/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 1999-2008 Silicon Graphics, Inc. All rights reserved. */ /* * Cross Partition Network Interface (XPNET) support * * XPNET provides a virtual network layered on top of the Cross * Partition communication layer. * * XPNET provides direct point-to-point and broadcast-like support * for an ethernet-like device. The ethernet broadcast medium is * replaced with a point-to-point message structure which passes * pointers to a DMA-capable block that a remote partition should * retrieve and pass to the upper level networking layer. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "xp.h" /* * The message payload transferred by XPC. * * buf_pa is the physical address where the DMA should pull from. * * NOTE: for performance reasons, buf_pa should _ALWAYS_ begin on a * cacheline boundary. To accomplish this, we record the number of * bytes from the beginning of the first cacheline to the first useful * byte of the skb (leadin_ignore) and the number of bytes from the * last useful byte of the skb to the end of the last cacheline * (tailout_ignore). * * size is the number of bytes to transfer which includes the skb->len * (useful bytes of the senders skb) plus the leadin and tailout */ struct xpnet_message { u16 version; /* Version for this message */ u16 embedded_bytes; /* #of bytes embedded in XPC message */ u32 magic; /* Special number indicating this is xpnet */ u64 buf_pa; /* phys address of buffer to retrieve */ u32 size; /* #of bytes in buffer */ u8 leadin_ignore; /* #of bytes to ignore at the beginning */ u8 tailout_ignore; /* #of bytes to ignore at the end */ unsigned char data; /* body of small packets */ }; /* * Determine the size of our message, the cacheline aligned size, * and then the number of message will request from XPC. * * XPC expects each message to exist in an individual cacheline. */ #define XPNET_MSG_SIZE (L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET) #define XPNET_MSG_DATA_MAX \ (XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data)) #define XPNET_MSG_ALIGNED_SIZE (L1_CACHE_ALIGN(XPNET_MSG_SIZE)) #define XPNET_MSG_NENTRIES (PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE) #define XPNET_MAX_KTHREADS (XPNET_MSG_NENTRIES + 1) #define XPNET_MAX_IDLE_KTHREADS (XPNET_MSG_NENTRIES + 1) /* * Version number of XPNET implementation. XPNET can always talk to versions * with same major #, and never talk to versions with a different version. */ #define _XPNET_VERSION(_major, _minor) (((_major) << 4) | (_minor)) #define XPNET_VERSION_MAJOR(_v) ((_v) >> 4) #define XPNET_VERSION_MINOR(_v) ((_v) & 0xf) #define XPNET_VERSION _XPNET_VERSION(1,0) /* version 1.0 */ #define XPNET_VERSION_EMBED _XPNET_VERSION(1,1) /* version 1.1 */ #define XPNET_MAGIC 0x88786984 /* "XNET" */ #define XPNET_VALID_MSG(_m) \ ((XPNET_VERSION_MAJOR(_m->version) == XPNET_VERSION_MAJOR(XPNET_VERSION)) \ && (msg->magic == XPNET_MAGIC)) #define XPNET_DEVICE_NAME "xp0" /* * When messages are queued with xpc_send_notify, a kmalloc'd buffer * of the following type is passed as a notification cookie. When the * notification function is called, we use the cookie to decide * whether all outstanding message sends have completed. The skb can * then be released. */ struct xpnet_pending_msg { struct list_head free_list; struct sk_buff *skb; atomic_t use_count; }; /* driver specific structure pointed to by the device structure */ struct xpnet_dev_private { struct net_device_stats stats; }; struct net_device *xpnet_device; /* * When we are notified of other partitions activating, we add them to * our bitmask of partitions to which we broadcast. */ static u64 xpnet_broadcast_partitions; /* protect above */ static DEFINE_SPINLOCK(xpnet_broadcast_lock); /* * Since the Block Transfer Engine (BTE) is being used for the transfer * and it relies upon cache-line size transfers, we need to reserve at * least one cache-line for head and tail alignment. The BTE is * limited to 8MB transfers. * * Testing has shown that changing MTU to greater than 64KB has no effect * on TCP as the two sides negotiate a Max Segment Size that is limited * to 64K. Other protocols May use packets greater than this, but for * now, the default is 64KB. */ #define XPNET_MAX_MTU (0x800000UL - L1_CACHE_BYTES) /* 32KB has been determined to be the ideal */ #define XPNET_DEF_MTU (0x8000UL) /* * The partition id is encapsulated in the MAC address. The following * define locates the octet the partid is in. */ #define XPNET_PARTID_OCTET 1 #define XPNET_LICENSE_OCTET 2 /* * Define the XPNET debug device structure that is to be used with dev_dbg(), * dev_err(), dev_warn(), and dev_info(). */ struct device_driver xpnet_dbg_name = { .name = "xpnet" }; struct device xpnet_dbg_subname = { .bus_id = {0}, /* set to "" */ .driver = &xpnet_dbg_name }; struct device *xpnet = &xpnet_dbg_subname; /* * Packet was recevied by XPC and forwarded to us. */ static void xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg) { struct sk_buff *skb; bte_result_t bret; struct xpnet_dev_private *priv = (struct xpnet_dev_private *)xpnet_device->priv; if (!XPNET_VALID_MSG(msg)) { /* * Packet with a different XPC version. Ignore. */ xpc_received(partid, channel, (void *)msg); priv->stats.rx_errors++; return; } dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size, msg->leadin_ignore, msg->tailout_ignore); /* reserve an extra cache line */ skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES); if (!skb) { dev_err(xpnet, "failed on dev_alloc_skb(%d)\n", msg->size + L1_CACHE_BYTES); xpc_received(partid, channel, (void *)msg); priv->stats.rx_errors++; return; } /* * The allocated skb has some reserved space. * In order to use bte_copy, we need to get the * skb->data pointer moved forward. */ skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data & (L1_CACHE_BYTES - 1)) + msg->leadin_ignore)); /* * Update the tail pointer to indicate data actually * transferred. */ skb_put(skb, (msg->size - msg->leadin_ignore - msg->tailout_ignore)); /* * Move the data over from the other side. */ if ((XPNET_VERSION_MINOR(msg->version) == 1) && (msg->embedded_bytes != 0)) { dev_dbg(xpnet, "copying embedded message. memcpy(0x%p, 0x%p, " "%lu)\n", skb->data, &msg->data, (size_t)msg->embedded_bytes); skb_copy_to_linear_data(skb, &msg->data, (size_t)msg->embedded_bytes); } else { dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t" "bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa, (void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), msg->size); bret = bte_copy(msg->buf_pa, __pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL); if (bret != BTE_SUCCESS) { // >>> Need better way of cleaning skb. Currently skb // >>> appears in_use and we can't just call // >>> dev_kfree_skb. dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned " "error=0x%x\n", (void *)msg->buf_pa, (void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), msg->size, bret); xpc_received(partid, channel, (void *)msg); priv->stats.rx_errors++; return; } } dev_dbg(xpnet, "head=0x%p skb->data=0x%p skb->tail=0x%p " "skb->end=0x%p skb->len=%d\n", (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), skb->len); skb->protocol = eth_type_trans(skb, xpnet_device); skb->ip_summed = CHECKSUM_UNNECESSARY; dev_dbg(xpnet, "passing skb to network layer\n" KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p " "skb->end=0x%p skb->len=%d\n", (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), skb->len); xpnet_device->last_rx = jiffies; priv->stats.rx_packets++; priv->stats.rx_bytes += skb->len + ETH_HLEN; netif_rx_ni(skb); xpc_received(partid, channel, (void *)msg); } /* * This is the handler which XPC calls during any sort of change in * state or message reception on a connection. */ static void xpnet_connection_activity(enum xpc_retval reason, partid_t partid, int channel, void *data, void *key) { long bp; DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); DBUG_ON(channel != XPC_NET_CHANNEL); switch (reason) { case xpcMsgReceived: /* message received */ DBUG_ON(data == NULL); xpnet_receive(partid, channel, (struct xpnet_message *)data); break; case xpcConnected: /* connection completed to a partition */ spin_lock_bh(&xpnet_broadcast_lock); xpnet_broadcast_partitions |= 1UL << (partid - 1); bp = xpnet_broadcast_partitions; spin_unlock_bh(&xpnet_broadcast_lock); netif_carrier_on(xpnet_device); dev_dbg(xpnet, "%s connection created to partition %d; " "xpnet_broadcast_partitions=0x%lx\n", xpnet_device->name, partid, bp); break; default: spin_lock_bh(&xpnet_broadcast_lock); xpnet_broadcast_partitions &= ~(1UL << (partid - 1)); bp = xpnet_broadcast_partitions; spin_unlock_bh(&xpnet_broadcast_lock); if (bp == 0) { netif_carrier_off(xpnet_device); } dev_dbg(xpnet, "%s disconnected from partition %d; " "xpnet_broadcast_partitions=0x%lx\n", xpnet_device->name, partid, bp); break; } } static int xpnet_dev_open(struct net_device *dev) { enum xpc_retval ret; dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, " "%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity, XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS); ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL, XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS); if (ret != xpcSuccess) { dev_err(xpnet, "ifconfig up of %s failed on XPC connect, " "ret=%d\n", dev->name, ret); return -ENOMEM; } dev_dbg(xpnet, "ifconfig up of %s; XPC connected\n", dev->name); return 0; } static int xpnet_dev_stop(struct net_device *dev) { xpc_disconnect(XPC_NET_CHANNEL); dev_dbg(xpnet, "ifconfig down of %s; XPC disconnected\n", dev->name); return 0; } static int xpnet_dev_change_mtu(struct net_device *dev, int new_mtu) { /* 68 comes from min TCP+IP+MAC header */ if ((new_mtu < 68) || (new_mtu > XPNET_MAX_MTU)) { dev_err(xpnet, "ifconfig %s mtu %d failed; value must be " "between 68 and %ld\n", dev->name, new_mtu, XPNET_MAX_MTU); return -EINVAL; } dev->mtu = new_mtu; dev_dbg(xpnet, "ifconfig %s mtu set to %d\n", dev->name, new_mtu); return 0; } /* * Required for the net_device structure. */ static int xpnet_dev_set_config(struct net_device *dev, struct ifmap *new_map) { return 0; } /* * Return statistics to the caller. */ static struct net_device_stats * xpnet_dev_get_stats(struct net_device *dev) { struct xpnet_dev_private *priv; priv = (struct xpnet_dev_private *)dev->priv; return &priv->stats; } /* * Notification that the other end has received the message and * DMA'd the skb information. At this point, they are done with * our side. When all recipients are done processing, we * release the skb and then release our pending message structure. */ static void xpnet_send_completed(enum xpc_retval reason, partid_t partid, int channel, void *__qm) { struct xpnet_pending_msg *queued_msg = (struct xpnet_pending_msg *)__qm; DBUG_ON(queued_msg == NULL); dev_dbg(xpnet, "message to %d notified with reason %d\n", partid, reason); if (atomic_dec_return(&queued_msg->use_count) == 0) { dev_dbg(xpnet, "all acks for skb->head=-x%p\n", (void *)queued_msg->skb->head); dev_kfree_skb_any(queued_msg->skb); kfree(queued_msg); } } /* * Network layer has formatted a packet (skb) and is ready to place it * "on the wire". Prepare and send an xpnet_message to all partitions * which have connected with us and are targets of this packet. * * MAC-NOTE: For the XPNET driver, the MAC address contains the * destination partition_id. If the destination partition id word * is 0xff, this packet is to broadcast to all partitions. */ static int xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct xpnet_pending_msg *queued_msg; enum xpc_retval ret; struct xpnet_message *msg; u64 start_addr, end_addr; long dp; u8 second_mac_octet; partid_t dest_partid; struct xpnet_dev_private *priv; u16 embedded_bytes; priv = (struct xpnet_dev_private *)dev->priv; dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p " "skb->end=0x%p skb->len=%d\n", (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), skb->len); /* * The xpnet_pending_msg tracks how many outstanding * xpc_send_notifies are relying on this skb. When none * remain, release the skb. */ queued_msg = kmalloc(sizeof(struct xpnet_pending_msg), GFP_ATOMIC); if (queued_msg == NULL) { dev_warn(xpnet, "failed to kmalloc %ld bytes; dropping " "packet\n", sizeof(struct xpnet_pending_msg)); priv->stats.tx_errors++; return -ENOMEM; } /* get the beginning of the first cacheline and end of last */ start_addr = ((u64)skb->data & ~(L1_CACHE_BYTES - 1)); end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb)); /* calculate how many bytes to embed in the XPC message */ embedded_bytes = 0; if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) { /* skb->data does fit so embed */ embedded_bytes = skb->len; } /* * Since the send occurs asynchronously, we set the count to one * and begin sending. Any sends that happen to complete before * we are done sending will not free the skb. We will be left * with that task during exit. This also handles the case of * a packet destined for a partition which is no longer up. */ atomic_set(&queued_msg->use_count, 1); queued_msg->skb = skb; second_mac_octet = skb->data[XPNET_PARTID_OCTET]; if (second_mac_octet == 0xff) { /* we are being asked to broadcast to all partitions */ dp = xpnet_broadcast_partitions; } else if (second_mac_octet != 0) { dp = xpnet_broadcast_partitions & (1UL << (second_mac_octet - 1)); } else { /* 0 is an invalid partid. Ignore */ dp = 0; } dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp); /* * If we wanted to allow promiscuous mode to work like an * unswitched network, this would be a good point to OR in a * mask of partitions which should be receiving all packets. */ /* * Main send loop. */ for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS; dest_partid++) { if (!(dp & (1UL << (dest_partid - 1)))) { /* not destined for this partition */ continue; } /* remove this partition from the destinations mask */ dp &= ~(1UL << (dest_partid - 1)); /* found a partition to send to */ ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL, XPC_NOWAIT, (void **)&msg); if (unlikely(ret != xpcSuccess)) { continue; } msg->embedded_bytes = embedded_bytes; if (unlikely(embedded_bytes != 0)) { msg->version = XPNET_VERSION_EMBED; dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n", &msg->data, skb->data, (size_t)embedded_bytes); skb_copy_from_linear_data(skb, &msg->data, (size_t)embedded_bytes); } else { msg->version = XPNET_VERSION; } msg->magic = XPNET_MAGIC; msg->size = end_addr - start_addr; msg->leadin_ignore = (u64)skb->data - start_addr; msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb); msg->buf_pa = __pa(start_addr); dev_dbg(xpnet, "sending XPC message to %d:%d\n" KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, " "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n", dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size, msg->leadin_ignore, msg->tailout_ignore); atomic_inc(&queued_msg->use_count); ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg, xpnet_send_completed, queued_msg); if (unlikely(ret != xpcSuccess)) { atomic_dec(&queued_msg->use_count); continue; } } if (atomic_dec_return(&queued_msg->use_count) == 0) { dev_dbg(xpnet, "no partitions to receive packet destined for " "%d\n", dest_partid); dev_kfree_skb(skb); kfree(queued_msg); } priv->stats.tx_packets++; priv->stats.tx_bytes += skb->len; return 0; } /* * Deal with transmit timeouts coming from the network layer. */ static void xpnet_dev_tx_timeout(struct net_device *dev) { struct xpnet_dev_private *priv; priv = (struct xpnet_dev_private *)dev->priv; priv->stats.tx_errors++; return; } static int __init xpnet_init(void) { int i; u32 license_num; int result = -ENOMEM; if (!ia64_platform_is("sn2")) { return -ENODEV; } dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME); /* * use ether_setup() to init the majority of our device * structure and then override the necessary pieces. */ xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private), XPNET_DEVICE_NAME, ether_setup); if (xpnet_device == NULL) { return -ENOMEM; } netif_carrier_off(xpnet_device); xpnet_device->mtu = XPNET_DEF_MTU; xpnet_device->change_mtu = xpnet_dev_change_mtu; xpnet_device->open = xpnet_dev_open; xpnet_device->get_stats = xpnet_dev_get_stats; xpnet_device->stop = xpnet_dev_stop; xpnet_device->hard_start_xmit = xpnet_dev_hard_start_xmit; xpnet_device->tx_timeout = xpnet_dev_tx_timeout; xpnet_device->set_config = xpnet_dev_set_config; /* * Multicast assumes the LSB of the first octet is set for multicast * MAC addresses. We chose the first octet of the MAC to be unlikely * to collide with any vendor's officially issued MAC. */ xpnet_device->dev_addr[0] = 0xfe; xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id; license_num = sn_partition_serial_number_val(); for (i = 3; i >= 0; i--) { xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] = license_num & 0xff; license_num = license_num >> 8; } /* * ether_setup() sets this to a multicast device. We are * really not supporting multicast at this time. */ xpnet_device->flags &= ~IFF_MULTICAST; /* * No need to checksum as it is a DMA transfer. The BTE will * report an error if the data is not retrievable and the * packet will be dropped. */ xpnet_device->features = NETIF_F_NO_CSUM; result = register_netdev(xpnet_device); if (result != 0) { free_netdev(xpnet_device); } return result; } module_init(xpnet_init); static void __exit xpnet_exit(void) { dev_info(xpnet, "unregistering network device %s\n", xpnet_device[0].name); unregister_netdev(xpnet_device); free_netdev(xpnet_device); } module_exit(xpnet_exit); MODULE_AUTHOR("Silicon Graphics, Inc."); MODULE_DESCRIPTION("Cross Partition Network adapter (XPNET)"); MODULE_LICENSE("GPL");