Allow the return value of raw_init() trace event callback to bail us out
of creating a trace event file, in case we fail to register our
event.
Also, we plan to return -ENOSYS for syscall events that don't match any
syscalls listed in our arch tracing syscall table, we don't want to warn
in that case, we just want this event to be invisible in debugfs and
ignored.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
If we disable modules, we get the following warning in ftrace events
file:
kernel/trace/trace_events.c:912: attention : ‘remove_subsystem_dir’ defined but not used
remove_subystem_dir() is useless if !CONFIG_MODULES, then move it to
the appropriate #ifdef section of trace_events.c
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Not all tracepoints are created equal, in specific the ftrace
tracepoints are created with TRACE_EVENT_FORMAT() which does
not generate the needed bits to tie them into perf counters.
For those events, don't create the 'id' file and fail
->profile_enable when their ID is specified through other
means.
Reported-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1249497664.5890.4.camel@laptop>
[ v2: fix build error in the !CONFIG_EVENT_PROFILE case ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The current code will truncate the ftrace files contents if O_APPEND
is not set and the file is opened in write mode. This is incorrect.
It should only truncate the file if O_TRUNC is set. Otherwise
if one of these files is opened by a C program with fopen "r+",
it will incorrectly truncate the file.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove empty subsystem and its directory when module unload.
Before patch:
# rmmod trace-events-sample.ko
# ls sample
enable filter
After patch:
# rmmod trace-events-sample.ko
# ls sample
ls: cannot access sample: No such file or directory
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Tom Zanussi <tzanussi@gmail.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A55A8BE.9010707@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We already have ftrace= boot option, and this adds a similar
boot option for trace events, so allow trace events to be
enabled at boot, for boot debugging purpose.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A4ACE29.3010407@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While testing syscall tracepoints posted by Jason, I found 3 entries
were missing when reading available_events. The output size of
available_events is < 4 pages, which means we lost 1 entry per page.
The cause is, it's wrong to increment @pos in s_start().
Actually there's another bug here -- reading avaiable_events/set_events
can race with module unload:
# cat available_events |
s_start() |
s_stop() |
| # rmmod foo.ko
s_start() |
call = list_entry(m->private) |
@call might be freed and accessing it will lead to crash.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A4186DD.6090405@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When reading the trace buffer, there is a race that when a module
is unloaded it removes events that is stilled referenced in the buffers.
This patch adds the protection around the unloading of the events
from modules and the reading of the trace buffers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Always use ftrace_event_enable_disable() to enable/disable an event
so that we can factorize out the event toggling code.
[ Impact: factorize and cleanup event tracing code ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4A14FDFE.2080402@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
register_module_notifier() returns zero in the success case.
So fix the inverted fail case check in trace events modules
handler.
[ Impact: fix spurious warning on ftrace initialization]
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Other parts of the kernel may need to be able to enable or disable
specific events. Especially parts that create trace events.
[ Impact: allow enabling of trace events by those that create the event ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 8f31bfe538
tracing/events: clean up for ftrace_set_clr_event()
Moved out the code for ftrace_set_clr_event into a helper funciton but
did not initialize the return value. As a result, we do not warn about
a typo in the echoing of events in set_event.
This patch restores the old warning:
# echo foobar > set_event
-bash: echo: write error: Invalid argument
[ Impact: restore warning of invalid entries to set_event ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A smarter way to figure out the output of an enable file.
[ Impact: clean up ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A0399A5.2080603@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a helper function __ftrace_set_clr_event(), and replace some
ftrace_set_clr_event() calls with this helper, thus we don't need any
kstrdup() or kmalloc().
As a side effect, this patch fixes an issue in self tests code, which is
similar to the one fixed in commit d6bf81ef0f
("tracing: append ":*" to internal setting of system events")
It's a small issue and won't cause any bug in fact, but we should do things
right anyway.
[ Impact: prevent spurious event-enabling in tracing self-tests ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A03998E.3020503@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The system enabling of events uses the same code as the set_event file.
It passes in the name of the system to the parser and that will enable
all the events that has that system as a name.
The problem is that it will also enable events with the same name as the
system.
If you have system name foo, and system name bar, but within the system
bar, there exists an event called foo. By setting the system name foo,
you will also be enabling the event foo in the system bar. This is not
an expected result.
The solution is to pass in "foo:*", which will only enable the system
foo and not events called foo.
[ Impact: prevent accidental enabling of events with same name as a system ]
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the current event directory, you can only enable individual events.
The file debugfs/tracing/set_event is used to be able to enable or
disable several events at once. But that can still be awkward.
This patch adds hierarchical enabling of events. That is, each directory
in debugfs/tracing/events has an "enable" file. This file can enable
or disable all events within the directory and below.
# echo 1 > /debugfs/tracing/events/enable
will enable all events.
# echo 1 > /debugfs/tracing/events/sched/enable
will enable all events in the sched subsystem.
# echo 1 > /debugfs/tracing/events/enable
# echo 0 > /debugfs/tracing/events/irq/enable
will enable all events, but then disable just the irq subsystem events.
When reading one of these enable files, there are four results:
0 - all events this file affects are disabled
1 - all events this file affects are enabled
X - there is a mixture of events enabled and disabled
? - this file does not affect any event
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Li Zefan found that there's a race using the event ids of events and
modules. When a module is loaded, an event id is incremented. We only
have 16 bits for event ids (65536) and there is a possible (but highly
unlikely) race that we could load and unload a module that registers
events so many times that the event id counter overflows.
When it overflows, it then restarts and goes looking for available
ids. An id is available if it was added by a module and released.
The race is if you have one module add an id, and then is removed.
Another module loaded can use that same event id. But if the old module
still had events in the ring buffer, the new module's call back would
get bogus data. At best (and most likely) the output would just be
garbage. But if the module for some reason used pointers (not recommended)
then this could potentially crash.
The safest thing to do is just reset the ring buffer if a module that
registered events is removed.
[ Impact: prevent unpredictable results of event id overflows ]
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <49FEAFD0.30106@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A module will add/remove its trace events when it gets loaded/unloaded, so
the ftrace_events list is not "const", and concurrent access needs to be
protected.
This patch thus fixes races between loading/unloding modules and read
'available_events' or read/write 'set_event', etc.
Below shows how to reproduce the race:
# for ((; ;)) { cat /mnt/tracing/available_events; } > /dev/null &
# for ((; ;)) { insmod trace-events-sample.ko; rmmod sample; } &
After a while:
BUG: unable to handle kernel paging request at 0010011c
IP: [<c1080f27>] t_next+0x1b/0x2d
...
Call Trace:
[<c10c90e6>] ? seq_read+0x217/0x30d
[<c10c8ecf>] ? seq_read+0x0/0x30d
[<c10b4c19>] ? vfs_read+0x8f/0x136
[<c10b4fc3>] ? sys_read+0x40/0x65
[<c1002a68>] ? sysenter_do_call+0x12/0x36
[ Impact: fix races when concurrent accessing ftrace_events list ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4A00F709.3080800@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When unloading a module, memory allocated by init_preds() and
trace_define_field() is not freed.
[ Impact: fix memory leak ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4A00F6E0.3040503@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Replace the current event parser hack with a better one. Filters are
no longer specified predicate by predicate, but all at once and can
use parens and any of the following operators:
numeric fields:
==, !=, <, <=, >, >=
string fields:
==, !=
predicates can be combined with the logical operators:
&&, ||
examples:
"common_preempt_count > 4" > filter
"((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter
If there was an error, the erroneous string along with an error
message can be seen by looking at the filter e.g.:
((sig >= 10 && sig < 15) || dsig == 17) && comm != bash
^
parse_error: Field not found
Currently the caret for an error always appears at the beginning of
the filter; a real position should be used, but the error message
should be useful even without it.
To clear a filter, '0' can be written to the filter file.
Filters can also be set or cleared for a complete subsystem by writing
the same filter as would be written to an individual event to the
filter file at the root of the subsytem. Note however, that if any
event in the subsystem lacks a field specified in the filter being
set, the set will fail and all filters in the subsytem are
automatically cleared. This change from the previous version was made
because using only the fields that happen to exist for a given event
would most likely result in a meaningless filter.
Because the logical operators are now implemented as predicates, the
maximum number of predicates in a filter was increased from 8 to 16.
[ Impact: add new, extended trace-filter implementation ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905899.6416.121.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new filter comparison ops need to be able to distinguish between
signed and unsigned field types, so add an is_signed flag/param to the
event field struct/trace_define_fields(). Also define a simple macro,
is_signed_type() to determine the signedness at compile time, used in the
trace macros. If the is_signed_type() macro won't work with a specific
type, a new slightly modified version of TRACE_FIELD() called
TRACE_FIELD_SIGN(), allows the signedness to be set explicitly.
[ Impact: extend trace-filter code for new feature ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905893.6416.120.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create a new event_filter object, and move the pred-related members
out of the call and subsystem objects and into the filter object - the
details of the filter implementation don't need to be exposed in the
call and subsystem in any case, and it will also help make the new
parser implementation a little cleaner.
[ Impact: refactor trace-filter code to prepare for new features ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905887.6416.119.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For proper module reference counting, the file_operations that modules use
must have the "owner" field set to the module. Unfortunately, the trace events
use share file_operations. The same file_operations are used by all both
kernel core and all modules.
This patch makes the modules allocate their own file_operations and
copies the functions from the core kernel. This allows those file
operations to be owned by the module.
Care is taken to free this code on module unload.
Thanks to Greg KH for reminding me that file_operations must be owned
by the module to have reference counting take place.
[ Impact: fix modular tracepoints / potential crash ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
The events exported by TRACE_EVENT are automated and are guaranteed
to be correct when used.
The internal ftrace structures on the other hand are more manually
exported. These require the ftrace maintainer to make sure they
are up to date.
This patch adds a size check to help flag when a type changes in
an internal ftrace data structure, and the update needs to be reflected
in the export.
If a export is incorrect, then the only harm is that the user space
tools will not know how to correctly read the internal structures of
ftrace.
[ Impact: help prevent inconsistent ftrace format print outs ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
With the new event tracing registration, we must increase the number
of events that can be registered. Currently the type field is only
one byte, which leaves us only 256 possible events.
Since we do not save the CPU number in the tracer anymore (it is determined
by the per cpu ring buffer that is used) we have an extra byte to use.
This patch increases the size of type from 1 byte (256 events) to
2 bytes (65,536 events).
It also adds a WARN_ON_ONCE if we exceed that limit.
[ Impact: allow more than 255 events ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
struct trace_entry->type is unsigned char, while trace event's id is
int type, thus for a event with id >= 256, it's entry->type is cast
to (id % 256), and then we can't see the trace output of this event.
# insmod trace-events-sample.ko
# echo foo_bar > /mnt/tracing/set_event
# cat /debug/tracing/events/trace-events-sample/foo_bar/id
256
# cat /mnt/tracing/trace_pipe
<...>-3548 [001] 215.091142: Unknown type 0
<...>-3548 [001] 216.089207: Unknown type 0
<...>-3548 [001] 217.087271: Unknown type 0
<...>-3548 [001] 218.085332: Unknown type 0
[ Impact: fix output for trace events with id >= 256 ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <49EEDB0E.5070207@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If writing subsys->filter returns EINVAL or ENOSPC, the original
filters in subsys/ and subsys/events/ will be removed. This is
definitely wrong.
[ Impact: fix filter setting semantics on error condition ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <49ED8DD2.2070700@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The startup tests for the event tracer also runs with the function
tracer enabled. The "wakeup" version of the trace commit was used
which can grab spinlocks. If a task was preempted by an NMI
that called a function being traced, it could deadlock due to the
function tracer trying to grab the same lock.
Thanks to Frederic Weisbecker for pointing out where the bug was.
Reported-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The late_initcall calls a helper function instead of the proper
init event selftest function.
This update may have been lost due to conflicting merges.
[ Impact: fix compiler warning and call extended event trace self tests ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds a filter_mutex to prevent the filter predicates from
being accessed concurrently by various external functions.
It's based on a previous patch by Li Zefan:
"[PATCH 7/7] tracing/filters: make filter preds RCU safe"
v2 changes:
- fixed wrong value returned in a add_subsystem_pred() failure case
noticed by Li Zefan.
[ Impact: fix trace filter corruption/crashes on parallel access ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: paulmck@linux.vnet.ibm.com
LKML-Reference: <1239946028.6639.13.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We can find some bugs in the trace events if we stress the writes as well.
The function tracer is a good way to stress the events.
[ Impact: extend scope of event tracer self-tests ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090416161746.604786131@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, every thing needed to read the binary output from the
ring buffers is available, with the exception of the way the ring
buffers handles itself internally.
This patch creates two special files in the debugfs/tracing/events
directory:
# cat /debug/tracing/events/header_page
field: u64 timestamp; offset:0; size:8;
field: local_t commit; offset:8; size:8;
field: char data; offset:16; size:4080;
# cat /debug/tracing/events/header_event
type : 2 bits
len : 3 bits
time_delta : 27 bits
array : 32 bits
padding : type == 0
time_extend : type == 1
data : type == 3
This is to allow a userspace app to see if the ring buffer format changes
or not.
[ Impact: allow userspace apps to know of ringbuffer format changes ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As events start to become popular, and the new way to add tracing
infrastructure into ftrace, it is important to catch any problems
that might happen with a mistake in the TRACE_EVENT macro.
This patch introduces a startup self test on the registered trace
events. Note, it can only do a generic test, any type of testing that
needs more involement is needed to be implemented by the tracepoint
creators.
The test goes down one by one enabling a trace point and running
some random tasks (random in the sense that I just made them up).
Those tasks are creating threads, grabbing mutexes and spinlocks
and using workqueues.
After testing each event individually, it does the same test after
enabling each system of trace points. Like sched, irq, lockdep.
Then finally it enables all tracepoints and performs the tasks again.
The output to the console on bootup will look like this when everything
works:
Running tests on trace events:
Testing event kfree_skb: OK
Testing event kmalloc: OK
Testing event kmem_cache_alloc: OK
Testing event kmalloc_node: OK
Testing event kmem_cache_alloc_node: OK
Testing event kfree: OK
Testing event kmem_cache_free: OK
Testing event irq_handler_exit: OK
Testing event irq_handler_entry: OK
Testing event softirq_entry: OK
Testing event softirq_exit: OK
Testing event lock_acquire: OK
Testing event lock_release: OK
Testing event sched_kthread_stop: OK
Testing event sched_kthread_stop_ret: OK
Testing event sched_wait_task: OK
Testing event sched_wakeup: OK
Testing event sched_wakeup_new: OK
Testing event sched_switch: OK
Testing event sched_migrate_task: OK
Testing event sched_process_free: OK
Testing event sched_process_exit: OK
Testing event sched_process_wait: OK
Testing event sched_process_fork: OK
Testing event sched_signal_send: OK
Running tests on trace event systems:
Testing event system skb: OK
Testing event system kmem: OK
Testing event system irq: OK
Testing event system lockdep: OK
Testing event system sched: OK
Running tests on all trace events:
Testing all events: OK
[ folded in:
tracing: add #include <linux/delay.h> to fix build failure in test_work()
This build failure occured on a few rare configs:
kernel/trace/trace_events.c: In function ‘test_work’:
kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’
kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’
delay.h is included in way too many other headers, hiding cases
where new usage is added without header inclusion.
[ Impact: build fix ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
]
[ Impact: add event tracer self-tests ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Impact: compile fix
The addition of TRACE_EVENT for modules breaks the build for when
modules are disabled. This code fixes that.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Impact: allow modules to add TRACE_EVENTS on load
This patch adds the final hooks to allow modules to use the TRACE_EVENT
macro. A notifier and a data structure are used to link the TRACE_EVENTs
defined in the module to connect them with the ftrace event tracing system.
It also adds the necessary automated clean ups to the trace events when a
module is removed.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Impact: let modules add trace events
The trace event code requires some functions to be exported to allow
modules to use TRACE_EVENT. This patch adds EXPORT_SYMBOL_GPL to the
necessary functions.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Impact: makes it possible to define events in modules
The events are created by reading down the section that they are linked
in by the macros. But this is not scalable to modules. This patch converts
the manipulations to use a global link list, and on boot up it adds
the items in the section to the list.
This change will allow modules to add their tracing events to the list as
well.
Note, this change alone does not permit modules to use the TRACE_EVENT macros,
but the change is needed for them to eventually do so.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch allows event filters to be safely removed or switched
on-the-fly while avoiding the use of rcu or the suspension of tracing of
previous versions.
It does it by adding a new filter_pred_none() predicate function which
does nothing and by never deallocating either the predicates or any of
the filter_pred members used in matching; the predicate lists are
allocated and initialized during ftrace_event_calls initialization.
Whenever a filter is removed or replaced, the filter_pred_* functions
currently in use by the affected ftrace_event_call are immediately
switched over to to the filter_pred_none() function, while the rest of
the filter_pred members are left intact, allowing any currently
executing filter_pred_* functions to finish up, using the values they're
currently using.
In the case of filter replacement, the new predicate values are copied
into the old predicates after the above step, and the filter_pred_none()
functions are replaced by the filter_pred_* functions for the new
filter. In this case, it is possible though very unlikely that a
previous filter_pred_* is still running even after the
filter_pred_none() switch and the switch to the new filter_pred_*. In
that case, however, because nothing has been deallocated in the
filter_pred, the worst that can happen is that the old filter_pred_*
function sees the new values and as a result produces either a false
positive or a false negative, depending on the values it finds.
So one downside to this method is that rarely, it can produce a bad
match during the filter switch, but it should be possible to live with
that, IMHO.
The other downside is that at least in this patch the predicate lists
are always pre-allocated, taking up memory from the start. They could
probably be allocated on first-use, and de-allocated when tracing is
completely stopped - if this patch makes sense, I could create another
one to do that later on.
Oh, and it also places a restriction on the size of __arrays in events,
currently set to 128, since they can't be larger than the now embedded
str_val arrays in the filter_pred struct.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: paulmck@linux.vnet.ibm.com
LKML-Reference: <1239610670.6660.49.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds run-time field descriptions to all the event formats
exported using TRACE_EVENT_FORMAT. It also hooks up all the tracers
that use them (i.e. the tracers in the 'ftrace subsystem') so they can
also have their output filtered by the event-filtering mechanism.
When I was testing this, there were a couple of things that fooled me
into thinking the filters weren't working, when actually they were -
I'll mention them here so others don't make the same mistakes (and file
bug reports. ;-)
One is that some of the tracers trace multiple events e.g. the
sched_switch tracer uses the context_switch and wakeup events, and if
you don't set filters on all of the traced events, the unfiltered output
from the events without filters on them can make it look like the
filtering as a whole isn't working properly, when actually it is doing
what it was asked to do - it just wasn't asked to do the right thing.
The other is that for the really high-volume tracers e.g. the function
tracer, the volume of filtered events can be so high that it pushes the
unfiltered events out of the ring buffer before they can be read so e.g.
cat'ing the trace file repeatedly shows either no output, or once in
awhile some output but that isn't there the next time you read the
trace, which isn't what you normally expect when reading the trace file.
If you read from the trace_pipe file though, you can catch them before
they disappear.
Changes from v1:
As suggested by Frederic Weisbecker:
- get rid of externs in functions
- added unlikely() to filter_check_discard()
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- propagate return value of filter_add_pred() to the user
- return -ENOSPC but not -ENOMEM or -EINVAL when the filter array
is full
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <49E04CF0.3010105@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make sure messages from user space are NIL-terminated strings,
otherwise we could dump random memory while reading filter file.
Try this:
# echo 'parent_comm ==' > events/sched/sched_process_fork/filter
# cat events/sched/sched_process_fork/filter
parent_comm == �
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <49E04C32.6060508@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix crash (hang) when using TRACE_EVENT_FORMAT filter files
filters are only hooked up to the tracepoint events defined using
TRACE_EVENT but not the tracers that use TRACE_EVENT_FORMAT, such
as ftrace.
Do not display the filter files at all for TRACE_EVENT_FORMAT events
for the time being.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: =?ISO-8859-1?Q?Fr=E9d=E9ric?= Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237878882.8339.61.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Instead of just using the trace_seq buffer to print the filters, use
trace_seq_printf() as it was intended to be used.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: =?ISO-8859-1?Q?Fr=E9d=E9ric?= Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237878871.8339.59.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix (small) per trace filter modification memory leak
Free the current pred when clearing the filters via the filter files.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: =?ISO-8859-1?Q?Fr=E9d=E9ric?= Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237878851.8339.58.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, memory leak fix
This patch cleans up filter_add_subsystem_pred():
- searches for the field before creating a copy of the pred
- fixes memory leak in the case a predicate isn't applied
- if -ENOMEM, makes sure there's no longer a reference to the
pred so the caller can free the half-finished filter
- changes the confusing i == MAX_FILTER_PRED - 1 comparison
previously remarked upon
This affects only per-subsystem event filtering.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: =?ISO-8859-1?Q?Fr=E9d=E9ric?= Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237796808.7527.40.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need the filter files to be writable, the current
filter file permissions are only set readable.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1237759847-21025-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix potential kfree of random data in (rare) failure path
Zero-initialize the field structure.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1237710639.7703.46.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jason Baron