linux_old1/arch
Davidlohr Bueso 642fa448ae sched/core: Remove set_task_state()
This is a nasty interface and setting the state of a foreign task must
not be done. As of the following commit:

  be628be095 ("bcache: Make gc wakeup sane, remove set_task_state()")

... everyone in the kernel calls set_task_state() with current, allowing
the helper to be removed.

However, as the comment indicates, it is still around for those archs
where computing current is more expensive than using a pointer, at least
in theory. An important arch that is affected is arm64, however this has
been addressed now [1] and performance is up to par making no difference
with either calls.

Of all the callers, if any, it's the locking bits that would care most
about this -- ie: we end up passing a tsk pointer to a lot of the lock
slowpath, and setting ->state on that. The following numbers are based
on two tests: a custom ad-hoc microbenchmark that just measures
latencies (for ~65 million calls) between get_task_state() vs
get_current_state().

Secondly for a higher overview, an unlink microbenchmark was used,
which pounds on a single file with open, close,unlink combos with
increasing thread counts (up to 4x ncpus). While the workload is quite
unrealistic, it does contend a lot on the inode mutex or now rwsem.

[1] https://lkml.kernel.org/r/1483468021-8237-1-git-send-email-mark.rutland@arm.com

== 1. x86-64 ==

Avg runtime set_task_state():    601 msecs
Avg runtime set_current_state(): 552 msecs

                                            vanilla                 dirty
Hmean    unlink1-processes-2      36089.26 (  0.00%)    38977.33 (  8.00%)
Hmean    unlink1-processes-5      28555.01 (  0.00%)    29832.55 (  4.28%)
Hmean    unlink1-processes-8      37323.75 (  0.00%)    44974.57 ( 20.50%)
Hmean    unlink1-processes-12     43571.88 (  0.00%)    44283.01 (  1.63%)
Hmean    unlink1-processes-21     34431.52 (  0.00%)    38284.45 ( 11.19%)
Hmean    unlink1-processes-30     34813.26 (  0.00%)    37975.17 (  9.08%)
Hmean    unlink1-processes-48     37048.90 (  0.00%)    39862.78 (  7.59%)
Hmean    unlink1-processes-79     35630.01 (  0.00%)    36855.30 (  3.44%)
Hmean    unlink1-processes-110    36115.85 (  0.00%)    39843.91 ( 10.32%)
Hmean    unlink1-processes-141    32546.96 (  0.00%)    35418.52 (  8.82%)
Hmean    unlink1-processes-172    34674.79 (  0.00%)    36899.21 (  6.42%)
Hmean    unlink1-processes-203    37303.11 (  0.00%)    36393.04 ( -2.44%)
Hmean    unlink1-processes-224    35712.13 (  0.00%)    36685.96 (  2.73%)

== 2. ppc64le ==

Avg runtime set_task_state():  938 msecs
Avg runtime set_current_state: 940 msecs

                                            vanilla                 dirty
Hmean    unlink1-processes-2      19269.19 (  0.00%)    30704.50 ( 59.35%)
Hmean    unlink1-processes-5      20106.15 (  0.00%)    21804.15 (  8.45%)
Hmean    unlink1-processes-8      17496.97 (  0.00%)    17243.28 ( -1.45%)
Hmean    unlink1-processes-12     14224.15 (  0.00%)    17240.21 ( 21.20%)
Hmean    unlink1-processes-21     14155.66 (  0.00%)    15681.23 ( 10.78%)
Hmean    unlink1-processes-30     14450.70 (  0.00%)    15995.83 ( 10.69%)
Hmean    unlink1-processes-48     16945.57 (  0.00%)    16370.42 ( -3.39%)
Hmean    unlink1-processes-79     15788.39 (  0.00%)    14639.27 ( -7.28%)
Hmean    unlink1-processes-110    14268.48 (  0.00%)    14377.40 (  0.76%)
Hmean    unlink1-processes-141    14023.65 (  0.00%)    16271.69 ( 16.03%)
Hmean    unlink1-processes-172    13417.62 (  0.00%)    16067.55 ( 19.75%)
Hmean    unlink1-processes-203    15293.08 (  0.00%)    15440.40 (  0.96%)
Hmean    unlink1-processes-234    13719.32 (  0.00%)    16190.74 ( 18.01%)
Hmean    unlink1-processes-265    16400.97 (  0.00%)    16115.22 ( -1.74%)
Hmean    unlink1-processes-296    14388.60 (  0.00%)    16216.13 ( 12.70%)
Hmean    unlink1-processes-320    15771.85 (  0.00%)    15905.96 (  0.85%)

x86-64 (known to be fast for get_current()/this_cpu_read_stable() caching)
and ppc64 (with paca) show similar improvements in the unlink microbenches.
The small delta for ppc64 (2ms), does not represent the gains on the unlink
runs. In the case of x86, there was a decent amount of variation in the
latency runs, but always within a 20 to 50ms increase), ppc was more constant.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: mark.rutland@arm.com
Link: http://lkml.kernel.org/r/1483479794-14013-5-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-14 11:14:16 +01:00
..
alpha clocksource: Use a plain u64 instead of cycle_t 2016-12-25 11:04:12 +01:00
arc 2nd round of ARC udpates for 4.10rc1 2016-12-23 10:22:47 -08:00
arm This pull request contains fixes for the following issues 2017-01-04 16:43:00 +01:00
arm64 - Re-introduce the arm64 get_current() optimisation 2017-01-06 15:18:58 -08:00
avr32 clocksource: Use a plain u64 instead of cycle_t 2016-12-25 11:04:12 +01:00
blackfin Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2016-12-25 14:30:04 -08:00
c6x clocksource: Use a plain u64 instead of cycle_t 2016-12-25 11:04:12 +01:00
cris Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
frv Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
h8300 Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
hexagon clocksource: Use a plain u64 instead of cycle_t 2016-12-25 11:04:12 +01:00
ia64 clocksource: Use a plain u64 instead of cycle_t 2016-12-25 11:04:12 +01:00
m32r Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
m68k clocksource: Use a plain u64 instead of cycle_t 2016-12-25 11:04:12 +01:00
metag Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2016-12-25 14:05:56 -08:00
microblaze clocksource: Use a plain u64 instead of cycle_t 2016-12-25 11:04:12 +01:00
mips KVM fixes for v4.10-rc3 2017-01-06 15:27:17 -08:00
mn10300 clocksource: Use a plain u64 instead of cycle_t 2016-12-25 11:04:12 +01:00
nios2 clocksource: Use a plain u64 instead of cycle_t 2016-12-25 11:04:12 +01:00
openrisc openrisc: Add _text symbol to fix ksym build error 2017-01-02 10:35:11 +09:00
parisc parisc: Add line-break when printing segfault info 2017-01-02 18:07:25 +01:00
powerpc powerpc: Fix build warning on 32-bit PPC 2016-12-25 16:12:20 -08:00
s390 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux 2017-01-02 09:08:45 -08:00
score Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
sh Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
sparc clocksource: Use a plain u64 instead of cycle_t 2016-12-25 11:04:12 +01:00
tile Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
um sched/core: Remove set_task_state() 2017-01-14 11:14:16 +01:00
unicore32 clocksource: Use a plain u64 instead of cycle_t 2016-12-25 11:04:12 +01:00
x86 locking/spinlocks/x86, paravirt: Remove paravirt_ticketlocks_enabled 2017-01-14 09:33:46 +01:00
xtensa Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2016-12-25 14:30:04 -08:00
.gitignore
Kconfig powerpc: ima: get the kexec buffer passed by the previous kernel 2016-12-20 09:48:40 -08:00