Commit Graph

1499 Commits

Author SHA1 Message Date
Dale Farnsworth 445857e0fc [POWERPC] Remove dead code at KernelAltiVec
This code isn't referenced anywhere, so remove it.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-26 22:17:03 +11:00
Paul Mackerras f8303dd3db Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/lmb-2.6 2008-02-26 21:08:45 +11:00
Becky Bruce abe768858a [POWERPC] Fix dt_mem_next_cell() to read the full address
dt_mem_next_cell() currently does of_read_ulong().  This does not
allow for the case where #size-cells and/or #address-cells = 2 on a
32-bit system, as it will end up reading 32 bits instead of the
expected 64.  Change it to use of_read_number instead and always
return a u64.

Signed-off-by: Becky Bruce <becky.bruce at freescale.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-20 13:33:37 +11:00
Ananth N Mavinakayanahalli 66200ea222 [POWERPC] Kill sparse warnings in kprobes
Fix sparse warnings in powerpc kprobes:

  CHECK   arch/powerpc/kernel/kprobes.c
arch/powerpc/kernel/kprobes.c:277:6: warning: symbol 'kretprobe_trampoline_holder' was not declared. Should it be static?
arch/powerpc/kernel/kprobes.c:287:15: warning: symbol 'trampoline_probe_handler' was not declared. Should it be static?
arch/powerpc/kernel/kprobes.c:525:16: warning: symbol 'jprobe_return_end' was not declared. Should it be static?

Fix along the same lines as http://lkml.org/lkml/2008/2/13/642

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-20 13:33:37 +11:00
Adrian Bunk cf8918fe55 [POWERPC] vdso_do_func_patch{32,64}() must be __init
This fixes the following section mismatches:

<--  snip  -->

...
WARNING: vmlinux.o(.text+0xe49c): Section mismatch in reference from the function .vdso_do_func_patch64() to the function .init.text:.find_symbol64()
WARNING: vmlinux.o(.text+0xe4d0): Section mismatch in reference from the function .vdso_do_func_patch64() to the function .init.text:.find_symbol64()
WARNING: vmlinux.o(.text+0xe56c): Section mismatch in reference from the function .vdso_do_func_patch32() to the function .init.text:.find_symbol32()
WARNING: vmlinux.o(.text+0xe5a0): Section mismatch in reference from the function .vdso_do_func_patch32() to the function .init.text:.find_symbol32()
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-14 22:11:02 +11:00
Kumar Gala e4ccde0262 [POWERPC] Remove generated files on make clean
vmlinux.lds and dtc-parser.tab.h get created but never cleaned up.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-14 22:11:02 +11:00
Hugh Dickins 79ccd1bedc [POWERPC] Fix DEBUG_PREEMPT warning when warning
The powerpc show_regs prints CPU using smp_processor_id: change that to
raw_smp_processor_id, so that when it's showing a WARN_ON backtrace without
preemption disabled, DEBUG_PREEMPT doesn't mess up that warning with its own.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-14 22:11:00 +11:00
David S. Miller d9b2b2a277 [LIB]: Make PowerPC LMB code generic so sparc64 can use it too.
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-13 16:56:49 -08:00
Tony Breeds 151db1fc23 Fix compilation of powerpc asm-offsets.c with old gcc
Commit ad7f71674a ("[POWERPC] Use a
sensible default for clock_getres() in the VDSO") corrected the clock
resolution reported by the VDSO clock_getres() but introduced another
problem in that older versions of gcc (gcc-4.0 and earlier) fail to
compile the new code in arch/powerpc/kernel/asm-offsets.c.

This fixes it by introducing a new MONOTONIC_RES_NSEC define in the
generic code which is equivalent to KTIME_MONOTONIC_RES but is just an
integer constant, not a ktime union.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 14:54:45 -08:00
Linus Torvalds 3796958130 Merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (69 commits)
  [POWERPC] Add SPE registers to core dumps
  [POWERPC] Use regset code for compat PTRACE_*REGS* calls
  [POWERPC] Use generic compat_sys_ptrace
  [POWERPC] Use generic compat_ptrace_request
  [POWERPC] Use generic ptrace peekdata/pokedata
  [POWERPC] Use regset code for PTRACE_*REGS* requests
  [POWERPC] Switch to generic compat_binfmt_elf code
  [POWERPC] Switch to using user_regset-based core dumps
  [POWERPC] Add user_regset compat support
  [POWERPC] Add user_regset_view definitions
  [POWERPC] Use user_regset accessors for GPRs
  [POWERPC] ptrace accessors for special regs MSR and TRAP
  [POWERPC] Use user_regset accessors for SPE regs
  [POWERPC] Use user_regset accessors for altivec regs
  [POWERPC] Use user_regset accessors for FP regs
  [POWERPC] mpc52xx: fix compile error introduce when rebasing patch
  [POWERPC] 4xx: PCIe indirect DCR spinlock fix.
  [POWERPC] Add missing native dcr dcr_ind_lock spinlock
  [POWERPC] 4xx: Fix offset value on Warp board
  [POWERPC] 4xx: Add 440EPx Sequoia ehci dts entry
  ...
2008-02-07 09:02:26 -08:00
Roland McGrath 24f1a84961 [POWERPC] Add SPE registers to core dumps
This makes the SPE register data appear in ELF core dumps, using the
new n_type value NT_PPC_SPE (0x101).  This new note type is not used
by any consumers of core files yet, but support can be added.  I don't
even have any hardware with SPE capabilities, so I've never seen such
a note.  But this demonstrates how simple it is to export register
information in core dumps when the user_regset style is used for the
low-level code.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 20:40:23 +11:00
Roland McGrath 0deef2c7ab [POWERPC] Use regset code for compat PTRACE_*REGS* calls
This cleans up the 32-bit ptrace syscall support to use user_regset calls
to get at the register data for PTRACE_*REGS* calls.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 20:40:21 +11:00
Roland McGrath 81e695c026 [POWERPC] Use generic compat_sys_ptrace
This replaces powerpc's compat_sys_ptrace with a compat_arch_ptrace and
enables the new generic definition of compat_sys_ptrace instead.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 20:40:21 +11:00
Roland McGrath 1d48d71c06 [POWERPC] Use generic compat_ptrace_request
This removes some duplicated code by calling the new generic
compat_ptrace_request from powerpc's compat_sys_ptrace.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 20:40:20 +11:00
Roland McGrath c034243504 [POWERPC] Use generic ptrace peekdata/pokedata
Now that ptrace_request handles these, we can drop some more boilerplate.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 20:40:19 +11:00
Roland McGrath c391cd0093 [POWERPC] Use regset code for PTRACE_*REGS* requests
This replaces all the code for powerpc PTRACE_*REGS* requests with
simple calls to copy_regset_from_user and copy_regset_to_user.  All
the ptrace formats are either the whole corresponding user_regset
format (core dump format) or a leading subset of it, so we can get
rid of all the remaining embedded knowledge of both those layouts
and of the internal data structures they correspond to.  Only the
user_regset accessors need to implement that.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 20:40:18 +11:00
Roland McGrath 01e31dbabc [POWERPC] Switch to generic compat_binfmt_elf code
This switches the CONFIG_PPC64 support for 32-bit ELF to use the
generic fs/compat_binfmt_elf.c implementation instead of our own
binfmt_elf32.c.  Since so much is the same between 32/64, there is
only one macro we have to define to make the generic support work out
of the box.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 20:40:18 +11:00
Roland McGrath fa8f5cb0c9 [POWERPC] Add user_regset compat support
This extends task_user_regset_view CONFIG_PPC64 with support for the
32-bit view of register state, compatible with what a CONFIG_PPC32
kernel provides.  This will enable generic machine-independent code to
access user-mode threads' registers for debugging and dumping.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 20:40:16 +11:00
Roland McGrath 80fdf47094 [POWERPC] Add user_regset_view definitions
This provides the task_user_regset_view entry point and support for
all the native-mode (64 on CONFIG_PPC64, 32 on CONFIG_PPC32) thread
register state.  This will enable generic machine-independent code to
access user-mode threads' registers for debugging and dumping.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 20:40:16 +11:00
Roland McGrath 44dd3f50d3 [POWERPC] Use user_regset accessors for GPRs
This implements user_regset-style accessors for the powerpc general
registers.  In the future these functions will be the only place that
needs to understand the user_regset layout (core dump format) and how
it maps to the internal representation of user thread state.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 20:38:57 +11:00
Roland McGrath 26f7713020 [POWERPC] ptrace accessors for special regs MSR and TRAP
This isolates the ptrace code for the special-case registers msr and trap
from the ptrace-layout dispatch code.  This should inline away completely.
It cleanly separates the low-level machine magic that has to be done for
deep reasons, from the superficial details of the ptrace interface.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 20:38:56 +11:00
Roland McGrath a4e4b175b6 [POWERPC] Use user_regset accessors for SPE regs
This implements user_regset-style accessors for the powerpc SPE data,
and rewrites the existing ptrace code in terms of those calls.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 20:38:56 +11:00
Roland McGrath 3caf06c6e0 [POWERPC] Use user_regset accessors for altivec regs
This implements user_regset-style accessors for the powerpc Altivec data,
and rewrites the existing ptrace code in terms of those calls.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 20:38:56 +11:00
Roland McGrath f65255e8d5 [POWERPC] Use user_regset accessors for FP regs
This implements user_regset-style accessors for the powerpc FPU data,
and rewrites the existing ptrace code in terms of those calls.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 20:38:56 +11:00
Olof Johansson 7dbb922cea [POWERPC] Fix compilation for CONFIG_DEBUGGER=n and CONFIG_KEXEC=y
Looks like "[POWERPC] kdump shutdown hook support" broke builds when
CONFIG_DEBUGGER=n and CONFIG_KEXEC=y, such as in g5_defconfig:

arch/powerpc/kernel/crash.c: In function 'default_machine_crash_shutdown':
arch/powerpc/kernel/crash.c:388: error: '__debugger_fault_handler' undeclared (first use in this function)
arch/powerpc/kernel/crash.c:388: error: (Each undeclared identifier is reported only once
arch/powerpc/kernel/crash.c:388: error: for each function it appears in.)

Move the debugger hooks to under CONFIG_DEBUGGER || CONFIG_KEXEC, since
that's when the crash code is enabled.

(I should have caught this with my build-script pre-merge, my bad. :( )

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 11:40:18 +11:00
Michael Neuling 06b8e878a9 taskstats scaled time cleanup
This moves the ability to scale cputime into generic code.  This allows us
to fix the issue in kernel/timer.c (noticed by Balbir) where we could only
add an unscaled value to the scaled utime/stime.

This adds a cputime_to_scaled function.  As before, the POWERPC version
does the scaling based on the last SPURR/PURR ratio calculated.  The
generic and s390 (only other arch to implement asm/cputime.h) versions are
both NOPs.

Also moves the SPURR and PURR snapshots closer.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: Jay Lan <jlan@engr.sgi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:00 -08:00
Paul Mackerras b370b08274 Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25 2008-02-06 22:08:37 +11:00
Andy Fleming 1347a2c1eb [POWERPC} Add oprofile support for e300
The e300 c3 and c4 variants support hardware performance monitor counters
which are identical to those found in the e500.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05 23:37:58 -06:00
Andy Fleming 39aef685af [POWERPC] Made FSL Book-E PMC support more generic
Some of the more recent e300 cores have the same performance monitor
implementation as the e500.  e300 isn't book-e, so the name isn't
really appropriate.  In preparation for e300 support, rename a bunch
of fsl_booke things to say fsl_emb (Freescale Embedded Performance Monitors).

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05 23:34:14 -06:00
Michael Ellerman f5903ede00 [POWERPC] Fix legacy serial search for opb bus ports
The patch to legacy_serial.c (1a7507c7da,
Reduce code duplication in legacy_serial, add UART parent types) changed
the semantics for opb ports from type = "opb" || compatible = "ibm,opb"
to type = "opb" && compatible = "ibm,opb".

The result is serial ports on our QS21s (Cell blades) don't get found,
and for some reason the machine doesn't boot at all - possibly it's
panicking due to lack of a console?

The fix is to add two entries to the of_device_id table, one that looks
for type = "opb" and the other compatible = "ibm,opb".

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06 16:30:00 +11:00
Tony Breeds ad7f71674a [POWERPC] Use a sensible default for clock_getres() in the VDSO
This ensures that the syscall and the (fast) vdso versions of
clock_getres() will return the same resolution.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06 16:30:00 +11:00
Stephen Rothwell de7d812d05 [POWERPC] iSeries: Fix section mismatch in viodsasd
WARNING: vmlinux.o(.text+0x3017c): Section mismatch in reference from the function .vio_create_viodasd() to the function .devinit.text:.vio_register_device_node()

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06 16:30:00 +11:00
FUJITA Tomonori 383af9525b iommu sg: powerpc: remove DMA 4GB boundary protection
Previously, during initialization of the IOMMU tables, the last entry
at each 4GB boundary is marked as used since there are many adapters
which cannot handle DMAing across any 4GB boundary.

The IOMMU doesn't allocate a memory area spanning LLD's segment
boundary anymore. The segment boundary of devices are set to 4GB by
default. So we can remove 4GB boundary protection now.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:11 -08:00
FUJITA Tomonori fb3475e9b6 iommu sg: powerpc: convert iommu to use the IOMMU helper
This patch converts PPC's IOMMU to use the IOMMU helper functions.  The IOMMU
doesn't allocate a memory area spanning LLD's segment boundary anymore.

iseries_hv_alloc and iseries_hv_map don't have proper device
struct. 4GB boundary is used for them.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:11 -08:00
FUJITA Tomonori 740c3ce667 iommu sg merging: ppc: make iommu respect the segment size limits
This patch makes iommu respect segment size limits when merging sg
lists.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:10 -08:00
Paul Mackerras bd45ac0c5d Merge branch 'linux-2.6' 2008-01-31 11:25:51 +11:00
Paul Mackerras 4eece4ccf9 Merge branch 'for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-mpc52xx 2008-01-31 10:50:17 +11:00
Linus Torvalds 3b470ac43f Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  PPC: Fix powerpc vio_find_name to not use devices_subsys
  Driver core: add bus_find_device_by_name function
  Module: check to see if we have a built in module with the same name
  x86: fix runtime error in arch/x86/kernel/cpu/mcheck/mce_amd_64.c
  Driver core: Fix up build when CONFIG_BLOCK=N
2008-01-31 09:31:37 +11:00
Roland McGrath d6f4fb7558 powerpc: ptrace generic resume
This removes the handling for PTRACE_CONT et al from the powerpc
ptrace code, so it uses the new generic code via ptrace_request.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:51 +01:00
Roland McGrath 2a84b0d719 powerpc: arch_has_single_step
This defines the new standard arch_has_single_step macro.  It makes the
existing set_single_step and clear_single_step entry points global, and
renames them to the new standard names user_enable_single_step and
user_disable_single_step, respectively.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:51 +01:00
Adrian Bunk 3ff6eecca4 remove __attribute_used__
Remove the deprecated __attribute_used__.

[Introduce __section in a few places to silence checkpatch /sam]

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Sam Ravnborg 01ba2bdc6b all archs: consolidate init and exit sections in vmlinux.lds.h
This patch consolidate all definitions of .init.text, .init.data
and .exit.text, .exit.data section definitions in
the generic vmlinux.lds.h.

This is a preparational patch - alone it does not buy
us much good.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:17 +01:00
Kumar Gala a6f7174596 [POWERPC] 85xx: Only invalidate TLB0 and TLB1
All current 85xx/e500 implementations only have two TLB
arrays.  We are wasting cycles by invalidating TLB2 and TLB3.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 13:23:42 -06:00
Paul Gortmaker 1a7507c7da [POWERPC] Reduce code duplication in legacy_serial, add UART parent types
The legacy_serial was treating each UART parent in a separate code block.
Rather than continue this trend for the new parent IDs, this condenses
all (soc, tsi, opb, plus two more new types) into one of_device_id array.
The new types are wrs,epld-localbus for the Wind River sbc8560, and a
more generic "simple-bus" as requested by Scott Wood.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:30:45 -06:00
Paul Mackerras c847c853a5 PPC: Fix powerpc vio_find_name to not use devices_subsys
This fixes vio_find_name() in arch/powerpc/kernel/vio.c, which is
currently broken because it tries to use devices_subsys.  That is bad
for two reasons: (1) it's doing (or trying to do) a scan of all
devices when it should only be scanning those on the vio bus, and
(2) devices_subsys was an internal symbol of the device system code
which was never meant for external use and has now gone away, and
thus the kernel fails to compile on pSeries.

The new version uses bus_find_device_by_name() on the vio bus
(vio_bus_type).

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-27 15:01:39 -08:00
Grant Likely 94d2dde738 [POWERPC] Efika: prune fixups and make them more carefull
Prune back Efika fixups to only include changes that are actually required
to get a working system.  Most of the drivers can accept the compatible
properties, even if they don't match the what is recommented in the generic
names recommended practice document.

This patch also adds extra checks so that fixups are not performed blindly.
Instead, the code first verifies that the device tree is faulty before
making any changes.  This way, if the Efika firmware is updated to fix
these issues, then the fixups will no longer get applied.

At this point; here is the list of fixups needed for the efika:
1. If the device_type property on the root node is 'chrp', then Linux won't
   boot.  Change device_type to 'efika' to avoid this condition
2. Add full interrupt list to the bestcomm node.  In actual fact, the
   bestcomm interrupts property is technically correct, it just doesn't
   expose the same granularity as the device driver expects.  All other
   5200 device trees provide a separate irq number for each bestcomm
   channel.  Rather than hack the driver, it's simpler to fix it up
3. /builtin/sound node is missing an interrupts property
4. /builtin/ethernet node is missing a phy-handle property and the
   device driver doesn't know what to do without one.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-26 15:32:18 -07:00
Paul Mackerras 75e06e2d7d Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx 2008-01-26 15:30:35 +11:00
Sean MacLennan 3f8fc3e0c7 [POWERPC] 4xx: Add PowerPC 440EP Rev C
This adds the 440EP revision C PVR to the CPU table.  The chip has an
FPU on it, so we also match the logical PVR

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25 07:08:27 -06:00
Stefan Roese b676d84e72 [POWERPC] 4xx: Add 405EXr to cputable
This patch adds the 405EXr to the powerpc cuptable. Basically the 405EXr
is a 405EX with only one EMAC and only one PCIe interface.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25 07:06:09 -06:00
Michael Ellerman bd83fbde5b [POWERPC] Remove bogus comment in dma_direct_alloc_coherent()
Since commit c80d9133e9 (Make direct DMA use
node local allocations) went in this comment makes no sense.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25 22:52:54 +11:00
Michael Ellerman 31d1b49323 [POWERPC] Remove the global dma_direct_offset
We no longer need the global dma_direct_offset, update the comment to
reflect the new reality.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25 22:52:54 +11:00
Michael Ellerman 35e4a6e26d [POWERPC] Use archdata.dma_data in dma_direct_ops and add the offset
Now that all platforms using dma_direct_offset setup the
archdata.dma_data correctly, we can change the dma_direct_ops to
retrieve the offset from the dma_data, rather than directly from the
global.

While we're here, change the way the offset is used - instead of
or'ing it into the value, add it.  This should have no effect on
current implementations where the offset is far larger than memory,
however in future we may want to use smaller offsets.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25 22:52:54 +11:00
Benjamin Herrenschmidt 9d5f49283b [POWERPC] Always hookup PHB IO resource even when empty
We must always hookup the pci_bus resource 0 to the PHB io_resource
even if the latter is empty (the bus has no IO support).  Otherwise,
some other code will end up hooking it up to something bogus and the
resource tree will end up being broken.

This fixes boot on QS20 Cell blades where the IDE driver failed to
allocate the IO resources due to breakage of the resource tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25 22:52:53 +11:00
Michael Neuling 496b010e1e [POWERPC] kdump shutdown hook support
This adds hooks into the default_machine_crash_shutdown so drivers can
register a function to be run in the first kernel before we hand off
to the second kernel.  This should only be used in exceptional
circumstances, like where the device can't be reset in the second
kernel alone (as is the case with eHEA).  To emphasize this, the
number of handles allowed to be registered is currently #def to 1.

This uses the setjmp/longjmp code around the call out to the
registered hooks, so any bogus exceptions we encounter will hopefully
be recoverable.

Tested with bogus data and instruction exceptions.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25 22:52:50 +11:00
Michael Neuling c3b75bd7bb [POWERPC] Make setjmp/longjmp code usable outside of xmon
This makes the setjmp/longjmp code used by xmon, generically available
to other code.  It also removes the requirement for debugger hooks to
be only called on 0x300 (data storage) exception.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25 22:52:50 +11:00
Stephen Rothwell caa34c9e9c [POWERPC] Fix a couple of copyright symbols
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25 22:52:50 +11:00
Stephen Rothwell 745c2ef2e7 [POWERPC] Make ibmebus use of_(un)register_driver
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25 22:52:50 +11:00
Joseph Fannin ab1f89b388 [POWERPC] Export copy_page() on 32bit
Export copy_page() on 32-bit powerpc; unionfs needs it.

Unionfs already builds as a module on 64bit powerpc, so the export is
placed within an existing CONFIG_PPC32 #ifdef.

Signed-off-by: Joseph Fannin <jfannin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25 22:52:50 +11:00
Olof Johansson e057d985fd [POWERPC] Make smp_send_stop() handle panic and xmon reboot
smp_send_stop() will send an IPI to all other cpus to shut them down.
However, for the case of xmon-based reboots (as well as potentially some
panics), the other cpus are (or might be) spinning with interrupts off,
and won't take the IPI.

Current code will drop us into the debugger when the IPI fails, which
means we're in an infinite loop that we can't get out of without an
external reset of some sort.

Instead, make the smp_send_stop() IPI call path just print the warning
about being unable to send IPIs, but make it return so the rest of the
shutdown sequence can continue. It's not perfect, but the lesser of
two evils.

Also move the call_lock handling outside of smp_call_function_map so we
can avoid deadlocks in smp_send_stop().

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25 22:52:50 +11:00
Olof Johansson b616de5ef9 [POWERPC] Make smp_call_function_map static
smp_call_function_map should be static, and for consistency prepend it
with __ like other local helper functions in the same file.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25 22:52:49 +11:00
Paul Mackerras dcb571be20 Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25 2008-01-24 15:29:14 +11:00
Kumar Gala de3c8d4182 [POWERPC] Move RapidIO support code from arch/ppc
Do just enough to move the RapidIO support code for 85xx over from arch/ppc
into arch/powerpc and make it still build.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:35:15 -06:00
Dale Farnsworth e8b6376155 [POWERPC] 85xx: Respect KERNELBASE, PAGE_OFFSET, and PHYSICAL_START on e500
The e500 MMU init code previously assumed KERNELBASE always equaled
PAGE_OFFSET and PHYSICAL_START was 0.  This is useful for kdump
support as well as asymetric multicore.

For the initial kdump support the secondary kernel will run at 32M
but need access to all of memory so we bump the initial TLB up to
64M.  This also matches with the forth coming ePAPR spec.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:34:36 -06:00
Kumar Gala 82f0183ef3 [POWERPC] Remove update_bridge_resource
The 85xx/86xx pci code no longer uses update_bridge_resource and it was the
only caller.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:32:30 -06:00
Kumar Gala b188b2aefe [POWERPC] Fixup transparent P2P resources
For transparent P2P bridges the first 3 resources may get set from based on
BAR registers and need to get fixed up. Where as the remainder come from the
parent bus and have already been fixed up.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:30:33 -06:00
Kumar Gala 96d69c31c5 [POWERPC] Ensure we only handle PowerMac PCI bus fixup for memory resources
The fixup code that handles the case for PowerMac's that leave bridge
windows open over an inaccessible region should only be applied to
memory resources (IORESOURCE_MEM).  If not we can get it trying to fixup
IORESOURCE_IO on some systems since the other conditions that are used to
detect the case can easily match for IORESOURCE_IO.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:30:28 -06:00
Paul Mackerras 9156ad4833 Merge branch 'linux-2.6' 2008-01-24 10:07:21 +11:00
Paul Mackerras fa28237cfc [POWERPC] Provide a way to protect 4k subpages when using 64k pages
Using 64k pages on 64-bit PowerPC systems makes life difficult for
emulators that are trying to emulate an ISA, such as x86, which use a
smaller page size, since the emulator can no longer use the MMU and
the normal system calls for controlling page protections.  Of course,
the emulator can emulate the MMU by checking and possibly remapping
the address for each memory access in software, but that is pretty
slow.

This provides a facility for such programs to control the access
permissions on individual 4k sub-pages of 64k pages.  The idea is
that the emulator supplies an array of protection masks to apply to a
specified range of virtual addresses.  These masks are applied at the
level where hardware PTEs are inserted into the hardware page table
based on the Linux PTEs, so the Linux PTEs are not affected.  Note
that this new mechanism does not allow any access that would otherwise
be prohibited; it can only prohibit accesses that would otherwise be
allowed.  This new facility is only available on 64-bit PowerPC and
only when the kernel is configured for 64k pages.

The masks are supplied using a new subpage_prot system call, which
takes a starting virtual address and length, and a pointer to an array
of protection masks in memory.  The array has a 32-bit word per 64k
page to be protected; each 32-bit word consists of 16 2-bit fields,
for which 0 allows any access (that is otherwise allowed), 1 prevents
write accesses, and 2 or 3 prevent any access.

Implicit in this is that the regions of the address space that are
protected are switched to use 4k hardware pages rather than 64k
hardware pages (on machines with hardware 64k page support).  In fact
the whole process is switched to use 4k hardware pages when the
subpage_prot system call is used, but this could be improved in future
to switch only the affected segments.

The subpage protection bits are stored in a 3 level tree akin to the
page table tree.  The top level of this tree is stored in a structure
that is appended to the top level of the page table tree, i.e., the
pgd array.  Since it will often only be 32-bit addresses (below 4GB)
that are protected, the pointers to the first four bottom level pages
are also stored in this structure (each bottom level page contains the
protection bits for 1GB of address space), so the protection bits for
addresses below 4GB can be accessed with one fewer loads than those
for higher addresses.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-24 10:06:01 +11:00
Jon Loeliger 0173d422aa [POWERPC] Use <linux/of_{platform, device}.h> and not <asm/...> variants.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17 14:58:57 +11:00
Stephen Rothwell 0a4690cf75 [POWERPC] Check that the syscall table matches the syscall numbers
Also check that __NR_syscalls has been updated appropriately.

Hopefully this will catch any out of order additions to the
table in the future.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17 14:57:38 +11:00
Stephen Rothwell 85e99b9fff [POWERPC] arch/powerpc/kernel: Use for_each_child_of_node
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17 14:57:20 +11:00
Stephen Rothwell 66524b220a [POWERPC] pci_32.c: Use for_each_child_of_node
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17 14:57:08 +11:00
Stephen Rothwell 885b86e4e7 [POWERPC] iSeries: eliminate pci_dn bussubno
xlate_iomm_address() really wants the ds_addr to pass to the HV, so store
that value (instead of the BAR number) when we allocate the device bars.
This is not a fast path, so we can look up the device_node property
there instead of using the bussubno field of the pci_dn.

The other user of iseries_ds_addr() was already scanning the device tree,
so looking up a property will not slow it down any more.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17 14:57:05 +11:00
Cyrill Gorcunov 3329c0d1b2 [POWERPC] Use for_each macros in arch/powerpc/kernel
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17 14:56:55 +11:00
Grant Likely 283029d16a [POWERPC] Add of_find_matching_node() helper function
Similar to of_find_compatible_node(), of_find_matching_node() and
for_each_matching_node() allow you to iterate over the device tree
looking for specific nodes, except that they take of_device_id
tables instead of strings.

This also moves of_match_node() from driver/of/device.c to
driver/of/base.c to colocate it with the of_find_matching_node which
depends on it.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17 14:53:22 +11:00
Benjamin Herrenschmidt d262c32a4b [POWERPC] Workaround for iommu page alignment
Commit 5d2efba64b changed our iommu code
so that it always uses an iommu page size of 4kB.  That means with our
current code, drivers may do a dma_map_sg() of a 64kB page and obtain
a dma_addr_t that is only 4k aligned.

This works fine in most cases except for some infiniband HW it seems,
where they tell the HW about the page size and it ignores the low bits
of the DMA address.

This works around it by making our IOMMU code enforce a PAGE_SIZE alignment
for mappings of objects that are page aligned in the first place and whose
size is larger or equal to a page.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-15 15:39:59 +11:00
Olaf Hering 6f4347c969 [POWERPC] efika: add phy-handle property for fec_mpc52xx
The new network driver fec_mpc52xx will not work on efika because the
firmware does not provide all required properties.
http://www.powerdeveloper.org/asset/by-id/46 has a Forth script to
create more properties. But only the phy stuff is required to get a
working network.

This should go into the kernel because its appearently
impossible to boot the script via tftp and then load the real boot
binary (yaboot or zimage).

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-01-10 08:12:59 -07:00
Paul Mackerras 533b1928b5 Revert "[POWERPC] Disable PCI IO/Mem on a device when resources can't be allocated"
This reverts commit 553aa7659b at Ben H's
request, because it confused IORESOURCE_* flags with command register
bits.

Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-31 10:12:45 +11:00
Josh Boyer e3e414bcc2 [POWERPC] Conditionally compile e200 and e500 platforms in cputable
The e200 and e500 platforms are separated in various parts of the kernel with
ifdefs, most notably reg_booke.h and traps.c.  The new machine_check rework
requires them to be similarly separated in cputable.c to avoid compile errors.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-24 08:44:47 -06:00
Valentine Barshak 14b3d926a2 [POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaround
Renaming the CPU nodes with generic names put the CPU model in
the "model" property and thus broke the PowerPC 440EP(x)/440GR(x)
identical PVR workaround. The updates it to use the new model property
for CPU identification.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:35:58 -06:00
Josh Boyer 9ac30c3145 [POWERPC] 4xx: Fix 440grx setup function to call 440A fixup
The mechanism to do the setup for 440A cores changed recently.  This fixes
the 440grx setup function to call __fixup_440A_mcheck.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:27:37 -06:00
Valentine Barshak b2be3b1529 [POWERPC] 4xx: Correct 440GRx machine_check callback
Correct the PowerPC 440GRx machine check callback.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:26:10 -06:00
Benjamin Herrenschmidt 9dae8afdf2 [POWERPC] 4xx: Add early udbg support for 40x processors
This adds some basic real mode based early udbg support for 40x
in order to debug things more easily

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:13:03 -06:00
Benjamin Herrenschmidt 47c0bd1ae2 [POWERPC] Reworking machine check handling and Fix 440/440A
This adds a cputable function pointer for the CPU-side machine
check handling. The semantic is still the same as the old one,
the one in ppc_md. overrides the one in cputable, though
ultimately we'll want to change that so the CPU gets first.

This removes CONFIG_440A which was a problem for multiplatform
kernels and instead fixes up the IVOR at runtime from a setup_cpu
function. The "A" version of the machine check also tweaks the
regs->trap value to differenciate the 2 versions at the C level.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:11:59 -06:00
Paul Mackerras c2a7dcad9f Merge branch 'linux-2.6' 2007-12-21 22:21:08 +11:00
Stephen Rothwell b91bdd1517 [POWERPC] Constify the of_device_id passed to of_platform_bus_probe
This will allow us to declare const all the statically declared arrrays
of these.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-21 22:14:07 +11:00
Stephen Rothwell 92d1616ec0 [POWERPC] The builtin matches for ibmebus.c can be __initdata
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-21 22:14:07 +11:00
Benjamin Herrenschmidt b1b166b7ea [POWERPC] Fix possible NULL deref in ppc32 PCI
The 32-bit PCI code tests if "bus" is non-NULL after calling
pci_scan_bus_parented() in one place but not another before
dereferencing it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-21 22:14:07 +11:00
Scott Wood 7ac5dde99e [POWERPC] Implement arch disable/enable irq hooks.
These hooks ensure that a decrementer interrupt is not pending when
suspending; otherwise, problems may occur on 6xx/7xx/7xxx-based
systems (except for powermacs, which use a separate suspend path).
For example, with deep sleep on the 831x, a pending decrementer will
cause a system freeze because the SoC thinks the decrementer interrupt
would have woken the system, but the core must have interrupts
disabled due to the setup required for deep sleep.

Changed via-pmu.c to use the new ppc_md hooks, and made the arch_*
functions call the generic_* functions unconditionally.  -- paulus

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-21 22:13:35 +11:00
Emil Medve eda09fbdcd [POWERPC] Optimize counting distinct entries in the relocation sections
When a module has relocation sections with tens of thousands of
entries, counting the distinct/unique entries only (i.e. no
duplicates) at load time can take tens of seconds and up to minutes.
The sore point is the count_relocs() function which is called as part
of the architecture specific module loading processing path:

	-> load_module()			generic
	   -> module_frob_arch_sections()	arch specific
	      -> get_plt_size()		32-bit
	      -> get_stubs_size()	64-bit
		 -> count_relocs()

Here count_relocs is being called to find out how many distinct
targets of R_PPC_REL24 relocations there are, since each distinct
target needs a PLT entry or a stub created for it.

The previous counting algorithm has O(n^2) complexity.  Basically two
solutions were proposed on the e-mail list: a hash based approach and
a sort based approach.

The hash based approach is the fastest (O(n)) but the has it needs
additional memory and for certain corner cases it could take lots of
memory due to the degeneration of the hash.  One such proposal was
submitted here:

http://ozlabs.org/pipermail/linuxppc-dev/2007-June/037641.html

The sort based approach is slower (O(n * log n + n)) but if the
sorting is done "in place" it doesn't need additional memory.
This has O(n + n * log n) complexity with no additional memory
requirements.

This commit implements the in-place sort option.

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-21 15:05:58 +11:00
Lucas Woods 05ead01554 [POWERPC] arch/powerpc: Remove duplicate includes
Signed-off-by: Lucas Woods <woodzy@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 17:13:50 +11:00
Stephen Rothwell 08a644ecef [POWERPC] Stop the TOC overflowing for large builds
We were using -mno-minimal-toc on everything in arch/powerpc/kernel,
which means that all the functions in there were putting all their
TOC entries in the top-level TOC, and it was overflowing on an
allyesconfig build.  For various reasons, prom_init.c does need
-mno-minimal-toc, but the other .c files in there can use sub-TOCs
quite happily.  This change is sufficient for now to stop the TOC
overflowing; other directories under arch/powerpc also use
-mno-minimal-toc and could also be changed later if necessary.

Lmbench runs with and without this patch showed no significant speed
differences.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 17:13:34 +11:00
Benjamin Herrenschmidt 54a24cbbd0 [POWERPC] Fix PCI IRQ fallback code to not map IRQ 0
The PCI IRQ code has a fallback when the device-tree parsing fails, that
tries to map the interrupt indicated by PCI_INTERRUPT_LINE if the firmware
set something in there. This is a bit fragile but has proven useful in some
cases so far. However, it's causing us to incorrectly try to map interrupt 0
on various setups, so let's prevent that case, as none of the cases where
the fallback is legit should have an IRQ 0.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:17 +11:00
Benjamin Herrenschmidt 553aa7659b [POWERPC] Disable PCI IO/Mem on a device when resources can't be allocated
This patch changes the PowerPC PCI code to disable IO and/or Memory
decoding on a PCI device when a resource of that type failed to be
allocated.  This is done to avoid having unallocated dangling BARs
enabled that might try to decode on top of other devices.

If a proper resource is assigned later on, then pci_enable_device()
will take care of re-enabling decoding.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:16 +11:00
Benjamin Herrenschmidt be8cbcd889 [POWERPC] Fixup skipping of PowerMac PCI<->PCI bridge "closed" resources
Apple firmware has a strange way to "close" bridge resources by setting
them to some bogus values that overlap RAM (strangely, I haven't seen it
conflicting with DMA so far...).  This explicitely closes them to avoid
problems.  Previously, they would be closed as a consequence of failing
to be allocated, but this makes it more explicit, and thus the log
message is more explicit too.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:15 +11:00
Benjamin Herrenschmidt bcf988a194 [POWERPC] Various fixes to pcibios_enable_device()
Our implementation of pcibios_enable_device() has a couple of problems.

One is that it should not check IORESOURCE_UNSET, as this might be
left dangling after resource assignment (shouldn't but there are
bugs), but instead, we make it check resource->parent which should
be a reliable indication that the resource has been successfully
claimed (it's in the resource tree).

Then, we also need to skip ROM resources that haven't been enabled
as x86 does.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:13 +11:00
Benjamin Herrenschmidt 549beb9ba3 [POWERPC] Merge 32 and 64 bits pcibios_enable_device
This merge the two implementations, based on the previously
fixed up 32 bits one.  The pcibios_enable_device_hook in ppc_md
is now available for ppc64 use.  Also remove the new unused
"initial" parameter from it and fixup users.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:11 +11:00
Benjamin Herrenschmidt 24f8c827f9 [POWERPC] Updates/fixes to 32 bits pcibios_enable_device()
Our implementation of pcibios_enable_device() incorrectly ignores
the mask argument and always checks that all resources have been
allocated, which isn't the right thing to do anymore.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:10 +11:00
Benjamin Herrenschmidt 50c9bc2fc8 [POWERPC] fix iSeries PCI resource management
The way iSeries manages PCI IO and Memory resources is a bit strange
and is based on overriding the content of those resources with home
cooked ones afterward.

This changes it a bit to better integrate with the new resource handling
so that the "virtual" tokens that iSeries replaces resources with are
done from the proper per-device fixup hook, and bridge resources are
set to enclose that token space.  This fixes various things such as
the output of /proc/iomem & ioports, among others.  This also fixes up
various boot messages as well.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:10 +11:00
Benjamin Herrenschmidt 3fd94c6b1a [POWERPC] Merge PCI resource allocation & assignment
The 32 bits PCI code now uses the generic code for assigning unassigned
resources and an algorithm similar to x86 for claiming existing ones.

This works far better than the 64 bits code which basically can only
claim existing ones (pci_probe_only=1) or would fall apart completely.

This merges them so that the new 32 bits implementation is used for both.

64 bits now gets the new PCI flags for controlling the behaviour, though
the old pci_probe_only global is still there for now to be cleared if you
want to.

I kept a pcibios_claim_one_bus() function mostly based on the old 64
bits code for use by the DLPAR hotplug. This will have to be cleaned
up, thought I hope it will work in the meantime.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:09 +11:00
Benjamin Herrenschmidt bf5e2ba28f [POWERPC] Merge PCI resource fixups
The PCI code in 32 and 64 bits fixes up resources differently.

32 bits uses a header quirk plus handles bridges in pcibios_fixup_bus()
while 64 bits does things in various places depending on whether you
are using OF probing, using PCI hotplug, etc...

This merges those by basically using the 32 bits approach for both,
with various tweaks to make 64 bits work with the new approach.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:09 +11:00
Benjamin Herrenschmidt fe2d338cdc [POWERPC] Merge pcibios_resource_to_bus/bus_to_resource
This merges the PowerPC 32 and 64 bits version of pcibios_resource_to_bus
and pcibios_bus_to_resource().

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:08 +11:00
Benjamin Herrenschmidt fa462f2d75 [POWERPC] pci32: Add platform option to enable /proc PCI domains
This adds flags the platforms can use to enable domain numbers
in /proc/bus/pci.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:08 +11:00
Benjamin Herrenschmidt 853ad6c2e7 [POWERPC] pci32: Remove obsolete PowerMac bus number hack
The 32 bits PCI code carries an old hack that was only useful for G5
machines.  Nowdays, the 32 bits kernel doesn't support any of those
machines anymore so the hack is basically never used, so remove it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:07 +11:00
Benjamin Herrenschmidt fc3fb71c3e [POWERPC] pci32: Add flags modifying the PCI code behaviour
This adds to the 32 bits PCI code some flags, replacing the old
pci_assign_all_busses global, that allow us to control various
aspects of the PCI probing, such as whether to re-assign all
resources or not, or to not try to assign anything at all.

This also adds the flag x86 already has to avoid ISA alignment
on bridges that don't have ISA forwarding enabled (no legacy
devices on the top level bus) and sets it for PowerMacs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:07 +11:00
Benjamin Herrenschmidt b9baa20b0a [POWERPC] pci32: Remove PowerMac P2P bridge IO hack
The 32 bits PowerPC PCI code has a hack for use by some PowerMacs
to try to re-open PCI<->PCI bridge IO resources that were closed
by the firmware.  This is no longer necessary as the generic code
will now do that for us.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:06 +11:00
Benjamin Herrenschmidt 0ec6b5c102 [POWERPC] pci32: Use generic pci_assign_unassign_resources
This makes the 32 bits PowerPC PCI code use the generic code to assign
resources to devices that had unassigned or conflicting resources.

This allow us to remove the local implementation that was incomplete and
could not assign for example a PCI<->PCI bridge from scratch, which is
needed on various embedded platforms.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:05 +11:00
Benjamin Herrenschmidt b1258fd102 [POWERPC] pci32: Remove bogus alignment message
There's a stale & bogus piece of code in 32 bits PCI code that
complains about ISA related alignment issues.  Just remove it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:05 +11:00
joe@perches.com 00d70419fc [POWERPC] arch/powerpc/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:15:51 +11:00
Michael Ellerman 84631f37cc [POWERPC] Implement pci_set_dma_mask() in terms of the dma_ops
PowerPC currently doesn't implement pci_set_dma_mask(), which means drivers
calling it will get the generic version in drivers/pci/pci.c.

The powerpc dma mapping ops include a dma_set_mask() hook, which luckily is
not implemented by anyone - so there is no bug in the fact that the hook
is currently never called.

However in future we'll add implementation(s) of dma_set_mask(), and so we
need pci_set_dma_mask() to call the hook.

To save adding a hook to the dma mapping ops, pci-set_consistent_dma_mask()
simply calls the dma_set_mask() hook and then copies the new mask into
dev.coherenet_dma_mask.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:15:49 +11:00
Milton Miller 53024fe250 [POWERPC] Optimize account_system_vtime
We have multiple calls to has_feature being inlined, but gcc can't
be sure that the store via get_paca() doesn't alias the path to
cur_cpu_spec->feature.

Reorder to put the calls to read_purr and read_spurr adjacent to each
other.  To add a sense of consistency, reorder the remaining lines to
perform parallel steps on purr and scaled purr of each line instead of
calculating and then using one value before going on to the next.

In addition, we can tell gcc that no SPURR means no PURR.  The test is
completely hidden in the PURR case, and in the !PURR case the second test
is eliminated resulting in the simple register copy in the out-of-line
branch.

Further, gcc sees get_paca()->system_time referenced several times and
allocates a register to address it (shadowing r13) instead of caching its
value.  Reading into a local varable saves the shadow of r13 and removes
a potentially duplicate load (between the nested if and its parent).

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:15:46 +11:00
Milton Miller db3801a858 [POWERPC] Depend on ->initialized in calc_steal_time
If CPU_FTR_PURR is not set, we will never set cpu_purr_data->initialized.
Checking via __get_cpu_var on 64 bit avoids one dependent load compared
to cpu_has_feature in the not-present case, and is always required when
it is present.  The code is under CONFIG_VIRT_CPU_ACCOUNTING so 32 bit
will not be affected.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:15:43 +11:00
Milton Miller 6e6b44e822 [POWERPC] Timer interrupt: use a struct for two per_cpu varables
timer_interrupt() was calculating per_cpu_offset several times, having to
start from the toc because of potential aliasing issues.

Placing both decrementer per_cpu varables in a struct and calculating
the address once with __get_cpu_var results in better code on both 32
and 64 bit.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:15:41 +11:00
Milton Miller 8b5621f183 [POWERPC] Use __get_cpu_var in time.c
Use __get_cpu_var(x) instead of per_cpu(x, smp_processor_id()), as it
is optimized on ppc64 to access the current cpu's per-cpu offset directly;
it's local_paca.offset instead of TOC->paca[local_paca->processor_id].offset.

This is the trivial portion, two functions with one use each.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:15:39 +11:00
Milton Miller c481887f2b [POWERPC] init_decrementer_clockevent can be static __init
as its only called from time_init, which is __init.

Also remove unneeded forward declaration.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:15:37 +11:00
Jochen Friedrich 9ac68d379e [POWERPC] Kill non-existent symbols from ksyms and commproc.h
Remove exports of __res and cpm_install_handler/cpm_free_handler.  Remove
cpm_install_handler/cpm_free_handler from the commproc.h as well.  Both
were used for ARCH=ppc and aren't defined for ARCH=powerpc.

CC      arch/powerpc/kernel/ppc_ksyms.o
arch/powerpc/kernel/ppc_ksyms.c:180: error: '__res' undeclared here (not in a function)
arch/powerpc/kernel/ppc_ksyms.c:180: warning: type defaults to 'int' in declaration of '__res'
make[1]: *** [arch/powerpc/kernel/ppc_ksyms.o] Error 1
make: *** [arch/powerpc/kernel] Error 2

LD      .tmp_vmlinux1
arch/powerpc/kernel/built-in.o:(__ksymtab+0x198): undefined reference to `cpm_free_handler'
arch/powerpc/kernel/built-in.o:(__ksymtab+0x1a0): undefined reference to `cpm_install_handler'
make: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-13 22:44:28 -06:00
Li Yang a58d52443f [POWERPC] add e300c4 entry to cputable
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 13:57:17 -06:00
Kumar Gala c1469f13de [POWERPC] Emulate isel (Integer Select) instruction
isel (Integer Select) is a new user space instruction in the
PowerISA 2.04 spec.  Not all processors implement it so lets emulate
to ensure code built with isel will run everywhere.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 13:57:16 -06:00
Benjamin Herrenschmidt 7ee17466b6 [POWERPC] Early debug forces console log level to max
This makes the early debug option force the console loglevel
to the max.  The early debug option is meant to catch messages very
early in the kernel boot process, in many cases, before the kernel
has a chance to parse the "debug" command line argument.  Thus it
makes sense when CONFIG_PPC_EARLY_DEBUG is set, to force the console
log level to the max at boot time.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 15:43:35 +11:00
Benjamin Herrenschmidt 837c54db21 [POWERPC] Add of_translate_dma_address
This adds a variant of of_translate_address that uses the dma-ranges
property instead of "ranges", it's to be used by PCI code in parsing
the dma-ranges property.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 15:43:35 +11:00
Benjamin Herrenschmidt f276b5ba0d [POWERPC] Remove useless volatiles in udbg_16550.c
This removes "volatile" from the MMIO pointer udbg_comport
in udbg_16550.c driver, it's useless and makes checkpatch.pl
complain when adding things to this file.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 15:43:35 +11:00
Benjamin Herrenschmidt 6d39635959 [POWERPC] Change 32-bit PCI message about resource allocation
The 32 bits PCI code will display a rather scary error message

   PCI: Cannot allocate resource region N of device XXX

at boot when the existing setup of a device as left by the
firmware doesn't match the kernel needs and the device needs
to be moved.  This is often not an error at all, as the kernel
will generally easily reallocate the device elsewhere.

This changes the message to something less scary and lowers
its level from error to warning.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 15:43:35 +11:00
Benjamin Herrenschmidt 05d3957e11 [POWERPC] Fix powerpc 32-bit resource fixup for 64-bit resources
The 32-bit powerpc resource fixup code uses unsigned longs to do the
offsetting of resources which overflows on platforms such as 4xx where
resources can be 64 bits.

This fixes it by using resource_size_t instead.

However, the IO stuff does rely on some 32 bits arithmetic, so we hack
by cropping the result of the fixups for IO resources with a 32 bits
mask.

This isn't the prettiest but should work for now until we change the
32 bits PCI code to do IO mappings like 64 bits does, within a reserved
are of the kernel address space.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 15:43:35 +11:00
Benjamin Herrenschmidt 13dccb9e65 [POWERPC] Merge pci_process_bridge_OF_ranges()
This merges the 32-bit and 64-bit implementations of
pci_process_bridge_OF_ranges().  The new function is cleaner than both
the old ones, and supports 64 bits ranges on ppc32 which is necessary
for the 4xx port.

It also adds some better (hopefully) output to the kernel log which
should help diagnose problems and makes better use of existing OF
parsing helpers (avoiding a few bugs of both implementations along
the way).

There are still a few unfortunate ifdef's but there is no way around
these for now at least not until some other bits of the PCI code are
made common.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 15:43:35 +11:00
Benjamin Herrenschmidt 25e81f925d [POWERPC] Make isa_mem_base common to 32 and 64 bits
This defines isa_mem_base on both 32 and 64 bits (it used to be 32 bits
only).  This avoids a few ifdef's in later patches and potentially can
allow support for VGA text mode on 64 bits powerpc.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 15:43:34 +11:00
Michael Neuling 584f8b71a2 [POWERPC] Use SLB size from the device tree
Currently we hardwire the number of SLBs to 64, but PAPR says we
should use the ibm,slb-size property to obtain the number of SLB
entries.  This uses this property instead of assuming 64.  If no
property is found, we assume 64 entries as before.

This soft patches the SLB handler, so it shouldn't change performance
at all.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:45:56 +11:00
Stephen Rothwell 44ef339073 [POWERPC] pci_controller->arch_data really is a struct device_node *
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:42:37 +11:00
Stephen Rothwell 6207e81695 [POWERPC] Don't special case pci_domain_nr() for iSeries
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:42:36 +11:00
Stephen Rothwell 9ccc4fd260 [POWERPC] Remove some iSeries platform checks from the PCI code
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:42:35 +11:00
Stephen Rothwell c96bede657 [POWERPC] iSeries: hose->buid is always zero for iSeries
so remove a firmware feature test.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:42:34 +11:00
Stephen Rothwell cb99302909 [POWERPC] iSeries: Call iSeries_pcibios_init from setup_arch
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:42:32 +11:00
Stephen Rothwell e60516e3d0 [POWERPC] Inline pci_setup_pci_controller as it has become trivial
and it becomes clear that we should use zalloc_maybe_bootmem.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:42:31 +11:00
Stephen Rothwell 68d315f597 [POWERPC] iommu_free_table doesn't need the device_node
It only needs the iommu_table address.  It also makes use of the node
name to print error messages.  So just pass it the things it needs.
This reduces the places that know about the pci_dn by one.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:41:33 +11:00
Nathan Lynch 0d9dc4b473 [POWERPC] lparcfg: Remove useless buffer allocation
The 'data' member of proc_ppc64_lparcfg is unused, but the lparcfg
module's init routine allocates 4K for it.

Remove the code which allocates and frees this buffer.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:41:28 +11:00
Stephen Rothwell 94b146ceee [POWERPC] kernel_execve is identical in 32 and 64 bit
so consolidate it into misc.S.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:34:39 +11:00
Stephen Rothwell 18cce5d321 [POWERPC] Use of_register_driver to implement of_register_platform_driver
Also use of_unregister_driver to implement of_unregister_platform_driver.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:34:39 +11:00
Paul Mackerras b242a60206 Merge branch 'linux-2.6' 2007-12-10 15:41:22 +11:00
Linus Torvalds 5fa2e15913 Merge branch 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] virtex bug fix: Use canonical value for AC97 interrupt xparams
  [POWERPC] Update defconfigs
  [POWERPC] PS3: Update ps3_defconfig
  [POWERPC] Update iseries_defconfig
  [POWERPC] Fix hardware IRQ time accounting problem.
2007-12-06 17:50:07 -08:00
Kumar Gala bee86f14d5 [POWERPC] Fix swapper_pg_dir size when CONFIG_PTE_64BIT=y on FSL_BOOKE
The size of swapper_pg_dir is 8k instead of 4k when using 64-bit PTEs
(CONFIG_PTE_64BIT).

This was reported by Cedric Hombourger <chombourger@gmail.com>

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-06 13:11:04 -06:00
Tony Breeds 81a3843f97 [POWERPC] Fix hardware IRQ time accounting problem.
The commit fa13a5a1f2 (sched: restore
deterministic CPU accounting on powerpc), unconditionally calls
update_process_tick() in system context.  In the deterministic
accounting case this is the correct thing to do.  However, in the
non-deterministic accounting case we need to not do this, since doing
this results in the time accounted as hardware irq time being
artificially elevated.

Also this collapses 2 consecutive '#ifdef CONFIG_VIRT_CPU_ACCOUNTING'
checks in time.h into one for neatness.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 16:08:59 +11:00
joe@perches.com df3c9019ed [POWERPC] Add missing spaces in printk formats
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03 13:56:27 +11:00
Stephen Rothwell 215a5575b5 [POWERPC] Remove redundant declaration of hose_list
It is already declared in ppc-pci.h which is included.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03 13:56:27 +11:00
Stephen Rothwell ebfc00f78c [POWERPC] Make global_phb_number static
since it's not used outside of arch/powerpc/kernel/pci-common.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03 13:56:26 +11:00
Benjamin Herrenschmidt 8d089085a4 [POWERPC] Cleanup SMT thread handling
This cleans up the SMT thread handling, removing some hard coded
assumptions and providing a set of helpers to convert between linux
cpu numbers, thread numbers and cores.

This implementation requires the number of threads per core to be a
power of 2 and identical on all cores in the system, but it's an
implementation detail, not an API requirement and so this limitation
can be lifted in the future if anybody ever needs it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03 13:56:25 +11:00
Paul Mackerras 8f51506164 Revert "[POWERPC] Fix RTAS os-term usage on kernel panic"
This reverts commit a2b51812a4.

It turns out that this change caused some machines to fail to come
back up when being rebooted, and generated an error in the hypervisor
error log on some machines.  The platform architecture (PAPR) is a
little unclear on exactly when the RTAS ibm,os-term function should be
called.  Until that is clarified I'm reverting this commit.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03 09:39:45 +11:00
Michael Neuling 2b46b5673c [POWERPC] Fix possible division by zero in scaled time accounting
If we get no user time and no system time allocated since the last
account_system_vtime, the system to user time ratio estimate can end
up dividing by zero.

This was causing a problem noticed by Balbir Singh.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-20 16:10:28 +11:00
Linas Vepstas a2b51812a4 [POWERPC] Fix RTAS os-term usage on kernel panic
The rtas_os_term() routine was being called at the wrong time.
The actual rtas call "os-term" will not ever return, and so
calling it from the panic notifier is too early.  Instead,
call it from the machine_reset() call.

This splits the rtas_os_term() routine into two: one part to capture
the kernel panic message, invoked during the panic notifier, and
another part that is invoked during machine_reset().

Prior to this patch, the os-term call was never being made,
because panic_timeout was always non-zero.  Calling os-term
helps keep the hypervisor happy!  We have to keep the hypervisor
happy to avoid service, dump and error reporting problems.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-20 16:10:09 +11:00
Olof Johansson fbe481756d [POWERPC] vdso: Fixes for cache block sizes
The current VDSO implementation is hardcoded to 128 byte cache blocks,
which are only used on IBM's 64-bit processors.

Convert it to get the cache block sizes out of vdso_data instead,
similar to how the ppc64 in-kernel cache flush does it.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-20 13:56:31 +11:00
Nathan Lynch 8f5c7579ca [POWERPC] Fix multiple bugs in rtas_ibm_suspend_me code
There are several issues with the rtas_ibm_suspend_me code, which
enables platform-assisted suspension of an LPAR as covered in PAPR
2.2.

1.) rtas_ibm_suspend_me uses on_each_cpu() to invoke
rtas_percpu_suspend_me on all cpus via IPI:

if (on_each_cpu(rtas_percpu_suspend_me, &data, 1, 0))
...

'data' is on the calling task's stack, but rtas_ibm_suspend_me takes
no measures to ensure that all instances of rtas_percpu_suspend_me are
finished accessing 'data' before returning.  This can result in the
IPI'd cpus accessing random stack data and getting stuck in H_JOIN.

This is addressed by using an atomic count of workers and a completion
on the stack.

2.) rtas_percpu_suspend_me is needlessly calling H_JOIN in a loop.
The only event that can cause a cpu to return from H_JOIN is an H_PROD
from another cpu or a NMI/system reset.  Each cpu need call H_JOIN
only once per suspend operation.

Remove the loop and the now unnecessary 'waiting' state variable.

3.) H_JOIN must be called with MSR[EE] off, but lazy interrupt
disabling may cause the caller of rtas_ibm_suspend_me to call H_JOIN
with it on; the local_irq_disable() in on_each_cpu() is not
sufficient.

Fix this by explicitly saving the MSR and clearing the EE bit before
calling H_JOIN.

4.) H_PROD is being called with the Linux logical cpu number as the
parameter, not the platform interrupt server value.  (It's also being
called for all possible cpus, which is harmless, but unnecessary.)

This is fixed by calling H_PROD for each online cpu using
get_hard_smp_processor_id(cpu) for the argument.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-19 15:11:30 +11:00
Benjamin Herrenschmidt b7a2da1199 [POWERPC] Fix early btext debug on PowerMac
The early btext debug wouldn't work on PowerMac when booted from BootX
due to the code looking for the wrong property name.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13 16:22:44 +11:00