446 lines
13 KiB
C
446 lines
13 KiB
C
/*
|
||
Common Flash Interface probe code.
|
||
(C) 2000 Red Hat. GPL'd.
|
||
$Id: cfi_probe.c,v 1.84 2005/11/07 11:14:23 gleixner Exp $
|
||
*/
|
||
|
||
#include <linux/config.h>
|
||
#include <linux/module.h>
|
||
#include <linux/types.h>
|
||
#include <linux/kernel.h>
|
||
#include <linux/init.h>
|
||
#include <asm/io.h>
|
||
#include <asm/byteorder.h>
|
||
#include <linux/errno.h>
|
||
#include <linux/slab.h>
|
||
#include <linux/interrupt.h>
|
||
|
||
#include <linux/mtd/xip.h>
|
||
#include <linux/mtd/map.h>
|
||
#include <linux/mtd/cfi.h>
|
||
#include <linux/mtd/gen_probe.h>
|
||
|
||
//#define DEBUG_CFI
|
||
|
||
#ifdef DEBUG_CFI
|
||
static void print_cfi_ident(struct cfi_ident *);
|
||
#endif
|
||
|
||
static int cfi_probe_chip(struct map_info *map, __u32 base,
|
||
unsigned long *chip_map, struct cfi_private *cfi);
|
||
static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi);
|
||
|
||
struct mtd_info *cfi_probe(struct map_info *map);
|
||
|
||
#ifdef CONFIG_MTD_XIP
|
||
|
||
/* only needed for short periods, so this is rather simple */
|
||
#define xip_disable() local_irq_disable()
|
||
|
||
#define xip_allowed(base, map) \
|
||
do { \
|
||
(void) map_read(map, base); \
|
||
asm volatile (".rep 8; nop; .endr"); \
|
||
local_irq_enable(); \
|
||
} while (0)
|
||
|
||
#define xip_enable(base, map, cfi) \
|
||
do { \
|
||
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
|
||
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
|
||
xip_allowed(base, map); \
|
||
} while (0)
|
||
|
||
#define xip_disable_qry(base, map, cfi) \
|
||
do { \
|
||
xip_disable(); \
|
||
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
|
||
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
|
||
cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); \
|
||
} while (0)
|
||
|
||
#else
|
||
|
||
#define xip_disable() do { } while (0)
|
||
#define xip_allowed(base, map) do { } while (0)
|
||
#define xip_enable(base, map, cfi) do { } while (0)
|
||
#define xip_disable_qry(base, map, cfi) do { } while (0)
|
||
|
||
#endif
|
||
|
||
/* check for QRY.
|
||
in: interleave,type,mode
|
||
ret: table index, <0 for error
|
||
*/
|
||
static int __xipram qry_present(struct map_info *map, __u32 base,
|
||
struct cfi_private *cfi)
|
||
{
|
||
int osf = cfi->interleave * cfi->device_type; // scale factor
|
||
map_word val[3];
|
||
map_word qry[3];
|
||
|
||
qry[0] = cfi_build_cmd('Q', map, cfi);
|
||
qry[1] = cfi_build_cmd('R', map, cfi);
|
||
qry[2] = cfi_build_cmd('Y', map, cfi);
|
||
|
||
val[0] = map_read(map, base + osf*0x10);
|
||
val[1] = map_read(map, base + osf*0x11);
|
||
val[2] = map_read(map, base + osf*0x12);
|
||
|
||
if (!map_word_equal(map, qry[0], val[0]))
|
||
return 0;
|
||
|
||
if (!map_word_equal(map, qry[1], val[1]))
|
||
return 0;
|
||
|
||
if (!map_word_equal(map, qry[2], val[2]))
|
||
return 0;
|
||
|
||
return 1; // "QRY" found
|
||
}
|
||
|
||
static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
|
||
unsigned long *chip_map, struct cfi_private *cfi)
|
||
{
|
||
int i;
|
||
|
||
if ((base + 0) >= map->size) {
|
||
printk(KERN_NOTICE
|
||
"Probe at base[0x00](0x%08lx) past the end of the map(0x%08lx)\n",
|
||
(unsigned long)base, map->size -1);
|
||
return 0;
|
||
}
|
||
if ((base + 0xff) >= map->size) {
|
||
printk(KERN_NOTICE
|
||
"Probe at base[0x55](0x%08lx) past the end of the map(0x%08lx)\n",
|
||
(unsigned long)base + 0x55, map->size -1);
|
||
return 0;
|
||
}
|
||
|
||
xip_disable();
|
||
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
|
||
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
|
||
cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
|
||
|
||
if (!qry_present(map,base,cfi)) {
|
||
xip_enable(base, map, cfi);
|
||
return 0;
|
||
}
|
||
|
||
if (!cfi->numchips) {
|
||
/* This is the first time we're called. Set up the CFI
|
||
stuff accordingly and return */
|
||
return cfi_chip_setup(map, cfi);
|
||
}
|
||
|
||
/* Check each previous chip to see if it's an alias */
|
||
for (i=0; i < (base >> cfi->chipshift); i++) {
|
||
unsigned long start;
|
||
if(!test_bit(i, chip_map)) {
|
||
/* Skip location; no valid chip at this address */
|
||
continue;
|
||
}
|
||
start = i << cfi->chipshift;
|
||
/* This chip should be in read mode if it's one
|
||
we've already touched. */
|
||
if (qry_present(map, start, cfi)) {
|
||
/* Eep. This chip also had the QRY marker.
|
||
* Is it an alias for the new one? */
|
||
cfi_send_gen_cmd(0xF0, 0, start, map, cfi, cfi->device_type, NULL);
|
||
cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
|
||
|
||
/* If the QRY marker goes away, it's an alias */
|
||
if (!qry_present(map, start, cfi)) {
|
||
xip_allowed(base, map);
|
||
printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
|
||
map->name, base, start);
|
||
return 0;
|
||
}
|
||
/* Yes, it's actually got QRY for data. Most
|
||
* unfortunate. Stick the new chip in read mode
|
||
* too and if it's the same, assume it's an alias. */
|
||
/* FIXME: Use other modes to do a proper check */
|
||
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
|
||
cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
|
||
|
||
if (qry_present(map, base, cfi)) {
|
||
xip_allowed(base, map);
|
||
printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
|
||
map->name, base, start);
|
||
return 0;
|
||
}
|
||
}
|
||
}
|
||
|
||
/* OK, if we got to here, then none of the previous chips appear to
|
||
be aliases for the current one. */
|
||
set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */
|
||
cfi->numchips++;
|
||
|
||
/* Put it back into Read Mode */
|
||
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
|
||
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
|
||
xip_allowed(base, map);
|
||
|
||
printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
|
||
map->name, cfi->interleave, cfi->device_type*8, base,
|
||
map->bankwidth*8);
|
||
|
||
return 1;
|
||
}
|
||
|
||
static int __xipram cfi_chip_setup(struct map_info *map,
|
||
struct cfi_private *cfi)
|
||
{
|
||
int ofs_factor = cfi->interleave*cfi->device_type;
|
||
__u32 base = 0;
|
||
int num_erase_regions = cfi_read_query(map, base + (0x10 + 28)*ofs_factor);
|
||
int i;
|
||
|
||
xip_enable(base, map, cfi);
|
||
#ifdef DEBUG_CFI
|
||
printk("Number of erase regions: %d\n", num_erase_regions);
|
||
#endif
|
||
if (!num_erase_regions)
|
||
return 0;
|
||
|
||
cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
|
||
if (!cfi->cfiq) {
|
||
printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
|
||
return 0;
|
||
}
|
||
|
||
memset(cfi->cfiq,0,sizeof(struct cfi_ident));
|
||
|
||
cfi->cfi_mode = CFI_MODE_CFI;
|
||
|
||
/* Read the CFI info structure */
|
||
xip_disable_qry(base, map, cfi);
|
||
for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++)
|
||
((unsigned char *)cfi->cfiq)[i] = cfi_read_query(map,base + (0x10 + i)*ofs_factor);
|
||
|
||
/* Note we put the device back into Read Mode BEFORE going into Auto
|
||
* Select Mode, as some devices support nesting of modes, others
|
||
* don't. This way should always work.
|
||
* On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and
|
||
* so should be treated as nops or illegal (and so put the device
|
||
* back into Read Mode, which is a nop in this case).
|
||
*/
|
||
cfi_send_gen_cmd(0xf0, 0, base, map, cfi, cfi->device_type, NULL);
|
||
cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL);
|
||
cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL);
|
||
cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL);
|
||
cfi->mfr = cfi_read_query(map, base);
|
||
cfi->id = cfi_read_query(map, base + ofs_factor);
|
||
|
||
/* Put it back into Read Mode */
|
||
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
|
||
/* ... even if it's an Intel chip */
|
||
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
|
||
xip_allowed(base, map);
|
||
|
||
/* Do any necessary byteswapping */
|
||
cfi->cfiq->P_ID = le16_to_cpu(cfi->cfiq->P_ID);
|
||
|
||
cfi->cfiq->P_ADR = le16_to_cpu(cfi->cfiq->P_ADR);
|
||
cfi->cfiq->A_ID = le16_to_cpu(cfi->cfiq->A_ID);
|
||
cfi->cfiq->A_ADR = le16_to_cpu(cfi->cfiq->A_ADR);
|
||
cfi->cfiq->InterfaceDesc = le16_to_cpu(cfi->cfiq->InterfaceDesc);
|
||
cfi->cfiq->MaxBufWriteSize = le16_to_cpu(cfi->cfiq->MaxBufWriteSize);
|
||
|
||
#ifdef DEBUG_CFI
|
||
/* Dump the information therein */
|
||
print_cfi_ident(cfi->cfiq);
|
||
#endif
|
||
|
||
for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
|
||
cfi->cfiq->EraseRegionInfo[i] = le32_to_cpu(cfi->cfiq->EraseRegionInfo[i]);
|
||
|
||
#ifdef DEBUG_CFI
|
||
printk(" Erase Region #%d: BlockSize 0x%4.4X bytes, %d blocks\n",
|
||
i, (cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff,
|
||
(cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1);
|
||
#endif
|
||
}
|
||
|
||
printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
|
||
map->name, cfi->interleave, cfi->device_type*8, base,
|
||
map->bankwidth*8);
|
||
|
||
return 1;
|
||
}
|
||
|
||
#ifdef DEBUG_CFI
|
||
static char *vendorname(__u16 vendor)
|
||
{
|
||
switch (vendor) {
|
||
case P_ID_NONE:
|
||
return "None";
|
||
|
||
case P_ID_INTEL_EXT:
|
||
return "Intel/Sharp Extended";
|
||
|
||
case P_ID_AMD_STD:
|
||
return "AMD/Fujitsu Standard";
|
||
|
||
case P_ID_INTEL_STD:
|
||
return "Intel/Sharp Standard";
|
||
|
||
case P_ID_AMD_EXT:
|
||
return "AMD/Fujitsu Extended";
|
||
|
||
case P_ID_WINBOND:
|
||
return "Winbond Standard";
|
||
|
||
case P_ID_ST_ADV:
|
||
return "ST Advanced";
|
||
|
||
case P_ID_MITSUBISHI_STD:
|
||
return "Mitsubishi Standard";
|
||
|
||
case P_ID_MITSUBISHI_EXT:
|
||
return "Mitsubishi Extended";
|
||
|
||
case P_ID_SST_PAGE:
|
||
return "SST Page Write";
|
||
|
||
case P_ID_INTEL_PERFORMANCE:
|
||
return "Intel Performance Code";
|
||
|
||
case P_ID_INTEL_DATA:
|
||
return "Intel Data";
|
||
|
||
case P_ID_RESERVED:
|
||
return "Not Allowed / Reserved for Future Use";
|
||
|
||
default:
|
||
return "Unknown";
|
||
}
|
||
}
|
||
|
||
|
||
static void print_cfi_ident(struct cfi_ident *cfip)
|
||
{
|
||
#if 0
|
||
if (cfip->qry[0] != 'Q' || cfip->qry[1] != 'R' || cfip->qry[2] != 'Y') {
|
||
printk("Invalid CFI ident structure.\n");
|
||
return;
|
||
}
|
||
#endif
|
||
printk("Primary Vendor Command Set: %4.4X (%s)\n", cfip->P_ID, vendorname(cfip->P_ID));
|
||
if (cfip->P_ADR)
|
||
printk("Primary Algorithm Table at %4.4X\n", cfip->P_ADR);
|
||
else
|
||
printk("No Primary Algorithm Table\n");
|
||
|
||
printk("Alternative Vendor Command Set: %4.4X (%s)\n", cfip->A_ID, vendorname(cfip->A_ID));
|
||
if (cfip->A_ADR)
|
||
printk("Alternate Algorithm Table at %4.4X\n", cfip->A_ADR);
|
||
else
|
||
printk("No Alternate Algorithm Table\n");
|
||
|
||
|
||
printk("Vcc Minimum: %2d.%d V\n", cfip->VccMin >> 4, cfip->VccMin & 0xf);
|
||
printk("Vcc Maximum: %2d.%d V\n", cfip->VccMax >> 4, cfip->VccMax & 0xf);
|
||
if (cfip->VppMin) {
|
||
printk("Vpp Minimum: %2d.%d V\n", cfip->VppMin >> 4, cfip->VppMin & 0xf);
|
||
printk("Vpp Maximum: %2d.%d V\n", cfip->VppMax >> 4, cfip->VppMax & 0xf);
|
||
}
|
||
else
|
||
printk("No Vpp line\n");
|
||
|
||
printk("Typical byte/word write timeout: %d <20>s\n", 1<<cfip->WordWriteTimeoutTyp);
|
||
printk("Maximum byte/word write timeout: %d <20>s\n", (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp));
|
||
|
||
if (cfip->BufWriteTimeoutTyp || cfip->BufWriteTimeoutMax) {
|
||
printk("Typical full buffer write timeout: %d <20>s\n", 1<<cfip->BufWriteTimeoutTyp);
|
||
printk("Maximum full buffer write timeout: %d <20>s\n", (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp));
|
||
}
|
||
else
|
||
printk("Full buffer write not supported\n");
|
||
|
||
printk("Typical block erase timeout: %d ms\n", 1<<cfip->BlockEraseTimeoutTyp);
|
||
printk("Maximum block erase timeout: %d ms\n", (1<<cfip->BlockEraseTimeoutMax) * (1<<cfip->BlockEraseTimeoutTyp));
|
||
if (cfip->ChipEraseTimeoutTyp || cfip->ChipEraseTimeoutMax) {
|
||
printk("Typical chip erase timeout: %d ms\n", 1<<cfip->ChipEraseTimeoutTyp);
|
||
printk("Maximum chip erase timeout: %d ms\n", (1<<cfip->ChipEraseTimeoutMax) * (1<<cfip->ChipEraseTimeoutTyp));
|
||
}
|
||
else
|
||
printk("Chip erase not supported\n");
|
||
|
||
printk("Device size: 0x%X bytes (%d MiB)\n", 1 << cfip->DevSize, 1<< (cfip->DevSize - 20));
|
||
printk("Flash Device Interface description: 0x%4.4X\n", cfip->InterfaceDesc);
|
||
switch(cfip->InterfaceDesc) {
|
||
case 0:
|
||
printk(" - x8-only asynchronous interface\n");
|
||
break;
|
||
|
||
case 1:
|
||
printk(" - x16-only asynchronous interface\n");
|
||
break;
|
||
|
||
case 2:
|
||
printk(" - supports x8 and x16 via BYTE# with asynchronous interface\n");
|
||
break;
|
||
|
||
case 3:
|
||
printk(" - x32-only asynchronous interface\n");
|
||
break;
|
||
|
||
case 4:
|
||
printk(" - supports x16 and x32 via Word# with asynchronous interface\n");
|
||
break;
|
||
|
||
case 65535:
|
||
printk(" - Not Allowed / Reserved\n");
|
||
break;
|
||
|
||
default:
|
||
printk(" - Unknown\n");
|
||
break;
|
||
}
|
||
|
||
printk("Max. bytes in buffer write: 0x%x\n", 1<< cfip->MaxBufWriteSize);
|
||
printk("Number of Erase Block Regions: %d\n", cfip->NumEraseRegions);
|
||
|
||
}
|
||
#endif /* DEBUG_CFI */
|
||
|
||
static struct chip_probe cfi_chip_probe = {
|
||
.name = "CFI",
|
||
.probe_chip = cfi_probe_chip
|
||
};
|
||
|
||
struct mtd_info *cfi_probe(struct map_info *map)
|
||
{
|
||
/*
|
||
* Just use the generic probe stuff to call our CFI-specific
|
||
* chip_probe routine in all the possible permutations, etc.
|
||
*/
|
||
return mtd_do_chip_probe(map, &cfi_chip_probe);
|
||
}
|
||
|
||
static struct mtd_chip_driver cfi_chipdrv = {
|
||
.probe = cfi_probe,
|
||
.name = "cfi_probe",
|
||
.module = THIS_MODULE
|
||
};
|
||
|
||
int __init cfi_probe_init(void)
|
||
{
|
||
register_mtd_chip_driver(&cfi_chipdrv);
|
||
return 0;
|
||
}
|
||
|
||
static void __exit cfi_probe_exit(void)
|
||
{
|
||
unregister_mtd_chip_driver(&cfi_chipdrv);
|
||
}
|
||
|
||
module_init(cfi_probe_init);
|
||
module_exit(cfi_probe_exit);
|
||
|
||
MODULE_LICENSE("GPL");
|
||
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
|
||
MODULE_DESCRIPTION("Probe code for CFI-compliant flash chips");
|