Commit Graph

2517 Commits

Author SHA1 Message Date
Yasunori Goto 281dd25cdc [PATCH] swiotlb: make sure initial DMA allocations really are in DMA memory
This introduces a limit parameter to the core bootmem allocator; The new
parameter indicates that physical memory allocated by the bootmem
allocator should be within the requested limit.

We also introduce alloc_bootmem_low_pages_limit, alloc_bootmem_node_limit,
alloc_bootmem_low_pages_node_limit apis, but alloc_bootmem_low_pages_limit
is the only api used for swiotlb.

The existing alloc_bootmem_low_pages() api could instead have been
changed and made to pass right limit to the core allocator.  But that
would make the patch more intrusive for 2.6.14, as other arches use
alloc_bootmem_low_pages().  We may be done that post 2.6.14 as a
cleanup.

With this, swiotlb gets memory within 4G for both x86_64 and ia64
arches.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Ravikiran G Thirumalai <kiran@scalex86.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19 23:11:33 -07:00
Benjamin Herrenschmidt 83bcbf8dad [PATCH] ppc64: Fix error in vDSO 32 bits date
The implementation of __kernel_gettimeofday() in the 32 bits vDSO has a
small bug (a typo actually) that will cause it to lose 1 bit of precision.
Not terribly bad but worth fixing.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19 23:04:30 -07:00
Kumar Gala 3d904eef54 [PATCH] ppc32: replace use of _GLOBAL with .globl for ppc32
The _GLOBAL() macro is for text symbols only. Changed to using
.globl for .data symbols.  This is also needed in ppc32 land
to allow FSL Book-E, 40x, and 44x to work.

Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:43:34 +10:00
Kumar Gala b15125fa81 [PATCH] powerpc: Some more fixes to allow building for a Book-E processor
Some minor fixes that are needed if we are building for a book-e
processor.

Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:43:32 +10:00
Paul Mackerras 344480b997 powerpc: Fix a corner case in __div64_32
The code was incorrectly doing a division by 0 in the case where
the denominator was 0x100000000 and the divisor was 0xffffffff.
Thanks to Fred Liu of Motorola for pointing this out.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:37:02 +10:00
Paul Mackerras a4bcc95a3a powerpc: Fix a branch-too-far link error for 32-bit targets
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:24:18 +10:00
Paul Mackerras f2783c1500 powerpc: Merge time.c and asm/time.h.
We now use the merged time.c for both 32-bit and 64-bit compilation
with ARCH=powerpc, and for ARCH=ppc64, but not for ARCH=ppc32.
This removes setup_default_decr (folds its function into time_init)
and moves wakeup_decrementer into time.c.  This also makes an
asm-powerpc/rtc.h.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:23:26 +10:00
Paul Mackerras 03f88e9f71 ppc64: Minor compilation fixes
This defines CONFIG_PPC_STD_MMU for ppc64, changes an instance of
sys32_ to compat_sys_ in the ppc64 syscall table, and removes a
reference to a non-existent arch/powerpc/xmon/Makefile.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:15:05 +10:00
Paul Mackerras b123923d48 powerpc: Move ptrace32.c from arch/ppc64 to arch/powerpc
Also corrected my email address in ptrace.c and updated the comments
at the top of ptrace32.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:11:29 +10:00
Tony Lindgren 67c5587ad4 [ARM] 3024/1: Add cpu_v6_proc_fin
Patch from Tony Lindgren

Machine restart calls cpu_proc_fin() to clean and disable
cache, and turn off interrupts. This patch adds proper
cpu_v6_proc_fin.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-19 23:00:56 +01:00
Paul Mackerras 9b7cf8b49d powerpc: Eliminate a compile warning in signal_32.c
The second argument of get_sigset_t needed to have the const keyword.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19 23:13:04 +10:00
Paul Mackerras 143a1dec7e powerpc: Merge machdep.h
A few things change for consistency between ppc32 and ppc64:
idle functions return void; *_get_boot_time functions return
unsigned long (i.e. time_t) rather than filling in a struct rtc_time
(since that's useful to the callers and easier for pmac to
generate); *_get_rtc_time and *_set_rtc_time functions take
a struct rtc_time; irq_canonicalize is gone; nvram_sync returns
void.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19 23:11:21 +10:00
Paul Mackerras 7ed476d17f ppc: Minor smp changes for consistency with ppc64
This makes platform code use the smp_ops variable directly instead
of ppc_md.smp_ops, removes the two unused `data' and `wait' arguments
from the *_message_pass() functions, and removes the call to the
never-implemented smp_ops->space_timers() function.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19 21:44:51 +10:00
Ben Dooks c086f282c0 [ARM] 3018/1: S3C2410 - check de-referenced device is really a platform device
Patch from Ben Dooks

Check that the device we are looking at is really
a platform device before trying to cast it to one
to find out the platform bus number.

Thanks to RMK for pointing this out.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-18 07:51:34 +01:00
Paul Mackerras 46aab8c584 Merge rsync://oak/kernels/iseries/work/ 2005-10-18 14:53:41 +10:00
Stephen Rothwell b09a4913b1 powerpc: change sys32_ to compat_sys_
This allows us to get rid of one type of entry in systbl.S.

In passing we remove the duplicate compat_sys_getdents and
compat_sys_utimes for which there are generic versions.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-18 14:51:57 +10:00
Paul Mackerras 77f543cb46 powerpc: Fix various compile errors with ARCH=ppc, ppc64 and powerpc
This makes ppc use the syscalls.c from arch/powerpc/kernel, exports
copy_and_flush from head_32.S for use by prom_init.c (ARCH=powerpc),
and consolidates the sys_fadvise64_64 implementations for 32-bit.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-18 14:19:41 +10:00
Stephen Rothwell 81e7009ea4 powerpc: merge ppc signal.c and ppc64 signal32.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-18 11:17:58 +10:00
David Gibson 55d363397f [PATCH] powerpc: Another maple merge tree fix
With ARCH=powerpc, a spurious ifdef in prom_init prevented the
seconday hold loop being correctly copied down on Maple.  With this
patch, Maple boots with ARCH=powerpc

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 21:43:12 +10:00
David Gibson 61f684ec07 [PATCH] powerpc: Fix use of LOADBASE in merge tree
The merge-tree version of LOADBASE actually loads the whole given
address from the toc for ppc64.  The matching OFF macro adjust for
this, using an offset of 0 for ppc64, but we weren't using that in
power4_idle.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 21:43:12 +10:00
Kumar Gala ea703ce206 [PATCH] powerpc: replace use of _GLOBAL with .globl
The _GLOBAL() macro is for text symbols only. Changed to using
.globl for .data symbols.

Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 21:43:12 +10:00
Paul Mackerras 5f29675533 powerpc: Make CONFIG_PROC_DEVICETREE independent of CONFIG_PPC_OF
... since all platforms will have a device tree.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 20:14:59 +10:00
Paul Mackerras dd184343b4 powerpc: Clear the BSS at the start of early_init with ARCH=ppc
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 20:13:47 +10:00
Paul Mackerras 7ac59c6249 ppc: Fix various compile errors resulting from ptrace.c merge
This introduces flush_{fp,altivec,spe}_to_thread and fixes a
branch-too-far error in linking.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 20:12:39 +10:00
Paul Mackerras 3e63b9ec51 ppc: Use the merged of_device.c from arch/powerpc/kernel
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 20:11:03 +10:00
Paul Mackerras 30286ef6e0 powerpc: Merge syscalls.c and sys_ppc32.c.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 20:10:13 +10:00
Paul Mackerras 30cd4a4e9c powerpc: Initialize btext subsystem later, after prom_init
We were initializing the btext stuff from prom_init(), thus breaking
the rule that all communication between prom_init() and the rest of
the kernel has to be via the flattened device tree.  This removes
the btext initialization calls from prom_init() and initializes it
instead after the device tree is unflattened.  It would be nice to
do it earlier, but that needs some more infrastructure to find the
properties we need in the flattened device tree.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 19:20:46 +10:00
Stephen Rothwell 7dffb72028 ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES
instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
Linus Torvalds f8cc5756de Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-10-14 17:17:04 -07:00
Linus Torvalds 9e04099cb9 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-10-14 17:16:35 -07:00
Benjamin Herrenschmidt 1350843cf0 [PATCH] ppc64: Fix G5 model in /proc/cpuinfo
Andreas Schwab spotted that recent kernels broke reporting of the PowerMac
machine model in /proc/cpuinfo.  This fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14 17:10:12 -07:00
Hirokazu Takata a90933fb4e [PATCH] m32r: Fix smp.c for preempt kernel
This patch fixes the following BUG message of arch/m32r/smp.c for
CONFIG_DEBUG_PREEMPT:

BUG: using smp_processor_id() in preemptible

This message is displayed by an smp_processor_id() execution during
kernel's preemptible-state.

Signed-off-by: Hitoshi Yamamoto <hitoshiy@isl.melco.co.jp>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14 17:10:12 -07:00
Yoichi Yuasa 43d2c4ca38 [PATCH] mips: fix build error in TANBAC TB0226
arch/mips/pci/fixup-tb0226.c: In function `pcibios_map_irq':
arch/mips/pci/fixup-tb0226.c:31: warning: implicit declaration of function `vr41xx_set_irq_trigger'
arch/mips/pci/fixup-tb0226.c:32: error: `TRIGGER_LEVEL' undeclared (first use in this function)
arch/mips/pci/fixup-tb0226.c:32: error: (Each undeclared identifier is reported only once
arch/mips/pci/fixup-tb0226.c:32: error: for each function it appears in.)
arch/mips/pci/fixup-tb0226.c:33: error: `SIGNAL_THROUGH' undeclared (first use in this function)
arch/mips/pci/fixup-tb0226.c:34: warning: implicit declaration of function `vr41xx_set_irq_level'
arch/mips/pci/fixup-tb0226.c:34: error: `LEVEL_LOW' undeclared (first use in this function)

Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14 17:10:11 -07:00
David S. Miller b4d1b82578 [SPARC64]: Fix powering off on SMP.
Doing a "SUNW,stop-self" firmware call on the other cpus is not the
correct thing to do when dropping into the firmware for a halt,
reboot, or power-off.

For now, just do nothing to quiet the other cpus, as the system should
be quiescent enough.  Later we may decide to implement smp_send_stop()
like the other SMP platforms do.

Based upon a report from Christopher Zimmermann.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-14 15:26:08 -07:00
Richard Purdie 72023b63cc [ARM] 3013/1: Spitz: Fix compile errors
Patch from Richard Purdie

Remove a couple of lines of accidently added code causing compile
errors.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14 16:07:27 +01:00
Richard Purdie 10f92eb7c6 [ARM] 3012/1: Corgi/Spitz LCD: Use bus_find_device to locate pxafb - fix compile error
Patch from Richard Purdie

Update corgi_lcd to use bus_find_device to locate the pxafb device
hence fixing a compile error.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14 16:07:26 +01:00
Richard Purdie cb38c569e5 [ARM] 3011/1: pxafb: Add ability to set device parent + fix spitz compile error
Patch from Richard Purdie

Add a function to allow machines to set the parent of the pxa
framebuffer device. This means the power up/down sequence can be
controlled where required by the machine.

Update spitz to use the new function, fixing a compile error.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14 16:07:25 +01:00
Deepak Saxena cb90d681ae [ARM] 2980/1: Fix L7200 core.c compile
Patch from Deepak Saxena

This patch fixes L7200 so that it builds in 2.6.latest. I do not
have the hardware so don't know if it actually still works, but
the changes are fairly trivial. I am not even sure if anyone
still maintains, uses, or cares about this machine type.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14 12:49:15 +01:00
Stephen Rothwell c6d2ea92d1 powerpc: move iSeries/HvCallPci.h to platforms/iseries/call_pci.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14 17:16:17 +10:00
Stephen Rothwell 0e29bb1a4e powerpc: move iSeries/HvCallHpt.h to platforms/iseries/call_hpt.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14 17:09:16 +10:00
Stephen Rothwell 20f48ccfa0 powerpc: eliminate DsaAddr from pci_dn
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14 16:49:58 +10:00
David S. Miller 688cb30bdc [SPARC64]: Eliminate PCI IOMMU dma mapping size limit.
The hairy fast allocator in the sparc64 PCI IOMMU code
has a hard limit of 256 pages.  Certain devices can
exceed this when performing very large I/Os.

So replace with a more simple allocator, based largely
upon the arch/ppc64/kernel/iommu.c code.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-13 22:15:24 -07:00
Stephen Rothwell bffa8fc383 powerpc: remove ISERIES_[SUB]BUS macros
This allows us to simplify a couple of things.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14 15:06:10 +10:00
Stephen Rothwell 426c1a11a6 powerpc: move iSeries/iSeries_pci.h to platforms/iseries
The only real user of this file outside platforms/iseries was
drivers/net/iseries_veth.c but all it wanted was ISERIES_HV_ADDR()
so we move that to abs_addr.h (and lowercase it).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14 14:51:42 +10:00
David S. Miller 51e8513615 [SPARC64]: Consolidate common PCI IOMMU init code.
All the PCI controller drivers were doing the same thing
setting up the IOMMU software state, put it all in one spot.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-13 21:10:08 -07:00
David S. Miller c8923c6b85 [NETFILTER]: Fix OOPSes on machines with discontiguous cpu numbering.
Original patch by Harald Welte, with feedback from Herbert Xu
and testing by Sbastien Bernard.

EBTABLES, ARP tables, and IP/IP6 tables all assume that cpus
are numbered linearly.  That is not necessarily true.

This patch fixes that up by calculating the largest possible
cpu number, and allocating enough per-cpu structure space given
that.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-13 14:41:23 -07:00
Nicolas Pitre 13b1f64c16 [ARM] 3008/1: the exception table is not read-only
Patch from Nicolas Pitre

... and therefore should not live in the .text section.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-13 22:04:37 +01:00
Ben Dooks 50688ea9ed [ARM] 3007/1: BAST - add CONFIG_ISA to build
Patch from Ben Dooks

The Simtec EB2410ITX (BAST) has a PC/104 slot, and
therefore we should enable CONFIG_ISA to allow the
drivers for ISA peripherals to be selected

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-13 22:04:36 +01:00
Linus Torvalds c931488cc4 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-10-13 09:59:32 -07:00
Ben Dooks 3a8f675c40 [ARM] 3006/1: S3C2410 - arch/arm/mach-s3c2410 sparse fixes
Patch from Ben Dooks

Remove an unused variable from s3c2410.c and
ensure that items not needed to be exported from
s3c2440.c are declared static.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-13 16:46:35 +01:00
Stephen Rothwell 190554db7b powerpc: fix uname -m
It will now give ppc64 on 64bit platforms and ppc on 32bit
platforms.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 16:14:15 +10:00
Stephen Rothwell e8a30302ab powerpc: merge ptrace.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 15:52:04 +10:00
Stephen Rothwell eec5ef9098 ppc64: use powerpc of_device.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 15:16:25 +10:00
Stephen Rothwell ae2752050d ppc64: fix arch/ppc64/kernel/Makefile
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 14:12:25 +10:00
Stephen Rothwell d4bf9a7858 ppc64: merge binfmt_elf32.c
and use start_thread for both 32 and 64 bit bineries.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 13:40:54 +10:00
Stephen Rothwell 0f17d0742f powerpc: make 64 bit binaries work
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 09:49:56 +10:00
Stephen Rothwell 7062018687 powerpc: create 32 bit LOADADDR macro
and use it in misc_32.S

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 09:49:51 +10:00
Stephen Rothwell 4920960f57 powerpc: consolidate cputable.c
Also simplify arch/ppc64/kernel/Makefile

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 09:49:45 +10:00
David S. Miller c9c1083074 [SPARC64]: Fix boot failures on SunBlade-150
The sequence to move over to the Linux trap tables from
the firmware ones needs to be more air tight.  It turns
out that to be %100 safe we do need to be able to translate
OBP mappings in our TLB miss handlers early.

In order not to eat up a lot of kernel image memory with
static page tables, just use the translations array in
the OBP TLB miss handlers.  That solves the bulk of the
problem.

Furthermore, to make sure the OBP TLB miss path will work
even before the fixed MMU globals are loaded, explicitly
load %g1 to TLB_SFSR at the beginning of the i-TLB and
d-TLB miss handlers.

To ease the OBP TLB miss walking of the prom_trans[] array,
we sort it then delete all of the non-OBP entries in there
(for example, there are entries for the kernel image itself
which we're not interested in at all).

We also save about 32K of kernel image size with this change.
Not a bad side effect :-)

There are still some reasons why trampoline.S can't use the
setup_trap_table() yet.  The most noteworthy are:

1) OBP boots secondary processors with non-bias'd stack for
   some reason.  This is easily fixed by using a small bootup
   stack in the kernel image explicitly for this purpose.

2) Doing a firmware call via the normal C call prom_set_trap_table()
   goes through the whole OBP enter/exit sequence that saves and
   restores OBP and Linux kernel state in the MMUs.  This path
   unfortunately does a "flush %g6" while loading up the OBP locked
   TLB entries for the firmware call.

   If we setup the %g6 in the trampoline.S code properly, that
   is in the PAGE_OFFSET linear mapping, but we're not on the
   kernel trap table yet so those addresses won't translate properly.

   One idea is to do a by-hand firmware call like we do in the
   early bootup code and elsewhere here in trampoline.S  But this
   fails as well, as aparently the secondary processors are not
   booted with OBP's special locked TLB entries loaded.  These
   are necessary for the firwmare to processes TLB misses correctly
   up until the point where we take over the trap table.

This does need to be resolved at some point.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-12 12:22:46 -07:00
Ben Dooks 6ec5e7f365 [ARM] 2978/1: nwfpe - clean up sparse errors
Patch from Ben Dooks

The NWFPE is producing a number of errors from sparse
due to not defining a number of functions in the
header files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12 19:58:10 +01:00
George G. Davis 737d0bb770 [ARM] 2969/1: miscellaneous whitespace cleanup
Patch from George G. Davis

Fix leading, trailing and other miscellaneous whitespace issues
in arch/arm/kernel/alignment.c.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12 19:58:10 +01:00
George G. Davis cd26f45bfc [ARM] 2970/1: Use -mtune=arm1136j-s when building for CPU_V6 targets
Patch from George G. Davis

When building for CPU_V6 targets, we should use -mtune=arm1136j-s rather
than -mtune=strongarm but fall back to the later in case someone is
using an older toolchain (although they should really upgrade instead).

Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12 19:58:09 +01:00
Ben Dooks 9f693d7b14 [ARM] 2979/2: S3C2410 - add static to non-exported machine items
Patch from Ben Dooks

Do not export items that are not needed by symbol name
elsewhere

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12 19:58:07 +01:00
Ben Dooks a7b1bbbc89 [ARM] 2977/1: armksyms.c - make items in export table static
Patch from Ben Dooks

The items in the export table do not need to be
exported elsehwere, so quash the sparse warning
by making the symbol for the table entry static.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12 19:58:07 +01:00
Ben Dooks 0eea3c0b6c [ARM] 2975/1: S3C2410: time.c missing include of cpu.h
Patch from Ben Dooks

arch/arm/mach-s3c2410/time.c is missing include
of cpu.h, causing the declaration of the timer
struct (s3c24xx_timer) to be flagged as missing
the declaration.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12 19:58:05 +01:00
Nicolas Pitre 60ac133aac [ARM] 2974/1: fix ARM710 swi bug workaround
Patch from Nicolas Pitre

Either no one is using an ARM710 with recent kernels, or all ARM710s
still in use are not afflicted by this swi bug.  Nevertheless, the code
to work around the ARM710 swi bug is itself currently buggy since it
uses r8 as a pointer to S_PC while in fact it holds the spsr content
these days. Fix that, and simplify the code as well.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12 19:51:24 +01:00
Benjamin Herrenschmidt d8e998c58a [PATCH] ppc32: Tell userland about lack of standard TB
Glibc is about to get some new high precision timer stuff that relies on
the standard timebase of the PPC architecture.

However, some (rare & old) CPUs do not have such timebase and it is a
bit annoying to have your stuff just crash because you are running on
the wrong CPU...

This exposes to userland a CPU feature bit that tells that the current
processor doesn't have a standard timebase.  It's negative logic so that
glibc will still "just work" on older kernels (it will just be unhappy
on those old CPUs but that doesn't really matter as distro tend to
update glibc & kernel at the same time).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-12 08:24:47 -07:00
Paolo 'Blaisorblade' Giarrusso 9d624ea474 [PATCH] uml: compile-time fix recent patch
Give an empty definition for clear_can_do_skas() when it is not needed.
Thanks to Junichi Uekawa <dancer@netfort.gr.jp> for reporting the
breakage and providing a fix (I re-fixed it in an IMHO cleaner way).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-12 08:22:26 -07:00
Jeff Dike 91acb21f08 [PATCH] uml: revert block driver use of host AIO
The patch to use host AIO support that I submitted early after 2.6.13 exposed
some problems in the block driver.  I have fixes for these, but am not
comfortable putting them into 2.6.14 at this late date.  So, this patch reverts
the use of host AIO.

I will resubmit the original patch, plus fixes to the driver after 2.6.14
in order to get a reasonable amount of testing before they're exposed to
the general public.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-12 08:22:26 -07:00
Paul Mackerras 5629d41d5c powerpc: Bring in some changes made to arch/ppc and include/asm-ppc64
Recent commits upstream have changed files which are currently
duplicated in arch/powerpc and include/asm-powerpc.  This updates
them with the corresponding changes.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-12 17:01:50 +10:00
Paul Mackerras 3eac8c69d1 powerpc: Move default hash table size calculation to hash_utils_64.c
We weren't computing the size of the hash table correctly on iSeries
because the relevant code in prom.c was #ifdef CONFIG_PPC_PSERIES.
This moves the code to hash_utils_64.c, makes it unconditional, and
cleans it up a bit.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-12 16:58:53 +10:00
Paul Mackerras b6ec995a21 Merge from Linus' tree 2005-10-12 14:43:32 +10:00
Stephen Rothwell 3a5f8c5f78 powerpc: make iSeries boot again
On ARCH=ppc64 we were getting htab_hash_mask recalculated
to the correct value for our particular machine by accident.
In the merge tree, that code was commented out, so htab_hash_mask
was being corrupted.

We now set ppc64_pft_size instead which gets htab_has_mask
calculated correctly for us later.  We should put an
ibm,pft-size property in the device tree at some point.

Also set -mno-minimal-toc in some makefiles.
Allow iSeries to configure PROC_DEVICETREE.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-12 10:58:00 +10:00
Stephen Rothwell f255f0dd1b powerpc: pci_dn's should point to their device_node's
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-12 10:57:45 +10:00
Linus Torvalds da64c6ee6b Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-10-11 16:39:24 -07:00
David S. Miller b1b510aa28 [SPARC64]: Fix net booting on Ultra5
We were not doing alignment properly when remapping the kernel image.

What we want is a 4MB aligned physical address to map at KERNBASE.
Mistakedly we were 4MB aligning the virtual address where the kernel
initially sits, that's wrong.

Instead, we should PAGE align the virtual address, then 4MB align the
physical address result the prom gives to us.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-11 15:45:16 -07:00
Peter Bergner 9149ccfa35 [PATCH] ppc64: Add R_PPC64_TOC16 module reloc
Newer gcc's are generating this relocation, so the module loader needs to
handle it.

Signed-off-by: Peter Bergner <bergner@vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 09:46:54 -07:00
Hirokazu Takata 9de11aab1c [PATCH] m32r: trap handler code for illegal traps
This patch prevents illegal traps from causing m32r kernel's infinite loop
execution.

Signed-off-by: Naoto Sugai <sugai@isl.melco.co.jp>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 09:46:54 -07:00
Paolo Galtieri a0c111c631 [PATCH] ppc highmem fix
I've noticed that the calculations for seg_size and nr_segs in
__dma_sync_page_highmem() (arch/ppc/kernel/dma-mapping.c) are wrong.  The
incorrect calculations can result in either an oops or a panic when running
fsck depending on the size of the partition.

The problem with the seg_size calculation is that it can result in a
negative number if size is offset > size.  The problem with the nr_segs
caculation is returns the wrong number of segments, e.g.  it returns 1 when
size is 200 and offset is 4095, when it should return 2 or more.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 09:46:54 -07:00
Anton Blanchard e4314bf496 [PATCH] ppc64: Fix PCI hotplug
pSeries_irq_bus_setup is marked __devinit but references s7a_workaround
which is marked __initdata.

Depending on who got the memory for s7a_workaround (and if the value was
now positive), it was possible for PCI hotplugged devices to have 3
subtracted from their interrupt number.  This would happen randomly and
caused me much confusion :)

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 09:46:53 -07:00
Paul Mackerras f696012330 ppc64: compile fix - define execve in misc.S
This used to be inline in include/asm-ppc64/unistd.h, but isn't
inline in the merged include/asm-powerpc/unistd.h, so we need a
definition here.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 22:10:49 +10:00
Paul Mackerras 3abec857a0 ppc64: Use merged versions of init_task.c and process.c.
These two files are now built in arch/powerpc/kernel instead of
arch/ppc64/kernel.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 22:09:48 +10:00
Paul Mackerras fd582ec88e ppc: Various minor compile fixes
This fixes up a variety of minor problems in compiling with ARCH=ppc
arising from using the merged versions of various header files.
A lot of the changes are just adding #include <asm/machdep.h> to
files that use ppc_md or smp_ops_t.

This also arranges for us to use semaphore.c, vecemu.c, vector.S and
fpu.S from arch/powerpc/kernel when compiling with ARCH=ppc.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 22:08:12 +10:00
Paul Mackerras 35d81a4bfe ppc: Adapt to asm-powerpc/irq.h irq_canonicalize changes
Now instead of having a ppc_md function, we just have a variable
which says whether to do the i8259 irq canonicalization or not,
and set that variable on the platforms that need that.  It looks
to me that radstone_ppc7d was trying to use irq canonicalization
for something else in a broken kind of way - it will need to be
fixed properly.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 22:03:09 +10:00
Paul Mackerras cc5aa206d2 powerpc: Remove debug messages from setup_64.c
A bunch of printks were left in arch/powerpc/kernel/setup_64.c from
when I was chasing a bug.  This removes them.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 17:35:20 +10:00
David S. Miller 08eb8f124f [SPARC32]: Revert IOMAP change eb98129eec
Breakage noted by Al Viro.

It breaks non-PCI builds, it's probably better to have a more
direct implementation on sparc32, and which driver actually
needs this is still questionable.

We can resolve this in 2.6.15

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-10 21:02:26 -07:00
Paul Mackerras abc244dd85 powerpc: Remove xmon.h include from arch/powerpc/platforms/powermac/pic.c
... since it isn't needed.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 10:00:07 +10:00
Paul Mackerras 8d66912c3d powerpc: Remove 83xx from arch/powerpc/platforms/Makefile for now
Since we don't have an 83xx directory or a 83xx/Makefile, having
83xx in causes make clean to fail.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 09:59:53 +10:00
Paul Mackerras 20f629549b powerpc: Make building the boot image work for both 32-bit and 64-bit
At the moment we don't have a merged arch/powerpc/boot, so we build the
boot images in arch/ppc/boot and arch/ppc64/boot.  Unfortunately the
makefile targets are different in those two directories, so this makes
a change to accommodate both for the moment.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 09:59:32 +10:00
Andi Kleen 3c92c2ba33 [PATCH] i386: Don't discard upper 32bits of HWCR on K8
Need to use long long, not long when RMWing a MSR. I think
it's harmless right now, but still should be better fixed
if AMD adds any bits in the upper 32bit of HWCR.

Bug was introduced with the TLB flush filter fix for i386

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 16:34:09 -07:00
Andi Kleen 421c7ce6d0 [PATCH] x86_64: Allocate cpu local data for all possible CPUs
CPU hotplug fills up the possible map to NR_CPUs, but it did that after
setting up per CPU data. This lead to CPU data not getting allocated
for all possible CPUs, which lead to various side effects.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 16:33:25 -07:00
Linus Torvalds af74c3a61d Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-10-10 16:32:32 -07:00
David S. Miller 5d8e1b181c [SPARC64]: Fix Ultra5, Ultra60, et al. boot failures.
On the boot processor, we need to do the move onto the Linux trap
table a little bit differently else we'll take unhandlable faults in
the firmware address space.

Previously we would do the following:

1) Disable PSTATE_IE in %pstate.
2) Set %tba by hand to sparc64_ttable_tl0
3) Initialize alternate, mmu, and interrupt global
   trap registers.
4) Call prom_set_traptable()

That doesn't work very well actually with the way we boot the kernel
VM these days.  It worked by luck on many systems because the firmware
accesses for the prom_set_traptable() call happened to be loaded into
the TLB already, something we cannot assume.

So the new scheme is this:

1) Clear PSTATE_IE in %pstate and set %pil to 15
2) Call prom_set_traptable()
3) Initialize alternate, mmu, and interrupt global
   trap registers.

and this works quite well.  This sequence has been moved into a
callable function in assembler named setup-trap_table().  The idea is
that eventually trampoline.S can use this code as well.  That isn't
possible currently due to some complications, but eventually we should
be able to do it.

Thanks to Meelis Roos for the Ultra5 boot failure report.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-10 16:12:13 -07:00
Andi Kleen 094804c5a1 [PATCH] x86_64: Fix change_page_attr cache flushing
Noticed by Terence Ripperda

Undo wrong change in global_flush_tlb. We need to flush the caches in all
cases, not just when pages were reverted. This was a bogus optimization
added earlier, but it was wrong.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 16:10:33 -07:00
Linus Torvalds ec384d297c Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-10-10 10:39:14 -07:00
Vincent Sanders 71e2b2ecc1 [ARM] 2968/1: defconfig for the ARM Collie platform
Patch from Vincent Sanders

Add a defconfig for the ARM Collie platform

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10 18:24:09 +01:00
Vincent Sanders 36e5ea6759 [ARM] 2967/1: defconfig for the ARM Corgi platform
Patch from Vincent Sanders

Add a defconfig for the ARM Corgi Zarus platform

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10 18:24:08 +01:00
Vincent Sanders b0bdc7be78 [ARM] 2966/1: defconfig for the ARM Poodle platform
Patch from Vincent Sanders

Add a defconfig for the ARM Poodle Zarus platform

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10 18:24:07 +01:00
Vincent Sanders 86b324874f [ARM] 2965/1: defconfig for the ARM Spitz platform
Patch from Vincent Sanders

Add a defconfig for the ARM Spitz Zarus platform

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10 18:24:06 +01:00
Markus F.X.J. Oberhumer d347f37227 [PATCH] i386: fix stack alignment for signal handlers
This fixes the setup of the alignment of the signal frame, so that all
signal handlers are run with a properly aligned stack frame.

The current code "over-aligns" the stack pointer so that the stack frame
is effectively always mis-aligned by 4 bytes.  But what we really want
is that on function entry ((sp + 4) & 15) == 0, which matches what would
happen if the stack were aligned before a "call" instruction.

Signed-off-by: Markus F.X.J. Oberhumer <markus@oberhumer.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 08:45:06 -07:00