If we get ENOMEM or EIO in f2fs_find_entry, we should stop right away.
Otherwise, for example, we can get duplicate directory entry by ->chash and
->clevel.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch reduces to call them across the whole tree.
- sync_inode_page()
- update_inode_page()
- update_inode()
- f2fs_write_inode()
Instead, checkpoint will flush all the dirty inode metadata before syncing
node pages.
Note that, this is doable, since we call mark_inode_dirty_sync() for all
inode's field change which needs to update on-disk inode as well.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch calls mark_inode_dirty_sync() for the following on-disk inode
changes.
-> largest
-> ctime/mtime/atime
-> i_current_depth
-> i_xattr_nid
-> i_pino
-> i_advise
-> i_flags
-> i_mode
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fix two bugs in error path of f2fs_move_rehashed_dirents:
- release dir's inode page if fail to call kmalloc
- recover i_current_depth if fail to converting
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With below steps, we will see that dentry page becoming unaccessable later.
This is because we forget updating i_current_depth in inode during inline
dentry conversion, after that, once we failed at somewhere, it will leave
i_current_depth as 0 in non-inline directory. Then, during ->lookup, the
current_depth value makes all dentry pages in first level invisible. Fix
it.
1) mount f2fs with inline_dentry option
2) mkdir dir
3) touch 180 files named [0-179] in dir
4) touch 180 in dir (fail after inline dir conversion)
5) ll dir
ls: cannot access /mnt/f2fs/dir/0: No such file or directory
ls: cannot access /mnt/f2fs/dir/1: No such file or directory
ls: cannot access /mnt/f2fs/dir/2: No such file or directory
ls: cannot access /mnt/f2fs/dir/3: No such file or directory
ls: cannot access /mnt/f2fs/dir/4: No such file or directory
drwxr-xr-x 2 root root 4096 may 13 21:47 ./
drwxr-xr-x 3 root root 4096 may 13 21:46 ../
-????????? ? ? ? ? ? 0
-????????? ? ? ? ? ? 1
-????????? ? ? ? ? ? 10
-????????? ? ? ? ? ? 100
-????????? ? ? ? ? ? 101
-????????? ? ? ? ? ? 102
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The filename length in dirent of may become zero-sized after random junk
data injection, once encounter such dirent, find_target_dentry or
f2fs_add_inline_entries will run into an infinite loop. So let f2fs being
aware of that to avoid deadloop.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With below serials, we will lose parts of dirents:
1) mount f2fs with inline_dentry option
2) echo 1 > /sys/fs/f2fs/sdX/dir_level
3) mkdir dir
4) touch 180 files named [1-180] in dir
5) touch 181 in dir
6) echo 3 > /proc/sys/vm/drop_caches
7) ll dir
ls: cannot access 2: No such file or directory
ls: cannot access 4: No such file or directory
ls: cannot access 5: No such file or directory
ls: cannot access 6: No such file or directory
ls: cannot access 8: No such file or directory
ls: cannot access 9: No such file or directory
...
total 360
drwxr-xr-x 2 root root 4096 Feb 19 15:12 ./
drwxr-xr-x 3 root root 4096 Feb 19 15:11 ../
-rw-r--r-- 1 root root 0 Feb 19 15:12 1
-rw-r--r-- 1 root root 0 Feb 19 15:12 10
-rw-r--r-- 1 root root 0 Feb 19 15:12 100
-????????? ? ? ? ? ? 101
-????????? ? ? ? ? ? 102
-????????? ? ? ? ? ? 103
...
The reason is: when doing the inline dir conversion, we didn't consider
that directory has hierarchical hash structure which can be configured
through sysfs interface 'dir_level'.
By default, dir_level of directory inode is 0, it means we have one bucket
in hash table located in first level, all dirents will be hashed in this
bucket, so it has no problem for us to do the duplication simply between
inline dentry page and converted normal dentry page.
However, if we configured dir_level with the value N (greater than 0), it
will expand the bucket number of first level hash table by 2^N - 1, it
hashs dirents into different buckets according their hash value, if we
still move all dirents to first bucket, it makes incorrent locating for
inline dirents, the result is, although we can iterate all dirents through
->readdir, we can't stat some of them in ->lookup which based on hash
table searching.
This patch fixes this issue by rehashing dirents into correct position
when converting inline directory.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds the renamed functions moved from the f2fs crypto files.
1. definitions for per-file encryption used by ext4 and f2fs.
2. crypto.c for encrypt/decrypt functions
a. IO preparation:
- fscrypt_get_ctx / fscrypt_release_ctx
b. before IOs:
- fscrypt_encrypt_page
- fscrypt_decrypt_page
- fscrypt_zeroout_range
c. after IOs:
- fscrypt_decrypt_bio_pages
- fscrypt_pullback_bio_page
- fscrypt_restore_control_page
3. policy.c supporting context management.
a. For ioctls:
- fscrypt_process_policy
- fscrypt_get_policy
b. For context permission
- fscrypt_has_permitted_context
- fscrypt_inherit_context
4. keyinfo.c to handle permissions
- fscrypt_get_encryption_info
- fscrypt_free_encryption_info
5. fname.c to support filename encryption
a. general wrapper functions
- fscrypt_fname_disk_to_usr
- fscrypt_fname_usr_to_disk
- fscrypt_setup_filename
- fscrypt_free_filename
b. specific filename handling functions
- fscrypt_fname_alloc_buffer
- fscrypt_fname_free_buffer
6. Makefile and Kconfig
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add a new help f2fs_update_data_blkaddr to clean up redundant codes.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_convert_inline_page introduce what read_inline_data
already does for copying out the inline data from inode_page.
We can use read_inline_data instead to simplify the code.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
no need to wait inline file page writeback for no one
use it, so this patch delete unnecessary wait.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In write_begin, if storage supports stable_page, we don't need to wait for
writeback to update its contents.
This patch introduces to use wait_for_stable_page instead of
wait_on_page_writeback.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The sceanrio is:
1. create fully node blocks
2. flush node blocks
3. write inline_data for all the node blocks again
4. flush node blocks redundantly
So, this patch tries to flush inline_data when flushing node blocks.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If inline_data option is disable, when truncating an inline inode with
size which is not exceed maxinum inline size, we should not convert
inline inode to regular one to avoid the overhead of synchronizing
conversion.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If user tries to update or read data, we don't need to call f2fs_balance_fs
which triggers f2fs_gc, which increases unnecessary long latency.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We can check inode's inline_data flag when calling to convert it.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This fixes error handling for calls to various functions in the
function recover_inline_data to check if these particular functions
either return a error code or the boolean value false to signal their
caller they have failed internally and if this arises return false
to signal failure immediately to the caller of recover_inline_data
as we cannot continue after failures to calling either the function
truncate_inline_inode or truncate_blocks.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When converting inline dentry, we will zero out target dentry page before
duplicating data of inline dentry into target page, it become overhead
since inline dentry size is not small.
So this patch tries to remove unneeded initializing in the space of target
dentry page.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In following call path, we will pass a locked and referenced ipage
pointer to get_new_data_page:
- init_inode_metadata
- make_empty_dir
- get_new_data_page
There are two exit paths in get_new_data_page when error occurs:
1) grab_cache_page fails, ipage will not be released;
2) f2fs_reserve_block fails, ipage will be released in callee.
So, it's not consistent for error handling in get_new_data_page.
For f2fs_reserve_block, it's not very easy to change the rule
of error handling, since it's already complicated.
Here we deside to choose an easy way to fix this issue:
If any error occur in get_new_data_page, we will ensure releasing
ipage in this function.
The same issue is in f2fs_convert_inline_dir, fix that too.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch implements filename encryption support for f2fs_lookup.
Note that, f2fs_find_entry should be outside of f2fs_(un)lock_op().
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds encryption support in read and write paths.
Note that, in f2fs, we need to consider cleaning operation.
In cleaning procedure, we must avoid encrypting and decrypting written blocks.
So, this patch implements move_encrypted_block().
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch activates the following APIs for encryption support.
The rules quoted by ext4 are:
- An unencrypted directory may contain encrypted or unencrypted files
or directories.
- All files or directories in a directory must be protected using the
same key as their containing directory.
- Encrypted inode for regular file should not have inline_data.
- Encrypted symlink and directory may have inline_data and inline_dentry.
This patch activates the following APIs.
1. f2fs_link : validate context
2. f2fs_lookup : ''
3. f2fs_rename : ''
4. f2fs_create/f2fs_mkdir : inherit its dir's context
5. f2fs_direct_IO : do buffered io for regular files
6. f2fs_open : check encryption info
7. f2fs_file_mmap : ''
8. f2fs_setattr : ''
9. f2fs_file_write_iter : '' (Called by sys_io_submit)
10. f2fs_fallocate : do not support fcollapse
11. f2fs_evict_inode : free_encryption_info
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs_sb_info and page pointers in f2fs_io_info structure.
With this change, we can reduce a lot of parameters for IO functions.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If f2fs was corrupted with missing dot dentries, it needs to recover them after
fsck.f2fs detection.
The underlying precedure is:
1. The fsck.f2fs remains F2FS_INLINE_DOTS flag in directory inode, if it detects
missing dot dentries.
2. When f2fs looks up the corrupted directory, it triggers f2fs_add_link with
proper inode numbers and their dot and dotdot names.
3. Once f2fs recovers the directory without errors, it removes F2FS_INLINE_DOTS
finally.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Split __set_data_blkaddr from f2fs_update_extent_cache for readability.
Additionally rename __set_data_blkaddr to set_data_blkaddr for exporting.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fast symlink can utilize inline data flow to avoid using any
i_addr region, since we need to handle many cases such as
truncation, roll-forward recovery, and fsck/dump tools.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch removes wrong f2fs_bug_on in truncate_inline_inode.
When there is no space, it can happen a corner case where i_isze is over
MAX_INLINE_SIZE while its inode is still inline_data.
The scenario is
1. write small data into file #A.
2. fill the whole partition to 100%.
3. truncate 4096 on file #A.
4. write data at 8192 offset.
--> f2fs_write_begin
-> -ENOSPC = f2fs_convert_inline_page
-> f2fs_write_failed
-> truncate_blocks
-> truncate_inline_inode
BUG_ON, since i_size is 4096.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously if inode is with inline data, we will try to invalid partial inline
data in page #0 when we truncate size of inode in truncate_partial_data_page().
And then we set page #0 to dirty, after this we can synchronize inode page with
page #0 at ->writepage().
But sometimes we will fail to operate page #0 in truncate_partial_data_page()
due to below reason:
a) if offset is zero, we will skip setting page #0 to dirty.
b) if page #0 is not uptodate, we will fail to update it as it has no mapping
data.
So with following operations, we will meet recent data which should be
truncated.
1.write inline data to file
2.sync first data page to inode page
3.truncate file size to 0
4.truncate file size to max_inline_size
5.echo 1 > /proc/sys/vm/drop_caches
6.read file --> meet original inline data which is remained in inode page.
This patch renames truncate_inline_data() to truncate_inline_inode() for code
readability, then use truncate_inline_inode() to truncate inline data in inode
page in truncate_blocks() and truncate page #0 in truncate_partial_data_page()
for fixing.
v2:
o truncate partially #0 page in truncate_partial_data_page to avoid keeping
old data in #0 page.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this patch, we do these jobs:
1. rename {check,update}_extent_cache to {lookup,update}_extent_info;
2. introduce universal lookup/update interface of extent cache:
f2fs_{lookup,update}_extent_cache including above two real functions, then
export them to function callers.
So after above cleanup, we can add new rb-tree based extent cache into exported
interfaces.
v2:
o remove "f2fs_" for inner function {lookup,update}_extent_info suggested by
Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces f2fs_update_dentry to remove redundant code in
f2fs_add_inline_entry and __f2fs_add_link.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
1. make truncate_inline_date static;
2. remove parameter @from of truncate_inline_date as callers only pass zero.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch cleans up parameters on IO paths.
The key idea is to use f2fs_io_info adding a parameter, block address, and then
use this structure as parameters.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If an inode has converted inline_data which was written to the disk, we should
set its inode flag for further fsync so that this inline_data can be recovered
from sudden power off.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The locked page should be released before returning the function.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If i_size becomes large outside of MAX_INLINE_DATA, we shoud convert the inode.
Otherwise, we can make some dirty pages during the truncation, and those pages
will be written through f2fs_write_data_page.
At that moment, the inode has still inline_data, so that it tries to write non-
zero pages into inline_data area.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The # of inline_data inode is decreased only when it has inline_data.
After clearing the flag, we can't decreased the number.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch simplifies the inline_data usage with the following rule.
1. inline_data is set during the file creation.
2. If new data is requested to be written ranges out of inline_data,
f2fs converts that inode permanently.
3. There is no cases which converts non-inline_data inode to inline_data.
4. The inline_data flag should be changed under inode page lock.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch declares f2fs_convert_inline_dir as a static function, which was
reported by kbuild test robot.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces f2fs_dentry_ptr structure for the use of a function
parameter in inline_dentry operations.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a core function, f2fs_fill_dentries, to remove
redundant code in f2fs_readdir and f2fs_read_inline_dir.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, init_inode_metadata does not hold any parent directory's inode
page. So, f2fs_init_acl can grab its parent inode page without any problem.
But, when we use inline_dentry, that page is grabbed during f2fs_add_link,
so that we can fall into deadlock condition like below.
INFO: task mknod:11006 blocked for more than 120 seconds.
Tainted: G OE 3.17.0-rc1+ #13
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mknod D ffff88003fc94580 0 11006 11004 0x00000000
ffff880007717b10 0000000000000002 ffff88003c323220 ffff880007717fd8
0000000000014580 0000000000014580 ffff88003daecb30 ffff88003c323220
ffff88003fc94e80 ffff88003ffbb4e8 ffff880007717ba0 0000000000000002
Call Trace:
[<ffffffff8173dc40>] ? bit_wait+0x50/0x50
[<ffffffff8173d4cd>] io_schedule+0x9d/0x130
[<ffffffff8173dc6c>] bit_wait_io+0x2c/0x50
[<ffffffff8173da3b>] __wait_on_bit_lock+0x4b/0xb0
[<ffffffff811640a7>] __lock_page+0x67/0x70
[<ffffffff810acf50>] ? autoremove_wake_function+0x40/0x40
[<ffffffff811652cc>] pagecache_get_page+0x14c/0x1e0
[<ffffffffa029afa9>] get_node_page+0x59/0x130 [f2fs]
[<ffffffffa02a63ad>] read_all_xattrs+0x24d/0x430 [f2fs]
[<ffffffffa02a6ca2>] f2fs_getxattr+0x52/0xe0 [f2fs]
[<ffffffffa02a7481>] f2fs_get_acl+0x41/0x2d0 [f2fs]
[<ffffffff8122d847>] get_acl+0x47/0x70
[<ffffffff8122db5a>] posix_acl_create+0x5a/0x150
[<ffffffffa02a7759>] f2fs_init_acl+0x29/0xcb [f2fs]
[<ffffffffa0286a8d>] init_inode_metadata+0x5d/0x340 [f2fs]
[<ffffffffa029253a>] f2fs_add_inline_entry+0x12a/0x2e0 [f2fs]
[<ffffffffa0286ea5>] __f2fs_add_link+0x45/0x4a0 [f2fs]
[<ffffffffa028b5b6>] ? f2fs_new_inode+0x146/0x220 [f2fs]
[<ffffffffa028b816>] f2fs_mknod+0x86/0xf0 [f2fs]
[<ffffffff811e3ec1>] vfs_mknod+0xe1/0x160
[<ffffffff811e4b26>] SyS_mknod+0x1f6/0x200
[<ffffffff81741d7f>] tracesys+0xe1/0xe6
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add inline dir functions into normal dir ops' function to handle inline ops.
Besides, we enable inline dir mode when a new dir inode is created if
inline_data option is on.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Adds Functions to implement inline dir init/lookup/insert/delete/convert ops.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: remove needless reserved area copy, pointed by Dan Carpenter]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When trying to write inline_data, we should truncate any data block allocated
and pointed by the inode block.
We should consider the data index is not 0.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a very limited functionality for atomic write support.
In order to support atomic write, this patch adds two ioctls:
o F2FS_IOC_START_ATOMIC_WRITE
o F2FS_IOC_COMMIT_ATOMIC_WRITE
The database engine should be aware of the following sequence.
1. open
-> ioctl(F2FS_IOC_START_ATOMIC_WRITE);
2. writes
: all the written data will be treated as atomic pages.
3. commit
-> ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE);
: this flushes all the data blocks to the disk, which will be shown all or
nothing by f2fs recovery procedure.
4. repeat to #2.
The IO pattens should be:
,- START_ATOMIC_WRITE ,- COMMIT_ATOMIC_WRITE
CP | D D D D D D | FSYNC | D D D D | FSYNC ...
`- COMMIT_ATOMIC_WRITE
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch checks inline_data one more time under the inode page lock whether
its inline_data is converted or not.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The init_inode_metadata calls truncate_blocks when error is occurred.
The callers holds f2fs_lock_op, so we should not call it again in
truncate_blocks.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a parentheses to make clear for condition check.
And also it changes the return type for better meanings.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If mkwrite is called to an inode having inline_data, it can overwrite the data
index space as NEW_ADDR. (e.g., the first 4 bytes are coincidently zero)
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a inode number list in which represents inodes having
appended data writes or updated data writes after last checkpoint.
This will be used at fsync to determine whether the recovery information
should be written or not.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We don't need to wait on page writeback for these cases.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch splits grab_cache_page_write_begin into grab_cache_page and
wait_on_page_writeback for node pages.
This patch intends to enhance the latency to get node pages by alleviating
unnecessary wait_on_page_writeback.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previous we do not truncate inline data in inode page when setattr, so following
case could still read the inline data which has already truncated:
1.write inline data
2.ftruncate size to 0
3.ftruncate size to max inline data size
4.read from offset 0
This patch introduces truncate_inline_data() to fix this problem.
change log from v1:
o fix a bug and do not truncate first page data after truncate inline data.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
We should unlock page in ->readpage() path and also should unlock & release page
in error path of ->write_begin() to avoid deadlock or memory leak.
So let's add release code to fix the problem when we fail to read inline data.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
"boo sync" parameter is never referenced in f2fs_wait_on_page_writeback.
We should remove this parameter.
Signed-off-by: Yuan Zhong <yuan.mark.zhong@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Here is a case which could read inline page data not from first page.
1. write inline data
2. lseek to offset 4096
3. read 4096 bytes from offset 4096
(read_inline_data read inline data page to non-first page,
And previously VFS has add this page to page cache)
4. ftruncate offset 8192
5. read 4096 bytes from offset 4096
(we meet this updated page with inline data in cache)
So we should leave this page with inited data and uptodate flag
for this case.
Change log from v1:
o fix a deadlock bug
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Change log from v1:
o reduce unneeded memset in __f2fs_convert_inline_data
>From 58796be2bd2becbe8d52305210fb2a64e7dd80b6 Mon Sep 17 00:00:00 2001
From: Chao Yu <chao2.yu@samsung.com>
Date: Mon, 30 Dec 2013 09:21:33 +0800
Subject: [PATCH] f2fs: avoid to left uninitialized data in page when read
inline data
We left uninitialized data in the tail of page when we read an inline data
page. So let's initialize left part of the page excluding inline data region.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The get_dnode_of_data nullifies inode and node page when error is occurred.
There are two cases that passes inode page into get_dnode_of_data().
1. make_empty_dir()
-> get_new_data_page()
-> f2fs_reserve_block(ipage)
-> get_dnode_of_data()
2. f2fs_convert_inline_data()
-> __f2fs_convert_inline_data()
-> f2fs_reserve_block(ipage)
-> get_dnode_of_data()
This patch adds correct error handling codes when get_dnode_of_data() returns
an error.
At first, f2fs_reserve_block() calls f2fs_put_dnode() whenever reserve_new_block
returns an error.
So, the rule of f2fs_reserve_block() is to nullify inode page when there is any
error internally.
Finally, two callers of f2fs_reserve_block() should call f2fs_put_dnode()
appropriately if they got an error since successful f2fs_reserve_block().
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a inline_data recovery routine with the following policy.
[prev.] [next] of inline_data flag
o o -> recover inline_data
o x -> remove inline_data, and then recover data blocks
x o -> remove inline_data, and then recover inline_data
x x -> recover data blocks
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds the number of inline_data files into the status information.
Note that the number is reset whenever the filesystem is newly mounted.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Change log from v1:
o handle NULL pointer of grab_cache_page_write_begin() pointed by Chao Yu.
This patch refactors f2fs_convert_inline_data to check a couple of conditions
internally for deciding whether it needs to convert inline_data or not.
So, the new f2fs_convert_inline_data initially checks:
1) f2fs_has_inline_data(), and
2) the data size to be changed.
If the inode has inline_data but the size to fill is less than MAX_INLINE_DATA,
then we don't need to convert the inline_data with data allocation.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Functions to implement inline data read/write, and move inline data to
normal data block when file size exceeds inline data limitation.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim