization of the partition table into
a single function. This code was previously duplicated between
hash_utils_64.c and pgtable-radix.c.
This provides a function for setting a partition table entry,
which is used in early MMU initialization, and will be used by
KVM whenever a guest is created. This function includes a tlbie
instruction which will flush all TLB entries for the LPID and
all caches of the partition table entry for the LPID, across the
system.
This also moves a call to memblock_set_current_limit(), which was
in radix_init_partition_table(), but has nothing to do with the
partition table. By analogy with the similar code for hash, the
call gets moved to near the end of radix__early_init_mmu(). It
now gets called when running as a guest, whereas previously it
would only be called if the kernel is running as the host.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
VSID 0 is bad address. Don't create slb entries on coproc fault for
bad address
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We need to update on secondaries for the selected MMU mode.
Fixes: ad410674f5 ("powerpc/mm: Update the HID bit when switching from radix to hash")
Reported-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On POWER9 DD1, when we do a local TLB invalidate we also need to explicitly
invalidate the ERAT.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Version 3.00 of the ISA states that the PATS (partition table size) field
of the PTCR (partition table control register) and the PRTS (process table
size) field of the partition table entry must both be less than or equal
to 24. However the actual size of the partition and process tables is equal
to 2 to the power of 12 plus the PATS and PRTS fields, respectively. This
means that the max allowable size of each of these tables is 2^36 or 64GB
for both.
Thus when checking the size shift for each we should be checking for values
of greater than 36 instead of the current check for shifts larger than 24
and 23.
Fixes: 2bfd65e45e
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Useful to be able to dump the kernel hash page table to check
which pages are hashed along with their sizes and other details.
Add a debugfs file to check the hash page table. If radix is enabled
(and so there is no hash page table) then this file doesn't exist. To
use this the PPC_PTDUMP config option must be selected.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
[mpe: Fix build with SPARSEMEM_VMEMMAP=n & PSERIES=n]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Useful to be able to dump the kernels page tables to check permissions
and memory types - derived from arm64's implementation.
Add a debugfs file to check the page tables. To use this the PPC_PTDUMP
config option must be selected.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This changes the way that we support the new ISA v3.00 HPTE format.
Instead of adapting everything that uses HPTE values to handle either
the old format or the new format, depending on which CPU we are on,
we now convert explicitly between old and new formats if necessary
in the low-level routines that actually access HPTEs in memory.
This limits the amount of code that needs to know about the new
format and makes the conversions explicit. This is OK because the
old format contains all the information that is in the new format.
This also fixes operation under a hypervisor, because the H_ENTER
hypercall (and other hypercalls that deal with HPTEs) will continue
to require the HPTE value to be supplied in the old format. At
present the kernel will not boot in HPT mode on POWER9 under a
hypervisor.
This fixes and partially reverts commit 50de596de8
("powerpc/mm/hash: Add support for Power9 Hash", 2016-04-29).
Fixes: 50de596de8 ("powerpc/mm/hash: Add support for Power9 Hash")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In ISA v2.05, the tlbiel instruction takes two arguments, RB and L:
tlbiel RB,L
+---------+---------+----+---------+---------+---------+----+
| 31 | / | L | / | RB | 274 | / |
| 31 - 26 | 25 - 22 | 21 | 20 - 16 | 15 - 11 | 10 - 1 | 0 |
+---------+---------+----+---------+---------+---------+----+
In ISA v2.06 tlbiel takes only one argument, RB:
tlbiel RB
+---------+---------+---------+---------+---------+----+
| 31 | / | / | RB | 274 | / |
| 31 - 26 | 25 - 21 | 20 - 16 | 15 - 11 | 10 - 1 | 0 |
+---------+---------+---------+---------+---------+----+
And in ISA v3.00 tlbiel takes five arguments:
tlbiel RB,RS,RIC,PRS,R
+---------+---------+----+---------+----+----+---------+---------+----+
| 31 | RS | / | RIC |PRS | R | RB | 274 | / |
| 31 - 26 | 25 - 21 | 20 | 19 - 18 | 17 | 16 | 15 - 11 | 10 - 1 | 0 |
+---------+---------+----+---------+----+----+---------+---------+----+
However the assembler also accepts "tlbiel RB", and generates
"tlbiel RB,r0,0,0,0".
As you can see above the L field from the v2.05 encoding overlaps with the
reserved field of the v2.06 encoding, and the low bit of the RS field of the
v3.00 encoding.
Currently in __tlbiel() we generate two tlbiel instructions manually using hex
constants. In the first case, for MMU_PAGE_4K, we generate "tlbiel RB,0", which
is safe in all cases, because the L bit is zero.
However in the default case we generate "tlbiel RB,1", therefore setting bit 21
to 1.
This is not an actual bug on v2.06 processors, because the CPU ignores the value
of the reserved field. However software is supposed to encode the reserved
fields as zero to enable forward compatibility.
On v3.00 processors setting bit 21 to 1 and no other bits of RS, means we are
using r1 for the value of RS.
Although it's not obvious, the code sets the IS field (bits 10-11) to 0 (by
omission), and L=1, in the va value, which is passed as RB. We also pass R=0 in
the instruction.
The combination of IS=0, L=1 and R=0 means the value of RS is not used, so even
on ISA v3.00 there is no actual bug.
We should still fix it, as setting a reserved bit on v2.06 is naughty, and we
are only avoiding a bug on v3.00 by accident rather than design. Use
ASM_FTR_IFSET() to generate the single argument form on ISA v2.06 and later, and
the two argument form on pre v2.06.
Although there may be very old toolchains which don't understand tlbiel, we have
other code in the tree which has been using tlbiel for over five years, and no
one has reported any build failures, so just let the assembler generate the
instructions.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Rewrite change log, use IFSET instead of IFCLR]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This halves the exception table size on 64-bit builds, and it allows
build-time sorting of exception tables to work on relocated kernels.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Minor asm fixups and bits to keep the selftests working]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Before this patch, we used tlbiel, if we ever ran only on this core.
That was mostly derived from the nohash usage of the same. But is
incorrect, the ISA 3.0 clarifies tlbiel such that:
"All TLB entries that have all of the following properties are made
invalid on the thread executing the tlbiel instruction"
ie. tlbiel only invalidates TLB entries on the current thread. So if the
mm has been used on any other thread (aka. cpu) then we must broadcast
the invalidate.
This bug could lead to invalid TLB entries if a program runs on multiple
threads of a core.
Hence use tlbiel, if we only ever ran on only the current cpu.
Fixes: 1a472c9dba ("powerpc/mm/radix: Add tlbflush routines")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At boot we dump the NUMA memory topology in dump_numa_memory_topology(),
at KERN_DEBUG level, resulting in output like:
Node 0 Memory: 0x0-0x100000000
Node 1 Memory: 0x100000000-0x200000000
Which is nice enough, but immediately after that we iterate over each
node and call setup_node_data(), which also prints out the node ranges,
at KERN_INFO, giving eg:
numa: Initmem setup node 0 [mem 0x00000000-0xffffffff]
numa: Initmem setup node 1 [mem 0x100000000-0x1ffffffff]
Additionally dump_numa_memory_topology() does not use KERN_CONT
correctly, resulting in split output lines on recent kernels.
So drop dump_numa_memory_topology() as superfluous chatter.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If a cxl adapter faults on an invalid address for a kernel context, we
may enter copro_calculate_slb() with a NULL mm pointer (kernel
context) and an effective address which looks like a user
address. Which will cause a crash when dereferencing mm. It is clearly
an AFU bug, but there's no reason to crash either. So return an error,
so that cxl can ack the interrupt with an address error.
Fixes: 73d16a6e0e ("powerpc/cell: Move data segment faulting code out of cell platform")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull kbuild updates from Michal Marek:
- EXPORT_SYMBOL for asm source by Al Viro.
This does bring a regression, because genksyms no longer generates
checksums for these symbols (CONFIG_MODVERSIONS). Nick Piggin is
working on a patch to fix this.
Plus, we are talking about functions like strcpy(), which rarely
change prototypes.
- Fixes for PPC fallout of the above by Stephen Rothwell and Nick
Piggin
- fixdep speedup by Alexey Dobriyan.
- preparatory work by Nick Piggin to allow architectures to build with
-ffunction-sections, -fdata-sections and --gc-sections
- CONFIG_THIN_ARCHIVES support by Stephen Rothwell
- fix for filenames with colons in the initramfs source by me.
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (22 commits)
initramfs: Escape colons in depfile
ppc: there is no clear_pages to export
powerpc/64: whitelist unresolved modversions CRCs
kbuild: -ffunction-sections fix for archs with conflicting sections
kbuild: add arch specific post-link Makefile
kbuild: allow archs to select link dead code/data elimination
kbuild: allow architectures to use thin archives instead of ld -r
kbuild: Regenerate genksyms lexer
kbuild: genksyms fix for typeof handling
fixdep: faster CONFIG_ search
ia64: move exports to definitions
sparc32: debride memcpy.S a bit
[sparc] unify 32bit and 64bit string.h
sparc: move exports to definitions
ppc: move exports to definitions
arm: move exports to definitions
s390: move exports to definitions
m68k: move exports to definitions
alpha: move exports to actual definitions
x86: move exports to actual definitions
...
In commit 2b4e3ad8f5 ("powerpc/mm/hash64: Don't test for machine type
to detect HEA special case") we changed the logic in might_have_hea()
to check FW_FEATURE_SPLPAR rather than machine_is(pseries).
However the check was incorrectly negated, leading to crashes on
machines with HEA adapters, such as:
mm: Hashing failure ! EA=0xd000080080004040 access=0x800000000000000e current=NetworkManager
trap=0x300 vsid=0x13d349c ssize=1 base psize=2 psize 2 pte=0xc0003cc033e701ae
Unable to handle kernel paging request for data at address 0xd000080080004040
Call Trace:
.ehea_create_cq+0x148/0x340 [ehea] (unreliable)
.ehea_up+0x258/0x1200 [ehea]
.ehea_open+0x44/0x1a0 [ehea]
...
Fix it by removing the negation.
Fixes: 2b4e3ad8f5 ("powerpc/mm/hash64: Don't test for machine type to detect HEA special case")
Cc: stable@vger.kernel.org # v4.8+
Reported-by: Denis Kirjanov <kda@linux-powerpc.org>
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Highlights:
- Major rework of Book3S 64-bit exception vectors (Nicholas Piggin)
- Use gas sections for arranging exception vectors et. al.
- Large set of TM cleanups and selftests (Cyril Bur)
- Enable transactional memory (TM) lazily for userspace (Cyril Bur)
- Support for XZ compression in the zImage wrapper (Oliver O'Halloran)
- Add support for bpf constant blinding (Naveen N. Rao)
- Beginnings of upstream support for PA Semi Nemo motherboards (Darren Stevens)
Fixes:
- Ensure .mem(init|exit).text are within _stext/_etext (Michael Ellerman)
- xmon: Don't use ld on 32-bit (Michael Ellerman)
- vdso64: Use double word compare on pointers (Anton Blanchard)
- powerpc/nvram: Fix an incorrect partition merge (Pan Xinhui)
- powerpc: Fix usage of _PAGE_RO in hugepage (Christophe Leroy)
- powerpc/mm: Update FORCE_MAX_ZONEORDER range to allow hugetlb w/4K (Aneesh Kumar K.V)
- Fix memory leak in queue_hotplug_event() error path (Andrew Donnellan)
- Replay hypervisor maintenance interrupt first (Nicholas Piggin)
Cleanups & features:
- Sparse fixes/cleanups (Daniel Axtens)
- Preserve CFAR value on SLB miss caused by access to bogus address (Paul Mackerras)
- Radix MMU fixups for POWER9 (Aneesh Kumar K.V)
- Support for setting used_(vsr|vr|spe) in sigreturn path (for CRIU) (Simon Guo)
- Optimise syscall entry for virtual, relocatable case (Nicholas Piggin)
- Optimise MSR handling in exception handling (Nicholas Piggin)
- Support for kexec with Radix MMU (Benjamin Herrenschmidt)
- powernv EEH fixes (Russell Currey)
- Suprise PCI hotplug support for powernv (Gavin Shan)
- Endian/sparse fixes for powernv PCI (Gavin Shan)
- Defconfig updates (Anton Blanchard)
- Various performance optimisations (Anton Blanchard)
- Align hot loops of memset() and backwards_memcpy()
- During context switch, check before setting mm_cpumask
- Remove static branch prediction in atomic{, 64}_add_unless
- Only disable HAVE_EFFICIENT_UNALIGNED_ACCESS on POWER7 little endian
- Set default CPU type to POWER8 for little endian builds
- KVM: PPC: Book3S HV: Migrate pinned pages out of CMA (Balbir Singh)
- cxl: Flush PSL cache before resetting the adapter (Frederic Barrat)
- cxl: replace loop with for_each_child_of_node(), remove unneeded of_node_put() (Andrew Donnellan)
- Fix HV facility unavailable to use correct handler (Nicholas Piggin)
- Remove unnecessary syscall trampoline (Nicholas Piggin)
- fadump: Fix build break when CONFIG_PROC_VMCORE=n (Michael Ellerman)
- Quieten EEH message when no adapters are found (Anton Blanchard)
- powernv: Add PHB register dump debugfs handle (Russell Currey)
- Use kprobe blacklist for exception handlers & asm functions (Nicholas Piggin)
- Document the syscall ABI (Nicholas Piggin)
- MAINTAINERS: Update cxl maintainers (Michael Neuling)
- powerpc: Remove all usages of NO_IRQ (Michael Ellerman)
Minor cleanups:
- Andrew Donnellan, Christophe Leroy, Colin Ian King, Cyril Bur, Frederic Barrat,
Pan Xinhui, PrasannaKumar Muralidharan, Rui Teng, Simon Guo.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Jnn8
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights:
- Major rework of Book3S 64-bit exception vectors (Nicholas Piggin)
- Use gas sections for arranging exception vectors et. al.
- Large set of TM cleanups and selftests (Cyril Bur)
- Enable transactional memory (TM) lazily for userspace (Cyril Bur)
- Support for XZ compression in the zImage wrapper (Oliver
O'Halloran)
- Add support for bpf constant blinding (Naveen N. Rao)
- Beginnings of upstream support for PA Semi Nemo motherboards
(Darren Stevens)
Fixes:
- Ensure .mem(init|exit).text are within _stext/_etext (Michael
Ellerman)
- xmon: Don't use ld on 32-bit (Michael Ellerman)
- vdso64: Use double word compare on pointers (Anton Blanchard)
- powerpc/nvram: Fix an incorrect partition merge (Pan Xinhui)
- powerpc: Fix usage of _PAGE_RO in hugepage (Christophe Leroy)
- powerpc/mm: Update FORCE_MAX_ZONEORDER range to allow hugetlb w/4K
(Aneesh Kumar K.V)
- Fix memory leak in queue_hotplug_event() error path (Andrew
Donnellan)
- Replay hypervisor maintenance interrupt first (Nicholas Piggin)
Various performance optimisations (Anton Blanchard):
- Align hot loops of memset() and backwards_memcpy()
- During context switch, check before setting mm_cpumask
- Remove static branch prediction in atomic{, 64}_add_unless
- Only disable HAVE_EFFICIENT_UNALIGNED_ACCESS on POWER7 little
endian
- Set default CPU type to POWER8 for little endian builds
Cleanups & features:
- Sparse fixes/cleanups (Daniel Axtens)
- Preserve CFAR value on SLB miss caused by access to bogus address
(Paul Mackerras)
- Radix MMU fixups for POWER9 (Aneesh Kumar K.V)
- Support for setting used_(vsr|vr|spe) in sigreturn path (for CRIU)
(Simon Guo)
- Optimise syscall entry for virtual, relocatable case (Nicholas
Piggin)
- Optimise MSR handling in exception handling (Nicholas Piggin)
- Support for kexec with Radix MMU (Benjamin Herrenschmidt)
- powernv EEH fixes (Russell Currey)
- Suprise PCI hotplug support for powernv (Gavin Shan)
- Endian/sparse fixes for powernv PCI (Gavin Shan)
- Defconfig updates (Anton Blanchard)
- KVM: PPC: Book3S HV: Migrate pinned pages out of CMA (Balbir Singh)
- cxl: Flush PSL cache before resetting the adapter (Frederic Barrat)
- cxl: replace loop with for_each_child_of_node(), remove unneeded
of_node_put() (Andrew Donnellan)
- Fix HV facility unavailable to use correct handler (Nicholas
Piggin)
- Remove unnecessary syscall trampoline (Nicholas Piggin)
- fadump: Fix build break when CONFIG_PROC_VMCORE=n (Michael
Ellerman)
- Quieten EEH message when no adapters are found (Anton Blanchard)
- powernv: Add PHB register dump debugfs handle (Russell Currey)
- Use kprobe blacklist for exception handlers & asm functions
(Nicholas Piggin)
- Document the syscall ABI (Nicholas Piggin)
- MAINTAINERS: Update cxl maintainers (Michael Neuling)
- powerpc: Remove all usages of NO_IRQ (Michael Ellerman)
Minor cleanups:
- Andrew Donnellan, Christophe Leroy, Colin Ian King, Cyril Bur,
Frederic Barrat, Pan Xinhui, PrasannaKumar Muralidharan, Rui Teng,
Simon Guo"
* tag 'powerpc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits)
powerpc/bpf: Add support for bpf constant blinding
powerpc/bpf: Implement support for tail calls
powerpc/bpf: Introduce accessors for using the tmp local stack space
powerpc/fadump: Fix build break when CONFIG_PROC_VMCORE=n
powerpc: tm: Enable transactional memory (TM) lazily for userspace
powerpc/tm: Add TM Unavailable Exception
powerpc: Remove do_load_up_transact_{fpu,altivec}
powerpc: tm: Rename transct_(*) to ck(\1)_state
powerpc: tm: Always use fp_state and vr_state to store live registers
selftests/powerpc: Add checks for transactional VSXs in signal contexts
selftests/powerpc: Add checks for transactional VMXs in signal contexts
selftests/powerpc: Add checks for transactional FPUs in signal contexts
selftests/powerpc: Add checks for transactional GPRs in signal contexts
selftests/powerpc: Check that signals always get delivered
selftests/powerpc: Add TM tcheck helpers in C
selftests/powerpc: Allow tests to extend their kill timeout
selftests/powerpc: Introduce GPR asm helper header file
selftests/powerpc: Move VMX stack frame macros to header file
selftests/powerpc: Rework FPU stack placement macros and move to header file
selftests/powerpc: Check for VSX preservation across userspace preemption
...
All architectures:
Move `make kvmconfig` stubs from x86; use 64 bits for debugfs stats.
ARM:
Important fixes for not using an in-kernel irqchip; handle SError
exceptions and present them to guests if appropriate; proxying of GICV
access at EL2 if guest mappings are unsafe; GICv3 on AArch32 on ARMv8;
preparations for GICv3 save/restore, including ABI docs; cleanups and
a bit of optimizations.
MIPS:
A couple of fixes in preparation for supporting MIPS EVA host kernels;
MIPS SMP host & TLB invalidation fixes.
PPC:
Fix the bug which caused guests to falsely report lockups; other minor
fixes; a small optimization.
s390:
Lazy enablement of runtime instrumentation; up to 255 CPUs for nested
guests; rework of machine check deliver; cleanups and fixes.
x86:
IOMMU part of AMD's AVIC for vmexit-less interrupt delivery; Hyper-V
TSC page; per-vcpu tsc_offset in debugfs; accelerated INS/OUTS in
nVMX; cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJX9iDrAAoJEED/6hsPKofoOPoIAIUlgojkb9l2l1XVDgsXdgQL
sRVhYSVv7/c8sk9vFImrD5ElOPZd+CEAIqFOu45+NM3cNi7gxip9yftUVs7wI5aC
eDZRWm1E4trDZLe54ZM9ThcqZzZZiELVGMfR1+ZndUycybwyWzafpXYsYyaXp3BW
hyHM3qVkoWO3dxBWFwHIoO/AUJrWYkRHEByKyvlC6KPxSdBPSa5c1AQwMCoE0Mo4
K/xUj4gBn9eMelNhg4Oqu/uh49/q+dtdoP2C+sVM8bSdquD+PmIeOhPFIcuGbGFI
B+oRpUhIuntN39gz8wInJ4/GRSeTuR2faNPxMn4E1i1u4LiuJvipcsOjPfe0a18=
=fZRB
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"All architectures:
- move `make kvmconfig` stubs from x86
- use 64 bits for debugfs stats
ARM:
- Important fixes for not using an in-kernel irqchip
- handle SError exceptions and present them to guests if appropriate
- proxying of GICV access at EL2 if guest mappings are unsafe
- GICv3 on AArch32 on ARMv8
- preparations for GICv3 save/restore, including ABI docs
- cleanups and a bit of optimizations
MIPS:
- A couple of fixes in preparation for supporting MIPS EVA host
kernels
- MIPS SMP host & TLB invalidation fixes
PPC:
- Fix the bug which caused guests to falsely report lockups
- other minor fixes
- a small optimization
s390:
- Lazy enablement of runtime instrumentation
- up to 255 CPUs for nested guests
- rework of machine check deliver
- cleanups and fixes
x86:
- IOMMU part of AMD's AVIC for vmexit-less interrupt delivery
- Hyper-V TSC page
- per-vcpu tsc_offset in debugfs
- accelerated INS/OUTS in nVMX
- cleanups and fixes"
* tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (140 commits)
KVM: MIPS: Drop dubious EntryHi optimisation
KVM: MIPS: Invalidate TLB by regenerating ASIDs
KVM: MIPS: Split kernel/user ASID regeneration
KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
KVM: arm/arm64: vgic: Don't flush/sync without a working vgic
KVM: arm64: Require in-kernel irqchip for PMU support
KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register
KVM: PPC: Book3S PR: Support 64kB page size on POWER8E and POWER8NVL
KVM: PPC: Book3S: Remove duplicate setting of the B field in tlbie
KVM: PPC: BookE: Fix a sanity check
KVM: PPC: Book3S HV: Take out virtual core piggybacking code
KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread
ARM: gic-v3: Work around definition of gic_write_bpr1
KVM: nVMX: Fix the NMI IDT-vectoring handling
KVM: VMX: Enable MSR-BASED TPR shadow even if APICv is inactive
KVM: nVMX: Fix reload apic access page warning
kvmconfig: add virtio-gpu to config fragment
config: move x86 kvm_guest.config to a common location
arm64: KVM: Remove duplicating init code for setting VMID
ARM: KVM: Support vgic-v3
...
Pull CPU hotplug updates from Thomas Gleixner:
"Yet another batch of cpu hotplug core updates and conversions:
- Provide core infrastructure for multi instance drivers so the
drivers do not have to keep custom lists.
- Convert custom lists to the new infrastructure. The block-mq custom
list conversion comes through the block tree and makes the diffstat
tip over to more lines removed than added.
- Handle unbalanced hotplug enable/disable calls more gracefully.
- Remove the obsolete CPU_STARTING/DYING notifier support.
- Convert another batch of notifier users.
The relayfs changes which conflicted with the conversion have been
shipped to me by Andrew.
The remaining lot is targeted for 4.10 so that we finally can remove
the rest of the notifiers"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
cpufreq: Fix up conversion to hotplug state machine
blk/mq: Reserve hotplug states for block multiqueue
x86/apic/uv: Convert to hotplug state machine
s390/mm/pfault: Convert to hotplug state machine
mips/loongson/smp: Convert to hotplug state machine
mips/octeon/smp: Convert to hotplug state machine
fault-injection/cpu: Convert to hotplug state machine
padata: Convert to hotplug state machine
cpufreq: Convert to hotplug state machine
ACPI/processor: Convert to hotplug state machine
virtio scsi: Convert to hotplug state machine
oprofile/timer: Convert to hotplug state machine
block/softirq: Convert to hotplug state machine
lib/irq_poll: Convert to hotplug state machine
x86/microcode: Convert to hotplug state machine
sh/SH-X3 SMP: Convert to hotplug state machine
ia64/mca: Convert to hotplug state machine
ARM/OMAP/wakeupgen: Convert to hotplug state machine
ARM/shmobile: Convert to hotplug state machine
arm64/FP/SIMD: Convert to hotplug state machine
...
When PCI Device pass-through is enabled via VFIO, KVM-PPC will
pin pages using get_user_pages_fast(). One of the downsides of
the pinning is that the page could be in CMA region. The CMA
region is used for other allocations like the hash page table.
Ideally we want the pinned pages to be from non CMA region.
This patch (currently only for KVM PPC with VFIO) forcefully
migrates the pages out (huge pages are omitted for the moment).
There are more efficient ways of doing this, but that might
be elaborate and might impact a larger audience beyond just
the kvm ppc implementation.
The magic is in new_iommu_non_cma_page() which allocates the
new page from a non CMA region.
I've tested the patches lightly at my end. The full solution
requires migration of THP pages in the CMA region. That work
will be done incrementally on top of this.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Merged via powerpc tree as that's where the changes are]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The same logic appears twice and should probably be pulled out into a
function.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Rui Teng <rui.teng@linux.vnet.ibm.com>
[mpe: Rename to tm_flush_hash_page() and move comment into the function]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On some CPUs like the 8xx, _PAGE_RW hence _PAGE_WRITE is defined
as 0 and _PAGE_RO has to be set when a page is not writable
_PAGE_RO is defined by default in pte-common.h, however BOOK3S/64
doesn't include that file so _PAGE_RO has to be defined explicitly
in book3s/64/pgtable.h
Fixes: a7b9f671f2 ("powerpc32: adds handling of _PAGE_RO")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Just using the hash ops won't work anymore since radix will have
NULL in there. Instead create an mmu_cleanup_all() function which
will do the right thing based on the MMU mode.
For Radix, for now I clear UPRT and the PTCR, effectively switching
back to Radix with no partition table setup.
Currently set it to NULL on BookE thought it might be a good idea
to wipe the TLB there (Scott ?)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently we mark the C implementations of some exception handlers as
__kprobes. This has the effect of putting them in the ".kprobes.text"
section, which separates them from the rest of the text.
Instead we can use the blacklist macros to add the symbols to a
blacklist which kprobes will check. This allows the linker to move
exception handler functions close to callers and avoids trampolines in
larger kernels.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Reword change log a bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The message is missing a \n, add it. Switch to pr_warn(), it's shorter
and less ugly.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Power9 DD1 requires to update the hid0 register when switching from
hash to radix.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 DD1 requires pte to be marked invalid (V=0) before updating
it with the new value. This makes this distinction for the different
revisions.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 2578bfae84 ("[POWERPC] Create and use CONFIG_WORD_SIZE") added
CONFIG_WORD_SIZE, and suggests that other arches were going to do
likewise.
But that never happened, powerpc is the only architecture which uses it.
So switch to using a simple make variable, BITS, like x86, sh, sparc and
tile. It is also easier to spell and simpler, avoiding any confusion
about whether it's defined due to ordering of make vs kconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, if userspace or the kernel accesses a completely bogus address,
for example with any of bits 46-59 set, we first take an SLB miss interrupt,
install a corresponding SLB entry with VSID 0, retry the instruction, then
take a DSI/ISI interrupt because there is no HPT entry mapping the address.
However, by the time of the second interrupt, the Come-From Address Register
(CFAR) has been overwritten by the rfid instruction at the end of the SLB
miss interrupt handler. Since bogus accesses can often be caused by a
function return after the stack has been overwritten, the CFAR value would
be very useful as it could indicate which function it was whose return had
led to the bogus address.
This patch adds code to create a full exception frame in the SLB miss handler
in the case of a bogus address, rather than inserting an SLB entry with a
zero VSID field. Then we call a new slb_miss_bad_addr() function in C code,
which delivers a signal for a user access or creates an oops for a kernel
access. In the latter case the oops message will show the CFAR value at the
time of the access.
In the case of the radix MMU, a segment miss interrupt indicates an access
outside the ranges mapped by the page tables. Previously this was handled
by the code for an unrecoverable SLB miss (one with MSR[RI] = 0), which is
not really correct. With this patch, we now handle these interrupts with
slb_miss_bad_addr(), which is much more consistent.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This replaces a 2-D search through an array with a simple 8-bit table
lookup for determining the actual and/or base page size for a HPT entry.
The encoding in the second doubleword of the HPTE is designed to encode
the actual and base page sizes without using any more bits than would be
needed for a 4k page number, by using between 1 and 8 low-order bits of
the RPN (real page number) field to encode the page sizes. A single
"large page" bit in the first doubleword indicates that these low-order
bits are to be interpreted like this.
We can determine the page sizes by using the low-order 8 bits of the RPN
to look up a 256-entry table. For actual page sizes less than 1MB, some
of the upper bits of these 8 bits are going to be real address bits, but
we can cope with that by replicating the entries for those smaller page
sizes.
While we're at it, let's move the hpte_page_size() and hpte_base_page_size()
functions from a KVM-specific header to a header for 64-bit HPT systems,
since this computation doesn't have anything specifically to do with KVM.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
In commit c60ac5693c ("powerpc: Update kernel VSID range", 2013-03-13)
we lost a check on the region number (the top four bits of the effective
address) for addresses below PAGE_OFFSET. That commit replaced a check
that the top 18 bits were all zero with a check that bits 46 - 59 were
zero (performed for all addresses, not just user addresses).
This means that userspace can access an address like 0x1000_0xxx_xxxx_xxxx
and we will insert a valid SLB entry for it. The VSID used will be the
same as if the top 4 bits were 0, but the page size will be some random
value obtained by indexing beyond the end of the mm_ctx_high_slices_psize
array in the paca. If that page size is the same as would be used for
region 0, then userspace just has an alias of the region 0 space. If the
page size is different, then no HPTE will be found for the access, and
the process will get a SIGSEGV (since hash_page_mm() will refuse to create
a HPTE for the bogus address).
The access beyond the end of the mm_ctx_high_slices_psize can be at most
5.5MB past the array, and so will be in RAM somewhere. Since the access
is a load performed in real mode, it won't fault or crash the kernel.
At most this bug could perhaps leak a little bit of information about
blocks of 32 bytes of memory located at offsets of i * 512kB past the
paca->mm_ctx_high_slices_psize array, for 1 <= i <= 11.
Fixes: c60ac5693c ("powerpc: Update kernel VSID range")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Install the callbacks via the state machine.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: rt@linutronix.de
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20160818125731.27256-17-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
These files were only including module.h for exception table
related functions. We've now separated that content out into its
own file "extable.h" so now move over to that and avoid all the
extra header content in module.h that we don't really need to compile
these files.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Fixes:
- Fix early access to cpu_spec relocation from Benjamin Herrenschmidt
- Fix incorrect event codes in power9-event-list from Madhavan Srinivasan
- Move register_process_table() out of ppc_md from Michael Ellerman
Use jump_label for [cpu|mmu]_has_feature() from Aneesh Kumar K.V, Kevin Hao and Michael Ellerman:
- Add mmu_early_init_devtree() from Michael Ellerman
- Move disable_radix handling into mmu_early_init_devtree() from Michael Ellerman
- Do hash device tree scanning earlier from Michael Ellerman
- Do radix device tree scanning earlier from Michael Ellerman
- Do feature patching before MMU init from Michael Ellerman
- Check features don't change after patching from Michael Ellerman
- Make MMU_FTR_RADIX a MMU family feature from Aneesh Kumar K.V
- Convert mmu_has_feature() to returning bool from Michael Ellerman
- Convert cpu_has_feature() to returning bool from Michael Ellerman
- Define radix_enabled() in one place & use static inline from Michael Ellerman
- Add early_[cpu|mmu]_has_feature() from Michael Ellerman
- Convert early cpu/mmu feature check to use the new helpers from Aneesh Kumar K.V
- jump_label: Make it possible for arches to invoke jump_label_init() earlier from Kevin Hao
- Call jump_label_init() in apply_feature_fixups() from Aneesh Kumar K.V
- Remove mfvtb() from Kevin Hao
- Move cpu_has_feature() to a separate file from Kevin Hao
- Add kconfig option to use jump labels for cpu/mmu_has_feature() from Michael Ellerman
- Add option to use jump label for cpu_has_feature() from Kevin Hao
- Add option to use jump label for mmu_has_feature() from Kevin Hao
- Catch usage of cpu/mmu_has_feature() before jump label init from Aneesh Kumar K.V
- Annotate jump label assembly from Michael Ellerman
TLB flush enhancements from Aneesh Kumar K.V:
- radix: Implement tlb mmu gather flush efficiently
- Add helper for finding SLBE LLP encoding
- Use hugetlb flush functions
- Drop multiple definition of mm_is_core_local
- radix: Add tlb flush of THP ptes
- radix: Rename function and drop unused arg
- radix/hugetlb: Add helper for finding page size
- hugetlb: Add flush_hugetlb_tlb_range
- remove flush_tlb_page_nohash
Add new ptrace regsets from Anshuman Khandual and Simon Guo:
- elf: Add powerpc specific core note sections
- Add the function flush_tmregs_to_thread
- Enable in transaction NT_PRFPREG ptrace requests
- Enable in transaction NT_PPC_VMX ptrace requests
- Enable in transaction NT_PPC_VSX ptrace requests
- Adapt gpr32_get, gpr32_set functions for transaction
- Enable support for NT_PPC_CGPR
- Enable support for NT_PPC_CFPR
- Enable support for NT_PPC_CVMX
- Enable support for NT_PPC_CVSX
- Enable support for TM SPR state
- Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR
- Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR
- Enable support for EBB registers
- Enable support for Performance Monitor registers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0Q8E
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"These were delayed for various reasons, so I let them sit in next a
bit longer, rather than including them in my first pull request.
Fixes:
- Fix early access to cpu_spec relocation from Benjamin Herrenschmidt
- Fix incorrect event codes in power9-event-list from Madhavan Srinivasan
- Move register_process_table() out of ppc_md from Michael Ellerman
Use jump_label use for [cpu|mmu]_has_feature():
- Add mmu_early_init_devtree() from Michael Ellerman
- Move disable_radix handling into mmu_early_init_devtree() from Michael Ellerman
- Do hash device tree scanning earlier from Michael Ellerman
- Do radix device tree scanning earlier from Michael Ellerman
- Do feature patching before MMU init from Michael Ellerman
- Check features don't change after patching from Michael Ellerman
- Make MMU_FTR_RADIX a MMU family feature from Aneesh Kumar K.V
- Convert mmu_has_feature() to returning bool from Michael Ellerman
- Convert cpu_has_feature() to returning bool from Michael Ellerman
- Define radix_enabled() in one place & use static inline from Michael Ellerman
- Add early_[cpu|mmu]_has_feature() from Michael Ellerman
- Convert early cpu/mmu feature check to use the new helpers from Aneesh Kumar K.V
- jump_label: Make it possible for arches to invoke jump_label_init() earlier from Kevin Hao
- Call jump_label_init() in apply_feature_fixups() from Aneesh Kumar K.V
- Remove mfvtb() from Kevin Hao
- Move cpu_has_feature() to a separate file from Kevin Hao
- Add kconfig option to use jump labels for cpu/mmu_has_feature() from Michael Ellerman
- Add option to use jump label for cpu_has_feature() from Kevin Hao
- Add option to use jump label for mmu_has_feature() from Kevin Hao
- Catch usage of cpu/mmu_has_feature() before jump label init from Aneesh Kumar K.V
- Annotate jump label assembly from Michael Ellerman
TLB flush enhancements from Aneesh Kumar K.V:
- radix: Implement tlb mmu gather flush efficiently
- Add helper for finding SLBE LLP encoding
- Use hugetlb flush functions
- Drop multiple definition of mm_is_core_local
- radix: Add tlb flush of THP ptes
- radix: Rename function and drop unused arg
- radix/hugetlb: Add helper for finding page size
- hugetlb: Add flush_hugetlb_tlb_range
- remove flush_tlb_page_nohash
Add new ptrace regsets from Anshuman Khandual and Simon Guo:
- elf: Add powerpc specific core note sections
- Add the function flush_tmregs_to_thread
- Enable in transaction NT_PRFPREG ptrace requests
- Enable in transaction NT_PPC_VMX ptrace requests
- Enable in transaction NT_PPC_VSX ptrace requests
- Adapt gpr32_get, gpr32_set functions for transaction
- Enable support for NT_PPC_CGPR
- Enable support for NT_PPC_CFPR
- Enable support for NT_PPC_CVMX
- Enable support for NT_PPC_CVSX
- Enable support for TM SPR state
- Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR
- Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR
- Enable support for EBB registers
- Enable support for Performance Monitor registers"
* tag 'powerpc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits)
powerpc/mm: Move register_process_table() out of ppc_md
powerpc/perf: Fix incorrect event codes in power9-event-list
powerpc/32: Fix early access to cpu_spec relocation
powerpc/ptrace: Enable support for Performance Monitor registers
powerpc/ptrace: Enable support for EBB registers
powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR
powerpc/ptrace: Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR
powerpc/ptrace: Enable support for TM SPR state
powerpc/ptrace: Enable support for NT_PPC_CVSX
powerpc/ptrace: Enable support for NT_PPC_CVMX
powerpc/ptrace: Enable support for NT_PPC_CFPR
powerpc/ptrace: Enable support for NT_PPC_CGPR
powerpc/ptrace: Adapt gpr32_get, gpr32_set functions for transaction
powerpc/ptrace: Enable in transaction NT_PPC_VSX ptrace requests
powerpc/ptrace: Enable in transaction NT_PPC_VMX ptrace requests
powerpc/ptrace: Enable in transaction NT_PRFPREG ptrace requests
powerpc/process: Add the function flush_tmregs_to_thread
elf: Add powerpc specific core note sections
powerpc/mm: remove flush_tlb_page_nohash
powerpc/mm/hugetlb: Add flush_hugetlb_tlb_range
...
We want to initialise register_process_table() before ppc_md is setup,
so that it can be called as part of MMU init (at least on Radix ATM).
That no longer works because probe_machine() requires that ppc_md be
empty before it's called, and we now do probe_machine() much later.
So make register_process_table a global for now. It will probably move
into a mmu_radix_ops struct at some point in the future.
This was broken by me when applying commit 7025776ed1 "powerpc/mm:
Move hash table ops to a separate structure" due to conflicts with other
patches.
Fixes: 7025776ed1 ("powerpc/mm: Move hash table ops to a separate structure")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There was only one use of __initdata_refok and __exit_refok
__init_refok was used 46 times against 82 for __ref.
Those definitions are obsolete since commit 312b1485fb ("Introduce new
section reference annotations tags: __ref, __refdata, __refconst")
This patch removes the following compatibility definitions and replaces
them treewide.
/* compatibility defines */
#define __init_refok __ref
#define __initdata_refok __refdata
#define __exit_refok __ref
I can also provide separate patches if necessary.
(One patch per tree and check in 1 month or 2 to remove old definitions)
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1466796271-3043-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This should be same as flush_tlb_page except for hash32. For hash32
I guess the existing code is wrong, because we don't seem to be
flushing tlb for Hash != 0 case at all. Fix this by switching to
calling flush_tlb_page() which does the right thing by flushing
tlb for both hash and nohash case with hash32
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some archs like ppc64 need to do special things when flushing tlb for
hugepage. Add a new helper to flush hugetlb tlb range. This helps us to
avoid flushing the entire tlb mapping for the pid.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the helper instead of open coding the same at multiple place
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of flushing the entire mm, implement a flush_pmd_tlb_range
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Replace opencoding of the same at multiple places with the helper.
No functional change with this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that we track page size in mmu_gather, we can use address based
tlbie format when doing a tlb_flush(). We don't do this if we are
invalidating the full address space.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This switches early feature checks to use the non static key variant of
the function. In later patches we will be switching cpu_has_feature()
and mmu_has_feature() to use static keys and we can use them only after
static key/jump label is initialized. Any check for feature before jump
label init should be done using this new helper.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
MMU feature bits are defined such that we use the lower half to
present MMU family features. Remove the strict split of half and
also move Radix to a mmu family feature. Radix introduce a new MMU
model and strictly speaking it is a new MMU family. This also free
up bits which can be used for individual features later.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Like we just did for hash, split the device tree scanning parts out and
call them from mmu_early_init_devtree().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently MMU initialisation (early_init_mmu()) consists of a mixture of
scanning the device tree, setting MMU feature bits, and then also doing
actual initialisation of MMU data structures.
We'd like to decouple the setting of the MMU features from the actual
setup. So split out the device tree scanning, and associated code, and
call it from mmu_init_early_devtree().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the handling of the disable_radix command line argument into the
newly created mmu_early_init_devtree().
It's an MMU option so it's preferable to have it in an mm related file,
and it also means platforms that don't support radix don't have to carry
the code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Highlights:
- PowerNV PCI hotplug support.
- Lots more Power9 support.
- eBPF JIT support on ppc64le.
- Lots of cxl updates.
- Boot code consolidation.
Bug fixes:
- Fix spin_unlock_wait() from Boqun Feng
- Fix stack pointer corruption in __tm_recheckpoint() from Michael Neuling
- Fix multiple bugs in memory_hotplug_max() from Bharata B Rao
- mm: Ensure "special" zones are empty from Oliver O'Halloran
- ftrace: Separate the heuristics for checking call sites from Michael Ellerman
- modules: Never restore r2 for a mprofile-kernel style mcount() call from Michael Ellerman
- Fix endianness when reading TCEs from Alexey Kardashevskiy
- start rtasd before PCI probing from Greg Kurz
- PCI: rpaphp: Fix slot registration for multiple slots under a PHB from Tyrel Datwyler
- powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev Bhattiprolu
Cleanups & fixes:
- Drop support for MPIC in pseries from Rashmica Gupta
- Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman
- Remove unused symbols in asm-offsets.c from Rashmica Gupta
- Fix SRIOV not building without EEH enabled from Russell Currey
- Remove kretprobe_trampoline_holder. from Thiago Jung Bauermann
- Reduce log level of PCI I/O space warning from Benjamin Herrenschmidt
- Add array bounds checking to crash_shutdown_handlers from Suraj Jitindar Singh
- Avoid -maltivec when using clang integrated assembler from Anton Blanchard
- Fix array overrun in ppc_rtas() syscall from Andrew Donnellan
- Fix error return value in cmm_mem_going_offline() from Rasmus Villemoes
- export cpu_to_core_id() from Mauricio Faria de Oliveira
- Remove old symbols from defconfigs from Andrew Donnellan
- Update obsolete comments in setup_32.c about entry conditions from Benjamin Herrenschmidt
- Add comment explaining the purpose of setup_kdump_trampoline() from Benjamin Herrenschmidt
- Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin Hao
- Remove RELOCATABLE_PPC32 from Kevin Hao
- Fix .long's in tlb-radix.c to more meaningful from Balbir Singh
Minor cleanups & fixes:
- Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin
Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King, Geliang
Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman, Michael Ellerman,
Stephen Rothwell, Stewart Smith.
Freescale updates from Scott:
- "Highlights include more 8xx optimizations, device tree updates,
and MVME7100 support."
PowerNV PCI hotplug from Gavin Shan:
- PCI: Add pcibios_setup_bridge()
- Override pcibios_setup_bridge()
- Remove PCI_RESET_DELAY_US
- Move pnv_pci_ioda_setup_opal_tce_kill() around
- Increase PE# capacity
- Allocate PE# in reverse order
- Create PEs in pcibios_setup_bridge()
- Setup PE for root bus
- Extend PCI bridge resources
- Make pnv_ioda_deconfigure_pe() visible
- Dynamically release PE
- Update bridge windows on PCI plug
- Delay populating pdn
- Support PCI slot ID
- Use PCI slot reset infrastructure
- Introduce pnv_pci_get_slot_id()
- Functions to get/set PCI slot state
- PCI/hotplug: PowerPC PowerNV PCI hotplug driver
- Print correct PHB type names
Power9 idle support from Shreyas B. Prabhu:
- set power_save func after the idle states are initialized
- Use PNV_THREAD_WINKLE macro while requesting for winkle
- make hypervisor state restore a function
- Rename idle_power7.S to idle_book3s.S
- Rename reusable idle functions to hardware agnostic names
- Make pnv_powersave_common more generic
- abstraction for saving SPRs before entering deep idle states
- Add platform support for stop instruction
- cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES
- cpuidle/powernv: cleanup cpuidle-powernv.c
- cpuidle/powernv: Add support for POWER ISA v3 idle states
- Use deepest stop state when cpu is offlined
Power9 PMU from Madhavan Srinivasan:
- factor out power8 pmu macros and defines
- factor out power8 pmu functions
- factor out power8 __init_pmu code
- Add power9 event list macros for generic and cache events
- Power9 PMU support
- Export Power9 generic and cache events to sysfs
Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt:
- Add XICS emulation APIs
- Move a few exception common handlers to make room
- Add support for HV virtualization interrupts
- Add mechanism to force a replay of interrupts
- Add ICP OPAL backend
- Discover IODA3 PHBs
- pci: Remove obsolete SW invalidate
- opal: Add real mode call wrappers
- Rename TCE invalidation calls
- Remove SWINV constants and obsolete TCE code
- Rework accessing the TCE invalidate register
- Fallback to OPAL for TCE invalidations
- Use the device-tree to get available range of M64's
- Check status of a PHB before using it
- pci: Don't try to allocate resources that will be reassigned
Other Power9:
- Send SIGBUS on unaligned copy and paste from Chris Smart
- Large Decrementer support from Oliver O'Halloran
- Load Monitor Register Support from Jack Miller
Performance improvements from Anton Blanchard:
- Avoid load hit store in __giveup_fpu() and __giveup_altivec()
- Avoid load hit store in setup_sigcontext()
- Remove assembly versions of strcpy, strcat, strlen and strcmp
- Align hot loops of some string functions
eBPF JIT from Naveen N. Rao:
- Fix/enhance 32-bit Load Immediate implementation
- Optimize 64-bit Immediate loads
- Introduce rotate immediate instructions
- A few cleanups
- Isolate classic BPF JIT specifics into a separate header
- Implement JIT compiler for extended BPF
Operator Panel driver from Suraj Jitindar Singh:
- devicetree/bindings: Add binding for operator panel on FSP machines
- Add inline function to get rc from an ASYNC_COMP opal_msg
- Add driver for operator panel on FSP machines
Sparse fixes from Daniel Axtens:
- make some things static
- Introduce asm-prototypes.h
- Include headers containing prototypes
- Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE
- kvm: Clarify __user annotations
- Pass endianness to sparse
- Make ppc_md.{halt, restart} __noreturn
MM fixes & cleanups from Aneesh Kumar K.V:
- radix: Update LPCR HR bit as per ISA
- use _raw variant of page table accessors
- Compile out radix related functions if RADIX_MMU is disabled
- Clear top 16 bits of va only on older cpus
- Print formation regarding the the MMU mode
- hash: Update SDR1 size encoding as documented in ISA 3.0
- radix: Update PID switch sequence
- radix: Update machine call back to support new HCALL.
- radix: Add LPID based tlb flush helpers
- radix: Add a kernel command line to disable radix
- Cleanup LPCR defines
Boot code consolidation from Benjamin Herrenschmidt:
- Move epapr_paravirt_early_init() to early_init_devtree()
- cell: Don't use flat device-tree after boot
- ge_imp3a: Don't use the flat device-tree after boot
- mpc85xx_ds: Don't use the flat device-tree after boot
- mpc85xx_rdb: Don't use the flat device-tree after boot
- Don't test for machine type in rtas_initialize()
- Don't test for machine type in smp_setup_cpu_maps()
- dt: Add of_device_compatible_match()
- Factor do_feature_fixup calls
- Move 64-bit feature fixup earlier
- Move 64-bit memory reserves to setup_arch()
- Use a cachable DART
- Move FW feature probing out of pseries probe()
- Put exception configuration in a common place
- Remove early allocation of the SMU command buffer
- Move MMU backend selection out of platform code
- pasemi: Remove IOBMAP allocation from platform probe()
- mm/hash: Don't use machine_is() early during boot
- Don't test for machine type to detect HEA special case
- pmac: Remove spurrious machine type test
- Move hash table ops to a separate structure
- Ensure that ppc_md is empty before probing for machine type
- Move 64-bit probe_machine() to later in the boot process
- Move 32-bit probe() machine to later in the boot process
- Get rid of ppc_md.init_early()
- Move the boot time info banner to a separate function
- Move setting of {i,d}cache_bsize to initialize_cache_info()
- Move the content of setup_system() to setup_arch()
- Move cache info inits to a separate function
- Re-order the call to smp_setup_cpu_maps()
- Re-order setup_panic()
- Make a few boot functions __init
- Merge 32-bit and 64-bit setup_arch()
Other new features:
- tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas
- tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas
- powerpc: Add module autoloading based on CPU features from Alastair D'Silva
- crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva
- Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt
- xmon: Dump ISA 2.06 SPRs from Michael Ellerman
- xmon: Dump ISA 2.07 SPRs from Michael Ellerman
- Add a parameter to disable 1TB segs from Oliver O'Halloran
- powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran
- Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli
- pseries: Add pseries hotplug workqueue from John Allen
- pseries: Add support for hotplug interrupt source from John Allen
- pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen
- pseries: Move property cloning into its own routine from Nathan Fontenot
- pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot
- pseries: Auto-online hotplugged memory from Nathan Fontenot
- pseries: Remove call to memblock_add() from Nathan Fontenot
cxl:
- Add set and get private data to context struct from Michael Neuling
- make base more explicitly non-modular from Paul Gortmaker
- Use for_each_compatible_node() macro from Wei Yongjun
- Frederic Barrat
- Abstract the differences between the PSL and XSL
- Make vPHB device node match adapter's
- Philippe Bergheaud
- Add mechanism for delivering AFU driver specific events
- Ignore CAPI adapters misplaced in switched slots
- Refine slice error debug messages
- Andrew Donnellan
- static-ify variables to fix sparse warnings
- PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
- PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state
- Add cxl_check_and_switch_mode() API to switch bi-modal cards
- remove dead Kconfig options
- fix potential NULL dereference in free_adapter()
- Ian Munsie
- Update process element after allocating interrupts
- Add support for CAPP DMA mode
- Fix allowing bogus AFU descriptors with 0 maximum processes
- Fix allocating a minimum of 2 pages for the SPA
- Fix bug where AFU disable operation had no effect
- Workaround XSL bug that does not clear the RA bit after a reset
- Fix NULL pointer dereference on kernel contexts with no AFU interrupts
- powerpc/powernv: Split cxl code out into a separate file
- Add cxl_slot_is_supported API
- Enable bus mastering for devices using CAPP DMA mode
- Move cxl_afu_get / cxl_afu_put to base
- Allow a default context to be associated with an external pci_dev
- Do not create vPHB if there are no AFU configuration records
- powerpc/powernv: Add support for the cxl kernel api on the real phb
- Add support for using the kernel API with a real PHB
- Add kernel APIs to get & set the max irqs per context
- Add preliminary workaround for CX4 interrupt limitation
- Add support for interrupts on the Mellanox CX4
- Workaround PE=0 hardware limitation in Mellanox CX4
- powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n
selftests:
- Test unaligned copy and paste from Chris Smart
- Load Monitor Register Tests from Jack Miller
- Cyril Bur
- exec() with suspended transaction
- Use signed long to read perf_event_paranoid
- Fix usage message in context_switch
- Fix generation of vector instructions/types in context_switch
- Michael Ellerman
- Use "Delta" rather than "Error" in normal output
- Import Anton's mmap & futex micro benchmarks
- Add a test for PROT_SAO
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Z5kM
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights:
- PowerNV PCI hotplug support.
- Lots more Power9 support.
- eBPF JIT support on ppc64le.
- Lots of cxl updates.
- Boot code consolidation.
Bug fixes:
- Fix spin_unlock_wait() from Boqun Feng
- Fix stack pointer corruption in __tm_recheckpoint() from Michael
Neuling
- Fix multiple bugs in memory_hotplug_max() from Bharata B Rao
- mm: Ensure "special" zones are empty from Oliver O'Halloran
- ftrace: Separate the heuristics for checking call sites from
Michael Ellerman
- modules: Never restore r2 for a mprofile-kernel style mcount() call
from Michael Ellerman
- Fix endianness when reading TCEs from Alexey Kardashevskiy
- start rtasd before PCI probing from Greg Kurz
- PCI: rpaphp: Fix slot registration for multiple slots under a PHB
from Tyrel Datwyler
- powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev
Bhattiprolu
Cleanups & fixes:
- Drop support for MPIC in pseries from Rashmica Gupta
- Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman
- Remove unused symbols in asm-offsets.c from Rashmica Gupta
- Fix SRIOV not building without EEH enabled from Russell Currey
- Remove kretprobe_trampoline_holder from Thiago Jung Bauermann
- Reduce log level of PCI I/O space warning from Benjamin
Herrenschmidt
- Add array bounds checking to crash_shutdown_handlers from Suraj
Jitindar Singh
- Avoid -maltivec when using clang integrated assembler from Anton
Blanchard
- Fix array overrun in ppc_rtas() syscall from Andrew Donnellan
- Fix error return value in cmm_mem_going_offline() from Rasmus
Villemoes
- export cpu_to_core_id() from Mauricio Faria de Oliveira
- Remove old symbols from defconfigs from Andrew Donnellan
- Update obsolete comments in setup_32.c about entry conditions from
Benjamin Herrenschmidt
- Add comment explaining the purpose of setup_kdump_trampoline() from
Benjamin Herrenschmidt
- Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin
Hao
- Remove RELOCATABLE_PPC32 from Kevin Hao
- Fix .long's in tlb-radix.c to more meaningful from Balbir Singh
Minor cleanups & fixes:
- Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin
Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King,
Geliang Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman,
Michael Ellerman, Stephen Rothwell, Stewart Smith.
Freescale updates from Scott:
- "Highlights include more 8xx optimizations, device tree updates,
and MVME7100 support."
PowerNV PCI hotplug from Gavin Shan:
- PCI: Add pcibios_setup_bridge()
- Override pcibios_setup_bridge()
- Remove PCI_RESET_DELAY_US
- Move pnv_pci_ioda_setup_opal_tce_kill() around
- Increase PE# capacity
- Allocate PE# in reverse order
- Create PEs in pcibios_setup_bridge()
- Setup PE for root bus
- Extend PCI bridge resources
- Make pnv_ioda_deconfigure_pe() visible
- Dynamically release PE
- Update bridge windows on PCI plug
- Delay populating pdn
- Support PCI slot ID
- Use PCI slot reset infrastructure
- Introduce pnv_pci_get_slot_id()
- Functions to get/set PCI slot state
- PCI/hotplug: PowerPC PowerNV PCI hotplug driver
- Print correct PHB type names
Power9 idle support from Shreyas B. Prabhu:
- set power_save func after the idle states are initialized
- Use PNV_THREAD_WINKLE macro while requesting for winkle
- make hypervisor state restore a function
- Rename idle_power7.S to idle_book3s.S
- Rename reusable idle functions to hardware agnostic names
- Make pnv_powersave_common more generic
- abstraction for saving SPRs before entering deep idle states
- Add platform support for stop instruction
- cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES
- cpuidle/powernv: cleanup cpuidle-powernv.c
- cpuidle/powernv: Add support for POWER ISA v3 idle states
- Use deepest stop state when cpu is offlined
Power9 PMU from Madhavan Srinivasan:
- factor out power8 pmu macros and defines
- factor out power8 pmu functions
- factor out power8 __init_pmu code
- Add power9 event list macros for generic and cache events
- Power9 PMU support
- Export Power9 generic and cache events to sysfs
Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt:
- Add XICS emulation APIs
- Move a few exception common handlers to make room
- Add support for HV virtualization interrupts
- Add mechanism to force a replay of interrupts
- Add ICP OPAL backend
- Discover IODA3 PHBs
- pci: Remove obsolete SW invalidate
- opal: Add real mode call wrappers
- Rename TCE invalidation calls
- Remove SWINV constants and obsolete TCE code
- Rework accessing the TCE invalidate register
- Fallback to OPAL for TCE invalidations
- Use the device-tree to get available range of M64's
- Check status of a PHB before using it
- pci: Don't try to allocate resources that will be reassigned
Other Power9:
- Send SIGBUS on unaligned copy and paste from Chris Smart
- Large Decrementer support from Oliver O'Halloran
- Load Monitor Register Support from Jack Miller
Performance improvements from Anton Blanchard:
- Avoid load hit store in __giveup_fpu() and __giveup_altivec()
- Avoid load hit store in setup_sigcontext()
- Remove assembly versions of strcpy, strcat, strlen and strcmp
- Align hot loops of some string functions
eBPF JIT from Naveen N. Rao:
- Fix/enhance 32-bit Load Immediate implementation
- Optimize 64-bit Immediate loads
- Introduce rotate immediate instructions
- A few cleanups
- Isolate classic BPF JIT specifics into a separate header
- Implement JIT compiler for extended BPF
Operator Panel driver from Suraj Jitindar Singh:
- devicetree/bindings: Add binding for operator panel on FSP machines
- Add inline function to get rc from an ASYNC_COMP opal_msg
- Add driver for operator panel on FSP machines
Sparse fixes from Daniel Axtens:
- make some things static
- Introduce asm-prototypes.h
- Include headers containing prototypes
- Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE
- kvm: Clarify __user annotations
- Pass endianness to sparse
- Make ppc_md.{halt, restart} __noreturn
MM fixes & cleanups from Aneesh Kumar K.V:
- radix: Update LPCR HR bit as per ISA
- use _raw variant of page table accessors
- Compile out radix related functions if RADIX_MMU is disabled
- Clear top 16 bits of va only on older cpus
- Print formation regarding the the MMU mode
- hash: Update SDR1 size encoding as documented in ISA 3.0
- radix: Update PID switch sequence
- radix: Update machine call back to support new HCALL.
- radix: Add LPID based tlb flush helpers
- radix: Add a kernel command line to disable radix
- Cleanup LPCR defines
Boot code consolidation from Benjamin Herrenschmidt:
- Move epapr_paravirt_early_init() to early_init_devtree()
- cell: Don't use flat device-tree after boot
- ge_imp3a: Don't use the flat device-tree after boot
- mpc85xx_ds: Don't use the flat device-tree after boot
- mpc85xx_rdb: Don't use the flat device-tree after boot
- Don't test for machine type in rtas_initialize()
- Don't test for machine type in smp_setup_cpu_maps()
- dt: Add of_device_compatible_match()
- Factor do_feature_fixup calls
- Move 64-bit feature fixup earlier
- Move 64-bit memory reserves to setup_arch()
- Use a cachable DART
- Move FW feature probing out of pseries probe()
- Put exception configuration in a common place
- Remove early allocation of the SMU command buffer
- Move MMU backend selection out of platform code
- pasemi: Remove IOBMAP allocation from platform probe()
- mm/hash: Don't use machine_is() early during boot
- Don't test for machine type to detect HEA special case
- pmac: Remove spurrious machine type test
- Move hash table ops to a separate structure
- Ensure that ppc_md is empty before probing for machine type
- Move 64-bit probe_machine() to later in the boot process
- Move 32-bit probe() machine to later in the boot process
- Get rid of ppc_md.init_early()
- Move the boot time info banner to a separate function
- Move setting of {i,d}cache_bsize to initialize_cache_info()
- Move the content of setup_system() to setup_arch()
- Move cache info inits to a separate function
- Re-order the call to smp_setup_cpu_maps()
- Re-order setup_panic()
- Make a few boot functions __init
- Merge 32-bit and 64-bit setup_arch()
Other new features:
- tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas
- tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas
- powerpc: Add module autoloading based on CPU features from Alastair D'Silva
- crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva
- Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt
- xmon: Dump ISA 2.06 SPRs from Michael Ellerman
- xmon: Dump ISA 2.07 SPRs from Michael Ellerman
- Add a parameter to disable 1TB segs from Oliver O'Halloran
- powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran
- Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli
- pseries: Add pseries hotplug workqueue from John Allen
- pseries: Add support for hotplug interrupt source from John Allen
- pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen
- pseries: Move property cloning into its own routine from Nathan Fontenot
- pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot
- pseries: Auto-online hotplugged memory from Nathan Fontenot
- pseries: Remove call to memblock_add() from Nathan Fontenot
cxl:
- Add set and get private data to context struct from Michael Neuling
- make base more explicitly non-modular from Paul Gortmaker
- Use for_each_compatible_node() macro from Wei Yongjun
- Frederic Barrat
- Abstract the differences between the PSL and XSL
- Make vPHB device node match adapter's
- Philippe Bergheaud
- Add mechanism for delivering AFU driver specific events
- Ignore CAPI adapters misplaced in switched slots
- Refine slice error debug messages
- Andrew Donnellan
- static-ify variables to fix sparse warnings
- PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
- PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state
- Add cxl_check_and_switch_mode() API to switch bi-modal cards
- remove dead Kconfig options
- fix potential NULL dereference in free_adapter()
- Ian Munsie
- Update process element after allocating interrupts
- Add support for CAPP DMA mode
- Fix allowing bogus AFU descriptors with 0 maximum processes
- Fix allocating a minimum of 2 pages for the SPA
- Fix bug where AFU disable operation had no effect
- Workaround XSL bug that does not clear the RA bit after a reset
- Fix NULL pointer dereference on kernel contexts with no AFU interrupts
- powerpc/powernv: Split cxl code out into a separate file
- Add cxl_slot_is_supported API
- Enable bus mastering for devices using CAPP DMA mode
- Move cxl_afu_get / cxl_afu_put to base
- Allow a default context to be associated with an external pci_dev
- Do not create vPHB if there are no AFU configuration records
- powerpc/powernv: Add support for the cxl kernel api on the real phb
- Add support for using the kernel API with a real PHB
- Add kernel APIs to get & set the max irqs per context
- Add preliminary workaround for CX4 interrupt limitation
- Add support for interrupts on the Mellanox CX4
- Workaround PE=0 hardware limitation in Mellanox CX4
- powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n
selftests:
- Test unaligned copy and paste from Chris Smart
- Load Monitor Register Tests from Jack Miller
- Cyril Bur
- exec() with suspended transaction
- Use signed long to read perf_event_paranoid
- Fix usage message in context_switch
- Fix generation of vector instructions/types in context_switch
- Michael Ellerman
- Use "Delta" rather than "Error" in normal output
- Import Anton's mmap & futex micro benchmarks
- Add a test for PROT_SAO"
* tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (263 commits)
powerpc/mm: Parenthesise IS_ENABLED() in if condition
tty/hvc: Use opal irqchip interface if available
tty/hvc: Use IRQF_SHARED for OPAL hvc consoles
selftests/powerpc: exec() with suspended transaction
powerpc: Improve comment explaining why we modify VRSAVE
powerpc/mm: Drop unused externs for hpte_init_beat[_v3]()
powerpc/mm: Rename hpte_init_lpar() and move the fallback to a header
powerpc/mm: Fix build break when PPC_NATIVE=n
crypto: vmx - Convert to CPU feature based module autoloading
powerpc: Add module autoloading based on CPU features
powerpc/powernv/ioda: Fix endianness when reading TCEs
powerpc/mm: Add memory barrier in __hugepte_alloc()
powerpc/modules: Never restore r2 for a mprofile-kernel style mcount() call
powerpc/ftrace: Separate the heuristics for checking call sites
powerpc: Merge 32-bit and 64-bit setup_arch()
powerpc/64: Make a few boot functions __init
powerpc: Re-order setup_panic()
powerpc: Re-order the call to smp_setup_cpu_maps()
powerpc/32: Move cache info inits to a separate function
powerpc/64: Move the content of setup_system() to setup_arch()
...
Pull smp hotplug updates from Thomas Gleixner:
"This is the next part of the hotplug rework.
- Convert all notifiers with a priority assigned
- Convert all CPU_STARTING/DYING notifiers
The final removal of the STARTING/DYING infrastructure will happen
when the merge window closes.
Another 700 hundred line of unpenetrable maze gone :)"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
timers/core: Correct callback order during CPU hot plug
leds/trigger/cpu: Move from CPU_STARTING to ONLINE level
powerpc/numa: Convert to hotplug state machine
arm/perf: Fix hotplug state machine conversion
irqchip/armada: Avoid unused function warnings
ARC/time: Convert to hotplug state machine
clocksource/atlas7: Convert to hotplug state machine
clocksource/armada-370-xp: Convert to hotplug state machine
clocksource/exynos_mct: Convert to hotplug state machine
clocksource/arm_global_timer: Convert to hotplug state machine
rcu: Convert rcutree to hotplug state machine
KVM/arm/arm64/vgic-new: Convert to hotplug state machine
smp/cfd: Convert core to hotplug state machine
x86/x2apic: Convert to CPU hotplug state machine
profile: Convert to hotplug state machine
timers/core: Convert to hotplug state machine
hrtimer: Convert to hotplug state machine
x86/tboot: Convert to hotplug state machine
arm64/armv8 deprecated: Convert to hotplug state machine
hwtracing/coresight-etm4x: Convert to hotplug state machine
...
Currently IS_ENABLED() produces an expression surrounded by parentheses,
which allows this code to compile, generating eg:
else if (1 || 0)
hpte_init_native();
However a change to the macro in the kbuild tree will break this in
future by removing the parentheses.
Fixes: 7353644fa9 ("powerpc/mm: Fix build break when PPC_NATIVE=n")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
hpte_init_lpar() is part of the pseries platform, so name it as such.
Move the fallback implementation for when PSERIES=n into the header,
dropping the weak implementation. The panic() is now handled by the
calling code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The recent commit to rework the hash MMU setup broke the build when
CONFIG_PPC_NATIVE=n. Fix it by adding an IS_ENABLED() check before
calling hpte_init_native().
Removing the else clause opens the possibility that we don't set any
ops, which would probably lead to a strange crash later. So add a check
that we correctly initialised at least one member of the struct.
Fixes: 166dd7d3fb ("powerpc/64: Move MMU backend selection out of platform code")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Install the callbacks via the state machine. On the boot cpu the callback is
invoked manually because cpuhp is not up yet and everything must be
preinitialized before additional CPUs are up.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Cc: Anton Blanchard <anton@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160718140727.GA13132@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
__hugepte_alloc() uses kmem_cache_zalloc() to allocate a zeroed PTE
and proceeds to use the newly allocated PTE. Add a memory barrier to
make sure that the other CPUs see a properly initialized PTE.
Based on a fix suggested by James Dykman.
Reported-by: James Dykman <jdykman@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: James Dykman <jdykman@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Moving probe_machine() to after mmu init will cause the ppc_md
fields relative to the hash table management to be overwritten.
Since we have essentially disconnected the machine type from
the hash backend ops, finish the job by moving them to a different
structure.
The only callback that didn't quite fix is update_partition_table
since this is not specific to hash, so I moved it to a standalone
variable for now. We can revisit later if needed.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Fix ppc64e build failure in kexec]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead, check for FW_FEATURE_SPLPAR. This should be roughtly equivalent
as all pseries machiens that can have an HEA also support SPLPAR and
no other machine type does.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the device-tree instead as we'll be moving probe_machine()
out of early_setup
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We move it into early_mmu_init() based on firmware features. For PS3,
we have to move the setting of these into early_init_devtree().
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of punching a hole in the linear mapping, just use normal
cachable memory, and apply the flush sequence documented in the
CPC625 (aka U3) user manual.
This allows us to remove quite a bit of code related to the early
allocation of the DART and the hole in the linear mapping. We can
also get rid of the copy of the DART for suspend/resume as the
original memory can just be saved/restored now, as long as we
properly sync the caches.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Integrate dart_init() fix to return ENODEV when DART disabled]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
It is seldom used in the kernel code and can be easily replaced by
either RELOCATABLE or PPC32. So there is no reason to keep a separate
kernel option for this.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We add a tlb flush variant, to flush LPID mappings.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This update the machine dep callback such that we can use the same
callback to register process table. The interface is updated such that
we can easily call H_REGISTER_PROC_TBL hcall. The HCALL itself is
introduced in a later patch.
No functionality change introduced by this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update the PID switch as per ISA doc. slbia is needed in radix to
invalidate any implementation specific lookaside information.
We use the .long format due to build errors with the below compiler
version.
gcc (Ubuntu 5.3.1-14ubuntu2.1) 5.3.1 20160413
GNU assembler (GNU Binutils for Ubuntu) 2.26
CC arch/powerpc/mm//mmu_context_book3s64.o
{standard input}: Assembler messages:
{standard input}:506: Error: junk at end of line: `0x7'
scripts/Makefile.build:291: recipe for target 'arch/powerpc/mm//mmu_context_book3s64.o' failed
make[1]: *** [arch/powerpc/mm//mmu_context_book3s64.o] Error 1
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
ISA 3.0 document hash table size in bytes = 2^(HTABSIZE + 18)
No functionality change by this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This helps in easily identifying the MMU mode with which the kernel
is operating.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As per ISA, we need to do this only for architecture version 2.02 and
earlier. This continued to work even for 2.07. But let's not do this for
anything after 2.02. ISA 3.0 requires these top bits to be not cleared.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PowerISA 3.0 requires the MMU mode (radix vs. hash) of the hypervisor
to be mirrored in the LPCR register, in addition to the partition table.
This is done to avoid fetching from the table when deciding, among other
things, how to perform transitions to HV mode on some interrupts.
So let's set it up appropriately
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The .longs with the shifts are harder to read, use more meaningful names
for the opcodes. PPC_TLBIE_5 is introduced for the 5 opcode variation of
the instruction due to an existing op-code for the 2 opcode variant.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- tm: Always reclaim in start_thread() for exec() class syscalls from Cyril Bur
- tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0 from Michael Neuling
- eeh: Fix wrong argument passed to eeh_rmv_device() from Gavin Shan
- Initialise pci_io_base as early as possible from Darren Stevens
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oEAY
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.7-5' into next
Pull in the fixes we sent during 4.7, we have code we want to merge into
next that depends on some of them.
CONFIG_PIN_TLB maps IMMR area and the first 24 Mbytes of memory.
In some circunstances it might be more interesting to not map
IMMR but map 32 Mbytes of memory instead.
Therefore we add config option CONFIG_PIN_TLB_IMMR to select if
IMMR shall be pinned or not, hence whether we pin 24 or 32 Mbytes of RAM
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
On recent kernels, with some debug options like for instance
CONFIG_LOCKDEP, the BSS requires more than 8M memory, allthough
the kernel code fits in the first 8M.
Today, it is necessary to activate CONFIG_PIN_TLB to get more than 8M
at startup, allthough pinning TLB is not necessary for that.
We could have inconditionaly mapped 16 or 24M bytes at startup
but some old hardware only have 8M and mapping non-existing RAM
would be an issue due to speculative accesses.
With the preceding patch however, the TLB entries are populated on
demand. By setting up the TLB miss handler to handle up to 24M until
the handler is patched for the entire memory space, it is possible
to allow access up to more memory without mapping non-existing RAM.
It is therefore not needed anymore to map memory data at all
at startup. It will be handled by the TLB miss handler.
One might still want to PIN the IMMR and the first 24M of RAM.
It is now possible to do it in the C memory initialisation
functions. In addition, we now know how much memory we have
when we do it, so we are able to adapt the pining to the
real amount of memory available. So boards with less than 24M
can now also benefit from PIN_TLB.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
Instead of using the first level page table to define mappings for
the linear memory space, we can use direct mapping from the TLB
handling routines. This has several advantages:
* No need to read the tables at each TLB miss
* No issue in 16k pages mode where the 1st level table maps 64 Mbytes
The size of the available linear space is known at system startup.
In order to avoid data access at each TLB miss to know the memory
size, the TLB routine is patched at startup with the proper size
This patch provides a 10%-15% improvment of TLB miss handling for
kernel addresses
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
Once the linear memory space has been mapped with 8Mb pages, as
seen in the related commit, we get 11 millions DTLB missed during
the reference 600s period. 77% of the misses are on user addresses
and 23% are on kernel addresses (1 fourth for linear address space
and 3 fourth for virtual address space)
Traditionaly, each driver manages one computer board which has its
own components with its own memory maps.
But on embedded chips like the MPC8xx, the SOC has all registers
located in the same IO area.
When looking at ioremaps done during startup, we see that
many drivers are re-mapping small parts of the IMMR for their own use
and all those small pieces gets their own 4k page, amplifying the
number of TLB misses: in our system we get 0xff000000 mapped 31 times
and 0xff003000 mapped 9 times.
Even if each part of IMMR was mapped only once with 4k pages, it would
still be several small mappings towards linear area.
This patch maps the IMMR with a single 512k page.
With this patch applied, the number of DTLB misses during the 10 min
period is reduced to 11.8 millions for a duration of 5.8s, which
represents 2% of the non-idle time hence yet another 10% reduction.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
For memory hotplug to work, the MMU code needs to provide the functions
create_section_mapping() and remove_section_mapping() to respectively
map and unmap portions of the linear mapping.
At the moment only hash64 provides these, so we provide weak stubs that
just error out. This fixes the build with configurations such as 64-bit
BookE with CONFIG_MEMORY_HOTPLUG enabled.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds the kernel command line parameter "no_tb_segs" which
forces the kernel to use 256MB rather than 1TB segments. Forcing the use
of 256MB segments makes it considerably easier to test code that depends
on an SLB miss occurring.
Suggested-by: Michael Neuling <mikey@neuling.org>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- tm: Always reclaim in start_thread() for exec() class syscalls from Cyril Bur
- tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0 from Michael Neuling
- eeh: Fix wrong argument passed to eeh_rmv_device() from Gavin Shan
- Initialise pci_io_base as early as possible from Darren Stevens
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oEAY
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- tm: Always reclaim in start_thread() for exec() class syscalls from
Cyril Bur
- tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0 from Michael
Neuling
- eeh: Fix wrong argument passed to eeh_rmv_device() from Gavin Shan
- Initialise pci_io_base as early as possible from Darren Stevens
* tag 'powerpc-4.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Initialise pci_io_base as early as possible
powerpc/tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0
powerpc/eeh: Fix wrong argument passed to eeh_rmv_device()
powerpc/tm: Always reclaim in start_thread() for exec() class syscalls
Commit d6a9996e84 ("powerpc/mm: vmalloc abstraction in preparation for
radix") turned kernel memory and IO addresses from #defined constants to
variables initialised at runtime.
On PA6T (pasemi) systems the setup_arch() machine call initialises the
onboard PCI-e root-ports, and uses pci_io_base to do this, which is now
before its value has been set, resulting in a panic early in boot before
console IO is initialised.
Move the pci_io_base initialisation to the same place as vmalloc ranges
are set (hash__early_init_mmu()/radix__early_init_mmu()) - this is the
earliest possible place we can initialise it.
Fixes: d6a9996e84 ("powerpc/mm: vmalloc abstraction in preparation for radix")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Add #ifdef CONFIG_PCI, massage change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- mm/radix: Update to tlb functions ric argument from Aneesh Kumar K.V
- mm/radix: Flush page walk cache when freeing page table from Aneesh Kumar K.V
- mm/hash: Use the correct PPP mask when updating HPTE from Aneesh Kumar K.V
- mm/hash: Don't add memory coherence if cache inhibited is set from Aneesh Kumar K.V
- mm/radix: Update Radix tree size as per ISA 3.0 from Aneesh Kumar K.V
- eeh: Fix invalid cached PE primary bus from Gavin Shan
- Fix faults caused by radix patching of SLB miss handler from Michael Ellerman
- bpf/jit: Disable classic BPF JIT on ppc64le from Naveen N. Rao
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fxml
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"mm/radix (Aneesh Kumar K.V):
- Update to tlb functions ric argument
- Flush page walk cache when freeing page table
- Update Radix tree size as per ISA 3.0
mm/hash (Aneesh Kumar K.V):
- Use the correct PPP mask when updating HPTE
- Don't add memory coherence if cache inhibited is set
eeh (Gavin Shan):
- Fix invalid cached PE primary bus
bpf/jit (Naveen N. Rao):
- Disable classic BPF JIT on ppc64le
.. and fix faults caused by radix patching of SLB miss handler
(Michael Ellerman)"
* tag 'powerpc-4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/bpf/jit: Disable classic BPF JIT on ppc64le
powerpc: Fix faults caused by radix patching of SLB miss handler
powerpc/eeh: Fix invalid cached PE primary bus
powerpc/mm/radix: Update Radix tree size as per ISA 3.0
powerpc/mm/hash: Don't add memory coherence if cache inhibited is set
powerpc/mm/hash: Use the correct PPP mask when updating HPTE
powerpc/mm/radix: Flush page walk cache when freeing page table
powerpc/mm/radix: Update to tlb functions ric argument
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
{pud,pmd}_alloc_one are allocating from {PGT,PUD}_CACHE initialized in
pgtable_cache_init which doesn't have larger than sizeof(void *) << 12
size and that fits into !costly allocation request size.
PGALLOC_GFP is used only in radix__pgd_alloc which uses either order-0
or order-4 requests. The first one doesn't need the flag while the
second does. Drop __GFP_REPEAT from PGALLOC_GFP and add it for the
order-4 one.
This means that this flag has never been actually useful here because it
has always been used only for PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-12-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the third version of the patchset previously sent [1]. I have
basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get
rid of superfluous gfp flags" which went through dm tree. I am sending
it now because it is tree wide and chances for conflicts are reduced
considerably when we want to target rc2. I plan to send the next step
and rename the flag and move to a better semantic later during this
release cycle so we will have a new semantic ready for 4.8 merge window
hopefully.
Motivation:
While working on something unrelated I've checked the current usage of
__GFP_REPEAT in the tree. It seems that a majority of the usage is and
always has been bogus because __GFP_REPEAT has always been about costly
high order allocations while we are using it for order-0 or very small
orders very often. It seems that a big pile of them is just a
copy&paste when a code has been adopted from one arch to another.
I think it makes some sense to get rid of them because they are just
making the semantic more unclear. Please note that GFP_REPEAT is
documented as
* __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt
* _might_ fail. This depends upon the particular VM implementation.
while !costly requests have basically nofail semantic. So one could
reasonably expect that order-0 request with __GFP_REPEAT will not loop
for ever. This is not implemented right now though.
I would like to move on with __GFP_REPEAT and define a better semantic
for it.
$ git grep __GFP_REPEAT origin/master | wc -l
111
$ git grep __GFP_REPEAT | wc -l
36
So we are down to the third after this patch series. The remaining
places really seem to be relying on __GFP_REPEAT due to large allocation
requests. This still needs some double checking which I will do later
after all the simple ones are sorted out.
I am touching a lot of arch specific code here and I hope I got it right
but as a matter of fact I even didn't compile test for some archs as I
do not have cross compiler for them. Patches should be quite trivial to
review for stupid compile mistakes though. The tricky parts are usually
hidden by macro definitions and thats where I would appreciate help from
arch maintainers.
[1] http://lkml.kernel.org/r/1461849846-27209-1-git-send-email-mhocko@kernel.org
This patch (of 19):
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations. Yet we
have the full kernel tree with its usage for apparently order-0
allocations. This is really confusing because __GFP_REPEAT is
explicitly documented to allow allocation failures which is a weaker
semantic than the current order-0 has (basically nofail).
Let's simply drop __GFP_REPEAT from those places. This would allow to
identify place which really need allocator to retry harder and formulate
a more specific semantic for what the flag is supposed to do actually.
Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Crispin <blogic@openwrt.org>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ISA 3.0 updated it to be encoded as Radix tree size = 2^(RTS + 31). We
have it encoded as 2^(RTS + 28). Add a helper with the correct encoding
and use it instead of opencoding.
Fixes: 2bfd65e45e ("powerpc/mm/radix: Add radix callbacks for early init routines")
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
H_ENTER hcall handling in qemu had assumptions that a cache inhibited
hpte entry won't have memory conference set. Also older kernel
mentioned that some version of pHyp required this (the code removed
by the below commit says:
/* Make pHyp happy */
if ((rflags & _PAGE_NO_CACHE) && !(rflags & _PAGE_WRITETHRU))
hpte_r &= ~HPTE_R_M;
But with older kernel we had some inconsistent memory conherence
mapping. We always enabled memory conherence in the page fault path and
removed memory conherence is _PAGE_NO_CACHE was set when we mapped the
page via htab_bolt_mapping. The commit mentioned below tried to
consolidate that by always enabling memory conherence. But as mentioned
above that breaks Qemu H_ENTER handling.
This patch update this such that we enable memory conherence only if
cache inhibited is not set and bring fault handling, lpar and bolt
mapping in sync.
Fixes: commit 30bda41aba4e("powerpc/mm: Drop WIMG in favour of new constant")
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The mm zone mechanism was traditionally used by arch specific code to
partition memory into allocation zones. However there are several zones
that are managed by the mm subsystem rather than the architecture. Most
architectures set the max PFN of these special zones to zero, however on
powerpc we set them to ~0ul. This, in conjunction with a bug in
free_area_init_nodes() results in all of system memory being placed in
ZONE_DEVICE when enabled. Device memory cannot be used for regular kernel
memory allocations so this will cause a kernel panic at boot. Given the
planned addition of more mm managed zones (ZONE_CMA) we should aim to be
consistent with every other architecture and set the max PFN for these
zones to zero.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
memory_hotplug_max() uses hot_add_drconf_memory_max() to get maxmimum
addressable memory by referring to ibm,dyanamic-memory property. There
are three problems with the current approach:
1 hot_add_drconf_memory_max() assumes that ibm,dynamic-memory includes
all the LMBs of the guest, but that is not true for PowerKVM which
populates only DR LMBs (LMBs that can be hotplugged/removed) in that
property.
2 hot_add_drconf_memory_max() multiplies lmb-size with lmb-count to arrive
at the max possible address. Since ibm,dynamic-memory doesn't include
RMA LMBs, the address thus obtained will be less than the actual max
address. For example, if max possible memory size is 32G, with lmb-size
of 256MB there can be 127 LMBs in ibm,dynamic-memory (1 LMB for RMA
which won't be present here). hot_add_drconf_memory_max() would then
return the max addressable memory as 127 * 256MB = 31.75GB, the max
address should have been 32G which is what ibm,lrdr-capacity shows.
3 In PowerKVM, there can be a gap between the end of boot time RAM and
beginning of hotplug RAM area. So just multiplying lmb-count with
lmb-size will not provide the correct max possible address for PowerKVM.
This patch fixes 1 by using ibm,lrdr-capacity property to return the max
addressable memory whenever the property is present. Then it fixes 2 & 3
by fetching the address of the last LMB in ibm,dynamic-memory property.
Fixes: cd34206e94 ("powerpc: Add memory_hotplug_max()")
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With commit e58e87adc8 "powerpc/mm: Update _PAGE_KERNEL_RO" we now
use all the three PPP bits. The top bit is now used to have a PPP value
of 0b110 which will be mapped to kernel read only. When updating the
hpte entry use right mask such that we update the 63rd bit (top 'P' bit)
too.
Prior to e58e87adc8 we didn't support KERNEL_RO at all (it was ==
KERNEL_RW), so this isn't a regression as such.
Fixes: e58e87adc8 ("powerpc/mm: Update _PAGE_KERNEL_RO")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Even though a tlb_flush() does a flush with invalidate all cache,
we can end up doing an RCU page table free before calling tlb_flush().
That means we can have page walk cache entries even after we free the
page table pages. This can result in us doing wrong page table walk.
Avoid this by doing pwc flush on every page table free. We can't batch
the pwc flush, because the rcu call back function where we free the
page table pages doesn't have information of the mmu gather. Thus we
have to do a pwc on every page table page freed.
Note: I also removed the dummy tlb_flush_pgtable call functions for
hash 32.
Fixes: 1a472c9dba ("powerpc/mm/radix: Add tlbflush routines")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Radix invalidate control (RIC) is used to control which cache to flush
using tlb instructions. When doing a PID flush, we currently flush
everything including page walk cache. For address range flush, we flush
only the TLB. In the next patch, we add support for flushing only the
page walk cache.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PowerISA 3.0 encodes the segment size in the second half of hash page
table entry. Update hpte_decode() accordingly.
Fixes: 50de596de8 ("powerpc/mm/hash: Add support for Power9 Hash")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In some of the radix TLB flush routines, we use a local to store the
mm->context.id, AKA the PID.
Currently we use an int, but the PID is unsigned long, so large values
of PID will be truncated. In particular MMU_NO_CONTEXT is -1, which
means all our comparisons against that value can never be true.
This means we'll issue TLB flushes when we shouldn't on radix enabled
machines.
Fix it by using an unsigned long for the local. Discovered by Coverity.
Fixes: 1a472c9dba ("powerpc/mm/radix: Add tlbflush routines")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Write change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This should not have any impact on hash, because hash does tlb
invalidate with every pte update and we don't implement
flush_tlb_* functions for hash. With radix we should make an explicit
call to flush tlb outside pte update.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we converted the asm routines to C functions, we missed updating
HPTE_R_R based on _PAGE_ACCESSED. ASM code used to copy over the lower
bits from pte via.
andi. r3,r30,0x1fe /* Get basic set of flags */
We also update the code such that we won't update the Change bit ('C'
bit) always. This was added by commit c5cf0e30bf ("powerpc: Fix
buglet with MMU hash management").
With hash64, we need to make sure that hardware doesn't do a pte update
directly. This is because we do end up with entries in TLB with no hash
page table entry. This happens because when we find a hash bucket full,
we "evict" a more/less random entry from it. When we do that we don't
invalidate the TLB (hpte_remove) because we assume the old translation
is still technically "valid". For more info look at commit
0608d692463("powerpc/mm: Always invalidate tlb on hpte invalidate and
update").
Thus it's critical that valid hash PTEs always have reference bit set
and writeable ones have change bit set. We do this by hashing a
non-dirty linux PTE as read-only and always setting _PAGE_ACCESSED (and
thus R) when hashing anything else in. Any attempt by Linux at clearing
those bits also removes the corresponding hash entry.
Commit 5cf0e30bf3d8 did that for 'C' bit by enabling 'C' bit always.
We don't really need to do that because we never map a RW pte entry
without setting 'C' bit. On READ fault on a RW pte entry, we still map
it READ only, hence a store update in the page will still cause a hash
pte fault.
This patch reverts the part of commit c5cf0e30bf ("[PATCH] powerpc:
Fix buglet with MMU hash management") and retain the updatepp part.
- If we hit the updatepp path on native, the old code without that
commit, would fail to set C bcause native_hpte_updatepp()
was implemented to filter the same bits as H_PROTECT and not let C
through thus we would "upgrade" a RO HPTE to RW without setting C
thus causing the bug. So the real fix in that commit was the change
to native_hpte_updatepp
Fixes: 89ff725051 ("powerpc/mm: Convert __hash_page_64K to C")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
LPCR cannot be updated when running in guest mode.
Fixes: 2bfd65e45e ("powerpc/mm/radix: Add radix callbacks for early init routines")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Highlights:
- Support for Power ISA 3.0 (Power9) Radix Tree MMU from Aneesh Kumar K.V
- Live patching support for ppc64le (also merged via livepatching.git)
Various cleanups & minor fixes from:
- Aaro Koskinen, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Chris Smart, Daniel Axtens, Frederic Barrat, Gavin Shan, Ian Munsie, Lennart
Sorensen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Michael
Ellerman, Oliver O'Halloran, Paul Gortmaker, Paul Mackerras, Rashmica Gupta,
Russell Currey, Suraj Jitindar Singh, Thiago Jung Bauermann, Valentin
Rothberg, Vipin K Parashar.
General:
- Update LMB associativity index during DLPAR add/remove from Nathan Fontenot
- Fix branching to OOL handlers in relocatable kernel from Hari Bathini
- Add support for userspace Power9 copy/paste from Chris Smart
- Always use STRICT_MM_TYPECHECKS from Michael Ellerman
- Add mask of possible MMU features from Michael Ellerman
PCI:
- Enable pass through of NVLink to guests from Alexey Kardashevskiy
- Cleanups in preparation for powernv PCI hotplug from Gavin Shan
- Don't report error in eeh_pe_reset_and_recover() from Gavin Shan
- Restore initial state in eeh_pe_reset_and_recover() from Gavin Shan
- Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell" from Guilherme G. Piccoli
- Remove the dependency on EEH struct in DDW mechanism from Guilherme G. Piccoli
selftests:
- Test cp_abort during context switch from Chris Smart
- Add several tests for transactional memory support from Rashmica Gupta
perf:
- Add support for sampling interrupt register state from Anju T
- Add support for unwinding perf-stackdump from Chandan Kumar
cxl:
- Configure the PSL for two CAPI ports on POWER8NVL from Philippe Bergheaud
- Allow initialization on timebase sync failures from Frederic Barrat
- Increase timeout for detection of AFU mmio hang from Frederic Barrat
- Handle num_of_processes larger than can fit in the SPA from Ian Munsie
- Ensure PSL interrupt is configured for contexts with no AFU IRQs from Ian Munsie
- Add kernel API to allow a context to operate with relocate disabled from Ian Munsie
- Check periodically the coherent platform function's state from Christophe Lombard
Freescale:
- Updates from Scott: "Contains 86xx fixes, minor device tree fixes, an erratum
workaround, and a kconfig dependency fix."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXPsGzAAoJEFHr6jzI4aWAVoAP/iKdrDe0eYHlVAE9SqnbsiZs
lgDxdsC8P3fsmP1G9o/HkKhC82zHl/La8Ztz8dtqa+LkSzbfliWP1ztJsI7GsBFo
tyCKzWnX9Rwvd3meHu/o/SQ29TNLm/PbPyyRqpj5QPbJ8XCXkAXR7ZZZqjvcMsJW
/AgIr7Cgf53tl9oZzzl/c7CnNHhMq+NBdA71vhWtUx+T97wfJEGyKW6HhZyHDbEU
iAki7fu77ZpEqC/Fh9swf0dCGBJ+a132NoMVo0AdV7EQLznUYlQpQEqa+1PyHZOP
/ArOzf2mDg6m3PfCo1eiB07v8PnVZ3llEUbVAJNg3GUxbE4SHrqq/kwm0iElm3p/
DvFxerCwdX9vmskJX4wDs+pSZRabXYj9XVMptsgFzA4joWrqqb7mBHqaort88YcY
YSljEt1bHyXmiJ+dBya40qARsWUkCVN7ZgEzdxckq0KI3w7g2tqpqIbO2lClWT6t
B3GpqQ4jp34+d1M14FB91fIGK7tMvOhSInE0Mv9+tPvRsepXqiiU/SwdAtRlr3m2
zs/K+4FYcVjJ3Rmpgc+tI38PbZxHe212I35YN6L1LP+4ZfAtzz0NyKdooTIBtkbO
19pX4WbBjKq8zK+YutrySncBIrbnI6VjW51vtRhgVKZliPFO/6zKagyU6FbxM+E5
udQES+t3F/9gvtxgxtDe
=YvyQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights:
- Support for Power ISA 3.0 (Power9) Radix Tree MMU from Aneesh Kumar K.V
- Live patching support for ppc64le (also merged via livepatching.git)
Various cleanups & minor fixes from:
- Aaro Koskinen, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Chris Smart, Daniel Axtens, Frederic Barrat, Gavin Shan, Ian Munsie,
Lennart Sorensen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring,
Michael Ellerman, Oliver O'Halloran, Paul Gortmaker, Paul Mackerras,
Rashmica Gupta, Russell Currey, Suraj Jitindar Singh, Thiago Jung
Bauermann, Valentin Rothberg, Vipin K Parashar.
General:
- Update LMB associativity index during DLPAR add/remove from Nathan
Fontenot
- Fix branching to OOL handlers in relocatable kernel from Hari Bathini
- Add support for userspace Power9 copy/paste from Chris Smart
- Always use STRICT_MM_TYPECHECKS from Michael Ellerman
- Add mask of possible MMU features from Michael Ellerman
PCI:
- Enable pass through of NVLink to guests from Alexey Kardashevskiy
- Cleanups in preparation for powernv PCI hotplug from Gavin Shan
- Don't report error in eeh_pe_reset_and_recover() from Gavin Shan
- Restore initial state in eeh_pe_reset_and_recover() from Gavin Shan
- Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell"
from Guilherme G Piccoli
- Remove the dependency on EEH struct in DDW mechanism from Guilherme
G Piccoli
selftests:
- Test cp_abort during context switch from Chris Smart
- Add several tests for transactional memory support from Rashmica
Gupta
perf:
- Add support for sampling interrupt register state from Anju T
- Add support for unwinding perf-stackdump from Chandan Kumar
cxl:
- Configure the PSL for two CAPI ports on POWER8NVL from Philippe
Bergheaud
- Allow initialization on timebase sync failures from Frederic Barrat
- Increase timeout for detection of AFU mmio hang from Frederic
Barrat
- Handle num_of_processes larger than can fit in the SPA from Ian
Munsie
- Ensure PSL interrupt is configured for contexts with no AFU IRQs
from Ian Munsie
- Add kernel API to allow a context to operate with relocate disabled
from Ian Munsie
- Check periodically the coherent platform function's state from
Christophe Lombard
Freescale:
- Updates from Scott: "Contains 86xx fixes, minor device tree fixes,
an erratum workaround, and a kconfig dependency fix."
* tag 'powerpc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (192 commits)
powerpc/86xx: Fix PCI interrupt map definition
powerpc/86xx: Move pci1 definition to the include file
powerpc/fsl: Fix build of the dtb embedded kernel images
powerpc/fsl: Fix rcpm compatible string
powerpc/fsl: Remove FSL_SOC dependency from FSL_LBC
powerpc/fsl-pci: Add a workaround for PCI 5 errata
powerpc/fsl: Fix SPI compatible on t208xrdb and t1040rdb
powerpc/powernv/npu: Add PE to PHB's list
powerpc/powernv: Fix insufficient memory allocation
powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism
Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell"
powerpc/eeh: Drop unnecessary label in eeh_pe_change_owner()
powerpc/eeh: Ignore handlers in eeh_pe_reset_and_recover()
powerpc/eeh: Restore initial state in eeh_pe_reset_and_recover()
powerpc/eeh: Don't report error in eeh_pe_reset_and_recover()
Revert "powerpc/powernv: Exclude root bus in pnv_pci_reset_secondary_bus()"
powerpc/powernv/npu: Enable NVLink pass through
powerpc/powernv/npu: Rework TCE Kill handling
powerpc/powernv/npu: Add set/unset window helpers
powerpc/powernv/ioda2: Export debug helper pe_level_printk()
...
The function is used to update the MMU with software PTE. It can
be called by data access exception handler (0x300) or instruction
access exception handler (0x400). If the function is called by
0x400 handler, the local variable @access is set to _PAGE_EXEC
to indicate the software PTE should have that flag set. When the
function is called by 0x300 handler, @access is set to zero.
This improves the readability of the function by replacing if
statements with switch. No logical changes introduced.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The zone that contains the top of memory will be either ZONE_NORMAL
or ZONE_HIGHMEM depending on the kernel config. There are two functions
that require this information and both of them use an #ifdef to set
a local variable (top_zone). This is a little silly so lets just make it
a constant.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Cc: linux-mm@kvack.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With Linux page size of 64K and hardware only supporting 4K HPTE, if we
use subpage protection, we always fail for the subpage 0 as shown
below (using the selftest subpage_prot test):
520175565: (4520111850): Failed at 0x3fffad4b0000 (p=13,sp=0,w=0), want=fault, got=pass !
4520890210: (4520826495): Failed at 0x3fffad5b0000 (p=29,sp=0,w=0), want=fault, got=pass !
4521574251: (4521510536): Failed at 0x3fffad6b0000 (p=45,sp=0,w=0), want=fault, got=pass !
4522258324: (4522194609): Failed at 0x3fffad7b0000 (p=61,sp=0,w=0), want=fault, got=pass !
This is because hash preload wrongly inserts the HPTE entry for subpage
0 without looking at the subpage protection information.
Fix it by teaching should_hash_preload() not to preload if we have
subpage protection configured for that range.
It appears this has been broken since it was introduced in 2008.
Fixes: fa28237cfc ("[POWERPC] Provide a way to protect 4k subpages when using 64k pages")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Rework into should_hash_preload() to avoid build fails w/SLICES=n]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently we have a check in hash_preload() against the psize, which is
only included when CONFIG_PPC_MM_SLICES is enabled. We want to expand
this check in a subsequent patch, so factor it out to allow that. As a
bonus it removes the #ifdef in the C code.
Unfortunately we can't put this in the existing CONFIG_PPC_MM_SLICES
block because it would require a forward declaration.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The usage in mm mmu_context_nohash.c is bogus, because we set the
context.id value to MMU_NO_CONTEXT 4 lines previously in the same
function, meaning slice_mm_new_context() will always be true.
The book3s 64 usage was removed in the previous commit. So remove it as
unused.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As part of the radix support we switched Book3s64 to use a value of ~0
for MMU_NO_CONTEXT. That is because id 0 is special on radix.
However that broke the logic in init_new_context(). The code there needs
to differentiate between a newly allocated context and one inherited via
fork. Previously it worked because a newly allocated context has an id
of zero (because it was just memset() to zero), which used to match
MMU_NO_CONTEXT, and therefore slice_mm_new_context() did the right
thing.
Instead check against a context.id value of zero instead of using
slice_mm_new_context().
Without this patch we never call slice_set_user_psize(), and end up with
a slice psize value of zero and we always end up using 4K HPTE.
Fixes: 1a472c9dba ("powerpc/mm/radix: Add tlbflush routines")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The deposited pgtable_t is a pte fragment hence we cannot use page->lru
for linking then together. We use the first two 64 bits for pte fragment
as list_head type to link all deposited fragments together. On withdraw
we properly zero then out.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Only code movement in this patch. No functionality change.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Radix doesn't use the slice framework to find the page size. Hence use
vma to find the page size.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In this patch we make the number of pte fragments per level 4 page table
page a variable. Radix level 4 table size is 256 bytes and hence we can
have 256 fragments per level 4 page. We don't update the fragment count
in this patch. We need to do performance measurements to find the right
value for fragment count.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With radix there is no MMU cache. Hence we don't need to do anything in
update_mmu_cache().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The vmalloc range differs between hash and radix config. Hence make
VMALLOC_START and related constants a variable which will be runtime
initialized depending on whether hash or radix mode is active.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Fix missing init of ioremap_bot in pgtable_64.c for ppc64e]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch switches 4K Linux page size config to use pte_t * type
instead of struct page * for pgtable_t. This simplifies the code a lot
and helps in consolidating both 64K and 4K page allocator routines. The
changes should not have any impact, because we already store physical
address in the upper level page table tree and that implies we already
do struct page * to physical address conversion.
One change to note here is we move the pgtable_page_dtor() call for
nohash to pte_fragment_free_mm(). The nohash related change is due to
the related changes in pgtable_64.c.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Only code cleanup. No functionality change.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Hash needs special get_unmapped_area() handling because of limitations
around base page size, so we have to set HAVE_ARCH_UNMAPPED_AREA.
With radix we don't have such restrictions, so we could use the generic
code. But because we've set HAVE_ARCH_UNMAPPED_AREA (for hash), we have
to re-implement the same logic as the generic code.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On return from RTAS we access the paca variables and we have 64 bit
disabled. This requires us to limit paca in 32 bit range.
Fix this by setting ppc64_rma_size to first_memblock_size/1G range.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Radix doesn't need slice support. Catch incorrect usage of slice code
when radix is enabled.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Core kernel doesn't track the page size of the VA range that we are
invalidating. Hence we end up flushing TLB for the entire mm here. Later
patches will improve this.
We also don't flush page walk cache separetly instead use RIC=2 when
flushing TLB, because we do a MMU gather flush after freeing page table.
MMU_NO_CONTEXT is updated for hash.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This file now contains both hash and radix specific code. Rename it to
indicate this better.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
How we switch MMU context differs between hash and radix. For hash we
need to switch the SLB details and for radix we need to switch the PID
SPR.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reza Arbab