564 lines
15 KiB
C
564 lines
15 KiB
C
/*
|
|
* Driver for DEC VSXXX-AA mouse (hockey-puck mouse, ball or two rollers)
|
|
* DEC VSXXX-GA mouse (rectangular mouse, with ball)
|
|
* DEC VSXXX-AB tablet (digitizer with hair cross or stylus)
|
|
*
|
|
* Copyright (C) 2003-2004 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
|
|
*
|
|
* The packet format was initially taken from a patch to GPM which is (C) 2001
|
|
* by Karsten Merker <merker@linuxtag.org>
|
|
* and Maciej W. Rozycki <macro@ds2.pg.gda.pl>
|
|
* Later on, I had access to the device's documentation (referenced below).
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* Building an adaptor to DE9 / DB25 RS232
|
|
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
*
|
|
* DISCLAIMER: Use this description AT YOUR OWN RISK! I'll not pay for
|
|
* anything if you break your mouse, your computer or whatever!
|
|
*
|
|
* In theory, this mouse is a simple RS232 device. In practice, it has got
|
|
* a quite uncommon plug and the requirement to additionally get a power
|
|
* supply at +5V and -12V.
|
|
*
|
|
* If you look at the socket/jack (_not_ at the plug), we use this pin
|
|
* numbering:
|
|
* _______
|
|
* / 7 6 5 \
|
|
* | 4 --- 3 |
|
|
* \ 2 1 /
|
|
* -------
|
|
*
|
|
* DEC socket DE9 DB25 Note
|
|
* 1 (GND) 5 7 -
|
|
* 2 (RxD) 2 3 -
|
|
* 3 (TxD) 3 2 -
|
|
* 4 (-12V) - - Somewhere from the PSU. At ATX, it's
|
|
* the thin blue wire at pin 12 of the
|
|
* ATX power connector. Only required for
|
|
* VSXXX-AA/-GA mice.
|
|
* 5 (+5V) - - PSU (red wires of ATX power connector
|
|
* on pin 4, 6, 19 or 20) or HDD power
|
|
* connector (also red wire).
|
|
* 6 (+12V) - - HDD power connector, yellow wire. Only
|
|
* required for VSXXX-AB digitizer.
|
|
* 7 (dev. avail.) - - The mouse shorts this one to pin 1.
|
|
* This way, the host computer can detect
|
|
* the mouse. To use it with the adaptor,
|
|
* simply don't connect this pin.
|
|
*
|
|
* So to get a working adaptor, you need to connect the mouse with three
|
|
* wires to a RS232 port and two or three additional wires for +5V, +12V and
|
|
* -12V to the PSU.
|
|
*
|
|
* Flow specification for the link is 4800, 8o1.
|
|
*
|
|
* The mice and tablet are described in "VCB02 Video Subsystem - Technical
|
|
* Manual", DEC EK-104AA-TM-001. You'll find it at MANX, a search engine
|
|
* specific for DEC documentation. Try
|
|
* http://www.vt100.net/manx/details?pn=EK-104AA-TM-001;id=21;cp=1
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/input.h>
|
|
#include <linux/serio.h>
|
|
#include <linux/init.h>
|
|
|
|
#define DRIVER_DESC "Driver for DEC VSXXX-AA and -GA mice and VSXXX-AB tablet"
|
|
|
|
MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#undef VSXXXAA_DEBUG
|
|
#ifdef VSXXXAA_DEBUG
|
|
#define DBG(x...) printk(x)
|
|
#else
|
|
#define DBG(x...) do {} while (0)
|
|
#endif
|
|
|
|
#define VSXXXAA_INTRO_MASK 0x80
|
|
#define VSXXXAA_INTRO_HEAD 0x80
|
|
#define IS_HDR_BYTE(x) \
|
|
(((x) & VSXXXAA_INTRO_MASK) == VSXXXAA_INTRO_HEAD)
|
|
|
|
#define VSXXXAA_PACKET_MASK 0xe0
|
|
#define VSXXXAA_PACKET_REL 0x80
|
|
#define VSXXXAA_PACKET_ABS 0xc0
|
|
#define VSXXXAA_PACKET_POR 0xa0
|
|
#define MATCH_PACKET_TYPE(data, type) \
|
|
(((data) & VSXXXAA_PACKET_MASK) == (type))
|
|
|
|
|
|
|
|
struct vsxxxaa {
|
|
struct input_dev *dev;
|
|
struct serio *serio;
|
|
#define BUFLEN 15 /* At least 5 is needed for a full tablet packet */
|
|
unsigned char buf[BUFLEN];
|
|
unsigned char count;
|
|
unsigned char version;
|
|
unsigned char country;
|
|
unsigned char type;
|
|
char name[64];
|
|
char phys[32];
|
|
};
|
|
|
|
static void vsxxxaa_drop_bytes(struct vsxxxaa *mouse, int num)
|
|
{
|
|
if (num >= mouse->count) {
|
|
mouse->count = 0;
|
|
} else {
|
|
memmove(mouse->buf, mouse->buf + num - 1, BUFLEN - num);
|
|
mouse->count -= num;
|
|
}
|
|
}
|
|
|
|
static void vsxxxaa_queue_byte(struct vsxxxaa *mouse, unsigned char byte)
|
|
{
|
|
if (mouse->count == BUFLEN) {
|
|
printk(KERN_ERR "%s on %s: Dropping a byte of full buffer.\n",
|
|
mouse->name, mouse->phys);
|
|
vsxxxaa_drop_bytes(mouse, 1);
|
|
}
|
|
|
|
DBG(KERN_INFO "Queueing byte 0x%02x\n", byte);
|
|
|
|
mouse->buf[mouse->count++] = byte;
|
|
}
|
|
|
|
static void vsxxxaa_detection_done(struct vsxxxaa *mouse)
|
|
{
|
|
switch (mouse->type) {
|
|
case 0x02:
|
|
strlcpy(mouse->name, "DEC VSXXX-AA/-GA mouse",
|
|
sizeof(mouse->name));
|
|
break;
|
|
|
|
case 0x04:
|
|
strlcpy(mouse->name, "DEC VSXXX-AB digitizer",
|
|
sizeof(mouse->name));
|
|
break;
|
|
|
|
default:
|
|
snprintf(mouse->name, sizeof(mouse->name),
|
|
"unknown DEC pointer device (type = 0x%02x)",
|
|
mouse->type);
|
|
break;
|
|
}
|
|
|
|
printk(KERN_INFO
|
|
"Found %s version 0x%02x from country 0x%02x on port %s\n",
|
|
mouse->name, mouse->version, mouse->country, mouse->phys);
|
|
}
|
|
|
|
/*
|
|
* Returns number of bytes to be dropped, 0 if packet is okay.
|
|
*/
|
|
static int vsxxxaa_check_packet(struct vsxxxaa *mouse, int packet_len)
|
|
{
|
|
int i;
|
|
|
|
/* First byte must be a header byte */
|
|
if (!IS_HDR_BYTE(mouse->buf[0])) {
|
|
DBG("vsck: len=%d, 1st=0x%02x\n", packet_len, mouse->buf[0]);
|
|
return 1;
|
|
}
|
|
|
|
/* Check all following bytes */
|
|
for (i = 1; i < packet_len; i++) {
|
|
if (IS_HDR_BYTE(mouse->buf[i])) {
|
|
printk(KERN_ERR
|
|
"Need to drop %d bytes of a broken packet.\n",
|
|
i - 1);
|
|
DBG(KERN_INFO "check: len=%d, b[%d]=0x%02x\n",
|
|
packet_len, i, mouse->buf[i]);
|
|
return i - 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int vsxxxaa_smells_like_packet(struct vsxxxaa *mouse,
|
|
unsigned char type, size_t len)
|
|
{
|
|
return mouse->count >= len && MATCH_PACKET_TYPE(mouse->buf[0], type);
|
|
}
|
|
|
|
static void vsxxxaa_handle_REL_packet(struct vsxxxaa *mouse)
|
|
{
|
|
struct input_dev *dev = mouse->dev;
|
|
unsigned char *buf = mouse->buf;
|
|
int left, middle, right;
|
|
int dx, dy;
|
|
|
|
/*
|
|
* Check for normal stream packets. This is three bytes,
|
|
* with the first byte's 3 MSB set to 100.
|
|
*
|
|
* [0]: 1 0 0 SignX SignY Left Middle Right
|
|
* [1]: 0 dx dx dx dx dx dx dx
|
|
* [2]: 0 dy dy dy dy dy dy dy
|
|
*/
|
|
|
|
/*
|
|
* Low 7 bit of byte 1 are abs(dx), bit 7 is
|
|
* 0, bit 4 of byte 0 is direction.
|
|
*/
|
|
dx = buf[1] & 0x7f;
|
|
dx *= ((buf[0] >> 4) & 0x01) ? 1 : -1;
|
|
|
|
/*
|
|
* Low 7 bit of byte 2 are abs(dy), bit 7 is
|
|
* 0, bit 3 of byte 0 is direction.
|
|
*/
|
|
dy = buf[2] & 0x7f;
|
|
dy *= ((buf[0] >> 3) & 0x01) ? -1 : 1;
|
|
|
|
/*
|
|
* Get button state. It's the low three bits
|
|
* (for three buttons) of byte 0.
|
|
*/
|
|
left = buf[0] & 0x04;
|
|
middle = buf[0] & 0x02;
|
|
right = buf[0] & 0x01;
|
|
|
|
vsxxxaa_drop_bytes(mouse, 3);
|
|
|
|
DBG(KERN_INFO "%s on %s: dx=%d, dy=%d, buttons=%s%s%s\n",
|
|
mouse->name, mouse->phys, dx, dy,
|
|
left ? "L" : "l", middle ? "M" : "m", right ? "R" : "r");
|
|
|
|
/*
|
|
* Report what we've found so far...
|
|
*/
|
|
input_report_key(dev, BTN_LEFT, left);
|
|
input_report_key(dev, BTN_MIDDLE, middle);
|
|
input_report_key(dev, BTN_RIGHT, right);
|
|
input_report_key(dev, BTN_TOUCH, 0);
|
|
input_report_rel(dev, REL_X, dx);
|
|
input_report_rel(dev, REL_Y, dy);
|
|
input_sync(dev);
|
|
}
|
|
|
|
static void vsxxxaa_handle_ABS_packet(struct vsxxxaa *mouse)
|
|
{
|
|
struct input_dev *dev = mouse->dev;
|
|
unsigned char *buf = mouse->buf;
|
|
int left, middle, right, touch;
|
|
int x, y;
|
|
|
|
/*
|
|
* Tablet position / button packet
|
|
*
|
|
* [0]: 1 1 0 B4 B3 B2 B1 Pr
|
|
* [1]: 0 0 X5 X4 X3 X2 X1 X0
|
|
* [2]: 0 0 X11 X10 X9 X8 X7 X6
|
|
* [3]: 0 0 Y5 Y4 Y3 Y2 Y1 Y0
|
|
* [4]: 0 0 Y11 Y10 Y9 Y8 Y7 Y6
|
|
*/
|
|
|
|
/*
|
|
* Get X/Y position. Y axis needs to be inverted since VSXXX-AB
|
|
* counts down->top while monitor counts top->bottom.
|
|
*/
|
|
x = ((buf[2] & 0x3f) << 6) | (buf[1] & 0x3f);
|
|
y = ((buf[4] & 0x3f) << 6) | (buf[3] & 0x3f);
|
|
y = 1023 - y;
|
|
|
|
/*
|
|
* Get button state. It's bits <4..1> of byte 0.
|
|
*/
|
|
left = buf[0] & 0x02;
|
|
middle = buf[0] & 0x04;
|
|
right = buf[0] & 0x08;
|
|
touch = buf[0] & 0x10;
|
|
|
|
vsxxxaa_drop_bytes(mouse, 5);
|
|
|
|
DBG(KERN_INFO "%s on %s: x=%d, y=%d, buttons=%s%s%s%s\n",
|
|
mouse->name, mouse->phys, x, y,
|
|
left ? "L" : "l", middle ? "M" : "m",
|
|
right ? "R" : "r", touch ? "T" : "t");
|
|
|
|
/*
|
|
* Report what we've found so far...
|
|
*/
|
|
input_report_key(dev, BTN_LEFT, left);
|
|
input_report_key(dev, BTN_MIDDLE, middle);
|
|
input_report_key(dev, BTN_RIGHT, right);
|
|
input_report_key(dev, BTN_TOUCH, touch);
|
|
input_report_abs(dev, ABS_X, x);
|
|
input_report_abs(dev, ABS_Y, y);
|
|
input_sync(dev);
|
|
}
|
|
|
|
static void vsxxxaa_handle_POR_packet(struct vsxxxaa *mouse)
|
|
{
|
|
struct input_dev *dev = mouse->dev;
|
|
unsigned char *buf = mouse->buf;
|
|
int left, middle, right;
|
|
unsigned char error;
|
|
|
|
/*
|
|
* Check for Power-On-Reset packets. These are sent out
|
|
* after plugging the mouse in, or when explicitly
|
|
* requested by sending 'T'.
|
|
*
|
|
* [0]: 1 0 1 0 R3 R2 R1 R0
|
|
* [1]: 0 M2 M1 M0 D3 D2 D1 D0
|
|
* [2]: 0 E6 E5 E4 E3 E2 E1 E0
|
|
* [3]: 0 0 0 0 0 Left Middle Right
|
|
*
|
|
* M: manufacturer location code
|
|
* R: revision code
|
|
* E: Error code. If it's in the range of 0x00..0x1f, only some
|
|
* minor problem occurred. Errors >= 0x20 are considered bad
|
|
* and the device may not work properly...
|
|
* D: <0010> == mouse, <0100> == tablet
|
|
*/
|
|
|
|
mouse->version = buf[0] & 0x0f;
|
|
mouse->country = (buf[1] >> 4) & 0x07;
|
|
mouse->type = buf[1] & 0x0f;
|
|
error = buf[2] & 0x7f;
|
|
|
|
/*
|
|
* Get button state. It's the low three bits
|
|
* (for three buttons) of byte 0. Maybe even the bit <3>
|
|
* has some meaning if a tablet is attached.
|
|
*/
|
|
left = buf[0] & 0x04;
|
|
middle = buf[0] & 0x02;
|
|
right = buf[0] & 0x01;
|
|
|
|
vsxxxaa_drop_bytes(mouse, 4);
|
|
vsxxxaa_detection_done(mouse);
|
|
|
|
if (error <= 0x1f) {
|
|
/* No (serious) error. Report buttons */
|
|
input_report_key(dev, BTN_LEFT, left);
|
|
input_report_key(dev, BTN_MIDDLE, middle);
|
|
input_report_key(dev, BTN_RIGHT, right);
|
|
input_report_key(dev, BTN_TOUCH, 0);
|
|
input_sync(dev);
|
|
|
|
if (error != 0)
|
|
printk(KERN_INFO "Your %s on %s reports error=0x%02x\n",
|
|
mouse->name, mouse->phys, error);
|
|
|
|
}
|
|
|
|
/*
|
|
* If the mouse was hot-plugged, we need to force differential mode
|
|
* now... However, give it a second to recover from it's reset.
|
|
*/
|
|
printk(KERN_NOTICE
|
|
"%s on %s: Forcing standard packet format, "
|
|
"incremental streaming mode and 72 samples/sec\n",
|
|
mouse->name, mouse->phys);
|
|
serio_write(mouse->serio, 'S'); /* Standard format */
|
|
mdelay(50);
|
|
serio_write(mouse->serio, 'R'); /* Incremental */
|
|
mdelay(50);
|
|
serio_write(mouse->serio, 'L'); /* 72 samples/sec */
|
|
}
|
|
|
|
static void vsxxxaa_parse_buffer(struct vsxxxaa *mouse)
|
|
{
|
|
unsigned char *buf = mouse->buf;
|
|
int stray_bytes;
|
|
|
|
/*
|
|
* Parse buffer to death...
|
|
*/
|
|
do {
|
|
/*
|
|
* Out of sync? Throw away what we don't understand. Each
|
|
* packet starts with a byte whose bit 7 is set. Unhandled
|
|
* packets (ie. which we don't know about or simply b0rk3d
|
|
* data...) will get shifted out of the buffer after some
|
|
* activity on the mouse.
|
|
*/
|
|
while (mouse->count > 0 && !IS_HDR_BYTE(buf[0])) {
|
|
printk(KERN_ERR "%s on %s: Dropping a byte to regain "
|
|
"sync with mouse data stream...\n",
|
|
mouse->name, mouse->phys);
|
|
vsxxxaa_drop_bytes(mouse, 1);
|
|
}
|
|
|
|
/*
|
|
* Check for packets we know about.
|
|
*/
|
|
|
|
if (vsxxxaa_smells_like_packet(mouse, VSXXXAA_PACKET_REL, 3)) {
|
|
/* Check for broken packet */
|
|
stray_bytes = vsxxxaa_check_packet(mouse, 3);
|
|
if (!stray_bytes)
|
|
vsxxxaa_handle_REL_packet(mouse);
|
|
|
|
} else if (vsxxxaa_smells_like_packet(mouse,
|
|
VSXXXAA_PACKET_ABS, 5)) {
|
|
/* Check for broken packet */
|
|
stray_bytes = vsxxxaa_check_packet(mouse, 5);
|
|
if (!stray_bytes)
|
|
vsxxxaa_handle_ABS_packet(mouse);
|
|
|
|
} else if (vsxxxaa_smells_like_packet(mouse,
|
|
VSXXXAA_PACKET_POR, 4)) {
|
|
/* Check for broken packet */
|
|
stray_bytes = vsxxxaa_check_packet(mouse, 4);
|
|
if (!stray_bytes)
|
|
vsxxxaa_handle_POR_packet(mouse);
|
|
|
|
} else {
|
|
break; /* No REL, ABS or POR packet found */
|
|
}
|
|
|
|
if (stray_bytes > 0) {
|
|
printk(KERN_ERR "Dropping %d bytes now...\n",
|
|
stray_bytes);
|
|
vsxxxaa_drop_bytes(mouse, stray_bytes);
|
|
}
|
|
|
|
} while (1);
|
|
}
|
|
|
|
static irqreturn_t vsxxxaa_interrupt(struct serio *serio,
|
|
unsigned char data, unsigned int flags)
|
|
{
|
|
struct vsxxxaa *mouse = serio_get_drvdata(serio);
|
|
|
|
vsxxxaa_queue_byte(mouse, data);
|
|
vsxxxaa_parse_buffer(mouse);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void vsxxxaa_disconnect(struct serio *serio)
|
|
{
|
|
struct vsxxxaa *mouse = serio_get_drvdata(serio);
|
|
|
|
serio_close(serio);
|
|
serio_set_drvdata(serio, NULL);
|
|
input_unregister_device(mouse->dev);
|
|
kfree(mouse);
|
|
}
|
|
|
|
static int vsxxxaa_connect(struct serio *serio, struct serio_driver *drv)
|
|
{
|
|
struct vsxxxaa *mouse;
|
|
struct input_dev *input_dev;
|
|
int err = -ENOMEM;
|
|
|
|
mouse = kzalloc(sizeof(struct vsxxxaa), GFP_KERNEL);
|
|
input_dev = input_allocate_device();
|
|
if (!mouse || !input_dev)
|
|
goto fail1;
|
|
|
|
mouse->dev = input_dev;
|
|
mouse->serio = serio;
|
|
strlcat(mouse->name, "DEC VSXXX-AA/-GA mouse or VSXXX-AB digitizer",
|
|
sizeof(mouse->name));
|
|
snprintf(mouse->phys, sizeof(mouse->phys), "%s/input0", serio->phys);
|
|
|
|
input_dev->name = mouse->name;
|
|
input_dev->phys = mouse->phys;
|
|
input_dev->id.bustype = BUS_RS232;
|
|
input_dev->dev.parent = &serio->dev;
|
|
|
|
__set_bit(EV_KEY, input_dev->evbit); /* We have buttons */
|
|
__set_bit(EV_REL, input_dev->evbit);
|
|
__set_bit(EV_ABS, input_dev->evbit);
|
|
__set_bit(BTN_LEFT, input_dev->keybit); /* We have 3 buttons */
|
|
__set_bit(BTN_MIDDLE, input_dev->keybit);
|
|
__set_bit(BTN_RIGHT, input_dev->keybit);
|
|
__set_bit(BTN_TOUCH, input_dev->keybit); /* ...and Tablet */
|
|
__set_bit(REL_X, input_dev->relbit);
|
|
__set_bit(REL_Y, input_dev->relbit);
|
|
input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0);
|
|
|
|
serio_set_drvdata(serio, mouse);
|
|
|
|
err = serio_open(serio, drv);
|
|
if (err)
|
|
goto fail2;
|
|
|
|
/*
|
|
* Request selftest. Standard packet format and differential
|
|
* mode will be requested after the device ID'ed successfully.
|
|
*/
|
|
serio_write(serio, 'T'); /* Test */
|
|
|
|
err = input_register_device(input_dev);
|
|
if (err)
|
|
goto fail3;
|
|
|
|
return 0;
|
|
|
|
fail3: serio_close(serio);
|
|
fail2: serio_set_drvdata(serio, NULL);
|
|
fail1: input_free_device(input_dev);
|
|
kfree(mouse);
|
|
return err;
|
|
}
|
|
|
|
static struct serio_device_id vsxxaa_serio_ids[] = {
|
|
{
|
|
.type = SERIO_RS232,
|
|
.proto = SERIO_VSXXXAA,
|
|
.id = SERIO_ANY,
|
|
.extra = SERIO_ANY,
|
|
},
|
|
{ 0 }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(serio, vsxxaa_serio_ids);
|
|
|
|
static struct serio_driver vsxxxaa_drv = {
|
|
.driver = {
|
|
.name = "vsxxxaa",
|
|
},
|
|
.description = DRIVER_DESC,
|
|
.id_table = vsxxaa_serio_ids,
|
|
.connect = vsxxxaa_connect,
|
|
.interrupt = vsxxxaa_interrupt,
|
|
.disconnect = vsxxxaa_disconnect,
|
|
};
|
|
|
|
static int __init vsxxxaa_init(void)
|
|
{
|
|
return serio_register_driver(&vsxxxaa_drv);
|
|
}
|
|
|
|
static void __exit vsxxxaa_exit(void)
|
|
{
|
|
serio_unregister_driver(&vsxxxaa_drv);
|
|
}
|
|
|
|
module_init(vsxxxaa_init);
|
|
module_exit(vsxxxaa_exit);
|
|
|