Commit Graph

1259 Commits

Author SHA1 Message Date
Archit Taneja a0d8dde9cb OMAPDSS: panels: keep platform data of all panels in a single header
Structs for platform data of omapdss panels are found in headers in the
'include/video/' path. Board files populate these structs with platform
specific values, and the panel driver uses these to configure the panel.

Currently, each panel has it's own header in the above path. Move all the
omapdss panel platform data structs to a single header omap-panel-data.h.
This is useful because:

- All other omapdss panel drivers will be modified to use platform data. This
  would lead to a lot of panel headers usable only by omapdss. A lot of these
  platform data structs are trivial, and don't really need a separate header.
- Platform data would be eventually removed, and platform information would be
  passed via device tree. Therefore, omapdss panel platform data structs are
  temporary, and will be easier to remove if they are all in the same header.
- All board files will have to include the same header to configure a panel's
  platform data, that makes the board files more consistent.

Signed-off-by: Archit Taneja <archit@ti.com>
2013-04-03 15:17:45 +03:00
Archit Taneja ff588d83bf omapdss: features: fix supported outputs for OMAP4
The support outputs struct for overlay managers is incorrect for OMAP4. Make
these changes:

- DPI isn't supported via the LCD1 overlay manager, remove DPI as a supported
  output.
- the TV manager can suppport DPI, but the omapdss driver doesn't support that
  yet, we require some muxing at the DSS level, and we also need to configure
  the hdmi pll in the DPI driver so that the TV manager has a pixel clock. We
  don't support that yet.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-22 10:14:32 +02:00
Grazvydas Ignotas a2f9b2a560 OMAPDSS: tpo-td043 panel: fix data passing between SPI/DSS parts
This driver uses omap_dss_device that it gets from a board file through
SPI platfrom_data pointer to pass data from SPI to DSS portion of the
driver by using dev_set_drvdata(). However this trick no longer works,
as DSS core no longer uses omap_dss_device from a board file to create
the real device, so use a global pointer to accomplish this instead,
like other SPI panel drivers do.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-22 10:14:32 +02:00
Linus Torvalds 6c5096e553 arm-soc: board specific changes
These updates are all for board specific code, including
 
 * defconfig updates for shmobile, davinci, bcm2835, imx, omap and tegra
 * SD/MMC and I2C support on bcm2835 (Raspberry PI)
 * minor updates for PXA
 * shmobile updates to GPIO usage in board files
 * More things in OMAP board files are moved over to device tree probing
 * Better support for audio devices on some OMAP platforms
 
 Conflicts include the omap board-apollon.c file that is removed without
 a replacement, and conflicting context in the 4430sdp board file.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyPmCrR//JCVInAQKc4xAAm3UXWLjjIecgdcWperYzUn8wVGg2sRvT
 eFFtGvj3iC+HttPw01O2uVn2O/ixW6SJIgls1O3VTt6IKXPQg3OCjeu1/1vvgq14
 IWuOVS9TLUS4IWkbIvQSdWrDTHocon1Umx+yIgyOpenHBn6kHMg1Tx6qQlUKKo8q
 ne8DKlAfSmao2oHg08Biuzc+cjUOCj7Dq57P1Y5gRhtmdXiFfvdd6GytyFAGUl/m
 60c7BECUs9ileeAUTgehsUk84uV9w/FHeWhccxKspd8GjuHg31t5lB/PEEud34FK
 CTBWoPRn/xG6qjmp34kjP2zIFVfiYYscJpSzXw+cOmPx2gNcs9mGUflAmG9I2t/C
 TPuRCgmhqjZkfHjoNPUaGSvLa4m3279lrqxVqU6BWs8NlqzXSma1rqUKCxikV4lR
 OlPasykwIGdHoJWyrm517RRkLq9Jn2XxtZmequp8TAsUBzW1Su3ZNArSQ6VqGTgs
 W8T20UGVj4bDaAUG4VICeRZGIJx5wknEr11NrRL1a0/EFhFUxNFZf5JAs1YHw/Yi
 rJP8oTppbo6eAaTThc6/a1/rklu8TUcRvmeS+iIH4IFxbroqc/ntAYd16+cKhPbO
 EJtvUv2B3WQZesV7zmDG4TzleYjgYeFxPzTeYHHOYRIgDA3al2eSlp6EIZULSmul
 gqxlMv/YHF8=
 =/qBE
 -----END PGP SIGNATURE-----

Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board specific changes from Arnd Bergmann:
 "These updates are all for board specific code, including

   - defconfig updates for shmobile, davinci, bcm2835, imx, omap and
     tegra

   - SD/MMC and I2C support on bcm2835 (Raspberry PI)

   - minor updates for PXA

   - shmobile updates to GPIO usage in board files

   - More things in OMAP board files are moved over to device tree
     probing

   - Better support for audio devices on some OMAP platforms"

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
  ARM: imx_v4_v5_defconfig: Add VPU support
  ARM: imx: configs: enable netfilter support
  ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init
  ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc
  RX-51: Register twl4030-madc device
  RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel
  ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers
  ARM: OMAP1: nokia770: enable CBUS/Retu
  ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator
  ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support
  ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies
  ARM: OMAP2+: craneboard: support the TPS65910 PMU
  ARM: OMAP2+: craneboard: support NAND device
  ARM: OMAP3: cm-t3517: add MMC support
  ARM: OMAP2+: Remove apollon board support
  ARM: shmobile: armadillo800eva: set clock rates before timer init
  ARM: tegra: defconfig updates
  ARM: shmobile: mackerel: Use gpio_request_one()
  ARM: shmobile: kzm9g: Use gpio_request_one()
  ARM: shmobile: bonito: Use gpio_request_one()
  ...
2013-02-21 15:33:45 -08:00
Linus Torvalds 06991c28f3 Driver core patches for 3.9-rc1
Here is the big driver core merge for 3.9-rc1
 
 There are two major series here, both of which touch lots of drivers all
 over the kernel, and will cause you some merge conflicts:
   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.
   - remove CONFIG_EXPERIMENTAL
 
 If you need me to provide a merged tree to handle these resolutions,
 please let me know.
 
 Other than those patches, there's not much here, some minor fixes and
 updates.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
 weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
 =yWAQ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...
2013-02-21 12:05:51 -08:00
NeilBrown eb91e79b9f OMAPDSS: add FEAT_DPI_USES_VDDS_DSI to omap3630_dss_feat_list
commit 195e672a76
   OMAPDSS: DPI: Remove cpu_is_xxxx checks

made the mistake of assuming that cpu_is_omap34xx() is exclusive of
other cpu_is_* predicates whereas it includes cpu_is_omap3630().

So on an omap3630, code that was previously enabled by
  if (cpu_is_omap34xx())
is now disabled as
  dss_has_feature(FEAT_DPI_USES_VDDS_DSI)
fails.

So add FEAT_DPI_USES_VDDS_DSI to omap3630_dss_feat_list.

Cc: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-02-14 13:06:46 +02:00
Kyungmin Park 21cc2bda8b ARM: OMAP2+: Remove apollon board support
As apollon board doesn't used anymore, remove it.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
[tony@atomide.com: dropped uncompress.h changes, it's gone]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-02-01 10:11:19 -08:00
Thierry Reding bc3bad166c video: Convert to devm_ioremap_resource()
Convert all uses of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.

devm_ioremap_resource() provides its own error messages so all explicit
error messages can be removed from the failure code paths.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22 11:41:58 -08:00
Greg Kroah-Hartman 48c68c4f1b Drivers: video: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:01 -08:00
Tony Lindgren 770b6cb4d2 ARM: OMAP: Fix drivers to depend on omap for internal devices
These devices are not available on other architectures, so
let's limit them to omap.

If the driver subsystem maintainers want to build test
system wide changes without building for each target,
it's easy to carry a test patch that just strips out the
depends entries from Kconfig files.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-16 15:23:37 -08:00
Tomi Valkeinen bd0f5cc364 OMAPDSS: fix TV-out issue with DSI PLL
Commit 0e8276ef75 (OMAPDSS: DPI: always
use DSI PLL if available) made dpi.c use DSI PLL for its clock. This
works fine, for DPI, but has a nasty side effect on OMAP3:

On OMAP3 the same clock is used for DISPC fclk and LCD output. Thus,
after the above patch, DSI PLL is used for DISPC and LCD output. If
TV-out is used, the TV-out needs DISPC. And if DPI is turned off, the
DSI PLL is also turned off, disabling DISPC.

For this to work, we'd need proper DSS internal clock handling, with
refcounts, which is a non-trivial project.

This patch fixes the issue for now by disabling the use of DSI PLL for
DPI on OMAP3.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-13 14:24:43 +02:00
Tomi Valkeinen 3ed37d9aba Revert "OMAPFB: simplify locking"
This reverts commit b41deecbda.

The simpler locking causes huge latencies when two processes use the
omapfb, even if they use different framebuffers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-13 13:19:05 +02:00
Tomi Valkeinen c7e1eae537 OMAPFB: remove silly loop in fb2display()
fb2display() has a for loop which always returns at the first iteration.
Replace the loop with a simple if.

This removes the smatch warning:

drivers/video/omap2/omapfb/omapfb.h:153 fb2display() info: loop could be
replaced with if statement.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-13 12:18:24 +02:00
Tomi Valkeinen fa0c5e7129 OMAPFB: fix error handling in omapfb_find_best_mode()
omapfb_find_best_mode() doesn't check for the return value of kmalloc.
Fix this. This also removes the smatch warning:

drivers/video/omap2/omapfb/omapfb-main.c:2256 omapfb_find_best_mode()
error: potential null dereference 'specs'.  (kzalloc returns null)

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-13 12:13:51 +02:00
Tomi Valkeinen 057eeaee68 OMAPFB: use devm_kzalloc to allocate omapfb2_device
Use devm_kzalloc to allocate omapfb2_device. This fixes possible memory
leak:

drivers/video/omap2/omapfb/omapfb-main.c:2553 omapfb_probe() warn:
possible memory leak of 'fbdev'

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-13 12:08:21 +02:00
Tomi Valkeinen 8105c94bc4 OMAPDSS: DISPC: remove dispc fck uses
The previous patch changes dispc to get the dispc fck rate from dss core
driver. This was the only use of the dispc fck in dispc, and thus we can
now remove the clock handling.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-12 13:34:14 +02:00
Tomi Valkeinen 5aaee69d7f OMAPDSS: DISPC: get dss clock rate from dss driver
Dispc currently gets dispc's fck with clk_get() and uses clk_get_rate()
to get the rate for scaling calculations. This causes a problem with
common clock framework, as omapdss uses the dispc functions inside a
spinlock, and common clock framework uses a mutex in clk_get_rate().

Looking at the DSS clock tree, the above use of the dispc fck is not
quite correct. The DSS_FCLK from PRCM goes to DSS core block, which has
a mux to select the clock for DISPC from various options, so the current
use of dispc fck bypasses that. Fortunately we never change the dispc
clock mux for now.

To fix the issue with clk_get_rate(), this patch caches the dss clock
rate in dss.c when it is set. Dispc will then ask for the clock rate
from dss. While this is not very elegant, it does fix the issue, and
it's not totally wrong when considering that the dispc fck actually
comes via dss.

In the future we should probably look into common clock framework and
see if that could be used to represent the DSS clock tree properly.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-12 13:34:13 +02:00
Tomi Valkeinen a9ee9f08b6 OMAPDSS: use omapdss_compat_init() in other drivers
omapdss_compat_init() and omapdss_compat_uninit() is called internally
by omapdss. This patch moves the calls to omapfb, omap_vout and omapdrm
drivers. omapdrm driver can later remove the call after non-compat
support has been implemented in omapdrm.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:06:00 +02:00
Tomi Valkeinen 348be69d30 OMAPDSS: export dispc functions
Export DISPC functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:06:00 +02:00
Tomi Valkeinen eda3427363 OMAPDSS: export dss_feat functions
Export dss_features related functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:59 +02:00
Tomi Valkeinen a97a963475 OMAPDSS: export dss_mgr_ops functions
Export dss_mgr_ops related functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:59 +02:00
Tomi Valkeinen d13f5b7d98 OMAPDSS: separate compat files in the Makefile
Separate the core DSS files and compat layer files in the Makefile for
clarity.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:58 +02:00
Tomi Valkeinen 09e82ba701 OMAPDSS: move display sysfs init to compat layer
Move creation of the sysfs files for displays to the compat layer.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:58 +02:00
Tomi Valkeinen 8b09551338 OMAPDSS: DPI: use dispc's check_timings
dpi.c uses dss_mgr_check_timings() to verify video timings, but that
function is in the compat layer. Change dpi.c to use the dispc's check
instead.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:57 +02:00
Tomi Valkeinen f9b719b6c2 OMAPDSS: DISPC: add dispc_ovl_check()
This patch adds a new function, dispc_ovl_check(), which can be used to
verify scaling configuration for an overlay. The function gets both the
overlay and overlay manager as parameters, so that the caller does not
need to configure the hardware before using this function.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:57 +02:00
Tomi Valkeinen 96e2e63743 OMAPDSS: move irq handling to dispc-compat
The whole dispc irq handling system we currently have is only needed for
compat layer, and thus can be moved from dispc.c to the compat layer.

This is quite straigtforward, but we need to add new dispc functions to
request and free the actual hardware irq: dispc_request_irq() and
dispc_free_irq().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:57 +02:00
Tomi Valkeinen 549acbe7a3 OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c
We have two functions to wait for a dispc interrupt:

int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout);
int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,

Of these, the former is not used at all, and can be removed. The latter
is only used by the compat layer, and can be moved to the compat layer
code.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:56 +02:00
Tomi Valkeinen bb39813413 OMAPDSS: move blocking mgr enable/disable to compat layer
dispc_mgr_enable_sync and dispc_mgr_disable_sync are only used with the
compat mode. Non-compat will use the simpler enable and disable
functions.

This patch moves the synchronous enable/disable code to the compat
layer. A new file is created, dispc-compat.c, which contains low level
dispc compat code (versus apply.c, which contains slightly higher level
compat code).

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:56 +02:00
Tomi Valkeinen 1550202d4a OMAPDSS: manage framedone irq with mgr ops
Some of the output drivers need to handle FRAMEDONE interrupt from
DISPC. This creates a direct dependency to dispc code, and we need to
avoid this to make the compat code to work.

Instead of the output drivers registering for dispc interrupts, we
create new mgr-ops that are used to register a framedone handler. The
code implementing the mgr-ops is responsible for calling the handler
when DISPC FRAMEDONE interrupt happens. The compat layer is improved
accordingly to do the call to the framedone handler.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:55 +02:00
Tomi Valkeinen 74b65ec245 OMAPDSS: add manager ops
The output drivers need some operations from the overlay managers, like
enable and set_timings. These will affect the dispc registers, and need
to be synchronized with the composition-side changes with overlays and
overlay managers.

We want to handle these calls in the apply.c in the compatibility mode,
but when in non-compat mode, the calls need to be handled by some other
component (e.g. omapdrm).

To make this possible, this patch creates a set of function pointers in
a dss_mgr_ops struct, that is used to redirect the calls into the
correct destination.

The non-compat users can install their mgr ops with
dss_install_mgr_ops() function.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:55 +02:00
Tomi Valkeinen 6abae7a18a OMAPDSS: move ovl function setup to apply.c
Most of the functions that are assigned to the fields in ovl struct are
in apply.c. By moving the function pointer setup into apply.c we can
make these functions static.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:54 +02:00
Tomi Valkeinen 0c49ff747a OMAPDSS: move ovl-mgr function setup to apply.c
Most of the functions that are assigned to the fields in ovl-mgr struct
are in apply.c. By moving the function pointer setup into apply.c we can
make these functions static.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:54 +02:00
Tomi Valkeinen 23dfd1ac87 OMAPDSS: move ovl & ovl-mgr init to apply.c
Overlay and overlay_manager structs will only be needed in the compat
mode.

This patch moves initialization of overlay and overlay_manager structs
to apply.c, so that they are handled in omapdss_compat_init().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:54 +02:00
Tomi Valkeinen 8dd2491a42 OMAPDSS: add omapdss_compat_init()
Add two new exported functions, omapdss_compat_init and
omapdss_compat_uninit, which are to be used by omapfb, omap_vout to
enable compatibility mode for omapdss. The functions are called by
omapdss internally for now, and moved to other drivers later.

The compatibility mode is implemented fully in the following patches.
For now, enabling compat mode only sets up the private data in apply.c.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 17:05:53 +02:00
Tomi Valkeinen 6b6f1edfdb OMAPFB: connect ovl managers to all dssdevs
Commit 5d89bcc341 (OMAPDSS: remove initial
display code from omapdss) moved setting up the initial overlay, overlay
manager, output and display connections from omapdss to omapfb.

However, currently omapfb only handles the connection related to the
default display, which means that no overlay managers are connected to
other displays.

This patch changes omapfb to go through all dssdevs, and connect an
overlay manager to them.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 16:55:04 +02:00
Tomi Valkeinen 486c0e17b7 OMAPDSS: manage output-dssdev connection in output drivers
We currently attach an output to a dssdev in the initialization code for
dssdevices in display.c. This works, but doesn't quite make sense: an
output entity represents (surprisingly) an output of DSS, which is
managed by an output driver. The output driver also handles adding new
dssdev's for that particular output.

It makes more sense to make the output-dssdev connection in the output
driver. This is also in line with common display framework.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 16:55:04 +02:00
Tomi Valkeinen 09a8c45cbb OMAPFB: remove warning when trying to alloc at certain paddress
omapfb gives a WARN_ONCE if a predefined physical address is given for
allocating the framebuffer memory, as this is not currently supported.

However, the same warning happens if omapfb fails to allocate memory
during runtime, as when the allocation has failed, omapfb tries to
re-allocate the old memory with the physical address of the old memory
area.

Remove the warning from omapfb_alloc_fbmem, as it serves no purpose on
the failure case above, and move it to omapfb_parse_vram_param, so that
we only warn if physical address is given via omapfb module parameters.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 16:55:03 +02:00
Tomi Valkeinen b41deecbda OMAPFB: simplify locking
Kernel lock verification code has lately detected possible circular
locking in omapfb. The exact problem is unclear, but omapfb's current
locking seems to be overly complex.

This patch simplifies the locking in the following ways:

- Remove explicit omapfb mem region locking. I couldn't figure out the
  need for this, as long as we take care to take omapfb lock.

- Get omapfb lock always, even if the operation is possibly only related
  to one fb_info. Better safe than sorry, and normally there's only one
  user for the fb so this shouldn't matter.

- Make sure fb_info lock is taken first, then omapfb lock.

With this patch the warnings about possible circular locking does not
happen anymore.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
2012-12-07 16:55:03 +02:00
Tomi Valkeinen 636f4e1b45 OMAPFB: move dssdev->sync call out from omapfb_realloc_fbmem
Currently omapfb_realloc_fbmem() calls dssdev->sync to ensure any
possible frame update is finished. This patch moves the call to
dssdev->sync from omapfb_realloc_fbmem to the callers of
omapfb_realloc_fbmem.

This keeps dssdev related calls out from omapfb_realloc_fbmem, which
makes sense as the function should only deal with fb memory. Also, this
seems to avoid a lockdep warning about possible circular locking.
However, the exact reason for that warning is still unclear.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 16:51:36 +02:00
Tomi Valkeinen 09645d2583 OMAPFB: remove exported udpate window
omapfb contains an exported omapfb_update_window function, which, at
some point in history, was used by a closed source SGX driver. This was
a hack even then, and should not be needed anymore. So remove it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-07 16:50:48 +02:00
Axel Lin c252ea0f75 OMAPDSS: Add terminating entry for picodlp_i2c_id table
The i2c_device_id table is supposed to be zero-terminated.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-30 10:54:41 +02:00
Archit Taneja bdb736abfa OMAPDSS: Use only "omapdss_dss" platform device to get context lost count
When enabling a hwmod, omap_hwmod refers to the register mentioned in the
hwmod struct's member 'prcm.omap4.context_offs' to see whether context was
lost or not. It increments the context lost count for the hwmod and then clears
the register.

All the DSS hwmods have the same register(RM_DSS_DSS_CONTEXT) as context_offs.
When DSS is enabled, the first hwmod to be enabled is the "dss_core" hwmod since
it's corresponding platform device is the parent platform device("omapdss_dss").
The dss_core hwmod updates it's context lost count correctly and clears the
register. When the hwmods corresponding to the children platform devices are
enabled, they see that the register is clear, and don't increment their context
lost count. Therefore, all the children platform devices never report a loss in
context.

The DISPC driver currently gets the context lost count for DSS power domain from
it's corresponding platform device instance("omapdss_dispc"). The DISPC platform
device is one of the child devices, and it's corresponding hwmod("dss_dispc")
doesn't report the context lost count correctly.

Modify dss_get_ctx_loss_count() such that it always takes the "omapdss_dss"
platform device as it's input, move the function to dss.c so that it has access
to that platform device.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-29 12:48:49 +02:00
Tomi Valkeinen 8f46efadf3 OMAPDSS: add dss_get_core_pdev()
Add dss_get_core_pdev() which returns the platform device for dss core
device. The following patches use the core pdev to register sysfs files
in the compat code.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:47:25 +02:00
Tomi Valkeinen 3f30b8c2b6 OMAPDSS: create display-sysfs.c
Move display sysfs related code from display.c to display-sysfs.c, for
clarity. The sysfs code will only be used for compat mode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:47:25 +02:00
Tomi Valkeinen 74e164588e OMAPDSS: DISPC: pass pclk & lclk to dispc_ovl_calc_scaling
In order to make the scaling calculations independent of the current
hardware configuration (e.g. which manager is connected to this output),
we need to change the calc funcs to get all the variables needed for the
calculations via parameters.

This patch changes dispc_ovl_calc_scaling to get pclk and lclk as
parameters.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:47:25 +02:00
Tomi Valkeinen 0c6921de37 OMAPDSS: DISPC: pass pclk & lclk to calc_scaling
In order to make the scaling calculations independent of the current
hardware configuration (e.g. which manager is connected to this output),
we need to change the calc funcs to get all the variables needed for the
calculations via parameters.

This patch changes calc_scaling to get pclk and lclk as parameters.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:47:24 +02:00
Tomi Valkeinen 465ec13f60 OMAPDSS: DISPC: pass pclk & lclk to check_horiz_timing_omap3
In order to make the scaling calculations independent of the current
hardware configuration (e.g. which manager is connected to this output),
we need to change the calc funcs to get all the variables needed for the
calculations via parameters.

This patch changes check_horiz_timing_omap3() to get pclk and lclk as
parameters.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:02 +02:00
Tomi Valkeinen 8702ee5064 OMAPDSS: DISPC: pass pclk to calc_core_clk()
In order to make the scaling calculations independent of the current
hardware configuration (e.g. which manager is connected to this output),
we need to change the calc funcs to get all the variables needed for the
calculations via parameters.

This patch changes calc_core_clk() function to get pclk as a parameter.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:02 +02:00
Tomi Valkeinen 251886d8bc OMAPDSS: DISPC: pclk & lclk rates for writeback
Change the dispc_plane_pclk_rate and dispc_plane_lclk_rate functions to
return 0 if the given plane is the writeback plane. The clocks are not
valid for WB, but returning 0 from these functions instead of running
into BUG() will simplify the code that uses these functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:02 +02:00
Tomi Valkeinen 3c91ee8cc9 OMAPDSS: DISPC: use WARN_ON() in dispc_mgr_go
dispc_mgr_go() should never be called with manager output disabled or if
the GO bit is already set. Change the current silent returns to
WARN_ONs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:02 +02:00
Tomi Valkeinen 916188a466 OMAPDSS: cleanup WB enable/is_enabled functions
Instead of doing direct register reads/writes, dispc_wb_enable() and
dispc_wb_is_enabled() functions can use the common overlay functions to
set and check the enable bit.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:02 +02:00
Tomi Valkeinen b08e3e1342 OMAPDSS: DISPC: Remove blocking code from dispc_wb_enable()
WB will not be used with compat-mode, i.e. from omapfb. This means we
don't need the current complex dispc_wb_enable function, but can have a
simple register write version of the function.

This patch removes all the extra code from dispc_wb_enable()

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:02 +02:00
Tomi Valkeinen 15f5e7324a OMAPDSS: DISPC: use get_framedone_irq in disable_digit_out
dispc_mgr_disable_digit_out() needs to wait until the DIGIT output is
turned off. This is done with either VSYNC irq on OMAP2/3 and
FRAMEDONETV on OMAP4+. It currently uses a rather hacky way to decide
what irq to use.

This patch changes dispc_mgr_disable_digit_out to use
dispc_mgr_get_framedone_irq to find out if there's framedone irq on this
SoC, and if not, uses VSYNC.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:02 +02:00
Tomi Valkeinen cffa947d27 OMAPDSS: DISPC: add no_framedone_tv feat
OMAP2/3 do not have FRAMEDONETV irq, but later omaps do. We currently
always return 0 from dispc_mgr_get_framedone_irq() for TV output to be
compatible with OMAP2/3.

This patch implements "no_framedone_tv" dispc-feature that is used in
dispc_mgr_get_framedone_irq to return either 0 for OMAP2/3, or the
correct IRQ number for FRAMEDONETV on OMAP4+.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:01 +02:00
Tomi Valkeinen e870f21232 OMAPDSS: don't WARN if there's no DSI device
dsi_get_dsidev_from_id() gives a WARN if DSI support is not compiled in.
This warning is not right, as it's valid to call
dsi_get_dsidev_from_id() to see if there is DSI support or not.

Remove the WARN().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:01 +02:00
Tomi Valkeinen 1de8e129f5 OMAPDSS: DPI: fix crash with dpi_verify_dsi_pll()
If the DSI support has not been compiled in or the SoC doesn't have DSI
hardware, dpi_get_dsidev() returns NULL. This NULL is passed to
dpi_verify_dsi_pll() causing a crash. The bug was added with commit
0e8276ef75 (OMAPDSS: DPI: always use DSI
PLL if available).

Fix this by checking if dsidev is NULL before calling
dpi_verify_dsi_pll().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:01 +02:00
Tomi Valkeinen 7e12be71fb OMAPDSS: remove declarations for non-existing functions
Remove dispc_mgr_is_channel_enabled() and dss_mgr_get_timings()
declarations, as the function doesn't exist.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27 12:27:01 +02:00
Tomi Valkeinen 474ff6b8a7 omapdss fixes for 3.7-rc
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQr1wOAAoJEPo9qoy8lh71lhgP/iJhDRXhyBQ113ebm8BeGSYY
 prYrUzNFbz2qb9q8LeQejgMSNSnFgj9vvdwox/bwvbloDUSrFSEcSvHzL1blaufD
 GXMqdRxHYOs6k1Yiltf7jchSEeX20PCWRBcSlket8jDY1kzy3siOVlpc9O/53Hj9
 hnCGhwO0D53tgeUnCm4B6VtqmspjoX4eJO6AL9WRlCm/vTre4bk43/hfUNusP5uw
 7cplGxpOQMKLOQuMIIuOBsVVXMQFkVO7FK48keGrxhwWaQZMJUKf4up73625eBTn
 81WhexRPmJ8+kXFY+/qRrKy02j61xfOeJJD/Eh7J6u+FeMoqe9LyxtVzxUeOrLr8
 iV/VWyQnppBiVAc865QQLVyPBHi9OGOPkzGBcWvy/4jv8uxvmG3hiIAxHlTwGrjK
 1deLjbj/smDlgvQ5j9T43+NABiIzUQoNVgRm2iWDh12KGKORwlaBb2hU7r0BLV+D
 /q2BJFPIAkafdQ47eWMPkNvhpMOeOJx6MXv0kQ7kAgq9CcHt1sQpzYZFzZa+CeYZ
 Iq+oLj+ByLj3KbKMmSzJtYW+JLGeguSGgiegRW9s/BESxj0cNjPNLHtNMcrklpjk
 sMrCd04dNlFMJUabKr380l9yVnCRX+tNGc8wYTPRRe7iz8G1Ps9Y9cu7py2xQ5/N
 GIt8UIGa0PeY8R04N/YV
 =1jPB
 -----END PGP SIGNATURE-----

Merge tag 'omapdss-for-3.7-rc' of git://gitorious.org/linux-omap-dss2/linux

omapdss fixes for 3.7-rc

Conflicts:
	drivers/video/omap2/dss/dss.c
2012-11-26 10:26:29 +02:00
Tomi Valkeinen 9b76c9cdec OMAPFB: fix compilation error
omapfb compilation fails on x86 (but not on omap):

drivers/video/omap2/omapfb/omapfb-ioctl.c: In function ‘omapfb_ioctl’:
drivers/video/omap2/omapfb/omapfb-ioctl.c:861:23: error: ‘SZ_1M’ undeclared (first use in this function)
drivers/video/omap2/omapfb/omapfb-ioctl.c:861:23: note: each undeclared identifier is reported only once for each function it appears in

Fix this by including linux/sizes.h.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-23 10:50:32 +02:00
Aaro Koskinen 8ad9375f8b OMAPDSS: do not fail if dpll4_m4_ck is missing
Do not fail if dpll4_m4_ck is missing. The clock is not there on omap24xx,
so this should not be a hard error.

The patch retains the functionality before the commit 185bae10 (OMAPDSS:
DSS: Cleanup cpu_is_xxxx checks).

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-22 17:23:12 +02:00
Aaro Koskinen ee6352de51 OMAPDSS: panel-n8x0: register the DSS driver after SPI probe
Register the DSS driver after SPI probe. This simplifies the
initialization. This is similar to what is being done e.g.
in panel-acx565akm.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-22 17:22:55 +02:00
Archit Taneja 264236f82e OMAPDSS: Add a dispc_features struct for OMAP5
Add a dispc_features struct for OMAP5. Previously, OMAP5 used the same
struct as OMAP4. The new struct for OMAP5 contains the updated register
field offset and maximum limit for overlay manager width and height.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-20 16:54:39 +02:00
Archit Taneja 33b89928f5 OMAPDSS: Add overlay manager width and height limits as a dispc feature
The overlay manager width and height vary in OMAP5 from previous OMAPs
in terms of maximum limit and register field positions. Add parameters
in dispc_features for these. Also remove params related to manager width
and height from dss_features, as we want to maintain a feature list for
individual IPs.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-20 16:52:16 +02:00
Matthias Brugger 4ee9a5377b OMAPFB: Delete if statement evaluating a constant.
Variable r is never set to any value different to zero.
Delete the if statement as it will never executed.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-19 13:12:41 +02:00
Tushar Behera c415187b68 OMAPFB: Fix possible null pointer dereferencing
Commit 952cbaaa9b (OMAPFB: Change
dssdev->manager references) added checks for OMAPFB_WAITFORVSYNC ioctl
to verify that the display, output and overlay manager exist. However,
the code erroneously uses && for each part, which means that
OMAPFB_WAITFORVSYNC may crash the kernel if no display, output or
manager is associated with the framebuffer.

This patch fixes the issue by using ||.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-19 10:41:50 +02:00
Tomi Valkeinen dcca5cf07b Merge branch '3.8/vram-conversion' of git://gitorious.org/linux-omap-dss2/linux
Conflicts:
	drivers/video/omap2/dss/Kconfig
	drivers/video/omap2/omapfb/omapfb-ioctl.c
	drivers/video/omap2/omapfb/omapfb-main.c

Merge changes to make omapfb use common dma_alloc, and remove omap's
custom vram allocator.
2012-11-16 11:42:46 +02:00
Tomi Valkeinen a915d4ca24 Revert "OMAPDSS: HDMI: Create platform device for audio support"
This reverts commit 14840b9a83.

The commit breaks audio, and a new version will be applied later.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-16 09:32:26 +02:00
Tomi Valkeinen 966458f89d OMAP: remove vram allocator
OMAP specific vram allocator is no longer in use, and we can remove all
the vram code.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-13 09:52:41 +02:00
Tomi Valkeinen 0049fb2603 OMAPFB: use dma_alloc_attrs to allocate memory
Use dma_alloc_attrs to allocate memory instead of omap specific vram
allocator. After this we can remove the omap vram allocator.

There are some downsides to this change:

1) dma_alloc_attrs doesn't let us allocate at certain physical address.
However, this should not be a problem as this feature of vram allocator
is only used when reserving the framebuffer that was initialized by the
bootloader, and we don't currently support "passing" a framebuffer from
the bootloader to the kernel anyway.

2) dma_alloc_attrs, as of now, always ioremaps the allocated area, and
we don't need the ioremap when using VRFB. This patch uses
DMA_ATTR_NO_KERNEL_MAPPING for the allocation, but the flag is currently
not operational.

3) OMAPFB_GET_VRAM_INFO ioctl cannot return real values anymore. I
changed the ioctl to return 64M for all the values, which, I hope, the
applications will interpret as "there's enough vram".

4) "vram" kernel parameter to define how much ram to reserve for video
use no longer works. The user needs to enable CMA and use "cma"
parameter.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-13 09:52:24 +02:00
Archit Taneja c909290209 OMAPDSS: APPLY: Remove unnecessary call to mg_clear_shadow_dirty
When doing a manual update in dss_mgr_start_update, we clear the shadow dirty
flags. Although there isn't any harm in clearing them. The need to clear them
out here should never arrive.

When applying configurations for a manual update manager, we never do any
register writes, i.e, calls to dss_mgr_write_regs and dss_mgr_write_regs_extra
never happen while applying. We do all these writes only when we call
dss_mgr_start_update. Hence, there is never a time when the shadow registers
are dirty.

Remove the call to mg_clear_shadow_dirty.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-12 13:52:59 +02:00
Archit Taneja ca8d4e8bb2 OMAPDSS: APPLY: Remove unnecessary variable in dss_apply_irq_handler
The bool was_updating is never really used for anything. It is set to the
current value of mp->updating, but not used anywhere. Remove this variable.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-12 13:52:59 +02:00
Archit Taneja 02b5ff1a96 OMAPDSS: APPLY: Don't treat an overlay's channel out as shadow bits
An overlay's channel out field isn't a shadow register. The TRM says that it's
taken into effect immediately. This understanding was missing and channel out
was treated as a shadow parameter, and in overlay's private data as extra info.

Program channel out bits directly in dss_ovl_set_manager(). In order to do this
safely, we need to be totally sure that the overlay is disabled in hardware. For
auto update managers, we can assume that the overlay was truly disabled at
dss_ovl_unset_manager() through the wait_pending_extra_info_updates() call.
However, when unsetting manager for an overlay that was previously connected to
a manager in manual update, we can't be sure if the overlay is truly disabled.
That is, op->enabled might not reflect the actual state of the overlay in
hardware. The older manager may require a manual update transfer to truly
disable the overlay. We expect the user of OMAPDSS to take care of this, in
OMAPDSS, we make sure that an overlay's manager isn't unset if there if
extra_info is still dirty for that overlay.

The wrong understanding of channel out bits also explains the reason why we see
sync lost when changing an overlay's manager which was previously connected to a
manual update manager. The following sequence of events caused this:

- When we disable the overlay, no register writes are actually done since the
  manager is manual update, op->enabled is set to false, and the
  extra_info_dirty flag is set. However, in hardware, the overlay is still
  enabled in both shadow and working registers.

- When we unset the manager, the software just configures the overlay's manager
  to point to NULL.

- When we set the overlay to a new manager(which is in auto update) through
  dss_ovl_set_manager, the check  for op->enabled passes, the channel field in
  extra info is set to the new manager. When we do an apply on this manager,
  the new channel out field is set in the hardware immediately, and since the
  overlay enable bit is still set in hardware, the new manager sees that the
  overlay is enabled, and tries to retrieve pixels from it, this leads to sync
  lost as it might be in the middle of processing a frame when we set the
  channel out bit.

The solution to this was to ensure that user space does another update after
disabling the overlay, this actually worked because the overlay was now truly
disabled, and an immediate write to channel out didn't impact since the manager
saw the new overlay as disabled, and doesn't try to retrieve pixels from it.

Remove channel as an extra_info field. Make dss_ovl_unset_manager more strict
about the overlay being disabled when detaching the manager. For overlays
connected to a manual update manager, unset_manager fails if we need another
update to disable the overlay.

We still need to a manual update to ensure the overlay is disabled to get change
the overlay's manager. We could work on doing a dummy update by using DISPC's
capability to gate the different video port signals. This is left for later.

Remove the comment about the sync lost issue.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-12 13:52:59 +02:00
Archit Taneja 6be0d73e2a OMAPDSS: DISPC: Use output width and height to calculate row/pix inc for writeback
When calculating row and pixel increments for graphics and video pipes, we need
to consider the dimensions of the input frame to know how to read from the
buffer. Hence, we need to calculate these parameters from the input to the
pipeline.

For writeback, the row and pixel increments need to be calculated based on the
output of the writeback pipeline, i.e, the dimensions of the frame after
scaling. Ensure that dispc driver uses values of out_width and out_height when
calling calc_dma/calc_tiler_rotation_offset.

For graphics and video pipes, the original code passed the original height as
frame_height to calc_dma_rotation_offset, and not the predecimated height. This
is left as it is for now. We need to figure out why pre decimated height isn't
needed.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-12 13:52:55 +02:00
Archit Taneja 1c031441a9 OMAPDSS: DISPC: Don't allow predecimation for writeback
Since writeback writes to a buffer instead of reading from one, predecimation
doesn't make sense for it. Configure the width and height predecimation limits
to 1 if the plane is writeback.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-12 13:52:55 +02:00
Archit Taneja 5d501085d4 OMAPDSS: DISPC: Fix calc_scaling_44xx() bugs for writeback pipeline
dispc_ovl_calc_scaling_44xx() doesn't work correctly for writeback. There are
two issues with it:

- the function tries to calculate pixel clock for the input plane using
  dispc_plane_pclk_rate(), calling this with writeback as input plane results in
  a BUG(), this function shouldn't be called for writeback at all. Fix this by
  calculating pixel clock only when we are not in mem to mem mode.

- the maximum input_width is the product of the downscale ratio supported and
  the and the given output_width. This was calculated incorrectly by dividing
  output_width with maxdownscale. Fix this.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-12 13:52:55 +02:00
Tomi Valkeinen 76eed4bcb6 OMAPDSS: HACK: look for regulators with omap4 names
Normally the omapdss driver gets the regulators using the regulator
names assigned for omapdss. However, in an effort to get a minimal DSS
support for DT enabled kernel on selected boards, we will add omapdss
devices and platform data the old way even for DT kernel. This causes
the problem that omapdss cannot find the regulators using omapdss's
regulator names.

This patch creates a temporary workaround for DSI and HDMI by trying to
get the regulators also using native OMAP4 regulator names.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-07 10:34:09 +02:00
Ricardo Neri 3758476501 OMAPDSS: HDMI: Remove __exit macro from hdmi_uninit_display
This function is now used in the driver init path to handle
probe errors properly. Thus, it may be possible to use this function
outside the exit path.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-07 09:19:54 +02:00
Tomi Valkeinen 5b30b7fb4d OMAPDSS: DISPC: fix sparse warning
Fix sparse warning:

drivers/video/omap2/dss/dispc.c:3320:6: warning: symbol
'dispc_dump_irqs' was not declared. Should it be static?

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
2012-11-07 08:57:25 +02:00
Ricardo Neri 14840b9a83 OMAPDSS: HDMI: Create platform device for audio support
Creating the accessory devices, such as audio, from the HDMI driver
allows to regard HDMI as a single entity with audio an display
functionality. This intends to follow the design of drivers such
as MFD, in which a single entity handles the creation of the accessory
devices. Such devices are then used by domain-specific drivers; audio in
this case.

Also, this is in line with the DT implementation of HDMI, in which we will
have a single node to describe this feature of the OMAP SoC.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-06 13:33:36 +02:00
Ricardo Neri d7b6f4437f OMAPDSS: HDMI: Add op to get audio DMA port address offset
It could be possible that the DMA port differs accross diferent HDMI IPs. Thus,
add an IP-specific function to obtain the address offset and size of the DMA
data port.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-06 13:33:36 +02:00
Ricardo Neri d18bc45543 OMAPDSS: HDMI: Uninit display on device add error
The display must be uninitialized in order to free the requested GPIOs.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-06 13:33:36 +02:00
Ricardo Neri 66a06b0c59 OMAPDSS: HDMI: Handle panel init error at probe
Do not blindly assume that the panel could be initialized.

While there, group mutex initialization at a single place.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-06 13:33:35 +02:00
Ricardo Neri 7888839e25 OMAPDSS: HDMI: Make panel return dssdev register errors
Do not assume blindly that the DSS driver was registered successfully.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-06 13:33:35 +02:00
Ricardo Neri 47e443bce7 OMAPDSS: HDMI: Convert to devm_request_and_ioremap
Using devm_request_and_ioremap provides better memory handling and
improves readability.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-06 13:33:35 +02:00
Ricardo Neri af23cb3533 OMAPDSS: HDMI: Rename resource variable at probe.
Minor cleanup to give to the resource variable a more proper name.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-06 13:33:35 +02:00
Chuansheng Liu 933ed63405 OMAPDSS: APPLY: Fix the usage of wait_for_completion_timeout
The return value of wait_for_completion_timeout() is always
>= 0 with unsigned int type.

So the condition "ret < 0" or "ret >= 0" is pointless.

Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-06 13:29:45 +02:00
Chuansheng Liu 864fa7f461 OMAPDSS: DISPC: Fix the usage of wait_for_completion_timeout
The return value of wait_for_completion_timeout() is always
>= 0 with unsigned int type.

So the condition "ret < 0" or "ret >= 0" is pointless.

Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-06 13:29:45 +02:00
Tomi Valkeinen 230edc033d OMAPDSS: DISPC: fix DS variable name
check_horiz_timing_omap3() has a variable named 'DS'. i386 uses DS name
for something else, causing a compilation error. As 'DS' is not a very
good local variable name in the first place, let's change it to 'ds',
fixing the issue.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 14:46:15 +02:00
Tomi Valkeinen 0e8276ef75 OMAPDSS: DPI: always use DSI PLL if available
We currently get the decision whether to use PRCM or DSI PLL clock for
DPI from the board file. This is not a good way to handle it, and it
won't work with device tree.

This patch changes DPI to always use DSI PLL if it's available.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:17:39 +02:00
Tomi Valkeinen 6061675b3f OMAPDSS: DPI: verify if DSI PLL is operational
The SoCs that have DSI module should have a working DSI PLL. However,
some rare boards have not connected the powers to the DSI PLL.

This patch adds a function that tries to power up the DSI PLL, and
reports if that doesn't succeed. DPI uses this function to fall back to
PRCM clocks if DSI PLL doesn't work.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:17:39 +02:00
Tomi Valkeinen 8a3db406f5 OMAPDSS: DPI: use dpi.dsidev to see whether to use dsi pll
Instead of using dpi_use_dsi_pll() to check if dsi pll is to be used, we
can just check if dpi.dsidev != NULL.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:17:39 +02:00
Tomi Valkeinen a5b8399fb6 OMAPDSS: hide dss_select_dispc_clk_source()
dss.c currently exposes functions to configure the dispc source clock
and lcd source clock. There are configured separately from the output
drivers.

However, there is no safe way for the output drivers to handle dispc
clock, as it's shared between the outputs. Thus, if, say, the DSI driver
sets up DSI PLL and configures both the dispc and lcd clock sources to
that DSI PLL, the resulting dispc clock could be too low for, say, HDMI.

Thus the output drivers should really only be concerned about the lcd
clock, which is what the output drivers actually use. There's lot to do
to clean up the dss clock handling, but this patch takes one step
forward and removes the use of dss_select_dispc_clk_source() from the
output drivers.

After this patch, the output drivers only configure the lcd source
clock. On omap4+ the dispc src clock is never changed from the default
PRCM source. On omap3, where the dispc and lcd clocks are actually the
same, setting the lcd clock source sets the dispc clock source.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:17:39 +02:00
Tomi Valkeinen 13a1a2b2a6 OMAPDSS: setup default dss fck
We don't currently set the dss fck when starting up. This is not a
problem, as we setup the fck later when configuring the pixel clocks. Or
this is how it was for omap2, for the rest of the omaps this may not be
so.

For DSI, HDMI and also for DPI when using DSI PLL, we don't need to
change the dss fck, and thus it may be left unconfigured. Usually the
dss fck is already setup fine by default, but we can't trust this.

This patch sets the dss fck to maximum at probe time.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:14:05 +02:00
Tomi Valkeinen 930b027eb4 OMAPDSS: add dss_calc_clock_rates() back
dss_calc_clock_rates() was removed earlier as it was not used, but it is
needed for DSI PLL calculations, so this patch adds it back.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:14:05 +02:00
Tomi Valkeinen 7a98786caa OMAPDSS: DSI: workaround for HSDiv problem
It looks like on many OMAP versions powers for both HSClk and HSDiv to
be enabled to have a functional HSDiv.

This patch fixes the issue by forcing both powers on.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:14:05 +02:00
Tomi Valkeinen b7f1fe541b OMAPDSS: DSI: skip odd dividers when pck >= 100MHz
The DSI PLL and HSDivider can be used to generate the pixel clock for
LCD overlay manager, which then goes to DPI output. On the DPI output
pin the voltage of the signal is shifted from the OMAP's internal
minimal voltage to 1.8V range. The shifting is not instant, and the
higher the clock frequency, the less time there is to shift the signal
to nominal voltage.

If the HSDivider's divider is greater than one and odd, the resulting
pixel clock does not have 50% duty cycle. For example, with a divider of
3, the duty cycle is 33%.

When combining high frequency (in the area of 140MHz+) and non-50% duty
cycle, it has been observed the the shifter does not have enough time to
shift the voltage enough, and this leads to bad signal which is rejected
by monitors.

As a workaround this patch makes the divider calculation skip all odd
dividers when the required pixel clock is over 100MHz. The limit of
100MHz is a guesstimate.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:14:05 +02:00
Tomi Valkeinen 046bc5751d OMAPDSS: fix DPI & DSI init order
DPI may use DSI PLL, so it depends on DSI. However, currently DPI driver
is added first, which causes DPI initialization to fail when it tries to
get the DSI PLL.

This patch changes the init order to fix this.

A better solution would be to separate DSI PLL and DSI drivers. They
have dependencies, though, but we could still have DSI PLL as an
independent entity that we could initialize before any of the output
drivers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-05 11:14:04 +02:00
Tomi Valkeinen 9296dbd79e Merge branch '3.8/misc-2'
Merge omapdss miscellaneous patches.
2012-11-05 11:11:50 +02:00
Tomi Valkeinen b276dd0916 OMAPDSS: DISPC: remove dssdev depependency from error handler
The dispc error handler tries to "fix" issues by disabling and enabling
panel. This is problematic, as we're trying to remove the dependency
from omapdss to the omap_dss_devices. It's also racy, and doesn't really
fix anything.

This patch removes the use of omap_dss_device from the error handler,
and just disables and enables the associated overlay manager. This
should produce similar results as the previous solution, without using
dssdev.

However, the error handling is still horrible. But the problem boils
down to one question, to which I don't have a clear answer: what to do
when a HW error happens?

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-29 12:44:44 +02:00
Tomi Valkeinen 4c6c65b013 OMAPDSS: DISPC: fix loop in error handler
The dispc's error handler has a loop inside another loop, and both use
the same loop variable. This is clearly wrong, and this patch makes a
new variable for the inner loop.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-29 12:44:43 +02:00
Tomi Valkeinen 901e5fe5a4 OMAPDSS: fix DSI2 PLL clk names
dss_generic_clk_source_names is missing the names for clocks from DSI2
PLL. Add them.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-29 12:44:43 +02:00
Tomi Valkeinen 5e18e3527c OMAPFB: improve mode selection from EDID
The current omapfb code goes over all the modes found from the monitors
EDID data, and searches for a mode that is compatible with the DSS
hardware and has the highest x-res.

While this works ok as such, it proves problematic when using DSI PLL
for pixel clock. Calculating DSI PLL dividers is not the fastest of the
operations, and while doing it for one mode is usually ok, doing it for
20 modes is noticable.

Also, the first mode given in the EDID data should be the native mode of
the monitor, and thus also the best mode, so if that can be used, no
need to look further.

This patch changes the code to use the first mode that is compatible
with the DSS hardware.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-29 12:44:42 +02:00
Tomi Valkeinen 2b5c0d4fd2 OMAPFB: remove use of extended edid block
It seems that using the second EDID block causes more problems than is
of any help. The first mode in the extended block will get
FB_MODE_IS_FIRST set, which will override the first mode from the first
EDID block, thus making the default videomode selection not to work
properly.

This patch removes the use of the extended edid block for now.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-29 12:44:42 +02:00
Tomi Valkeinen f236b892b1 OMAPDSS: HDMI: make hdmi pclk check more permissive
The hdmi driver tries to find the given video timings from its static
list of timings, to find the required ID for the mode. The check tries
to find exact match for the pixel clock, among other checks.

with omapfb driver there can be some amount of error in the give pixel
clock, as the pixel clock is converted between Hz and ps, thus the
hdmi's check fails to find the mode.

This patch makes the check more allowing, by rounding the pixel clocks
to nearest MHz.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Ricardo Neri <ricardo.neri@ti.com>
2012-10-29 12:44:42 +02:00
Tomi Valkeinen 7a7ce2c771 OMAPDSS: HDMI: add 1920x1200 video mode
Add 1920x1200 video mode to hdmi driver's static modelist.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Ricardo Neri <ricardo.neri@ti.com>
2012-10-29 12:44:41 +02:00
Tomi Valkeinen 4489823ca7 OMAPDSS: HDMI: use core power on/off with edid & detect
This patch makes use of the hdmi_power_[on|off]_core() functions added
in the previous patch. The functions are used when reading EDID or
detecting if a monitor is connected.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Ricardo Neri <ricardo.neri@ti.com>
2012-10-29 12:44:41 +02:00
Tomi Valkeinen bb426fc963 OMAPDSS: HDMI: split power_on/off to two parts
There's currently just one power-on function for HDMI, which enables the
IP and the video output. When reading EDID or detecting if a monitor is
connected, we don't need the video output.

Enabling the video output for these operations is not a big problem in
itself, but the quick enable/disable cycles caused by the operations
seem to cause sync lost errors from time to time. Also, this makes it
possible to read the EDID before the full video path has been set up.

This patch splits the hdmi_power_on into two parts, hdmi_power_on_core
and hdmi_power_on_full. The "full" version does what hdmi_power_on does
currently, and hdmi_power_on_core only enables the core IP. Similar
changes are made for power_off.

Note that these don't allow the HDMI IP to be first enabled, and later
enable the video output, but the HDMI IP will first need to be powered
off before calling the full version. So this is rather limited
implementation, but it fills the needs for reading EDID.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Ricardo Neri <ricardo.neri@ti.com>
2012-10-29 12:44:40 +02:00
Tomi Valkeinen 4e0397cfa7 OMAPDSS: DISPC: Add IRQ enable/status helpers
DISPC irqs need to be handled from the compat layer and also in the
future by the omapdrm. To make this possible, this patchs adds a set of
helper functions, so that the irqs can be managed without direct
register reads/writes.

The following functions are added, and all the current direct reg
reads/writes are changed to use these.

u32 dispc_read_irqstatus(void);
void dispc_clear_irqstatus(u32 mask);
u32 dispc_read_irqenable(void);
void dispc_write_irqenable(u32 mask);

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-29 12:44:40 +02:00
Tomi Valkeinen 04bd8ac14e OMAPDSS: add dispc_ovl_enabled()
Add new dispc function, dispc_ovl_enabled(). This returns if the overlay
enable bit is set in the registers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-29 12:44:39 +02:00
Tomi Valkeinen f1a813d35f OMAPDSS: DISPC: make _enable_mgr_out public as "dispc_mgr_enable"
We need a low level manager-enable function for omapdrm. We have that
function as dispc internal func, _enable_mgr_out().

This patch exposes that function, and renames it to dispc_mgr_enable().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-29 12:44:39 +02:00
Tomi Valkeinen 3a979f8ad2 OMAPDSS: DISPC: rename dispc_mgr_enable/disable to _sync
The current dispc_mgr_enable/disable function are blocking, and do a bit
too much for omapdrm. We'll expose new enable & disable functions that
will just set the bits in the registers in the following patches.

This patch renames the current functions to *_sync, to make it clear
that they are blocking, and also to free up the dispc_mgr_enable/disable
names for these new functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-29 12:44:38 +02:00
Tomi Valkeinen 392faa0e1a OMAPDSS: DISPC: use dss_feat_get_num_ovls()
Use dss_feat_get_num_ovls() in dispc.c instead of
omap_dss_get_num_overlays() to remove the dependency to overlay.c. Note
that we still have uses of omap_dss_get_num_overlays() in dispc.c, but
these will be moved out in the future patches.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-29 12:44:38 +02:00
Tomi Valkeinen 5d89bcc341 OMAPDSS: remove initial display code from omapdss
Currently omapdss driver sets up the initial connections between
overlays, overlay manager and a panel, based on default display
parameter coming from the board file or via module parameters.

This is unnecessary, as it's the higher level component that should
decide what display to use and how. This patch removes the code from
omapdss, and implements similar code to omapfb.

The def_disp module parameter and the default display platform_data
parameter are kept in omapdss, but omapdss doesn't do anything with
them. It will just return the default display name with
dss_get_default_display_name() call, which omapfb uses. This is done to
keep the backward compatibility.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-29 12:44:25 +02:00
Tomi Valkeinen 2bbcce5e0b OMAPDSS: export dss_get_def_display_name()
Export dss_get_def_display_name() with the name of
omapdss_get_def_display_name() so that omapfb can use it after the next
patch which moves default display handling to omapfb.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-29 12:40:46 +02:00
Wei Yongjun dffc70ade1 OMAPDSS: HDMI: fix missing unlock on error in hdmi_dump_regs()
Add the missing unlock on the error handling path in function
hdmi_dump_regs().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-26 08:45:43 +03:00
Laurent Pinchart f65e384bec omapdss: dss: Fix clocks on OMAP363x
Commit 185bae1095 ("OMAPDSS: DSS: Cleanup
cpu_is_xxxx checks") broke the DSS clocks configuration by erroneously
using the clock parameters applicable to all other OMAP34xx SoCs for the
OMAP363x. This went unnoticed probably because the cpu_is_omap34xx()
class check wasn't seen as matching the OMAP363x subclass.

Fix it by checking for the OMAP363x subclass before checking for the
OMAP34xx class.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-26 08:41:36 +03:00
Tomi Valkeinen ea29c4ea2b OMAPDSS: DSI: fix dsi_get_dsidev_from_id()
If dsi_get_dsidev_from_id() is called with a DSI module id that does not
exist on the board, the function will crash as omap_dss_get_output()
will return NULL.

This happens on omap3 boards when dumping DSI clocks, as the dumping
code will try to get the dsidev for DSI modules 0 and 1, but omap3 only
has DSI module 0.

Also clean up the id -> output mapping, so that if the function is
called with invalid module ID it will return NULL.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Archit Taneja <archit@ti.com>
2012-10-25 17:05:46 +03:00
Tomi Valkeinen c31cba8af8 OMAPDSS: DISPC: fix dispc_mgr_lclk_rate for DIGIT output
dispc_mgr_lclk_rate() cannot currently be called with DIGIT channel
parameter, even if dispc_ovl_lclk_rate() can. Fix this by making
dispc_mgr_lclk_rate() handle DIGIT channel also.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-24 08:49:45 +03:00
Tomi Valkeinen dba01625a3 OMAPDSS: remove dispc_irq_handler declaration
dss.h contains dispc_irq_handler declaration, even if the function is
dispc.c internal. Remove the declaration.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-24 08:49:40 +03:00
Tomi Valkeinen b2c7d54f72 OMAPDSS: get the dss version from core pdev
The output drivers get the omapdss hw version from the platform data for
their respective output device. This doesn't work with DT, as there's no
platform data for them.

Add a new function, omapdss_get_version(), which returns the dss version
from the core device, which will have platform data on DT also. The
function is exported so that users of omapdss can also use it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-24 08:48:16 +03:00
Tomi Valkeinen 998c336d4c OMAPDSS: remove omap_dss_device's suspend/resume
The panel drivers contain enable, disable, suspend and resume calls.
The suspend and resume are effectively identical to disable and enable.

This patch removes panel suspend and enable code from omapdss and the
panel drivers, and replaces their use with enable and disable.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-24 08:46:23 +03:00
Wei Yongjun f8fb7d7b7b OMAPDSS: HDMI: fix missing unlock on error in hdmi_dump_regs()
Add the missing unlock on the error handling path in function
hdmi_dump_regs().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-22 09:51:42 +03:00
Tomi Valkeinen b111224900 OMAPDSS: DISPC: cleanup lcd/digit enable/disable
We currently have a single function to enable and disable the manager
output for LCD and DIGIT. The functions are a bit complex, as handling
both enable and disable require some extra steps to ensure that the
output is enabled or disabled properly without errors before exiting the
function.

The code can be made simpler to understand by splitting the functions
into separate enable and disable functions. We'll also clean up the
comments and some parameter names at the same time.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-18 13:11:13 +03:00
Tomi Valkeinen cb699200af OMAPDSS: DISPC: add dispc_mgr_get_sync_lost_irq()
Add function that returns the sync lost irq mask for the given channel.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-18 13:11:13 +03:00
Tomi Valkeinen 653985112c OMAPDSS: DISPC: cleanup lcd and digit enable
dispc.c's functions to enable LCD and DIGIT outputs can be cleaned up a
bit by using common functions to set the enable bit and to check if the
output is enabled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-18 13:11:12 +03:00
Tomi Valkeinen 16bf20c79e OMAPDSS: DISPC: remove struct omap_overlay use
dispc_ovl_setup() uses struct omap_overlay to get the caps for the
overlay. We can change the code to get the caps directly from dss
features, thus removing the dependency to struct omap_overlay.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-18 13:11:12 +03:00
Tomi Valkeinen 881c98ff62 OMAPDSS: remove declarations for non-existing funcs
dss_mgr_set_device and dss_mgr_unset_device are declared in dss.h, but
the functions do not exist. Remove the declarations.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-18 13:11:11 +03:00
Tomi Valkeinen fb2cec1f72 OMAPDSS: combine LCD related config into one func
Dispc has a bunch of functions used to configure output related
parameters:

- dispc_mgr_set_io_pad_mode
- dispc_mgr_enable_stallmode
- dispc_mgr_enable_fifohandcheck
- dispc_mgr_set_clock_div
- dispc_mgr_set_tft_data_lines
- dispc_lcd_enable_signal_polarity
- dispc_mgr_set_lcd_type_tft

These are all called together, and the configuration values are taken
from struct dss_lcd_mgr_config.

Instead of exposing those individual dispc functions, create a new one,
dispc_mgr_set_lcd_config(), which is used to configure the above
parameters from values in struct dss_lcd_mgr_config.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-18 13:11:11 +03:00
Tomi Valkeinen a8f3fcd1a2 OMAPDSS: DISPC: constify function parameters
Add consts to dispc function parameters which do not modify the passed
structs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-18 13:11:11 +03:00
Tomi Valkeinen d7b6b6b1e7 OMAPDSS: fix registering the vsync isr in apply
When we enable an output we don't check if we need to register the vsync
isr. This causes us to miss vsync interrupts until somebody changes the
configuration of an overlay or an overlay manager.

Add the registration to dss_mgr_enable to fix the problem.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-18 13:11:10 +03:00
Tomi Valkeinen 78e7f256b2 OMAPDSS: DSI: fix dsi_get_dsidev_from_id()
If dsi_get_dsidev_from_id() is called with a DSI module id that does not
exist on the board, the function will crash as omap_dss_get_output()
will return NULL.

This happens on omap3 boards when dumping DSI clocks, as the dumping
code will try to get the dsidev for DSI modules 0 and 1, but omap3 only
has DSI module 0.

Also clean up the id -> output mapping, so that if the function is
called with invalid module ID it will return NULL.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Archit Taneja <archit@ti.com>
2012-10-18 13:11:10 +03:00
Tomi Valkeinen 7a992d3ebd Merge branch '3.8/vrfb-conversion'
Merge omap vrfb code to remove direct omap platform dependencies from the
driver.
2012-10-18 11:03:17 +03:00
Tomi Valkeinen 9253d2d861 Merge branch '3.8/dss-version'
Merge omapdss code to remove cpu_is_* checks from the driver.
2012-10-18 11:02:51 +03:00
Tomi Valkeinen a89d1a87ad OMAPFB: use omap_vrfb_supported()
Replace cpu_is_*() check with omap_vrfb_supported().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-17 12:18:14 +03:00
Tomi Valkeinen aa1e49a375 OMAPDSS: VRFB: add omap_vrfb_supported()
Add an exported function omap_vrfb_supported() which returns true if the
vrfb driver has been loaded succesfully. This can be used to decide if
VRFB can be used or not.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-17 12:17:18 +03:00
Tomi Valkeinen 6a1c9f6d19 OMAP: move arch/arm/plat-omap/include/plat/vrfb.h
Now that vrfb driver is not omap dependent anymore, we can move vrfb.h
from arch/arm/plat-omap/include/plat to include/video/omapvrfb.h.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
2012-10-17 12:11:12 +03:00
Tomi Valkeinen 406c8563a7 OMAP: VRFB: convert vrfb to platform device
This patch converts vrfb library into a platform device, in an effort to
remove omap dependencies.

The platform device is registered in arch/arm/plat-omap/fb.c and
assigned resources depending on whether running on omap2 or omap3.

The vrfb driver will parse those resources and use them to access vrfb
configuration registers and the vrfb virtual rotation areas.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
2012-10-17 12:09:35 +03:00
Tomi Valkeinen 97fbd0fc9f OMAPDSS: remove Kconfig dependencies
Now that omapdss no longer uses any platform specific functions, we can
remove the "depends on ARCH_OMAP*" lines from Kconfig.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-17 11:57:09 +03:00
Tomi Valkeinen 311d5ce88a OMAPDSS: fix compilation warnings
When compiling on x86 we get following warnings:

warning: field width specifier ‘*’ expects argument of type ‘int’, but
argument 5 has type ‘size_t’ [-Wformat]

Fix these by casting the size_t to int.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-17 11:57:08 +03:00
Tomi Valkeinen 33366d0e8b OMAPDSS: add missing sizes.h includes
When compiling on x86, we get compilation errors for dss.c and dispc.c:

drivers/video/omap2/dss/dispc.c:126:11: error: ‘SZ_4K’ undeclared here
(not in a function)

include <linux/sizes.h> to fix compilation.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-17 11:57:08 +03:00
Tomi Valkeinen 35f70935c6 OMAPDSS: remove <plat/cpu.h> includes
cpu_is_* calls are no longer used in omapdss, so the includes for
<plat/cpu.h> can be removed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-17 11:57:07 +03:00
Peter Ujfalusi da6c568739 OMAPDSS: Correct check for the callback pointer in dss_dsi_disable_pads()
Appear to be a copy-paste bug: the code was checking board_data->dsi_enable_pads
while calling board_data->dsi_disable_pads.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-17 09:26:08 +03:00
Tomi Valkeinen 6fa44907ee OMAPDSS: HDMI: use omapdss_version
Use omapdss_version in hdmi.c to select the proper hdmi features.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-16 13:44:00 +03:00
Tomi Valkeinen bd81ed0818 OMAPDSS: DSS: use omapdss_version
Use omapdss_version in dss.c to select the proper dss features.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-16 13:43:59 +03:00
Tomi Valkeinen 84b4762302 OMAPDSS: DISPC: use omapdss_version
Use omapdss_version in dispc.c to select the proper dispc features.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-16 13:43:58 +03:00
Tomi Valkeinen 649514c65c OMAPDSS: use omapdss_version in dss_features.c
Pass the omapdss_version to dss_features.c and use it to select the
proper dss features.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-16 13:43:57 +03:00
Tomi Valkeinen e7d9facf0b Linux 3.7-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJQezF+AAoJEHm+PkMAQRiG2wkIAIpxXCCZo8SsxOimo0jkb50r
 Ouufv/92lz7LNqPEsaQDYXNni+1ObEnADU2XbXdfJ6pdQkfw3Phu/IIzZAufIS21
 ZTDgK04D1HA0inx8ywHr96bSEfHu0RCuj5jMu2/N5F5jZbvvaHpeIaCfKWXtQ2Tg
 yAuFY6mp6MVXCJPnJbvb5inVpDlfAXCHQ4BLFHQL0MhfPW0eNHhgyWJQsn8UywxK
 rYdIet1RAL+iY+C7gr5SIRXRg0CF8zAyBRJMIyB8kfY26YvwEy75zHf1TavxtT1X
 o4B/WSqO4JbAM4yuRFFpb/ehNtfalxLX7JFexSHzBRev95yllQ6a3UTgtM1Ch8E=
 =Vg7R
 -----END PGP SIGNATURE-----

Merge tag 'v3.7-rc1'

Merge Linux 3.7-rc1 to get latest upstream changes.
2012-10-16 13:30:09 +03:00
Chandrabhanu Mahapatra 28bcd199cc OMAPDSS: Remove dss_debug variable
All the debug prints have been replaced with pr_debug(). Thus, the dependency on
dss_debug variable is replaced with dyndbg in dynamic debugging mode and DEBUG
flag otherwise. So, the dss_debug variable is removed along with checks for
DEBUG flag.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Reviewed-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-12 14:15:31 +03:00
Chandrabhanu Mahapatra f30be7d326 OMAPDSS: Replace multi part debug prints with pr_debug
The various functions in dispc and dsi such as print_irq_status(),
print_irq_status_vc(), print_irq_status_cio() and _dsi_print_reset_status()
consist of a number of debug prints which need to be enabled all at once or none
at all. So, these debug prints in corresponding functions are replaced with one
dynamic debug enabled pr_debug() each.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Reviewed-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-12 14:15:30 +03:00
Chandrabhanu Mahapatra 702d267eb8 OMAPDSS: Cleanup DSSDBG with dynamic pr_debug function
The printk in DSSDBG function definition is replaced with dynamic debug enabled
pr_debug(). The use of dynamic debugging provides more flexibility as each debug
statement can be enabled or disabled dynamically on basis of source filename,
line number, module name etc., by writing to a control file in debugfs
filesystem. For better understanding please refer to
Documentation/dynamic-debug-howto.txt.

The DSSDBGF() differs from DSSDBG() by providing function name. However,
function name, line number, module name and thread ID can be printed through
dynamic debug by setting appropriate flags 'f','l','m' and 't' in the debugfs
control file. So, DSSDBGF instances are replaced with DSSDBG.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Reviewed-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-12 14:15:30 +03:00
Chandrabhanu Mahapatra 1b3bcb33fb OMAPDSS: Create new debug config options
The config option CONFIG_OMAP2_DSS_DEBUG_SUPPORT has been removed and replaced
with CONFIG_OMAP2_DSS_DEBUG and CONFIG_OMAP2_DSS_DEBUGFS. CONFIG_OMAP2_DSS_DEBUG
enables DEBUG flag and CONFIG_OMAP2_DSS_DEBUGFS enables creation of debugfs for
OMAPDSS. Both the config options are disabled by default and can be enabled
independently of one another as per convenience.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Reviewed-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-12 14:15:30 +03:00
Chandrabhanu Mahapatra 7ad6623a49 OMAPDSS: Move definition of DEBUG flag to Makefile
In OMAPDSS the DEBUG flag is set only after the OMAPDSS module is called, for
which the debugging capabilities are available only after its proper
initialization. As a result of which tracking of bugs prior to or during initial
process becomes difficult. So, the definition of DEBUG is being moved to the
corresponding Makefile.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Reviewed-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-10-12 14:15:29 +03:00
Linus Torvalds 5f76945a9c fbdev updates for 3.7
It includes:
 - large updates for OMAP
   - basic OMAP5 DSS support for DPI and DSI outputs
   - large cleanups and restructuring
 - some update to Exynos and da8xx-fb
 - removal of the pnx4008 driver (arch removed)
 - various other small patches
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQdz+EAAoJECSVL5KnPj1PyiMP/R84rSfGUbDIh0Cr6g1Snk76
 h2/1i19TuEgJAWH1q0lnwhqMC3yYmkA1Hz3ulT35KS+/L3IEgUosOESrxZIJhxHI
 f55pk3v8dueN0rx3OhCknLT7hGpVsI4vSN+3yf9LetDp3qt8UVwKLFzVij1VF/MS
 b1wA+RBe1IYMR0bB6pK0AgMZZiBkQMta5rKs5IfDDi8kMgMT4+V8l/iFmt2Ue833
 VxdPw+3reKshBXKTkQt1Usv4JRtG7OgwpRmFhxOo+ag0dxPLeUe/3wZG54qfOywF
 7jK+mnxmW8oZxLkGBvygrmzd40MH6H09N7i/IKVQ0GZoHgAqWWe7VvWahpg8LzwB
 ynktwWZ3Va98p5u/BIafBr0ZOU30mPL8N0aqR3HU7H12Wq21HtwcF+ewiT4vnMc8
 CKzt6VL0qY1tOOdzJzmICzvXGkbBGfj9YOUptJALCIa3bLwZodyQ/bKq8V/bHdTg
 2yyUmVhVf/r5qLermjQN8TjFMpRf2SNwTUUYvhUNwZ4yZMVWZgjjhtAlGGFCA/Bs
 qMRuNpbHMedhzNV4py418Xe3Hwg6TLPuWSWGJ67SG8hxsYy2hq7GebSsXXdC7xG9
 N5DMpA88IQR2nLwkr/pslFqjRsUI6ULvIfxibHEoNjQ0GOY9f+hEWbdHBZPI+0Gv
 Ea9d7nyhmYTZgvRcd9U0
 =EJUS
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-updates-for-3.7' of git://github.com/schandinat/linux-2.6

Pull fbdev updates from Florian Tobias Schandinat:
 "This includes:
   - large updates for OMAP
     - basic OMAP5 DSS support for DPI and DSI outputs
     - large cleanups and restructuring
   - some update to Exynos and da8xx-fb
   - removal of the pnx4008 driver (arch removed)
   - various other small patches"

Fix up some trivial conflicts (mostly just include line changes, but
also some due to the renaming of the deferred work functions by Tejun).

* tag 'fbdev-updates-for-3.7' of git://github.com/schandinat/linux-2.6: (193 commits)
  gbefb: fix compile error
  video: mark nuc900fb_map_video_memory as __devinit
  video/mx3fb: set .owner to prevent module unloading while being used
  video: exynos_dp: use clk_prepare_enable and clk_disable_unprepare
  drivers/video/exynos/exynos_mipi_dsi.c: fix error return code
  drivers/video/savage/savagefb_driver.c: fix error return code
  video: s3c-fb: use clk_prepare_enable and clk_disable_unprepare
  da8xx-fb: save and restore LCDC context across suspend/resume cycle
  da8xx-fb: add pm_runtime support
  video/udlfb: fix line counting in fb_write
  OMAPDSS: add missing include for string.h
  OMAPDSS: DISPC: Configure color conversion coefficients for writeback
  OMAPDSS: DISPC: Add manager like functions for writeback
  OMAPDSS: DISPC: Configure writeback FIFOs
  OMAPDSS: DISPC: Configure writeback specific parameters in dispc_wb_setup()
  OMAPDSS: DISPC: Configure overlay-like parameters in dispc_wb_setup
  OMAPDSS: DISPC: Add function to set channel in for writeback
  OMAPDSS: DISPC: Don't set chroma resampling bit for writeback
  OMAPDSS: DISPC: Downscale chroma if plane is writeback
  OMAPDSS: DISPC: Configure input and output sizes for writeback
  ...
2012-10-12 10:21:02 +09:00
Konstantin Khlebnikov 314e51b985 mm: kill vma flag VM_RESERVED and mm->reserved_vm counter
A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA,
currently it lost original meaning but still has some effects:

 | effect                 | alternative flags
-+------------------------+---------------------------------------------
1| account as reserved_vm | VM_IO
2| skip in core dump      | VM_IO, VM_DONTDUMP
3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP
4| do not mlock           | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP

This patch removes reserved_vm counter from mm_struct.  Seems like nobody
cares about it, it does not exported into userspace directly, it only
reduces total_vm showed in proc.

Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP.

remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP.
remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP.

[akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:19 +09:00
Linus Torvalds 033d9959ed Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue changes from Tejun Heo:
 "This is workqueue updates for v3.7-rc1.  A lot of activities this
  round including considerable API and behavior cleanups.

   * delayed_work combines a timer and a work item.  The handling of the
     timer part has always been a bit clunky leading to confusing
     cancelation API with weird corner-case behaviors.  delayed_work is
     updated to use new IRQ safe timer and cancelation now works as
     expected.

   * Another deficiency of delayed_work was lack of the counterpart of
     mod_timer() which led to cancel+queue combinations or open-coded
     timer+work usages.  mod_delayed_work[_on]() are added.

     These two delayed_work changes make delayed_work provide interface
     and behave like timer which is executed with process context.

   * A work item could be executed concurrently on multiple CPUs, which
     is rather unintuitive and made flush_work() behavior confusing and
     half-broken under certain circumstances.  This problem doesn't
     exist for non-reentrant workqueues.  While non-reentrancy check
     isn't free, the overhead is incurred only when a work item bounces
     across different CPUs and even in simulated pathological scenario
     the overhead isn't too high.

     All workqueues are made non-reentrant.  This removes the
     distinction between flush_[delayed_]work() and
     flush_[delayed_]_work_sync().  The former is now as strong as the
     latter and the specified work item is guaranteed to have finished
     execution of any previous queueing on return.

   * In addition to the various bug fixes, Lai redid and simplified CPU
     hotplug handling significantly.

   * Joonsoo introduced system_highpri_wq and used it during CPU
     hotplug.

  There are two merge commits - one to pull in IRQ safe timer from
  tip/timers/core and the other to pull in CPU hotplug fixes from
  wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."

Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.

Tejun pointed out a few of them, I fixed a couple more.

* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
  workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
  workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
  workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
  workqueue: remove @delayed from cwq_dec_nr_in_flight()
  workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
  workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
  workqueue: use __cpuinit instead of __devinit for cpu callbacks
  workqueue: rename manager_mutex to assoc_mutex
  workqueue: WORKER_REBIND is no longer necessary for idle rebinding
  workqueue: WORKER_REBIND is no longer necessary for busy rebinding
  workqueue: reimplement idle worker rebinding
  workqueue: deprecate __cancel_delayed_work()
  workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
  workqueue: use mod_delayed_work() instead of __cancel + queue
  workqueue: use irqsafe timer for delayed_work
  workqueue: clean up delayed_work initializers and add missing one
  workqueue: make deferrable delayed_work initializer names consistent
  workqueue: cosmetic whitespace updates for macro definitions
  workqueue: deprecate system_nrt[_freezable]_wq
  workqueue: deprecate flush[_delayed]_work_sync()
  ...
2012-10-02 09:54:49 -07:00
Tomi Valkeinen 13b1ba7de8 OMAPDSS: add missing include for string.h
Both dpi.c and sdi.c use strcmp(), but do not include string.h. With
some Kconfig options string.h is included implicitly, but with some
other the compilation fails:

drivers/video/omap2/dss/dpi.c:407:5: error: implicit declaration of
function 'strcmp'

Include string.h in both dpi.c and sdi.c

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-28 10:03:03 +03:00
Archit Taneja 6e5264b038 OMAPDSS: DISPC: Configure color conversion coefficients for writeback
Writeback pipeline receives RGB data from one of the overlays or one of the
overlay managers. If the target color mode is YUV422 or NV12, we need to convert
the RGB pixels to YUV. The scaler in WB then converts it to the target color
mode.

Hence, the color conversion coefficients that need to be programmed are the ones
which convert a RGB24 pixel to YUV444. Program these coefficients for writeback
pipeline.

Rearrange the code a bit to configure different coefficients for overlays and
writeback.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:51 +03:00
Archit Taneja 0b23e5b868 OMAPDSS: DISPC: Add manager like functions for writeback
Add functions to enable writeback, and set/check state of GO bit. These bits are
identical in behaviour with the corresponding overlay manager bits. Configure
them in a similar way to mgr_enable() and mgr_go_* functions. Add a helper to
get the FRAMEDONE irq corresponding to writeback.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:51 +03:00
Archit Taneja 8bbe09ee4d OMAPDSS: DISPC: Configure writeback FIFOs
Extend the DISPC fifo functions to also configure the writeback FIFO thresholds.

The most optimal configuration for writeback is to push out data to the
interconnect the moment writeback pushes enough pixels in the FIFO to form a
burst. This reduces the chance of writeback overflowing it's FIFO.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:51 +03:00
Archit Taneja 9e4a0fc765 OMAPDSS: DISPC: Configure writeback specific parameters in dispc_wb_setup()
Configure some of the writeback specific parameters in dispc_wb_setup(). The
writeback parameters configured are:

truncation: This needs to be set if the color depth input to writeback is more
than the color depth of the color mode we want to store in memory.

writeback mode: This configures whether we want to use writeback in mem to mem
or capture mode. This information will be directly passed by APPLY later.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:51 +03:00
Archit Taneja 749feffa6b OMAPDSS: DISPC: Configure overlay-like parameters in dispc_wb_setup
Create struct omap_dss_writeback_info, this is similar to omap_overlay_info,
the major difference is that there is no parameter which describes the input
size to writeback, this is because this is always fixed, and decided by the
connected overlay or overlay manager. One more difference is that screen_width
is renamed to buf_width, to give the value of stride the writeback buffer has.

Call dispc_ovl_setup_common() through dispc_wb_setup() to configure overlay-like
parameters. The parameters in dispc_ovl_setup_common() which do not hold for
writeback are filled passed as zeroes or false, the code takes care of not
configuring them as they won't possess the needed overlay caps.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:50 +03:00
Archit Taneja d9ac773cd0 OMAPDSS: DISPC: Add function to set channel in for writeback
Writeback can take input from either one of the overlays, or one of the overlay
managers. Add an enum which represents the channel_in for writeback, and maps
to the register field programming.

Add a function to configure channel in for writeback. This will be used later in
APPLY.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:50 +03:00
Archit Taneja 2a5561b1f7 OMAPDSS: DISPC: Don't set chroma resampling bit for writeback
The bit YUVCHROMARESAMPLING isn't there for writeback in DISPC_WB_ATTRIBUTES2.
It isn't there because we don't upsample chroma like for video pipelines, we
downsample chroma in writeback to get YUV422 or NV12 formats from the YUV444
input.

Ignore this bit in dispc_ovl_set_scaling_uv() if the plane is OMAP_DSS_WB.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:50 +03:00
Archit Taneja f92afae2af OMAPDSS: DISPC: Downscale chroma if plane is writeback
When converting YUYV444 content to YUV422 or NV12 formats through writeback
pipeline, the scaler needs to downscale the chroma plane. Ensure that chroma
is downscaled when the pipeline is writeback.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:50 +03:00
Archit Taneja 36d87d9558 OMAPDSS: DISPC: Configure input and output sizes for writeback
Writeback uses the WB_PICTURE_SIZE register to define the size of the content
written to memory, this is the output of the scaler. It uses the WB_SIZE
register to define the size of the content coming from the overlay/manager to
which it is connected, this is the input to the scaler. This naming is different
as compared to overlays.

Add checks for writeback in dispc_ovl_set_input_size() and
dispc_ovl_set_output_size() to write to the correct registers.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:50 +03:00
Archit Taneja 7a155be39e OMAPDSS: DISPC: Add writeback register offsets and dss features structs
Since writeback has many overlay like properties, and most of it's registers are
similar to that of overlays, it's possible to reuse most of the overlay related
DISPC code for writeback when considering it as a plane. Writeback was added as
a plane in the omap_plane field as OMAP_DSS_WB.

Add the writeback register offsets in dispc.h, add minimal WB plane related info
needed in dss_features. Add a function which returns the number of writeback
pipelines an OMAP version has.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:50 +03:00
Archit Taneja 20fbb50be4 OMAPDSS: DISPC: Allow both upscaling and downscaling of chroma
In the function dispc_plane_set_scaling_uv(), create a parameter which tells if
we want to upscale or downscale the chroma plane.

Downscaling of chroma is required by writeback pipeline for converting the input
YUV444 color format to YUV422 or NV12.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:49 +03:00
Archit Taneja 8ba85306ba OMAPDSS: DIPSC: Relax scaling limitations when in memory to memory mode
The scalers of overlays and writeback do not have any constraints on downscale
ratio when operating in memory to memory mode.

This is because in memory to memory mode, we aren't connected to a display which
needs data output at the rate of pixel clock. The scalers can perform as much
downscaling as needed, the rate at which the scaler outputs is adjusted
accordingly.

Relax constraints related to downscaling based on whether the input overlays are
connected to writeback in memory to memory mode. We pass a mem_to_mem boolean
parameter to dispc_ovl_setup() from APPLY. This is currently set to false, this
will later be configured to the correct value based on whether the overlay is
connected to writeback or not. Do the same later for writeback when writeback is
configured.

In the scaling calculation code, we calculate the minimum amount of core clock we
need to achieve the required downscaling. If we are in memory to memory mode, we
set this to a very small value(1 in this case), this value would always be
lesser than the actual DISPC core clock value, and hence the scaling checks
would succeed.

We take care that pixel clock isn't calculated for writeback and the overlays
connected to it when in memory to memory mode. A pixel clock in such cases
doesn't make sense.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:49 +03:00
Archit Taneja 3e8a6ff248 OMAPDSS: DISPC: Don't pass channel out when configuring overlays
dispc_ovl_setup_common() is to be used by both overlays and writeback. We pass
channel out to figure out what manager the overlay is connected to, to determine
the pixel clock rate. This is used to decide the scaling limitations for that
overlay.

writeback doesn't have a channel out, it has a channel in field which tells
where writeback gets its input from. These are 2 different fields, and this
prevents us reusing the overlay configuration code for writeback.

To overcome this, we now pass omap_plane to overlay related functions rather
than passing channel out. We create helper functions which can derive pclk/lclk
from the omap_plane id.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:49 +03:00
Archit Taneja 84a880fd51 OMAPDSS: DISPC: Make dispc_ovl_setup call dispc_ovl_setup_common
Add a new static function called dispc_ovl_setup_common(). This function is used by
dispc_ovl_setup() to configure the overlay registers. This split is done so that
dispc_wb_setup() can reuse overlay register configuration related code.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:49 +03:00
Archit Taneja d79db85300 OMAPDSS: OVERLAY: Add position and replication as overlay caps
Add position and replication as overlay caps, and pass overlay caps as an
argument to the corresponding functions. Adding position and replication to
overlay caps seems a bit unnecessary, but it allows us to use the
corresponding functions for writeback too.

These caps will be set for all overlays, but not for writeback. This is done
so writeback can reuse dispc_ovl_setup() to the maximum.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:49 +03:00
Archit Taneja 5b54ed3ec3 OMAPDSS: DISPC: Pass overlay caps as a parameter to dispc plane functions
Currently, the functions below take the omap_plane parameter and derive the
overlay caps within them. Pass the overlay caps as a parameter to the function
to allow these to be used by writeback too.

- dispc_ovl_set_zorder()
- dispc_ovl_set_pre_mult_alpha()
- dispc_ovl_setup_global_alpha()
- dispc_ovl_calc_scaling()
- dispc_ovl_setup()

These functions will be used for writeback later, and the caps will help in
deciding if they are to be used for writeback or not. This allows reuse of
overlay caps for writeback.

Using omap_overlay_caps for writeback seems a bit incorrect, but caps is
something already in use by users of OMAPDSS(omapfb/omap_vout), so we use
overlay caps for overlay like features of writeback too.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:49 +03:00
Archit Taneja 78b687fc4f OMAPDSS: DISPC: Simplify function names for setting pipeline input and output sizes
The DISPC pipeline register names in the TRM for setting the buffer size and
the output size are a bit misleading, for example, there are different register
names for setting the buffer size for VID and GFX pipes. Things get more
confusing when considering writeback pipeline.

Rename the functions so that they tell whether they are configuring the input
to the scalar or the output. These will be extended later to support writeback
registers.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:49 +03:00
Archit Taneja 8eeb7019a4 OMAPDSS: DISPC: Constify omap_overlay_info in dispc_ovl_setup()
The struct omap_overlay_info passed to dispc_ovl_setup() is used to configure
DISPC registers. It shouldn't modify the overlay_info structure. The pos_y field
was being changed in dispc_ovl_setup in the case of interlaced displays. Fix
this and const qualifier to the omap_overlay_info argument.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:48 +03:00
Archit Taneja 3c2995ac34 OMAPDSS: Remove old way of setting manager and device links
Now that an omap_dss_output can be used to link between managers and devices, we
can remove the old way of setting manager and device links. This involves
removing the device and manager pointers from omap_overlay_manager and
omap_dss_device respectively, and removing the set_device/unset_device ops from
omap_overlay_manager.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:38 +03:00
Archit Taneja 0f0e4e3cd8 OMAPDSS: APPLY: Remove omap_dss_device references from dss_ovl_enable/disable
An overlay isn't allowed to be enabled/disabled if it isn't connected to an
omap_dss_device. This requirement isn't needed any more. An overlay can be
enabled/disabled as long as it has an output connected to it. The output may
not be connected to a device, but we can be assured that the connected
manager's output is in use by an output interface.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:38 +03:00
Archit Taneja 80d81d64d6 OMAPDSS: OVERLAY/MANAGER: Get device via output
A manager is not connected to a device directly any more. It first connects
to an output, and then to the display. Update overlay and manager get_device ops
to return the device via the connected output.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:37 +03:00
Archit Taneja 947b225424 OMAPDSS: MANAGER: Update display sysfs store
The display sysfs attribute's store function needs to be changed with the
introduction of outputs.

The DSS driver ensures that there is one display per output, and that a
registered omap_dss_device will have an output connected to it. The display
sysfs store function unsets the current output connected to the manager, and
sets it with the output connected to the new display. If the new display doesn't
have an output for some reason, we just bail out. The function doesn't set/unset
output->device links. These remain the same as when the omap_dss_device was
registered.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:37 +03:00
Archit Taneja 952cbaaa9b OMAPFB: Change dssdev->manager references
To retrieve the manager pointer via a device, we need to now access it via the
output to which the device is connected. Make this change in omapfb_ioctl()
where the WAITFORVSYNC ioctl tries to access the manager's device.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:37 +03:00
Archit Taneja cea87b92da OMAPDSS: HDMI: Replace dssdev->manager with dssdev->output->manager references
With addition of output entities, a device connects to an output, and an output
connects to overlay manager. Replace the dssdev->manager references with
dssdev->output->manager to access the manager correctly.

When enabling the HDMI output, check whether the output entity connected to
display is not NULL.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:36 +03:00
Archit Taneja 8f1f736c45 OMAPDSS: VENC: Replace dssdev->manager with dssdev->output->manager references
With addition of output entities, a device connects to an output, and an output
connects to overlay manager. Replace the dssdev->manager references with
dssdev->output->manager to access the manager correctly.

When enabling the VENC output, check whether the output entity connected to
display is not NULL.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:36 +03:00
Archit Taneja 1db39c0a28 OMAPDSS: RFBI: Replace dssdev->manager with dssdev->output->manager references
With addition of output entities, a device connects to an output, and an output
connects to overlay manager. Replace the dssdev->manager references with
dssdev->output->manager to access the manager correctly.

When enabling the RFBI output, check whether the output entity connected to
display is not NULL.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:35 +03:00
Archit Taneja 7d6069e571 OMAPDSS: SDI: Replace dssdev->manager with dssdev->output->manager references
With addition of output entities, a device connects to an output, and an output
connects to overlay manager. Replace the dssdev->manager references with
dssdev->output->manager to access the manager correctly.

When enabling the SDI output, check whether the output entity connected to
display is not NULL.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:35 +03:00
Archit Taneja eea8340a1d OMAPDSS: DSI: Replace dssdev->manager with dssdev->output->manager references
With addition of output entities, a device connects to an output, and an output
connects to overlay manager. Replace the dssdev->manager references with
dssdev->output->manager to access the manager correctly.

When enabling the DSI output, check whether the output entity connected to
display is not NULL.

In dsi_init_display(), the display won't be connected to the DSI output yet,
that happens later in dss_recheck_connections() in the panel driver's probe. Get
the dsidev platform device pointer using the DSI moudle number provided in the
omap_dss_device struct.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:34 +03:00
Archit Taneja 400e65d1c9 OMAPDSS: DSI: Remove dsi_pdev_map global struct
dsi_pdev_map is a struct visible globally in the DSI driver to get the platform
device pointer of the DSI device corresponding to it's module ID. This was
required because there was no clean way to derive the platform device from
the DSI module instance number or from the connected panel.

With the new output entity, it is possible to retrieve the platform device
pointer if the omap_dss_output pointer is available. Modify the functions
dsi_get_dsidev_from_dssdev() dsi_get_dsidev_from_id() so that they use output
instead of dsi_pdev_map to retrieve the dsi platform device pointer.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:34 +03:00
Archit Taneja 5d512fcdf6 OMAPDSS: DPI: Replace dssdev->manager with dssdev->output->manager references
With addition of output entities, a device connects to an output, and an output
connects to overlay manager. Replace the dssdev->manager references with
dssdev->output->manager to access the manager correctly.

When enabling the DPI output, check whether the output entity connected to
display is not NULL.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:33 +03:00
Archit Taneja 3224827630 OMAPDSS: Create links between managers, outputs and devices
Links between DSS entities are made in dss_init_connections() when a panel
device is registered, and are removed in dss_uninit_connections() when the
device is unregistered. Modify these functions to incorporate the addition of
outputs.

The fields in omap_dss_device struct gives information on which output and
manager to connect to. The desired manager and output pointers are retrieved and
prepared to form the desired links. The output is linked to the device, and then
the manager to the output.

A helper function omapdss_get_output_from_device() is created to retrieve the
output from the display by checking it's type, and the module id in case of DSI.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:33 +03:00
Archit Taneja 4249e61e04 OMAPFB: remove manager->device references
With the introduction of output entities, managers will now connect to outputs.
Use the helper op for overlays named get_device. This will abstract away the
information on how to get the device from an overlay.

Using the helper function will reduce the number of pointer dereferences a user
of OMAPDSS needs to do and reduce risk of a NULL dereference.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:32 +03:00
Archit Taneja 794bc4eefa OMAPDSS: Remove manager->device references
With the introduction of output entities, managers will now connect to outputs.
Create helper ops for overlays and managers named get_device. This will abstract
away the information on how to get the device from an overlay or an overlay
manager. The get_device ops currently retrieve the output via a
ovl->manager->device reference. This will be later replaced by
ovl->manager->output->device references.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:31 +03:00
Archit Taneja 97f01b3a2e OMAPDSS: APPLY: Add manager set/unset output ops for omap_overlay_manager
Add set_output/unset_output ops for overlay managers, these form links between
managers and outputs. Create a function in dss features which tell all the
output instances that connect to a manager, use it when a manager tries to set
an output. Add a constraint of not unsetting an output when the manager is
enabled.

Keep the omap_dss_device pointer and set/unset_device ops in overlay_manager for
now to not break things. Keep the dss feature function get_supported_displays
as it's used in some places. These will be removed later.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 14:58:31 +03:00
Archit Taneja 6d71b923e5 OMAPDSS: output: Add set/unset device ops for omap_dss_output
An output entity represented by the struct omap_dss_output connects to a
omap_dss_device entity. Add functions to set or unset an output's device. This
is similar to how managers and devices were connected previously. An output can
connect to a device without being connected to a manager. However, the output
needs to eventually connect to a manager so that the connected panel can be
enabled.

Keep the omap_overlay_manager pointer in omap_dss_device for now to prevent
breaking things. This will be removed later when outputs are supported
completely.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 16:31:46 +05:30
Archit Taneja 81b87f515f OMAPDSS: outputs: Create and register output instances
Add output structs to output driver's private data. Register output instances by
having an init function in the probes of the platform device drivers for
different outputs. The *_init_output for each output registers the output and
fill up the output's plaform device, type and id fields. The *_uninit_output
functions unregister the output.

In the probe of each interface driver, the output entities are initialized
before the *_probe_pdata() functions intentionally. This is done to ensure that
the output entity is prepared before the panels connected to the output are
registered. We need the output entities to be ready because OMAPDSS will try
to make connections between overlays, managers, outputs and devices during the
panel's probe.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 16:30:49 +05:30
Archit Taneja 484dc404d2 OMAPDSS: outputs: Create a new entity called outputs
The current OMAPDSS design contains 3 software entities: Overlays, Managers and
Devices. These map to pipelines, overlay managers and the panels respectively in
hardware. One or more overlays connect to a manager to represent a composition,
the manager connects to a device(generally a display) to display the content.

The part of DSS hardware which isn't represented by any of the above entities
are interfaces/outputs that connect to an overlay manager, i.e blocks like DSI,
HDMI, VENC and so on. Currently, an overlay manager directly connects to the
display, and the output to which it is actually connected is ignored. The panel
driver of the display is responsible of calling output specific functions to
configure the output.

Adding outputs as a new software entity gives us the following benefits:

- Have exact information on the possible connections between managers and
  outputs: A manager can't connect to each and every output, there only limited
  hardware links between a manager's video port and some of the outputs.

- Remove hacks related to connecting managers and devices: Currently, default
  links between managers and devices are set in a not so clean way. Matching is
  done via comparing the device type, and the display types supported by the
  manager. This isn't sufficient to establish all the possible links between
  managers, outputs and devices in hardware.

- Make panel drivers more generic: The DSS panel drivers currently call
  interface/output specific functions to configure the hardware IP. When making
  these calls, the driver isn't actually aware of the underlying output. The
  output driver extracts information from the panel's omap_dss_device pointer
  to figure out which interface it is connected to, and then configures the
  corresponding output block. An example of this is when a DSI panel calls
  dsi functions, the dsi driver figures out whether the panel is connected
  to DSI1 or DSI2. This isn't correct, and having output as entities will
  give the panel driver the exact information on which output to configure.
  Having outputs also gives the opportunity to make panel drivers generic
  across different platforms/SoCs, this is achieved as omap specific output
  calls can be replaced by ops of a particular output type.

- Have more complex connections between managers, outputs and devices: OMAPDSS
  currently doesn't support use cases like 2 outputs connect to a single
  device. This can be achieved by extending properties of outputs to connect to
  more managers or devices.

- Represent writeback as an output: The writeback pipeline fits well in OMAPDSS
  as compared to overlays, managers or devices.

Add a new struct to represent outputs. An output struct holds pointers to the
manager and device structs to which it is connected. Add functions which can
register/unregister an output, or look for one. Create an enum which represent
each output instance.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 16:29:10 +05:30
Archit Taneja fc22a84339 OMAPDSS: APPLY: Remove omap_dss_device references in wait_for_go functions
The functions dss_mgr_wait_for_go() and dss_mgr_wait_for_go_ovl() check if there
is an enabled display connected to the manager before trying to see the state of
the GO bit.

The checks related to the display can be replaced by checking the state of the
manager, i.e, whether the manager is enabled or not. This makes more sense than
checking with the connected display as the GO bit behaviour is more connected
with the manager state rather than the display state. A GO bit can only be set
if the manager is enabled. If a manager isn't enabled, we can safely assume that
the GO bit is not set.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 16:29:09 +05:30
Archit Taneja 9e7e937222 OMAPDSS: DSI: Pass dsi platform device wherever possible
Many of the DSI functions receive the connected panel's omap_dss_device pointer
as an argument. The platform device pointer is then derived via omap_dss_device
pointers.

Most of these functions don't really require omap_dss_device pointer anymore
since we now keep copies of parameters in the driver data which were previously
available only via omap_dss_device. Replace the arguments with platform device
pointers for such functions.

Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26 16:29:07 +05:30
Tomi Valkeinen e84dc1cc15 OMAPDSS: DSI: fix tlpx_half reg field length
tlpx_half bit field in DSI_DSIPHY_CFG1 is [20,16], not [22,16] as
accessed in the code currently. Fix this.

The bug should not have caused any problems on OMAP3/4, as the bits
21,22 are unused. They are used on OMAP5, though.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-26 12:57:51 +03:00
Chandrabhanu Mahapatra d557a9cf2f OMAPDSS: DISPC: Add predecimation limit for TILER based rotations
In OMAP4 and OMAP5 when TILER 2D burst mode is used, a maximum of one line can
be skipped as per the respective TRMs. The MBlockStride OCP signal, which is
sum of ROWINC and image width in memory, is only 17 bits wide. In 2D mode TILER
supports 8192, 16384, 32768 and 65536 values of MBlockStride. In case when 2 or
more lines are skipped the ROWINC value exceeds 65536 resulting in OCP errors.
So, maximum vertical predecimation achievable is 2.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-25 16:41:11 +03:00
Tomi Valkeinen 406f7b8baa Merge OMAP5 DSS changes to omapdss
This series adds basic OMAP5 DSS functionality, mainly related to DSS core, DPI
and DSI.

* omap5-dss:
  OMAPDSS: DSI: make OMAP2_DSS_DSI depend on ARCH_OMAP5
  OMAPDSS: DSI: Add code to disable PHY DCC
  OMAPDSS: DSI: Add new linebuffer size for OMAP5
  OMAPDSS: DSI: Add FEAT_DSI_PLL_REFSEL
  OMAPDSS: DSI: Add FEAT_DSI_PLL_SELFREQDCO
  OMAPDSS: Add support for DPI source selection
  OMAPDSS: move dss feats to the end of dss.c
  OMAPDSS: Add basic omap5 features to dss and dispc
  OMAPDSS: DSI: improve DSI clock calcs for DISPC
2012-09-25 11:26:28 +03:00
Tomi Valkeinen c0ca7c38c5 Merge omapdss single-dssdev series
This series contains patches that change how omapdss's panel devices
(omap_dss_device) are initialized and registered. There are two patches that
change behaviour, the rest are just cleanups:

The patch "omap_dss_register_device() doesn't take display index" affects the
number for the "displayX" sysfs files. This hopefully doesn't affect the
userspace, as the number has never been a clear indication of what the
particular display is.

The patch "register only one display device per output" affects how panel
devices are created. Currently we support multiple panels per output, i.e. you
could have DVI and an LCD displays using the same DPI output, as long as the
DVI and LCD are not used at the same time.

This patch changes the omapdss driver to only register one display device per
output. If there are multiple displays for the output, either the first one is
picked or, if def_display has been defined in kernel parameters and the
def_display is one of the displays for this output, the def_display is picked.
See the patch for more information.

  OMAPDSS: alloc dssdevs dynamically
  OMAPDSS: cleanup dss_recheck_connections further
  OMAPDSS: cleanup dss_recheck_connections
  OMAPDSS: handle errors in dss_init_device
  OMAPDSS: explicitely initialize dssdev->channel for new displays
  OMAPDSS: register only one display device per output
  OMAPDSS: Add dss_get_default_display_name()
  OMAPDSS: omap_dss_register_device() doesn't take display index
2012-09-25 11:23:14 +03:00
Raphaël Assénat 524d9f48a6 OMAPDSS: Do not require a VDDS_DSI regulator on AM35xx
On our AM3505 based board, dpi.c complains that there is no VDDS_DSI
regulator and the framebuffer cannot be enabled. However, this check
does not seem to apply to AM3505/17 chips.

This patch adds new features list for AM35xxx, which is the same as for
OMAP3 except the VDDS_DSI is removed.

Signed-off-by: Raphael Assenat <raph@8d.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-25 11:20:37 +03:00
Tomi Valkeinen 995885897f OMAPDSS: DSI: make OMAP2_DSS_DSI depend on ARCH_OMAP5
Change omapdss Kconfig file to make OMAP2_DSS_DSI depend on ARCH_OMAP5.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-24 16:50:10 +03:00
Tomi Valkeinen 77ccbfbb07 OMAPDSS: DSI: Add code to disable PHY DCC
OMAP5 DSI PHY has DCC (Duty Cycle Corrector) block, and by default DCC
is enabled and thus the PLL clock is divided by 2 to get the DSI DDR
clk. This divider has been 4 for all previous OMAPs, and changing it
needs some reorganization of the code. The DCC can be disabled, and in
that case the divider is back to the old 4.

This patch adds dss feature for the DCC, and adds code to always disable
the DCC.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-24 16:50:10 +03:00
Tomi Valkeinen 2ac80fbea1 OMAPDSS: DSI: Add new linebuffer size for OMAP5
OMAP5's DSI has a larger line buffer than earlier OMAPs. This patch adds
support for this to the DSI driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-24 16:50:10 +03:00
Tomi Valkeinen 6d44610f83 OMAPDSS: DSI: Add FEAT_DSI_PLL_REFSEL
Add FEAT_DSI_PLL_REFSEL. OMAP5's DSI PLL needs configuration to select
the reference clock to be used. We always use SYSCLK.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-24 16:50:09 +03:00
Tomi Valkeinen f8ef3d6966 OMAPDSS: DSI: Add FEAT_DSI_PLL_SELFREQDCO
Add FEAT_DSI_PLL_SELFREQDCO. OMAP5's DSI PLL has a new configuration
option that needs to be programmed depending on the PLL's output clock
frequency.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-24 16:50:09 +03:00
Tomi Valkeinen de09e45555 OMAPDSS: Add support for DPI source selection
We can select the video source for DPI output as follows:

OMAP2/3: always LCD1
OMAP4: LCD2 or DIGIT
OMAP5: LCD1/LCD2/LCD3/DIGIT

This patch adds support to select the source, and makes dpi.c call the
function to set the source.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Anders <x0132446@ti.com>
2012-09-24 16:50:08 +03:00
Tomi Valkeinen 84273a9593 OMAPDSS: move dss feats to the end of dss.c
Move dss_features to the end of dss.c the same way they are in dispc.c,
so that we don't have to declare prototypes for static feat-related
functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-24 16:50:08 +03:00
Archit Taneja 2336283280 OMAPDSS: Add basic omap5 features to dss and dispc
Add basic omap5 features for dss and dispc.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-24 16:50:07 +03:00
Tomi Valkeinen d66b15818c OMAPDSS: DSI: improve DSI clock calcs for DISPC
Commit ee144e645a added
dsi_pll_calc_ddrfreq() which calculates PLL dividers based on given DSI
bus clock speed. The function works ok, but it can be improved for the
DISPC clock calc.

The current version calculates the clock going from the PLL to the DISPC
simply by setting the clock as close to DISPC maximum as possible, and
the pixel clock is calculated based on that.

This patch changes the function to calculate DISPC clock more
dynamically, iterating through different DISPC clocks and pixel clock
values, and thus we'll get more suitable pixel clocks.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-24 16:50:07 +03:00
Tomi Valkeinen 5274484b82 OMAPDSS: alloc dssdevs dynamically
We currently create omap_dss_devices statically in board files, and use
those devices directly in the omapdss driver. This model prevents us
from having the platform data (which the dssdevs in board files
practically are) as read-only, and it's also different than what we will
use with device tree.

This patch changes the model to be in line with DT model: we allocate
the dssdevs dynamically, and initialize them according to the data in
the board file's dssdev (basically we memcopy the dssdev fields).

The allocation and registration is done in the following steps in the
output drivers:

- Use dss_alloc_and_init_device to allocate and initialize the device.
  The function uses kalloc and device_initialize to accomplish this.
- Call dss_copy_device_pdata to copy the data from the board file's
  dssdev
- Use dss_add_device to register the device.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-18 16:15:05 +03:00
Tomi Valkeinen 5eeb55f870 OMAPDSS: cleanup dss_recheck_connections further
Cleanup dss_recheck_connections, move and rename it to a static
dss_init_connections function inside display.c. Improve the function to
return errors, and implement a matching dss_uninit_connections that can
be used to free the mgr->dssdev link.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-18 16:15:04 +03:00
Tomi Valkeinen 6b41785836 OMAPDSS: cleanup dss_recheck_connections
dss_recheck_connections is quite a mess. With the previous commit that
initializes the channel field for HDMI and VENC displays, we can greatly
simplify the dss_recheck_connections.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-18 16:15:04 +03:00
Tomi Valkeinen 47eb6763ff OMAPDSS: handle errors in dss_init_device
Add error handling to dss_init_device(), which has, for some reason,
been missing.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-18 16:15:03 +03:00
Tomi Valkeinen bcb226a925 OMAPDSS: explicitely initialize dssdev->channel for new displays
HDMI and VENC outputs always use the DIGIT output from DISPC. The dssdev
struct contains "channel" field which is used to specify the DISPC
output for the display, but this was not used for HDMI and VENC.

This patch fills the channel field explicitely for HDMI and VENC
displays so that we can always rely on the channel field.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-18 16:15:03 +03:00
Tomi Valkeinen 1521653c72 OMAPDSS: register only one display device per output
We have boards with multiple panel devices connected to the same
physical output, of which only one panel can be enabled at one time.
Examples of these are Overo, where you can use different daughter boards
that have different LCDs, and 3430SDP which has an LCD and a DVI output
and a physical switch to select the active display.

These are supported by omapdss so that we add all the possible display
devices at probe, but the displays are inactive until somebody enables
one. At this point the panel driver starts using the DSS, thus reserving
the physcal resource and excluding the other panels.

This is problematic:
- Panel drivers can't allocate their resources properly at probe(),
  because the resources can be shared with other panels. Thus they can
  be only reserved at enable time.
- Managing this in omapdss is confusing. It's not natural to have
  child devices, which may not even exist (for example, a daughterboard
  that is not connected).

Only some boards have multiple displays per output, and of those, only
very few have possibility of switching the display during runtime.
Because of the above points:
- We don't want to make omapdss and all the panel drivers more complex
  just because some boards have complex setups.
- Only few boards support runtime switching, and afaik even then it's
  not required. So we don't need to support runtime switching.

Thus we'll change to a model where we will have only one display device
per output and this cannot be (currently) changed at runtime. We'll
still have the possibility to select the display from multiple options
during boot with the default display option.

This patch accomplishes the above by changing how the output drivers
register the display device. Instead of registering all the devices
given from the board file, we'll only register one. If the default
display option is set, the output driver selects that display from its
displays. If the default display is not set, or the default display is
not one of the output's displays, the output driver selects the first
display.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-18 16:15:02 +03:00
Tomi Valkeinen 6a03fca96e OMAPDSS: Add dss_get_default_display_name()
Add function dss_get_default_display_name() which returns the name of
the default display, given from the board file or via module parameters.
The default display name can be used by output drivers to decide which
display is the wanted one.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-18 16:15:02 +03:00
Tomi Valkeinen 8768a52f8f OMAPDSS: omap_dss_register_device() doesn't take display index
We used to have all the displays of the board in one list, and we made a
"displayX" directory in the sysfs, where X was the index of the display
in the list.

This doesn't work anymore with device tree, as there's no single list to
get the number from, and it doesn't work very well even with non-DT as
we need to do some tricks to get the index nowadays.

This patch changes omap_dss_register_device() so that it doesn't take
disp_num as a parameter anymore, but uses a private increasing counter
for the display number.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-18 16:10:32 +03:00
Tony Lindgren 7d7e1eba7e ARM: OMAP2+: Prepare for irqs.h removal
As the interrupts should only be defined in the platform_data, and
eventually coming from device tree, there's no need to define them
in header files.

Let's remove the hardcoded references to irqs.h and fix up the includes
so we don't rely on headers included in irqs.h. Note that we're
defining OMAP_INTC_START as 0 to the interrupts. This will be needed
when we enable SPARSE_IRQ. For some drivers we need to add
#include <plat/cpu.h> for now until these drivers are fixed to
remove cpu_is_omapxxxx() usage.

While at it, sort som of the includes the standard way, and add
the trailing commas where they are missing in the related data
structures.

Note that for drivers/staging/tidspbridge we just define things
locally.

Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12 18:06:30 -07:00
Archit Taneja fda7c362f9 OMAPFB: Clear framebuffers before they are registered
The framebuffers are cleared with the function omapfb_clear_fb(), which
internally calls cfb_fillrect(). The boot logo is copied on to the
framebuffer when the fb device is registered with fb framework.

omapfb_clear_fb() is called after the framebuffer is registered, leading to
the boot logo getting cleared. Clear the framebuffers using omapfb_clear_fb()
before registering the framebuffer devices.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-11 13:51:28 +03:00
Tomi Valkeinen 6659145746 Merge branch 'fbdev-for-linus' of git://github.com/schandinat/linux-2.6
Merge omapfb and OMAP SDI fixes:

* OMAPFB: fix framebuffer console colors
* OMAPDSS: Fix SDI PLL locking

Conflicts:
	drivers/video/omap2/dss/sdi.c
2012-09-11 11:28:59 +03:00
Tomi Valkeinen b2f5976c10 OMAPDSS: fix dss_ovl_unset_manager
When we removed fifomerge support, we also changed dss_ovl_disable so
that it doesn't wait for the hardware to be finished with the overlay.
This may cause a problem when changing the overlay's manager, as
changing the manager is an immediate change. Thus if the overlay is
still being used by the HW when the manager is changed, there may be
glitches on the screen.

This patch adds a wait into dss_ovl_unset_manager, which ensures the
overlays are disabled in the HW.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:14 +03:00
Tomi Valkeinen b82fe7f025 OMAPDSS: fix set_timings
set_timings function of DSS's output drivers are not consistent. Some of
them disable the output, set the timings, and re-enable the output. Some
set the timings on the fly, while the output is enabled. And some just
store the given timings, so that they will be taken into use next time
the output is enabled.

We require the DISPC output to be disabled when changing the timings,
and so we can change all the output drivers' set_timings to just store
the given timings.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:13 +03:00
Tomi Valkeinen 66a0f9e4ac OMAPDSS: Use WB fifo for GFX overlay
OMAP4's GFX overlay has smaller fifo than the rest of the overlays
(including writeback "overlay"). This seems to be the reason for
underflows in some more demanding scenarios.

We can avoid the problems by using the WB fifo for GFX overlay, and vice
versa. WB usage is not supported yet, but when it will, it should
perform just fine with smaller fifo as there are no hard realtime
constraints with WB.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:13 +03:00
Tomi Valkeinen 42a6961cf6 OMAPDSS: Improve fifo management code
OMAP4+ allows assigning the overlay FIFOs freely, but that is not
supported by omapdss yet. This patch takes a step forward by improving
the fifo management to be more flexible.

dispc.c is changed to keep track of the sizes of each fifo, and also the
overlay using each fifo.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:13 +03:00
Tomi Valkeinen 85099f11bd Revert "OMAPDSS: APPLY: add fifo merge support funcs"
This reverts commit fb01197422.

Adding fifo merge feature as an omapdss internal configuration was a
mistake. We cannot hide from the users of omapdss the complexities of
fifo merge.

The previous commit removed fifo merge itself, and this removes the
remaining fifo merge support functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:12 +03:00
Tomi Valkeinen b3e93cbddd Revert "OMAPDSS: APPLY: add fifo-merge support"
This reverts commit 1d71f42b35.

Adding fifo merge feature as an omapdss internal configuration was a
mistake. We cannot hide from the users of omapdss the complexities of
fifo merge.

This commit removes the fifo merge support, which luckily is easily done
as it was handled totally inside apply.c. Note that this is not a 1:1
revert, but some resolving was needed for the dss_ovl_setup_fifo.

The plan is to try fifo merge again later when it is more clear how the
hardware acts in various situations, and how the omapdrm wants to use
fifo merge.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:12 +03:00
Tomi Valkeinen fed62e54ae OMAPDSS: clean up dss_mgr_set_timings
dss_mgr_set_timings() can only be called when the output is not active.
This means that most of the code in the function is extra, as there's no
need to write the values to registers, etc, because that will be handled
when the output will be enabled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:11 +03:00
Tomi Valkeinen aba965707c OMAPDSS: clean up dss_mgr_set_lcd_config
dss_mgr_set_lcd_config() can only be called when the output is not
active. This means that most of the code in the function is extra, as
there's no need to write the values to registers, etc, because that will
be handled when the output will be enabled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:11 +03:00
Tomi Valkeinen f6a0492ee0 OMAPDSS: split manager sysfs code
Separate sysfs code for managers to a separate file. This is a bit
cleaner, and will allow us later to easily switch off the sysfs support
via Kconfig option.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:10 +03:00
Tomi Valkeinen 916915161d OMAPDSS: split overlay sysfs code
Separate sysfs code for overlays to a separate file. This is a bit
cleaner, and will allow us later to easily switch off the sysfs support
via Kconfig option.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:10 +03:00
Tomi Valkeinen a6df3fd963 OMAPDSS: TFP410: use devm_gpio_request_one
Use devm_ version instead of the regular gpio_request_one to simplify
the error handling.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:09 +03:00
Tomi Valkeinen f075a594d7 OMAPDSS: Taal: Reogranize for device tree
Reorganize taal driver to make it easier to integrate device tree code.
Instead of storing the panel's platform data, we'll "parse" the platform
data and store the required information in driver's own data. This way
adding device tree data parsing is simple.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:09 +03:00
Tomi Valkeinen 5ae1f3723f OMAPDSS: VRAM: Remove clearing with sDMA
Currently vram.c clears the allocated memory automatically using OMAP
system DMA. In an effort to reduce OMAP dependencies, we'll do the
memory clear with CPU from now on.

The previous patch implemented memory clear in the omapfb driver, and
this patch removes the now obsolete clear functionality from vram.c.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
2012-09-07 20:02:09 +03:00
Tomi Valkeinen ca44415872 OMAPFB: clear framebuffers with CPU
Currently vram.c clears the allocated memory automatically using OMAP
system DMA. In an effort to reduce OMAP dependencies, we'll do the
memory clear with CPU from now on.

This patch implements clearing of the framebuffer in omapfb, using
cfb_fillrect() to do the actual clear.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:08 +03:00
Tomi Valkeinen fe6a466283 OMAPDSS: remove unnecessary includes
Remove unnecessary includes from omapdss.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:08 +03:00
Tomi Valkeinen 5e56ad44b4 OMAPDSS: Taal: use devm_* functions
Use devm_ functions in panel-taal.c's probe when possible. Also reorder
the initialization sequence so that devm_ allocations are done before
things that require explicit freeing. This simplifies the probe and
remove functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:06 +03:00
Tomi Valkeinen ab585254ba OMAPDSS: fix use of dssdev->caps
Recent commit dca2b1522c (OMAPDSS: DSI:
Maintain copy of operation mode in driver data) broke DSI for video mode
displays. The commit changed the way dssdev->caps are initialized, and
the result was that every DSI display is initialized with manual-update
and tear-elim caps.

The code that sets dssdev->caps is not very good, even when fixed.
omapdss driver shouldn't be writing dssdev->caps at all.

This patch fixes the problem with video mode displays by moving the
initialization of dssdev->caps to the panel driver. The same change is
done for RFBI.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:06 +03:00
Tomi Valkeinen ee144e645a OMAPDSS: DSI: calculate dsi clock
Currently the way to configure clocks related to DSI (both DSI and DISPC
clocks) happens via omapdss platform data. The reason for this is that
configuring the DSS clocks is a very complex problem, and it's
impossible for the SW to know requirements about things like
interference.

However, for general cases it should be fine to calculate the dividers
for clocks in the SW. The calculated clocks are probably not perfect,
but should work.

This patch adds support to calculate the dividers when using DSI command
mode panels. The panel gives the required DDR clock rate and LP clock
rate, and the DSI driver configures itself and DISPC accordingly.

This patch is somewhat ugly, though. The code does its job by modifying
the platform data where the clock dividers would be if the board file
gave them. This is not how it's going to be in the future, but allows us
to have quite simple patch and keep the backward compatibility.

It also allows the developer to still give the exact dividers from the
board file when there's need for that, as long as the panel driver does
not override them.

There are also other areas for improvement. For example, it would be
better if the panel driver could ask for a DSI clock in a certain range,
as, at least command mode panels, the panel can work fine with many
different clock speeds.

While the patch is not perfect, it allows us to remove the hardcoded
clock dividers from the board file, making it easier to bring up a new
panel and to use device tree from omapdss.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:05 +03:00
Tomi Valkeinen bc63f30441 OMAPDSS: Add DSI fclk maximum to dss_features
Add max value of DSI functional clock to dss_features, so that DSI
driver can use it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:05 +03:00
Tomi Valkeinen 174869435e OMAPDSS: HDMI: use vdda_hdmi_dac
The HDMI driver requires vdda_hdmi_dac power for operation, but does not
enable it. This has worked because the regulator has been always
enabled.

But this may not always be the case, as I encountered when implementing
HDMI device tree support.

This patch changes the HDMI driver to use the vdda_hdmi_dac.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:04 +03:00
Tomi Valkeinen a84b20654b OMAPDSS: HDMI: Add delay to wait for 5V power
TPD12S015A spec says to wait 300us after setting CT_CP_HPD gpio for the
5V power output to reach 90% of the voltage. This patch adds the delay
to the driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-09-07 20:02:03 +03:00
Tomi Valkeinen cca35017ca OMAPDSS: HDMI: Move GPIO handling to HDMI driver
We currently manage HDMI GPIOs in the board files via
platform_enable/disable calls. This won't work with device tree, and in
any case the correct place to manage the GPIOs is in the HDMI driver.

This patch moves the handling of the GPIOs to the HDMI driver. The GPIO
handling is moved to the common hdmi.c file, and this probably needs to
be revisited when adding OMAP5 HDMI support to see if the GPIO handling
needs to be moved to IP specific files.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2012-09-07 20:01:49 +03:00
Tomi Valkeinen c50e86ce7c Linux 3.6-rc4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJQQkiRAAoJEHm+PkMAQRiGk64H/Rp67mBWom2xMmU8gul3gr7d
 MFq7dQOShoHZVyuCtKFNF+RTFkHDT2mw0ZkdszHdMkPEznIVRNklieN6GayOwj7C
 XcRb50z/C0CTvEskLOzWsaC+Rok6doOi5VCgkkZ+6N4CvWQNEqWLfWW5H6wZ7juo
 ME1xx/59GDm/4TYMUXzPI9UygptGGXvH/18n/z47FQpvL5EbAECTVt1nPX1uvn/S
 ZzdSLG8MrbK+IX+62JZqRG5M6TUC2b8ggog2cFfP20JNK0TwU9dMQPtbk2Y+LZRg
 JiUqyRUOuQJFbCgE+b1JuleJHAlsAgqIs7tkY9VfdFYfh+NQcaccWjDjdeB7Hjo=
 =Ooia
 -----END PGP SIGNATURE-----

Merge tag 'v3.6-rc4'

Merge 3.6-rc4 to get latest OMAP and device tree fixes.
2012-09-03 09:26:33 +03:00
Grazvydas Ignotas c1c52848ce OMAPFB: fix framebuffer console colors
omapfb does not currently set pseudo palette correctly for color depths
above 16bpp, making red text invisible, command like
  echo -e '\e[0;31mRED' > /dev/tty1
will display nothing on framebuffer console in 24bpp mode.
This is because temporary variable is declared incorrectly, fix it.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Cc: stable@vger.kernel.org # v3.x
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-08-23 12:37:22 +00:00
Tomi Valkeinen 35d6786648 OMAPDSS: Fix SDI PLL locking
Commit f476ae9dab (OMAPDSS: APPLY: Remove
DISPC writes to manager's lcd parameters in interface) broke the SDI
output, as it causes the SDI PLL locking to fail.

LCLK and PCLK divisors are located in shadow registers, and we normally
write them to DISPC registers when enabling the output.  However, SDI
uses pck-free as source clock for its PLL, and pck-free is affected by
the divisors. And as we need the PLL before enabling the output, we need
to write the divisors early.

It seems just writing to the DISPC register is enough, and we don't need
to care about the shadow register mechanism for pck-free. The exact
reason for this is unknown.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-08-23 12:37:21 +00:00
Chandrabhanu Mahapatra 195e672a76 OMAPDSS: DPI: Remove cpu_is_xxxx checks
The OMAP3 checks have been removed and replaced by a dss feature
FEAT_DPI_USES_VDDS_DSI for cleaner implementation. The patches
"OMAP: DSS2: enable VDDS_DSI when using DPI" (8a2cfea8cc) by Tomi Valkeinen
<tomi.valkeinen@nokia.com> and "ARM: omap: fix oops in
drivers/video/omap2/dss/dpi.c" (4041071571) by Russell King
<rmk+kernel@arm.linux.org.uk> had introduced these checks. As it is evident
from these patches a dependency exists for some DSS pins on VDDS_DSI which is
better shown by dss feature FEAT_DPI_USES_VDDS_DSI.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-08-22 11:43:05 +03:00
Chandrabhanu Mahapatra ee223b7030 OMAPDSS: VENC: Remove cpu_is_xxxx checks
OMAP4 checks are removed from VENC to provide it a cleaner interface. These
checks were introduced by patches "HACK: OMAP: DSS2: VENC: disable VENC on OMAP4
to prevent crash" (ba02fa37de) by Tomi Valkeinen <tomi.valkeinen@ti.com> and
"OMAPDSS: VENC: fix NULL pointer dereference in DSS2 VENC sysfs debug attr on
OMAP4" (cc1d3e032d)  by Danny Kukawka <danny.kukawka@bisect.de> to prevent VENC
from crashing OMAP4 kernel.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-08-22 11:43:04 +03:00
Chandrabhanu Mahapatra 185bae1095 OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
All the cpu_is checks have been moved to dss_init_features function providing a
much more generic and cleaner interface. The OMAP version and revision specific
initializations in various functions are cleaned and the necessary data are
moved to dss_features structure which is local to dss.c.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-08-22 11:43:03 +03:00
Chandrabhanu Mahapatra ba1bc5bb1d OMAPDSS: DSS: Remove redundant functions
Functions dss_calc_clock_rates() and dss_get_clock_div() are removed as these
functions have become redundant and no longer used.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-08-22 11:43:03 +03:00
Chandrabhanu Mahapatra dcbe765b4f OMAPDSS: DISPC: Cleanup cpu_is_xxxx checks
All the cpu_is checks have been moved to dispc_init_features function providing
a much more generic and cleaner interface. The OMAP version and revision
specific functions and data are initialized by dispc_features structure which is
local to dispc.c.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-08-22 11:43:03 +03:00