370 lines
9.8 KiB
C
370 lines
9.8 KiB
C
/*
|
|
* Copyright (c) 2000-2001 Adaptec Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
* ("Disclaimer") and any redistribution must be conditioned upon
|
|
* including a substantially similar Disclaimer requirement for further
|
|
* binary redistribution.
|
|
* 3. Neither the names of the above-listed copyright holders nor the names
|
|
* of any contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGES.
|
|
*
|
|
* String handling code courtesy of Gerard Roudier's <groudier@club-internet.fr>
|
|
* sym driver.
|
|
*
|
|
* $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_proc.c#29 $
|
|
*/
|
|
#include "aic7xxx_osm.h"
|
|
#include "aic7xxx_inline.h"
|
|
#include "aic7xxx_93cx6.h"
|
|
|
|
static void copy_mem_info(struct info_str *info, char *data, int len);
|
|
static int copy_info(struct info_str *info, char *fmt, ...);
|
|
static void ahc_dump_target_state(struct ahc_softc *ahc,
|
|
struct info_str *info,
|
|
u_int our_id, char channel,
|
|
u_int target_id, u_int target_offset);
|
|
static void ahc_dump_device_state(struct info_str *info,
|
|
struct scsi_device *dev);
|
|
static int ahc_proc_write_seeprom(struct ahc_softc *ahc,
|
|
char *buffer, int length);
|
|
|
|
static void
|
|
copy_mem_info(struct info_str *info, char *data, int len)
|
|
{
|
|
if (info->pos + len > info->offset + info->length)
|
|
len = info->offset + info->length - info->pos;
|
|
|
|
if (info->pos + len < info->offset) {
|
|
info->pos += len;
|
|
return;
|
|
}
|
|
|
|
if (info->pos < info->offset) {
|
|
off_t partial;
|
|
|
|
partial = info->offset - info->pos;
|
|
data += partial;
|
|
info->pos += partial;
|
|
len -= partial;
|
|
}
|
|
|
|
if (len > 0) {
|
|
memcpy(info->buffer, data, len);
|
|
info->pos += len;
|
|
info->buffer += len;
|
|
}
|
|
}
|
|
|
|
static int
|
|
copy_info(struct info_str *info, char *fmt, ...)
|
|
{
|
|
va_list args;
|
|
char buf[256];
|
|
int len;
|
|
|
|
va_start(args, fmt);
|
|
len = vsprintf(buf, fmt, args);
|
|
va_end(args);
|
|
|
|
copy_mem_info(info, buf, len);
|
|
return (len);
|
|
}
|
|
|
|
void
|
|
ahc_format_transinfo(struct info_str *info, struct ahc_transinfo *tinfo)
|
|
{
|
|
u_int speed;
|
|
u_int freq;
|
|
u_int mb;
|
|
|
|
speed = 3300;
|
|
freq = 0;
|
|
if (tinfo->offset != 0) {
|
|
freq = aic_calc_syncsrate(tinfo->period);
|
|
speed = freq;
|
|
}
|
|
speed *= (0x01 << tinfo->width);
|
|
mb = speed / 1000;
|
|
if (mb > 0)
|
|
copy_info(info, "%d.%03dMB/s transfers", mb, speed % 1000);
|
|
else
|
|
copy_info(info, "%dKB/s transfers", speed);
|
|
|
|
if (freq != 0) {
|
|
copy_info(info, " (%d.%03dMHz%s, offset %d",
|
|
freq / 1000, freq % 1000,
|
|
(tinfo->ppr_options & MSG_EXT_PPR_DT_REQ) != 0
|
|
? " DT" : "", tinfo->offset);
|
|
}
|
|
|
|
if (tinfo->width > 0) {
|
|
if (freq != 0) {
|
|
copy_info(info, ", ");
|
|
} else {
|
|
copy_info(info, " (");
|
|
}
|
|
copy_info(info, "%dbit)", 8 * (0x01 << tinfo->width));
|
|
} else if (freq != 0) {
|
|
copy_info(info, ")");
|
|
}
|
|
copy_info(info, "\n");
|
|
}
|
|
|
|
static void
|
|
ahc_dump_target_state(struct ahc_softc *ahc, struct info_str *info,
|
|
u_int our_id, char channel, u_int target_id,
|
|
u_int target_offset)
|
|
{
|
|
struct ahc_linux_target *targ;
|
|
struct scsi_target *starget;
|
|
struct ahc_initiator_tinfo *tinfo;
|
|
struct ahc_tmode_tstate *tstate;
|
|
int lun;
|
|
|
|
tinfo = ahc_fetch_transinfo(ahc, channel, our_id,
|
|
target_id, &tstate);
|
|
if ((ahc->features & AHC_TWIN) != 0)
|
|
copy_info(info, "Channel %c ", channel);
|
|
copy_info(info, "Target %d Negotiation Settings\n", target_id);
|
|
copy_info(info, "\tUser: ");
|
|
ahc_format_transinfo(info, &tinfo->user);
|
|
starget = ahc->platform_data->starget[target_offset];
|
|
if (!starget)
|
|
return;
|
|
targ = scsi_transport_target_data(starget);
|
|
|
|
copy_info(info, "\tGoal: ");
|
|
ahc_format_transinfo(info, &tinfo->goal);
|
|
copy_info(info, "\tCurr: ");
|
|
ahc_format_transinfo(info, &tinfo->curr);
|
|
|
|
for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
|
|
struct scsi_device *sdev;
|
|
|
|
sdev = targ->sdev[lun];
|
|
|
|
if (sdev == NULL)
|
|
continue;
|
|
|
|
ahc_dump_device_state(info, sdev);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ahc_dump_device_state(struct info_str *info, struct scsi_device *sdev)
|
|
{
|
|
struct ahc_linux_device *dev = scsi_transport_device_data(sdev);
|
|
|
|
copy_info(info, "\tChannel %c Target %d Lun %d Settings\n",
|
|
sdev->sdev_target->channel + 'A',
|
|
sdev->sdev_target->id, sdev->lun);
|
|
|
|
copy_info(info, "\t\tCommands Queued %ld\n", dev->commands_issued);
|
|
copy_info(info, "\t\tCommands Active %d\n", dev->active);
|
|
copy_info(info, "\t\tCommand Openings %d\n", dev->openings);
|
|
copy_info(info, "\t\tMax Tagged Openings %d\n", dev->maxtags);
|
|
copy_info(info, "\t\tDevice Queue Frozen Count %d\n", dev->qfrozen);
|
|
}
|
|
|
|
static int
|
|
ahc_proc_write_seeprom(struct ahc_softc *ahc, char *buffer, int length)
|
|
{
|
|
struct seeprom_descriptor sd;
|
|
int have_seeprom;
|
|
u_long s;
|
|
int paused;
|
|
int written;
|
|
|
|
/* Default to failure. */
|
|
written = -EINVAL;
|
|
ahc_lock(ahc, &s);
|
|
paused = ahc_is_paused(ahc);
|
|
if (!paused)
|
|
ahc_pause(ahc);
|
|
|
|
if (length != sizeof(struct seeprom_config)) {
|
|
printf("ahc_proc_write_seeprom: incorrect buffer size\n");
|
|
goto done;
|
|
}
|
|
|
|
have_seeprom = ahc_verify_cksum((struct seeprom_config*)buffer);
|
|
if (have_seeprom == 0) {
|
|
printf("ahc_proc_write_seeprom: cksum verification failed\n");
|
|
goto done;
|
|
}
|
|
|
|
sd.sd_ahc = ahc;
|
|
#if AHC_PCI_CONFIG > 0
|
|
if ((ahc->chip & AHC_PCI) != 0) {
|
|
sd.sd_control_offset = SEECTL;
|
|
sd.sd_status_offset = SEECTL;
|
|
sd.sd_dataout_offset = SEECTL;
|
|
if (ahc->flags & AHC_LARGE_SEEPROM)
|
|
sd.sd_chip = C56_66;
|
|
else
|
|
sd.sd_chip = C46;
|
|
sd.sd_MS = SEEMS;
|
|
sd.sd_RDY = SEERDY;
|
|
sd.sd_CS = SEECS;
|
|
sd.sd_CK = SEECK;
|
|
sd.sd_DO = SEEDO;
|
|
sd.sd_DI = SEEDI;
|
|
have_seeprom = ahc_acquire_seeprom(ahc, &sd);
|
|
} else
|
|
#endif
|
|
if ((ahc->chip & AHC_VL) != 0) {
|
|
sd.sd_control_offset = SEECTL_2840;
|
|
sd.sd_status_offset = STATUS_2840;
|
|
sd.sd_dataout_offset = STATUS_2840;
|
|
sd.sd_chip = C46;
|
|
sd.sd_MS = 0;
|
|
sd.sd_RDY = EEPROM_TF;
|
|
sd.sd_CS = CS_2840;
|
|
sd.sd_CK = CK_2840;
|
|
sd.sd_DO = DO_2840;
|
|
sd.sd_DI = DI_2840;
|
|
have_seeprom = TRUE;
|
|
} else {
|
|
printf("ahc_proc_write_seeprom: unsupported adapter type\n");
|
|
goto done;
|
|
}
|
|
|
|
if (!have_seeprom) {
|
|
printf("ahc_proc_write_seeprom: No Serial EEPROM\n");
|
|
goto done;
|
|
} else {
|
|
u_int start_addr;
|
|
|
|
if (ahc->seep_config == NULL) {
|
|
ahc->seep_config = malloc(sizeof(*ahc->seep_config),
|
|
M_DEVBUF, M_NOWAIT);
|
|
if (ahc->seep_config == NULL) {
|
|
printf("aic7xxx: Unable to allocate serial "
|
|
"eeprom buffer. Write failing\n");
|
|
goto done;
|
|
}
|
|
}
|
|
printf("aic7xxx: Writing Serial EEPROM\n");
|
|
start_addr = 32 * (ahc->channel - 'A');
|
|
ahc_write_seeprom(&sd, (u_int16_t *)buffer, start_addr,
|
|
sizeof(struct seeprom_config)/2);
|
|
ahc_read_seeprom(&sd, (uint16_t *)ahc->seep_config,
|
|
start_addr, sizeof(struct seeprom_config)/2);
|
|
#if AHC_PCI_CONFIG > 0
|
|
if ((ahc->chip & AHC_VL) == 0)
|
|
ahc_release_seeprom(&sd);
|
|
#endif
|
|
written = length;
|
|
}
|
|
|
|
done:
|
|
if (!paused)
|
|
ahc_unpause(ahc);
|
|
ahc_unlock(ahc, &s);
|
|
return (written);
|
|
}
|
|
|
|
/*
|
|
* Return information to handle /proc support for the driver.
|
|
*/
|
|
int
|
|
ahc_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start,
|
|
off_t offset, int length, int inout)
|
|
{
|
|
struct ahc_softc *ahc = *(struct ahc_softc **)shost->hostdata;
|
|
struct info_str info;
|
|
char ahc_info[256];
|
|
u_int max_targ;
|
|
u_int i;
|
|
int retval;
|
|
|
|
/* Has data been written to the file? */
|
|
if (inout == TRUE) {
|
|
retval = ahc_proc_write_seeprom(ahc, buffer, length);
|
|
goto done;
|
|
}
|
|
|
|
if (start)
|
|
*start = buffer;
|
|
|
|
info.buffer = buffer;
|
|
info.length = length;
|
|
info.offset = offset;
|
|
info.pos = 0;
|
|
|
|
copy_info(&info, "Adaptec AIC7xxx driver version: %s\n",
|
|
AIC7XXX_DRIVER_VERSION);
|
|
copy_info(&info, "%s\n", ahc->description);
|
|
ahc_controller_info(ahc, ahc_info);
|
|
copy_info(&info, "%s\n", ahc_info);
|
|
copy_info(&info, "Allocated SCBs: %d, SG List Length: %d\n\n",
|
|
ahc->scb_data->numscbs, AHC_NSEG);
|
|
|
|
|
|
if (ahc->seep_config == NULL)
|
|
copy_info(&info, "No Serial EEPROM\n");
|
|
else {
|
|
copy_info(&info, "Serial EEPROM:\n");
|
|
for (i = 0; i < sizeof(*ahc->seep_config)/2; i++) {
|
|
if (((i % 8) == 0) && (i != 0)) {
|
|
copy_info(&info, "\n");
|
|
}
|
|
copy_info(&info, "0x%.4x ",
|
|
((uint16_t*)ahc->seep_config)[i]);
|
|
}
|
|
copy_info(&info, "\n");
|
|
}
|
|
copy_info(&info, "\n");
|
|
|
|
max_targ = 15;
|
|
if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0)
|
|
max_targ = 7;
|
|
|
|
for (i = 0; i <= max_targ; i++) {
|
|
u_int our_id;
|
|
u_int target_id;
|
|
char channel;
|
|
|
|
channel = 'A';
|
|
our_id = ahc->our_id;
|
|
target_id = i;
|
|
if (i > 7 && (ahc->features & AHC_TWIN) != 0) {
|
|
channel = 'B';
|
|
our_id = ahc->our_id_b;
|
|
target_id = i % 8;
|
|
}
|
|
|
|
ahc_dump_target_state(ahc, &info, our_id,
|
|
channel, target_id, i);
|
|
}
|
|
retval = info.pos > info.offset ? info.pos - info.offset : 0;
|
|
done:
|
|
return (retval);
|
|
}
|