The cost of buildid cache processing is high: reading all events in
output perf.data, opening each elf file to read buildids then copying
them into ~/.debug directory. In switch output mode, these heavy works
block perf from receiving perf events for too long.
Enable no-buildid and no-buildid-cache by default if --switch-output is
provided. Still allow user use --no-no-buildid to explicitly enable
buildid in this case.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1461178794-40467-6-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Updated man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Without this patch, the last output doesn't have timestamp appended if
--timestamp-filename is not explicitly provided. For example:
# perf record -a --switch-output &
[1] 11224
# kill -s SIGUSR2 11224
[ perf record: dump data: Woken up 1 times ]
# [ perf record: Dump perf.data.2015122622372823 ]
# fg
perf record -a --switch-output
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.027 MB perf.data (540 samples) ]
# ls -l
total 836
-rw------- 1 root root 33256 Dec 26 22:37 perf.data <---- *Odd*
-rw------- 1 root root 817156 Dec 26 22:37 perf.data.2015122622372823
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1461178794-40467-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Updated man page, that also got an entry for --timestamp-filename ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is an upper limit to what tooling considers a valid callchain,
and it was tied to the hardcoded value in the kernel,
PERF_MAX_STACK_DEPTH (127), now that this can be tuned via a sysctl,
make it read it and use that as the upper limit, falling back to
PERF_MAX_STACK_DEPTH for kernels where this sysctl isn't present.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-yjqsd30nnkogvj5oyx9ghir9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the chances we'll overflow the mmap buffer, manual fine tuning
trumps this.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wxygbxmp1v9mng1ea28wet02@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If one uses:
# perf trace --min-stack 16
Then it implicitly means that callgraphs should be enabled, and the best
option in terms of widespread availability is "dwarf".
Further work needed to choose a better alternative, LBR, in capable
systems.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xtjmnpkyk42npekxz3kynzmx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to the one in the other tools (report, script, top).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lh7kk5a5t3erwxw31ah0cgar@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Works just like with 'perf report'. In some cases we may want to have
more than 127 entries, the default maximum.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-mqkz2p5ok2978gztb0vsnocc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing --cpus option that will display only given cpus. Could be
used together with color-cpus option.
$ perf sched map --cpus 0,1
*A0 309999.786924 secs A0 => rcu_sched:7
*. 309999.786930 secs
*B0 . 309999.786931 secs B0 => rcuos/2:25
B0 *A0 309999.786947 secs
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460467771-26532-9-git-send-email-jolsa@kernel.org
[ Added entry to man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding --color-cpus option to display selected cpus with background
color (red by default). It helps on navigating through the perf sched
map output.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460467771-26532-8-git-send-email-jolsa@kernel.org
[ Added entry to man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding --color-pids option to display selected pids in color (blue by
default). It helps on navigating through the 'perf sched map' output.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460467771-26532-7-git-send-email-jolsa@kernel.org
[ Added entry to man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now, one can print the call chain for every encountered sys_exit event,
e.g.:
$ perf trace -e nanosleep --call-graph dwarf path/to/ex_sleep
1005.757 (1000.090 ms): ex_sleep/13167 nanosleep(...) = 0
syscall_slow_exit_work ([kernel.kallsyms])
syscall_return_slowpath ([kernel.kallsyms])
int_ret_from_sys_call ([kernel.kallsyms])
__nanosleep (/usr/lib/libc-2.23.so)
[unknown] (/usr/lib/libQt5Core.so.5.6.0)
QThread::sleep (/usr/lib/libQt5Core.so.5.6.0)
main (path/to/ex_sleep)
__libc_start_main (/usr/lib/libc-2.23.so)
_start (path/to/ex_sleep)
Note that it is advised to increase the number of mmap pages to prevent
event losses when using this new feature. Often, adding `-m 10M` to the
`perf trace` invocation is enough.
This feature is also available in strace when built with libunwind via
`strace -k`. Performance wise, this solution is much better:
$ time find path/to/linux &> /dev/null
real 0m0.051s
user 0m0.013s
sys 0m0.037s
$ time perf trace -m 800M --call-graph dwarf find path/to/linux &> /dev/null
real 0m2.624s
user 0m1.203s
sys 0m1.333s
$ time strace -k find path/to/linux &> /dev/null
real 0m35.398s
user 0m10.403s
sys 0m23.173s
Note that it is currently not possible to configure the print output.
Adding such a feature, similar to what is available in `perf script` via
its `--fields` knob can be added later on.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 1460115255-17648-1-git-send-email-milian.wolff@kdab.com
[ Split from a larger patch, do not print the IP, left align,
remove dup call symbol__init(), added man page entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Document some features for specifying events in the perf list manpage:
- Event groups
- Leader sampling
- How to specify raw PMU events in the new syntax
- Global versus per process PMUs.
- Access restrictions
- Fix Intel SDM URL
v2: Lots of new content. address review feedback.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1459810686-15913-1-git-send-email-andi@firstfloor.org
[ Add quotes to some keywords, such as "any" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using 'perf script' to look at PT traces it is often useful to
ignore the initialization code at the beginning.
On larger traces which may have many millions of instructions in
initialization code doing that in a pipeline can be very slow, with perf
script spending a lot of CPU time calling printf and writing data.
This patch adds an extension to the --itrace argument that skips 'n'
events (instructions, branches or transactions) at the beginning. This
is much more efficient.
v2:
Add support for BTS (Adrian Hunter)
Document in itrace.txt
Fix branch check
Check transactions and instructions too
Committer note:
To test intel_pt one needs to make sure VT-x isn't active, i.e.
stopping KVM guests on the test machine, as described by Andi Kleen
at http://lkml.kernel.org/r/20160301234953.GD23621@tassilo.jf.intel.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1459187142-20035-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -U/-K (--all-user/--all-kernel) options to use the perf record
--all-user/--all-kernel options.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1458823940-24583-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Correctly document what is implemented for :ppp on Intel CPUs in recent
kernels.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1458575793-12091-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is used by several other tools, better move it outside tools/perf.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-34s9kue3xq9w5mijdmfrfx8s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add metric only support for -A too. This requires a new print function
that prints the metrics in the right order.
v2: Fix manpage
v3: Simplify nrcpus computation
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-7-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new mode to only print metrics. Sometimes we don't care about the
raw values, just want the computed metrics. This allows more compact
printing, so with -I each sample is only a single line. This also
allows easier plotting and processing with other tools.
The main target is with using --topdown, but it also works with -T and
standard perf stat. A few metrics are not supported.
To avoiding having to hardcode all the metrics in the code it uses a two
pass approach: first compute dummy metrics and only print the headers in
the print_metric callback. Then use the callback to print the actual
values.
There are some additional changes in the stat printout code to handle
all metrics being on a single line.
One issue is that the column code doesn't know in advance what events
are not supported by the CPU, and it would be hard to find out as this
could change based on dynamic conditions. That causes empty columns in
some cases.
The output can be fairly wide, often you may need more than 80 columns.
Example:
% perf stat -a -I 1000 --metric-only
1.001452803 frontend cycles idle insn per cycle stalled cycles per insn branch-misses of all branches
1.001452803 158.91% 0.66 2.39 2.92%
2.002192321 180.63% 0.76 2.08 2.96%
3.003088282 150.59% 0.62 2.57 2.84%
4.004369835 196.20% 0.98 1.62 3.79%
5.005227314 231.98% 0.84 1.90 4.71%
v2: Lots of updates.
v3: Use slightly narrower columns
v4: Add comment
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-6-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With all the recently added fields in the perf stat CSV output we should
finally document them in the man page. Do this here.
v2: Fix fields in documentation (Jiri)
v3: fix order of fields again (Jiri)
v4: Change order again.
v5: Document more fields (Jiri)
v6: Move time stamp first
v7: More fixes (Jiri)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-5-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I'm surprised this remained undocumented since at least 2011. And it is
actually a very useful switch, as Steve and I came to realize recently.
Add the text from
2cba3ffb9a ("perf stat: Add -d -d and -d -d -d options to show more CPU events")
which added the incrementing aspect to -d.
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mel Gorman <mgorman@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2cba3ffb9a ("perf stat: Add -d -d and -d -d -d options to show more CPU events")
Link: http://lkml.kernel.org/r/1457347294-32546-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Support hierarchy output for perf-top using --hierarchy option.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-19-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --hierarchy option is to show output in hierarchy mode. It extends
folding/unfolding in the TUI and GTK browsers to support sort items as
well as callchains. Users can toggle the items to see the performance
result at wanted level.
$ perf report --hierarchy --tui
Overhead Command / Shared Object / Symbol
--------------------------------------------------
+ 32.96% gnome-shell
- 15.11% swapper
- 14.97% [kernel.vmlinux]
6.82% [k] intel_idle
0.66% [k] menu_select
0.43% [k] __hrtimer_start_range_ns
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-17-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow user to easily switch all events to user or kernel space with simple
--all-user or --all-kernel options.
This will be handy within perf mem/c2c wrappers to switch easily monitoring
modes.
Committer note:
Testing it:
# perf record --all-kernel --all-user -a sleep 2
Error: option `all-user' cannot be used with all-kernel
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--all-user Configure all used events to run in user space.
--all-kernel Configure all used events to run in kernel space.
# perf record --all-user --all-kernel -a sleep 2
Error: option `all-kernel' cannot be used with all-user
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--all-kernel Configure all used events to run in kernel space.
--all-user Configure all used events to run in user space.
# perf record --all-user -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.416 MB perf.data (162 samples) ]
# perf report | grep '\[k\]'
# perf record --all-kernel -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.423 MB perf.data (296 samples) ]
# perf report | grep '\[\.\]'
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-2-git-send-email-jolsa@kernel.org
[ Made those options to be mutually exclusive ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '--system' option means $(sysconfdir)/perfconfig and '--user' means
$HOME/.perfconfig. If none is used, both system and user config file are
read. E.g.:
# perf config [<file-option>] [options]
With an specific config file:
# perf config --user | --system
or both user and system config file:
# perf config
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1455126685-32367-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a --jit/-j option to perf inject.
This options injects MMAP records into the perf.data file to cover the
jitted code mmaps. It also emits ELF images for each function in the
jidump file. Those images are created where the jitdump file is. The
MMAP records point to that location as well.
Typical flow:
$ perf record -k mono -- java -agentpath:libpjvmti.so java_class
$ perf inject --jit -i perf.data -o perf.data.jitted
$ perf report -i perf.data.jitted
Note that jitdump.h support is not limited to Java, it works with any
jitted environment modified to emit the jitdump file format, include
those where code can be jitted multiple times and moved around.
The jitdump.h format is adapted from the Oprofile project.
The genelf.c (ELF binary generation) depends on MD5 hash encoding for
the buildid. To enable this, libssl-dev must be installed. If not, then
genelf.c defaults to using urandom to generate the buildid, which is not
ideal. The Makefile auto-detects the presence on libssl-dev.
This version mmaps the jitdump file to create a marker MMAP record in
the perf.data file. The marker is used to detect jitdump and cause perf
inject to inject the jitted mmaps and generate ELF images for jitted
functions.
In V8, the following fixes and changes were made among other things:
- the jidump header format include a new flags field to be used
to carry information about the configuration of the runtime agent.
Contributed by: Adrian Hunter <adrian.hunter@intel.com>
- Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file
at which the code resides.
Contributed by: Adrian Hunter <adrian.hunter@intel.com>
- Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic
objects to match the file offset.
Contributed by: Adrian Hunter <adrian.hunter@intel.com>
- JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all
MMAP events in one go, so it does not obey finished_round semantics, so drop the
finished_round events from the output perf.data file.
Contributed by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com
[ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Explain 'man.viewer' variable and how to add new man viewer tools.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-6-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Explain 'report' section's variables:
'percent-limit', 'queue-size' and 'children'.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-4-git-send-email-treeze.taeung@gmail.com
[ Fix some grammar issues, add some more info ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Explain 'call-graph' section and its variables:
'record-mode', 'dump-size', 'print-type', 'order', 'sort-key',
'threshold' and 'print-limit'.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This option controls display of column headers (like 'Overhead' and
'Symbol') in 'report' and 'top'. If this option is false, they are
hidden. This option is only applied to TUI.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --percent-limit option was changed to be applied to callchains as
well as to hist entries recently, but it missed to update the doc.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1454508683-5735-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The description of the memory sort key (used by --mem-mode) was
misplaced. Move it under the --sort option so that it can be referenced
properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1454508683-5735-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Explain 'annotate' section and its variables.
'hide_src_code', 'use_offset', 'jump_arrows',
'show_linenr', 'show_nr_jump' and 'show_total_period'.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452253193-30502-5-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Explain 'tui' and 'gtk' sections and these variables.
'top', 'report' and 'annotate'
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452253193-30502-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Explain 'colors' section and its variables, used for The variables for
customizing the colors used in the output for the 'report', 'top' and
'annotate' in the TUI, those are:
'top', 'medium', 'normal', 'selected',
'jump_arrows', 'addr' and 'root'.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452253193-30502-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
USe 'jump_arrows' config name instead of 'code' on 'colors' section.
'colors.code' config is only for jump arrows on assembly code listings
i.e.
│ ┌──jmp 1333
│ │ xchg %ax,%ax
│ │ mov %r15,%r10
│ └─→cmp %r15,%r14
But this config name seems unfit.
'jump_arrows' is more descriptive than 'code'.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452240971-25418-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --buildid-all option is to record build-id of all DSOs in the file.
It might be very costly to postprocess samples to find which DSO hits.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1452519429-31779-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently perf report only shows a help message "For a higher level
overview, try: perf report --sort comm,dso" unconditionally (even if
the sort keys were used). Add more help tips and show randomly.
Load tips from ${prefix}/share/doc/perf-tip/tips.txt file.
$ perf report | tail
0.10% swapper [kernel.vmlinux] [k] irq_exit
0.09% swapper [kernel.vmlinux] [k] flush_smp_call_function_queue
0.08% swapper [kernel.vmlinux] [k] native_write_msr_safe
0.03% swapper [kernel.vmlinux] [k] group_sched_in
0.01% perf [kernel.vmlinux] [k] native_write_msr_safe
#
# (Tip: Search options using a keyword: perf report -h <keyword>)
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452166913-27046-1-git-send-email-namhyung@kernel.org
[ Renamed it to perf_tip() and the parameter dirname to dirpath to fix the build on older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan