I hit the following splat in my tests:
------------[ cut here ]------------
IRQs not enabled as expected
WARNING: CPU: 3 PID: 0 at kernel/time/tick-sched.c:982 tick_nohz_idle_enter+0x44/0x8c
Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6table_filter ip6_tables ipv6
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.0-rc2-test+ #2
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
EIP: tick_nohz_idle_enter+0x44/0x8c
Code: ec 05 00 00 00 75 26 83 b8 c0 05 00 00 00 75 1d 80 3d d0 36 3e c1 00
75 14 68 94 63 12 c1 c6 05 d0 36 3e c1 01 e8 04 ee f8 ff <0f> 0b 58 fa bb a0
e5 66 c1 e8 25 0f 04 00 64 03 1d 28 31 52 c1 8b
EAX: 0000001c EBX: f26e7f8c ECX: 00000006 EDX: 00000007
ESI: f26dd1c0 EDI: 00000000 EBP: f26e7f40 ESP: f26e7f38
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010296
CR0: 80050033 CR2: 0813c6b0 CR3: 2f342000 CR4: 001406f0
Call Trace:
do_idle+0x33/0x202
cpu_startup_entry+0x61/0x63
start_secondary+0x18e/0x1ed
startup_32_smp+0x164/0x168
irq event stamp: 18773830
hardirqs last enabled at (18773829): [<c040150c>] trace_hardirqs_on_thunk+0xc/0x10
hardirqs last disabled at (18773830): [<c040151c>] trace_hardirqs_off_thunk+0xc/0x10
softirqs last enabled at (18773824): [<c0ddaa6f>] __do_softirq+0x25f/0x2bf
softirqs last disabled at (18773767): [<c0416bbe>] call_on_stack+0x45/0x4b
---[ end trace b7c64aa79e17954a ]---
After a bit of debugging, I found what was happening. This would trigger
when performing "perf" with a high NMI interrupt rate, while enabling and
disabling function tracer. Ftrace uses breakpoints to convert the nops at
the start of functions to calls to the function trampolines. The breakpoint
traps disable interrupts and this makes calls into lockdep via the
trace_hardirqs_off_thunk in the entry.S code. What happens is the following:
do_idle {
[interrupts enabled]
<interrupt> [interrupts disabled]
TRACE_IRQS_OFF [lockdep says irqs off]
[...]
TRACE_IRQS_IRET
test if pt_regs say return to interrupts enabled [yes]
TRACE_IRQS_ON [lockdep says irqs are on]
<nmi>
nmi_enter() {
printk_nmi_enter() [traced by ftrace]
[ hit ftrace breakpoint ]
<breakpoint exception>
TRACE_IRQS_OFF [lockdep says irqs off]
[...]
TRACE_IRQS_IRET [return from breakpoint]
test if pt_regs say interrupts enabled [no]
[iret back to interrupt]
[iret back to code]
tick_nohz_idle_enter() {
lockdep_assert_irqs_enabled() [lockdep say no!]
Although interrupts are indeed enabled, lockdep thinks it is not, and since
we now do asserts via lockdep, it gives a false warning. The issue here is
that printk_nmi_enter() is called before lockdep_off(), which disables
lockdep (for this reason) in NMIs. By simply not allowing ftrace to see
printk_nmi_enter() (via notrace annotation) we keep lockdep from getting
confused.
Cc: stable@vger.kernel.org
Fixes: 42a0bb3f71 ("printk/nmi: generic solution for safe printk in NMI")
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbkHDZAAoJEEg/ir3gV/o+X8MH/2STl828uBTkYNwxWOz9szWm
xkMs9pEQzTNjPGoVNhTVStA3TdeyPOQccRh8JBykJstSmFD37OAaIsvGmmRfetKi
wb0JFi9QzNt47hJKX8DLbif3oUh1KmFpVStT4D9eAWNK0ke5Rn4qiUm43T6WejDk
1r7W8j5ZNUbhfdEj5jMYc3H8sZFNcyTxiFGmZSlovnV6JWMZdIOnwmd+VghPxbSE
27dN7cpVRxh+wpEmZVVRyQULe0WgXE/CQ/xU9efkroabwGpjs6ivU10QpBOFJ8Js
c/+muwKNMPG6n4wxblUSwXshLmKXLiKXPnC6iNNf9+Q77F8gL37DcsVHKGPYrho=
=NhLj
-----END PGP SIGNATURE-----
Merge tag 'mlx5e-fixes-2018-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2018-09-05
This pull request contains some fixes for mlx5 etherent netdevice and
core driver.
Please pull and let me know if there's any problem.
For -stable v4.9:
('net/mlx5: Fix debugfs cleanup in the device init/remove flow')
For -stable v4.12:
("net/mlx5: E-Switch, Fix memory leak when creating switchdev mode FDB tables")
For -stable v4.13:
("net/mlx5: Fix use-after-free in self-healing flow")
For -stable v4.14:
("net/mlx5: Check for error in mlx5_attach_interface")
For -stable v4.15:
("net/mlx5: Fix not releasing read lock when adding flow rules")
For -stable v4.17:
("net/mlx5: Fix possible deadlock from lockdep when adding fte to fg")
For -stable v4.18:
("net/mlx5: Use u16 for Work Queue buffer fragment size")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Raydium touchscreen triggers interrupt storm after system-wide suspend:
[ 179.085033] i2c_hid i2c-CUST0000:00: i2c_hid_get_input: incomplete report (58/65535)
According to Raydium, Windows driver does not reset the device after system
resume.
The HID over I2C spec does specify a reset should be used at intialization, but
it doesn't specify if reset is required for system suspend.
Tested this patch on other i2c-hid touchpanels I have and those touchpanels do
work after S3 without doing reset. If any regression happens to other
touchpanel vendors, we can use quirk for Raydium devices.
There's still one device uses I2C_HID_QUIRK_RESEND_REPORT_DESCR so keep it
there.
Cc: Aaron Ma <aaron.ma@canonical.com>
Cc: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If parent_get class method is not supported by the OSDs, fall back to
the legacy class method and assume that the parent is in the default
(i.e. "") namespace. The "use the child's image namespace" workaround
is no longer needed because creating images within namespaces will
require parent_get aware OSDs.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
In preparation for the new parent_get and parent_overlap_get class
methods, factor out the fetching and decoding of parent data.
As a side effect, we now decode all four fields in the "no parent"
case.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
syzbot reported a use-after-free in ceph_destroy_options(), called from
ceph_mount(). The problem was that create_fs_client() consumed the opt
pointer on some errors, but not on all of them. Make sure it always
consumes both libceph and ceph options.
Reported-by: syzbot+8ab6f1042021b4eed062@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
When a teardown callback fails, the CPU hotplug code brings the CPU back to
the previous state. The previous state becomes the new target state. The
rollback happens in undo_cpu_down() which increments the state
unconditionally even if the state is already the same as the target.
As a consequence the next CPU hotplug operation will start at the wrong
state. This is easily to observe when __cpu_disable() fails.
Prevent the unconditional undo by checking the state vs. target before
incrementing state and fix up the consequently wrong conditional in the
unplug code which handles the failure of the final CPU take down on the
control CPU side.
Fixes: 4dddfb5faa ("smp/hotplug: Rewrite AP state machine core")
Reported-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: josh@joshtriplett.org
Cc: peterz@infradead.org
Cc: jiangshanlai@gmail.com
Cc: dzickus@redhat.com
Cc: brendan.jackman@arm.com
Cc: malat@debian.org
Cc: sramana@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1809051419580.1416@nanos.tec.linutronix.de
----
When the kernel.print-fatal-signals sysctl has been enabled, a simple
userspace crash will cause the kernel to write a crash dump that contains,
among other things, the kernel gsbase into dmesg.
As suggested by Andy, limit output to pt_regs, FS_BASE and KERNEL_GS_BASE
in this case.
This also moves the bitness-specific logic from show_regs() into
process_{32,64}.c.
Fixes: 45807a1df9 ("vdso: print fatal signals")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180831194151.123586-1-jannh@google.com
Loops per jiffy is calculated by multiplying tsc_khz with 1e3 and then
dividing it by HZ.
Both tsc_khz and the temporary variable holding the multiplication result
are of type unsigned long, so on 32bit the result is truncated to the lower
32bit.
Use u64 as type for the temporary variable and cast tsc_khz to it before
multiplying.
[ tglx: Massaged changelog and removed pointless braces ]
Fixes: cf7a63ef4e ("x86/tsc: Calibrate tsc only once")
Signed-off-by: Chuanhua Lei <chuanhua.lei@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: yixin.zhu@linux.intel.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@microsoft.com>
Cc: Rajvi Jingar <rajvi.jingar@intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Link: https://lkml.kernel.org/r/1536228203-18701-1-git-send-email-chuanhua.lei@linux.intel.com
Commit 12864ff854 (ACPI / LPSS: Avoid PM quirks on suspend and resume
from hibernation) bypasses lpss quirks for S3 and S4, by setting a flag
for S3/S4 in acpi_lpss_suspend(), and check that flag in
acpi_lpss_resume().
But this overlooks the boot case where acpi_lpss_resume() may get called
without a corresponding acpi_lpss_suspend() having been called.
Thus force setting the flag during boot.
Fixes: 12864ff854 (ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200989
Reported-and-tested-by: William Lieurance <william.lieurance@namikoda.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+: 12864ff854 (ACPI / LPSS: Avoid ...)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Calling dmi_check_system() early only works on X86. Other
architectures initialize the DMI subsystem later so it's not
ready yet when ACPI itself gets initialized.
In the best case it results in a useless call to a function which
will do nothing. But depending on the dmi implementation, it could
also result in warnings. Best is to not call the function when it
can't work and isn't needed.
Additionally, if anyone ever needs to add non-x86 quirks, it would
surprisingly not work, so document the limitation to avoid confusion.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: cce4f632db (ACPI: fix early DSDT dmi check warnings on ia64)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Julian Wiedmann says:
====================
net/iucv: fixes 2018-09-05
please apply three straight-forward fixes for iucv. One that prevents
leaking the skb on malformed inbound packets, one to fix the error
handling on transmit error, and one to get rid of a compile warning.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When sending an skb, afiucv_hs_send() bails out on various error
conditions. But currently the caller has no way of telling whether the
skb was freed or not - resulting in potentially either
a) leaked skbs from iucv_send_ctrl(), or
b) double-free's from iucv_sock_sendmsg().
As dev_queue_xmit() will always consume the skb (even on error), be
consistent and also free the skb from all other error paths. This way
callers no longer need to care about managing the skb.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inbound packets may have any combination of flag bits set in their iucv
header. If we don't know how to handle a specific combination, drop the
skb instead of leaking it.
To clarify what error is returned in this case, replace the hard-coded
0 with the corresponding macro.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If users try to install act_tunnel_key 'set' rules with duplicate values
of 'index', the tunnel metadata are allocated, but never released. Then,
kmemleak complains as follows:
# tc a a a tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 index 111
# echo clear > /sys/kernel/debug/kmemleak
# tc a a a tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 index 111
Error: TC IDR already exists.
We have an error talking to the kernel
# echo scan > /sys/kernel/debug/kmemleak
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff8800574e6c80 (size 256):
comm "tc", pid 5617, jiffies 4298118009 (age 57.990s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 1c e8 b0 ff ff ff ff ................
81 24 c2 ad ff ff ff ff 00 00 00 00 00 00 00 00 .$..............
backtrace:
[<00000000b7afbf4e>] tunnel_key_init+0x8a5/0x1800 [act_tunnel_key]
[<000000007d98fccd>] tcf_action_init_1+0x698/0xac0
[<0000000099b8f7cc>] tcf_action_init+0x15c/0x590
[<00000000dc60eebe>] tc_ctl_action+0x336/0x5c2
[<000000002f5a2f7d>] rtnetlink_rcv_msg+0x357/0x8e0
[<000000000bfe7575>] netlink_rcv_skb+0x124/0x350
[<00000000edab656f>] netlink_unicast+0x40f/0x5d0
[<00000000b322cdcb>] netlink_sendmsg+0x6e8/0xba0
[<0000000063d9d490>] sock_sendmsg+0xb3/0xf0
[<00000000f0d3315a>] ___sys_sendmsg+0x654/0x960
[<00000000c06cbd42>] __sys_sendmsg+0xd3/0x170
[<00000000ce72e4b0>] do_syscall_64+0xa5/0x470
[<000000005caa2d97>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000fac1b476>] 0xffffffffffffffff
This problem theoretically happens also in case users attempt to setup a
geneve rule having wrong configuration data, or when the kernel fails to
allocate 'params_new'. Ensure that tunnel_key_init() releases the tunnel
metadata also in the above conditions.
Addresses-Coverity-ID: 1373974 ("Resource leak")
Fixes: d0f6dd8a91 ("net/sched: Introduce act_tunnel_key")
Fixes: 0ed5269f9e ("net/sched: add tunnel option support to act_tunnel_key")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before we unlock the sock in tipc_release(), we have to
detach sk->sk_socket from sk, otherwise a parallel
tipc_sk_fill_sock_diag() could stil read it after we
free this socket.
Fixes: c30b70deb5 ("tipc: implement socket diagnostics for AF_TIPC")
Reported-and-tested-by: syzbot+48804b87c16588ad491d@syzkaller.appspotmail.com
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a false positive report due to incorrect nested lock
annotations as we lock multiple fgs with the same subclass.
Instead of locking all fgs only lock the one being used as was
done before.
Fixes: bd71b08ec2 ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Copy and paste bug was introduced in the offending patch.
We need to write udp source port value into the headers value and not
headers criteria "mask".
Fixes: 142644f8a1 ("net/mlx5e: Ethtool steering flow parsing refactoring")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently, mlx5_attach_interface does not check for error
after calling intf->attach or intf->add. When these two calls
fails, the client is not initialized and will cause issues such as
kernel panic on invalid address in the teardown path (mlx5_detach_interface)
Fixes: 737a234bb6 ("net/mlx5: Introduce attach/detach to interface API")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The PCI BDF is not unique. PCI domain must also be considered when
searching for the next physical device during lag setup. Example below:
mlx5_core 0000:01:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0)
mlx5_core 0000:01:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0)
mlx5_core 0001:01:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0)
mlx5_core 0001:01:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0)
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
If building match list fg fails and we never jumped to
search_again_locked label then the function returned without
unlocking the read lock.
Fixes: bd71b08ec2 ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The memory allocated for the slow path table flow group input structure
was not freed upon successful return, fix that.
Fixes: 1967ce6ea5 ("net/mlx5: E-Switch, Refactor fast path FDB table creation in switchdev mode")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Minimal stride size is 16.
Hence, the number of strides in a fragment (of PAGE_SIZE)
is <= PAGE_SIZE / 16 <= 4K.
u16 is sufficient to represent this.
Fixes: d7037ad73d ("net/mlx5: Fix QP fragmented buffer allocation")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Minimal stride size is 16.
Hence, the number of strides in a fragment (of PAGE_SIZE)
is <= PAGE_SIZE / 16 <= 4K.
u16 is sufficient to represent this.
Fixes: 388ca8be00 ("IB/mlx5: Implement fragmented completion queue (CQ)")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When initializing the device (procedure init_one), the driver
calls mlx5_pci_init to perform pci initialization. As part of this
initialization, mlx5_pci_init creates a debugfs directory.
If this creation fails, init_one aborts, returning failure to
the caller (which is the probe method caller).
The main reason for such a failure to occur is if the debugfs
directory already exists. This can happen if the last time
mlx5_pci_close was called, debugfs_remove (silently) failed due
to the debugfs directory not being empty.
Guarantee that such a debugfs_remove failure will not occur by
instead calling debugfs_remove_recursive in procedure mlx5_pci_close.
Fixes: 59211bd3b6 ("net/mlx5: Split the load/unload flow into hardware and software flows")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When the mlx5 health mechanism detects a problem while the driver
is in the middle of init_one or remove_one, the driver needs to prevent
the health mechanism from scheduling future work; if future work
is scheduled, there is a problem with use-after-free: the system WQ
tries to run the work item (which has been freed) at the scheduled
future time.
Prevent this by disabling work item scheduling in the health mechanism
when the driver is in the middle of init_one() or remove_one().
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
If ib_uverbs_create_uapi() fails, dev_num should be freed from the bitmap.
Fixes: 7d96c9b176 ("IB/uverbs: Have the core code create the uverbs_root_spec")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It is possible to call fsync on a read-only handle (for example, fsck.ext2
does it when doing read-only check), and this call results in kernel
warning.
The patch b089cfd95d ("block: don't warn for flush on read-only device")
attempted to disable the warning, but it is buggy and it doesn't
(op_is_flush tests flags, but bio_op strips off the flags).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 721c7fc701 ("block: fail op_is_write() requests to read-only partitions")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Jens Axboe <axboe@kernel.dk>
1. DMA-able memory allocated for Shadow QP was not being freed.
2. bnxt_qplib_alloc_qp_hdr_buf() had a bug wherein the SQ pointer was
erroneously pointing to the RQ. But since the corresponding
free_qp_hdr_buf() was correct, memory being free was less than what was
allocated.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Inside of start_xmit() the call to check if the connection is up and the
queueing of the packets for later transmission is not atomic which leaves
a window where cm_rep_handler can run, set the connection up, dequeue
pending packets and leave the subsequently queued packets by start_xmit()
sitting on neigh->queue until they're dropped when the connection is torn
down. This only applies to connected mode. These dropped packets can
really upset TCP, for example, and cause multi-minute delays in
transmission for open connections.
Here's the code in start_xmit where we check to see if the connection is
up:
if (ipoib_cm_get(neigh)) {
if (ipoib_cm_up(neigh)) {
ipoib_cm_send(dev, skb, ipoib_cm_get(neigh));
goto unref;
}
}
The race occurs if cm_rep_handler execution occurs after the above
connection check (specifically if it gets to the point where it acquires
priv->lock to dequeue pending skb's) but before the below code snippet in
start_xmit where packets are queued.
if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) {
push_pseudo_header(skb, phdr->hwaddr);
spin_lock_irqsave(&priv->lock, flags);
__skb_queue_tail(&neigh->queue, skb);
spin_unlock_irqrestore(&priv->lock, flags);
} else {
++dev->stats.tx_dropped;
dev_kfree_skb_any(skb);
}
The patch acquires the netif tx lock in cm_rep_handler for the section
where it sets the connection up and dequeues and retransmits deferred
skb's.
Fixes: 839fcaba35 ("IPoIB: Connected mode experimental support")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Knister <aaron.s.knister@nasa.gov>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The raspberrypi-hwmon driver doesn't automatically load, although it does work
when loaded, by adding the alias it auto loads as expected when built as a
module. Tested on RPi2/RPi3 on 32 bit kernel and RPi3B+ on aarch64 with
Fedora 28 and a patched 4.18 RC kernel.
Fixes: 3c493c885cf ("hwmon: Add support for RPi voltage sensor")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
CC: Stefan Wahren <stefan.wahren@i2se.com>
CC: Eric Anholt <eric@anholt.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
- Atomic contexts, cansleep* calls and such fastpath/slopwpath
things.
- Defer ACPI event handler registration to late_initcall()
so IRQs do not fire in our face before other drivers have
a chance to register handlers.
- Race condition if a consumer requests a GPIO after
gpiochip_add_data_with_key() but before of_gpiochip_add()
- Probe errorpath in the dwapb driver.
-----BEGIN PGP SIGNATURE-----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=fXnt
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes. The ACPI stuff is probably the most annoying for
users that get fixed this time.
- Atomic contexts, cansleep* calls and such fastpath/slopwpath
things.
- Defer ACPI event handler registration to late_initcall() so IRQs do
not fire in our face before other drivers have a chance to register
handlers.
- Race condition if a consumer requests a GPIO after
gpiochip_add_data_with_key() but before of_gpiochip_add()
- Probe errorpath in the dwapb driver"
* tag 'gpio-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Fix crash due to registration race
gpio: dwapb: Fix error handling in dwapb_gpio_probe()
gpiolib-acpi: Register GpioInt ACPI event handlers from a late_initcall
gpiolib: acpi: Switch to cansleep version of GPIO library call
gpio: adp5588: Fix sleep-in-atomic-context bug
A set of very minor fixes and a couple of reverts to fix a major
problem (the attempt to change the busy count causes a hang when
attempting to change the drive cache type).
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW4+QYSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbWyAP9VjOlI
8VOvkoWvHxGzN9m3DXnv6CVbNcqXC+7g8BYQmgD9HhFKrhfQXtwL+VT4k4G2K6l0
cVDMH3cUMMFhRxKR5DM=
=DYnk
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A set of very minor fixes and a couple of reverts to fix a major
problem (the attempt to change the busy count causes a hang when
attempting to change the drive cache type)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: aacraid: fix a signedness bug
Revert "scsi: core: avoid host-wide host_busy counter for scsi_mq"
Revert "scsi: core: fix scsi_host_queue_ready"
scsi: libata: Add missing newline at end of file
scsi: target: iscsi: cxgbit: use pr_debug() instead of pr_info()
scsi: hpsa: limit transfer length to 1MB, not 512kB
scsi: lpfc: Correct MDS diag and nvmet configuration
scsi: lpfc: Default fdmi_on to on
scsi: csiostor: fix incorrect port capabilities
scsi: csiostor: add a check for NULL pointer after kmalloc()
scsi: documentation: add scsi_mod.use_blk_mq to scsi-parameters
scsi: core: Update SCSI_MQ_DEFAULT help text to match default
Here is the nds32 patch set based on 4.19-rc2.
Contained in here are the bug fixes, building error fixes and ftrace support
for nds32.
These are the LTP20170427 testing results.
Total Tests: 1902
Total Skipped Tests: 592
Total Failures: 420
Kernel Version: 4.19.0-rc2-00018-g2c9d30cc16f0-dirty
Machine Architecture: nds32
Signed-off-by: Greentime Hu <greentime@andestech.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.17 (GNU/Linux)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=DJCS
-----END PGP SIGNATURE-----
Merge tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux
Pull nds32 updates from Greentime Hu:
"Contained in here are the bug fixes, building error fixes and ftrace
support for nds32"
* tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
nds32: linker script: GCOV kernel may refers data in __exit
nds32: fix build error because of wrong semicolon
nds32: Fix a kernel panic issue because of wrong frame pointer access.
nds32: Only print one page of stack when die to prevent printing too much information.
nds32: Add macro definition for offset of lp register on stack
nds32: Remove the deprecated ABI implementation
nds32/stack: Get real return address by using ftrace_graph_ret_addr
nds32/ftrace: Support dynamic function graph tracer
nds32/ftrace: Support dynamic function tracer
nds32/ftrace: Add RECORD_MCOUNT support
nds32/ftrace: Support static function graph tracer
nds32/ftrace: Support static function tracer
nds32: Extract the checking and getting pointer to a macro
nds32: Clean up the coding style
nds32: Fix get_user/put_user macro expand pointer problem
nds32: Fix empty call trace
nds32: add NULL entry to the end of_device_id array
nds32: fix logic for module
Borislav reported the following splat:
=============================
WARNING: suspicious RCU usage
4.19.0-rc1+ #1 Not tainted
-----------------------------
./include/linux/rcupdate.h:631 rcu_read_lock() used illegally while idle!
other info that might help us debug this:
RCU used illegally from idle CPU!
rcu_scheduler_active = 2, debug_locks = 1
RCU used illegally from extended quiescent state!
1 lock held by swapper/0/0:
#0: 000000004557ee0e (rcu_read_lock){....}, at: perf_event_output_forward+0x0/0x130
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0-rc1+ #1
Hardware name: LENOVO 2320CTO/2320CTO, BIOS G2ET86WW (2.06 ) 11/13/2012
Call Trace:
dump_stack+0x85/0xcb
perf_event_output_forward+0xf6/0x130
__perf_event_overflow+0x52/0xe0
perf_swevent_overflow+0x91/0xb0
perf_tp_event+0x11a/0x350
? find_held_lock+0x2d/0x90
? __lock_acquire+0x2ce/0x1350
? __lock_acquire+0x2ce/0x1350
? retint_kernel+0x2d/0x2d
? find_held_lock+0x2d/0x90
? tick_nohz_get_sleep_length+0x83/0xb0
? perf_trace_cpu+0xbb/0xd0
? perf_trace_buf_alloc+0x5a/0xa0
perf_trace_cpu+0xbb/0xd0
cpuidle_enter_state+0x185/0x340
do_idle+0x1eb/0x260
cpu_startup_entry+0x5f/0x70
start_kernel+0x49b/0x4a6
secondary_startup_64+0xa4/0xb0
This is due to the tracepoints moving to SRCU usage which does not require
RCU to be "watching". But perf uses these tracepoints with RCU and expects
it to be. Hence, we still need to add in the rcu_irq_enter/exit_irqson()
calls for "rcuidle" tracepoints. This is a temporary fix until we have SRCU
working in NMI context, and then perf can be converted to use that instead
of normal RCU.
Link: http://lkml.kernel.org/r/20180904162611.6a120068@gandalf.local.home
Cc: x86-ml <x86@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Fixes: e6753f23d9 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
With performance optimization the spi transfer and messages of basic
register operations like qcaspi_read_register moved into the private
driver structure. But they weren't protected against mutual access
(e.g. between driver kthread and ethtool). So dumping the QCA7000
registers via ethtool during network traffic could make spi_sync
hang forever, because the completion in spi_message is overwritten.
So revert the optimization completely.
Fixes: 291ab06ecf ("net: qualcomm: new Ethernet over SPI driver for QCA700")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DMA allocated memory is lost in be_cmd_get_profile_config() when we
call it with non-NULL port_res parameter.
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MC-aware mode was recently enabled by mlxsw on Spectrum switches in
commit 7b81953066 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw
ports"). Unfortunately, testing has shown that the fix is incomplete and
in the presented form actually makes the problem even worse, because any
amount of MC traffic causes UC disruption.
The reason for this is that currently, mlxsw configures the MC-specific
TCs (8..15) to map to pool 0. It also configures a maximum buffer size
of 0, but for MC traffic that maximum is disregarded and not part of the
quota. Therefore MC traffic is always admitted to the egress buffer.
Fix the configuration by directing the MC TCs into pool 15, which is
dedicated to MC traffic and recognized as such by the silicon.
Fixes: 7b81953066 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit b0f847e16c ("HID: hid-sensor-hub: Force logical minimum to 1 for
power and report state") not only replaced the descriptor fixup done for
devices with the HID_SENSOR_HUB_ENUM_QUIRK with a generic fix, but also
accidentally removed the unrelated descriptor fixup for the Lenovo ThinkPad
Helix 2 sensor hub. This commit restores this fixup.
Restoring this fixup not only fixes the Lenovo ThinkPad Helix 2's sensors,
but also the Lenovo ThinkPad 8's sensors.
Fixes: b0f847e16c ("HID: hid-sensor-hub: Force logical minimum ...")
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Fernando D S Lima <fernandodsl@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is a NULL pointer dereference in case memory resources
for *parse* are not successfully allocated.
Fix this by adding a new goto label and make the execution
path jump to it in case vzalloc() fails.
Addresses-Coverity-ID: 1473081 ("Dereference after null check")
Fixes: b2dd9f2e5a ("HID: core: fix memory leak on probe")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch is used to fix nds32 allmodconfig/allyesconfig build error
because GCOV kernel embeds counters in the kernel for each line
and a part of that embed in __exit text. So we need to keep the
EXIT_TEXT and EXIT_DATA if CONFIG_GCOV_KERNEL=y.
Link: https://lkml.org/lkml/2018/9/1/125
Signed-off-by: Greentime Hu <greentime@andestech.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
setup_initrd() overwrites initrd_start and initrd_end if __initramfs_size
is larger than 0, which is always true even if there is no embedded
initramfs. This prevents booting qemu with "-initrd" parameter.
Overwriting initrd_start and initrd_end is not necessary since
__initramfs_start and __initramfs_size are used directly in
populate_rootfs() to load the built-in initramfs, so just drop
that code.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
nilfs2: convert to SPDX license tags
drivers/dax/device.c: convert variable to vm_fault_t type
lib/Kconfig.debug: fix three typos in help text
checkpatch: add __ro_after_init to known $Attribute
mm: fix BUG_ON() in vmf_insert_pfn_pud() from VM_MIXEDMAP removal
uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name
memory_hotplug: fix kernel_panic on offline page processing
checkpatch: add optional static const to blank line declarations test
ipc/shm: properly return EIDRM in shm_lock()
mm/hugetlb: filter out hugetlb pages if HUGEPAGE migration is not supported.
mm/util.c: improve kvfree() kerneldoc
tools/vm/page-types.c: fix "defined but not used" warning
tools/vm/slabinfo.c: fix sign-compare warning
kmemleak: always register debugfs file
mm: respect arch_dup_mmap() return value
mm, oom: fix missing tlb_finish_mmu() in __oom_reap_task_mm().
mm: memcontrol: print proper OOM header when no eligible victim left
Remove the verbose license text from NILFS2 files and replace them with
SPDX tags. This does not change the license of any of the code.
Link: http://lkml.kernel.org/r/1535624528-5982-1-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As part of 226ab56107 ("device-dax: Convert to vmf_insert_mixed and
vm_fault_t") in 4.19-rc1, 'rc' was not converted to vm_fault_t. Now
converted.
Link: http://lkml.kernel.org/r/20180830153813.GA26059@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix three typos in CONFIG_WARN_ALL_UNSEEDED_RANDOM help text.
Link: http://lkml.kernel.org/r/20180830194505.4778-1-thibaut@sautereau.fr
Signed-off-by: Thibaut Sautereau <thibaut@sautereau.fr>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__ro_after_init is a specific __attribute__ that checkpatch does currently
not understand.
Add it to the known $Attribute types so that code that uses variables
declared with __ro_after_init are not thought to be a modifier type.
This appears as a defect in checkpatch output of code like:
static bool trust_cpu __ro_after_init = IS_ENABLED(CONFIG_RANDOM_TRUST_CPU);
[...]
if (trust_cpu && arch_init) {
where checkpatch reports:
ERROR: space prohibited after that '&&' (ctx:WxW)
if (trust_cpu && arch_init) {
Link: http://lkml.kernel.org/r/0fa8a2cb83ade4c525e18261ecf6cfede3015983.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It looks like I missed the PUD path when doing VM_MIXEDMAP removal.
This can be triggered by:
1. Boot with memmap=4G!8G
2. build ndctl with destructive flag on
3. make TESTS=device-dax check
[ +0.000675] kernel BUG at mm/huge_memory.c:824!
Applying the same change that was applied to vmf_insert_pfn_pmd() in the
original patch.
Link: http://lkml.kernel.org/r/153565957352.35524.1005746906902065126.stgit@djiang5-desk3.ch.intel.com
Fixes: e1fb4a0864 ("dax: remove VM_MIXEDMAP for fsdax and device dax")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Rostedt (VMware)