110 lines
3.6 KiB
Plaintext
110 lines
3.6 KiB
Plaintext
MediaTek XS-PHY binding
|
|
--------------------------
|
|
|
|
The XS-PHY controller supports physical layer functionality for USB3.1
|
|
GEN2 controller on MediaTek SoCs.
|
|
|
|
Required properties (controller (parent) node):
|
|
- compatible : should be "mediatek,<soc-model>-xsphy", "mediatek,xsphy",
|
|
soc-model is the name of SoC, such as mt3611 etc;
|
|
when using "mediatek,xsphy" compatible string, you need SoC specific
|
|
ones in addition, one of:
|
|
- "mediatek,mt3611-xsphy"
|
|
|
|
- #address-cells, #size-cells : should use the same values as the root node
|
|
- ranges: must be present
|
|
|
|
Optional properties (controller (parent) node):
|
|
- reg : offset and length of register shared by multiple U3 ports,
|
|
exclude port's private register, if only U2 ports provided,
|
|
shouldn't use the property.
|
|
- mediatek,src-ref-clk-mhz : u32, frequency of reference clock for slew rate
|
|
calibrate
|
|
- mediatek,src-coef : u32, coefficient for slew rate calibrate, depends on
|
|
SoC process
|
|
|
|
Required nodes : a sub-node is required for each port the controller
|
|
provides. Address range information including the usual
|
|
'reg' property is used inside these nodes to describe
|
|
the controller's topology.
|
|
|
|
Required properties (port (child) node):
|
|
- reg : address and length of the register set for the port.
|
|
- clocks : a list of phandle + clock-specifier pairs, one for each
|
|
entry in clock-names
|
|
- clock-names : must contain
|
|
"ref": 48M reference clock for HighSpeed analog phy; and 26M
|
|
reference clock for SuperSpeedPlus analog phy, sometimes is
|
|
24M, 25M or 27M, depended on platform.
|
|
- #phy-cells : should be 1
|
|
cell after port phandle is phy type from:
|
|
- PHY_TYPE_USB2
|
|
- PHY_TYPE_USB3
|
|
|
|
The following optional properties are only for debug or HQA test
|
|
Optional properties (PHY_TYPE_USB2 port (child) node):
|
|
- mediatek,eye-src : u32, the value of slew rate calibrate
|
|
- mediatek,eye-vrt : u32, the selection of VRT reference voltage
|
|
- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage
|
|
- mediatek,efuse-intr : u32, the selection of Internal Resistor
|
|
|
|
Optional properties (PHY_TYPE_USB3 port (child) node):
|
|
- mediatek,efuse-intr : u32, the selection of Internal Resistor
|
|
- mediatek,efuse-tx-imp : u32, the selection of TX Impedance
|
|
- mediatek,efuse-rx-imp : u32, the selection of RX Impedance
|
|
|
|
Banks layout of xsphy
|
|
-------------------------------------------------------------
|
|
port offset bank
|
|
u2 port0 0x0000 MISC
|
|
0x0100 FMREG
|
|
0x0300 U2PHY_COM
|
|
u2 port1 0x1000 MISC
|
|
0x1100 FMREG
|
|
0x1300 U2PHY_COM
|
|
u2 port2 0x2000 MISC
|
|
...
|
|
u31 common 0x3000 DIG_GLB
|
|
0x3100 PHYA_GLB
|
|
u31 port0 0x3400 DIG_LN_TOP
|
|
0x3500 DIG_LN_TX0
|
|
0x3600 DIG_LN_RX0
|
|
0x3700 DIG_LN_DAIF
|
|
0x3800 PHYA_LN
|
|
u31 port1 0x3a00 DIG_LN_TOP
|
|
0x3b00 DIG_LN_TX0
|
|
0x3c00 DIG_LN_RX0
|
|
0x3d00 DIG_LN_DAIF
|
|
0x3e00 PHYA_LN
|
|
...
|
|
|
|
DIG_GLB & PHYA_GLB are shared by U31 ports.
|
|
|
|
Example:
|
|
|
|
u3phy: usb-phy@11c40000 {
|
|
compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy";
|
|
reg = <0 0x11c43000 0 0x0200>;
|
|
mediatek,src-ref-clk-mhz = <26>;
|
|
mediatek,src-coef = <17>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
u2port0: usb-phy@11c40000 {
|
|
reg = <0 0x11c40000 0 0x0400>;
|
|
clocks = <&clk48m>;
|
|
clock-names = "ref";
|
|
mediatek,eye-src = <4>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
u3port0: usb-phy@11c43000 {
|
|
reg = <0 0x11c43400 0 0x0500>;
|
|
clocks = <&clk26m>;
|
|
clock-names = "ref";
|
|
mediatek,efuse-intr = <28>;
|
|
#phy-cells = <1>;
|
|
};
|
|
};
|