linux_old1/drivers/usb
Luca Olivetti 0c967e7ecd USB: serial: pl2303 works at 500kbps
My PL2303HX works at 500kbps after applying this patch.
I suppose that it could work at other non standard speeds since this fix

"correctly handle baudrates above 115200"
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/usb/serial/pl2303.c?id=8d48fdf689fed2c73c493e5146d1463689246442

came after this one

"fix baud rate handling in case of unsupported values"
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/usb/serial/pl2303.c?id=25b8286805e856c8c7fda127018e31032c918015

but I only can test it with 500000.
Patch made against mainline but tested with 3.4.45

Signed-off-by: Luca Olivetti <luca@ventoso.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 14:33:26 -07:00
..
atm USB: cxacru: potential underflow in cxacru_cm_get_array() 2013-05-20 11:35:47 -07:00
c67x00 usb: c67x00 RetryCnt value in c67x00 TD should be 3 2013-03-07 12:31:37 +08:00
chipidea usb, chipidea: remove redundant D0 power state set 2013-06-03 11:01:36 -07:00
class USB: usbtmc: Change magic number to constant 2013-05-16 17:50:51 -07:00
core Allow the USB HCD to create Wireless USB root hubs 2013-06-03 10:52:40 -07:00
dwc3 USB: set device dma_mask without reference to global data 2013-05-16 17:30:52 -07:00
early fix build of EHCI debug port code when USB_CHIPIDEA but !USB_EHCI_HCD 2012-11-02 10:13:33 -07:00
gadget Merge 3.10-rc3 into usb-next 2013-05-27 11:00:52 +09:00
host USB: OHCI: add a name for the platform-private field 2013-06-03 11:03:18 -07:00
image USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
misc usb: misc: usb3503: Remove 100ms sleep on reset, conform to data sheet 2013-06-03 11:01:09 -07:00
mon USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
musb USB: MUSB: upgrade the isochronous API 2013-05-30 21:34:29 +09:00
phy Merge 3.10-rc3 into usb-next 2013-05-27 11:00:52 +09:00
renesas_usbhs USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
serial USB: serial: pl2303 works at 500kbps 2013-06-03 14:33:26 -07:00
storage Merge 3.10-rc3 into usb-next 2013-05-27 11:00:52 +09:00
wusbcore USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
Kconfig USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
Makefile usb host: Faraday USB2.0 FUSBH200-HCD driver 2013-05-17 10:12:52 -07:00
README
usb-common.c usb: otg: move usb_otg_state_string to usb-common.c 2013-03-18 11:18:03 +02:00
usb-skeleton.c USB: usb-skeleton.c: fix blocked forever in skel_read 2013-03-25 13:32:20 -07:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.