linux_old1/drivers/firmware
Linus Torvalds 948869fa9f MIPS changes for 4.17
These are the main MIPS changes for 4.17. Rough overview:
 
  (1) generic platform: Add support for Microsemi Ocelot SoCs
 
  (2) crypto: Add CRC32 and CRC32C HW acceleration module
 
  (3) Various cleanups and misc improvements
 
 Miscellaneous:
 
  - Hang more efficiently on halt/powerdown/restart
 
  - pm-cps: Block system suspend when a JTAG probe is present
 
  - Expand make help text for generic defconfigs
    - Refactor handling of legacy defconfigs
 
  - Determine the entry point from the ELF file header to fix microMIPS
    for certain toolchains
 
  - Introduce isa-rev.h for MIPS_ISA_REV and use to simplify other code
 
 Minor cleanups:
 
  - DTS: boston/ci20: Unit name cleanups and correction
 
  - kdump: Make the default for PHYSICAL_START always 64-bit
 
  - Constify gpio_led in Alchemy, AR7, and TXX9
 
  - Silence a couple of W=1 warnings
 
  - Remove duplicate includes
 
 Platform support:
 
 ath79:
 
  - Fix AR724X_PLL_REG_PCIE_CONFIG offset
 
 BCM47xx:
 
  - FIRMWARE: Use mac_pton() for MAC address parsing
 
  - Add Luxul XAP1500/XWR1750 WiFi LEDs
 
  - Use standard reset button for Luxul XWR-1750
 
 BMIPS:
 
  - Enable CONFIG_BRCMSTB_PM in bmips_stb_defconfig for build coverage
 
  - Add STB PM, wake-up timer, watchdog DT nodes
 
 Generic platform:
 
  - Add support for Microsemi Ocelot
    - dt-bindings: Add vendor prefix for Microsemi Corporation
    - dt-bindings: Add bindings for Microsemi SoCs
    - Add ocelot SoC & PCB123 board DTS files
    - MAINTAINERS: Add entry for Microsemi MIPS SoCs
 
  - Enable crc32-mips on r6 configs
 
 Octeon:
 
  - Drop '.' after newlines in printk calls
 
 ralink:
 
  - pci-mt7621: Enable PCIe on MT7688
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEd80NauSabkiESfLYbAtpk944dnoFAlrL1tMACgkQbAtpk944
 dnpkhg//UnKOmj4xiQf5ik4XjSDHo2dcUzQKPLq/grzpc9yC2I6bgJ32gcQnD/rw
 x2f64DAjmbIJEY/hCGLEOH82/SqU5vF5gI+BtSKE6Ti28dyQH68pvyHRYIZBFx62
 WRYAf50Spa/q/bOJYv4/eTqjEc7FPMaUll3kH5NMiBB3X5bIeq3w+x78YBKjAqPB
 IJgHF/JnlpD8UvQ0RCl1fIXhkRYeNuTyiAseVI3ygAqbMFMGkTevePWl82D+pWuo
 W9BFaliNt/9TNgq5/L91a/uhSuo6INRls1tFQT9cPa6n4GJxLpUtO7a3v4Xgaukj
 TeXTkXZl4PEUfeTA3cVaXrENTN4sCwThkxvrKwefbUBiIa+/TDi/Wgxi3n+rKwi2
 Vu4V36uxnO/vNU7Sgp/jHdRJyxw06GfRy55MvToFlk1S25Gwt6zW2O0o8nAHwCDW
 zvoRfSkasElKwnM3zKR/mrdDn7qPulFfiyWyKuuY3bIXsaTnItO1JJ/rbgKuIXr7
 lo0eVZ7GhuWfuLCEHZ99rWsGz0SjuQQIb4c6faNELp6gTwIpz9bbsOHRuajvfoSF
 8jmPjUocbaRR0odyFBqsejwBmeebDoeIZljzD50ImSoYftEMgRoQ448mIm0EuWVU
 KY+85MIeK5zwWXKd4VBexgLvPggGURaOEEXKisgvoE3NjCuO2nw=
 =4vUc
 -----END PGP SIGNATURE-----

Merge tag 'mips_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

Pull MIPS updates from James Hogan:
 "These are the main MIPS changes for 4.17. Rough overview:

   (1) generic platform: Add support for Microsemi Ocelot SoCs

   (2) crypto: Add CRC32 and CRC32C HW acceleration module

   (3) Various cleanups and misc improvements

  More detailed summary:

  Miscellaneous:
   - hang more efficiently on halt/powerdown/restart
   - pm-cps: Block system suspend when a JTAG probe is present
   - expand make help text for generic defconfigs
   - refactor handling of legacy defconfigs
   - determine the entry point from the ELF file header to fix microMIPS
     for certain toolchains
   - introduce isa-rev.h for MIPS_ISA_REV and use to simplify other code

  Minor cleanups:
   - DTS: boston/ci20: Unit name cleanups and correction
   - kdump: Make the default for PHYSICAL_START always 64-bit
   - constify gpio_led in Alchemy, AR7, and TXX9
   - silence a couple of W=1 warnings
   - remove duplicate includes

  Platform support:
  Generic platform:
   - add support for Microsemi Ocelot
   - dt-bindings: Add vendor prefix for Microsemi Corporation
   - dt-bindings: Add bindings for Microsemi SoCs
   - add ocelot SoC & PCB123 board DTS files
   - MAINTAINERS: Add entry for Microsemi MIPS SoCs
   - enable crc32-mips on r6 configs

  ath79:
   - fix AR724X_PLL_REG_PCIE_CONFIG offset

  BCM47xx:
   - firmware: Use mac_pton() for MAC address parsing
   - add Luxul XAP1500/XWR1750 WiFi LEDs
   - use standard reset button for Luxul XWR-1750

  BMIPS:
   - enable CONFIG_BRCMSTB_PM in bmips_stb_defconfig for build coverage
   - add STB PM, wake-up timer, watchdog DT nodes

  Octeon:
   - drop '.' after newlines in printk calls

  ralink:
   - pci-mt7621: Enable PCIe on MT7688"

* tag 'mips_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (37 commits)
  MIPS: BCM47XX: Use standard reset button for Luxul XWR-1750
  MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs
  MIPS: Make the default for PHYSICAL_START always 64-bit
  MIPS: Use the entry point from the ELF file header
  MAINTAINERS: Add entry for Microsemi MIPS SoCs
  MIPS: generic: Add support for Microsemi Ocelot
  MIPS: mscc: Add ocelot PCB123 device tree
  MIPS: mscc: Add ocelot dtsi
  dt-bindings: mips: Add bindings for Microsemi SoCs
  dt-bindings: Add vendor prefix for Microsemi Corporation
  MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset
  MIPS: pci-mt7620: Enable PCIe on MT7688
  MIPS: pm-cps: Block system suspend when a JTAG probe is present
  MIPS: VDSO: Replace __mips_isa_rev with MIPS_ISA_REV
  MIPS: BPF: Replace __mips_isa_rev with MIPS_ISA_REV
  MIPS: cpu-features.h: Replace __mips_isa_rev with MIPS_ISA_REV
  MIPS: Introduce isa-rev.h to define MIPS_ISA_REV
  MIPS: Hang more efficiently on halt/powerdown/restart
  FIRMWARE: bcm47xx_nvram: Replace mac address parsing
  MIPS: BMIPS: Add Broadcom STB watchdog nodes
  ...
2018-04-10 11:39:22 -07:00
..
arm_scmi firmware: arm_scmi: prevent accessing rate_discrete uninitialized 2018-03-20 12:20:27 +00:00
broadcom FIRMWARE: bcm47xx_nvram: Replace mac address parsing 2018-03-09 11:22:21 +00:00
efi Merge branch 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2018-04-02 17:46:37 -07:00
google firmware: vpd: Fix platform driver and device registration/unregistration 2017-11-28 16:57:18 +01:00
meson firmware: meson-sm: rework meson_sm_init to use module_platform_driver_probe 2018-03-07 17:33:52 -08:00
tegra firmware: tegra: adjust tested variable 2018-03-08 14:43:13 +01:00
Kconfig firmware: arm_scmi: add device power domain support using genpd 2018-02-28 16:37:57 +00:00
Makefile firmware: arm_scmi: add basic driver infrastructure for SCMI 2018-02-28 16:37:57 +00:00
arm_scpi.c firmware: arm_scpi: improve info message for pre-1.0 firmware 2018-02-23 15:13:34 +00:00
arm_sdei.c firmware: arm_sdei: Fix return value check in sdei_present_dt() 2018-01-15 18:16:59 +00:00
dcdbas.c platform/x86: Fix dell driver init order 2018-03-14 11:05:53 -07:00
dcdbas.h
dell_rbu.c
dmi-id.c firmware: dmi: Fix permissions of product_family 2017-06-15 13:46:01 +02:00
dmi-sysfs.c firmware: dmi: handle missing DMI data gracefully 2018-02-03 11:25:20 +01:00
dmi_scan.c * Add NVDIMM support to EDAC (Tony Luck) 2018-04-05 14:21:13 -07:00
edd.c edd: don't spam log if no EDD information is present 2018-03-27 09:51:23 +02:00
iscsi_ibft.c ibft: Deprecate pci_get_bus_and_slot() 2018-01-11 17:26:55 -06:00
iscsi_ibft_find.c efi: Make 'efi_enabled' a function to query EFI facilities 2013-01-30 11:51:59 -08:00
memmap.c drivers/firmware/memmap.c: fix kernel-doc format 2015-06-25 17:00:41 -07:00
pcdp.c x86, mpparse, x86/acpi, x86/PCI, x86/dmi, SFI: Use memremap() for RAM mappings 2017-07-18 11:37:58 +02:00
pcdp.h
psci.c firmware/psci: Expose SMCCC version through psci_ops 2018-02-06 22:54:11 +00:00
psci_checker.c drivers: psci: remove cluster terminology and dependency on physical_package_id 2018-01-17 12:59:33 +01:00
qcom_scm-32.c remoteproc updates for v4.15 2017-11-17 20:14:10 -08:00
qcom_scm-64.c remoteproc updates for v4.15 2017-11-17 20:14:10 -08:00
qcom_scm.c firmware: qcom_scm: drop redandant of_platform_populate 2017-12-20 15:38:34 -06:00
qcom_scm.h remoteproc updates for v4.15 2017-11-17 20:14:10 -08:00
qemu_fw_cfg.c fw_cfg: write vmcoreinfo details 2018-03-20 03:17:41 +02:00
raspberrypi.c firmware: raspberrypi: print time using time64_t 2017-11-28 16:24:33 -08:00
scpi_pm_domain.c firmware: scpi: add device power domain support using genpd 2016-06-21 10:26:51 +01:00
ti_sci.c firmware: ti_sci: Use %zu for size_t print format 2017-12-16 14:41:33 -08:00
ti_sci.h firmware: ti_sci: Add support for reboot core service 2016-10-27 12:09:12 +03:00