224 lines
5.3 KiB
C
224 lines
5.3 KiB
C
/*
|
|
* linux/arch/arm/mach-at91/board-afeb-9260v1.c
|
|
*
|
|
* Copyright (C) 2005 SAN People
|
|
* Copyright (C) 2006 Atmel
|
|
* Copyright (C) 2008 Sergey Lapin
|
|
*
|
|
* A custom board designed as open hardware; PCBs and various information
|
|
* is available at http://groups.google.com/group/arm9fpga-evolution-board/
|
|
* Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <mach/board.h>
|
|
|
|
#include "generic.h"
|
|
|
|
|
|
static void __init afeb9260_init_early(void)
|
|
{
|
|
/* Initialize processor: 18.432 MHz crystal */
|
|
at91_initialize(18432000);
|
|
|
|
/* DBGU on ttyS0. (Rx & Tx only) */
|
|
at91_register_uart(0, 0, 0);
|
|
|
|
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
|
|
at91_register_uart(AT91SAM9260_ID_US0, 1,
|
|
ATMEL_UART_CTS | ATMEL_UART_RTS
|
|
| ATMEL_UART_DTR | ATMEL_UART_DSR
|
|
| ATMEL_UART_DCD | ATMEL_UART_RI);
|
|
|
|
/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
|
|
at91_register_uart(AT91SAM9260_ID_US1, 2,
|
|
ATMEL_UART_CTS | ATMEL_UART_RTS);
|
|
|
|
/* set serial console to ttyS0 (ie, DBGU) */
|
|
at91_set_serial_console(0);
|
|
}
|
|
|
|
/*
|
|
* USB Host port
|
|
*/
|
|
static struct at91_usbh_data __initdata afeb9260_usbh_data = {
|
|
.ports = 1,
|
|
.vbus_pin = {-EINVAL, -EINVAL},
|
|
.overcurrent_pin= {-EINVAL, -EINVAL},
|
|
};
|
|
|
|
/*
|
|
* USB Device port
|
|
*/
|
|
static struct at91_udc_data __initdata afeb9260_udc_data = {
|
|
.vbus_pin = AT91_PIN_PC5,
|
|
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
* SPI devices.
|
|
*/
|
|
static struct spi_board_info afeb9260_spi_devices[] = {
|
|
{ /* DataFlash chip */
|
|
.modalias = "mtd_dataflash",
|
|
.chip_select = 1,
|
|
.max_speed_hz = 15 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
},
|
|
};
|
|
|
|
|
|
/*
|
|
* MACB Ethernet device
|
|
*/
|
|
static struct macb_platform_data __initdata afeb9260_macb_data = {
|
|
.phy_irq_pin = AT91_PIN_PA9,
|
|
.is_rmii = 0,
|
|
};
|
|
|
|
|
|
/*
|
|
* NAND flash
|
|
*/
|
|
static struct mtd_partition __initdata afeb9260_nand_partition[] = {
|
|
{
|
|
.name = "bootloader",
|
|
.offset = 0,
|
|
.size = (640 * SZ_1K),
|
|
},
|
|
{
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_NXTBLK,
|
|
.size = SZ_2M,
|
|
},
|
|
{
|
|
.name = "rootfs",
|
|
.offset = MTDPART_OFS_NXTBLK,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct atmel_nand_data __initdata afeb9260_nand_data = {
|
|
.ale = 21,
|
|
.cle = 22,
|
|
.rdy_pin = AT91_PIN_PC13,
|
|
.enable_pin = AT91_PIN_PC14,
|
|
.bus_width_16 = 0,
|
|
.ecc_mode = NAND_ECC_SOFT,
|
|
.parts = afeb9260_nand_partition,
|
|
.num_parts = ARRAY_SIZE(afeb9260_nand_partition),
|
|
.det_pin = -EINVAL,
|
|
};
|
|
|
|
|
|
/*
|
|
* MCI (SD/MMC)
|
|
*/
|
|
static struct at91_mmc_data __initdata afeb9260_mmc_data = {
|
|
.det_pin = AT91_PIN_PC9,
|
|
.wp_pin = AT91_PIN_PC4,
|
|
.slot_b = 1,
|
|
.wire4 = 1,
|
|
.vcc_pin = -EINVAL,
|
|
};
|
|
|
|
|
|
|
|
static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("tlv320aic23", 0x1a),
|
|
}, {
|
|
I2C_BOARD_INFO("fm3130", 0x68),
|
|
}, {
|
|
I2C_BOARD_INFO("24c64", 0x50),
|
|
},
|
|
};
|
|
|
|
/*
|
|
* IDE (CF True IDE mode)
|
|
*/
|
|
static struct at91_cf_data afeb9260_cf_data = {
|
|
.chipselect = 4,
|
|
.irq_pin = AT91_PIN_PA6,
|
|
.det_pin = -EINVAL,
|
|
.vcc_pin = -EINVAL,
|
|
.rst_pin = AT91_PIN_PA7,
|
|
.flags = AT91_CF_TRUE_IDE,
|
|
};
|
|
|
|
static void __init afeb9260_board_init(void)
|
|
{
|
|
/* Serial */
|
|
at91_add_device_serial();
|
|
/* USB Host */
|
|
at91_add_device_usbh(&afeb9260_usbh_data);
|
|
/* USB Device */
|
|
at91_add_device_udc(&afeb9260_udc_data);
|
|
/* SPI */
|
|
at91_add_device_spi(afeb9260_spi_devices,
|
|
ARRAY_SIZE(afeb9260_spi_devices));
|
|
/* NAND */
|
|
at91_add_device_nand(&afeb9260_nand_data);
|
|
/* Ethernet */
|
|
at91_add_device_eth(&afeb9260_macb_data);
|
|
|
|
/* Standard function's pin assignments are not
|
|
* appropriate for us and generic code provide
|
|
* no API to configure these pins any other way */
|
|
at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
|
|
at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
|
|
/* MMC */
|
|
at91_add_device_mmc(0, &afeb9260_mmc_data);
|
|
/* I2C */
|
|
at91_add_device_i2c(afeb9260_i2c_devices,
|
|
ARRAY_SIZE(afeb9260_i2c_devices));
|
|
/* Audio */
|
|
at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
|
|
/* IDE */
|
|
at91_add_device_cf(&afeb9260_cf_data);
|
|
}
|
|
|
|
MACHINE_START(AFEB9260, "Custom afeb9260 board")
|
|
/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
|
|
.timer = &at91sam926x_timer,
|
|
.map_io = at91_map_io,
|
|
.init_early = afeb9260_init_early,
|
|
.init_irq = at91_init_irq_default,
|
|
.init_machine = afeb9260_board_init,
|
|
MACHINE_END
|
|
|