This function compiles to 522 bytes of machine code.
Error paths are not very time critical.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
gfs2_file_splice_read() f_op grabs and releases the cluster-wide
inode glock to sync the inode size to the latest.
Without this, generic_file_splice_read() uses an older i_size value
and can return EOF for valid offsets in the inode.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Function inode_go_demote_ok had some code that was only executed
if gl_holders was not empty. However, if gl_holders was not empty,
the only caller, demote_ok(), returns before inode_go_demote_ok
would ever be called. Therefore, it's dead code, so I removed it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
In certain cases, the 802.11 mesh pathtable code wants to
iterate over all of the entries in the forwarding table from
the receive path, which is inside an RCU read-side critical
section. Enable walks inside atomic sections by allowing
GFP_ATOMIC allocations for the walker state.
Change all existing callsites to pass in GFP_KERNEL.
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
[also adjust gfs2/glock.c and rhashtable tests]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After gfs2 has withdrawn the filesystem, it may still have many locks not
in the unlocked state. If it is using lock_dlm, it will failed trying
the unlocks since it has already unmounted the lock manager. Instead, it
should set the SDF_SKIP_DLM_UNLOCK flag on withdraw, to signal that
it can skip the lock_manager on unlocks, and failback to lock_nolock
style unlocking.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
We only have six patches ready for this merge window.
- Arnd Bergmann contributed a patch that fixes an uninitialized variable
warning.
- The second patch avoids a kernel panic due to referencing an iopen
glock that may not be held, in an error path.
- The third patch fixes a rounding error that caused xfs_tests direct IO
write "fsx" tests to fail on GFS2.
- The fourth patch tidies up the code path when glocks are being reused
to recreate a dinode that was recently deleted.
- The fifth reverts an ages-old patch that should no longer be needed, and
which interfered with the transition of dinodes from unlinked to free.
- And lastly, a patch to eliminate a function parameter that's not needed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW6qcKAAoJENeLYdPf93o70SwH/0czrFBIWaPbRgyuGLNvye4G
qvfIk2Yky3UKfgUA+ZW+cAWkxeKubc9scMwce0elKxm0e03rNwIX0slIOx8hymj3
19AgMnj3kcCJvRLdkBITNqnd6vTY2quadLN3j8I2cCNbHOV0GelEkP4jWcTHB+2F
AG0ZJOsvvrcD1ClgdIvGdV52qipZApS/kgZjLpJBEyzxq8SpRe9vNqMDsDyoKWgi
yjp0+aJ0IJAWA24fzdT5HE4fb5yGRWehg51l6Z2mbfXAvT+oeKcYrQiq1zhUutHw
dT6SUHbjt+y0EulPClsf3r5zjRjVCCbpj0wkUY3kPB98lgnpAD2QnUP/JDA+CD0=
=xRmX
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"We only have six patches ready for this merge window:
- Arnd Bergmann contributed a patch that fixes an uninitialized
variable warning.
- The second patch avoids a kernel panic due to referencing an iopen
glock that may not be held, in an error path.
- The third patch fixes a rounding error that caused xfs_tests direct
IO write "fsx" tests to fail on GFS2.
- The fourth patch tidies up the code path when glocks are being
reused to recreate a dinode that was recently deleted.
- The fifth reverts an ages-old patch that should no longer be
needed, and which interfered with the transition of dinodes from
unlinked to free.
- And lastly, a patch to eliminate a function parameter that's not
needed"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Eliminate parameter non_block on gfs2_inode_lookup
GFS2: Don't filter out I_FREEING inodes anymore
GFS2: Prevent delete work from occurring on glocks used for create
GFS2: Fix direct IO write rounding error
gfs2: avoid uninitialized variable warning
GFS2: Check if iopen is held when deleting inode
Now that we're not filtering out I_FREEING inodes from our lookups
anymore, we can eliminate the non_block parameter from the lookup
function.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
This patch basically reverts a very old patch from 2008,
7a9f53b3c1, with the title
"Alternate gfs2_iget to avoid looking up inodes being freed".
The original patch was designed to avoid a deadlock caused by lock
ordering with try_rgrp_unlink. The patch forced the function to not
find inodes that were being removed by VFS. The problem is, that
made it impossible for nodes to delete their own unlinked dinodes
after a certain point in time, because the inode needed was not found
by this filtering process. There is no longer a need for the patch,
since function try_rgrp_unlink no longer locks the inode: All it does
is queue the glock onto the delete work_queue, so there should be no
more deadlock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch tries to prevent delete work (queued via iopen callback)
from executing if the glock is currently being used to create
a new inode.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
The fsx test in xfstests was failing because it was using direct IO
writes which were using a bad calculation. It was using
loff_t lstart = offset & (PAGE_CACHE_SIZE - 1); when it should be
loff_t lstart = offset & ~(PAGE_CACHE_SIZE - 1);
Thus, the write at offset 0x67e00 was calculating lstart to be
0xe00, the address of our corruption. Instead, it should have been
0x67000. This patch fixes the calculation.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
We get a bogus warning about a potential uninitialized variable
use in gfs2, because the compiler does not figure out that we
never use the leaf number if get_leaf_nr() returns an error:
fs/gfs2/dir.c: In function 'get_first_leaf':
fs/gfs2/dir.c:802:9: warning: 'leaf_no' may be used uninitialized in this function [-Wmaybe-uninitialized]
fs/gfs2/dir.c: In function 'dir_split_leaf':
fs/gfs2/dir.c:1021:8: warning: 'leaf_no' may be used uninitialized in this function [-Wmaybe-uninitialized]
Changing the 'if (!error)' to 'if (!IS_ERR_VALUE(error))' is
sufficient to let gcc understand that this is exactly the same
condition as in IS_ERR() so it can optimize the code path enough
to understand it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull security subsystem updates from James Morris:
- EVM gains support for loading an x509 cert from the kernel
(EVM_LOAD_X509), into the EVM trusted kernel keyring.
- Smack implements 'file receive' process-based permission checking for
sockets, rather than just depending on inode checks.
- Misc enhancments for TPM & TPM2.
- Cleanups and bugfixes for SELinux, Keys, and IMA.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (41 commits)
selinux: Inode label revalidation performance fix
KEYS: refcount bug fix
ima: ima_write_policy() limit locking
IMA: policy can be updated zero times
selinux: rate-limit netlink message warnings in selinux_nlmsg_perm()
selinux: export validatetrans decisions
gfs2: Invalid security labels of inodes when they go invalid
selinux: Revalidate invalid inode security labels
security: Add hook to invalidate inode security labels
selinux: Add accessor functions for inode->i_security
security: Make inode argument of inode_getsecid non-const
security: Make inode argument of inode_getsecurity non-const
selinux: Remove unused variable in selinux_inode_init_security
keys, trusted: seal with a TPM2 authorization policy
keys, trusted: select hash algorithm for TPM2 chips
keys, trusted: fix: *do not* allow duplicate key options
tpm_ibmvtpm: properly handle interrupted packet receptions
tpm_tis: Tighten IRQ auto-probing
tpm_tis: Refactor the interrupt setup
tpm_tis: Get rid of the duplicate IRQ probing code
...
Mark those kmem allocations that are known to be easily triggered from
userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to
memcg. For the list, see below:
- threadinfo
- task_struct
- task_delay_info
- pid
- cred
- mm_struct
- vm_area_struct and vm_region (nommu)
- anon_vma and anon_vma_chain
- signal_struct
- sighand_struct
- fs_struct
- files_struct
- fdtable and fdtable->full_fds_bits
- dentry and external_name
- inode for all filesystems. This is the most tedious part, because
most filesystems overwrite the alloc_inode method.
The list is far from complete, so feel free to add more objects.
Nevertheless, it should be close to "account everything" approach and
keep most workloads within bounds. Malevolent users will be able to
breach the limit, but this was possible even with the former "account
everything" approach (simply because it did not account everything in
fact).
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes an error condition in which an inode is partially
created in gfs2_create_inode() but then some error is discovered,
which causes it to fail and call iput() before the iopen glock is
created or held. In that case, gfs2_delete_inode would try to
unlock an iopen glock that doesn't yet exist. Therefore, we test
its holder (which must exist) for the HIF_HOLDER bit before trying
to dq it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Here is a list of patches we've accumulated for GFS2 for the current upstream
merge window. Last window's set was short, but I warned that this one would
be bigger, and so it is. We've got 19 patches:
- A patch from Abhi Das to propagate the GFS2_DIF_SYSTEM bit so that newly
added journals don't get flagged, deleted, and recreated by fsck.gfs2.
- Two patches from Andreas Gruenbacher to improve GFS2 performance where
extended attributes are involved.
- A patch from Andy Price to fix a suspicious rcu dereference error.
- Two patches from Ben Marzinski that rework how GFS2's NFS cookies are
managed. This fixes readdir problems with nfs-over-gfs2.
- A patch from Ben Marzinski that fixes a race in unmounting GFS2.
- A set of four patches from me to move the resource group reservations
inside the gfs2 inode to improve performance and fix a bug whereby
get_write_access improperly prevented some operations like chown.
- A patch from me to spinlock-protect the setting of system statfs file data.
This was causing small discrepancies between df and du.
- A patch from me to reintroduce a timeout while clearing glocks which was
accidentally dropped some time ago.
- A patch from me to wait for iopen glock dequeues in order to improve
deleting of files that were unlinked from a different cluster node.
- A patch from me to ensure metadata address spaces get truncated when an
inode is evicted.
- A patch from me to fix a bug in which a memory leak could occur in some
error cases when inodes were trying to be created.
- A patch to consistently use iopen glocks to transition from the unlinked
state to the deleted state.
- A patch to fix a glock reference count error when inode creation fails.
- A patch from Junxiao Bi to fix an flock panic.
- A patch from Markus Elfring that removes an unnecessary if.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWlUOCAAoJENeLYdPf93o78/IH/0PfoQtQnYQpvbTPgaFICEUI
rx+uLqPxpJgjJMsbIy+VA/bhZsbuENDbor99Cs6GiTLy3Q/4TKNY9NxDN+aO8o+Q
qrp3ZANkyTGaneCzrXzfgmOxe1G8xRQ7pboRUEt2yPlGK1oLax+PR4uPb+IuJ5Wa
QvSwnZj+9K2LkMQkKPyxoltjZiZLywvNB5dx0F35+dvriQxHXfJ1Naek6gs140MB
SfG4/Zi8dfGOJQjSQTUENatFhyFB0V7CbDPFuBVzTGD8IS4ASgqIBMFjO0VBHkP4
gt4zb0BJAn0aQcbxIaDtsuEffpn+5zdK/Onq5g4Fr9ZJv3fkVpVcOgYui/rkDD0=
=28ev
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"Here is a list of patches we've accumulated for GFS2 for the current
upstream merge window. Last window's set was short, but I warned that
this one would be bigger, and so it is. We've got 19 patches:
- A patch from Abhi Das to propagate the GFS2_DIF_SYSTEM bit so that
newly added journals don't get flagged, deleted, and recreated by
fsck.gfs2.
- Two patches from Andreas Gruenbacher to improve GFS2 performance
where extended attributes are involved.
- A patch from Andy Price to fix a suspicious rcu dereference error.
- Two patches from Ben Marzinski that rework how GFS2's NFS cookies
are managed. This fixes readdir problems with nfs-over-gfs2.
- A patch from Ben Marzinski that fixes a race in unmounting GFS2.
- A set of four patches from me to move the resource group
reservations inside the gfs2 inode to improve performance and fix a
bug whereby get_write_access improperly prevented some operations
like chown.
- A patch from me to spinlock-protect the setting of system statfs
file data. This was causing small discrepancies between df and du.
- A patch from me to reintroduce a timeout while clearing glocks
which was accidentally dropped some time ago.
- A patch from me to wait for iopen glock dequeues in order to
improve deleting of files that were unlinked from a different
cluster node.
- A patch from me to ensure metadata address spaces get truncated
when an inode is evicted.
- A patch from me to fix a bug in which a memory leak could occur in
some error cases when inodes were trying to be created.
- A patch to consistently use iopen glocks to transition from the
unlinked state to the deleted state.
- A patch to fix a glock reference count error when inode creation
fails.
- A patch from Junxiao Bi to fix an flock panic.
- A patch from Markus Elfring that removes an unnecessary if"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: fix flock panic issue
GFS2: Don't do glock put on when inode creation fails
GFS2: Always use iopen glock for gl_deletes
GFS2: Release iopen glock in gfs2_create_inode error cases
GFS2: Truncate address space mapping when deleting an inode
GFS2: Wait for iopen glock dequeues
gfs2: clear journal live bit in gfs2_log_flush
gfs2: change gfs2 readdir cookie
gfs2: keep offset when splitting dir leaf blocks
GFS2: Reintroduce a timeout in function gfs2_gl_hash_clear
GFS2: Update master statfs buffer with sd_statfs_spin locked
GFS2: Reduce size of incore inode
GFS2: Make rgrp reservations part of the gfs2_inode structure
GFS2: Extract quota data from reservations structure (revert 5407e24)
gfs2: Extended attribute readahead optimization
gfs2: Extended attribute readahead
GFS2: Use rht_for_each_entry_rcu in glock_hash_walk
GFS2: Delete an unnecessary check before the function call "iput"
gfs2: Automatically set GFS2_DIF_SYSTEM flag on system files
Pull misc vfs updates from Al Viro:
"All kinds of stuff. That probably should've been 5 or 6 separate
branches, but by the time I'd realized how large and mixed that bag
had become it had been too close to -final to play with rebasing.
Some fs/namei.c cleanups there, memdup_user_nul() introduction and
switching open-coded instances, burying long-dead code, whack-a-mole
of various kinds, several new helpers for ->llseek(), assorted
cleanups and fixes from various people, etc.
One piece probably deserves special mention - Neil's
lookup_one_len_unlocked(). Similar to lookup_one_len(), but gets
called without ->i_mutex and tries to avoid ever taking it. That, of
course, means that it's not useful for any directory modifications,
but things like getting inode attributes in nfds readdirplus are fine
with that. I really should've asked for moratorium on lookup-related
changes this cycle, but since I hadn't done that early enough... I
*am* asking for that for the coming cycle, though - I'm going to try
and get conversion of i_mutex to rwsem with ->lookup() done under lock
taken shared.
There will be a patch closer to the end of the window, along the lines
of the one Linus had posted last May - mechanical conversion of
->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
inode_is_locked()/inode_lock_nested(). To quote Linus back then:
-----
| This is an automated patch using
|
| sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
| sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
| sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[ ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
| sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
| sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
|
| with a very few manual fixups
-----
I'm going to send that once the ->i_mutex-affecting stuff in -next
gets mostly merged (or when Linus says he's about to stop taking
merges)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
nfsd: don't hold i_mutex over userspace upcalls
fs:affs:Replace time_t with time64_t
fs/9p: use fscache mutex rather than spinlock
proc: add a reschedule point in proc_readfd_common()
logfs: constify logfs_block_ops structures
fcntl: allow to set O_DIRECT flag on pipe
fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
fs: xattr: Use kvfree()
[s390] page_to_phys() always returns a multiple of PAGE_SIZE
nbd: use ->compat_ioctl()
fs: use block_device name vsprintf helper
lib/vsprintf: add %*pg format specifier
fs: use gendisk->disk_name where possible
poll: plug an unused argument to do_poll
amdkfd: don't open-code memdup_user()
cdrom: don't open-code memdup_user()
rsxx: don't open-code memdup_user()
mtip32xx: don't open-code memdup_user()
[um] mconsole: don't open-code memdup_user_nul()
[um] hostaudio: don't open-code memdup_user()
...
Pull vfs xattr updates from Al Viro:
"Andreas' xattr cleanup series.
It's a followup to his xattr work that went in last cycle; -0.5KLoC"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
xattr handlers: Simplify list operation
ocfs2: Replace list xattr handler operations
nfs: Move call to security_inode_listsecurity into nfs_listxattr
xfs: Change how listxattr generates synthetic attributes
tmpfs: listxattr should include POSIX ACL xattrs
tmpfs: Use xattr handler infrastructure
btrfs: Use xattr handler infrastructure
vfs: Distinguish between full xattr names and proper prefixes
posix acls: Remove duplicate xattr name definitions
gfs2: Remove gfs2_xattr_acl_chmod
vfs: Remove vfs_xattr_cmp
When gfs2 releases the glock of an inode, it must invalidate all
information cached for that inode, including the page cache and acls.
Use the new security_inode_invalidate_secctx hook to also invalidate
security labels in that case. These items will be reread from disk
when needed after reacquiring the glock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: cluster-devel@redhat.com
[PM: fixed spelling errors and description line lengths]
Signed-off-by: Paul Moore <pmoore@redhat.com>
Commit 4f6563677a ("Move locks API users to locks_lock_inode_wait()")
moved flock/posix lock identify code to locks_lock_inode_wait(), but
missed to set fl_flags to FL_FLOCK which will cause kernel panic in
locks_lock_inode_wait().
Fixes: 4f6563677a ("Move locks API users to locks_lock_inode_wait()")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Currently the error path of function gfs2_inode_lookup calls function
gfs2_glock_put corresponding to an earlier call to gfs2_glock_get for
the inode glock. That's wrong because the error path also calls
iget_failed() which eventually calls iput, which eventually calls
gfs2_evict_inode, which does another gfs2_glock_put. This double-put
can cause the glock reference count to get off.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, when function try_rgrp_unlink queued a glock for
delete_work to reclaim the space, it used the inode glock to do so.
That's different from the iopen callback which uses the iopen glock
for the same purpose. We should be consistent and always use the
iopen glock. This may also save us reference counting problems with
the inode glock, since clear_glock does an extra glock_put() for the
inode glock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Some error cases in gfs2_create_inode were not unlocking the iopen
glock, getting the reference count off. This adds the proper unlock.
The error logic in function gfs2_create_inode was also convoluted,
so this patch simplifies it. It also takes care of a bug in
which gfs2_qa_delete() was not called in an error case.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In function gfs2_delete_inode() we write and flush the mapping for
a glock, among other things. We truncate the mapping for the inode,
but we never truncate the mapping for the glock. This patch makes it
also truncate the metamapping. This avoid cases where the glock is
reused by another process who is trying to recreate an inode in its
place using the same block.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
This patch changes every glock_dq for iopen glocks into a dq_wait.
This makes sure that iopen glocks do not outlive the inode itself.
In turn, that ensures that anyone trying to unlink the glock will
be able to find the inode when it receives a remote iopen callback.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
When gfs2 was unmounting filesystems or changing them to read-only it
was clearing the SDF_JOURNAL_LIVE bit before the final log flush. This
caused a race. If an inode glock got demoted in the gap between
clearing the bit and the shutdown flush, it would be unable to reserve
log space to clear out the active items list in inode_go_sync, causing an
error in inode_go_inval because the glock was still dirty.
To solve this, the SDF_JOURNAL_LIVE bit is now cleared inside the
shutdown log flush. This means that, because of the locking on the log
blocks, either inode_go_sync will be able to reserve space to clean the
glock before the shutdown flush, or the shutdown flush will clean the
glock itself, before inode_go_sync fails to reserve the space. Either
way, the glock will be clean before inode_go_inval.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
gfs2 currently returns 31 bits of filename hash as a cookie that readdir
uses for an offset into the directory. When there are a large number of
directory entries, the likelihood of a collision goes up way too
quickly. GFS2 will now return cookies that are guaranteed unique for a
while, and then fail back to using 30 bits of filename hash.
Specifically, the directory leaf blocks are divided up into chunks based
on the minimum size of a gfs2 directory entry (48 bytes). Each entry's
cookie is based off the chunk where it starts, in the linked list of
leaf blocks that it hashes to (there are 131072 hash buckets). Directory
entries will have unique names until they take reach chunk 8192.
Assuming the largest filenames possible, and the least efficient spacing
possible, this new method will still be able to return unique names when
the previous method has statistically more than a 99% chance of a
collision. The non-unique names it fails back to are guaranteed to not
collide with the unique names.
unique cookies will be in this format:
- 1 bit "0" to make sure the the returned cookie is positive
- 17 bits for the hash table index
- 1 bit for the mode "0"
- 13 bits for the offset
non-unique cookies will be in this format:
- 1 bit "0" to make sure the the returned cookie is positive
- 17 bits for the hash table index
- 1 bit for the mode "1"
- 13 more bits of the name hash
Another benefit of location based cookies, is that once a directory's
exhash table is fully extended (so that multiple hash table indexs do
not use the same leaf blocks), gfs2 can skip sorting the directory
entries until it reaches the non-unique ones, and then it only needs to
sort these. This provides a significant speed up for directory reads of
very large directories.
The only issue is that for these cookies to continue to point to the
correct entry as files are added and removed from the directory, gfs2
must keep the entries at the same offset in the leaf block when they are
split (see my previous patch). This means that until all the nodes in a
cluster are running with code that will split the directory leaf blocks
this way, none of the nodes can use the new cookie code. To deal with
this, gfs2 now has the mount option loccookie, which, if set, will make
it return these new location based cookies. This option must not be set
until all nodes in the cluster are at least running this version of the
kernel code, and you have guaranteed that there are no outstanding
cookies required by other software, such as NFS.
gfs2 uses some of the extra space at the end of the gfs2_dirent
structure to store the calculated readdir cookies. This keeps us from
needing to allocate a seperate array to hold these values. gfs2
recomputes the cookie stored in de_cookie for every readdir call. The
time it takes to do so is small, and if gfs2 expected this value to be
saved on disk, the new code wouldn't work correctly on filesystems
created with an earlier version of gfs2.
One issue with adding de_cookie to the union in the gfs2_dirent
structure is that it caused the union to align itself to a 4 byte
boundary, instead of its previous 2 byte boundary. This changed the
offset of de_rahead. To solve that, I pulled de_rahead out of the union,
since it does not need to be there.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Currently, when gfs2 splits a directory leaf block, the dirents that
need to be copied to the new leaf block are packed into the start of it.
This is good for space efficiency. However, if gfs2 were to copy those
dirents into the exact same offset in the new leaf block as they had in
the old block, it would be able to generate a readdir cookie based on
the dirent location, that would be guaranteed to be unique up well past
where the current code is statistically almost guaranteed to have
collisions. So, gfs2 now keeps the dirent's offset in the block the
same when it copies it to the new leaf block.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
At some point in the past, we used to have a timeout when GFS2 was
unmounting, trying to clear out its glocks. If the timeout expires,
it would dump the remaining glocks to the kernel messages so that
developers can debug the problem. That timeout was eliminated,
probably by accident. This patch reintroduces it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function update_statfs called gfs2_statfs_change_out
to update the master statfs buffer without the sd_statfs_spin held.
In theory, another process could call gfs2_statfs_sync, which takes
the sd_statfs_spin lock and re-reads m_sc from the buffer. So there's
a theoretical timing window in which one process could write the
master statfs buffer, then another comes along and re-reads it, wiping
out the changes.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch makes no functional changes. Its goal is to reduce the
size of the gfs2 inode in memory by rearranging structures and
changing the size of some variables within the structure.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, multi-block reservation structures were allocated
from a special slab. This patch folds the structure into the gfs2_inode
structure. The disadvantage is that the gfs2_inode needs more memory,
even when a file is opened read-only. The advantages are: (a) we don't
need the special slab and the extra time it takes to allocate and
deallocate from it. (b) we no longer need to worry that the structure
exists for things like quota management. (c) This also allows us to
remove the calls to get_write_access and put_write_access since we
know the structure will exist.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
new method: ->get_link(); replacement of ->follow_link(). The differences
are:
* inode and dentry are passed separately
* might be called both in RCU and non-RCU mode;
the former is indicated by passing it a NULL dentry.
* when called that way it isn't allowed to block
and should return ERR_PTR(-ECHILD) if it needs to be called
in non-RCU mode.
It's a flagday change - the old method is gone, all in-tree instances
converted. Conversion isn't hard; said that, so far very few instances
do not immediately bail out when called in RCU mode. That'll change
in the next commits.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove POSIX_ACL_XATTR_{ACCESS,DEFAULT} and GFS2_POSIX_ACL_{ACCESS,DEFAULT}
and replace them with the definitions in <include/uapi/linux/xattr.h>.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Function gfs2_xattr_acl_chmod is unused since commit e01580bf.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Acked-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch basically reverts the majority of patch 5407e24.
That patch eliminated the gfs2_qadata structure in favor of just
using the reservations structure. The problem with doing that is that
it increases the size of the reservations structure. That is not an
issue until it comes time to fold the reservations structure into the
inode in memory so we know it's always there. By separating out the
quota structure again, we aren't punishing the non-quota users by
making all the inodes bigger, requiring more slab space. This patch
creates a new slab area to allocate the quota stuff so it's managed
a little more sanely.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Instead of submitting a READ_SYNC bio for the inode and a READA bio for
the inode's extended attributes through submit_bh, submit a single READ_SYNC
bio for both through submit_bio when possible. This can be more
efficient on some kinds of block devices.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When gfs2 allocates an inode and its extended attribute block next to
each other at inode create time, the inode's directory entry indicates
that in de_rahead. In that case, we can readahead the extended
attribute block when we read in the inode.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This lockdep splat was being triggered on umount:
[55715.973122] ===============================
[55715.980169] [ INFO: suspicious RCU usage. ]
[55715.981021] 4.3.0-11553-g8d3de01-dirty #15 Tainted: G W
[55715.982353] -------------------------------
[55715.983301] fs/gfs2/glock.c:1427 suspicious rcu_dereference_protected() usage!
The code it refers to is the rht_for_each_entry_safe usage in
glock_hash_walk. The condition that triggers the warning is
lockdep_rht_bucket_is_held(tbl, hash) which is checked in the
__rcu_dereference_protected macro.
The rhashtable buckets are not changed in glock_hash_walk so it's safe
to rely on the rcu protection. Replace the rht_for_each_entry_safe()
usage with rht_for_each_entry_rcu(), which doesn't care whether the
bucket lock is held if the rcu read lock is held.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
The iput() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The xattr_handler operations are currently all passed a file system
specific flags value which the operations can use to disambiguate between
different handlers; some file systems use that to distinguish the xattr
namespace, for example. In some oprations, it would be useful to also have
access to the handler prefix. To allow that, pass a pointer to the handler
to operations instead of the flags value alone.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When new files and directories are created inside a parent directory
we automatically inherit the GFS2_DIF_SYSTEM flag (if set) and assign
it to the new file/dirs.
All new system files/dirs created in the metafs by, say gfs2_jadd,
will have this flag set because they will have parent directories in
the metafs whose GFS2_DIF_SYSTEM flag has already been set (most likely
by a previous mkfs.gfs2)
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Here is a list of patches we've accumulated for GFS2 for the current upstream
merge window. There are only six patches this time:
1. A cleanup patch from Andreas to remove the gl_spin #define in favor
of its value for the sake of clarity.
2. A fix from Andy Price to mark the inode dirty during fallocate.
3. A fix from Andy Price to set s_mode on mount failures to prevent
a stack trace.
4. A patch from me to prevent a kernel BUG() in trans_add_meta/trans_add_data
due to uninitialized storage.
5. A patch from me to protecting our freeing of the in-core directory
hash table to prevent double-free.
6. A fix for a page/block rounding problem that resulted in a metadata
coherency problem when the block size != page size.
I've got a lot more patches in various stages of review and testing,
but I'm afraid they'll have to wait until the next merge window. So
next time we're likely to have a lot more.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWQMSyAAoJENeLYdPf93o7k+EH/inFFqkYxLCyXZngihTHdZvS
tYAwYxPJw6UgSrZ1dY6iwcmhy6YgT7a98RJdPA3Kj0SvJxQVBiJ5uc0VKpK0bj72
l7pVPkMEWCHs8u8RAIGfnik8y6IxOP35+EN0U/3ZLMG1Gc+Tmq9M8KLlnhfX980q
oaniaDJAUaSSW8RxD2AKabxjoJ0DKnE6MtDHsL/JWhp1j5co5BbbwOzBmBa2mLCI
RQ8YEvjqjtgm91g33pkxXJVMjAkFqLjRSVfomd5MSQWRUb+eGIpd3LFThHzVfm55
2f4j2kd2V4i7rTrh8Q3RdoYRoFgpXyxXQ3R2UYL59b7B2DvGTyAKyDxfU237ZXQ=
=yanT
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"Here is a list of patches we've accumulated for GFS2 for the current
upstream merge window. There are only six patches this time:
1. A cleanup patch from Andreas to remove the gl_spin #define in favor
of its value for the sake of clarity.
2. A fix from Andy Price to mark the inode dirty during fallocate.
3. A fix from Andy Price to set s_mode on mount failures to prevent a
stack trace.
4 A patch from me to prevent a kernel BUG() in trans_add_meta/trans_add_data
due to uninitialized storage.
5. A patch from me to protecting our freeing of the in-core directory
hash table to prevent double-free.
6. A fix for a page/block rounding problem that resulted in a metadata
coherency problem when the block size != page size"
I've got a lot more patches in various stages of review and testing,
but I'm afraid they'll have to wait until the next merge window. So
next time we're likely to have a lot more"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Fix rgrp end rounding problem for bsize < page size
GFS2: Protect freeing directory hash table with i_lock spin_lock
gfs2: Remove gl_spin define
gfs2: Add missing else in trans_add_meta/data
GFS2: Set s_mode before parsing mount options
GFS2: fallocate: do not rely on file_update_time to mark the inode dirty
Switch everything to the new and more capable implementation of abs().
Mainly to give the new abs() a bit of a workout.
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes a bug introduced by commit 7005c3e. That patch
tries to map a vm range for resource groups, but the calculation
breaks down when the block size is less than the page size.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch changes function gfs2_dir_hash_inval so it uses the
i_lock spin_lock to protect the in-core hash table, i_hash_cache.
This will prevent double-frees due to a race between gfs2_evict_inode
and inode invalidation.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Commit e66cf161 replaced the gl_spin spinlock in struct gfs2_glock with a
gl_lockref lockref and defined gl_spin as gl_lockref.lock (the spinlock in
gl_lockref). Remove that define to make the references to gl_lockref.lock more
obvious.
Signed-off-by: Andreas Gruenbacher <andreas.gruenbacher@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Instead of having users check for FL_POSIX or FL_FLOCK to call the correct
locks API function, use the check within locks_lock_inode_wait(). This
allows for some later cleanup.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
This patch fixes a timing window that causes a segfault.
The problem is that bd can remain NULL throughout the function
and then reference that NULL pointer if the bh->b_private starts
out NULL, then someone sets it to non-NULL inside the locking.
In that case, bd still needs to be set.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In the generic mount_bdev() function, deactivate_locked_super() is
called after the fill_super() call fails, at which point s_mode has been
set. kill_block_super() expects this and dumps a warning when
FMODE_EXCL is not set in s_mode.
In gfs2_mount() we call deactivate_locked_super() on failure of
gfs2_mount_args(), at which point s_mode has not yet been set. This
causes kill_block_super() to dump a stack trace when gfs2 fails to mount
with invalid options. Set s_mode earlier in gfs2_mount() to avoid that.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Previously __gfs2_fallocate() relied on file_update_time() marking the
inode dirty, but that's not a safe assumption as that function doesn't
dirty the inode in some cases. Mark the inode dirty explicitly.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Here is a list of patches we've accumulated for GFS2 for the current upstream
merge window. This time we've only got six patches, many of which are very small:
- Three cleanups from Andreas Gruenbacher, including a nice cleanup of
the sequence file code for the sbstats debugfs file.
- A patch from Ben Hutchings that changes statistics variables from signed
to unsigned.
- Two patches from me that increase GFS2's glock scalability by switching
from a conventional hash table to rhashtable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJV8XuJAAoJENeLYdPf93o73+UH/j+c5Iug/FaTGHTtHiTZjjcR
GRYOHL1UqwM5xb3YwAi63JSgt0jvf+Oo4hf9LZ8wLEm69yCTo4kc8zMNnqDd5Evc
Zx4jJT5XUBtpjPhCAQyJuE6TCjAqm/fsnZmDqUWiwByDkaUnW7cKB20KrIERbYiL
qBV5F42XSpXnNSWeMs8Sg2vYiCS9omI/ZenoIsL4YQAtKdPlX1Ce4Apv8EO2c09i
HzNseOQierZE6ghCKRELusqqGzgK3GyqWjOWa8ZGLsD9dRyPLK7FNO7HBIBwV2Wb
G6KKnVCDSCRM1zXMc5+YplvzEsHN1dT+rqroxRrYlVHJ3hcHBqNis0X4pjxwHEo=
=idxz
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"Here is a list of patches we've accumulated for GFS2 for the current
upstream merge window. This time we've only got six patches, many of
which are very small:
- three cleanups from Andreas Gruenbacher, including a nice cleanup
of the sequence file code for the sbstats debugfs file.
- a patch from Ben Hutchings that changes statistics variables from
signed to unsigned.
- two patches from me that increase GFS2's glock scalability by
switching from a conventional hash table to rhashtable"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: A minor "sbstats" cleanup
gfs2: Fix a typo in a comment
gfs2: Make statistics unsigned, suitable for use with do_div()
GFS2: Use resizable hash table for glocks
GFS2: Move glock superblock pointer to field gl_name
gfs2: Simplify the seq file code for "sbstats"
Many file systems that implement the show_options hook fail to correctly
escape their output which could lead to unescaped characters (e.g. new
lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This
could lead to confusion, spoofed entries (resulting in things like
systemd issuing false d-bus "mount" notifications), and who knows what
else. This looks like it would only be the root user stepping on
themselves, but it's possible weird things could happen in containers or
in other situations with delegated mount privileges.
Here's an example using overlay with setuid fusermount trusting the
contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use
of "sudo" is something more sneaky:
$ BASE="ovl"
$ MNT="$BASE/mnt"
$ LOW="$BASE/lower"
$ UP="$BASE/upper"
$ WORK="$BASE/work/ 0 0
none /proc fuse.pwn user_id=1000"
$ mkdir -p "$LOW" "$UP" "$WORK"
$ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt
$ cat /proc/mounts
none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0
none /proc fuse.pwn user_id=1000 0 0
$ fusermount -u /proc
$ cat /proc/mounts
cat: /proc/mounts: No such file or directory
This fixes the problem by adding new seq_show_option and
seq_show_option_n helpers, and updating the vulnerable show_option
handlers to use them as needed. Some, like SELinux, need to be open
coded due to unusual existing escape mechanisms.
[akpm@linux-foundation.org: add lost chunk, per Kees]
[keescook@chromium.org: seq_show_option should be using const parameters]
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: J. R. Okajima <hooanon05g@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It seems cleaner to avoid the temporary value here.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
None of these statistics can meaningfully be negative, and the
numerator for do_div() must have the type u64. The generic
implementation of do_div() used on some 32-bit architectures asserts
that, resulting in a compiler error in gfs2_rgrp_congested().
Fixes: 0166b197c2 ("GFS2: Average in only non-zero round-trip times ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch changes the glock hash table from a normal hash table to
a resizable hash table, which scales better. This also simplifies
a lot of code.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
What uniquely identifies a glock in the glock hash table is not
gl_name, but gl_name and its superblock pointer. This patch makes
the gl_name field correspond to a unique glock identifier. That will
allow us to simplify hashing with a future patch, since the hash
algorithm can then take the gl_name and hash its components in one
operation.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Don't use struct gfs2_glock_iter as the helper data structure for iterating
through "sbstats"; we are not iterating through glocks here.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
We can always fill up the bio now, no need to estimate the possible
size based on queue parameters.
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
[hch: rebased and wrote a changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently we have two different ways to signal an I/O error on a BIO:
(1) by clearing the BIO_UPTODATE flag
(2) by returning a Linux errno value to the bi_end_io callback
The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario. Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.
So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Here is a list of patches we've accumulated for GFS2 for the current upstream
merge window. We have a good mixture this time. Here are some of the features:
1. Fix a problem with RO mounts writing to the journal.
2. Further improvements to quotas on GFS2.
3. Added support for rename2 and RENAME_EXCHANGE on GFS2.
4. Increase performance by making glock lru_list less of a bottleneck.
5. Increase performance by avoiding unnecessary buffer_head releases.
6. Increase performance by using average glock round trip time from all CPUs.
7. Fixes for some compiler warnings and minor white space issues.
8. Other misc. bug fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEbBAABAgAGBQJVjFEXAAoJENeLYdPf93o7zqoH926XV0oddQCsGCYg6gq7OL+c
/4q2y9x31hkv5XbPTNcahqR6UsK8JcbcdZD+XAqTftL4Q789FDAdWbYS++45qz8D
YuUFgZd2bc75Ge2qqacgEdv85YRLtws1fRnI6DUpjfN1qJ9kJXX+gk+BSve6rh6V
Qyv8a4DRIw1En5fwt0R6yIg0LI/ywPhYeVlxo6WUoK8fiL/i3eNd57Jgv5YQ6ly+
ZyqH8w1m0kE4IkIiTFgmIpvepiWLBCA3mPOfHfE3QxbDKpXe4uFsMdnxghmP5bFN
3H9syJQNFqjs+ooKma/fE2VmpxQ5/5lAs0/ms+ECW3GvBseTll8Iln7y4NwgAQ==
=ITwD
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org:/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"Here are the patches we've accumulated for GFS2 for the current
upstream merge window. We have a good mixture this time. Here are
some of the features:
- Fix a problem with RO mounts writing to the journal.
- Further improvements to quotas on GFS2.
- Added support for rename2 and RENAME_EXCHANGE on GFS2.
- Increase performance by making glock lru_list less of a bottleneck.
- Increase performance by avoiding unnecessary buffer_head releases.
- Increase performance by using average glock round trip time from all CPUs.
- Fixes for some compiler warnings and minor white space issues.
- Other misc bug fixes"
* tag 'gfs2-merge-window' of git://git.kernel.org:/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Don't brelse rgrp buffer_heads every allocation
GFS2: Don't add all glocks to the lru
gfs2: Don't support fallocate on jdata files
gfs2: s64 cast for negative quota value
gfs2: limit quota log messages
gfs2: fix quota updates on block boundaries
gfs2: fix shadow warning in gfs2_rbm_find()
gfs2: kerneldoc warning fixes
gfs2: convert simple_str to kstr
GFS2: make sure S_NOSEC flag isn't overwritten
GFS2: add support for rename2 and RENAME_EXCHANGE
gfs2: handle NULL rgd in set_rgrp_preferences
GFS2: inode.c: indent with TABs, not spaces
GFS2: mark the journal idle to fix ro mounts
GFS2: Average in only non-zero round-trip times for congestion stats
GFS2: Use average srttb value in congestion calculations
Pull cgroup writeback support from Jens Axboe:
"This is the big pull request for adding cgroup writeback support.
This code has been in development for a long time, and it has been
simmering in for-next for a good chunk of this cycle too. This is one
of those problems that has been talked about for at least half a
decade, finally there's a solution and code to go with it.
Also see last weeks writeup on LWN:
http://lwn.net/Articles/648292/"
* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
writeback, blkio: add documentation for cgroup writeback support
vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
writeback: do foreign inode detection iff cgroup writeback is enabled
v9fs: fix error handling in v9fs_session_init()
bdi: fix wrong error return value in cgwb_create()
buffer: remove unusued 'ret' variable
writeback: disassociate inodes from dying bdi_writebacks
writeback: implement foreign cgroup inode bdi_writeback switching
writeback: add lockdep annotation to inode_to_wb()
writeback: use unlocked_inode_to_wb transaction in inode_congested()
writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
writeback: implement [locked_]inode_to_wb_and_lock_list()
writeback: implement foreign cgroup inode detection
writeback: make writeback_control track the inode being written back
writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
writeback: implement memcg writeback domain based throttling
writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
writeback: implement memcg wb_domain
writeback: update wb_over_bg_thresh() to use wb_domain aware operations
...
This patch allows the block allocation code to retain the buffers
for the resource groups so they don't need to be re-read from buffer
cache with every request. This is a performance improvement that's
especially noticeable when resource groups are very large. For
example, with 2GB resource groups and 4K blocks, there can be 33
blocks for every resource group. This patch allows those 33 buffers
to be kept around and not read in and thrown away with every
operation. The buffers are released when the resource group is
either synced or invalidated.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
The glocks used for resource groups often come and go hundreds of
thousands of times per second. Adding them to the lru list just
adds unnecessary contention for the lru_lock spin_lock, especially
considering we're almost certainly going to re-use the glock and
take it back off the lru microseconds later. We never want the
glock shrinker to cull them anyway. This patch adds a new bit in
the glops that determines which glock types get put onto the lru
list and which ones don't.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
We cannot provide an efficient implementation due to the headers
on the data blocks, so there doesn't seem much point in having it.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
One-line fix to cast quota value to s64 before comparison.
By default the quantity is treated as u64.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
This patch makes the quota subsystem only report once that a
particular user/group has exceeded their allotted quota.
Previously, it was possible for a program to continuously try
exceeding quota (despite receiving EDQUOT) and in turn trigger
gfs2 to issue a kernel log message about quota exceed. In theory,
this could get out of hand and flood the log and the filesystem
hosting the log files.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
For smaller block sizes (512B, 1K, 2K), some quotas straddle block
boundaries such that the usage value is on one block and the rest
of the quota is on the previous block. In such cases, the value
does not get updated correctly. This patch fixes that by addressing
the boundary conditions correctly.
This patch also adds a (s64) cast that was missing in a call to
gfs2_quota_change() in inode.c
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear. For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi. To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.
This patch moves bandwidth related fields from backing_dev_info into
bdi_writeback.
* The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp,
write_bandwidth, avg_write_bandwidth, dirty_ratelimit,
balanced_dirty_ratelimit, completions and dirty_exceeded.
* writeback_chunk_size() and over_bground_thresh() now take @wb
instead of @bdi.
* bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...)
bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...)
bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...)
bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...)
[__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...)
bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...)
bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...)
* Init/exits of the relocated fields are moved to bdi_wb_init/exit()
respectively. Note that explicit zeroing is dropped in the process
as wb's are cleared in entirety anyway.
* As there's still only one bdi_writeback per backing_dev_info, all
uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
introducing no behavior changes.
v2: Typo in description fixed as suggested by Jan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
bi was already declared and initialized globally in gfs2_rbm_find()
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
a) instead of storing the symlink body (via nd_set_link()) and returning
an opaque pointer later passed to ->put_link(), ->follow_link() _stores_
that opaque pointer (into void * passed by address by caller) and returns
the symlink body. Returning ERR_PTR() on error, NULL on jump (procfs magic
symlinks) and pointer to symlink body for normal symlinks. Stored pointer
is ignored in all cases except the last one.
Storing NULL for opaque pointer (or not storing it at all) means no call
of ->put_link().
b) the body used to be passed to ->put_link() implicitly (via nameidata).
Now only the opaque pointer is. In the cases when we used the symlink body
to free stuff, ->follow_link() now should store it as opaque pointer in addition
to returning it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes the following kernel-doc warnings:
Warning(fs/gfs2/aops.c:180): No description found for parameter 'wbc'
Warning(fs/gfs2/aops.c:236): No description found for parameter 'end'
Warning(fs/gfs2/aops.c:236): No description found for parameter 'done_index'
Warning(fs/gfs2/aops.c:236): Excess function parameter 'writepage' description in 'gfs2_write_jdata_pagevec'
Warning(fs/gfs2/aops.c:346): Excess function parameter 'writepage' description in 'gfs2_write_cache_jdata'
Warning(fs/gfs2/aops.c:346): Excess function parameter 'data' description in 'gfs2_write_cache_jdata'
Warning(fs/gfs2/aops.c:605): No description found for parameter 'file'
Warning(fs/gfs2/aops.c:605): No description found for parameter 'mapping'
Warning(fs/gfs2/aops.c:605): No description found for parameter 'pages'
Warning(fs/gfs2/aops.c:605): No description found for parameter 'nr_pages'
Warning(fs/gfs2/aops.c:870): No description found for parameter 'copied'
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
-Remove obsolete simple_str functions.
-Return error code when kstr failed.
-This patch also calls functions corresponding to destination type.
Thanks to Alexey Dobriyan for suggesting improvements in
block_store() and wdack_store()
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
At the end of gfs2_set_inode_flags inode->i_flags is set to flags, so
we should be modifying flags instead of inode->i_flags, so it isn't
overwritten.
Signed-off-by: Benjamin Marzinski <bmarzins redhat com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
gfs2 now uses the rename2 directory iop, and supports the
RENAME_EXCHANGE flag (as well as RENAME_NOREPLACE, which the vfs
takes care of).
Signed-off-by: Benjamin Marzinski <bmarzins redhat com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The function set_rgrp_preferences() does not handle the (rarely
returned) NULL value from gfs2_rgrpd_get_next() and this patch
fixes that.
The fs image in question is only 150MB in size which allows for
only 1 rgrp to be created. The in-memory rb tree has only 1 node
and when gfs2_rgrpd_get_next() is called on this sole rgrp, it
returns NULL. (Default behavior is to wrap around the rb tree and
return the first node to give the illusion of a circular linked
list. In the case of only 1 rgrp, we can't have
gfs2_rgrpd_get_next() return the same rgrp (first, last, next all
point to the same rgrp)... that would cause unintended consequences
and infinite loops.)
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Follow the same style used for the other functions in the same file.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When gfs2 was mounted read-only and then unmounted, it was writing a
header block to the journal in the syncing gfs2_log_flush() call from
kill_sb(). This is because the journal was not being marked as idle
until the first log header was written out, and on a read-only mount
there never was a log header written out. Since the journal was not
marked idle, gfs2_log_flush() was writing out a header lock to make
sure it was empty during the sync. Not only did this cause IO to a
read-only filesystem, but the journalling isn't completely initialized
on read-only mounts, and so gfs2 was writing out the wrong sequence
number in the log header.
Now, the journal is marked idle on mount, and gfs2_log_flush() won't
write out anything until there starts being transactions to flush.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
This patch changes function gfs2_rgrp_congested so that it only factors
in non-zero values into its average round trip time. If the round-trip
time is zero for a particular cpu, that cpu has obviously never dealt
with bouncing the resource group in question, so factoring in a zero
value will only skew the numbers. It also fixes a compile error on
some arches related to division.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
This patch changes function gfs2_rgrp_congested so that it uses an
average srttb (smoothed round trip time for blocking rgrp glocks)
rather than the CPU-specific value. If we use the CPU-specific value
it can incorrectly report no contention when there really is contention
due to the glock processing occurring on a different CPU.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Pull third hunk of vfs changes from Al Viro:
"This contains the ->direct_IO() changes from Omar + saner
generic_write_checks() + dealing with fcntl()/{read,write}() races
(mirroring O_APPEND/O_DIRECT into iocb->ki_flags and instead of
repeatedly looking at ->f_flags, which can be changed by fcntl(2),
check ->ki_flags - which cannot) + infrastructure bits for dhowells'
d_inode annotations + Christophs switch of /dev/loop to
vfs_iter_write()"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (30 commits)
block: loop: switch to VFS ITER_BVEC
configfs: Fix inconsistent use of file_inode() vs file->f_path.dentry->d_inode
VFS: Make pathwalk use d_is_reg() rather than S_ISREG()
VFS: Fix up debugfs to use d_is_dir() in place of S_ISDIR()
VFS: Combine inode checks with d_is_negative() and d_is_positive() in pathwalk
NFS: Don't use d_inode as a variable name
VFS: Impose ordering on accesses of d_inode and d_flags
VFS: Add owner-filesystem positive/negative dentry checks
nfs: generic_write_checks() shouldn't be done on swapout...
ocfs2: use __generic_file_write_iter()
mirror O_APPEND and O_DIRECT into iocb->ki_flags
switch generic_write_checks() to iocb and iter
ocfs2: move generic_write_checks() before the alignment checks
ocfs2_file_write_iter: stop messing with ppos
udf_file_write_iter: reorder and simplify
fuse: ->direct_IO() doesn't need generic_write_checks()
ext4_file_write_iter: move generic_write_checks() up
xfs_file_aio_write_checks: switch to iocb/iov_iter
generic_write_checks(): drop isblk argument
blkdev_write_iter: expand generic_file_checks() call in there
...
Pull quota and udf updates from Jan Kara:
"The pull contains quota changes which complete unification of XFS and
VFS quota interfaces (so tools can use either interface to manipulate
any filesystem). There's also a patch to support project quotas in
VFS quota subsystem from Li Xi.
Finally there's a bunch of UDF fixes and cleanups and tiny cleanup in
reiserfs & ext3"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (21 commits)
udf: Update ctime and mtime when directory is modified
udf: return correct errno for udf_update_inode()
ext3: Remove useless condition in if statement.
vfs: Add general support to enforce project quota limits
reiserfs: fix __RASSERT format string
udf: use int for allocated blocks instead of sector_t
udf: remove redundant buffer_head.h includes
udf: remove else after return in __load_block_bitmap()
udf: remove unused variable in udf_table_free_blocks()
quota: Fix maximum quota limit settings
quota: reorder flags in quota state
quota: paranoia: check quota tree root
quota: optimize i_dquot access
quota: Hook up Q_XSETQLIM for id 0 to ->set_info
xfs: Add support for Q_SETINFO
quota: Make ->set_info use structure with neccesary info to VFS and XFS
quota: Remove ->get_xstate and ->get_xstatev callbacks
gfs2: Convert to using ->get_state callback
xfs: Convert to using ->get_state callback
quota: Wire up Q_GETXSTATE and Q_GETXSTATV calls to work with ->get_state
...
Pull second vfs update from Al Viro:
"Now that net-next went in... Here's the next big chunk - killing
->aio_read() and ->aio_write().
There'll be one more pile today (direct_IO changes and
generic_write_checks() cleanups/fixes), but I'd prefer to keep that
one separate"
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
->aio_read and ->aio_write removed
pcm: another weird API abuse
infinibad: weird APIs switched to ->write_iter()
kill do_sync_read/do_sync_write
fuse: use iov_iter_get_pages() for non-splice path
fuse: switch to ->read_iter/->write_iter
switch drivers/char/mem.c to ->read_iter/->write_iter
make new_sync_{read,write}() static
coredump: accept any write method
switch /dev/loop to vfs_iter_write()
serial2002: switch to __vfs_read/__vfs_write
ashmem: use __vfs_read()
export __vfs_read()
autofs: switch to __vfs_write()
new helper: __vfs_write()
switch hugetlbfs to ->read_iter()
coda: switch to ->read_iter/->write_iter
ncpfs: switch to ->read_iter/->write_iter
net/9p: remove (now-)unused helpers
p9_client_attach(): set fid->uid correctly
...
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Here is a list of patches we've accumulated for GFS2 for the current upstream
merge window. Most of the patches fix GFS2 quotas, which were not properly
enforced. There's another that adds me as a GFS2 co-maintainer, and a
couple patches that fix a kernel panic doing splice_write on GFS2 as well
as a few correctness patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVLTjHAAoJENeLYdPf93o7QdsIAIvnyE4HFXct/OjsjNdhkf9o
vY20tnSDfFwySlsGa1ZvI8H8VX5SFzbJgHLFNSuLQqB8L5tN5unlLT+tNyjIGKlp
mW34RU7f7oFFmAxhb+gTUJYY7WhQK0GEvrwcILJxNXvNUhVxufArGwKWO9XWoMcU
rLlwpWQvmMLzgXCLXEUDJXy442Hv78r5b7BSxFwGYjq4ak6MSPqQ38KwPFcq3e5d
gH3IpWIefwPSStV7CpuZwSrPJ344a2GZRVQNboe/K2qhyDiAiOwxHCFz3X8e1u7G
SX+SV6dO4C9MLeovUbLYfFQ1Y8tLtceQpzRDb0cu6UJvLJ3dDl2ZOa9OOMKmk4M=
=l/IT
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"Here is a list of patches we've accumulated for GFS2 for the current
upstream merge window.
Most of the patches fix GFS2 quotas, which were not properly enforced.
There's another that adds me as a GFS2 co-maintainer, and a couple
patches that fix a kernel panic doing splice_write on GFS2 as well as
a few correctness patches"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: fix quota refresh race in do_glock()
gfs2: incorrect check for debugfs returns
gfs2: allow fallocate to max out quotas/fs efficiently
gfs2: allow quota_check and inplace_reserve to return available blocks
gfs2: perform quota checks against allocation parameters
GFS2: Move gfs2_file_splice_write outside of #ifdef
GFS2: Allocate reservation during splice_write
GFS2: gfs2_set_acl(): Cache "no acl" as well
Add myself (Bob Peterson) as a maintainer of GFS2
The rw parameter to direct_IO is redundant with iov_iter->type, and
treated slightly differently just about everywhere it's used: some users
do rw & WRITE, and others do rw == WRITE where they should be doing a
bitwise check. Simplify this with the new iov_iter_rw() helper, which
always returns either READ or WRITE.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Most filesystems call through to these at some point, so we'll start
here.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
quotad periodically syncs in-memory quotas to the ondisk quota file
and sets the QDF_REFRESH flag so that a subsequent read of a synced
quota is re-read from disk.
gfs2_quota_lock() checks for this flag and sets a 'force' bit to
force re-read from disk if requested. However, there is a race
condition here. It is possible for gfs2_quota_lock() to find the
QDF_REFRESH flag unset (i.e force=0) and quotad comes in immediately
after and syncs the relevant quota and sets the QDF_REFRESH flag.
gfs2_quota_lock() resumes with force=0 and uses the stale in-memory
quota usage values that result in miscalculations.
This patch fixes this race by moving the check for the QDF_REFRESH
flag check further out into the gfs2_quota_lock() process, i.e, in
do_glock(), under the protection of the quota glock.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
debugfs_create_dir and debugfs_create_file may return -ENODEV when debugfs
is not configured, so the return value should be checked against ERROR_VALUE
as well, otherwise the later dereference of the dentry pointer would crash
the kernel.
Signed-off-by: Chengyu Song <csong84@gatech.edu>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We can quickly get an estimate of how many blocks are available
for allocation restricted by quota and fs size respectively, using
the ap->allowed field in the gfs2_alloc_parms structure.
gfs2_quota_check() and gfs2_inplace_reserve() provide these values.
Once we have the total number of blocks available to us, we can
compute how many bytes of data can be written using those blocks
instead of guessing inefficiently.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
struct gfs2_alloc_parms is passed to gfs2_quota_check() and
gfs2_inplace_reserve() with ap->target containing the number of
blocks being requested for allocation in the current operation.
We add a new field to struct gfs2_alloc_parms called 'allowed'.
gfs2_quota_check() and gfs2_inplace_reserve() return the max
blocks allowed by quota and the max blocks allowed by the chosen
rgrp respectively in 'allowed'.
A new field 'min_target', when non-zero, tells gfs2_quota_check()
and gfs2_inplace_reserve() to not return -EDQUOT/-ENOSPC when
there are atleast 'min_target' blocks allowable/available. The
assumption is that the caller is ok with just 'min_target' blocks
and will likely proceed with allocating them.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Use struct gfs2_alloc_parms as an argument to gfs2_quota_check()
and gfs2_quota_lock_check() to check for quota violations while
accounting for the new blocks requested by the current operation
in ap->target.
Previously, the number of new blocks requested during an operation
were not accounted for during quota_check and would allow these
operations to exceed quota. This was not very apparent since most
operations allocated only 1 block at a time and quotas would get
violated in the next operation. i.e. quota excess would only be by
1 block or so. With fallocate, (where we allocate a bunch of blocks
at once) the quota excess is non-trivial and is addressed by this
patch.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
This patch moves function gfs2_file_splice_write so it's not
conditionally compiled.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds a GFS2-specific function for splice_write which
first calls function gfs2_rs_alloc to make sure a reservation
structure has been allocated before attempting to reserve blocks.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
When removing a default acl or setting an access acl that is entirely
represented in the file mode, we end up with acl == NULL in gfs2_set_acl(). In
that case, bring gfs2 in line with other file systems and cache the NULL acl
with set_cached_acl() instead of invalidating the cache with
forget_cached_acl().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Convert the following where appropriate:
(1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).
(2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).
(3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more
complicated than it appears as some calls should be converted to
d_can_lookup() instead. The difference is whether the directory in
question is a real dir with a ->lookup op or whether it's a fake dir with
a ->d_automount op.
In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).
Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer. In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.
However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.
There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was
intended for special directory entry types that don't have attached inodes.
The following perl+coccinelle script was used:
use strict;
my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
print "No matches\n";
exit(0);
}
my @cocci = (
'@@',
'expression E;',
'@@',
'',
'- S_ISLNK(E->d_inode->i_mode)',
'+ d_is_symlink(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISDIR(E->d_inode->i_mode)',
'+ d_is_dir(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISREG(E->d_inode->i_mode)',
'+ d_is_reg(E)' );
my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);
foreach my $file (@callers) {
chomp $file;
print "Processing ", $file, "\n";
system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
die "spatch failed";
}
[AV: overlayfs parts skipped]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull lazytime mount option support from Al Viro:
"Lazytime stuff from tytso"
* 'lazytime' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ext4: add optimization for the lazytime mount option
vfs: add find_inode_nowait() function
vfs: add support for a lazytime mount option
Merge third set of updates from Andrew Morton:
- the rest of MM
[ This includes getting rid of the numa hinting bits, in favor of
just generic protnone logic. Yay. - Linus ]
- core kernel
- procfs
- some of lib/ (lots of lib/ material this time)
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (104 commits)
lib/lcm.c: replace include
lib/percpu_ida.c: remove redundant includes
lib/strncpy_from_user.c: replace module.h include
lib/stmp_device.c: replace module.h include
lib/sort.c: move include inside #if 0
lib/show_mem.c: remove redundant include
lib/radix-tree.c: change to simpler include
lib/plist.c: remove redundant include
lib/nlattr.c: remove redundant include
lib/kobject_uevent.c: remove redundant include
lib/llist.c: remove redundant include
lib/md5.c: simplify include
lib/list_sort.c: rearrange includes
lib/genalloc.c: remove redundant include
lib/idr.c: remove redundant include
lib/halfmd4.c: simplify includes
lib/dynamic_queue_limits.c: simplify includes
lib/sort.c: use simpler includes
lib/interval_tree.c: simplify includes
hexdump: make it return number of bytes placed in buffer
...
Currently, the isolate callback passed to the list_lru_walk family of
functions is supposed to just delete an item from the list upon returning
LRU_REMOVED or LRU_REMOVED_RETRY, while nr_items counter is fixed by
__list_lru_walk_one after the callback returns. Since the callback is
allowed to drop the lock after removing an item (it has to return
LRU_REMOVED_RETRY then), the nr_items can be less than the actual number
of elements on the list even if we check them under the lock. This makes
it difficult to move items from one list_lru_one to another, which is
required for per-memcg list_lru reparenting - we can't just splice the
lists, we have to move entries one by one.
This patch therefore introduces helpers that must be used by callback
functions to isolate items instead of raw list_del/list_move. These are
list_lru_isolate and list_lru_isolate_move. They not only remove the
entry from the list, but also fix the nr_items counter, making sure
nr_items always reflects the actual number of elements on the list if
checked under the appropriate lock.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kmem accounting of memcg is unusable now, because it lacks slab shrinker
support. That means when we hit the limit we will get ENOMEM w/o any
chance to recover. What we should do then is to call shrink_slab, which
would reclaim old inode/dentry caches from this cgroup. This is what
this patch set is intended to do.
Basically, it does two things. First, it introduces the notion of
per-memcg slab shrinker. A shrinker that wants to reclaim objects per
cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be
passed the memory cgroup to scan from in shrink_control->memcg. For
such shrinkers shrink_slab iterates over the whole cgroup subtree under
the target cgroup and calls the shrinker for each kmem-active memory
cgroup.
Secondly, this patch set makes the list_lru structure per-memcg. It's
done transparently to list_lru users - everything they have to do is to
tell list_lru_init that they want memcg-aware list_lru. Then the
list_lru will automatically distribute objects among per-memcg lists
basing on which cgroup the object is accounted to. This way to make FS
shrinkers (icache, dcache) memcg-aware we only need to make them use
memcg-aware list_lru, and this is what this patch set does.
As before, this patch set only enables per-memcg kmem reclaim when the
pressure goes from memory.limit, not from memory.kmem.limit. Handling
memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and
it is still unclear whether we will have this knob in the unified
hierarchy.
This patch (of 9):
NUMA aware slab shrinkers use the list_lru structure to distribute
objects coming from different NUMA nodes to different lists. Whenever
such a shrinker needs to count or scan objects from a particular node,
it issues commands like this:
count = list_lru_count_node(lru, sc->nid);
freed = list_lru_walk_node(lru, sc->nid, isolate_func,
isolate_arg, &sc->nr_to_scan);
where sc is an instance of the shrink_control structure passed to it
from vmscan.
To simplify this, let's add special list_lru functions to be used by
shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which
consolidate the nid and nr_to_scan arguments in the shrink_control
structure.
This will also allow us to avoid patching shrinkers that use list_lru
when we make shrink_slab() per-memcg - all we will have to do is extend
the shrink_control structure to include the target memcg and make
list_lru_shrink_{count,walk} handle this appropriately.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull backing device changes from Jens Axboe:
"This contains a cleanup of how the backing device is handled, in
preparation for a rework of the life time rules. In this part, the
most important change is to split the unrelated nommu mmap flags from
it, but also removing a backing_dev_info pointer from the
address_space (and inode), and a cleanup of other various minor bits.
Christoph did all the work here, I just fixed an oops with pages that
have a swap backing. Arnd fixed a missing export, and Oleg killed the
lustre backing_dev_info from staging. Last patch was from Al,
unexporting parts that are now no longer needed outside"
* 'for-3.20/bdi' of git://git.kernel.dk/linux-block:
Make super_blocks and sb_lock static
mtd: export new mtd_mmap_capabilities
fs: make inode_to_bdi() handle NULL inode
staging/lustre/llite: get rid of backing_dev_info
fs: remove default_backing_dev_info
fs: don't reassign dirty inodes to default_backing_dev_info
nfs: don't call bdi_unregister
ceph: remove call to bdi_unregister
fs: remove mapping->backing_dev_info
fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
nilfs2: set up s_bdi like the generic mount_bdev code
block_dev: get bdev inode bdi directly from the block device
block_dev: only write bdev inode on close
fs: introduce f_op->mmap_capabilities for nommu mmap support
fs: kill BDI_CAP_SWAP_BACKED
fs: deduplicate noop_backing_dev_info
Merge misc updates from Andrew Morton:
"Bite-sized chunks this time, to avoid the MTA ratelimiting woes.
- fs/notify updates
- ocfs2
- some of MM"
That laconic "some MM" is mainly the removal of remap_file_pages(),
which is a big simplification of the VM, and which gets rid of a *lot*
of random cruft and special cases because we no longer support the
non-linear mappings that it used.
From a user interface perspective, nothing has changed, because the
remap_file_pages() syscall still exists, it's just done by emulating the
old behavior by creating a lot of individual small mappings instead of
one non-linear one.
The emulation is slower than the old "native" non-linear mappings, but
nobody really uses or cares about remap_file_pages(), and simplifying
the VM is a big advantage.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (78 commits)
memcg: zap memcg_slab_caches and memcg_slab_mutex
memcg: zap memcg_name argument of memcg_create_kmem_cache
memcg: zap __memcg_{charge,uncharge}_slab
mm/page_alloc.c: place zone_id check before VM_BUG_ON_PAGE check
mm: hugetlb: fix type of hugetlb_treat_as_movable variable
mm, hugetlb: remove unnecessary lower bound on sysctl handlers"?
mm: memory: merge shared-writable dirtying branches in do_wp_page()
mm: memory: remove ->vm_file check on shared writable vmas
xtensa: drop _PAGE_FILE and pte_file()-related helpers
x86: drop _PAGE_FILE and pte_file()-related helpers
unicore32: drop pte_file()-related helpers
um: drop _PAGE_FILE and pte_file()-related helpers
tile: drop pte_file()-related helpers
sparc: drop pte_file()-related helpers
sh: drop _PAGE_FILE and pte_file()-related helpers
score: drop _PAGE_FILE and pte_file()-related helpers
s390: drop pte_file()-related helpers
parisc: drop _PAGE_FILE and pte_file()-related helpers
openrisc: drop _PAGE_FILE and pte_file()-related helpers
nios2: drop _PAGE_FILE and pte_file()-related helpers
...
relating to ACLs, and another which improves (but does not fix entirely) an
allocation fall-back code path. The other three patches are small clean
ups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=CiRw
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull gfs2 updates from Steven Whitehouse:
"This time we have mostly clean ups. There is a bug fix for a NULL
dereference relating to ACLs, and another which improves (but does not
fix entirely) an allocation fall-back code path. The other three
patches are small clean ups"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Fix crash during ACL deletion in acl max entry check in gfs2_set_acl()
GFS2: use __vmalloc GFP_NOFS for fs-related allocations.
GFS2: Eliminate a nonsense goto
GFS2: fix sprintf format specifier
GFS2: Eliminate __gfs2_glock_remove_from_lru
Fixes: e01580bf9e ("gfs2: use generic posix ACL infrastructure")
Reported-by: Eric Meddaugh <etmsys@rit.edu>
Tested-by: Eric Meddaugh <etmsys@rit.edu>
Signed-off-by: Andrew Elble <aweits@rit.edu>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Add a new mount option which enables a new "lazytime" mode. This mode
causes atime, mtime, and ctime updates to only be made to the
in-memory version of the inode. The on-disk times will only get
updated when (a) if the inode needs to be updated for some non-time
related change, (b) if userspace calls fsync(), syncfs() or sync(), or
(c) just before an undeleted inode is evicted from memory.
This is OK according to POSIX because there are no guarantees after a
crash unless userspace explicitly requests via a fsync(2) call.
For workloads which feature a large number of random write to a
preallocated file, the lazytime mount option significantly reduces
writes to the inode table. The repeated 4k writes to a single block
will result in undesirable stress on flash devices and SMR disk
drives. Even on conventional HDD's, the repeated writes to the inode
table block will trigger Adjacent Track Interference (ATI) remediation
latencies, which very negatively impact long tail latencies --- which
is a very big deal for web serving tiers (for example).
Google-Bug-Id: 18297052
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
leaf_dealloc uses vzalloc as a fallback to kzalloc(GFP_NOFS), so
it clearly does not want any shrinker activity within the fs itself.
convert vzalloc into __vmalloc(GFP_NOFS|__GFP_ZERO) to better achieve
this goal.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Currently ->get_dqblk() and ->set_dqblk() use struct fs_disk_quota which
tracks space limits and usage in 512-byte blocks. However VFS quotas
track usage in bytes (as some filesystems require that) and we need to
somehow pass this information. Upto now it wasn't a problem because we
didn't do any unit conversion (thus VFS quota routines happily stuck
number of bytes into d_bcount field of struct fd_disk_quota). Only if
you tried to use Q_XGETQUOTA or Q_XSETQLIM for VFS quotas (or Q_GETQUOTA
/ Q_SETQUOTA for XFS quotas), you got bogus results. Hardly anyone
tried this but reportedly some Samba users hit the problem in practice.
So when we want interfaces compatible we need to fix this.
We bite the bullet and define another quota structure used for passing
information from/to ->get_dqblk()/->set_dqblk. It's somewhat sad we have
to have more conversion routines in fs/quota/quota.c and another copying
of quota structure slows down getting of quota information by about 2%
but it seems cleaner than overloading e.g. units of d_bcount to bytes.
CC: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
This patch just removes a goto that did nothing.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Now that we never use the backing_dev_info pointer in struct address_space
we can simply remove it and save 4 to 8 bytes in every inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that we got rid of the bdi abuse on character devices we can always use
sb->s_bdi to get at the backing_dev_info for a file, except for the block
device special case. Export inode_to_bdi and replace uses of
mapping->backing_dev_info with it to prepare for the removal of
mapping->backing_dev_info.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Sprintf format specifier "%d" and "%u" are mixed up in
gfs2_recovery_done() and freeze_show(). So correct them.
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since the only caller of function __gfs2_glock_remove_from_lru locks the
same spin_lock as gfs2_glock_remove_from_lru, the functions can be combined.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Pull VFS changes from Al Viro:
"First pile out of several (there _definitely_ will be more). Stuff in
this one:
- unification of d_splice_alias()/d_materialize_unique()
- iov_iter rewrite
- killing a bunch of ->f_path.dentry users (and f_dentry macro).
Getting that completed will make life much simpler for
unionmount/overlayfs, since then we'll be able to limit the places
sensitive to file _dentry_ to reasonably few. Which allows to have
file_inode(file) pointing to inode in a covered layer, with dentry
pointing to (negative) dentry in union one.
Still not complete, but much closer now.
- crapectomy in lustre (dead code removal, mostly)
- "let's make seq_printf return nothing" preparations
- assorted cleanups and fixes
There _definitely_ will be more piles"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
copy_from_iter_nocache()
new helper: iov_iter_kvec()
csum_and_copy_..._iter()
iov_iter.c: handle ITER_KVEC directly
iov_iter.c: convert copy_to_iter() to iterate_and_advance
iov_iter.c: convert copy_from_iter() to iterate_and_advance
iov_iter.c: get rid of bvec_copy_page_{to,from}_iter()
iov_iter.c: convert iov_iter_zero() to iterate_and_advance
iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds
iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds
iov_iter.c: convert iov_iter_npages() to iterate_all_kinds
iov_iter.c: iterate_and_advance
iov_iter.c: macros for iterating over iov_iter
kill f_dentry macro
dcache: fix kmemcheck warning in switch_names
new helper: audit_file()
nfsd_vfs_write(): use file_inode()
ncpfs: use file_inode()
kill f_dentry uses
lockd: get rid of ->f_path.dentry->d_sb
...
Pull quota updates from Jan Kara:
"Quota improvements and some minor cleanups.
The main portion in the pull request are changes which move i_dquot
array from struct inode into fs-private part of an inode which saves
memory for filesystems which don't use VFS quotas"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: One function call less in udf_fill_super() after error detection
udf: Deletion of unnecessary checks before the function call "iput"
jbd: Deletion of an unnecessary check before the function call "iput"
vfs: Remove i_dquot field from inode
jfs: Convert to private i_dquot field
reiserfs: Convert to private i_dquot field
ocfs2: Convert to private i_dquot field
ext4: Convert to private i_dquot field
ext3: Convert to private i_dquot field
ext2: Convert to private i_dquot field
quota: Use function to provide i_dquot pointers
xfs: Set allowed quota types
gfs2: Set allowed quota types
quota: Allow each filesystem to specify which quota types it supports
quota: Remove const from function declarations
quota: Add log level to printk
In ->atomic_open(inode, dentry, file, opened) calling finish_no_open(file, NULL)
is equivalent to dget(dentry); return finish_no_open(file, dentry);
No need to open-code that...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
vfree() is allowed under spinlock these days, but it's cheaper when
it doesn't step into deferred case and here it's very easy to avoid.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
dentry is always hashed and negative, inode - non-error, non-NULL and
non-directory. In such conditions d_splice_alias() is equivalent to
"d_instantiate(dentry, inode) and return NULL", which simplifies the
downstream code and is consistent with the "have to create a new object"
case.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
In ->atomic_open(inode, dentry, file, opened) calling finish_no_open(file, NULL)
is equivalent to dget(dentry); return finish_no_open(file, dentry);
No need to open-code that...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
dentry is always hashed and negative, inode - non-error, non-NULL and
non-directory. In such conditions d_splice_alias() is equivalent to
"d_instantiate(dentry, inode) and return NULL", which simplifies the
downstream code and is consistent with the "have to create a new object"
case.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The functions iput() and put_pid() test whether their argument is NULL
and then return immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The current gfs2 freezing code is considerably more complicated than it
should be because it doesn't use the vfs freezing code on any node except
the one that begins the freeze. This is because it needs to acquire a
cluster glock before calling the vfs code to prevent a deadlock, and
without the new freeze_super and thaw_super hooks, that was impossible. To
deal with the issue, gfs2 had to do some hacky locking tricks to make sure
that a frozen node couldn't be holding on a lock it needed to do the
unfreeze ioctl.
This patch makes use of the new hooks to simply the gfs2 locking code. Now,
all the nodes in the cluster freeze and thaw in exactly the same way. Every
node in the cluster caches the freeze glock in the shared state. The new
freeze_super hook allows the freezing node to grab this freeze glock in
the exclusive state without first calling the vfs freeze_super function.
All the nodes in the cluster see this lock change, and call the vfs
freeze_super function. The vfs locking code guarantees that the nodes can't
get stuck holding the glocks necessary to unfreeze the system. To
unfreeze, the freezing node uses the new thaw_super hook to drop the freeze
glock. Again, all the nodes notice this, reacquire the glock in shared mode
and call the vfs thaw_super function.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
gfs2_fallocate() wasn't updating ctime and mtime when modifying the
inode. Add a call to file_update_time() to do that.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This addresses an issue caught by fsx where the inode size was not being
updated to the expected value after fallocate(2) with mode 0.
The problem was caused by the offset and len parameters being converted
to multiples of the file system's block size, so i_size would be rounded
up to the nearest block size multiple instead of the requested size.
This replaces the per-chunk i_size updates with a single i_size_write on
successful completion of the operation. With this patch gfs2 gets
through a complete run of fsx.
For clarity, the check for (error == 0) following the loop is removed as
all failures before that point jump to out_* labels or return.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
gfs2_fallocate wasn't checking inode_newsize_ok nor get_write_access.
Split out the context setup and inode locking pieces into a separate
function to make it more clear and add these missing calls.
inode_newsize_ok is called conditional on FALLOC_FL_KEEP_SIZE as there
is no need to enforce a file size limit if it isn't going to change.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We support user and group quotas. Tell vfs about it.
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
CC: cluster-devel@redhat.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
If we run out of blocks for a given multi-block allocation, we obviously
did not reserve enough. We should reserve more blocks for the next
reservation to reduce fragmentation. This patch increases the size hint
for reservations when they run out.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
If an application does a sequence of (1) big write, (2) little write
we don't necessarily want to reset the size hint based on the smaller
size. The fact that they did any big writes implies they may do more,
and therefore we should try to allocate bigger block reservations, even
if the last few were small writes. Therefore this patch changes function
gfs2_size_hint so that the size hint can only grow; it cannot shrink.
This is especially important where there are multiple writers.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Denys Vlasenko