1982 lines
51 KiB
C
1982 lines
51 KiB
C
/*
|
|
* On-Chip devices setup code for the AT91SAM9G45 family
|
|
*
|
|
* Copyright (C) 2009 Atmel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
*/
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c-gpio.h>
|
|
#include <linux/atmel-mci.h>
|
|
#include <linux/platform_data/crypto-atmel.h>
|
|
|
|
#include <linux/platform_data/at91_adc.h>
|
|
|
|
#include <linux/fb.h>
|
|
#include <video/atmel_lcdc.h>
|
|
|
|
#include <mach/at91_adc.h>
|
|
#include <mach/at91sam9g45.h>
|
|
#include <mach/at91sam9g45_matrix.h>
|
|
#include <mach/at91_matrix.h>
|
|
#include <mach/at91sam9_smc.h>
|
|
#include <linux/platform_data/dma-atmel.h>
|
|
#include <mach/atmel-mci.h>
|
|
|
|
#include <media/atmel-isi.h>
|
|
|
|
#include "board.h"
|
|
#include "generic.h"
|
|
#include "clock.h"
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* HDMAC - AHB DMA Controller
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
|
|
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct resource hdmac_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_DMA,
|
|
.end = AT91SAM9G45_BASE_DMA + SZ_512 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at_hdmac_device = {
|
|
.name = "at91sam9g45_dma",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &hdmac_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = hdmac_resources,
|
|
.num_resources = ARRAY_SIZE(hdmac_resources),
|
|
};
|
|
|
|
void __init at91_add_device_hdmac(void)
|
|
{
|
|
platform_device_register(&at_hdmac_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_hdmac(void) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* USB Host (OHCI)
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
static u64 ohci_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_usbh_data usbh_ohci_data;
|
|
|
|
static struct resource usbh_ohci_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_OHCI_BASE,
|
|
.end = AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91_usbh_ohci_device = {
|
|
.name = "at91_ohci",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &ohci_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &usbh_ohci_data,
|
|
},
|
|
.resource = usbh_ohci_resources,
|
|
.num_resources = ARRAY_SIZE(usbh_ohci_resources),
|
|
};
|
|
|
|
void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
|
|
{
|
|
int i;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
/* Enable VBus control for UHP ports */
|
|
for (i = 0; i < data->ports; i++) {
|
|
if (gpio_is_valid(data->vbus_pin[i]))
|
|
at91_set_gpio_output(data->vbus_pin[i],
|
|
data->vbus_pin_active_low[i]);
|
|
}
|
|
|
|
/* Enable overcurrent notification */
|
|
for (i = 0; i < data->ports; i++) {
|
|
if (gpio_is_valid(data->overcurrent_pin[i]))
|
|
at91_set_gpio_input(data->overcurrent_pin[i], 1);
|
|
}
|
|
|
|
usbh_ohci_data = *data;
|
|
platform_device_register(&at91_usbh_ohci_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* USB Host HS (EHCI)
|
|
* Needs an OHCI host for low and full speed management
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
|
|
static u64 ehci_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_usbh_data usbh_ehci_data;
|
|
|
|
static struct resource usbh_ehci_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_EHCI_BASE,
|
|
.end = AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91_usbh_ehci_device = {
|
|
.name = "atmel-ehci",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &ehci_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &usbh_ehci_data,
|
|
},
|
|
.resource = usbh_ehci_resources,
|
|
.num_resources = ARRAY_SIZE(usbh_ehci_resources),
|
|
};
|
|
|
|
void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
|
|
{
|
|
int i;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
/* Enable VBus control for UHP ports */
|
|
for (i = 0; i < data->ports; i++) {
|
|
if (gpio_is_valid(data->vbus_pin[i]))
|
|
at91_set_gpio_output(data->vbus_pin[i],
|
|
data->vbus_pin_active_low[i]);
|
|
}
|
|
|
|
usbh_ehci_data = *data;
|
|
platform_device_register(&at91_usbh_ehci_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* USB HS Device (Gadget)
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
|
|
static struct resource usba_udc_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_UDPHS_FIFO,
|
|
.end = AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = AT91SAM9G45_BASE_UDPHS,
|
|
.end = AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
|
|
[idx] = { \
|
|
.name = nam, \
|
|
.index = idx, \
|
|
.fifo_size = maxpkt, \
|
|
.nr_banks = maxbk, \
|
|
.can_dma = dma, \
|
|
.can_isoc = isoc, \
|
|
}
|
|
|
|
static struct usba_ep_data usba_udc_ep[] __initdata = {
|
|
EP("ep0", 0, 64, 1, 0, 0),
|
|
EP("ep1", 1, 1024, 2, 1, 1),
|
|
EP("ep2", 2, 1024, 2, 1, 1),
|
|
EP("ep3", 3, 1024, 3, 1, 0),
|
|
EP("ep4", 4, 1024, 3, 1, 0),
|
|
EP("ep5", 5, 1024, 3, 1, 1),
|
|
EP("ep6", 6, 1024, 3, 1, 1),
|
|
};
|
|
|
|
#undef EP
|
|
|
|
/*
|
|
* pdata doesn't have room for any endpoints, so we need to
|
|
* append room for the ones we need right after it.
|
|
*/
|
|
static struct {
|
|
struct usba_platform_data pdata;
|
|
struct usba_ep_data ep[7];
|
|
} usba_udc_data;
|
|
|
|
static struct platform_device at91_usba_udc_device = {
|
|
.name = "atmel_usba_udc",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &usba_udc_data.pdata,
|
|
},
|
|
.resource = usba_udc_resources,
|
|
.num_resources = ARRAY_SIZE(usba_udc_resources),
|
|
};
|
|
|
|
void __init at91_add_device_usba(struct usba_platform_data *data)
|
|
{
|
|
usba_udc_data.pdata.vbus_pin = -EINVAL;
|
|
usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
|
|
memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
|
|
|
|
if (data && gpio_is_valid(data->vbus_pin)) {
|
|
at91_set_gpio_input(data->vbus_pin, 0);
|
|
at91_set_deglitch(data->vbus_pin, 1);
|
|
usba_udc_data.pdata.vbus_pin = data->vbus_pin;
|
|
}
|
|
|
|
/* Pullup pin is handled internally by USB device peripheral */
|
|
|
|
platform_device_register(&at91_usba_udc_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_usba(struct usba_platform_data *data) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Ethernet
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
|
|
static u64 eth_dmamask = DMA_BIT_MASK(32);
|
|
static struct macb_platform_data eth_data;
|
|
|
|
static struct resource eth_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_EMAC,
|
|
.end = AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_eth_device = {
|
|
.name = "macb",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = ð_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = ð_data,
|
|
},
|
|
.resource = eth_resources,
|
|
.num_resources = ARRAY_SIZE(eth_resources),
|
|
};
|
|
|
|
void __init at91_add_device_eth(struct macb_platform_data *data)
|
|
{
|
|
if (!data)
|
|
return;
|
|
|
|
if (gpio_is_valid(data->phy_irq_pin)) {
|
|
at91_set_gpio_input(data->phy_irq_pin, 0);
|
|
at91_set_deglitch(data->phy_irq_pin, 1);
|
|
}
|
|
|
|
/* Pins used for MII and RMII */
|
|
at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */
|
|
at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */
|
|
at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
|
|
at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
|
|
at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */
|
|
at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */
|
|
at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */
|
|
at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */
|
|
at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */
|
|
at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */
|
|
|
|
if (!data->is_rmii) {
|
|
at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */
|
|
at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */
|
|
at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */
|
|
at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */
|
|
at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */
|
|
at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */
|
|
at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */
|
|
at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */
|
|
}
|
|
|
|
eth_data = *data;
|
|
platform_device_register(&at91sam9g45_eth_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_eth(struct macb_platform_data *data) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* MMC / SD
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
|
|
static u64 mmc_dmamask = DMA_BIT_MASK(32);
|
|
static struct mci_platform_data mmc0_data, mmc1_data;
|
|
|
|
static struct resource mmc0_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_MCI0,
|
|
.end = AT91SAM9G45_BASE_MCI0 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_mmc0_device = {
|
|
.name = "atmel_mci",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &mmc_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &mmc0_data,
|
|
},
|
|
.resource = mmc0_resources,
|
|
.num_resources = ARRAY_SIZE(mmc0_resources),
|
|
};
|
|
|
|
static struct resource mmc1_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_MCI1,
|
|
.end = AT91SAM9G45_BASE_MCI1 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_mmc1_device = {
|
|
.name = "atmel_mci",
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = &mmc_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &mmc1_data,
|
|
},
|
|
.resource = mmc1_resources,
|
|
.num_resources = ARRAY_SIZE(mmc1_resources),
|
|
};
|
|
|
|
/* Consider only one slot : slot 0 */
|
|
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
|
|
{
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
/* Must have at least one usable slot */
|
|
if (!data->slot[0].bus_width)
|
|
return;
|
|
|
|
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
|
|
{
|
|
struct at_dma_slave *atslave;
|
|
struct mci_dma_data *alt_atslave;
|
|
|
|
alt_atslave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
|
|
atslave = &alt_atslave->sdata;
|
|
|
|
/* DMA slave channel configuration */
|
|
atslave->dma_dev = &at_hdmac_device.dev;
|
|
atslave->cfg = ATC_FIFOCFG_HALFFIFO
|
|
| ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
|
|
if (mmc_id == 0) /* MCI0 */
|
|
atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0)
|
|
| ATC_DST_PER(AT_DMA_ID_MCI0);
|
|
|
|
else /* MCI1 */
|
|
atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI1)
|
|
| ATC_DST_PER(AT_DMA_ID_MCI1);
|
|
|
|
data->dma_slave = alt_atslave;
|
|
}
|
|
#endif
|
|
|
|
|
|
/* input/irq */
|
|
if (gpio_is_valid(data->slot[0].detect_pin)) {
|
|
at91_set_gpio_input(data->slot[0].detect_pin, 1);
|
|
at91_set_deglitch(data->slot[0].detect_pin, 1);
|
|
}
|
|
if (gpio_is_valid(data->slot[0].wp_pin))
|
|
at91_set_gpio_input(data->slot[0].wp_pin, 1);
|
|
|
|
if (mmc_id == 0) { /* MCI0 */
|
|
|
|
/* CLK */
|
|
at91_set_A_periph(AT91_PIN_PA0, 0);
|
|
|
|
/* CMD */
|
|
at91_set_A_periph(AT91_PIN_PA1, 1);
|
|
|
|
/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
|
|
at91_set_A_periph(AT91_PIN_PA2, 1);
|
|
if (data->slot[0].bus_width == 4) {
|
|
at91_set_A_periph(AT91_PIN_PA3, 1);
|
|
at91_set_A_periph(AT91_PIN_PA4, 1);
|
|
at91_set_A_periph(AT91_PIN_PA5, 1);
|
|
if (data->slot[0].bus_width == 8) {
|
|
at91_set_A_periph(AT91_PIN_PA6, 1);
|
|
at91_set_A_periph(AT91_PIN_PA7, 1);
|
|
at91_set_A_periph(AT91_PIN_PA8, 1);
|
|
at91_set_A_periph(AT91_PIN_PA9, 1);
|
|
}
|
|
}
|
|
|
|
mmc0_data = *data;
|
|
platform_device_register(&at91sam9g45_mmc0_device);
|
|
|
|
} else { /* MCI1 */
|
|
|
|
/* CLK */
|
|
at91_set_A_periph(AT91_PIN_PA31, 0);
|
|
|
|
/* CMD */
|
|
at91_set_A_periph(AT91_PIN_PA22, 1);
|
|
|
|
/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
|
|
at91_set_A_periph(AT91_PIN_PA23, 1);
|
|
if (data->slot[0].bus_width == 4) {
|
|
at91_set_A_periph(AT91_PIN_PA24, 1);
|
|
at91_set_A_periph(AT91_PIN_PA25, 1);
|
|
at91_set_A_periph(AT91_PIN_PA26, 1);
|
|
if (data->slot[0].bus_width == 8) {
|
|
at91_set_A_periph(AT91_PIN_PA27, 1);
|
|
at91_set_A_periph(AT91_PIN_PA28, 1);
|
|
at91_set_A_periph(AT91_PIN_PA29, 1);
|
|
at91_set_A_periph(AT91_PIN_PA30, 1);
|
|
}
|
|
}
|
|
|
|
mmc1_data = *data;
|
|
platform_device_register(&at91sam9g45_mmc1_device);
|
|
|
|
}
|
|
}
|
|
#else
|
|
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* NAND / SmartMedia
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
|
|
static struct atmel_nand_data nand_data;
|
|
|
|
#define NAND_BASE AT91_CHIPSELECT_3
|
|
|
|
static struct resource nand_resources[] = {
|
|
[0] = {
|
|
.start = NAND_BASE,
|
|
.end = NAND_BASE + SZ_256M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = AT91SAM9G45_BASE_ECC,
|
|
.end = AT91SAM9G45_BASE_ECC + SZ_512 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_nand_device = {
|
|
.name = "atmel_nand",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &nand_data,
|
|
},
|
|
.resource = nand_resources,
|
|
.num_resources = ARRAY_SIZE(nand_resources),
|
|
};
|
|
|
|
void __init at91_add_device_nand(struct atmel_nand_data *data)
|
|
{
|
|
unsigned long csa;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
csa = at91_matrix_read(AT91_MATRIX_EBICSA);
|
|
at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
|
|
|
|
/* enable pin */
|
|
if (gpio_is_valid(data->enable_pin))
|
|
at91_set_gpio_output(data->enable_pin, 1);
|
|
|
|
/* ready/busy pin */
|
|
if (gpio_is_valid(data->rdy_pin))
|
|
at91_set_gpio_input(data->rdy_pin, 1);
|
|
|
|
/* card detect pin */
|
|
if (gpio_is_valid(data->det_pin))
|
|
at91_set_gpio_input(data->det_pin, 1);
|
|
|
|
nand_data = *data;
|
|
platform_device_register(&at91sam9g45_nand_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_nand(struct atmel_nand_data *data) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* TWI (i2c)
|
|
* -------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Prefer the GPIO code since the TWI controller isn't robust
|
|
* (gets overruns and underruns under load) and can only issue
|
|
* repeated STARTs in one scenario (the driver doesn't yet handle them).
|
|
*/
|
|
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
|
|
static struct i2c_gpio_platform_data pdata_i2c0 = {
|
|
.sda_pin = AT91_PIN_PA20,
|
|
.sda_is_open_drain = 1,
|
|
.scl_pin = AT91_PIN_PA21,
|
|
.scl_is_open_drain = 1,
|
|
.udelay = 5, /* ~100 kHz */
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_twi0_device = {
|
|
.name = "i2c-gpio",
|
|
.id = 0,
|
|
.dev.platform_data = &pdata_i2c0,
|
|
};
|
|
|
|
static struct i2c_gpio_platform_data pdata_i2c1 = {
|
|
.sda_pin = AT91_PIN_PB10,
|
|
.sda_is_open_drain = 1,
|
|
.scl_pin = AT91_PIN_PB11,
|
|
.scl_is_open_drain = 1,
|
|
.udelay = 5, /* ~100 kHz */
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_twi1_device = {
|
|
.name = "i2c-gpio",
|
|
.id = 1,
|
|
.dev.platform_data = &pdata_i2c1,
|
|
};
|
|
|
|
void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
|
|
{
|
|
i2c_register_board_info(i2c_id, devices, nr_devices);
|
|
|
|
if (i2c_id == 0) {
|
|
at91_set_GPIO_periph(AT91_PIN_PA20, 1); /* TWD (SDA) */
|
|
at91_set_multi_drive(AT91_PIN_PA20, 1);
|
|
|
|
at91_set_GPIO_periph(AT91_PIN_PA21, 1); /* TWCK (SCL) */
|
|
at91_set_multi_drive(AT91_PIN_PA21, 1);
|
|
|
|
platform_device_register(&at91sam9g45_twi0_device);
|
|
} else {
|
|
at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* TWD (SDA) */
|
|
at91_set_multi_drive(AT91_PIN_PB10, 1);
|
|
|
|
at91_set_GPIO_periph(AT91_PIN_PB11, 1); /* TWCK (SCL) */
|
|
at91_set_multi_drive(AT91_PIN_PB11, 1);
|
|
|
|
platform_device_register(&at91sam9g45_twi1_device);
|
|
}
|
|
}
|
|
|
|
#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
|
|
static struct resource twi0_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_TWI0,
|
|
.end = AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_twi0_device = {
|
|
.name = "i2c-at91sam9g10",
|
|
.id = 0,
|
|
.resource = twi0_resources,
|
|
.num_resources = ARRAY_SIZE(twi0_resources),
|
|
};
|
|
|
|
static struct resource twi1_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_TWI1,
|
|
.end = AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_twi1_device = {
|
|
.name = "i2c-at91sam9g10",
|
|
.id = 1,
|
|
.resource = twi1_resources,
|
|
.num_resources = ARRAY_SIZE(twi1_resources),
|
|
};
|
|
|
|
void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
|
|
{
|
|
i2c_register_board_info(i2c_id, devices, nr_devices);
|
|
|
|
/* pins used for TWI interface */
|
|
if (i2c_id == 0) {
|
|
at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */
|
|
at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */
|
|
|
|
platform_device_register(&at91sam9g45_twi0_device);
|
|
} else {
|
|
at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */
|
|
at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */
|
|
|
|
platform_device_register(&at91sam9g45_twi1_device);
|
|
}
|
|
}
|
|
#else
|
|
void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* SPI
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
|
|
static u64 spi_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct resource spi0_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_SPI0,
|
|
.end = AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_spi0_device = {
|
|
.name = "atmel_spi",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &spi_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = spi0_resources,
|
|
.num_resources = ARRAY_SIZE(spi0_resources),
|
|
};
|
|
|
|
static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
|
|
|
|
static struct resource spi1_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_SPI1,
|
|
.end = AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_spi1_device = {
|
|
.name = "atmel_spi",
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = &spi_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = spi1_resources,
|
|
.num_resources = ARRAY_SIZE(spi1_resources),
|
|
};
|
|
|
|
static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
|
|
|
|
void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
|
|
{
|
|
int i;
|
|
unsigned long cs_pin;
|
|
short enable_spi0 = 0;
|
|
short enable_spi1 = 0;
|
|
|
|
/* Choose SPI chip-selects */
|
|
for (i = 0; i < nr_devices; i++) {
|
|
if (devices[i].controller_data)
|
|
cs_pin = (unsigned long) devices[i].controller_data;
|
|
else if (devices[i].bus_num == 0)
|
|
cs_pin = spi0_standard_cs[devices[i].chip_select];
|
|
else
|
|
cs_pin = spi1_standard_cs[devices[i].chip_select];
|
|
|
|
if (!gpio_is_valid(cs_pin))
|
|
continue;
|
|
|
|
if (devices[i].bus_num == 0)
|
|
enable_spi0 = 1;
|
|
else
|
|
enable_spi1 = 1;
|
|
|
|
/* enable chip-select pin */
|
|
at91_set_gpio_output(cs_pin, 1);
|
|
|
|
/* pass chip-select pin to driver */
|
|
devices[i].controller_data = (void *) cs_pin;
|
|
}
|
|
|
|
spi_register_board_info(devices, nr_devices);
|
|
|
|
/* Configure SPI bus(es) */
|
|
if (enable_spi0) {
|
|
at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */
|
|
at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */
|
|
at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */
|
|
|
|
platform_device_register(&at91sam9g45_spi0_device);
|
|
}
|
|
if (enable_spi1) {
|
|
at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_MISO */
|
|
at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */
|
|
at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */
|
|
|
|
platform_device_register(&at91sam9g45_spi1_device);
|
|
}
|
|
}
|
|
#else
|
|
void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* AC97
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
|
|
static u64 ac97_dmamask = DMA_BIT_MASK(32);
|
|
static struct ac97c_platform_data ac97_data;
|
|
|
|
static struct resource ac97_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_AC97C,
|
|
.end = AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_ac97_device = {
|
|
.name = "atmel_ac97c",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &ac97_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &ac97_data,
|
|
},
|
|
.resource = ac97_resources,
|
|
.num_resources = ARRAY_SIZE(ac97_resources),
|
|
};
|
|
|
|
void __init at91_add_device_ac97(struct ac97c_platform_data *data)
|
|
{
|
|
if (!data)
|
|
return;
|
|
|
|
at91_set_A_periph(AT91_PIN_PD8, 0); /* AC97FS */
|
|
at91_set_A_periph(AT91_PIN_PD9, 0); /* AC97CK */
|
|
at91_set_A_periph(AT91_PIN_PD7, 0); /* AC97TX */
|
|
at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */
|
|
|
|
/* reset */
|
|
if (gpio_is_valid(data->reset_pin))
|
|
at91_set_gpio_output(data->reset_pin, 0);
|
|
|
|
ac97_data = *data;
|
|
platform_device_register(&at91sam9g45_ac97_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Image Sensor Interface
|
|
* -------------------------------------------------------------------- */
|
|
#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE)
|
|
static u64 isi_dmamask = DMA_BIT_MASK(32);
|
|
static struct isi_platform_data isi_data;
|
|
|
|
struct resource isi_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_ISI,
|
|
.end = AT91SAM9G45_BASE_ISI + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_isi_device = {
|
|
.name = "atmel_isi",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &isi_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &isi_data,
|
|
},
|
|
.resource = isi_resources,
|
|
.num_resources = ARRAY_SIZE(isi_resources),
|
|
};
|
|
|
|
static struct clk_lookup isi_mck_lookups[] = {
|
|
CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL),
|
|
};
|
|
|
|
void __init at91_add_device_isi(struct isi_platform_data *data,
|
|
bool use_pck_as_mck)
|
|
{
|
|
struct clk *pck;
|
|
struct clk *parent;
|
|
|
|
if (!data)
|
|
return;
|
|
isi_data = *data;
|
|
|
|
at91_set_A_periph(AT91_PIN_PB20, 0); /* ISI_D0 */
|
|
at91_set_A_periph(AT91_PIN_PB21, 0); /* ISI_D1 */
|
|
at91_set_A_periph(AT91_PIN_PB22, 0); /* ISI_D2 */
|
|
at91_set_A_periph(AT91_PIN_PB23, 0); /* ISI_D3 */
|
|
at91_set_A_periph(AT91_PIN_PB24, 0); /* ISI_D4 */
|
|
at91_set_A_periph(AT91_PIN_PB25, 0); /* ISI_D5 */
|
|
at91_set_A_periph(AT91_PIN_PB26, 0); /* ISI_D6 */
|
|
at91_set_A_periph(AT91_PIN_PB27, 0); /* ISI_D7 */
|
|
at91_set_A_periph(AT91_PIN_PB28, 0); /* ISI_PCK */
|
|
at91_set_A_periph(AT91_PIN_PB30, 0); /* ISI_HSYNC */
|
|
at91_set_A_periph(AT91_PIN_PB29, 0); /* ISI_VSYNC */
|
|
at91_set_B_periph(AT91_PIN_PB8, 0); /* ISI_PD8 */
|
|
at91_set_B_periph(AT91_PIN_PB9, 0); /* ISI_PD9 */
|
|
at91_set_B_periph(AT91_PIN_PB10, 0); /* ISI_PD10 */
|
|
at91_set_B_periph(AT91_PIN_PB11, 0); /* ISI_PD11 */
|
|
|
|
platform_device_register(&at91sam9g45_isi_device);
|
|
|
|
if (use_pck_as_mck) {
|
|
at91_set_B_periph(AT91_PIN_PB31, 0); /* ISI_MCK (PCK1) */
|
|
|
|
pck = clk_get(NULL, "pck1");
|
|
parent = clk_get(NULL, "plla");
|
|
|
|
BUG_ON(IS_ERR(pck) || IS_ERR(parent));
|
|
|
|
if (clk_set_parent(pck, parent)) {
|
|
pr_err("Failed to set PCK's parent\n");
|
|
} else {
|
|
/* Register PCK as ISI_MCK */
|
|
isi_mck_lookups[0].clk = pck;
|
|
clkdev_add_table(isi_mck_lookups,
|
|
ARRAY_SIZE(isi_mck_lookups));
|
|
}
|
|
|
|
clk_put(pck);
|
|
clk_put(parent);
|
|
}
|
|
}
|
|
#else
|
|
void __init at91_add_device_isi(struct isi_platform_data *data,
|
|
bool use_pck_as_mck) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* LCD Controller
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
|
|
static u64 lcdc_dmamask = DMA_BIT_MASK(32);
|
|
static struct atmel_lcdfb_info lcdc_data;
|
|
|
|
static struct resource lcdc_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_LCDC_BASE,
|
|
.end = AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91_lcdc_device = {
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &lcdc_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &lcdc_data,
|
|
},
|
|
.resource = lcdc_resources,
|
|
.num_resources = ARRAY_SIZE(lcdc_resources),
|
|
};
|
|
|
|
void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
|
|
{
|
|
if (!data)
|
|
return;
|
|
|
|
if (cpu_is_at91sam9g45es())
|
|
at91_lcdc_device.name = "at91sam9g45es-lcdfb";
|
|
else
|
|
at91_lcdc_device.name = "at91sam9g45-lcdfb";
|
|
|
|
at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
|
|
|
|
at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
|
|
at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
|
|
at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */
|
|
at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */
|
|
at91_set_A_periph(AT91_PIN_PE6, 0); /* LCDDEN */
|
|
at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */
|
|
at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */
|
|
at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */
|
|
at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */
|
|
at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */
|
|
at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */
|
|
at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */
|
|
at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */
|
|
at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */
|
|
at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */
|
|
at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */
|
|
at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */
|
|
at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */
|
|
at91_set_A_periph(AT91_PIN_PE20, 0); /* LCDD13 */
|
|
at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */
|
|
at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */
|
|
at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */
|
|
at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */
|
|
at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */
|
|
at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */
|
|
at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */
|
|
at91_set_A_periph(AT91_PIN_PE28, 0); /* LCDD21 */
|
|
at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
|
|
at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
|
|
|
|
lcdc_data = *data;
|
|
platform_device_register(&at91_lcdc_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Timer/Counter block
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#ifdef CONFIG_ATMEL_TCLIB
|
|
static struct resource tcb0_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_TCB0,
|
|
.end = AT91SAM9G45_BASE_TCB0 + SZ_256 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_tcb0_device = {
|
|
.name = "atmel_tcb",
|
|
.id = 0,
|
|
.resource = tcb0_resources,
|
|
.num_resources = ARRAY_SIZE(tcb0_resources),
|
|
};
|
|
|
|
/* TCB1 begins with TC3 */
|
|
static struct resource tcb1_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_TCB1,
|
|
.end = AT91SAM9G45_BASE_TCB1 + SZ_256 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_tcb1_device = {
|
|
.name = "atmel_tcb",
|
|
.id = 1,
|
|
.resource = tcb1_resources,
|
|
.num_resources = ARRAY_SIZE(tcb1_resources),
|
|
};
|
|
|
|
static void __init at91_add_device_tc(void)
|
|
{
|
|
platform_device_register(&at91sam9g45_tcb0_device);
|
|
platform_device_register(&at91sam9g45_tcb1_device);
|
|
}
|
|
#else
|
|
static void __init at91_add_device_tc(void) { }
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* RTC
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
|
|
static struct resource rtc_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_RTC,
|
|
.end = AT91SAM9G45_BASE_RTC + SZ_256 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91_ID_SYS,
|
|
.end = NR_IRQS_LEGACY + AT91_ID_SYS,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_rtc_device = {
|
|
.name = "at91_rtc",
|
|
.id = -1,
|
|
.resource = rtc_resources,
|
|
.num_resources = ARRAY_SIZE(rtc_resources),
|
|
};
|
|
|
|
static void __init at91_add_device_rtc(void)
|
|
{
|
|
platform_device_register(&at91sam9g45_rtc_device);
|
|
}
|
|
#else
|
|
static void __init at91_add_device_rtc(void) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Touchscreen
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
|
|
static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_tsadcc_data tsadcc_data;
|
|
|
|
static struct resource tsadcc_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_TSC,
|
|
.end = AT91SAM9G45_BASE_TSC + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_tsadcc_device = {
|
|
.name = "atmel_tsadcc",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &tsadcc_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &tsadcc_data,
|
|
},
|
|
.resource = tsadcc_resources,
|
|
.num_resources = ARRAY_SIZE(tsadcc_resources),
|
|
};
|
|
|
|
void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
|
|
{
|
|
if (!data)
|
|
return;
|
|
|
|
at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */
|
|
at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */
|
|
at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */
|
|
at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */
|
|
|
|
tsadcc_data = *data;
|
|
platform_device_register(&at91sam9g45_tsadcc_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* ADC
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if IS_ENABLED(CONFIG_AT91_ADC)
|
|
static struct at91_adc_data adc_data;
|
|
|
|
static struct resource adc_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_TSC,
|
|
.end = AT91SAM9G45_BASE_TSC + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
static struct platform_device at91_adc_device = {
|
|
.name = "at91_adc",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &adc_data,
|
|
},
|
|
.resource = adc_resources,
|
|
.num_resources = ARRAY_SIZE(adc_resources),
|
|
};
|
|
|
|
static struct at91_adc_trigger at91_adc_triggers[] = {
|
|
[0] = {
|
|
.name = "external-rising",
|
|
.value = 1,
|
|
.is_external = true,
|
|
},
|
|
[1] = {
|
|
.name = "external-falling",
|
|
.value = 2,
|
|
.is_external = true,
|
|
},
|
|
[2] = {
|
|
.name = "external-any",
|
|
.value = 3,
|
|
.is_external = true,
|
|
},
|
|
[3] = {
|
|
.name = "continuous",
|
|
.value = 6,
|
|
.is_external = false,
|
|
},
|
|
};
|
|
|
|
static struct at91_adc_reg_desc at91_adc_register_g45 = {
|
|
.channel_base = AT91_ADC_CHR(0),
|
|
.drdy_mask = AT91_ADC_DRDY,
|
|
.status_register = AT91_ADC_SR,
|
|
.trigger_register = 0x08,
|
|
};
|
|
|
|
void __init at91_add_device_adc(struct at91_adc_data *data)
|
|
{
|
|
if (!data)
|
|
return;
|
|
|
|
if (test_bit(0, &data->channels_used))
|
|
at91_set_gpio_input(AT91_PIN_PD20, 0);
|
|
if (test_bit(1, &data->channels_used))
|
|
at91_set_gpio_input(AT91_PIN_PD21, 0);
|
|
if (test_bit(2, &data->channels_used))
|
|
at91_set_gpio_input(AT91_PIN_PD22, 0);
|
|
if (test_bit(3, &data->channels_used))
|
|
at91_set_gpio_input(AT91_PIN_PD23, 0);
|
|
if (test_bit(4, &data->channels_used))
|
|
at91_set_gpio_input(AT91_PIN_PD24, 0);
|
|
if (test_bit(5, &data->channels_used))
|
|
at91_set_gpio_input(AT91_PIN_PD25, 0);
|
|
if (test_bit(6, &data->channels_used))
|
|
at91_set_gpio_input(AT91_PIN_PD26, 0);
|
|
if (test_bit(7, &data->channels_used))
|
|
at91_set_gpio_input(AT91_PIN_PD27, 0);
|
|
|
|
if (data->use_external_triggers)
|
|
at91_set_A_periph(AT91_PIN_PD28, 0);
|
|
|
|
data->num_channels = 8;
|
|
data->startup_time = 40;
|
|
data->registers = &at91_adc_register_g45;
|
|
data->trigger_number = 4;
|
|
data->trigger_list = at91_adc_triggers;
|
|
|
|
adc_data = *data;
|
|
platform_device_register(&at91_adc_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_adc(struct at91_adc_data *data) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* RTT
|
|
* -------------------------------------------------------------------- */
|
|
|
|
static struct resource rtt_resources[] = {
|
|
{
|
|
.start = AT91SAM9G45_BASE_RTT,
|
|
.end = AT91SAM9G45_BASE_RTT + SZ_16 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_rtt_device = {
|
|
.name = "at91_rtt",
|
|
.id = 0,
|
|
.resource = rtt_resources,
|
|
};
|
|
|
|
#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
|
|
static void __init at91_add_device_rtt_rtc(void)
|
|
{
|
|
at91sam9g45_rtt_device.name = "rtc-at91sam9";
|
|
/*
|
|
* The second resource is needed:
|
|
* GPBR will serve as the storage for RTC time offset
|
|
*/
|
|
at91sam9g45_rtt_device.num_resources = 3;
|
|
rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
|
|
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
|
|
rtt_resources[1].end = rtt_resources[1].start + 3;
|
|
rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
|
|
rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
|
|
}
|
|
#else
|
|
static void __init at91_add_device_rtt_rtc(void)
|
|
{
|
|
/* Only one resource is needed: RTT not used as RTC */
|
|
at91sam9g45_rtt_device.num_resources = 1;
|
|
}
|
|
#endif
|
|
|
|
static void __init at91_add_device_rtt(void)
|
|
{
|
|
at91_add_device_rtt_rtc();
|
|
platform_device_register(&at91sam9g45_rtt_device);
|
|
}
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* TRNG
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_HW_RANDOM_ATMEL) || defined(CONFIG_HW_RANDOM_ATMEL_MODULE)
|
|
static struct resource trng_resources[] = {
|
|
{
|
|
.start = AT91SAM9G45_BASE_TRNG,
|
|
.end = AT91SAM9G45_BASE_TRNG + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_trng_device = {
|
|
.name = "atmel-trng",
|
|
.id = -1,
|
|
.resource = trng_resources,
|
|
.num_resources = ARRAY_SIZE(trng_resources),
|
|
};
|
|
|
|
static void __init at91_add_device_trng(void)
|
|
{
|
|
platform_device_register(&at91sam9g45_trng_device);
|
|
}
|
|
#else
|
|
static void __init at91_add_device_trng(void) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Watchdog
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
|
|
static struct resource wdt_resources[] = {
|
|
{
|
|
.start = AT91SAM9G45_BASE_WDT,
|
|
.end = AT91SAM9G45_BASE_WDT + SZ_16 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_wdt_device = {
|
|
.name = "at91_wdt",
|
|
.id = -1,
|
|
.resource = wdt_resources,
|
|
.num_resources = ARRAY_SIZE(wdt_resources),
|
|
};
|
|
|
|
static void __init at91_add_device_watchdog(void)
|
|
{
|
|
platform_device_register(&at91sam9g45_wdt_device);
|
|
}
|
|
#else
|
|
static void __init at91_add_device_watchdog(void) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* PWM
|
|
* --------------------------------------------------------------------*/
|
|
|
|
#if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE)
|
|
static u32 pwm_mask;
|
|
|
|
static struct resource pwm_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_PWMC,
|
|
.end = AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_pwm0_device = {
|
|
.name = "atmel_pwm",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &pwm_mask,
|
|
},
|
|
.resource = pwm_resources,
|
|
.num_resources = ARRAY_SIZE(pwm_resources),
|
|
};
|
|
|
|
void __init at91_add_device_pwm(u32 mask)
|
|
{
|
|
if (mask & (1 << AT91_PWM0))
|
|
at91_set_B_periph(AT91_PIN_PD24, 1); /* enable PWM0 */
|
|
|
|
if (mask & (1 << AT91_PWM1))
|
|
at91_set_B_periph(AT91_PIN_PD31, 1); /* enable PWM1 */
|
|
|
|
if (mask & (1 << AT91_PWM2))
|
|
at91_set_B_periph(AT91_PIN_PD26, 1); /* enable PWM2 */
|
|
|
|
if (mask & (1 << AT91_PWM3))
|
|
at91_set_B_periph(AT91_PIN_PD0, 1); /* enable PWM3 */
|
|
|
|
pwm_mask = mask;
|
|
|
|
platform_device_register(&at91sam9g45_pwm0_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_pwm(u32 mask) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* SSC -- Synchronous Serial Controller
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
|
|
static u64 ssc0_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct resource ssc0_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_SSC0,
|
|
.end = AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_ssc0_device = {
|
|
.name = "at91sam9g45_ssc",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &ssc0_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = ssc0_resources,
|
|
.num_resources = ARRAY_SIZE(ssc0_resources),
|
|
};
|
|
|
|
static inline void configure_ssc0_pins(unsigned pins)
|
|
{
|
|
if (pins & ATMEL_SSC_TF)
|
|
at91_set_A_periph(AT91_PIN_PD1, 1);
|
|
if (pins & ATMEL_SSC_TK)
|
|
at91_set_A_periph(AT91_PIN_PD0, 1);
|
|
if (pins & ATMEL_SSC_TD)
|
|
at91_set_A_periph(AT91_PIN_PD2, 1);
|
|
if (pins & ATMEL_SSC_RD)
|
|
at91_set_A_periph(AT91_PIN_PD3, 1);
|
|
if (pins & ATMEL_SSC_RK)
|
|
at91_set_A_periph(AT91_PIN_PD4, 1);
|
|
if (pins & ATMEL_SSC_RF)
|
|
at91_set_A_periph(AT91_PIN_PD5, 1);
|
|
}
|
|
|
|
static u64 ssc1_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct resource ssc1_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_SSC1,
|
|
.end = AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_ssc1_device = {
|
|
.name = "at91sam9g45_ssc",
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = &ssc1_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = ssc1_resources,
|
|
.num_resources = ARRAY_SIZE(ssc1_resources),
|
|
};
|
|
|
|
static inline void configure_ssc1_pins(unsigned pins)
|
|
{
|
|
if (pins & ATMEL_SSC_TF)
|
|
at91_set_A_periph(AT91_PIN_PD14, 1);
|
|
if (pins & ATMEL_SSC_TK)
|
|
at91_set_A_periph(AT91_PIN_PD12, 1);
|
|
if (pins & ATMEL_SSC_TD)
|
|
at91_set_A_periph(AT91_PIN_PD10, 1);
|
|
if (pins & ATMEL_SSC_RD)
|
|
at91_set_A_periph(AT91_PIN_PD11, 1);
|
|
if (pins & ATMEL_SSC_RK)
|
|
at91_set_A_periph(AT91_PIN_PD13, 1);
|
|
if (pins & ATMEL_SSC_RF)
|
|
at91_set_A_periph(AT91_PIN_PD15, 1);
|
|
}
|
|
|
|
/*
|
|
* SSC controllers are accessed through library code, instead of any
|
|
* kind of all-singing/all-dancing driver. For example one could be
|
|
* used by a particular I2S audio codec's driver, while another one
|
|
* on the same system might be used by a custom data capture driver.
|
|
*/
|
|
void __init at91_add_device_ssc(unsigned id, unsigned pins)
|
|
{
|
|
struct platform_device *pdev;
|
|
|
|
/*
|
|
* NOTE: caller is responsible for passing information matching
|
|
* "pins" to whatever will be using each particular controller.
|
|
*/
|
|
switch (id) {
|
|
case AT91SAM9G45_ID_SSC0:
|
|
pdev = &at91sam9g45_ssc0_device;
|
|
configure_ssc0_pins(pins);
|
|
break;
|
|
case AT91SAM9G45_ID_SSC1:
|
|
pdev = &at91sam9g45_ssc1_device;
|
|
configure_ssc1_pins(pins);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
platform_device_register(pdev);
|
|
}
|
|
|
|
#else
|
|
void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* UART
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_SERIAL_ATMEL)
|
|
static struct resource dbgu_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_DBGU,
|
|
.end = AT91SAM9G45_BASE_DBGU + SZ_512 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91_ID_SYS,
|
|
.end = NR_IRQS_LEGACY + AT91_ID_SYS,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct atmel_uart_data dbgu_data = {
|
|
.use_dma_tx = 0,
|
|
.use_dma_rx = 0,
|
|
};
|
|
|
|
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9g45_dbgu_device = {
|
|
.name = "atmel_usart",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &dbgu_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &dbgu_data,
|
|
},
|
|
.resource = dbgu_resources,
|
|
.num_resources = ARRAY_SIZE(dbgu_resources),
|
|
};
|
|
|
|
static inline void configure_dbgu_pins(void)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */
|
|
at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */
|
|
}
|
|
|
|
static struct resource uart0_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_US0,
|
|
.end = AT91SAM9G45_BASE_US0 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct atmel_uart_data uart0_data = {
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
|
|
static u64 uart0_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9g45_uart0_device = {
|
|
.name = "atmel_usart",
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = &uart0_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &uart0_data,
|
|
},
|
|
.resource = uart0_resources,
|
|
.num_resources = ARRAY_SIZE(uart0_resources),
|
|
};
|
|
|
|
static inline void configure_usart0_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */
|
|
at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_B_periph(AT91_PIN_PB17, 0); /* RTS0 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_B_periph(AT91_PIN_PB15, 0); /* CTS0 */
|
|
}
|
|
|
|
static struct resource uart1_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_US1,
|
|
.end = AT91SAM9G45_BASE_US1 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct atmel_uart_data uart1_data = {
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
|
|
static u64 uart1_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9g45_uart1_device = {
|
|
.name = "atmel_usart",
|
|
.id = 2,
|
|
.dev = {
|
|
.dma_mask = &uart1_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &uart1_data,
|
|
},
|
|
.resource = uart1_resources,
|
|
.num_resources = ARRAY_SIZE(uart1_resources),
|
|
};
|
|
|
|
static inline void configure_usart1_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */
|
|
at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_A_periph(AT91_PIN_PD16, 0); /* RTS1 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_A_periph(AT91_PIN_PD17, 0); /* CTS1 */
|
|
}
|
|
|
|
static struct resource uart2_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_US2,
|
|
.end = AT91SAM9G45_BASE_US2 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct atmel_uart_data uart2_data = {
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
|
|
static u64 uart2_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9g45_uart2_device = {
|
|
.name = "atmel_usart",
|
|
.id = 3,
|
|
.dev = {
|
|
.dma_mask = &uart2_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &uart2_data,
|
|
},
|
|
.resource = uart2_resources,
|
|
.num_resources = ARRAY_SIZE(uart2_resources),
|
|
};
|
|
|
|
static inline void configure_usart2_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD2 */
|
|
at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD2 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_B_periph(AT91_PIN_PC9, 0); /* RTS2 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_B_periph(AT91_PIN_PC11, 0); /* CTS2 */
|
|
}
|
|
|
|
static struct resource uart3_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_US3,
|
|
.end = AT91SAM9G45_BASE_US3 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct atmel_uart_data uart3_data = {
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
|
|
static u64 uart3_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9g45_uart3_device = {
|
|
.name = "atmel_usart",
|
|
.id = 4,
|
|
.dev = {
|
|
.dma_mask = &uart3_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &uart3_data,
|
|
},
|
|
.resource = uart3_resources,
|
|
.num_resources = ARRAY_SIZE(uart3_resources),
|
|
};
|
|
|
|
static inline void configure_usart3_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD3 */
|
|
at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD3 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_B_periph(AT91_PIN_PA23, 0); /* RTS3 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_B_periph(AT91_PIN_PA24, 0); /* CTS3 */
|
|
}
|
|
|
|
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
|
|
|
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
|
|
{
|
|
struct platform_device *pdev;
|
|
struct atmel_uart_data *pdata;
|
|
|
|
switch (id) {
|
|
case 0: /* DBGU */
|
|
pdev = &at91sam9g45_dbgu_device;
|
|
configure_dbgu_pins();
|
|
break;
|
|
case AT91SAM9G45_ID_US0:
|
|
pdev = &at91sam9g45_uart0_device;
|
|
configure_usart0_pins(pins);
|
|
break;
|
|
case AT91SAM9G45_ID_US1:
|
|
pdev = &at91sam9g45_uart1_device;
|
|
configure_usart1_pins(pins);
|
|
break;
|
|
case AT91SAM9G45_ID_US2:
|
|
pdev = &at91sam9g45_uart2_device;
|
|
configure_usart2_pins(pins);
|
|
break;
|
|
case AT91SAM9G45_ID_US3:
|
|
pdev = &at91sam9g45_uart3_device;
|
|
configure_usart3_pins(pins);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
pdata = pdev->dev.platform_data;
|
|
pdata->num = portnr; /* update to mapped ID */
|
|
|
|
if (portnr < ATMEL_MAX_UART)
|
|
at91_uarts[portnr] = pdev;
|
|
}
|
|
|
|
void __init at91_add_device_serial(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ATMEL_MAX_UART; i++) {
|
|
if (at91_uarts[i])
|
|
platform_device_register(at91_uarts[i]);
|
|
}
|
|
}
|
|
#else
|
|
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
|
|
void __init at91_add_device_serial(void) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* SHA1/SHA256
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_CRYPTO_DEV_ATMEL_SHA) || defined(CONFIG_CRYPTO_DEV_ATMEL_SHA_MODULE)
|
|
static struct resource sha_resources[] = {
|
|
{
|
|
.start = AT91SAM9G45_BASE_SHA,
|
|
.end = AT91SAM9G45_BASE_SHA + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_sha_device = {
|
|
.name = "atmel_sha",
|
|
.id = -1,
|
|
.resource = sha_resources,
|
|
.num_resources = ARRAY_SIZE(sha_resources),
|
|
};
|
|
|
|
static void __init at91_add_device_sha(void)
|
|
{
|
|
platform_device_register(&at91sam9g45_sha_device);
|
|
}
|
|
#else
|
|
static void __init at91_add_device_sha(void) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* DES/TDES
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_CRYPTO_DEV_ATMEL_TDES) || defined(CONFIG_CRYPTO_DEV_ATMEL_TDES_MODULE)
|
|
static struct resource tdes_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_TDES,
|
|
.end = AT91SAM9G45_BASE_TDES + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_tdes_device = {
|
|
.name = "atmel_tdes",
|
|
.id = -1,
|
|
.resource = tdes_resources,
|
|
.num_resources = ARRAY_SIZE(tdes_resources),
|
|
};
|
|
|
|
static void __init at91_add_device_tdes(void)
|
|
{
|
|
platform_device_register(&at91sam9g45_tdes_device);
|
|
}
|
|
#else
|
|
static void __init at91_add_device_tdes(void) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* AES
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE)
|
|
static struct crypto_platform_data aes_data;
|
|
static struct crypto_dma_data alt_atslave;
|
|
static u64 aes_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct resource aes_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9G45_BASE_AES,
|
|
.end = AT91SAM9G45_BASE_AES + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9g45_aes_device = {
|
|
.name = "atmel_aes",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &aes_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &aes_data,
|
|
},
|
|
.resource = aes_resources,
|
|
.num_resources = ARRAY_SIZE(aes_resources),
|
|
};
|
|
|
|
static void __init at91_add_device_aes(void)
|
|
{
|
|
struct at_dma_slave *atslave;
|
|
|
|
/* DMA TX slave channel configuration */
|
|
atslave = &alt_atslave.txdata;
|
|
atslave->dma_dev = &at_hdmac_device.dev;
|
|
atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_SRC_H2SEL_HW |
|
|
ATC_SRC_PER(AT_DMA_ID_AES_RX);
|
|
|
|
/* DMA RX slave channel configuration */
|
|
atslave = &alt_atslave.rxdata;
|
|
atslave->dma_dev = &at_hdmac_device.dev;
|
|
atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_DST_H2SEL_HW |
|
|
ATC_DST_PER(AT_DMA_ID_AES_TX);
|
|
|
|
aes_data.dma_slave = &alt_atslave;
|
|
platform_device_register(&at91sam9g45_aes_device);
|
|
}
|
|
#else
|
|
static void __init at91_add_device_aes(void) {}
|
|
#endif
|
|
|
|
/* -------------------------------------------------------------------- */
|
|
/*
|
|
* These devices are always present and don't need any board-specific
|
|
* setup.
|
|
*/
|
|
static int __init at91_add_standard_devices(void)
|
|
{
|
|
if (of_have_populated_dt())
|
|
return 0;
|
|
|
|
at91_add_device_hdmac();
|
|
at91_add_device_rtc();
|
|
at91_add_device_rtt();
|
|
at91_add_device_trng();
|
|
at91_add_device_watchdog();
|
|
at91_add_device_tc();
|
|
at91_add_device_sha();
|
|
at91_add_device_tdes();
|
|
at91_add_device_aes();
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(at91_add_standard_devices);
|