/* * * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup * * Copyright (C) 2009-2010 Martin Michlmayr * Copyright (C) 2008 Byron Bradley * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "common.h" #include "mpp.h" #include "tsx1x-common.h" #define QNAP_TS41X_JUMPER_JP1 45 static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = { I2C_BOARD_INFO("s35390a", 0x30), }; static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; static struct mv_sata_platform_data qnap_ts41x_sata_data = { .n_ports = 2, }; static struct gpio_keys_button qnap_ts41x_buttons[] = { { .code = KEY_COPY, .gpio = 43, .desc = "USB Copy", .active_low = 1, }, { .code = KEY_RESTART, .gpio = 37, .desc = "Reset", .active_low = 1, }, }; static struct gpio_keys_platform_data qnap_ts41x_button_data = { .buttons = qnap_ts41x_buttons, .nbuttons = ARRAY_SIZE(qnap_ts41x_buttons), }; static struct platform_device qnap_ts41x_button_device = { .name = "gpio-keys", .id = -1, .num_resources = 0, .dev = { .platform_data = &qnap_ts41x_button_data, } }; static unsigned int qnap_ts41x_mpp_config[] __initdata = { MPP0_SPI_SCn, MPP1_SPI_MOSI, MPP2_SPI_SCK, MPP3_SPI_MISO, MPP6_SYSRST_OUTn, MPP7_PEX_RST_OUTn, MPP8_TW_SDA, MPP9_TW_SCK, MPP10_UART0_TXD, MPP11_UART0_RXD, MPP13_UART1_TXD, /* PIC controller */ MPP14_UART1_RXD, /* PIC controller */ MPP15_SATA0_ACTn, MPP16_SATA1_ACTn, MPP20_GE1_0, MPP21_GE1_1, MPP22_GE1_2, MPP23_GE1_3, MPP24_GE1_4, MPP25_GE1_5, MPP26_GE1_6, MPP27_GE1_7, MPP30_GE1_10, MPP31_GE1_11, MPP32_GE1_12, MPP33_GE1_13, MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ MPP37_GPIO, /* Reset button */ MPP43_GPIO, /* USB Copy button */ MPP44_GPIO, /* Board ID: 0: TS-419U, 1: TS-419 */ MPP45_GPIO, /* JP1: 0: console, 1: LCD */ MPP46_GPIO, /* External SATA HDD1 error indicator */ MPP47_GPIO, /* External SATA HDD2 error indicator */ MPP48_GPIO, /* External SATA HDD3 error indicator */ MPP49_GPIO, /* External SATA HDD4 error indicator */ 0 }; static void __init qnap_ts41x_init(void) { /* * Basic setup. Needs to be called early. */ kirkwood_init(); kirkwood_mpp_conf(qnap_ts41x_mpp_config); kirkwood_uart0_init(); kirkwood_uart1_init(); /* A PIC controller is connected here. */ qnap_tsx1x_register_flash(); kirkwood_i2c_init(); i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1); kirkwood_ge00_init(&qnap_ts41x_ge00_data); kirkwood_ge01_init(&qnap_ts41x_ge01_data); kirkwood_sata_init(&qnap_ts41x_sata_data); kirkwood_ehci_init(); platform_device_register(&qnap_ts41x_button_device); pm_power_off = qnap_tsx1x_power_off; if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0) gpio_export(QNAP_TS41X_JUMPER_JP1, 0); } static int __init ts41x_pci_init(void) { if (machine_is_ts41x()) kirkwood_pcie_init(); return 0; } subsys_initcall(ts41x_pci_init); MACHINE_START(TS41X, "QNAP TS-41x") /* Maintainer: Martin Michlmayr */ .phys_io = KIRKWOOD_REGS_PHYS_BASE, .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = qnap_ts41x_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END