#ifndef _ASM_X86_BITOPS_H #define _ASM_X86_BITOPS_H /* * Copyright 1992, Linus Torvalds. */ #ifndef _LINUX_BITOPS_H #error only can be included directly #endif #include #include /* * These have to be done with inline assembly: that way the bit-setting * is guaranteed to be atomic. All bit operations return 0 if the bit * was cleared before the operation and != 0 if it was not. * * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). */ #if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1) /* Technically wrong, but this avoids compilation errors on some gcc versions. */ #define ADDR "=m" (*(volatile long *)addr) #define BIT_ADDR "=m" (((volatile int *)addr)[nr >> 5]) #else #define ADDR "+m" (*(volatile long *) addr) #define BIT_ADDR "+m" (((volatile int *)addr)[nr >> 5]) #endif #define BASE_ADDR "m" (*(volatile int *)addr) /** * set_bit - Atomically set a bit in memory * @nr: the bit to set * @addr: the address to start counting from * * This function is atomic and may not be reordered. See __set_bit() * if you do not require the atomic guarantees. * * Note: there are no guarantees that this function will not be reordered * on non x86 architectures, so if you are writing portable code, * make sure not to rely on its reordering guarantees. * * Note that @nr may be almost arbitrarily large; this function is not * restricted to acting on a single-word quantity. */ static inline void set_bit(int nr, volatile void *addr) { asm volatile(LOCK_PREFIX "bts %1,%0" : ADDR : "Ir" (nr) : "memory"); } /** * __set_bit - Set a bit in memory * @nr: the bit to set * @addr: the address to start counting from * * Unlike set_bit(), this function is non-atomic and may be reordered. * If it's called on the same region of memory simultaneously, the effect * may be that only one operation succeeds. */ static inline void __set_bit(int nr, volatile void *addr) { asm volatile("bts %1,%0" : ADDR : "Ir" (nr) : "memory"); } /** * clear_bit - Clears a bit in memory * @nr: Bit to clear * @addr: Address to start counting from * * clear_bit() is atomic and may not be reordered. However, it does * not contain a memory barrier, so if it is used for locking purposes, * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() * in order to ensure changes are visible on other processors. */ static inline void clear_bit(int nr, volatile void *addr) { asm volatile(LOCK_PREFIX "btr %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR); } /* * clear_bit_unlock - Clears a bit in memory * @nr: Bit to clear * @addr: Address to start counting from * * clear_bit() is atomic and implies release semantics before the memory * operation. It can be used for an unlock. */ static inline void clear_bit_unlock(unsigned nr, volatile void *addr) { barrier(); clear_bit(nr, addr); } static inline void __clear_bit(int nr, volatile void *addr) { asm volatile("btr %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR); } /* * __clear_bit_unlock - Clears a bit in memory * @nr: Bit to clear * @addr: Address to start counting from * * __clear_bit() is non-atomic and implies release semantics before the memory * operation. It can be used for an unlock if no other CPUs can concurrently * modify other bits in the word. * * No memory barrier is required here, because x86 cannot reorder stores past * older loads. Same principle as spin_unlock. */ static inline void __clear_bit_unlock(unsigned nr, volatile void *addr) { barrier(); __clear_bit(nr, addr); } #define smp_mb__before_clear_bit() barrier() #define smp_mb__after_clear_bit() barrier() /** * __change_bit - Toggle a bit in memory * @nr: the bit to change * @addr: the address to start counting from * * Unlike change_bit(), this function is non-atomic and may be reordered. * If it's called on the same region of memory simultaneously, the effect * may be that only one operation succeeds. */ static inline void __change_bit(int nr, volatile void *addr) { asm volatile("btc %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR); } /** * change_bit - Toggle a bit in memory * @nr: Bit to change * @addr: Address to start counting from * * change_bit() is atomic and may not be reordered. * Note that @nr may be almost arbitrarily large; this function is not * restricted to acting on a single-word quantity. */ static inline void change_bit(int nr, volatile void *addr) { asm volatile(LOCK_PREFIX "btc %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR); } /** * test_and_set_bit - Set a bit and return its old value * @nr: Bit to set * @addr: Address to count from * * This operation is atomic and cannot be reordered. * It also implies a memory barrier. */ static inline int test_and_set_bit(int nr, volatile void *addr) { int oldbit; asm volatile(LOCK_PREFIX "bts %2,%1\n\t" "sbb %0,%0" : "=r" (oldbit), ADDR : "Ir" (nr) : "memory"); return oldbit; } /** * test_and_set_bit_lock - Set a bit and return its old value for lock * @nr: Bit to set * @addr: Address to count from * * This is the same as test_and_set_bit on x86. */ static inline int test_and_set_bit_lock(int nr, volatile void *addr) { return test_and_set_bit(nr, addr); } /** * __test_and_set_bit - Set a bit and return its old value * @nr: Bit to set * @addr: Address to count from * * This operation is non-atomic and can be reordered. * If two examples of this operation race, one can appear to succeed * but actually fail. You must protect multiple accesses with a lock. */ static inline int __test_and_set_bit(int nr, volatile void *addr) { int oldbit; asm volatile("bts %2,%3\n\t" "sbb %0,%0" : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR); return oldbit; } /** * test_and_clear_bit - Clear a bit and return its old value * @nr: Bit to clear * @addr: Address to count from * * This operation is atomic and cannot be reordered. * It also implies a memory barrier. */ static inline int test_and_clear_bit(int nr, volatile void *addr) { int oldbit; asm volatile(LOCK_PREFIX "btr %2,%1\n\t" "sbb %0,%0" : "=r" (oldbit), ADDR : "Ir" (nr) : "memory"); return oldbit; } /** * __test_and_clear_bit - Clear a bit and return its old value * @nr: Bit to clear * @addr: Address to count from * * This operation is non-atomic and can be reordered. * If two examples of this operation race, one can appear to succeed * but actually fail. You must protect multiple accesses with a lock. */ static inline int __test_and_clear_bit(int nr, volatile void *addr) { int oldbit; asm volatile("btr %2,%3\n\t" "sbb %0,%0" : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR); return oldbit; } /* WARNING: non atomic and it can be reordered! */ static inline int __test_and_change_bit(int nr, volatile void *addr) { int oldbit; asm volatile("btc %2,%3\n\t" "sbb %0,%0" : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR); return oldbit; } /** * test_and_change_bit - Change a bit and return its old value * @nr: Bit to change * @addr: Address to count from * * This operation is atomic and cannot be reordered. * It also implies a memory barrier. */ static inline int test_and_change_bit(int nr, volatile void *addr) { int oldbit; asm volatile(LOCK_PREFIX "btc %2,%1\n\t" "sbb %0,%0" : "=r" (oldbit), ADDR : "Ir" (nr) : "memory"); return oldbit; } static inline int constant_test_bit(int nr, const volatile void *addr) { return ((1UL << (nr % BITS_PER_LONG)) & (((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0; } static inline int variable_test_bit(int nr, volatile const void *addr) { int oldbit; asm volatile("bt %2,%3\n\t" "sbb %0,%0" : "=r" (oldbit) : "m" (((volatile const int *)addr)[nr >> 5]), "Ir" (nr), BASE_ADDR); return oldbit; } #if 0 /* Fool kernel-doc since it doesn't do macros yet */ /** * test_bit - Determine whether a bit is set * @nr: bit number to test * @addr: Address to start counting from */ static int test_bit(int nr, const volatile unsigned long *addr); #endif #define test_bit(nr,addr) \ (__builtin_constant_p(nr) ? \ constant_test_bit((nr),(addr)) : \ variable_test_bit((nr),(addr))) #undef BASE_ADDR #undef BIT_ADDR /** * __ffs - find first set bit in word * @word: The word to search * * Undefined if no bit exists, so code should check against 0 first. */ static inline unsigned long __ffs(unsigned long word) { __asm__("bsf %1,%0" :"=r" (word) :"rm" (word)); return word; } /** * ffz - find first zero bit in word * @word: The word to search * * Undefined if no zero exists, so code should check against ~0UL first. */ static inline unsigned long ffz(unsigned long word) { __asm__("bsf %1,%0" :"=r" (word) :"r" (~word)); return word; } /* * __fls: find last set bit in word * @word: The word to search * * Undefined if no zero exists, so code should check against ~0UL first. */ static inline unsigned long __fls(unsigned long word) { __asm__("bsr %1,%0" :"=r" (word) :"rm" (word)); return word; } #ifdef __KERNEL__ /** * ffs - find first set bit in word * @x: the word to search * * This is defined the same way as the libc and compiler builtin ffs * routines, therefore differs in spirit from the other bitops. * * ffs(value) returns 0 if value is 0 or the position of the first * set bit if value is nonzero. The first (least significant) bit * is at position 1. */ static inline int ffs(int x) { int r; #ifdef CONFIG_X86_CMOV __asm__("bsfl %1,%0\n\t" "cmovzl %2,%0" : "=r" (r) : "rm" (x), "r" (-1)); #else __asm__("bsfl %1,%0\n\t" "jnz 1f\n\t" "movl $-1,%0\n" "1:" : "=r" (r) : "rm" (x)); #endif return r + 1; } /** * fls - find last set bit in word * @x: the word to search * * This is defined in a similar way as the libc and compiler builtin * ffs, but returns the position of the most significant set bit. * * fls(value) returns 0 if value is 0 or the position of the last * set bit if value is nonzero. The last (most significant) bit is * at position 32. */ static inline int fls(int x) { int r; #ifdef CONFIG_X86_CMOV __asm__("bsrl %1,%0\n\t" "cmovzl %2,%0" : "=&r" (r) : "rm" (x), "rm" (-1)); #else __asm__("bsrl %1,%0\n\t" "jnz 1f\n\t" "movl $-1,%0\n" "1:" : "=r" (r) : "rm" (x)); #endif return r + 1; } #endif /* __KERNEL__ */ #undef ADDR static inline void set_bit_string(unsigned long *bitmap, unsigned long i, int len) { unsigned long end = i + len; while (i < end) { __set_bit(i, bitmap); i++; } } #ifdef __KERNEL__ #include #define ARCH_HAS_FAST_MULTIPLIER 1 #include #endif /* __KERNEL__ */ #include #ifdef __KERNEL__ #include #define ext2_set_bit_atomic(lock, nr, addr) \ test_and_set_bit((nr), (unsigned long *)(addr)) #define ext2_clear_bit_atomic(lock, nr, addr) \ test_and_clear_bit((nr), (unsigned long *)(addr)) #include #endif /* __KERNEL__ */ #endif /* _ASM_X86_BITOPS_H */