1/ Replace pcommit with ADR / directed-flushing:
The pcommit instruction, which has not shipped on any product, is
deprecated. Instead, the requirement is that platforms implement either
ADR, or provide one or more flush addresses per nvdimm. ADR
(Asynchronous DRAM Refresh) flushes data in posted write buffers to the
memory controller on a power-fail event. Flush addresses are defined in
ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure:
"Flush Hint Address Structure". A flush hint is an mmio address that
when written and fenced assures that all previous posted writes
targeting a given dimm have been flushed to media.
2/ On-demand ARS (address range scrub):
Linux uses the results of the ACPI ARS commands to track bad blocks
in pmem devices. When latent errors are detected we re-scrub the media
to refresh the bad block list, userspace can also request a re-scrub at
any time.
3/ Support for the Microsoft DSM (device specific method) command format.
4/ Support for EDK2/OVMF virtual disk device memory ranges.
5/ Various fixes and cleanups across the subsystem.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xCBG
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
- Replace pcommit with ADR / directed-flushing.
The pcommit instruction, which has not shipped on any product, is
deprecated. Instead, the requirement is that platforms implement
either ADR, or provide one or more flush addresses per nvdimm.
ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers
to the memory controller on a power-fail event.
Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware
Interface Table (NFIT) sub-structure: "Flush Hint Address Structure".
A flush hint is an mmio address that when written and fenced assures
that all previous posted writes targeting a given dimm have been
flushed to media.
- On-demand ARS (address range scrub).
Linux uses the results of the ACPI ARS commands to track bad blocks
in pmem devices. When latent errors are detected we re-scrub the
media to refresh the bad block list, userspace can also request a
re-scrub at any time.
- Support for the Microsoft DSM (device specific method) command
format.
- Support for EDK2/OVMF virtual disk device memory ranges.
- Various fixes and cleanups across the subsystem.
* tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits)
libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register"
nfit: do an ARS scrub on hitting a latent media error
nfit: move to nfit/ sub-directory
nfit, libnvdimm: allow an ARS scrub to be triggered on demand
libnvdimm: register nvdimm_bus devices with an nd_bus driver
pmem: clarify a debug print in pmem_clear_poison
x86/insn: remove pcommit
Revert "KVM: x86: add pcommit support"
nfit, tools/testing/nvdimm/: unify shutdown paths
libnvdimm: move ->module to struct nvdimm_bus_descriptor
nfit: cleanup acpi_nfit_init calling convention
nfit: fix _FIT evaluation memory leak + use after free
tools/testing/nvdimm: add manufacturing_{date|location} dimm properties
tools/testing/nvdimm: add virtual ramdisk range
acpi, nfit: treat virtual ramdisk SPA as pmem region
pmem: kill __pmem address space
pmem: kill wmb_pmem()
libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes
fs/dax: remove wmb_pmem()
libnvdimm, pmem: flush posted-write queues on shutdown
...
The pcommit instruction is being deprecated in favor of either ADR
(asynchronous DRAM refresh: flush-on-power-fail) at the platform level, or
posted-write-queue flush addresses as defined by the ACPI 6.x NFIT (NVDIMM
Firmware Interface Table).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Previous patches added support for Intel's AVX-512 instructions to the
kernel and perf tools instruction decoders.
AVX-512 instructions are documented in Intel Architecture Instruction
Set Extensions Programming Reference (February 2016).
Add a representative set of instructions to perf's "new instructions"
test. e.g.
perf test "new instructions"
Or to view a particular instruction:
perf test -v "new instructions" 2>&1 | grep vbroadcasti64x4
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: X86 ML <x86@kernel.org>
Link: http://lkml.kernel.org/r/1469003437-32706-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
vcvtph2ps does not have an immediate operand, so remove the erroneous
'Ib' from its opcode map entry. Add vcvtph2ps to the perf tools new
instructions test to verify it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: X86 ML <x86@kernel.org>
Link: http://lkml.kernel.org/r/1469003437-32706-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Another case of a file using definitions and getting them by chance,
from indirect header inclusion, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-o3l1vi4gw2w6xyc6z4ig938s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tools so far have been using the strerror_r() GNU variant, that
returns a string, be it the buffer passed or something else.
But that, besides being tricky in cases where we expect that the
function using strerror_r() returns the error formatted in a provided
buffer (we have to check if it returned something else and copy that
instead), breaks the build on systems not using glibc, like Alpine
Linux, where musl libc is used.
So, introduce yet another wrapper, str_error_r(), that has the GNU
interface, but uses the portable XSI variant of strerror_r(), so that
users rest asured that the provided buffer is used and it is what is
returned.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4t42fnf48ytlk8rjxs822tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because at the destructor we will call close() and that will do the
disable. And we destructors can accept NULL, just like free(), so no
need to check it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-i98mcyfkkjh5qp62dle27ac1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead receive a callchain_param pointer to configure callchain
aspects, not doing so if NULL is passed.
This will allow fine grained control over which evsels in an evlist
gets callchains enabled.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2mupip6khc92mh5x4nw9to82@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit b9511cd761 ("perf/x86: Fix time_shift in perf_event_mmap_page")
altered the time conversion algorithms documented in the perf_event.h
header file, to use 64-bit shifts. That was done to make the code more
future-proof (i.e. some time in the future a 32-bit shift could be
allowed). Reflect those changes in perf tools.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457005856-6143-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The sa_flags field is not being initialized, so a garbage value is being
passed to sigaction. Initialize it to zero.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456923322-29697-1-git-send-email-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The while loop was spinning. Fix by removing a semicolon.
The issue was pointed out by gcc-6's -Wmisleading-indentation.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 035827e9f2 ("perf tests: Add Intel CQM test")
Link: http://lkml.kernel.org/r/20151214154335.GA1409@x4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
$ perf test -v cqm
48: Test intel cqm nmi context read :
--- start ---
test child forked, pid 1681
parse_events failed
test child finished with -2
---- end ----
Test intel cqm nmi context read: Skip
$
After:
$ perf test -v cqm
48: Test intel cqm nmi context read :
--- start ---
test child forked, pid 1681
parse_events failed, is "intel_cqm/llc_occupancy/" available?
test child finished with -2
---- end ----
Test intel cqm nmi context read: Skip
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eidpiv5x4nkbsx37xwikbnir@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were asking for a 4kHz sample_freq, making the test fail needlessly
when the system reduced /proc/sys/kernel/perf_event_max_sample_rate
below that.
In this test we only look at the PERF_SAMPLE_TIME fields in PERF_RECORD_
meta events, no need to set sample_freq.
Thanks to Namhyung for suggesting that max_sample_rate could be the
reason for the test failure, seeing the 'perf test -vv' output I sent.
Before:
# echo 1000 > /proc/sys/kernel/perf_event_max_sample_rate
# perf test TSC
45: Test converting perf time to TSC : FAILED!
After:
# perf test TSC
45: Test converting perf time to TSC : Ok
# cat /proc/sys/kernel/perf_event_max_sample_rate
1000
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lcob05qhawkuvsyuu9g1fld5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some tests have sub-tests we want to run, so allow passing this.
Wang tried to avoid having to touch all tests, but then, having the
test.func in an anonymous union makes the build fail on older compilers,
like the one in RHEL6, where:
test a = {
.func = foo,
};
fails.
To fix it leave the func pointer in the main structure and pass the subtest
index to all tests, end result function is the same, but we have just one
function pointer, not two, with and without the subtest index as an argument.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5genj0ficwdmelpoqlds0u4y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Peter reports that it's possible to trigger a WARN_ON_ONCE() in the
Intel CQM code by combining a hardware event and an Intel CQM
(software) event into a group. Unfortunately, the perf tools are not
able to create this bundle and we need to manually construct a test
case.
For posterity, record Peter's proof of concept test case in tools/perf
so that it presents a model for how we can perform architecture
specific tests, or "arch tests", in perf in the future.
The particular issue triggered in the test case is that when the
counter for the hardware event overflows and triggers a PMI we'll read
both the hardware event and the software event counters.
Unfortunately, for CQM that involves performing an IPI to read the CQM
event counters on all sockets, which in NMI context triggers the
WARN_ON_ONCE().
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/1437490509-15373-1-git-send-email-matt@codeblueprint.co.uk
Link: http://lkml.kernel.org/n/tip-3p4ra0u8vzm7m289a1m799kf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move out the x86-specific tests into tools/perf/arch/x86/tests and
define an 'arch_tests' array, which is the list of tests that only apply
to the build architecture.
We can also now begin to get rid of some of the #ifdef code that is
present in the generic perf tests.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/n/tip-9s68h4ptg06ah0lgnjz55mqn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tests that only make sense for some architectures currently live in
the same place as the generic tests. Move out the x86-specific tests
into tools/perf/arch/x86/tests and define an 'arch_tests' array, which
is the list of tests that only apply to the build architecture.
The main idea is to encourage developers to add arch tests to build
out perf's test coverage, without dumping everything in
tools/perf/tests.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/n/tip-p4uc1c15ssbj8xj7ku5slpa6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the x86 arch objects building under build framework to be included
in the libperf build object.
Adding also arch/$(ARCH)/Build files for the rest of the archs. The
reason for this is that in arch/Build we now do:
+libperf-y += $(ARCH)/
which would make the build to fail on other architectures, because the
build framework requires 'Build' file in nested directories and this
patch adds it only for x86.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5enob06z07m7ew6nzzdmp3n2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving pr_* debug macros to have it with in same object as debug
variables, becase we will change them to use verbose variable in next
patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1405374411-29012-3-git-send-email-jolsa@kernel.org
[ Add missing debug.h include in python scripting glue and in the libdw unwind lib ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
arch/x86/tests/regs_load.S is missing the linker note about the stack
requirements, therefore making the linker fall back to an executable
stack. As this object gets linked against the final perf binary, it'll
needlessly end up with an executable stack. Fix this by adding the
appropriate linker note.
Also add a global linker flag to prevent future regressions, as
suggested by Jiri. This way perf won't get an executable stack even if
we fail to add the .GNU-stack linker note to future assembler files.
Though, doing so might create regressions the other way around, when
(statically) linking against libraries needing an executable stack.
But, apparently, regressing in that direction is wanted as it is an
indicator of poor code quality -- or just missing linker notes.
Fixes: 3c8b06f981 ("perf tests x86: Introduce perf_regs_load function")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398617466-22749-1-git-send-email-minipli@googlemail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Moving towards sharing map groups within a process threads.
Because of this we need the map groups to be dynamically allocated. No
other functional change is intended in here.
Based on a patch by Jiri Olsa, but this time _just_ making the
conversion from statically allocating thread->mg to turning it into a
pointer and instead of initializing it at thread's constructor,
introduce a constructor/destructor for the map_groups class and
call at thread creation time.
Later we will introduce the get/put methods when we move to sharing
those map_groups, when the get/put refcounting semantics will be needed.
Signed-off-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1397490723-1992-3-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding mask info into struct regs_dump to make the registers information
compact.
The mask was always passed along, so logically the mask info fits more
into the struct regs_dump.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-9-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding dwarf unwind test, that setups live machine data over the perf
test thread and does the remote unwind.
At this moment this test fails due to bug in the max_stack processing in
unwind__get_entries function. This is fixed in following patch.
Need to use -fno-optimize-sibling-calls for test compilation, otherwise
'krava_*' function calls are optimized into jumps and ommited from the
stack unwind.
So far it's enabled only for x86.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing perf_regs_load function, which is going to be used for dwarf
unwind test in following patches.
It takes single argument as a pointer to the regs dump buffer and
populates it with current registers values.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds