The pci_request_acs() function needs to be called before PCI
probing to be effective. So move it to another call-place to
ensure that.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This step makes it very easy to keep track about the current
intialization state of the iommu driver. With this change we
can initialize the IOMMU hardware to a point where it can
remap interrupts and later resume the initializion to enable
dma remapping.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This function will initialize everthing necessary so that
devices can do DMA. This includes dma_ops and iommu_ops.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This function will be called before the PCI subsystem is
initialized. Therefore dev_name doen't work and IOMMU
information can't be printed to the klog as before. Move the
code to print that information to a later point where PCI
initializtion has already happened.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
For interrupt remapping the relevant IOMMU initialization
needs to run earlier at boot when the PCI subsystem is not
yet initialized. To support that this patch splits the parts
of IOMMU initialization which need PCI accesses out of the
initial setup path so that this can be done later.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This makes it easier to propagate errors while parsing the
IVRS table and makes the amd_iommu_init_err hack obsolete.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
A few sparse warnings fire in drivers/iommu/amd_iommu_init.c.
Fix most of them with this patch. Also fix the sparse
warnings in drivers/iommu/irq_remapping.c while at it.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
write_file_bool() modifies 32 bits of data, so "amd_iommu_unmap_flush"
needs to be 32 bits as well or we'll corrupt memory. Fortunately it
looks like the data is aligned with a gap after the declaration so this
is harmless in production.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The iommu_shutdown callback is not initialized when the AMD
IOMMU driver runs in passthrough mode. Fix that by moving
the callback initialization before the check for
passthrough mode.
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
At some point pci_get_bus_and_slot started to enable
interrupts. Since this function is used in the
amd_iommu_resume path it will enable interrupts on resume
which causes a warning. The fix will use a cached pointer
to the root-bridge to re-enable the IOMMU in case the BIOS
is broken.
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
For interrupt remapping the enablement of the IOMMU MSI
interrupt needs to be deferred because the IOMMU itself will
be initialized before the io-apics are up and running. So
the code to setup the MSI is moved seperated from the
hardware-setup routine now.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Unfortunatly the interrupts for the event log and the
peripheral page-faults are only enabled at boot but not
re-enabled at resume. Fix that.
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
When ioremap_nocache fails in iommu initialization the code
calls release_mem_region immediatly. But the function is
called again when the propagates into the upper init
functions leading to a double-free. Fix that.
Reported-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This function is called from enable_iommus(), which in turn is used
from amd_iommu_resume().
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The hardware-initializtion part of the AMD IOMMU driver is
split out into a seperate function. This function can now be
called either from amd_iommu_init() itself or any other
place if the hardware needs to be ready earlier. This will
be used to implement interrupt remapping for AMD.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
To protect the command buffer from hanging when a device
does not respond to an IOTLB invalidation, set a timeout of
1s for outstanding IOTLB invalidations.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
If the device starts to use IOMMUv2 features the dma handles
need to stay valid. The only sane way to do this is to use a
identity mapping for the device and not translate it by the
iommu. This is implemented with this patch. Since this lifts
the device-isolation there is also a new kernel parameter
which allows to disable that feature.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
In mixed IOMMU setups this flag inidicates whether an IOMMU
supports the v2 features or not. This patch also adds a
global flag together with a function to query that flag from
other code. The flag shows if at least one IOMMUv2 is in the
system.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Read the number of PASIDs supported by each IOMMU in the
system and take the smallest number as the maximum value
supported by the IOMMU driver.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Convert the contents of 'struct dev_table_entry' to u64 to
allow updating the DTE wit 64bit writes as required by the
spec.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
A few parts of the driver were missing in drivers/iommu.
Move them there to have the complete driver in that
directory.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Joerg Roedel