232 lines
6.8 KiB
C
232 lines
6.8 KiB
C
/*
|
|
* Broadcom Starfighter 2 switch register defines
|
|
*
|
|
* Copyright (C) 2014, Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
#ifndef __BCM_SF2_REGS_H
|
|
#define __BCM_SF2_REGS_H
|
|
|
|
/* Register set relative to 'REG' */
|
|
#define REG_SWITCH_CNTRL 0x00
|
|
#define MDIO_MASTER_SEL (1 << 0)
|
|
|
|
#define REG_SWITCH_STATUS 0x04
|
|
#define REG_DIR_DATA_WRITE 0x08
|
|
#define REG_DIR_DATA_READ 0x0C
|
|
|
|
#define REG_SWITCH_REVISION 0x18
|
|
#define SF2_REV_MASK 0xffff
|
|
#define SWITCH_TOP_REV_SHIFT 16
|
|
#define SWITCH_TOP_REV_MASK 0xffff
|
|
|
|
#define REG_PHY_REVISION 0x1C
|
|
#define PHY_REVISION_MASK 0xffff
|
|
|
|
#define REG_SPHY_CNTRL 0x2C
|
|
#define IDDQ_BIAS (1 << 0)
|
|
#define EXT_PWR_DOWN (1 << 1)
|
|
#define FORCE_DLL_EN (1 << 2)
|
|
#define IDDQ_GLOBAL_PWR (1 << 3)
|
|
#define CK25_DIS (1 << 4)
|
|
#define PHY_RESET (1 << 5)
|
|
#define PHY_PHYAD_SHIFT 8
|
|
#define PHY_PHYAD_MASK 0x1F
|
|
|
|
#define REG_RGMII_0_BASE 0x34
|
|
#define REG_RGMII_CNTRL 0x00
|
|
#define REG_RGMII_IB_STATUS 0x04
|
|
#define REG_RGMII_RX_CLOCK_DELAY_CNTRL 0x08
|
|
#define REG_RGMII_CNTRL_SIZE 0x0C
|
|
#define REG_RGMII_CNTRL_P(x) (REG_RGMII_0_BASE + \
|
|
((x) * REG_RGMII_CNTRL_SIZE))
|
|
/* Relative to REG_RGMII_CNTRL */
|
|
#define RGMII_MODE_EN (1 << 0)
|
|
#define ID_MODE_DIS (1 << 1)
|
|
#define PORT_MODE_SHIFT 2
|
|
#define INT_EPHY (0 << PORT_MODE_SHIFT)
|
|
#define INT_GPHY (1 << PORT_MODE_SHIFT)
|
|
#define EXT_EPHY (2 << PORT_MODE_SHIFT)
|
|
#define EXT_GPHY (3 << PORT_MODE_SHIFT)
|
|
#define EXT_REVMII (4 << PORT_MODE_SHIFT)
|
|
#define PORT_MODE_MASK 0x7
|
|
#define RVMII_REF_SEL (1 << 5)
|
|
#define RX_PAUSE_EN (1 << 6)
|
|
#define TX_PAUSE_EN (1 << 7)
|
|
#define TX_CLK_STOP_EN (1 << 8)
|
|
#define LPI_COUNT_SHIFT 9
|
|
#define LPI_COUNT_MASK 0x3F
|
|
|
|
/* Register set relative to 'INTRL2_0' and 'INTRL2_1' */
|
|
#define INTRL2_CPU_STATUS 0x00
|
|
#define INTRL2_CPU_SET 0x04
|
|
#define INTRL2_CPU_CLEAR 0x08
|
|
#define INTRL2_CPU_MASK_STATUS 0x0c
|
|
#define INTRL2_CPU_MASK_SET 0x10
|
|
#define INTRL2_CPU_MASK_CLEAR 0x14
|
|
|
|
/* Shared INTRL2_0 and INTRL2_ interrupt sources macros */
|
|
#define P_LINK_UP_IRQ(x) (1 << (0 + (x)))
|
|
#define P_LINK_DOWN_IRQ(x) (1 << (1 + (x)))
|
|
#define P_ENERGY_ON_IRQ(x) (1 << (2 + (x)))
|
|
#define P_ENERGY_OFF_IRQ(x) (1 << (3 + (x)))
|
|
#define P_GPHY_IRQ(x) (1 << (4 + (x)))
|
|
#define P_NUM_IRQ 5
|
|
#define P_IRQ_MASK(x) (P_LINK_UP_IRQ((x)) | \
|
|
P_LINK_DOWN_IRQ((x)) | \
|
|
P_ENERGY_ON_IRQ((x)) | \
|
|
P_ENERGY_OFF_IRQ((x)) | \
|
|
P_GPHY_IRQ((x)))
|
|
|
|
/* INTRL2_0 interrupt sources */
|
|
#define P0_IRQ_OFF 0
|
|
#define MEM_DOUBLE_IRQ (1 << 5)
|
|
#define EEE_LPI_IRQ (1 << 6)
|
|
#define P5_CPU_WAKE_IRQ (1 << 7)
|
|
#define P8_CPU_WAKE_IRQ (1 << 8)
|
|
#define P7_CPU_WAKE_IRQ (1 << 9)
|
|
#define IEEE1588_IRQ (1 << 10)
|
|
#define MDIO_ERR_IRQ (1 << 11)
|
|
#define MDIO_DONE_IRQ (1 << 12)
|
|
#define GISB_ERR_IRQ (1 << 13)
|
|
#define UBUS_ERR_IRQ (1 << 14)
|
|
#define FAILOVER_ON_IRQ (1 << 15)
|
|
#define FAILOVER_OFF_IRQ (1 << 16)
|
|
#define TCAM_SOFT_ERR_IRQ (1 << 17)
|
|
|
|
/* INTRL2_1 interrupt sources */
|
|
#define P7_IRQ_OFF 0
|
|
#define P_IRQ_OFF(x) ((6 - (x)) * P_NUM_IRQ)
|
|
|
|
/* Register set relative to 'CORE' */
|
|
#define CORE_G_PCTL_PORT0 0x00000
|
|
#define CORE_G_PCTL_PORT(x) (CORE_G_PCTL_PORT0 + (x * 0x4))
|
|
#define CORE_IMP_CTL 0x00020
|
|
#define RX_DIS (1 << 0)
|
|
#define TX_DIS (1 << 1)
|
|
#define RX_BCST_EN (1 << 2)
|
|
#define RX_MCST_EN (1 << 3)
|
|
#define RX_UCST_EN (1 << 4)
|
|
#define G_MISTP_STATE_SHIFT 5
|
|
#define G_MISTP_NO_STP (0 << G_MISTP_STATE_SHIFT)
|
|
#define G_MISTP_DIS_STATE (1 << G_MISTP_STATE_SHIFT)
|
|
#define G_MISTP_BLOCK_STATE (2 << G_MISTP_STATE_SHIFT)
|
|
#define G_MISTP_LISTEN_STATE (3 << G_MISTP_STATE_SHIFT)
|
|
#define G_MISTP_LEARN_STATE (4 << G_MISTP_STATE_SHIFT)
|
|
#define G_MISTP_FWD_STATE (5 << G_MISTP_STATE_SHIFT)
|
|
#define G_MISTP_STATE_MASK 0x7
|
|
|
|
#define CORE_SWMODE 0x0002c
|
|
#define SW_FWDG_MODE (1 << 0)
|
|
#define SW_FWDG_EN (1 << 1)
|
|
#define RTRY_LMT_DIS (1 << 2)
|
|
|
|
#define CORE_STS_OVERRIDE_IMP 0x00038
|
|
#define GMII_SPEED_UP_2G (1 << 6)
|
|
#define MII_SW_OR (1 << 7)
|
|
|
|
#define CORE_NEW_CTRL 0x00084
|
|
#define IP_MC (1 << 0)
|
|
#define OUTRANGEERR_DISCARD (1 << 1)
|
|
#define INRANGEERR_DISCARD (1 << 2)
|
|
#define CABLE_DIAG_LEN (1 << 3)
|
|
#define OVERRIDE_AUTO_PD_WAR (1 << 4)
|
|
#define EN_AUTO_PD_WAR (1 << 5)
|
|
#define UC_FWD_EN (1 << 6)
|
|
#define MC_FWD_EN (1 << 7)
|
|
|
|
#define CORE_SWITCH_CTRL 0x00088
|
|
#define MII_DUMB_FWDG_EN (1 << 6)
|
|
|
|
#define CORE_SFT_LRN_CTRL 0x000f8
|
|
#define SW_LEARN_CNTL(x) (1 << (x))
|
|
|
|
#define CORE_STS_OVERRIDE_GMIIP_PORT(x) (0x160 + (x) * 4)
|
|
#define LINK_STS (1 << 0)
|
|
#define DUPLX_MODE (1 << 1)
|
|
#define SPEED_SHIFT 2
|
|
#define SPEED_MASK 0x3
|
|
#define RXFLOW_CNTL (1 << 4)
|
|
#define TXFLOW_CNTL (1 << 5)
|
|
#define SW_OVERRIDE (1 << 6)
|
|
|
|
#define CORE_WATCHDOG_CTRL 0x001e4
|
|
#define SOFTWARE_RESET (1 << 7)
|
|
#define EN_CHIP_RST (1 << 6)
|
|
#define EN_SW_RESET (1 << 4)
|
|
|
|
#define CORE_LNKSTS 0x00400
|
|
#define LNK_STS_MASK 0x1ff
|
|
|
|
#define CORE_SPDSTS 0x00410
|
|
#define SPDSTS_10 0
|
|
#define SPDSTS_100 1
|
|
#define SPDSTS_1000 2
|
|
#define SPDSTS_SHIFT 2
|
|
#define SPDSTS_MASK 0x3
|
|
|
|
#define CORE_DUPSTS 0x00420
|
|
#define CORE_DUPSTS_MASK 0x1ff
|
|
|
|
#define CORE_PAUSESTS 0x00428
|
|
#define PAUSESTS_TX_PAUSE_SHIFT 9
|
|
|
|
#define CORE_GMNCFGCFG 0x0800
|
|
#define RST_MIB_CNT (1 << 0)
|
|
#define RXBPDU_EN (1 << 1)
|
|
|
|
#define CORE_IMP0_PRT_ID 0x0804
|
|
|
|
#define CORE_BRCM_HDR_CTRL 0x0080c
|
|
#define BRCM_HDR_EN_P8 (1 << 0)
|
|
#define BRCM_HDR_EN_P5 (1 << 1)
|
|
#define BRCM_HDR_EN_P7 (1 << 2)
|
|
|
|
#define CORE_BRCM_HDR_CTRL2 0x0828
|
|
|
|
#define CORE_HL_PRTC_CTRL 0x0940
|
|
#define ARP_EN (1 << 0)
|
|
#define RARP_EN (1 << 1)
|
|
#define DHCP_EN (1 << 2)
|
|
#define ICMPV4_EN (1 << 3)
|
|
#define ICMPV6_EN (1 << 4)
|
|
#define ICMPV6_FWD_MODE (1 << 5)
|
|
#define IGMP_DIP_EN (1 << 8)
|
|
#define IGMP_RPTLVE_EN (1 << 9)
|
|
#define IGMP_RTPLVE_FWD_MODE (1 << 10)
|
|
#define IGMP_QRY_EN (1 << 11)
|
|
#define IGMP_QRY_FWD_MODE (1 << 12)
|
|
#define IGMP_UKN_EN (1 << 13)
|
|
#define IGMP_UKN_FWD_MODE (1 << 14)
|
|
#define MLD_RPTDONE_EN (1 << 15)
|
|
#define MLD_RPTDONE_FWD_MODE (1 << 16)
|
|
#define MLD_QRY_EN (1 << 17)
|
|
#define MLD_QRY_FWD_MODE (1 << 18)
|
|
|
|
#define CORE_RST_MIB_CNT_EN 0x0950
|
|
|
|
#define CORE_BRCM_HDR_RX_DIS 0x0980
|
|
#define CORE_BRCM_HDR_TX_DIS 0x0988
|
|
|
|
#define CORE_MEM_PSM_VDD_CTRL 0x2380
|
|
#define P_TXQ_PSM_VDD_SHIFT 2
|
|
#define P_TXQ_PSM_VDD_MASK 0x3
|
|
#define P_TXQ_PSM_VDD(x) (P_TXQ_PSM_VDD_MASK << \
|
|
((x) * P_TXQ_PSM_VDD_SHIFT))
|
|
|
|
#define CORE_P0_MIB_OFFSET 0x8000
|
|
#define P_MIB_SIZE 0x400
|
|
#define CORE_P_MIB_OFFSET(x) (CORE_P0_MIB_OFFSET + (x) * P_MIB_SIZE)
|
|
|
|
#define CORE_PORT_VLAN_CTL_PORT(x) (0xc400 + ((x) * 0x8))
|
|
#define PORT_VLAN_CTRL_MASK 0x1ff
|
|
|
|
#define CORE_EEE_EN_CTRL 0x24800
|
|
#define CORE_EEE_LPI_INDICATE 0x24810
|
|
|
|
#endif /* __BCM_SF2_REGS_H */
|