Pull networking updates from David Miller:
"Highlights:
1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.
2) Add fib_sync_mem to control the amount of dirty memory we allow to
queue up between synchronize RCU calls, from David Ahern.
3) Make flow classifier more lockless, from Vlad Buslov.
4) Add PHY downshift support to aquantia driver, from Heiner
Kallweit.
5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
contention on SLAB spinlocks in heavy RPC workloads.
6) Partial GSO offload support in XFRM, from Boris Pismenny.
7) Add fast link down support to ethtool, from Heiner Kallweit.
8) Use siphash for IP ID generator, from Eric Dumazet.
9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
entries, from David Ahern.
10) Move skb->xmit_more into a per-cpu variable, from Florian
Westphal.
11) Improve eBPF verifier speed and increase maximum program size,
from Alexei Starovoitov.
12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
spinlocks. From Neil Brown.
13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.
14) Improve link partner cap detection in generic PHY code, from
Heiner Kallweit.
15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
Maguire.
16) Remove SKB list implementation assumptions in SCTP, your's truly.
17) Various cleanups, optimizations, and simplifications in r8169
driver. From Heiner Kallweit.
18) Add memory accounting on TX and RX path of SCTP, from Xin Long.
19) Switch PHY drivers over to use dynamic featue detection, from
Heiner Kallweit.
20) Support flow steering without masking in dpaa2-eth, from Ioana
Ciocoi.
21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
Pirko.
22) Increase the strict parsing of current and future netlink
attributes, also export such policies to userspace. From Johannes
Berg.
23) Allow DSA tag drivers to be modular, from Andrew Lunn.
24) Remove legacy DSA probing support, also from Andrew Lunn.
25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
Haabendal.
26) Add a generic tracepoint for TX queue timeouts to ease debugging,
from Cong Wang.
27) More indirect call optimizations, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
cxgb4: Fix error path in cxgb4_init_module
net: phy: improve pause mode reporting in phy_print_status
dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
net: macb: Change interrupt and napi enable order in open
net: ll_temac: Improve error message on error IRQ
net/sched: remove block pointer from common offload structure
net: ethernet: support of_get_mac_address new ERR_PTR error
net: usb: smsc: fix warning reported by kbuild test robot
staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
net: dsa: support of_get_mac_address new ERR_PTR error
net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
vrf: sit mtu should not be updated when vrf netdev is the link
net: dsa: Fix error cleanup path in dsa_init_module
l2tp: Fix possible NULL pointer dereference
taprio: add null check on sched_nest to avoid potential null pointer dereference
net: mvpp2: cls: fix less than zero check on a u32 variable
net_sched: sch_fq: handle non connected flows
net_sched: sch_fq: do not assume EDT packets are ordered
net: hns3: use devm_kcalloc when allocating desc_cb
net: hns3: some cleanup for struct hns3_enet_ring
...
Pull perf updates from Ingo Molnar:
"The main kernel changes were:
- add support for Intel's "adaptive PEBS v4" - which embedds LBS data
in PEBS records and can thus batch up and reduce the IRQ (NMI) rate
significantly - reducing overhead and making call-graph profiling
less intrusive.
- add Intel CPU core and uncore support updates for Tremont, Icelake,
- extend the x86 PMU constraints scheduler with 'constraint ranges'
to better support Icelake hw constraints,
- make x86 call-chain support work better with CONFIG_FRAME_POINTER=y
- misc other changes
Tooling changes:
- updates to the main tools: 'perf record', 'perf trace', 'perf
stat'
- updated Intel and S/390 vendor events
- libtraceevent updates
- misc other updates and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER
watchdog: Fix typo in comment
perf/x86/intel: Add Tremont core PMU support
perf/x86/intel/uncore: Add Intel Icelake uncore support
perf/x86/msr: Add Icelake support
perf/x86/intel/rapl: Add Icelake support
perf/x86/intel/cstate: Add Icelake support
perf/x86/intel: Add Icelake support
perf/x86: Support constraint ranges
perf/x86/lbr: Avoid reading the LBRs when adaptive PEBS handles them
perf/x86/intel: Support adaptive PEBS v4
perf/x86/intel/ds: Extract code of event update in short period
perf/x86/intel: Extract memory code PEBS parser for reuse
perf/x86: Support outputting XMM registers
perf/x86/intel: Force resched when TFA sysctl is modified
perf/core: Add perf_pmu_resched() as global function
perf/headers: Fix stale comment for struct perf_addr_filter
perf/core: Make perf_swevent_init_cpu() static
perf/x86: Add sanity checks to x86_schedule_events()
perf/x86: Optimize x86_schedule_events()
...
The patches with fixes tags added a cast-to-void in the places when
the return value of a function was ignored.
This is not common practice in the kernel, and is therefore removed in
this patch.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 5750902a6e ("libbpf: proper XSKMAP cleanup")
Fixes: 0e6741f092 ("libbpf: fix invalid munmap call")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull perf fixes from Ingo Molnar:
"I'd like to apologize for this very late pull request: I was dithering
through the week whether to send the fixes, and then yesterday Jiri's
crash fix for a regression introduced in this cycle clearly marked
perf/urgent as 'must merge now'.
Most of the commits are tooling fixes, plus there's three kernel fixes
via four commits:
- race fix in the Intel PEBS code
- fix an AUX bug and roll back a previous attempt
- fix AMD family 17h generic HW cache-event perf counters
The largest diffstat contribution comes from the AMD fix - a new event
table is introduced, which is a fairly low risk change but has a large
linecount"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix race in intel_pmu_disable_event()
perf/x86/intel/pt: Remove software double buffering PMU capability
perf/ring_buffer: Fix AUX software double buffering
perf tools: Remove needless asm/unistd.h include fixing build in some places
tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscv
tools build: Add -ldl to the disassembler-four-args feature test
perf cs-etm: Always allocate memory for cs_etm_queue::prev_packet
perf cs-etm: Don't check cs_etm_queue::prev_packet validity
perf report: Report OOM in status line in the GTK UI
perf bench numa: Add define for RUSAGE_THREAD if not present
tools lib traceevent: Change tag string for error
perf annotate: Fix build on 32 bit for BPF annotation
tools uapi x86: Sync vmx.h with the kernel
perf bpf: Return value with unlocking in perf_env__find_btf()
MAINTAINERS: Include vendor specific files under arch/*/events/*
perf/x86/amd: Update generic hardware cache events for Family 17h
The libbpf_util.h is used by xsk.h, so add it to
the install headers.
Reported-by: Ben Pfaff <blp@ovn.org>
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When build perf for ARC recently, there was a build failure due to lack
of __NR_bpf.
| Auto-detecting system features:
|
| ... get_cpuid: [ OFF ]
| ... bpf: [ on ]
|
| # error __NR_bpf not defined. libbpf does not support your arch.
^~~~~
| bpf.c: In function 'sys_bpf':
| bpf.c:66:17: error: '__NR_bpf' undeclared (first use in this function)
| return syscall(__NR_bpf, cmd, attr, size);
| ^~~~~~~~
| sys_bpf
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_map_update_elem() function, when used on an XSKMAP, will fail
if not a valid AF_XDP socket is passed as value. Therefore, this is
function cannot be used to clear the XSKMAP. Instead, the
bpf_map_delete_elem() function should be used for that.
This patch also simplifies the code by breaking up
xsk_update_bpf_maps() into three smaller functions.
Reported-by: William Tu <u9012063@gmail.com>
Fixes: 1cad078842 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When unmapping the AF_XDP memory regions used for the rings, an
invalid address was passed to the munmap() calls. Instead of passing
the beginning of the memory region, the descriptor region was passed
to munmap.
When the userspace application tried to tear down an AF_XDP socket,
the operation failed and the application would still have a reference
to socket it wished to get rid of.
Reported-by: William Tu <u9012063@gmail.com>
Fixes: 1cad078842 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The traceevent lib is used by the perf tool, and when executing
perf test -v 6
it outputs error log on the ARM64 platform:
running test 33 '*:*'trace-cmd: No such file or directory
[...]
trace-cmd: Invalid argument
The trace event parsing code originally came from trace-cmd so it keeps
the tag string "trace-cmd" for errors, this easily introduces the
impression that the perf tool launches trace-cmd command for trace event
parsing, but in fact the related parsing is accomplished by the
traceevent lib.
This patch changes the tag string to "libtraceevent" so that we can
avoid confusion and let users to more easily connect the error with
traceevent lib.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20190424013802.27569-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-04-28
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Introduce BPF socket local storage map so that BPF programs can store
private data they associate with a socket (instead of e.g. separate hash
table), from Martin.
2) Add support for bpftool to dump BTF types. This is done through a new
`bpftool btf dump` sub-command, from Andrii.
3) Enable BPF-based flow dissector for skb-less eth_get_headlen() calls which
was currently not supported since skb was used to lookup netns, from Stanislav.
4) Add an opt-in interface for tracepoints to expose a writable context
for attached BPF programs, used here for NBD sockets, from Matt.
5) BPF xadd related arm64 JIT fixes and scalability improvements, from Daniel.
6) Change the skb->protocol for bpf_skb_adjust_room() helper in order to
support tunnels such as sit. Add selftests as well, from Willem.
7) Various smaller misc fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch supports probing for the new BPF_MAP_TYPE_SK_STORAGE.
BPF_MAP_TYPE_SK_STORAGE enforces BTF usage, so the new probe
requires to create and load a BTF also.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, and fixes up the
error: enumeration value ‘BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE’ not handled in switch [-Werror=switch-enum]
build errors it would otherwise cause in libbpf.
Signed-off-by: Matt Mullins <mmullins@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2019-04-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) the bpf verifier fix to properly mark registers in all stack frames, from Paul.
2) preempt_enable_no_resched->preempt_enable fix, from Peter.
3) other misc fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some binaries are generated when building libbpf from tools/lib/bpf/,
namely libbpf.so.0.0.2 and libbpf.so.0.
Add them to the local .gitignore.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, building bpf samples will cause the following error.
./tools/lib/bpf/bpf.h:132:27: error: 'UINT32_MAX' undeclared here (not in a function) ..
#define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */
^
./samples/bpf/bpf_load.h:31:25: note: in expansion of macro 'BPF_LOG_BUF_SIZE'
extern char bpf_log_buf[BPF_LOG_BUF_SIZE];
^~~~~~~~~~~~~~~~
Due to commit 4519efa6f8 ("libbpf: fix BPF_LOG_BUF_SIZE off-by-one error")
hard-coded size of BPF_LOG_BUF_SIZE has been replaced with UINT32_MAX which is
defined in <stdint.h> header.
Even with this change, bpf selftests are running fine since these are built
with clang and it includes header(-idirafter) from clang/6.0.0/include.
(it has <stdint.h>)
clang -I. -I./include/uapi -I../../../include/uapi -idirafter /usr/local/include -idirafter /usr/include \
-idirafter /usr/lib/llvm-6.0/lib/clang/6.0.0/include -idirafter /usr/include/x86_64-linux-gnu \
-Wno-compare-distinct-pointer-types -O2 -target bpf -emit-llvm -c progs/test_sysctl_prog.c -o - | \
llc -march=bpf -mcpu=generic -filetype=obj -o /linux/tools/testing/selftests/bpf/test_sysctl_prog.o
But bpf samples are compiled with GCC, and it only searches and includes
headers declared at the target file. As '#include <stdint.h>' hasn't been
declared in tools/lib/bpf/bpf.h, it causes build failure of bpf samples.
gcc -Wp,-MD,./samples/bpf/.sockex3_user.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes \
-O2 -fomit-frame-pointer -std=gnu89 -I./usr/include -I./tools/lib/ -I./tools/testing/selftests/bpf/ \
-I./tools/ lib/ -I./tools/include -I./tools/perf -c -o ./samples/bpf/sockex3_user.o ./samples/bpf/sockex3_user.c;
This commit add declaration of '#include <stdint.h>' to tools/lib/bpf/bpf.h
to fix this problem.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Ran into it while testing; in bpf_object__init_maps() data can be NULL
in the case where no map section is present. Therefore we simply cannot
access data->d_size before NULL test. Move the pr_debug() where it's
safe to access.
Fixes: d859900c4c ("bpf, libbpf: support global data/bss/rodata sections")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii reported a corner case where e.g. global static data is present
in the BPF ELF file in form of .data/.bss/.rodata section, but without
any relocations to it. Such programs could be loaded before commit
d859900c4c ("bpf, libbpf: support global data/bss/rodata sections"),
whereas afterwards if kernel lacks support then loading would fail.
Add a probing mechanism which skips setting up libbpf internal maps
in case of missing kernel support. In presence of relocation entries,
we abort the load attempt.
Fixes: d859900c4c ("bpf, libbpf: support global data/bss/rodata sections")
Reported-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Having a helpful compile time warning in libbpf_util.h is not a good
idea since all warnings are treated as errors. Change this into a
comment in the code instead.
Fixes: b7e3a28019 ("libbpf: remove dependency on barrier.h in xsk.h")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The full memory barrier in the XDP socket rings on the consumer side
between the load of the data and the store of the consumer ring is
there to protect the store from being executed before the load of the
data. If this was allowed to happen, the producer might overwrite the
data field with a new entry before the consumer got the chance to read
it.
On x86, stores are guaranteed not to be reordered with older loads, so
it does not need a full memory barrier here. A compile time barrier
would be enough. This patch introdcues a new primitive in
libbpf_util.h that implements a new barrier type (libbpf_smp_rwmb)
hindering stores to be reordered with older loads. It is then used in
the XDP socket ring access code in libbpf to improve performance.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The use of smp_rmb() and smp_wmb() creates a Linux header dependency
on barrier.h that is unnecessary in most parts. This patch implements
the two small defines that are needed from barrier.h. As a bonus, the
new implementations are faster than the default ones as they default
to sfence and lfence for x86, while we only need a compiler barrier in
our case. Just as it is when the same ring access code is compiled in
the kernel.
Fixes: 1cad078842 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch removes the use of likely and unlikely in xsk.h since they
create a dependency on Linux headers as reported by several
users. There have also been reports that the use of these decreases
performance as the compiler puts the code on two different cache lines
instead of on a single one. All in all, I think we are better off
without them.
Fixes: 1cad078842 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The ring buffer code of XDP sockets is missing a memory barrier on the
consumer side between the load of the data and the write that signals
that it is ok for the producer to put new data into the buffer. On
architectures that does not guarantee that stores are not reordered
with older loads, the producer might put data into the ring before the
consumer had the chance to read it. As IA does guarantee this
ordering, it would only need a compiler barrier here, but there are no
primitives in barrier.h for this specific case (hinder writes to be ordered
before older reads) so I had to add a smp_mb() here which will
translate into a run-time synch operation on IA.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Using %ld for printing out value of ptrdiff_t type is not portable
between 32-bit and 64-bit archs. This is causing compilation errors for
libbpf on 32-bit platform (discovered as part of an effort to integrate
libbpf into systemd ([0])). Proper formatter is %td, which is used in
this patch.
v2->v1:
- add Reported-by
- provide more context on how this issue was discovered
[0] https://github.com/systemd/systemd/pull/12151
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There was a missing comparison with 0 when checking if type is "s64" or
"u64". Therefore, the body of the if-statement was entered if "type" was
"u64" or not "s64", which made the first strcmp() redundant since if
type is "u64", it's not "s64".
If type is "s64", the body of the if-statement is not entered but since
the remainder of the function consists of if-statements which will not
be entered if type is "s64", we will just return "val", which is
correct, albeit at the cost of a few more calls to strcmp(), i.e., it
will behave just as if the if-statement was entered.
If type is neither "s64" or "u64", the body of the if-statement will be
entered incorrectly and "val" returned. This means that any type that is
checked after "s64" and "u64" is handled the same way as "s64" and
"u64", i.e., the limiting of "val" to fit in for example "s8" is never
reached.
This was introduced in the kernel tree when the sources were copied from
trace-cmd in commit f7d82350e5 ("tools/events: Add files to create
libtraceevent.a"), and in the trace-cmd repo in 1cdbae6035cei
("Implement typecasting in parser") when the function was introduced,
i.e., it has always behaved the wrong way.
Detected by cppcheck.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Fixes: f7d82350e5 ("tools/events: Add files to create libtraceevent.a")
Link: http://lkml.kernel.org/r/20190409091529.2686-1-rikard.falkeborn@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds support for VAR and DATASEC in btf_dedup(). VAR/DATASEC
are never deduplicated, but they need to be processed anyway as types
they refer to might need to be remapped due to deduplication and
compaction.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Yonghong Song <yhs@fb.com>
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Support BPF_PROG_TYPE_CGROUP_SYSCTL program in libbpf: identifying
program and attach types by section name, probe.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-04-12
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Improve BPF verifier scalability for large programs through two
optimizations: i) remove verifier states that are not useful in pruning,
ii) stop walking parentage chain once first LIVE_READ is seen. Combined
gives approx 20x speedup. Increase limits for accepting large programs
under root, and add various stress tests, from Alexei.
2) Implement global data support in BPF. This enables static global variables
for .data, .rodata and .bss sections to be properly handled which allows
for more natural program development. This also opens up the possibility
to optimize program workflow by compiling ELFs only once and later only
rewriting section data before reload, from Daniel and with test cases and
libbpf refactoring from Joe.
3) Add config option to generate BTF type info for vmlinux as part of the
kernel build process. DWARF debug info is converted via pahole to BTF.
Latter relies on libbpf and makes use of BTF deduplication algorithm which
results in 100x savings compared to DWARF data. Resulting .BTF section is
typically about 2MB in size, from Andrii.
4) Add BPF verifier support for stack access with variable offset from
helpers and add various test cases along with it, from Andrey.
5) Extend bpf_skb_adjust_room() growth BPF helper to mark inner MAC header
so that L2 encapsulation can be used for tc tunnels, from Alan.
6) Add support for input __sk_buff context in BPF_PROG_TEST_RUN so that
users can define a subset of allowed __sk_buff fields that get fed into
the test program, from Stanislav.
7) Add bpf fs multi-dimensional array tests for BTF test suite and fix up
various UBSAN warnings in bpftool, from Yonghong.
8) Generate a pkg-config file for libbpf, from Luca.
9) Dump program's BTF id in bpftool, from Prashant.
10) libbpf fix to use smaller BPF log buffer size for AF_XDP's XDP
program, from Magnus.
11) kallsyms related fixes for the case when symbols are not present in
BPF selftests and samples, from Daniel
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Support recently introduced input/output context for test runs.
We extend only bpf_prog_test_run_xattr. bpf_prog_test_run is
unextendable and left as is.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reported in [1].
With gcc 8.3.0 the following error is issued:
cc -Ibpf@sta -I. -I.. -I.././include -I.././include/uapi
-fdiagnostics-color=always -fsanitize=address,undefined -fno-omit-frame-pointer
-pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Werror -g -fPIC -g -O2
-Werror -Wall -Wno-pointer-arith -Wno-sign-compare -MD -MQ
'bpf@sta/src_libbpf.c.o' -MF 'bpf@sta/src_libbpf.c.o.d' -o
'bpf@sta/src_libbpf.c.o' -c ../src/libbpf.c
../src/libbpf.c: In function 'bpf_object__elf_collect':
../src/libbpf.c:947:18: error: 'map_def_sz' may be used uninitialized in this
function [-Werror=maybe-uninitialized]
if (map_def_sz <= sizeof(struct bpf_map_def)) {
~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/libbpf.c:827:18: note: 'map_def_sz' was declared here
int i, map_idx, map_def_sz, nr_syms, nr_maps = 0, nr_maps_glob = 0;
^~~~~~~~~~
According to [2] -Wmaybe-uninitialized is enabled by -Wall.
Same error is generated by clang's -Wconditional-uninitialized.
[1] https://github.com/libbpf/libbpf/pull/29#issuecomment-481902601
[2] https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html
Fixes: d859900c4c ("bpf, libbpf: support global data/bss/rodata sections")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In commit da11b41758 ("libbpf: teach libbpf about log_level bit 2"),
the BPF_LOG_BUF_SIZE was increased to 16M. The XDP socket part of
libbpf allocated the log_buf on the stack, but for the new 16M buffer
size this is not going to work. Change the code so it uses a 16K buffer
instead.
Fixes: da11b41758 ("libbpf: teach libbpf about log_level bit 2")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The issue is reported at https://github.com/libbpf/libbpf/issues/28.
Basically, per C standard, for
void *memcpy(void *dest, const void *src, size_t n)
if "dest" or "src" is NULL, regardless of whether "n" is 0 or not,
the result of memcpy is undefined. clang ubsan reported three such
instances in bpf.c with the following pattern:
memcpy(dest, 0, 0).
Although in practice, no known compiler will cause issues when
copy size is 0. Let us still fix the issue to silence ubsan
warnings.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds libbpf support for BTF Var and DataSec kinds. Main point
here is that libbpf needs to do some preparatory work before the
whole BTF object can be loaded into the kernel, that is, fixing up
of DataSec size taken from the ELF section size and non-static
variable offset which needs to be taken from the ELF's string section.
Upstream LLVM doesn't fix these up since at time of BTF emission
it is too early in the compilation process thus this information
isn't available yet, hence loader needs to take care of it.
Note, deduplication handling has not been in the scope of this work
and needs to be addressed in a future commit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://reviews.llvm.org/D59441
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This work adds BPF loader support for global data sections
to libbpf. This allows to write BPF programs in more natural
C-like way by being able to define global variables and const
data.
Back at LPC 2018 [0] we presented a first prototype which
implemented support for global data sections by extending BPF
syscall where union bpf_attr would get additional memory/size
pair for each section passed during prog load in order to later
add this base address into the ldimm64 instruction along with
the user provided offset when accessing a variable. Consensus
from LPC was that for proper upstream support, it would be
more desirable to use maps instead of bpf_attr extension as
this would allow for introspection of these sections as well
as potential live updates of their content. This work follows
this path by taking the following steps from loader side:
1) In bpf_object__elf_collect() step we pick up ".data",
".rodata", and ".bss" section information.
2) If present, in bpf_object__init_internal_map() we add
maps to the obj's map array that corresponds to each
of the present sections. Given section size and access
properties can differ, a single entry array map is
created with value size that is corresponding to the
ELF section size of .data, .bss or .rodata. These
internal maps are integrated into the normal map
handling of libbpf such that when user traverses all
obj maps, they can be differentiated from user-created
ones via bpf_map__is_internal(). In later steps when
we actually create these maps in the kernel via
bpf_object__create_maps(), then for .data and .rodata
sections their content is copied into the map through
bpf_map_update_elem(). For .bss this is not necessary
since array map is already zero-initialized by default.
Additionally, for .rodata the map is frozen as read-only
after setup, such that neither from program nor syscall
side writes would be possible.
3) In bpf_program__collect_reloc() step, we record the
corresponding map, insn index, and relocation type for
the global data.
4) And last but not least in the actual relocation step in
bpf_program__relocate(), we mark the ldimm64 instruction
with src_reg = BPF_PSEUDO_MAP_VALUE where in the first
imm field the map's file descriptor is stored as similarly
done as in BPF_PSEUDO_MAP_FD, and in the second imm field
(as ldimm64 is 2-insn wide) we store the access offset
into the section. Given these maps have only single element
ldimm64's off remains zero in both parts.
5) On kernel side, this special marked BPF_PSEUDO_MAP_VALUE
load will then store the actual target address in order
to have a 'map-lookup'-free access. That is, the actual
map value base address + offset. The destination register
in the verifier will then be marked as PTR_TO_MAP_VALUE,
containing the fixed offset as reg->off and backing BPF
map as reg->map_ptr. Meaning, it's treated as any other
normal map value from verification side, only with
efficient, direct value access instead of actual call to
map lookup helper as in the typical case.
Currently, only support for static global variables has been
added, and libbpf rejects non-static global variables from
loading. This can be lifted until we have proper semantics
for how BPF will treat multi-object BPF loads. From BTF side,
libbpf will set the value type id of the types corresponding
to the ".bss", ".data" and ".rodata" names which LLVM will
emit without the object name prefix. The key type will be
left as zero, thus making use of the key-less BTF option in
array maps.
Simple example dump of program using globals vars in each
section:
# bpftool prog
[...]
6784: sched_cls name load_static_dat tag a7e1291567277844 gpl
loaded_at 2019-03-11T15:39:34+0000 uid 0
xlated 1776B jited 993B memlock 4096B map_ids 2238,2237,2235,2236,2239,2240
# bpftool map show id 2237
2237: array name test_glo.bss flags 0x0
key 4B value 64B max_entries 1 memlock 4096B
# bpftool map show id 2235
2235: array name test_glo.data flags 0x0
key 4B value 64B max_entries 1 memlock 4096B
# bpftool map show id 2236
2236: array name test_glo.rodata flags 0x80
key 4B value 96B max_entries 1 memlock 4096B
# bpftool prog dump xlated id 6784
int load_static_data(struct __sk_buff * skb):
; int load_static_data(struct __sk_buff *skb)
0: (b7) r6 = 0
; test_reloc(number, 0, &num0);
1: (63) *(u32 *)(r10 -4) = r6
2: (bf) r2 = r10
; int load_static_data(struct __sk_buff *skb)
3: (07) r2 += -4
; test_reloc(number, 0, &num0);
4: (18) r1 = map[id:2238]
6: (18) r3 = map[id:2237][0]+0 <-- direct addr in .bss area
8: (b7) r4 = 0
9: (85) call array_map_update_elem#100464
10: (b7) r1 = 1
; test_reloc(number, 1, &num1);
[...]
; test_reloc(string, 2, str2);
120: (18) r8 = map[id:2237][0]+16 <-- same here at offset +16
122: (18) r1 = map[id:2239]
124: (18) r3 = map[id:2237][0]+16
126: (b7) r4 = 0
127: (85) call array_map_update_elem#100464
128: (b7) r1 = 120
; str1[5] = 'x';
129: (73) *(u8 *)(r9 +5) = r1
; test_reloc(string, 3, str1);
130: (b7) r1 = 3
131: (63) *(u32 *)(r10 -4) = r1
132: (b7) r9 = 3
133: (bf) r2 = r10
; int load_static_data(struct __sk_buff *skb)
134: (07) r2 += -4
; test_reloc(string, 3, str1);
135: (18) r1 = map[id:2239]
137: (18) r3 = map[id:2235][0]+16 <-- direct addr in .data area
139: (b7) r4 = 0
140: (85) call array_map_update_elem#100464
141: (b7) r1 = 111
; __builtin_memcpy(&str2[2], "hello", sizeof("hello"));
142: (73) *(u8 *)(r8 +6) = r1 <-- further access based on .bss data
143: (b7) r1 = 108
144: (73) *(u8 *)(r8 +5) = r1
[...]
For Cilium use-case in particular, this enables migrating configuration
constants from Cilium daemon's generated header defines into global
data sections such that expensive runtime recompilations with LLVM can
be avoided altogether. Instead, the ELF file becomes effectively a
"template", meaning, it is compiled only once (!) and the Cilium daemon
will then rewrite relevant configuration data from the ELF's .data or
.rodata sections directly instead of recompiling the program. The
updated ELF is then loaded into the kernel and atomically replaces
the existing program in the networking datapath. More info in [0].
Based upon recent fix in LLVM, commit c0db6b6bd444 ("[BPF] Don't fail
for static variables").
[0] LPC 2018, BPF track, "ELF relocation for static data in BPF",
http://vger.kernel.org/lpc-bpf2018.html#session-3
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adjust the code for relocations slightly with no functional changes,
so that upcoming patches that will introduce support for relocations
into the .data, .rodata and .bss sections can be added independent
of these changes.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
vsprintf() in __base_pr() uses nonliteral format string and it breaks
compilation for those who provide corresponding extra CFLAGS, e.g.:
https://github.com/libbpf/libbpf/issues/27
If libbpf is built with the flags from PR:
libbpf.c:68:26: error: format string is not a string literal
[-Werror,-Wformat-nonliteral]
return vfprintf(stderr, format, args);
^~~~~~
1 error generated.
Ignore this warning since the use case in libbpf.c is legit.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow bpf_prog_load_xattr() to specify log_level for program loading.
Teach libbpf to accept log_level with bit 2 set.
Increase default BPF_LOG_BUF_SIZE from 256k to 16M.
There is no downside to increase it to a maximum allowed by old kernels.
Existing 256k limit caused ENOSPC errors and users were not able to see
verifier error which is printed at the end of the verifier log.
If ENOSPC is hit, double the verifier log and try again to capture
the verifier error.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
"pevent" to "tep" renaming of:
- all "pevent" input arguments of libtraceevent internal functions.
- all local "pevent" variables of libtraceevent.
This makes the implementation consistent with the chosen naming
convention, tep (trace event parser), and will avoid any confusion with
the old pevent name
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/linux-trace-devel/20190401132111.13727-5-tstoyanov@vmware.com
Link: http://lkml.kernel.org/r/20190401164344.944953447@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The member "pevent" of the struct tep_event_filter is renamed to "tep".
This makes the struct consistent with the chosen naming convention:
tep (trace event parser), instead of the old pevent.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/linux-trace-devel/20190401132111.13727-4-tstoyanov@vmware.com
Link: http://lkml.kernel.org/r/20190401164344.785896189@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The member "pevent" of the struct tep_event is renamed to "tep". This
makes the struct consistent with the chosen naming convention:
tep (trace event parser), instead of the old pevent.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/linux-trace-devel/20190401132111.13727-3-tstoyanov@vmware.com
Link: http://lkml.kernel.org/r/20190401164344.627724996@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Input arguments of libtraceevent APIs are renamed from "struct
tep_handle *pevent" to "struct tep_handle *tep". This makes the API
consistent with the chosen naming convention: tep (trace event parser),
instead of the old pevent.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/linux-trace-devel/20190401132111.13727-2-tstoyanov@vmware.com
Link: http://lkml.kernel.org/r/20190401164344.465573837@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename some traceevent APIs for consistency:
tep_pid_is_registered() to tep_is_pid_registered()
tep_file_bigendian() to tep_is_file_bigendian()
to make the names and return values consistent with other tep_is_... APIs
tep_data_lat_fmt() to tep_data_latency_format()
to make the name more descriptive
tep_host_bigendian() to tep_is_bigendian()
tep_set_host_bigendian() to tep_set_local_bigendian()
tep_is_host_bigendian() to tep_is_local_bigendian()
"host" can be confused with VMs, and "local" is about the local
machine. All tep_is_..._bigendian(struct tep_handle *tep) APIs return
the saved data in the tep handle, while tep_is_bigendian() returns
the running machine's endianness.
All tep_is_... functions are modified to return bool value, instead of int.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20190327141946.4353-2-tstoyanov@vmware.com
Link: http://lkml.kernel.org/r/20190401164344.288624897@goodmis.org
[ Removed some extra parenthesis around return statements ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch removes call to exit() from tep_filter_add_filter_str(). A
library function should not force the application to exit. In the
current implementation tep_filter_add_filter_str() calls exit() when a
special "test_filters" mode is set, used only for debugging purposes.
When this mode is set and a filter is added - its string is printed to
the console and exit() is called. This patch changes the logic - when in
"test_filters" mode, the filter string is still printed, but the exit()
is not called. It is up to the application to track when "test_filters"
mode is set and to call exit, if needed.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20190326154328.28718-9-tstoyanov@vmware.com
Link: http://lkml.kernel.org/r/20190401164344.121717482@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch removes trivial filter tep APIs:
enum tep_filter_trivial_type
tep_filter_event_has_trivial()
tep_update_trivial()
tep_filter_clear_trivial()
Trivial filters is an optimization, used only in the first version of
KernelShark. The API is deprecated, the next KernelShark release does
not use it.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20190326154328.28718-4-tstoyanov@vmware.com
Link: http://lkml.kernel.org/r/20190401164343.968458918@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As return is not a function we do not need parenthesis around the return
value. Also, a function returning bool does not need to add !!.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lkml.kernel.org/r/20190401164343.817886725@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As struct tep_handler definition is not exposed as part of libtraceevent
API, its fields cannot be accessed directly by the library users. This
patch implements new APIs, which can be used to access the struct
tep_handler fields:
tep_get_event() - retrieves an event pointer at a specific index
tep_get_first_event() - is modified to use tep_get_event()
tep_clear_flag() - clears a tep handle flag
tep_test_flag() - test if a given flag is set
tep_get_header_timestamp_size() - returns the size of the timestamp stored
in the header.
tep_get_cpus() - returns the number of CPUs
tep_is_old_format() - returns true if data was created by an
older kernel with the old data format
tep_set_print_raw() - have the output print in the raw format
tep_set_test_filters() - debugging utility for testing tep filters
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/linux-trace-devel/20190325145017.30246-4-tstoyanov@vmware.com
Link: http://lkml.kernel.org/r/20190401164343.679629539@goodmis.org
[ Renamed some newly added "pevent" to "tep" ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds