/* * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. * Copyright (c) 2009-2010, Code Aurora Forum. * Copyright 2016 Intel Corp. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #ifndef _DRM_DRV_H_ #define _DRM_DRV_H_ #include #include struct drm_device; struct drm_file; struct drm_gem_object; struct drm_master; struct drm_minor; struct dma_buf_attachment; struct drm_display_mode; struct drm_mode_create_dumb; /* driver capabilities and requirements mask */ #define DRIVER_USE_AGP 0x1 #define DRIVER_LEGACY 0x2 #define DRIVER_PCI_DMA 0x8 #define DRIVER_SG 0x10 #define DRIVER_HAVE_DMA 0x20 #define DRIVER_HAVE_IRQ 0x40 #define DRIVER_IRQ_SHARED 0x80 #define DRIVER_GEM 0x1000 #define DRIVER_MODESET 0x2000 #define DRIVER_PRIME 0x4000 #define DRIVER_RENDER 0x8000 #define DRIVER_ATOMIC 0x10000 #define DRIVER_KMS_LEGACY_CONTEXT 0x20000 /** * struct drm_driver - DRM driver structure * * This structure represent the common code for a family of cards. There will * one drm_device for each card present in this family. It contains lots of * vfunc entries, and a pile of those probably should be moved to more * appropriate places like &drm_mode_config_funcs or into a new operations * structure for GEM drivers. */ struct drm_driver { int (*load) (struct drm_device *, unsigned long flags); int (*firstopen) (struct drm_device *); int (*open) (struct drm_device *, struct drm_file *); void (*preclose) (struct drm_device *, struct drm_file *file_priv); void (*postclose) (struct drm_device *, struct drm_file *); void (*lastclose) (struct drm_device *); int (*unload) (struct drm_device *); int (*dma_ioctl) (struct drm_device *dev, void *data, struct drm_file *file_priv); int (*dma_quiescent) (struct drm_device *); int (*context_dtor) (struct drm_device *dev, int context); int (*set_busid)(struct drm_device *dev, struct drm_master *master); /** * @get_vblank_counter: * * Driver callback for fetching a raw hardware vblank counter for the * CRTC specified with the pipe argument. If a device doesn't have a * hardware counter, the driver can simply use * drm_vblank_no_hw_counter() function. The DRM core will account for * missed vblank events while interrupts where disabled based on system * timestamps. * * Wraparound handling and loss of events due to modesetting is dealt * with in the DRM core code, as long as drivers call * drm_crtc_vblank_off() and drm_crtc_vblank_on() when disabling or * enabling a CRTC. * * Returns: * * Raw vblank counter value. */ u32 (*get_vblank_counter) (struct drm_device *dev, unsigned int pipe); /** * @enable_vblank: * * Enable vblank interrupts for the CRTC specified with the pipe * argument. * * Returns: * * Zero on success, appropriate errno if the given @crtc's vblank * interrupt cannot be enabled. */ int (*enable_vblank) (struct drm_device *dev, unsigned int pipe); /** * @disable_vblank: * * Disable vblank interrupts for the CRTC specified with the pipe * argument. */ void (*disable_vblank) (struct drm_device *dev, unsigned int pipe); /** * @device_is_agp: * * Called by drm_device_is_agp(). Typically used to determine if a card * is really attached to AGP or not. * * Returns: * * One of three values is returned depending on whether or not the * card is absolutely not AGP (return of 0), absolutely is AGP * (return of 1), or may or may not be AGP (return of 2). */ int (*device_is_agp) (struct drm_device *dev); /** * @get_scanout_position: * * Called by vblank timestamping code. * * Returns the current display scanout position from a crtc, and an * optional accurate ktime_get() timestamp of when position was * measured. Note that this is a helper callback which is only used if a * driver uses drm_calc_vbltimestamp_from_scanoutpos() for the * @get_vblank_timestamp callback. * * Parameters: * * dev: * DRM device. * pipe: * Id of the crtc to query. * flags: * Flags from the caller (DRM_CALLED_FROM_VBLIRQ or 0). * vpos: * Target location for current vertical scanout position. * hpos: * Target location for current horizontal scanout position. * stime: * Target location for timestamp taken immediately before * scanout position query. Can be NULL to skip timestamp. * etime: * Target location for timestamp taken immediately after * scanout position query. Can be NULL to skip timestamp. * mode: * Current display timings. * * Returns vpos as a positive number while in active scanout area. * Returns vpos as a negative number inside vblank, counting the number * of scanlines to go until end of vblank, e.g., -1 means "one scanline * until start of active scanout / end of vblank." * * Returns: * * Flags, or'ed together as follows: * * DRM_SCANOUTPOS_VALID: * Query successful. * DRM_SCANOUTPOS_INVBL: * Inside vblank. * DRM_SCANOUTPOS_ACCURATE: Returned position is accurate. A lack of * this flag means that returned position may be offset by a * constant but unknown small number of scanlines wrt. real scanout * position. * */ int (*get_scanout_position) (struct drm_device *dev, unsigned int pipe, unsigned int flags, int *vpos, int *hpos, ktime_t *stime, ktime_t *etime, const struct drm_display_mode *mode); /** * @get_vblank_timestamp: * * Called by drm_get_last_vbltimestamp(). Should return a precise * timestamp when the most recent VBLANK interval ended or will end. * * Specifically, the timestamp in @vblank_time should correspond as * closely as possible to the time when the first video scanline of * the video frame after the end of VBLANK will start scanning out, * the time immediately after end of the VBLANK interval. If the * @crtc is currently inside VBLANK, this will be a time in the future. * If the @crtc is currently scanning out a frame, this will be the * past start time of the current scanout. This is meant to adhere * to the OpenML OML_sync_control extension specification. * * Paramters: * * dev: * dev DRM device handle. * pipe: * crtc for which timestamp should be returned. * max_error: * Maximum allowable timestamp error in nanoseconds. * Implementation should strive to provide timestamp * with an error of at most max_error nanoseconds. * Returns true upper bound on error for timestamp. * vblank_time: * Target location for returned vblank timestamp. * flags: * 0 = Defaults, no special treatment needed. * DRM_CALLED_FROM_VBLIRQ = Function is called from vblank * irq handler. Some drivers need to apply some workarounds * for gpu-specific vblank irq quirks if flag is set. * * Returns: * * Zero if timestamping isn't supported in current display mode or a * negative number on failure. A positive status code on success, * which describes how the vblank_time timestamp was computed. */ int (*get_vblank_timestamp) (struct drm_device *dev, unsigned int pipe, int *max_error, struct timeval *vblank_time, unsigned flags); /* these have to be filled in */ irqreturn_t(*irq_handler) (int irq, void *arg); void (*irq_preinstall) (struct drm_device *dev); int (*irq_postinstall) (struct drm_device *dev); void (*irq_uninstall) (struct drm_device *dev); /** * @master_create: * * Called whenever a new master is created. Only used by vmwgfx. */ int (*master_create)(struct drm_device *dev, struct drm_master *master); /** * @master_destroy: * * Called whenever a master is destroyed. Only used by vmwgfx. */ void (*master_destroy)(struct drm_device *dev, struct drm_master *master); /** * @master_set: * * Called whenever the minor master is set. Only used by vmwgfx. */ int (*master_set)(struct drm_device *dev, struct drm_file *file_priv, bool from_open); /** * @master_drop: * * Called whenever the minor master is dropped. Only used by vmwgfx. */ void (*master_drop)(struct drm_device *dev, struct drm_file *file_priv); int (*debugfs_init)(struct drm_minor *minor); void (*debugfs_cleanup)(struct drm_minor *minor); /** * @gem_free_object: deconstructor for drm_gem_objects * * This is deprecated and should not be used by new drivers. Use * @gem_free_object_unlocked instead. */ void (*gem_free_object) (struct drm_gem_object *obj); /** * @gem_free_object_unlocked: deconstructor for drm_gem_objects * * This is for drivers which are not encumbered with dev->struct_mutex * legacy locking schemes. Use this hook instead of @gem_free_object. */ void (*gem_free_object_unlocked) (struct drm_gem_object *obj); int (*gem_open_object) (struct drm_gem_object *, struct drm_file *); void (*gem_close_object) (struct drm_gem_object *, struct drm_file *); /** * Hook for allocating the GEM object struct, for use by core * helpers. */ struct drm_gem_object *(*gem_create_object)(struct drm_device *dev, size_t size); /* prime: */ /* export handle -> fd (see drm_gem_prime_handle_to_fd() helper) */ int (*prime_handle_to_fd)(struct drm_device *dev, struct drm_file *file_priv, uint32_t handle, uint32_t flags, int *prime_fd); /* import fd -> handle (see drm_gem_prime_fd_to_handle() helper) */ int (*prime_fd_to_handle)(struct drm_device *dev, struct drm_file *file_priv, int prime_fd, uint32_t *handle); /* export GEM -> dmabuf */ struct dma_buf * (*gem_prime_export)(struct drm_device *dev, struct drm_gem_object *obj, int flags); /* import dmabuf -> GEM */ struct drm_gem_object * (*gem_prime_import)(struct drm_device *dev, struct dma_buf *dma_buf); /* low-level interface used by drm_gem_prime_{import,export} */ int (*gem_prime_pin)(struct drm_gem_object *obj); void (*gem_prime_unpin)(struct drm_gem_object *obj); struct reservation_object * (*gem_prime_res_obj)( struct drm_gem_object *obj); struct sg_table *(*gem_prime_get_sg_table)(struct drm_gem_object *obj); struct drm_gem_object *(*gem_prime_import_sg_table)( struct drm_device *dev, struct dma_buf_attachment *attach, struct sg_table *sgt); void *(*gem_prime_vmap)(struct drm_gem_object *obj); void (*gem_prime_vunmap)(struct drm_gem_object *obj, void *vaddr); int (*gem_prime_mmap)(struct drm_gem_object *obj, struct vm_area_struct *vma); /* vga arb irq handler */ void (*vgaarb_irq)(struct drm_device *dev, bool state); /** * @dumb_create: * * This creates a new dumb buffer in the driver's backing storage manager (GEM, * TTM or something else entirely) and returns the resulting buffer handle. This * handle can then be wrapped up into a framebuffer modeset object. * * Note that userspace is not allowed to use such objects for render * acceleration - drivers must create their own private ioctls for such a use * case. * * Width, height and depth are specified in the &drm_mode_create_dumb * argument. The callback needs to fill the handle, pitch and size for * the created buffer. * * Called by the user via ioctl. * * Returns: * * Zero on success, negative errno on failure. */ int (*dumb_create)(struct drm_file *file_priv, struct drm_device *dev, struct drm_mode_create_dumb *args); /** * @dumb_map_offset: * * Allocate an offset in the drm device node's address space to be able to * memory map a dumb buffer. GEM-based drivers must use * drm_gem_create_mmap_offset() to implement this. * * Called by the user via ioctl. * * Returns: * * Zero on success, negative errno on failure. */ int (*dumb_map_offset)(struct drm_file *file_priv, struct drm_device *dev, uint32_t handle, uint64_t *offset); /** * @dumb_destroy: * * This destroys the userspace handle for the given dumb backing storage buffer. * Since buffer objects must be reference counted in the kernel a buffer object * won't be immediately freed if a framebuffer modeset object still uses it. * * Called by the user via ioctl. * * Returns: * * Zero on success, negative errno on failure. */ int (*dumb_destroy)(struct drm_file *file_priv, struct drm_device *dev, uint32_t handle); /* Driver private ops for this object */ const struct vm_operations_struct *gem_vm_ops; int major; int minor; int patchlevel; char *name; char *desc; char *date; u32 driver_features; int dev_priv_size; const struct drm_ioctl_desc *ioctls; int num_ioctls; const struct file_operations *fops; /* List of devices hanging off this driver with stealth attach. */ struct list_head legacy_dev_list; }; extern __printf(6, 7) void drm_dev_printk(const struct device *dev, const char *level, unsigned int category, const char *function_name, const char *prefix, const char *format, ...); extern __printf(3, 4) void drm_printk(const char *level, unsigned int category, const char *format, ...); extern unsigned int drm_debug; int drm_dev_init(struct drm_device *dev, struct drm_driver *driver, struct device *parent); struct drm_device *drm_dev_alloc(struct drm_driver *driver, struct device *parent); int drm_dev_register(struct drm_device *dev, unsigned long flags); void drm_dev_unregister(struct drm_device *dev); void drm_dev_ref(struct drm_device *dev); void drm_dev_unref(struct drm_device *dev); void drm_put_dev(struct drm_device *dev); void drm_unplug_dev(struct drm_device *dev); #endif