Commit Graph

19 Commits

Author SHA1 Message Date
Alan Cox c3709e6734 x86, kvm: KVM paravirt kernels don't check for CPUID being unavailable
We set cpuid_level to -1 if there is no CPUID instruction (only
possible on i386).

Signed-off-by: Alan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/20120514174059.30236.1064.stgit@bluebook
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=12122
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-05-14 10:49:32 -07:00
Glauber Costa d910f5c106 KVM guest: KVM Steal time registration
This patch implements the kvm bits of the steal time infrastructure.
The most important part of it, is the steal time clock. It is an
continuous clock that shows the accumulated amount of steal time
since vcpu creation. It is supposed to survive cpu offlining/onlining.

[marcelo: fix build with CONFIG_KVM_GUEST=n]

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Tested-by: Eric B Munson <emunson@mgebm.net>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Avi Kivity <avi@redhat.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-24 11:49:36 +03:00
Glauber Costa c9aaa8957f KVM: Steal time implementation
To implement steal time, we need the hypervisor to pass the guest
information about how much time was spent running other processes
outside the VM, while the vcpu had meaningful work to do - halt
time does not count.

This information is acquired through the run_delay field of
delayacct/schedstats infrastructure, that counts time spent in a
runqueue but not running.

Steal time is a per-cpu information, so the traditional MSR-based
infrastructure is used. A new msr, KVM_MSR_STEAL_TIME, holds the
memory area address containing information about steal time

This patch contains the hypervisor part of the steal time infrasructure,
and can be backported independently of the guest portion.

[avi, yongjie: export delayacct_on, to avoid build failures in some configs]

Signed-off-by: Glauber Costa <glommer@redhat.com>
Tested-by: Eric B Munson <emunson@mgebm.net>
CC: Rik van Riel <riel@redhat.com>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Yongjie Ren <yongjie.ren@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-14 12:59:14 +03:00
Glauber Costa 9ddabbe72e KVM: KVM Steal time guest/host interface
To implement steal time, we need the hypervisor to pass the guest information
about how much time was spent running other processes outside the VM.
This is per-vcpu, and using the kvmclock structure for that is an abuse
we decided not to make.

In this patchset, I am introducing a new msr, KVM_MSR_STEAL_TIME, that
holds the memory area address containing information about steal time

This patch contains the headers for it. I am keeping it separate to facilitate
backports to people who wants to backport the kernel part but not the
hypervisor, or the other way around.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Tested-by: Eric B Munson <emunson@mgebm.net>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-12 13:17:03 +03:00
Glauber Costa 4b6b35f55c KVM: Add constant to represent KVM MSRs enabled bit in guest/host interface
This patch is simple, put in a different commit so it can be more easily
shared between guest and hypervisor. It just defines a named constant
to indicate the enable bit for KVM-specific MSRs.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Tested-by: Eric B Munson <emunson@mgebm.net>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-12 13:17:02 +03:00
Jan Kiszka d4c90b0043 KVM: x86: Add missing inline tag to kvm_read_and_reset_pf_reason
May otherwise generates build warnings about unused
kvm_read_and_reset_pf_reason if included without CONFIG_KVM_GUEST
enabled.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:27 +02:00
Gleb Natapov 6adba52742 KVM: Let host know whether the guest can handle async PF in non-userspace context.
If guest can detect that it runs in non-preemptable context it can
handle async PFs at any time, so let host know that it can send async
PF even if guest cpu is not in userspace.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:21 +02:00
Gleb Natapov 631bc48782 KVM: Handle async PF in a guest.
When async PF capability is detected hook up special page fault handler
that will handle async page fault events and bypass other page faults to
regular page fault handler. Also add async PF handling to nested SVM
emulation. Async PF always generates exit to L1 where vcpu thread will
be scheduled out until page is available.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:16 +02:00
Gleb Natapov fd10cde929 KVM paravirt: Add async PF initialization to PV guest.
Enable async PF in a guest if async PF capability is discovered.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:14 +02:00
Gleb Natapov 344d9588a9 KVM: Add PV MSR to enable asynchronous page faults delivery.
Guest enables async PF vcpu functionality using this MSR.

Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:12 +02:00
Gleb Natapov ca3f10172e KVM paravirt: Move kvm_smp_prepare_boot_cpu() from kvmclock.c to kvm.c.
Async PF also needs to hook into smp_prepare_boot_cpu so move the hook
into generic code.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:10 +02:00
Alexander Graf ba49296236 KVM: Move kvm_guest_init out of generic code
Currently x86 is the only architecture that uses kvm_guest_init(). With
PowerPC we're getting a second user, but the signature is different there
and we don't need to export it, as it uses the normal kernel init framework.

So let's move the x86 specific definition of that function over to the x86
specfic header file.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:50:49 +02:00
Glauber Costa 3a0d7256a6 x86, paravirt: don't compute pvclock adjustments if we trust the tsc
If the HV told us we can fully trust the TSC, skip any
correction

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:41:05 +03:00
Glauber Costa 0e6ac58acb KVM: x86: add new KVMCLOCK cpuid feature
This cpuid, KVM_CPUID_CLOCKSOURCE2, will indicate to the guest
that kvmclock is available through a new set of MSRs. The old ones
are deprecated.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:41:02 +03:00
Glauber Costa 11c6bffa42 KVM: x86: change msr numbers for kvmclock
Avi pointed out a while ago that those MSRs falls into the pentium
PMU range. So the idea here is to add new ones, and after a while,
deprecate the old ones.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:41:01 +03:00
Gleb Natapov 55cd8e5a4e KVM: Implement bare minimum of HYPER-V MSRs
Minimum HYPER-V implementation should have GUEST_OS_ID, HYPERCALL and
VP_INDEX MSRs.

[avi: fix build on i386]

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:57 -03:00
Avi Kivity fa6870c6b6 KVM: Add missing #include
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 10:46:49 +03:00
H. Peter Anvin 1965aae3c9 x86: Fix ASM_X86__ header guards
Change header guards named "ASM_X86__*" to "_ASM_X86_*" since:

a. the double underscore is ugly and pointless.
b. no leading underscore violates namespace constraints.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-22 22:55:23 -07:00
Al Viro bb8985586b x86, um: ... and asm-x86 move
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-22 22:55:20 -07:00