293 lines
7.4 KiB
C
293 lines
7.4 KiB
C
/*
|
|
* max8952.c - Voltage and current regulation for the Maxim 8952
|
|
*
|
|
* Copyright (C) 2010 Samsung Electronics
|
|
* MyungJoo Ham <myungjoo.ham@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/max8952.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Registers */
|
|
enum {
|
|
MAX8952_REG_MODE0,
|
|
MAX8952_REG_MODE1,
|
|
MAX8952_REG_MODE2,
|
|
MAX8952_REG_MODE3,
|
|
MAX8952_REG_CONTROL,
|
|
MAX8952_REG_SYNC,
|
|
MAX8952_REG_RAMP,
|
|
MAX8952_REG_CHIP_ID1,
|
|
MAX8952_REG_CHIP_ID2,
|
|
};
|
|
|
|
struct max8952_data {
|
|
struct i2c_client *client;
|
|
struct device *dev;
|
|
struct max8952_platform_data *pdata;
|
|
struct regulator_dev *rdev;
|
|
|
|
bool vid0;
|
|
bool vid1;
|
|
};
|
|
|
|
static int max8952_read_reg(struct max8952_data *max8952, u8 reg)
|
|
{
|
|
int ret = i2c_smbus_read_byte_data(max8952->client, reg);
|
|
if (ret > 0)
|
|
ret &= 0xff;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int max8952_write_reg(struct max8952_data *max8952,
|
|
u8 reg, u8 value)
|
|
{
|
|
return i2c_smbus_write_byte_data(max8952->client, reg, value);
|
|
}
|
|
|
|
static int max8952_list_voltage(struct regulator_dev *rdev,
|
|
unsigned int selector)
|
|
{
|
|
struct max8952_data *max8952 = rdev_get_drvdata(rdev);
|
|
|
|
if (rdev_get_id(rdev) != 0)
|
|
return -EINVAL;
|
|
|
|
return (max8952->pdata->dvs_mode[selector] * 10 + 770) * 1000;
|
|
}
|
|
|
|
static int max8952_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
struct max8952_data *max8952 = rdev_get_drvdata(rdev);
|
|
u8 vid = 0;
|
|
|
|
if (max8952->vid0)
|
|
vid += 1;
|
|
if (max8952->vid1)
|
|
vid += 2;
|
|
|
|
return vid;
|
|
}
|
|
|
|
static int max8952_set_voltage_sel(struct regulator_dev *rdev,
|
|
unsigned selector)
|
|
{
|
|
struct max8952_data *max8952 = rdev_get_drvdata(rdev);
|
|
|
|
if (!gpio_is_valid(max8952->pdata->gpio_vid0) ||
|
|
!gpio_is_valid(max8952->pdata->gpio_vid1)) {
|
|
/* DVS not supported */
|
|
return -EPERM;
|
|
}
|
|
|
|
max8952->vid0 = selector & 0x1;
|
|
max8952->vid1 = (selector >> 1) & 0x1;
|
|
gpio_set_value(max8952->pdata->gpio_vid0, max8952->vid0);
|
|
gpio_set_value(max8952->pdata->gpio_vid1, max8952->vid1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct regulator_ops max8952_ops = {
|
|
.list_voltage = max8952_list_voltage,
|
|
.get_voltage_sel = max8952_get_voltage_sel,
|
|
.set_voltage_sel = max8952_set_voltage_sel,
|
|
};
|
|
|
|
static const struct regulator_desc regulator = {
|
|
.name = "MAX8952_VOUT",
|
|
.id = 0,
|
|
.n_voltages = MAX8952_NUM_DVS_MODE,
|
|
.ops = &max8952_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int max8952_pmic_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *i2c_id)
|
|
{
|
|
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
|
|
struct max8952_platform_data *pdata = client->dev.platform_data;
|
|
struct regulator_config config = { };
|
|
struct max8952_data *max8952;
|
|
|
|
int ret = 0, err = 0;
|
|
|
|
if (!pdata) {
|
|
dev_err(&client->dev, "Require the platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
|
|
return -EIO;
|
|
|
|
max8952 = devm_kzalloc(&client->dev, sizeof(struct max8952_data),
|
|
GFP_KERNEL);
|
|
if (!max8952)
|
|
return -ENOMEM;
|
|
|
|
max8952->client = client;
|
|
max8952->dev = &client->dev;
|
|
max8952->pdata = pdata;
|
|
|
|
config.dev = max8952->dev;
|
|
config.init_data = &pdata->reg_data;
|
|
config.driver_data = max8952;
|
|
|
|
config.ena_gpio = pdata->gpio_en;
|
|
if (pdata->reg_data.constraints.boot_on)
|
|
config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
|
|
|
|
max8952->rdev = regulator_register(®ulator, &config);
|
|
|
|
if (IS_ERR(max8952->rdev)) {
|
|
ret = PTR_ERR(max8952->rdev);
|
|
dev_err(max8952->dev, "regulator init failed (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
max8952->vid0 = pdata->default_mode & 0x1;
|
|
max8952->vid1 = (pdata->default_mode >> 1) & 0x1;
|
|
|
|
if (gpio_is_valid(pdata->gpio_vid0) &&
|
|
gpio_is_valid(pdata->gpio_vid1)) {
|
|
if (!gpio_request(pdata->gpio_vid0, "MAX8952 VID0"))
|
|
gpio_direction_output(pdata->gpio_vid0,
|
|
(pdata->default_mode) & 0x1);
|
|
else
|
|
err = 1;
|
|
|
|
if (!gpio_request(pdata->gpio_vid1, "MAX8952 VID1"))
|
|
gpio_direction_output(pdata->gpio_vid1,
|
|
(pdata->default_mode >> 1) & 0x1);
|
|
else {
|
|
if (!err)
|
|
gpio_free(pdata->gpio_vid0);
|
|
err = 2;
|
|
}
|
|
|
|
} else
|
|
err = 3;
|
|
|
|
if (err) {
|
|
dev_warn(max8952->dev, "VID0/1 gpio invalid: "
|
|
"DVS not available.\n");
|
|
max8952->vid0 = 0;
|
|
max8952->vid1 = 0;
|
|
/* Mark invalid */
|
|
pdata->gpio_vid0 = -1;
|
|
pdata->gpio_vid1 = -1;
|
|
|
|
/* Disable Pulldown of EN only */
|
|
max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x60);
|
|
|
|
dev_err(max8952->dev, "DVS modes disabled because VID0 and VID1"
|
|
" do not have proper controls.\n");
|
|
} else {
|
|
/*
|
|
* Disable Pulldown on EN, VID0, VID1 to reduce
|
|
* leakage current of MAX8952 assuming that MAX8952
|
|
* is turned on (EN==1). Note that without having VID0/1
|
|
* properly connected, turning pulldown off can be
|
|
* problematic. Thus, turn this off only when they are
|
|
* controllable by GPIO.
|
|
*/
|
|
max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x0);
|
|
}
|
|
|
|
max8952_write_reg(max8952, MAX8952_REG_MODE0,
|
|
(max8952_read_reg(max8952,
|
|
MAX8952_REG_MODE0) & 0xC0) |
|
|
(pdata->dvs_mode[0] & 0x3F));
|
|
max8952_write_reg(max8952, MAX8952_REG_MODE1,
|
|
(max8952_read_reg(max8952,
|
|
MAX8952_REG_MODE1) & 0xC0) |
|
|
(pdata->dvs_mode[1] & 0x3F));
|
|
max8952_write_reg(max8952, MAX8952_REG_MODE2,
|
|
(max8952_read_reg(max8952,
|
|
MAX8952_REG_MODE2) & 0xC0) |
|
|
(pdata->dvs_mode[2] & 0x3F));
|
|
max8952_write_reg(max8952, MAX8952_REG_MODE3,
|
|
(max8952_read_reg(max8952,
|
|
MAX8952_REG_MODE3) & 0xC0) |
|
|
(pdata->dvs_mode[3] & 0x3F));
|
|
|
|
max8952_write_reg(max8952, MAX8952_REG_SYNC,
|
|
(max8952_read_reg(max8952, MAX8952_REG_SYNC) & 0x3F) |
|
|
((pdata->sync_freq & 0x3) << 6));
|
|
max8952_write_reg(max8952, MAX8952_REG_RAMP,
|
|
(max8952_read_reg(max8952, MAX8952_REG_RAMP) & 0x1F) |
|
|
((pdata->ramp_speed & 0x7) << 5));
|
|
|
|
i2c_set_clientdata(client, max8952);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max8952_pmic_remove(struct i2c_client *client)
|
|
{
|
|
struct max8952_data *max8952 = i2c_get_clientdata(client);
|
|
struct max8952_platform_data *pdata = max8952->pdata;
|
|
struct regulator_dev *rdev = max8952->rdev;
|
|
|
|
regulator_unregister(rdev);
|
|
|
|
gpio_free(pdata->gpio_vid0);
|
|
gpio_free(pdata->gpio_vid1);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id max8952_ids[] = {
|
|
{ "max8952", 0 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, max8952_ids);
|
|
|
|
static struct i2c_driver max8952_pmic_driver = {
|
|
.probe = max8952_pmic_probe,
|
|
.remove = max8952_pmic_remove,
|
|
.driver = {
|
|
.name = "max8952",
|
|
},
|
|
.id_table = max8952_ids,
|
|
};
|
|
|
|
static int __init max8952_pmic_init(void)
|
|
{
|
|
return i2c_add_driver(&max8952_pmic_driver);
|
|
}
|
|
subsys_initcall(max8952_pmic_init);
|
|
|
|
static void __exit max8952_pmic_exit(void)
|
|
{
|
|
i2c_del_driver(&max8952_pmic_driver);
|
|
}
|
|
module_exit(max8952_pmic_exit);
|
|
|
|
MODULE_DESCRIPTION("MAXIM 8952 voltage regulator driver");
|
|
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
|
|
MODULE_LICENSE("GPL");
|