Commit Graph

11 Commits

Author SHA1 Message Date
Paul E. McKenney 900b1028ec srcu: Allow SRCU to access rcu_scheduler_active
This is primarily a code-movement commit in preparation for allowing
SRCU to handle early-boot SRCU grace periods.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-04-18 11:38:18 -07:00
Paul E. McKenney 6c8c148542 rcu: Semicolon inside RCU_TRACE() for Tiny RCU
The current use of "RCU_TRACE(statement);" can cause odd bugs, especially
where "statement" is a local-variable declaration, as it can leave a
misplaced ";" in the source code.  This commit therefore converts these
to "RCU_TRACE(statement;)", which avoids the misplaced ";".

Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-04-18 11:38:17 -07:00
Paul E. McKenney 52d7e48b86 rcu: Narrow early boot window of illegal synchronous grace periods
The current preemptible RCU implementation goes through three phases
during bootup.  In the first phase, there is only one CPU that is running
with preemption disabled, so that a no-op is a synchronous grace period.
In the second mid-boot phase, the scheduler is running, but RCU has
not yet gotten its kthreads spawned (and, for expedited grace periods,
workqueues are not yet running.  During this time, any attempt to do
a synchronous grace period will hang the system (or complain bitterly,
depending).  In the third and final phase, RCU is fully operational and
everything works normally.

This has been OK for some time, but there has recently been some
synchronous grace periods showing up during the second mid-boot phase.
This code worked "by accident" for awhile, but started failing as soon
as expedited RCU grace periods switched over to workqueues in commit
8b355e3bc1 ("rcu: Drive expedited grace periods from workqueue").
Note that the code was buggy even before this commit, as it was subject
to failure on real-time systems that forced all expedited grace periods
to run as normal grace periods (for example, using the rcu_normal ksysfs
parameter).  The callchain from the failure case is as follows:

early_amd_iommu_init()
|-> acpi_put_table(ivrs_base);
|-> acpi_tb_put_table(table_desc);
|-> acpi_tb_invalidate_table(table_desc);
|-> acpi_tb_release_table(...)
|-> acpi_os_unmap_memory
|-> acpi_os_unmap_iomem
|-> acpi_os_map_cleanup
|-> synchronize_rcu_expedited

The kernel showing this callchain was built with CONFIG_PREEMPT_RCU=y,
which caused the code to try using workqueues before they were
initialized, which did not go well.

This commit therefore reworks RCU to permit synchronous grace periods
to proceed during this mid-boot phase.  This commit is therefore a
fix to a regression introduced in v4.9, and is therefore being put
forward post-merge-window in v4.10.

This commit sets a flag from the existing rcu_scheduler_starting()
function which causes all synchronous grace periods to take the expedited
path.  The expedited path now checks this flag, using the requesting task
to drive the expedited grace period forward during the mid-boot phase.
Finally, this flag is updated by a core_initcall() function named
rcu_exp_runtime_mode(), which causes the runtime codepaths to be used.

Note that this arrangement assumes that tasks are not sent POSIX signals
(or anything similar) from the time that the first task is spawned
through core_initcall() time.

Fixes: 8b355e3bc1 ("rcu: Drive expedited grace periods from workqueue")
Reported-by: "Zheng, Lv" <lv.zheng@intel.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Stan Kain <stan.kain@gmail.com>
Tested-by: Ivan <waffolz@hotmail.com>
Tested-by: Emanuel Castelo <emanuel.castelo@gmail.com>
Tested-by: Bruno Pesavento <bpesavento@infinito.it>
Tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Frederic Bezies <fredbezies@gmail.com>
Cc: <stable@vger.kernel.org> # 4.9.0-
2017-01-14 21:23:48 -08:00
Paul Gortmaker 9fc9204ef9 rcu: Make rcu/tiny_plugin.h explicitly non-modular
The Kconfig currently controlling compilation of this code is:

init/Kconfig:config TINY_RCU
init/Kconfig:   bool

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the code there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.  We could
consider moving this to an earlier initcall (subsys?) if desired.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-02-23 19:59:55 -08:00
Paul E. McKenney 7d0ae8086b rcu: Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE()
This commit moves from the old ACCESS_ONCE() API to the new READ_ONCE()
and WRITE_ONCE() APIs.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck:  Updated to include kernel/torture.c as suggested by Jason Low. ]
2015-05-27 12:56:15 -07:00
Paul E. McKenney 78e691f4ae Merge branches 'doc.2015.01.07a', 'fixes.2015.01.15a', 'preempt.2015.01.06a', 'srcu.2015.01.06a', 'stall.2015.01.16a' and 'torture.2015.01.11a' into HEAD
doc.2015.01.07a: Documentation updates.
fixes.2015.01.15a: Miscellaneous fixes.
preempt.2015.01.06a: Changes to handling of lists of preempted tasks.
srcu.2015.01.06a: SRCU updates.
stall.2015.01.16a: RCU CPU stall-warning updates and fixes.
torture.2015.01.11a: RCU torture-test updates and fixes.
2015-01-15 23:34:34 -08:00
Miroslav Benes ec1fe396ff rcu: Fix RCU CPU stall detection in tiny implementation
The tiny RCU CPU stall detection depends on *rcp->curtail not being
NULL. It is however a tail pointer and thus NULL by definition. Instead we
should check rcp->rcucblist for the presence of pending callbacks which
need to be processed. With this fix INFO about the stall is printed and
jiffies_stall (jiffies at next stall) correctly updated.

Note that the check for pending callback is necessary to avoid spurious
warnings if there are no pendings callbacks.

Signed-off-by: Miroslav Benes <mbenes@suse.cz>
[ paulmck: Fused identical "if" statements, ported to -rcu. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-15 23:33:16 -08:00
Lai Jiangshan 5f6130fa52 tiny_rcu: Directly force QS when call_rcu_[bh|sched]() on idle_task
For RCU in UP, context-switch = QS = GP, thus we can force a
context-switch when any call_rcu_[bh|sched]() is happened on idle_task.
After doing so, rcu_idle/irq_enter/exit() are useless, so we can simply
make these functions empty.

More important, this change does not change the functionality logically.
Note: raise_softirq(RCU_SOFTIRQ)/rcu_sched_qs() in rcu_idle_enter() and
outmost rcu_irq_exit() will have to wake up the ksoftirqd
(due to in_interrupt() == 0).

Before this patch		After this patch:
call_rcu_sched() in idle;	call_rcu_sched() in idle
				  set resched
do other stuffs;		do other stuffs
outmost rcu_irq_exit()		outmost rcu_irq_exit() (empty function)
  (or rcu_idle_enter())		  (or rcu_idle_enter(), also empty function)
				start to resched. (see above)
  rcu_sched_qs()		rcu_sched_qs()
    QS,and GP and advance cb	  QS,and GP and advance cb
    wake up the ksoftirqd	    wake up the ksoftirqd
      set resched
resched to ksoftirqd (or other)	resched to ksoftirqd (or other)

These two code patches are almost the same.

Size changed after patched:

size kernel/rcu/tiny-old.o kernel/rcu/tiny-patched.o
   text	   data	    bss	    dec	    hex	filename
   3449	    206	      8	   3663	    e4f	kernel/rcu/tiny-old.o
   2406	    144	      8	   2558	    9fe	kernel/rcu/tiny-patched.o

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-06 11:01:12 -08:00
Himangi Saraogi af952b919b rcu: Protect uses of ->jiffies_stall with ACCESS_ONCE()
Some of the accesses to the rcu_state structure's ->jiffies_stall
field are unprotected. This patch protects them with ACCESS_ONCE().
The following coccinelle script was used to acheive this:
/* coccinelle script to protect uses of ->jiffies_stall with ACCESS_ONCE() */
@@
identifier a;
@@
(
	ACCESS_ONCE(a->jiffies_stall)
|
-	a->jiffies_stall
+	ACCESS_ONCE(a->jiffies_stall)
)

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-04-29 08:44:41 -07:00
Paul E. McKenney 87de1cfdc5 rcu: Stop tracking FSF's postal address
All of the RCU source files have the usual GPL header, which contains a
long-obsolete postal address for FSF.  To avoid the need to track the
FSF office's movements, this commit substitutes the URL where GPL may
be found.

Reported-by: Greg KH <gregkh@linuxfoundation.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-02-17 15:01:37 -08:00
Paul E. McKenney 4102adab91 rcu: Move RCU-related source code to kernel/rcu directory
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
2013-10-15 12:53:31 -07:00