When a timer is enqueued we try to forward the timer base clock. This
mechanism has two issues:
1) Forwarding a remote base unlocked
The forwarding function is called from get_target_base() with the current
timer base lock held. But if the new target base is a different base than
the current base (can happen with NOHZ, sigh!) then the forwarding is done
on an unlocked base. This can lead to corruption of base->clk.
Solution is simple: Invoke the forwarding after the target base is locked.
2) Possible corruption due to jiffies advancing
This is similar to the issue in get_net_timer_interrupt() which was fixed
in the previous patch. jiffies can advance between check and assignement
and therefore advancing base->clk beyond the next expiry value.
So we need to read jiffies into a local variable once and do the checks and
assignment with the local copy.
Fixes: a683f390b93f("timers: Forward the wheel clock whenever possible")
Reported-by: Ashton Holmes <scoopta@gmail.com>
Reported-by: Michael Thayer <michael.thayer@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michal Necasek <michal.necasek@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: knut.osmundsen@oracle.com
Cc: stable@vger.kernel.org
Cc: stern@rowland.harvard.edu
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20161022110552.253640125@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ashton and Michael reported, that kernel versions 4.8 and later suffer from
USB timeouts which are caused by the timer wheel rework.
This is caused by a bug in the base clock forwarding mechanism, which leads
to timers expiring early. The scenario which leads to this is:
run_timers()
while (jiffies >= base->clk) {
collect_expired_timers();
base->clk++;
expire_timers();
}
So base->clk = jiffies + 1. Now the cpu goes idle:
idle()
get_next_timer_interrupt()
nextevt = __next_time_interrupt();
if (time_after(nextevt, base->clk))
base->clk = jiffies;
jiffies has not advanced since run_timers(), so this assignment effectively
decrements base->clk by one.
base->clk is the index into the timer wheel arrays. So let's assume the
following state after the base->clk increment in run_timers():
jiffies = 0
base->clk = 1
A timer gets enqueued with an expiry delta of 63 ticks (which is the case
with the USB timeout and HZ=250) so the resulting bucket index is:
base->clk + delta = 1 + 63 = 64
The timer goes into the first wheel level. The array size is 64 so it ends
up in bucket 0, which is correct as it takes 63 ticks to advance base->clk
to index into bucket 0 again.
If the cpu goes idle before jiffies advance, then the bug in the forwarding
mechanism sets base->clk back to 0, so the next invocation of run_timers()
at the next tick will index into bucket 0 and therefore expire the timer 62
ticks too early.
Instead of blindly setting base->clk to jiffies we must make the forwarding
conditional on jiffies > base->clk, but we cannot use jiffies for this as
we might run into the following issue:
if (time_after(jiffies, base->clk) {
if (time_after(nextevt, base->clk))
base->clk = jiffies;
jiffies can increment between the check and the assigment far enough to
advance beyond nextevt. So we need to use a stable value for checking.
get_next_timer_interrupt() has the basej argument which is the jiffies
value snapshot taken in the calling code. So we can just that.
Thanks to Ashton for bisecting and providing trace data!
Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Reported-by: Ashton Holmes <scoopta@gmail.com>
Reported-by: Michael Thayer <michael.thayer@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michal Necasek <michal.necasek@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: knut.osmundsen@oracle.com
Cc: stable@vger.kernel.org
Cc: stern@rowland.harvard.edu
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20161022110552.175308322@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Linus stumbled over the unlocked modification of the timer expiry value in
mod_timer() which is an optimization for timers which stay in the same
bucket - due to the bucket granularity - despite their expiry time getting
updated.
The optimization itself still makes sense even if we take the lock, because
in case that the bucket stays the same, we avoid the pointless
queue/enqueue dance.
Make the check and the modification of timer->expires protected by the base
lock and shuffle the remaining code around so we can keep the lock held
when we actually have to requeue the timer to a different bucket.
Fixes: f00c0afdfa ("timers: Implement optimization for same expiry time in mod_timer()")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1610241711220.4983@nanos
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Linus noticed that lock_timer_base() lacks a READ_ONCE() for accessing the
timer flags. As a consequence the compiler is allowed to reload the flags
between the initial check for TIMER_MIGRATION and the following timer base
computation and the spin lock of the base.
While this has not been observed (yet), we need to make sure that it never
happens.
Fixes: 0eeda71bc3 ("timer: Replace timer base by a cpu index")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1610241711220.4983@nanos
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Remove the set but unused variable base in alarm_clock_get to fix the
following warning when building with 'W=1':
kernel/time/alarmtimer.c: In function ‘alarm_timer_create’:
kernel/time/alarmtimer.c:545:21: warning: variable ‘base’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20161017094702.10873-1-tklauser@distanz.ch
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
extract as much possible uncertainty from a running system at boot time as
possible, hoping to capitalize on any possible variation in CPU operation
(due to runtime data differences, hardware differences, SMP ordering,
thermal timing variation, cache behavior, etc).
At the very least, this plugin is a much more comprehensive example for
how to manipulate kernel code using the gcc plugin internals.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>
iQIcBAABCgAGBQJX/BAFAAoJEIly9N/cbcAmzW8QALFbCs7EFFkML+M/M/9d8zEk
1QbUs/z8covJTTT1PjSdw7JUrAMulI3S00owpcQVd/PcWjRPU80QwfsXBgIB0tvC
Kub2qxn6Oaf+kTB646zwjFgjdCecw/USJP+90nfcu2+LCnE8ReclKd1aUee+Bnhm
iDEUyH2ONIoWq6ta2Z9sA7+E4y2ZgOlmW0iga3Mnf+OcPtLE70fWPoe5E4g9DpYk
B+kiPDrD9ql5zsHaEnKG1ldjiAZ1L6Grk8rGgLEXmbOWtTOFmnUhR+raK5NA/RCw
MXNuyPay5aYPpqDHFm+OuaWQAiPWfPNWM3Ett4k0d9ZWLixTcD1z68AciExwk7aW
SEA8b1Jwbg05ZNYM7NJB6t6suKC4dGPxWzKFOhmBicsh2Ni5f+Az0BQL6q8/V8/4
8UEqDLuFlPJBB50A3z5ngCVeYJKZe8Bg/Swb4zXl6mIzZ9darLzXDEV6ystfPXxJ
e1AdBb41WC+O2SAI4l64yyeswkGo3Iw2oMbXG5jmFl6wY/xGp7dWxw7gfnhC6oOh
afOT54p2OUDfSAbJaO0IHliWoIdmE5ZYdVYVU9Ek+uWyaIwcXhNmqRg+Uqmo32jf
cP5J9x2kF3RdOcbSHXmFp++fU+wkhBtEcjkNpvkjpi4xyA47IWS7lrVBBebrCq9R
pa/A7CNQwibIV6YD8+/p
=1dUK
-----END PGP SIGNATURE-----
Merge tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull gcc plugins update from Kees Cook:
"This adds a new gcc plugin named "latent_entropy". It is designed to
extract as much possible uncertainty from a running system at boot
time as possible, hoping to capitalize on any possible variation in
CPU operation (due to runtime data differences, hardware differences,
SMP ordering, thermal timing variation, cache behavior, etc).
At the very least, this plugin is a much more comprehensive example
for how to manipulate kernel code using the gcc plugin internals"
* tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
latent_entropy: Mark functions with __latent_entropy
gcc-plugins: Add latent_entropy plugin
The __latent_entropy gcc attribute can be used only on functions and
variables. If it is on a function then the plugin will instrument it for
gathering control-flow entropy. If the attribute is on a variable then
the plugin will initialize it with random contents. The variable must
be an integer, an integer array type or a structure with integer fields.
These specific functions have been selected because they are init
functions (to help gather boot-time entropy), are called at unpredictable
times, or they have variable loops, each of which provide some level of
latent entropy.
Signed-off-by: Emese Revfy <re.emese@gmail.com>
[kees: expanded commit message]
Signed-off-by: Kees Cook <keescook@chromium.org>
can_stop_full_tick() has no check for offline cpus. So it allows to stop
the tick on an offline cpu from the interrupt return path, which is wrong
and subsequently makes irq_work_needs_cpu() warn about being called for an
offline cpu.
Commit f7ea0fd639 ("tick: Don't invoke tick_nohz_stop_sched_tick() if
the cpu is offline") added prevention for can_stop_idle_tick(), but forgot
to do the same in can_stop_full_tick(). Add it.
[ tglx: Massaged changelog ]
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1473245473-4463-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
tick_nohz_start_idle() is prevented to be called if the idle tick can't
be stopped since commit 1f3b0f8243 ("tick/nohz: Optimize nohz idle
enter"). As a result, after suspend/resume the host machine, full dynticks
kvm guest will softlockup:
NMI watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:0]
Call Trace:
default_idle+0x31/0x1a0
arch_cpu_idle+0xf/0x20
default_idle_call+0x2a/0x50
cpu_startup_entry+0x39b/0x4d0
rest_init+0x138/0x140
? rest_init+0x5/0x140
start_kernel+0x4c1/0x4ce
? set_init_arg+0x55/0x55
? early_idt_handler_array+0x120/0x120
x86_64_start_reservations+0x24/0x26
x86_64_start_kernel+0x142/0x14f
In addition, cat /proc/stat | grep cpu in guest or host:
cpu 398 16 5049 15754 5490 0 1 46 0 0
cpu0 206 5 450 0 0 0 1 14 0 0
cpu1 81 0 3937 3149 1514 0 0 9 0 0
cpu2 45 6 332 6052 2243 0 0 11 0 0
cpu3 65 2 328 6552 1732 0 0 11 0 0
The idle and iowait states are weird 0 for cpu0(housekeeping).
The bug is present in both guest and host kernels, and they both have
cpu0's idle and iowait states issue, however, host kernel's suspend/resume
path etc will touch watchdog to avoid the softlockup.
- The watchdog will not be touched in tick_nohz_stop_idle path (need be
touched since the scheduler stall is expected) if idle_active flags are
not detected.
- The idle and iowait states will not be accounted when exit idle loop
(resched or interrupt) if idle start time and idle_active flags are
not set.
This patch fixes it by reverting commit 1f3b0f8243 since can't stop
idle tick doesn't mean can't be idle.
Fixes: 1f3b0f8243 ("tick/nohz: Optimize nohz idle enter")
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Sanjeev Yadav<sanjeev.yadav@spreadtrum.com>
Cc: Gaurav Jindal<gaurav.jindal@spreadtrum.com>
Cc: stable@vger.kernel.org
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lkml.kernel.org/r/1472798303-4154-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
I ran into this:
================================================================================
UBSAN: Undefined behaviour in kernel/time/time.c:783:2
signed integer overflow:
5273 + 9223372036854771711 cannot be represented in type 'long int'
CPU: 0 PID: 17363 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #88
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org
04/01/2014
0000000000000000 ffff88011457f8f0 ffffffff82344f50 0000000041b58ab3
ffffffff84f98080 ffffffff82344ea4 ffff88011457f918 ffff88011457f8c8
ffff88011457f8e0 7fffffffffffefff ffff88011457f6d8 dffffc0000000000
Call Trace:
[<ffffffff82344f50>] dump_stack+0xac/0xfc
[<ffffffff82344ea4>] ? _atomic_dec_and_lock+0xc4/0xc4
[<ffffffff8242f4c8>] ubsan_epilogue+0xd/0x8a
[<ffffffff8242fc04>] handle_overflow+0x202/0x23d
[<ffffffff8242fa02>] ? val_to_string.constprop.6+0x11e/0x11e
[<ffffffff823c7837>] ? debug_smp_processor_id+0x17/0x20
[<ffffffff8131b581>] ? __sigqueue_free.part.13+0x51/0x70
[<ffffffff8146d4e0>] ? rcu_is_watching+0x110/0x110
[<ffffffff8242fc4d>] __ubsan_handle_add_overflow+0xe/0x10
[<ffffffff81476ef8>] timespec64_add_safe+0x298/0x340
[<ffffffff81476c60>] ? timespec_add_safe+0x330/0x330
[<ffffffff812f7990>] ? wait_noreap_copyout+0x1d0/0x1d0
[<ffffffff8184bf18>] poll_select_set_timeout+0xf8/0x170
[<ffffffff8184be20>] ? poll_schedule_timeout+0x2b0/0x2b0
[<ffffffff813aa9bb>] ? __might_sleep+0x5b/0x260
[<ffffffff833c8a87>] __sys_recvmmsg+0x107/0x790
[<ffffffff833c8980>] ? SyS_recvmsg+0x20/0x20
[<ffffffff81486378>] ? hrtimer_start_range_ns+0x3b8/0x1380
[<ffffffff845f8bfb>] ? _raw_spin_unlock_irqrestore+0x3b/0x60
[<ffffffff8148bcea>] ? do_setitimer+0x39a/0x8e0
[<ffffffff813aa9bb>] ? __might_sleep+0x5b/0x260
[<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790
[<ffffffff833c91e9>] SyS_recvmmsg+0xd9/0x160
[<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790
[<ffffffff823c7853>] ? __this_cpu_preempt_check+0x13/0x20
[<ffffffff8162f680>] ? __context_tracking_exit.part.3+0x30/0x1b0
[<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790
[<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0
[<ffffffff845f936a>] entry_SYSCALL64_slow_path+0x25/0x25
================================================================================
Line 783 is this:
783 set_normalized_timespec64(&res, lhs.tv_sec + rhs.tv_sec,
784 lhs.tv_nsec + rhs.tv_nsec);
In other words, since lhs.tv_sec and rhs.tv_sec are both time64_t, this
is a signed addition which will cause undefined behaviour on overflow.
Note that this is not currently a huge concern since the kernel should be
built with -fno-strict-overflow by default, but could be a problem in the
future, a problem with older compilers, or other compilers than gcc.
The easiest way to avoid the overflow is to cast one of the arguments to
unsigned (so the addition will be done using unsigned arithmetic).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
In addition to keeping a histogram of suspend times, also
print out the time spent in suspend to dmesg.
This helps to keep track of suspend time while debugging using
kernel logs.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
[jstultz: Tweaked commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Clocksources don't get the VALID_FOR_HRES flag until they have been
checked by a watchdog. However, when using an override, the
clocksource_select logic will clear the override value if the
clocksource is not marked VALID_FOR_HRES during that inititial check.
When using the boot arguments clocksource=<foo>, this selection can
run before the watchdog, and can cause the override to be incorrectly
cleared.
To address this condition, the override_name is only invalidated for
unstable clocksources. Otherwise, the override is left intact until after
the watchdog has validated the clocksource as stable/unstable.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Kyle Walker <kwalker@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
It was reported that hibernation could fail on the 2nd attempt, where the
system hangs at hibernate() -> syscore_resume() -> i8237A_resume() ->
claim_dma_lock(), because the lock has already been taken.
However there is actually no other process would like to grab this lock on
that problematic platform.
Further investigation showed that the problem is triggered by setting
/sys/power/pm_trace to 1 before the 1st hibernation.
Since once pm_trace is enabled, the rtc becomes unmeaningful after suspend,
and meanwhile some BIOSes would like to adjust the 'invalid' RTC (e.g, smaller
than 1970) to the release date of that motherboard during POST stage, thus
after resumed, it may seem that the system had a significant long sleep time
which is a completely meaningless value.
Then in timekeeping_resume -> tk_debug_account_sleep_time, if the bit31 of the
sleep time happened to be set to 1, fls() returns 32 and we add 1 to
sleep_time_bin[32], which causes an out of bounds array access and therefor
memory being overwritten.
As depicted by System.map:
0xffffffff81c9d080 b sleep_time_bin
0xffffffff81c9d100 B dma_spin_lock
the dma_spin_lock.val is set to 1, which caused this problem.
This patch adds a sanity check in tk_debug_account_sleep_time()
to ensure we don't index past the sleep_time_bin array.
[jstultz: Problem diagnosed and original patch by Chen Yu, I've solved the
issue slightly differently, but borrowed his excelent explanation of the
issue here.]
Fixes: 5c83545f24 "power: Add option to log time spent in suspend"
Reported-by: Janek Kozicki <cosurgi@gmail.com>
Reported-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xunlei Pang <xpang@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: stable <stable@vger.kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/1471993702-29148-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When I added some extra sanity checking in timekeeping_get_ns() under
CONFIG_DEBUG_TIMEKEEPING, I missed that the NMI safe __ktime_get_fast_ns()
method was using timekeeping_get_ns().
Thus the locking added to the debug checks broke the NMI-safety of
__ktime_get_fast_ns().
This patch open-codes the timekeeping_get_ns() logic for
__ktime_get_fast_ns(), so can avoid any deadlocks in NMI.
Fixes: 4ca22c2648 "timekeeping: Add warnings when overflows or underflows are observed"
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1471993702-29148-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The tick_nohz_stop_sched_tick() routine is not properly
canceling the sched timer when nothing is pending, because
get_next_timer_interrupt() is no longer returning KTIME_MAX in
that case. This causes periodic interrupts when none are needed.
When determining the next interrupt time, we first use
__next_timer_interrupt() to get the first expiring timer in the
timer wheel. If no timer is found, we return the base clock value
plus NEXT_TIMER_MAX_DELTA to indicate there is no timer in the
timer wheel.
Back in get_next_timer_interrupt(), we set the "expires" value
by converting the timer wheel expiry (in ticks) to a nsec value.
But we don't want to do this if the timer wheel expiry value
indicates no timer; we want to return KTIME_MAX.
Prior to commit 500462a9de ("timers: Switch to a non-cascading
wheel") we checked base->active_timers to see if any timers
were active, and if not, we didn't touch the expiry value and so
properly returned KTIME_MAX. Now we don't have active_timers.
To fix this, we now just check the timer wheel expiry value to
see if it is "now + NEXT_TIMER_MAX_DELTA", and if it is, we don't
try to compute a new value based on it, but instead simply let the
KTIME_MAX value in expires remain.
Fixes: 500462a9de "timers: Switch to a non-cascading wheel"
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/1470688147-22287-1-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull smp hotplug updates from Thomas Gleixner:
"This is the next part of the hotplug rework.
- Convert all notifiers with a priority assigned
- Convert all CPU_STARTING/DYING notifiers
The final removal of the STARTING/DYING infrastructure will happen
when the merge window closes.
Another 700 hundred line of unpenetrable maze gone :)"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
timers/core: Correct callback order during CPU hot plug
leds/trigger/cpu: Move from CPU_STARTING to ONLINE level
powerpc/numa: Convert to hotplug state machine
arm/perf: Fix hotplug state machine conversion
irqchip/armada: Avoid unused function warnings
ARC/time: Convert to hotplug state machine
clocksource/atlas7: Convert to hotplug state machine
clocksource/armada-370-xp: Convert to hotplug state machine
clocksource/exynos_mct: Convert to hotplug state machine
clocksource/arm_global_timer: Convert to hotplug state machine
rcu: Convert rcutree to hotplug state machine
KVM/arm/arm64/vgic-new: Convert to hotplug state machine
smp/cfd: Convert core to hotplug state machine
x86/x2apic: Convert to CPU hotplug state machine
profile: Convert to hotplug state machine
timers/core: Convert to hotplug state machine
hrtimer: Convert to hotplug state machine
x86/tboot: Convert to hotplug state machine
arm64/armv8 deprecated: Convert to hotplug state machine
hwtracing/coresight-etm4x: Convert to hotplug state machine
...
Pull timer updates from Thomas Gleixner:
"This update provides the following changes:
- The rework of the timer wheel which addresses the shortcomings of
the current wheel (cascading, slow search for next expiring timer,
etc). That's the first major change of the wheel in almost 20
years since Finn implemted it.
- A large overhaul of the clocksource drivers init functions to
consolidate the Device Tree initialization
- Some more Y2038 updates
- A capability fix for timerfd
- Yet another clock chip driver
- The usual pile of updates, comment improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits)
tick/nohz: Optimize nohz idle enter
clockevents: Make clockevents_subsys static
clocksource/drivers/time-armada-370-xp: Fix return value check
timers: Implement optimization for same expiry time in mod_timer()
timers: Split out index calculation
timers: Only wake softirq if necessary
timers: Forward the wheel clock whenever possible
timers/nohz: Remove pointless tick_nohz_kick_tick() function
timers: Optimize collect_expired_timers() for NOHZ
timers: Move __run_timers() function
timers: Remove set_timer_slack() leftovers
timers: Switch to a non-cascading wheel
timers: Reduce the CPU index space to 256k
timers: Give a few structs and members proper names
hlist: Add hlist_is_singular_node() helper
signals: Use hrtimer for sigtimedwait()
timers: Remove the deprecated mod_timer_pinned() API
timers, net/ipv4/inet: Initialize connection request timers as pinned
timers, drivers/tty/mips_ejtag: Initialize the poll timer as pinned
timers, drivers/tty/metag_da: Initialize the poll timer as pinned
...
Here is the big Staging and IIO driver update for 4.8-rc1.
We ended up adding more code than removing, again, but it's not all that
bad. Lots of cleanups all over the staging tree, and new IIO drivers,
full details in the shortlog.
All of these have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iFYEABECABYFAleVPQQPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfsplRgAniG6
jfPnvlHhl70T5HsGJzrc7VS9AKCBQ5x0gzTNxo2nnGfPmR8CVEH7Bg==
=0/6X
-----END PGP SIGNATURE-----
Merge tag 'staging-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver updates from Greg KH:
"Here is the big Staging and IIO driver update for 4.8-rc1.
We ended up adding more code than removing, again, but it's not all
that bad. Lots of cleanups all over the staging tree, and new IIO
drivers, full details in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (417 commits)
drivers:iio:accel:mma8452: removed unwanted return statements
drivers:iio:accel:mma8452: added cleanup provision in case of failure.
iio: Add iio.git tree to MAINTAINERS
iio:st_pressure: clean useless static channel initializers
iio:st_pressure:lps22hb: temperature support
iio:st_pressure:lps22hb: open drain support
iio:st_pressure: temperature triggered buffering
iio:st_pressure: document sampling gains
iio:st_pressure: align storagebits on power of 2
iio:st_sensors: align on storagebits boundaries
staging:iio:lis3l02dq drop separate driver
iio: accel: st_accel: Add lis3l02dq support
iio: adc: add missing of_node references to iio_dev
iio: adc: ti-ads1015: add indio_dev->dev.of_node reference
iio: potentiometer: Fix typo in Kconfig
iio: potentiometer: mcp4531: Add device tree binding
iio: potentiometer: mcp4531: Add device tree binding documentation
iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x
iio:imu:mpu6050: icm20608 initial support
iio: adc: max1363: Add device tree binding
...
tick_nohz_start_idle is called before checking whether the idle tick can be
stopped. If the tick cannot be stopped, calling tick_nohz_start_idle() is
pointless and just wasting CPU cycles.
Only invoke tick_nohz_start_idle() when can_stop_idle_tick() returns true. A
short one minute observation of the effect on ARM64 shows a reduction of calls
by 1.5% thus optimizing the idle entry sequence.
[tglx: Massaged changelog ]
Co-developed-by: Sanjeev Yadav<sanjeev.yadav@spreadtrum.com>
Signed-off-by: Gaurav Jindal<gaurav.jindal@spreadtrum.com>
Link: http://lkml.kernel.org/r/20160714120416.GB21099@gaurav.jindal@spreadtrum.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The clockevents_subsys struct is used for sysfs support and
is not declared or used outside the file it is defined in.
Fix the following warning by making it static:
kernel/time/clockevents.c:648:17: warning: symbol 'clockevents_subsys' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: linux-kernel@lists.codethink.co.uk
Link: http://lkml.kernel.org/r/1466178974-7105-1-git-send-email-ben.dooks@codethink.co.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When tearing down, call timers_dead_cpu() before notify_dead().
There is a hidden dependency between:
- timers
- block multiqueue
- rcutree
If timers_dead_cpu() comes later than blk_mq_queue_reinit_notify()
that latter function causes a RCU stall.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153337.566790058@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Split out the clockevents callbacks instead of piggybacking them on
hrtimers.
This gets rid of a POST_DEAD user. See commit:
54e88fad22 ("sched: Make sure timers have migrated before killing the migration_thread")
We just move the callback state to the proper place in the state machine.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153337.485419196@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Variable "now" seems to be genuinely used unintialized
if branch
if (CPUCLOCK_PERTHREAD(timer->it_clock)) {
is not taken and branch
if (unlikely(sighand == NULL)) {
is taken. In this case the process has been reaped and the timer is marked as
disarmed anyway. So none of the postprocessing of the sample is
required. Return right away.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20160707223911.GA26483@p183.telecom.by
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The existing optimization for same expiry time in mod_timer() checks whether
the timer expiry time is the same as the new requested expiry time. In the old
timer wheel implementation this does not take the slack batching into account,
neither does the new implementation evaluate whether the new expiry time will
requeue the timer to the same bucket.
To optimize that, we can calculate the resulting bucket and check if the new
expiry time is different from the current expiry time. This calculation
happens outside the base lock held region. If the resulting bucket is the same
we can avoid taking the base lock and requeueing the timer.
If the timer needs to be requeued then we have to check under the base lock
whether the base time has changed between the lockless calculation and taking
the lock. If it has changed we need to recalculate under the lock.
This optimization takes effect for timers which are enqueued into the less
granular wheel levels (1 and above). With a simple test case the functionality
has been verified:
Before After
Match: 5.5% 86.6%
Requeue: 94.5% 13.4%
Recalc: <0.01%
In the non optimized case the timer is requeued in 94.5% of the cases. With
the index optimization in place the requeue rate drops to 13.4%. The case
where the lockless index calculation has to be redone is less than 0.01%.
With a real world test case (networking) we observed the following changes:
Before After
Match: 97.8% 99.7%
Requeue: 2.2% 0.3%
Recalc: <0.001%
That means two percent fewer lock/requeue/unlock operations done in one of
the hot path use cases of timers.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.778527749@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For further optimizations we need to seperate index calculation
from queueing. No functional change.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.691159619@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With the wheel forwading in place and with the HZ=1000 4ms folding we can
avoid running the softirq at all.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.607650550@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The wheel clock is stale when a CPU goes into a long idle sleep. This has the
side effect that timers which are queued end up in the outer wheel levels.
That results in coarser granularity.
To solve this, we keep track of the idle state and forward the wheel clock
whenever possible.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.512039360@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This was a failed attempt to optimize the timer expiry in idle, which was
disabled and never revisited. Remove the cruft.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.431073782@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After a NOHZ idle sleep the timer wheel must be forwarded to current jiffies.
There might be expired timers so the current code loops and checks the expired
buckets for timers. This can take quite some time for long NOHZ idle periods.
The pending bitmask in the timer base allows us to do a quick search for the
next expiring timer and therefore a fast forward of the base time which
prevents pointless long lasting loops.
For a 3 seconds idle sleep this reduces the catchup time from ~1ms to 5us.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.351296290@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move __run_timers() below __next_timer_interrupt() and next_pending_bucket()
in preparation for __run_timers() NOHZ optimization.
No functional change.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.271872665@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We now have implicit batching in the timer wheel. The slack API is no longer
used, so remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.189813118@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current timer wheel has some drawbacks:
1) Cascading:
Cascading can be an unbound operation and is completely pointless in most
cases because the vast majority of the timer wheel timers are canceled or
rearmed before expiration. (They are used as timeout safeguards, not as
real timers to measure time.)
2) No fast lookup of the next expiring timer:
In NOHZ scenarios the first timer soft interrupt after a long NOHZ period
must fast forward the base time to the current value of jiffies. As we
have no way to find the next expiring timer fast, the code loops linearly
and increments the base time one by one and checks for expired timers
in each step. This causes unbound overhead spikes exactly in the moment
when we should wake up as fast as possible.
After a thorough analysis of real world data gathered on laptops,
workstations, webservers and other machines (thanks Chris!) I came to the
conclusion that the current 'classic' timer wheel implementation can be
modified to address the above issues.
The vast majority of timer wheel timers is canceled or rearmed before
expiry. Most of them are timeouts for networking and other I/O tasks. The
nature of timeouts is to catch the exception from normal operation (TCP ack
timed out, disk does not respond, etc.). For these kinds of timeouts the
accuracy of the timeout is not really a concern. Timeouts are very often
approximate worst-case values and in case the timeout fires, we already
waited for a long time and performance is down the drain already.
The few timers which actually expire can be split into two categories:
1) Short expiry times which expect halfways accurate expiry
2) Long term expiry times are inaccurate today already due to the
batching which is done for NOHZ automatically and also via the
set_timer_slack() API.
So for long term expiry timers we can avoid the cascading property and just
leave them in the less granular outer wheels until expiry or
cancelation. Timers which are armed with a timeout larger than the wheel
capacity are no longer cascaded. We expire them with the longest possible
timeout (6+ days). We have not observed such timeouts in our data collection,
but at least we handle them, applying the rule of the least surprise.
To avoid extending the wheel levels for HZ=1000 so we can accomodate the
longest observed timeouts (5 days in the network conntrack code) we reduce the
first level granularity on HZ=1000 to 4ms, which effectively is the same as
the HZ=250 behaviour. From our data analysis there is nothing which relies on
that 1ms granularity and as a side effect we get better batching and timer
locality for the networking code as well.
Contrary to the classic wheel the granularity of the next wheel is not the
capacity of the first wheel. The granularities of the wheels are in the
currently chosen setting 8 times the granularity of the previous wheel.
So for HZ=250 we end up with the following granularity levels:
Level Offset Granularity Range
0 0 4 ms 0 ms - 252 ms
1 64 32 ms 256 ms - 2044 ms (256ms - ~2s)
2 128 256 ms 2048 ms - 16380 ms (~2s - ~16s)
3 192 2048 ms (~2s) 16384 ms - 131068 ms (~16s - ~2m)
4 256 16384 ms (~16s) 131072 ms - 1048572 ms (~2m - ~17m)
5 320 131072 ms (~2m) 1048576 ms - 8388604 ms (~17m - ~2h)
6 384 1048576 ms (~17m) 8388608 ms - 67108863 ms (~2h - ~18h)
7 448 8388608 ms (~2h) 67108864 ms - 536870911 ms (~18h - ~6d)
That's a worst case inaccuracy of 12.5% for the timers which are queued at the
beginning of a level.
So the new wheel concept addresses the old issues:
1) Cascading is avoided completely
2) By keeping the timers in the bucket until expiry/cancelation we can track
the buckets which have timers enqueued in a bucket bitmap and therefore can
look up the next expiring timer very fast and O(1).
A further benefit of the concept is that the slack calculation which is done
on every timer start is no longer necessary because the granularity levels
provide natural batching already.
Our extensive testing with various loads did not show any performance
degradation vs. the current wheel implementation.
This patch does not address the 'fast lookup' issue as we wanted to make sure
that there is no regression introduced by the wheel redesign. The
optimizations are in follow up patches.
This patch contains fixes from Anna-Maria Gleixner and Richard Cochran.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.108621834@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some of the names in the internal implementation of the timer code
are not longer correct and others are simply too long to type.
Clean it up before we switch the wheel implementation over to
the new scheme.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094341.948752516@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We switched all users to initialize the timers as pinned and call
mod_timer(). Remove the now unused timer API function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094341.706205231@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We want to move the timer migration logic from a 'push' to a 'pull' model.
Under the current 'push' model pinned timers are handled via
a runtime API variant: mod_timer_pinned().
The 'pull' model requires us to store the pinned attribute of a timer
in the timer_list structure itself, as a new TIMER_PINNED bit in
timer->flags.
This flag must be set at initialization time and the timer APIs
recognize the flag.
This patch:
- Implements the new flag and associated new-style initialization
methods
- makes mod_timer() recognize new-style pinned timers,
- and adds some migration helper facility to allow
step by step conversion of old-style to new-style
pinned timers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094341.049338558@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While reviewing another patch I noticed that kernel/time/tick-sched.c
had a charmingly (confusingly, annoyingly) rich set of variants for
spelling 'CPU':
cpu
cpus
CPU
CPUs
per CPU
per-CPU
per cpu
... sometimes these were mixed even within the same comment block!
Compress these variants down to a single consistent set of:
CPU
CPUs
per-CPU
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
EXPORT_SYMBOL() get_monotonic_coarse64 for new IIO timestamping clock
selection usage. This provides user apps the ability to request a
particular IIO device to timestamp samples using a monotonic coarse clock
granularity.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Pull time(keeping) updates from John Stultz:
- Handle the 1ns issue with the old refusing to die vsyscall machinery
- More y2038 updates
- Documentation fixes
- Simplify clocksource handling
The tstats_show() function prints a ktime_t variable by converting
it to struct timespec first. The algorithm is ok, but we want to
stop using timespec in general because of the 32-bit time_t
overflow problem.
This changes the code to use struct timespec64, without any
functional change.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
udelay_test_single() uses ktime_get_ts() to get two timespec values
and calculate the difference between them, while udelay_test_show()
uses the same to printk() the current monotonic time.
Both of these are y2038 safe on all machines, but we want to
get rid of struct timespec anyway, so this converts the code to
use ktime_get_ns() and ktime_get_ts64() respectively.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
time_to_tm() takes time_t as an argument.
time_t is not y2038 safe.
Add time64_to_tm() that takes time64_t as an argument
which is y2038 safe.
The plan is to eventually replace all calls to time_to_tm()
by time64_to_tm().
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The user notices the problem in a raw and real time drift, calling
clock_gettime with CLOCK_REALTIME / CLOCK_MONOTONIC_RAW on a system
with no ntp correction taking place (no ntpd or ptp stuff running).
The problem is, that old_vsyscall_fixup adds an extra 1ns even though
xtime_nsec is already held in full nsecs and the remainder in this
case is 0. Do the rounding up buisness only if needed.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Graziadei <thomas.graziadei@omicronenergy.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Thomas Gleixner