Separate topic branch for bxt didn't work out since we needed to
refactor the gmbus code a bit to make it look decent. So backmerge.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
vma are more frequently allocated than objects and so should equally
benefit from having a dedicated slab.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
requests are even more frequently allocated than objects and equally
benefit from having a dedicated slab.
v2: Rebase
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I woke up one morning and found 50k objects sitting in the batch pool
and every search seemed to iterate the entire list... Painting the
screen in oils would provide a more fluid display.
One issue with the current design is that we only check for retirements
on the current ring when preparing to submit a new batch. This means
that we can have thousands of "active" batches on another ring that we
have to walk over. The simplest way to avoid that is to split the pools
per ring and then our LRU execution ordering will also ensure that the
inactive buffers remain at the front.
v2: execlists still requires duplicate code.
v3: execlists requires more duplicate code
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Modify the Gen9 SSEU info initialization logic to support
Broxton. Broxton reuses the SKL fuse registers but has at most
1 slice and 6 EU per subslice.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: Rebase on top of the for_each_pipe() change adding dev_priv as first
argument.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's completely unused and Tommi noticed that the #define is borked
since forever. I've done a git search in userspace and only found
broken definitions and no users anywhere.
Cc: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Setup new I915_GETPARAM ioctl entries for subslice total and
EU total. Userspace drivers need these values when constructing
GPGPU commands. This kernel query method is intended to replace
the PCI ID-based tables that userspace drivers currently maintain.
The kernel driver can employ fuse register reads as needed to
ensure the most accurate determination of GT config attributes.
This first became important with Cherryview in which the config
could differ between devices with the same PCI ID.
The kernel detection of these values is device-specific and not
included in this patch. Because zero is not a valid value for any of
these parameters, a value of zero is interpreted as unknown for the
device. Userspace drivers should continue to maintain ID-based tables
for older devices not supported by the new query method.
v2: Increment our I915_GETPARAM indices to fit after REVISION
which was merged ahead of us.
For: VIZ-4636
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Tested-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Acked-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Total EU was already being detected on CHV, so we just add the
additional info parameters. The detection method is changed to
be more robust in the case of subslice fusing - we don't want
to trust the EU fuse bits corresponding to subslices which are
fused-off.
v2: Fixed subslice disable bitmasks and removed unnecessary ?
operation (Ville)
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Adds a parameter which can be used with DRM_I915_GETPARAM to query the
GPU revision. The intention is to use this in Mesa to implement the
WaDisableSIMD16On3SrcInstr workaround on Skylake but only for
revision 2.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
UMS is gone, this is dead code.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When one EU is disabled in a particular subslice, we can tune how the
work is spread between subslices to improve EU utilization.
v2: - Use a bitfield to record which subslice(s) has(have) 7 EUs. That
will also make the machinery work if several sublices have 7 EUs.
(Jeff Mcgee)
- Only apply the different hashing algorithm if the slice is
effectively unbalanced by checking there's a single subslice with
7 EUs. (Jeff Mcgee)
v3: Fix typo in comment (Jeff Mcgee)
Issue: VIZ-3845
Cc: Jeff Mcgee <jeff.mcgee@intel.com>
Reviewed-by: Jeff Mcgee <jeff.mcgee@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Read fuse registers to determine the available slice total,
subslice total, subslice per slice, EU total, and EU per subslice
counts of the SKL device. The EU per subslice attribute is more
precisely defined as the maximum EU available on any one subslice,
since available EU counts may vary across subslices due to fusing.
Set flags indicating the SKL device's slice/subslice/EU (SSEU)
power gating capability. Make all values available via debugfs
entry 'i915_sseu_status'.
v2: Several small clean-ups suggested by Damien. Most notably,
used smaller types for the new device info fields to reduce
memory usage and improved the clarity/readability of the
method used to extract attribute values from the fuse
registers.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Display switch logic is added to notify the host side that
current vGPU have a valid surface to show. It does so by
writing the display_ready field in PV INFO page, and then
will be handled in the host side. This is useful to avoid
trickiness when the VM's framebuffer is being accessed in
the middle of VM modesetting, e.g. compositing the framebuffer
in the host side.
v2:
- move the notification code outside the 'else' in load sequence
- remove the notification code in intel_crtc_set_config()
v4:
- code rebase, no need to define another dev_priv
- use #define instead of enum for display readiness
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhiyuan Lv <zhiyuan.lv@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now when we declare gpu errors only through our own dedicated
hangcheck workqueue there is no need to have a separate workqueue
for handling the resetting and waking up the clients as the deadlock
concerns are no more.
The only exception is i915_debugfs::i915_set_wedged, which triggers
error handling through process context. However as this is only used through
test harness it is responsibility for test harness not to introduce hangs
through both debug interface and through hangcheck mechanism at the same time.
Remove gpu_error.work and let the hangcheck work do the tasks it used to.
v2: Add a big warning sign into i915_debugfs::i915_set_wedged (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When run as a timer, i915_hangcheck_elapsed() must adhere to all the
rules of running in a softirq context. This is advantageous to us as we
want to minimise the risk that a driver bug will prevent us from
detecting a hung GPU. However, that is irrelevant if the driver bug
prevents us from resetting and recovering. Still it is prudent not to
rely on mutexes inside the checker, but given the coarseness of
dev->struct_mutex doing so is extremely hard.
Give in and run from a work queue, i.e. outside of softirq.
v2: Use own workqueue to avoid deadlocks (Daniel)
Cleanup commit msg and add comment to i915_queue_hangcheck() (Chris)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <dnaiel.vetter@ffwll.chm>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Remove accidental kerneldoc comment starter, to appease the 0
day builder.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will let userland only try to use the new ring
when the appropriate kernel is present
v2: change the number to be consistent with upstream (Zhipeng)
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Reviewed--by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Starting with Cherryview, devices may have a varying number of EU for
a given ID due to creative fusing. Punit support different frequency for
different fuse data. We use this patch to help get total eu enabled and
read the right offset to get RP0
Based upon a patch from Jeff, but reworked to only store eu_total and
avoid sending info to userspace
v2: Format register definitions (Jani)
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Acked-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Conflicts:
drivers/gpu/drm/i915/intel_runtime_pm.c
Separate branch so that Takashi can also pull just this refactoring
into sound-next.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Register a component to be used to interface with the snd_hda_intel
driver. This is meant to replace the same interface that is currently
based on module symbol lookup.
v2:
- change roles between the hda and i915 components (Daniel)
- add the implementation to a new file (Jani)
- use better namespacing (Jani)
v3:
- move the implementation to intel_audio.c (Daniel)
- rename display_component to audio_component (Daniel)
- add kerneldoc (Daniel)
v4:
- run forgotten git rm i915_component.c (Jani)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sometimes we wish to tweak how an individual context behaves. Since we
always create a context for every filp, this means that individual
processes can fine tune their behaviour even if they do not explicitly
create a context.
The first example parameter here is to enable multi-process GPU testing,
but the interface should be able to cope with passing arbitrarily complex
parameters.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Testcase: igt/gem_reset_stats/ban-period-*
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch provides support to create write-combining virtual mappings of
GEM object. It intends to provide the same funtionality of 'mmap_gtt'
interface without the constraints and contention of a limited aperture
space, but requires clients handles the linear to tile conversion on their
own. This is for improving the CPU write operation performance, as with such
mapping, writes and reads are almost 50% faster than with mmap_gtt. Similar
to the GTT mmapping, unlike the regular CPU mmapping, it avoids the cache
flush after update from CPU side, when object is passed onto GPU. This
type of mapping is specially useful in case of sub-region update,
i.e. when only a portion of the object is to be updated. Using a CPU mmap
in such cases would normally incur a clflush of the whole object, and
using a GTT mmapping would likely require eviction of an active object or
fence and thus stall. The write-combining CPU mmap avoids both.
To ensure the cache coherency, before using this mapping, the GTT domain
has been reused here. This provides the required cache flush if the object
is in CPU domain or synchronization against the concurrent rendering.
Although the access through an uncached mmap should automatically
invalidate the cache lines, this may not be true for non-temporal write
instructions and also not all pages of the object may be updated at any
given point of time through this mapping. Having a call to get_pages in
set_to_gtt_domain function, as added in the earlier patch 'drm/i915:
Broaden application of set-domain(GTT)', would guarantee the clflush and
so there will be no cachelines holding the data for the object before it
is accessed through this map.
The drm_i915_gem_mmap structure (for the DRM_I915_GEM_MMAP_IOCTL) has been
extended with a new flags field (defaulting to 0 for existent users). In
order for userspace to detect the extended ioctl, a new parameter
I915_PARAM_MMAP_VERSION has been added for versioning the ioctl interface.
v2: Fix error handling, invalid flag detection, renaming (ickle)
v3: Rebase to latest drm-intel-nightly codebase
The new mmapping is exercised by igt/gem_mmap_wc,
igt/gem_concurrent_blit and igt/gem_gtt_speed.
Change-Id: Ie883942f9e689525f72fe9a8d3780c3a9faa769a
Signed-off-by: Akash Goel <akash.goel@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch sets up all of the tracking and copying necessary to
use batch pools with the command parser and dispatches the copied
(shadow) batch to the hardware.
After this patch, the parser is in 'enabling' mode.
Note that performance takes a hit from the copy in some cases
and will likely need some work. At a rough pass, the memcpy
appears to be the bottleneck. Without having done a deeper
analysis, two ideas that come to mind are:
1) Copy sections of the batch at a time, as they are reached
by parsing. Might improve cache locality.
2) Copy only up to the userspace-supplied batch length and
memset the rest of the buffer. Reduces the number of reads.
v2:
- Remove setting the capacity of the pool
- One global pool instead of per-ring pools
- Replace batch_obj with shadow_batch_obj and hook into eb->vmas
- Memset any space in the shadow batch beyond what gets copied
- Rebased on execlist prep refactoring
v3:
- Rebase on chained batch handling
- Squash in setting the secure dispatch flag
- Add a note about the interaction w/secure dispatch pinning
- Check for request->batch_obj == NULL in i915_gem_free_request
v4:
- Fix read domains for shadow_batch_obj
- Remove the set_to_gtt_domain call from i915_parse_cmds
- ggtt_pin/unpin in the parser block to simplify error handling
- Check USES_FULL_PPGTT before setting DISPATCH_SECURE flag
- Remove i915_gem_batch_pool_put calls
v5:
- Move 'pending_read_domains |= I915_GEM_DOMAIN_COMMAND' after
the parser (danvet, from v4 0/7 feedback)
Issue: VIZ-4719
Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com>
Reviewed-By: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Found one more!
With this we can clear up the ggtt init code a bit, yay!
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
With this all the ums nonsense around gem setup/teardown has
disappeared, yay!
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Again just complicates gem init functions and makes a general mess out
of everything.
Good riddance!
v2: In my enthusiasm to start removing dri1/ums crud I went overboard a
bit and killed parts of hangcheck. Resurrect it.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
We've killed ums support by now, it's time to reap the benefits. This
one here is getting in the way of doing some ring init cleanup.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
KMS always intializes, this was only a valid check when userspace
was still in control of the kernel driver.
v2: Comment that we outright reject all dri1/ums params.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Whether we'll reject them or no-op doesn't really matter ...
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the deprecation of UMS, and by association DRI1, we have a tough
choice when updating the ring access routines. We either rewrite the
DRI1 routines blindly without testing (so likely to be broken) or take
the liberty of declaring them no longer supported and remove them
entirely. This takes the latter approach.
v2: Also remove the DRI1 sarea updates
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Fix rebase conflicts.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So with all the code movement and extraction in intel_pm.c in -next
git is hopelessly confused with
commit 2208d655a9
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Nov 14 09:25:29 2014 +0100
drm/i915: drop WaSetupGtModeTdRowDispatch:snb
from -fixes. Worse even small changes in -next move around the
conflict context so rerere is equally useless. Let's just backmerge
and be done with it.
Conflicts:
drivers/gpu/drm/i915/i915_drv.c
drivers/gpu/drm/i915/intel_pm.c
Except for git getting lost no tricky conflicts really.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
It's magic, but it seems to work.
This fixes a regression introduced in
commit 1bb9e632a0
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Jul 8 10:02:43 2014 +0200
drm/i915: Only unbind vgacon, not other console drivers
My best guess is that the vga fbdev driver falls over if we rip out
parts of vgacon. Hooray.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82439
Cc: stable@vger.kernel.org (v3.16+)
Reported-and-tested-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently objects for which the hardware needs a contiguous physical
address are allocated a shadow backing storage to satisfy the contraint.
This shadow buffer is not wired into the normal obj->pages and so the
physical object is incoherent with accesses via the GPU, GTT and CPU. By
setting up the appropriate scatter-gather table, we can allow userspace
to access the physical object via either a GTT mmaping of or by rendering
into the GEM bo. However, keeping the CPU mmap of the shmemfs backing
storage coherent with the contiguous shadow is not yet possible.
Fortuituously, CPU mmaps of objects requiring physical addresses are not
expected to be coherent anyway.
This allows the physical constraint of the GEM object to be transparent
to userspace and allow it to efficiently render into or update them via
the GTT and GPU.
v2: Fix leak of pci handle spotted by Ville
v3: Remove the now duplicate call to detach_phys_object during free.
v4: Wait for rendering before pwrite. As this patch makes it possible to
render into the phys object, we should make it correct as well!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
By now we handle switcheroo and legacy suspend/resume the same way, so
no need to keep separate functions for them.
No functional change.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In its current place, it just segfaults while trying to access the
CRTC structures:
[ 9132.421681] Call Trace:
[ 9132.421707] [<ffffffffa01130d8>] i915_get_crtc_scanoutpos+0x1e8/0x220 [i915]
[ 9132.421727] [<ffffffffa001da34>] drm_calc_vbltimestamp_from_scanoutpos+0x94/0x330 [drm]
[ 9132.421744] [<ffffffffa001d240>] ?vblank_disable_and_save+0x40/0x1e0 [drm]
[ 9132.421769] [<ffffffffa0114328>] i915_get_vblank_timestamp+0x68/0xb0 [i915]
[ 9132.421786] [<ffffffffa001d094>] drm_get_last_vbltimestamp+0x44/0x80 [drm]
[ 9132.421801] [<ffffffffa001d3a6>] vblank_disable_and_save+0x1a6/0x1e0 [drm]
[ 9132.421817] [<ffffffffa001eac1>] drm_vblank_cleanup+0x61/0xa0 [drm]
[ 9132.421849] [<ffffffffa0177a5e>] i915_driver_unload+0xde/0x290 [i915]
[ 9132.421867] [<ffffffffa0020264>] drm_dev_unregister+0x24/0xb0 [drm]
[ 9132.421884] [<ffffffffa002090e>] drm_put_dev+0x1e/0x70 [drm]
[ 9132.421901] [<ffffffffa00e01e0>] i915_pci_remove+0x10/0x20 [i915]
[ 9132.421910] [<ffffffff81347556>] pci_device_remove+0x36/0xb0
[ 9132.421920] [<ffffffff8140084a>] __device_release_driver+0x7a/0xf0
[ 9132.421928] [<ffffffff81400fc8>] driver_detach+0xb8/0xc0
[ 9132.421936] [<ffffffff8140054a>] bus_remove_driver+0x4a/0xb0
[ 9132.421944] [<ffffffff81401717>] driver_unregister+0x27/0x50
[ 9132.421953] [<ffffffff81346f65>] pci_unregister_driver+0x25/0x70
[ 9132.421971] [<ffffffffa00229c8>] drm_pci_exit+0x78/0xa0 [drm]
[ 9132.422000] [<ffffffffa017a6d2>] i915_exit+0x20/0x94e [i915]
[ 9132.422009] [<ffffffff810fb9dc>] SyS_delete_module+0x13c/0x1f0
[ 9132.422019] [<ffffffff8131c5fb>] ?
trace_hardirqs_on_thunk+0x3a/0x3f
[ 9132.422028] [<ffffffff816f7792>] system_call_fastpath+0x16/0x1b
This means it has to be before intel_modeset_cleanup, which cleans the
CRTC structures. But if we move it to before intel_fbdev_fini(), we
get WARNs because intel_fbdev_fini() still tries to use the vblanks,
so the only acceptable point for drm_vblank_cleanup() seems to be this
place.
Related commit:
commit cbb47d179f
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Sep 23 17:33:20 2013 -0300
drm/i915: Add some missing steps to i915_driver_load error path
Testsuite: igt/drv_module_reload
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77511
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83484
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's the new world order!
Not going full monty on these here and rolling this out throughout the
subsequent call chains since this is just for the kerneldoc. Later on
we can go more crazy, especially once we've embedded drm_device
correctly.
v2: Also frob the runtime_pm functions ...
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Double negations just parse harder. Also this allows us to ditch some
init code since clearing to 0 dtrt. Also ditch the assignment in
intel_pm_setup, that's not redundant since we do the assignement now
while setting up interrupts.
While at it do engage in a bit of OCD and wrap up the few lines of
setup/teardown code into little helper functions: intel_irq_fini for
cleanup and intel_irq_init_hw for hw setup.
v2: Use _install/_uninstall for the new wrapper function names as
Paulo suggested.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Allows us to mark it static and so forgoe the kerneldoc for it.
Note that intel_power_domains_fini is also called from failure paths
in the driver load sequence. But the call to runtime_pm_disable for
that is harmless since by default runtime pm is already disabled.
v2: Augment the commit message as discussed with Imre on irc.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- fini goes with init, so call it intel_power_domains_fini. While
at it shovel some of the fini code that leaked out of it back in.
- give power_enabled functions the verb _is_ to make the meaning clearer.
Also use a __ prefix instead of _unlocked to really discourage users.
- rename runtime_pm_init/fini to enable/disable since that's what they do.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
SKL stage 1 patches still need polish so will likely miss the 3.18
merge window. We've decided to postpone to 3.19 so let's pull this in
to make patch merging and conflict handling easier.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
On Skylake, we use plane1 as primary plane and plane2/3 as sprite
planes.
v2: Rebase on top of the for_each_pipe() change adding dev_priv as first
argument.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Originally the irq safe spinlock was required because of asle
interrupts. But since
commit 91a60f2071
Author: Jani Nikula <jani.nikula@intel.com>
Date: Thu Oct 31 18:55:48 2013 +0200
drm/i915: move opregion asle request handling to a work queue
there's no need for this any more. So switch to the simpler mutex.
v2: Cite the right commit, spotted by Jani.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- final bits (again) for the rotation support (Sonika Jindal)
- support bl_power in the intel backlight (Jani)
- vdd handling improvements from Ville
- i830M fixes from Ville
- piles of prep work all over to make skl enabling just plug in (Damien, Sonika)
- rename DP training defines to reflect latest edp standards, this touches all
drm drivers supporting DP (Sonika Jindal)
- cache edids during single detect cycle to avoid re-reading it for e.g. audio,
from Chris
- move w/a for registers which are stored in the hw context to the context init
code (Arun&Damien)
- edp panel power sequencer fixes, helps chv a lot (Ville)
- piles of other chv fixes all over
- much more paranoid pageflip handling with stall detection and better recovery
from Chris
- small things all over, as usual
* tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel: (114 commits)
drm/i915: Update DRIVER_DATE to 20140905
drm/i915: Decouple the stuck pageflip on modeset
drm/i915: Check for a stalled page flip after each vblank
drm/i915: Introduce a for_each_plane() macro
drm/i915: Rewrite ABS_DIFF() in a safer manner
drm/i915: Add comments explaining the vdd on/off functions
drm/i915: Move DP port disable to post_disable for pch platforms
drm/i915: Enable DP port earlier
drm/i915: Turn on panel power before doing aux transfers
drm/i915: Be more careful when picking the initial power sequencer pipe
drm/i915: Reset power sequencer pipe tracking when disp2d is off
drm/i915: Track which port is using which pipe's power sequencer
drm/i915: Fix edp vdd locking
drm/i915: Reset the HEAD pointer for the ring after writing START
drm/i915: Fix unsafe vma iteration in i915_drop_caches
drm/i915: init sprites with univeral plane init function
drm/i915: Check of !HAS_PCH_SPLIT() in PCH transcoder funcs
drm/i915: Use HAS_GMCH_DISPLAY un underrun reporting code
drm/i915: Use IS_BROADWELL() instead of IS_GEN8() in forcewake code
drm/i915: Don't call gen8_fbc_sw_flush() on chv
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUFjfVAAoJEHm+PkMAQRiGANkIAIU3PNrAz9dIItq8a/rEAhnx
l2shHoOyEmyNR2apholM3BPUNX50cbsc/HGdi7lZKLkA/ifAj6B9nFD2NzVsIChD
1QWVcvdkKlVuxXCDd26qbijlfmbTOAWrLw9ntvM+J6ZtECM6zCAZF4MAV/FwogPq
ETGKD76AxJtVIhBMS99troAiC1YxmQ7DKgEr8CraTOR1qwXEonnPCmN/IZA6x2/G
EXiihOuQB5me1X7k4PI0V8CDscQOn+3B2CQHIrjRB+KiTF+iKIuI8n6ORC6bpFh+
U8UZP9wLlIG1BrUHG83pIndglIHotqPcjmtfl1WGrRr2hn7abzVSfV+g5Syo3Vg=
=Ep+s
-----END PGP SIGNATURE-----
drm: backmerge tag 'v3.17-rc5' into drm-next
This is requested to get the fixes for intel and radeon into the
same tree for future development work.
i915_display.c: fix missing dev_priv conflict.
And move a few legayc functions to start things over there.
It compiles ...
Inspired by a patch from Dave Airlie, but with a split between drm.ko
private legacy functions and stuff used by drivers.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move internal declarations to drm_legacy.h and add drm_legacy_*() prefix
to all legacy functions.
[airlied: add a bit of an explaination to drm_legacy.h]
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
A bunch of warnings fire on some ->irq_postinstall hooks since those
can enable interrupts (e.g. rps interrupts). And then our ordering
self-checks fire and complain.
To fix that set the tracking boolen before enabling the irqs with
drm_irq_install. Quoting the discussion with Jesse why that's safe:
On Tue, Aug 26, 2014 at 11:18 PM, Jesse Barnes <jbarnes@virtuousgeek.org> wrote:
> Yes, it might work, but if you look through the history, we set this
> field carefully; first to true in the irq_init code, then to false only
> after the irq_install completes. So I think your fragility arguments
> apply to this change too.
Well we've done it in 4 commits or so, but currently we have:
- Set irqs_disabled to true early in driver load to make sure checks
that. That's done in irq_init, which is totally not the function that
enables interrupts, only the function that initializes all the vtables
and similar things. We actually have a fairly sane naming scheme
nowadays (not fully consistent ofc): _init is sw setup,
_enable/_hw_init is the actual hw setup. That is done in
95f25beddb
- Set irqs_disabled to false right after the irqs are actually
enabled. This is done in ed2e6df189
So my change should only move the flag change over the ->preinstall
and ->postinstall hooks. I've done a little audit and didn't spot
anything amiss. Furthermore the runtime pm setup already clears
irqs_disabled _before_ calling these two hooks.
This regression has been introduced in
commit ed2e6df189
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Fri Jun 20 09:39:36 2014 -0700
drm/i915: clear pm._irqs_disabled field after installing IRQs
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> # gm45, ilk
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This gets us out of our init code and out to userspace quite a bit
faster, but does open us up to some bugs given the state of our init
time locking.
v2: switch to async_schedule (Chris)
check with lockdep, seems happy (Jesse)
move hotplug enable flag set to fbdev_initial_config (Jesse)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Rebase on top of the dev_priv->enable_hotplug_processing
removal.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter