/* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*- */ /* * * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sub license, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * */ #include #include "drmP.h" #include "drm.h" #include "i915_drm.h" #include "i915_drv.h" #include "drm_pciids.h" #include #include "drm_crtc_helper.h" static int i915_modeset = -1; module_param_named(modeset, i915_modeset, int, 0400); unsigned int i915_fbpercrtc = 0; module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400); unsigned int i915_powersave = 1; module_param_named(powersave, i915_powersave, int, 0400); static struct drm_driver driver; static struct pci_device_id pciidlist[] = { i915_PCI_IDS }; #if defined(CONFIG_DRM_I915_KMS) MODULE_DEVICE_TABLE(pci, pciidlist); #endif static int i915_suspend(struct drm_device *dev, pm_message_t state) { struct drm_i915_private *dev_priv = dev->dev_private; if (!dev || !dev_priv) { DRM_ERROR("dev: %p, dev_priv: %p\n", dev, dev_priv); DRM_ERROR("DRM not initialized, aborting suspend.\n"); return -ENODEV; } if (state.event == PM_EVENT_PRETHAW) return 0; pci_save_state(dev->pdev); /* If KMS is active, we do the leavevt stuff here */ if (drm_core_check_feature(dev, DRIVER_MODESET)) { if (i915_gem_idle(dev)) dev_err(&dev->pdev->dev, "GEM idle failed, resume may fail\n"); drm_irq_uninstall(dev); } i915_save_state(dev); intel_opregion_free(dev, 1); if (state.event == PM_EVENT_SUSPEND) { /* Shut down the device */ pci_disable_device(dev->pdev); pci_set_power_state(dev->pdev, PCI_D3hot); } dev_priv->suspended = 1; return 0; } static int i915_resume(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int ret = 0; pci_set_power_state(dev->pdev, PCI_D0); pci_restore_state(dev->pdev); if (pci_enable_device(dev->pdev)) return -1; pci_set_master(dev->pdev); i915_restore_state(dev); intel_opregion_init(dev, 1); /* KMS EnterVT equivalent */ if (drm_core_check_feature(dev, DRIVER_MODESET)) { mutex_lock(&dev->struct_mutex); dev_priv->mm.suspended = 0; ret = i915_gem_init_ringbuffer(dev); if (ret != 0) ret = -1; mutex_unlock(&dev->struct_mutex); drm_irq_install(dev); } if (drm_core_check_feature(dev, DRIVER_MODESET)) { /* Resume the modeset for every activated CRTC */ drm_helper_resume_force_mode(dev); } dev_priv->suspended = 0; return ret; } /** * i965_reset - reset chip after a hang * @dev: drm device to reset * @flags: reset domains * * Reset the chip. Useful if a hang is detected. Returns zero on successful * reset or otherwise an error code. * * Procedure is fairly simple: * - reset the chip using the reset reg * - re-init context state * - re-init hardware status page * - re-init ring buffer * - re-init interrupt state * - re-init display */ int i965_reset(struct drm_device *dev, u8 flags) { drm_i915_private_t *dev_priv = dev->dev_private; unsigned long timeout; u8 gdrst; /* * We really should only reset the display subsystem if we actually * need to */ bool need_display = true; mutex_lock(&dev->struct_mutex); /* * Clear request list */ i915_gem_retire_requests(dev); if (need_display) i915_save_display(dev); if (IS_I965G(dev) || IS_G4X(dev)) { /* * Set the domains we want to reset, then the reset bit (bit 0). * Clear the reset bit after a while and wait for hardware status * bit (bit 1) to be set */ pci_read_config_byte(dev->pdev, GDRST, &gdrst); pci_write_config_byte(dev->pdev, GDRST, gdrst | flags | ((flags == GDRST_FULL) ? 0x1 : 0x0)); udelay(50); pci_write_config_byte(dev->pdev, GDRST, gdrst & 0xfe); /* ...we don't want to loop forever though, 500ms should be plenty */ timeout = jiffies + msecs_to_jiffies(500); do { udelay(100); pci_read_config_byte(dev->pdev, GDRST, &gdrst); } while ((gdrst & 0x1) && time_after(timeout, jiffies)); if (gdrst & 0x1) { WARN(true, "i915: Failed to reset chip\n"); mutex_unlock(&dev->struct_mutex); return -EIO; } } else { DRM_ERROR("Error occurred. Don't know how to reset this chip.\n"); return -ENODEV; } /* Ok, now get things going again... */ /* * Everything depends on having the GTT running, so we need to start * there. Fortunately we don't need to do this unless we reset the * chip at a PCI level. * * Next we need to restore the context, but we don't use those * yet either... * * Ring buffer needs to be re-initialized in the KMS case, or if X * was running at the time of the reset (i.e. we weren't VT * switched away). */ if (drm_core_check_feature(dev, DRIVER_MODESET) || !dev_priv->mm.suspended) { drm_i915_ring_buffer_t *ring = &dev_priv->ring; struct drm_gem_object *obj = ring->ring_obj; struct drm_i915_gem_object *obj_priv = obj->driver_private; dev_priv->mm.suspended = 0; /* Stop the ring if it's running. */ I915_WRITE(PRB0_CTL, 0); I915_WRITE(PRB0_TAIL, 0); I915_WRITE(PRB0_HEAD, 0); /* Initialize the ring. */ I915_WRITE(PRB0_START, obj_priv->gtt_offset); I915_WRITE(PRB0_CTL, ((obj->size - 4096) & RING_NR_PAGES) | RING_NO_REPORT | RING_VALID); if (!drm_core_check_feature(dev, DRIVER_MODESET)) i915_kernel_lost_context(dev); else { ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR; ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR; ring->space = ring->head - (ring->tail + 8); if (ring->space < 0) ring->space += ring->Size; } mutex_unlock(&dev->struct_mutex); drm_irq_uninstall(dev); drm_irq_install(dev); mutex_lock(&dev->struct_mutex); } /* * Display needs restore too... */ if (need_display) i915_restore_display(dev); mutex_unlock(&dev->struct_mutex); return 0; } static int __devinit i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { return drm_get_dev(pdev, ent, &driver); } static void i915_pci_remove(struct pci_dev *pdev) { struct drm_device *dev = pci_get_drvdata(pdev); drm_put_dev(dev); } static int i915_pci_suspend(struct pci_dev *pdev, pm_message_t state) { struct drm_device *dev = pci_get_drvdata(pdev); return i915_suspend(dev, state); } static int i915_pci_resume(struct pci_dev *pdev) { struct drm_device *dev = pci_get_drvdata(pdev); return i915_resume(dev); } static struct vm_operations_struct i915_gem_vm_ops = { .fault = i915_gem_fault, .open = drm_gem_vm_open, .close = drm_gem_vm_close, }; static struct drm_driver driver = { /* don't use mtrr's here, the Xserver or user space app should * deal with them for intel hardware. */ .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/ DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM, .load = i915_driver_load, .unload = i915_driver_unload, .open = i915_driver_open, .lastclose = i915_driver_lastclose, .preclose = i915_driver_preclose, .postclose = i915_driver_postclose, .suspend = i915_suspend, .resume = i915_resume, .device_is_agp = i915_driver_device_is_agp, .enable_vblank = i915_enable_vblank, .disable_vblank = i915_disable_vblank, .irq_preinstall = i915_driver_irq_preinstall, .irq_postinstall = i915_driver_irq_postinstall, .irq_uninstall = i915_driver_irq_uninstall, .irq_handler = i915_driver_irq_handler, .reclaim_buffers = drm_core_reclaim_buffers, .get_map_ofs = drm_core_get_map_ofs, .get_reg_ofs = drm_core_get_reg_ofs, .master_create = i915_master_create, .master_destroy = i915_master_destroy, #if defined(CONFIG_DEBUG_FS) .debugfs_init = i915_debugfs_init, .debugfs_cleanup = i915_debugfs_cleanup, #endif .gem_init_object = i915_gem_init_object, .gem_free_object = i915_gem_free_object, .gem_vm_ops = &i915_gem_vm_ops, .ioctls = i915_ioctls, .fops = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, .ioctl = drm_ioctl, .mmap = drm_gem_mmap, .poll = drm_poll, .fasync = drm_fasync, #ifdef CONFIG_COMPAT .compat_ioctl = i915_compat_ioctl, #endif }, .pci_driver = { .name = DRIVER_NAME, .id_table = pciidlist, .probe = i915_pci_probe, .remove = i915_pci_remove, #ifdef CONFIG_PM .resume = i915_pci_resume, .suspend = i915_pci_suspend, #endif }, .name = DRIVER_NAME, .desc = DRIVER_DESC, .date = DRIVER_DATE, .major = DRIVER_MAJOR, .minor = DRIVER_MINOR, .patchlevel = DRIVER_PATCHLEVEL, }; static int __init i915_init(void) { driver.num_ioctls = i915_max_ioctl; /* * If CONFIG_DRM_I915_KMS is set, default to KMS unless * explicitly disabled with the module pararmeter. * * Otherwise, just follow the parameter (defaulting to off). * * Allow optional vga_text_mode_force boot option to override * the default behavior. */ #if defined(CONFIG_DRM_I915_KMS) if (i915_modeset != 0) driver.driver_features |= DRIVER_MODESET; #endif if (i915_modeset == 1) driver.driver_features |= DRIVER_MODESET; #ifdef CONFIG_VGA_CONSOLE if (vgacon_text_force() && i915_modeset == -1) driver.driver_features &= ~DRIVER_MODESET; #endif return drm_init(&driver); } static void __exit i915_exit(void) { drm_exit(&driver); } module_init(i915_init); module_exit(i915_exit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL and additional rights");