menu "Bluetooth device drivers" depends on BT config BT_BCM tristate config BT_HCIBTUSB tristate "HCI USB driver" depends on USB select BT_BCM help Bluetooth HCI USB driver. This driver is required if you want to use Bluetooth devices with USB interface. Say Y here to compile support for Bluetooth USB devices into the kernel or say M to compile it as module (btusb). config BT_HCIBTSDIO tristate "HCI SDIO driver" depends on MMC help Bluetooth HCI SDIO driver. This driver is required if you want to use Bluetooth device with SDIO interface. Say Y here to compile support for Bluetooth SDIO devices into the kernel or say M to compile it as module (btsdio). config BT_HCIUART tristate "HCI UART driver" depends on TTY help Bluetooth HCI UART driver. This driver is required if you want to use Bluetooth devices with serial port interface. You will also need this driver if you have UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card adapter and BrainBoxes Bluetooth PC Card. Say Y here to compile support for Bluetooth UART devices into the kernel or say M to compile it as module (hci_uart). config BT_HCIUART_H4 bool "UART (H4) protocol support" depends on BT_HCIUART help UART (H4) is serial protocol for communication between Bluetooth device and host. This protocol is required for most Bluetooth devices with UART interface, including PCMCIA and CF cards. Say Y here to compile support for HCI UART (H4) protocol. config BT_HCIUART_BCSP bool "BCSP protocol support" depends on BT_HCIUART select BITREVERSE help BCSP (BlueCore Serial Protocol) is serial protocol for communication between Bluetooth device and host. This protocol is required for non USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and CF cards. Say Y here to compile support for HCI BCSP protocol. config BT_HCIUART_ATH3K bool "Atheros AR300x serial support" depends on BT_HCIUART select BT_HCIUART_H4 help HCIATH3K (HCI Atheros AR300x) is a serial protocol for communication between host and Atheros AR300x Bluetooth devices. This protocol enables AR300x chips to be enabled with power management support. Enable this if you have Atheros AR300x serial Bluetooth device. Say Y here to compile support for HCI UART ATH3K protocol. config BT_HCIUART_LL bool "HCILL protocol support" depends on BT_HCIUART help HCILL (HCI Low Level) is a serial protocol for communication between Bluetooth device and host. This protocol is required for serial Bluetooth devices that are based on Texas Instruments' BRF chips. Say Y here to compile support for HCILL protocol. config BT_HCIUART_3WIRE bool "Three-wire UART (H5) protocol support" depends on BT_HCIUART help The HCI Three-wire UART Transport Layer makes it possible to user the Bluetooth HCI over a serial port interface. The HCI Three-wire UART Transport Layer assumes that the UART communication may have bit errors, overrun errors or burst errors and thereby making CTS/RTS lines unnecessary. Say Y here to compile support for Three-wire UART protocol. config BT_HCIUART_INTEL bool "Intel protocol support" depends on BT_HCIUART help The Intel protocol support enables Bluetooth HCI over serial port interface for Intel Bluetooth controllers. Say Y here to compile support for Intel protocol. config BT_HCIUART_BCM bool "Broadcom protocol support" depends on BT_HCIUART select BT_BCM help The Broadcom protocol support enables Bluetooth HCI over serial port interface for Broadcom Bluetooth controllers. Say Y here to compile support for Broadcom protocol. config BT_HCIBCM203X tristate "HCI BCM203x USB driver" depends on USB select FW_LOADER help Bluetooth HCI BCM203x USB driver. This driver provides the firmware loading mechanism for the Broadcom Blutonium based devices. Say Y here to compile support for HCI BCM203x devices into the kernel or say M to compile it as module (bcm203x). config BT_HCIBPA10X tristate "HCI BPA10x USB driver" depends on USB help Bluetooth HCI BPA10x USB driver. This driver provides support for the Digianswer BPA 100/105 Bluetooth sniffer devices. Say Y here to compile support for HCI BPA10x devices into the kernel or say M to compile it as module (bpa10x). config BT_HCIBFUSB tristate "HCI BlueFRITZ! USB driver" depends on USB select FW_LOADER help Bluetooth HCI BlueFRITZ! USB driver. This driver provides support for Bluetooth USB devices with AVM interface: AVM BlueFRITZ! USB Say Y here to compile support for HCI BFUSB devices into the kernel or say M to compile it as module (bfusb). config BT_HCIDTL1 tristate "HCI DTL1 (PC Card) driver" depends on PCMCIA help Bluetooth HCI DTL1 (PC Card) driver. This driver provides support for Bluetooth PCMCIA devices with Nokia DTL1 interface: Nokia Bluetooth Card Socket Bluetooth CF Card Say Y here to compile support for HCI DTL1 devices into the kernel or say M to compile it as module (dtl1_cs). config BT_HCIBT3C tristate "HCI BT3C (PC Card) driver" depends on PCMCIA select FW_LOADER help Bluetooth HCI BT3C (PC Card) driver. This driver provides support for Bluetooth PCMCIA devices with 3Com BT3C interface: 3Com Bluetooth Card (3CRWB6096) HP Bluetooth Card Say Y here to compile support for HCI BT3C devices into the kernel or say M to compile it as module (bt3c_cs). config BT_HCIBLUECARD tristate "HCI BlueCard (PC Card) driver" depends on PCMCIA help Bluetooth HCI BlueCard (PC Card) driver. This driver provides support for Bluetooth PCMCIA devices with Anycom BlueCard interface: Anycom Bluetooth PC Card Anycom Bluetooth CF Card Say Y here to compile support for HCI BlueCard devices into the kernel or say M to compile it as module (bluecard_cs). config BT_HCIBTUART tristate "HCI UART (PC Card) device driver" depends on PCMCIA help Bluetooth HCI UART (PC Card) driver. This driver provides support for Bluetooth PCMCIA devices with an UART interface: Xircom CreditCard Bluetooth Adapter Xircom RealPort2 Bluetooth Adapter Sphinx PICO Card H-Soft blue+Card Cyber-blue Compact Flash Card Say Y here to compile support for HCI UART devices into the kernel or say M to compile it as module (btuart_cs). config BT_HCIVHCI tristate "HCI VHCI (Virtual HCI device) driver" help Bluetooth Virtual HCI device driver. This driver is required if you want to use HCI Emulation software. Say Y here to compile support for virtual HCI devices into the kernel or say M to compile it as module (hci_vhci). config BT_MRVL tristate "Marvell Bluetooth driver support" help The core driver to support Marvell Bluetooth devices. This driver is required if you want to support Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897. Say Y here to compile Marvell Bluetooth driver into the kernel or say M to compile it as module. config BT_MRVL_SDIO tristate "Marvell BT-over-SDIO driver" depends on BT_MRVL && MMC select FW_LOADER select WANT_DEV_COREDUMP help The driver for Marvell Bluetooth chipsets with SDIO interface. This driver is required if you want to use Marvell Bluetooth devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897 chipsets are supported. Say Y here to compile support for Marvell BT-over-SDIO driver into the kernel or say M to compile it as module. config BT_ATH3K tristate "Atheros firmware download driver" depends on BT_HCIBTUSB select FW_LOADER help Bluetooth firmware download driver. This driver loads the firmware into the Atheros Bluetooth chipset. Say Y here to compile support for "Atheros firmware download driver" into the kernel or say M to compile it as module (ath3k). config BT_WILINK tristate "Texas Instruments WiLink7 driver" depends on TI_ST help This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS combo devices. This makes use of shared transport line discipline core driver to communicate with the BT core of the combo chip. Say Y here to compile support for Texas Instrument's WiLink7 driver into the kernel or say M to compile it as module (btwilink). endmenu