331 lines
9.4 KiB
C
331 lines
9.4 KiB
C
/****************************************************************************
|
|
* Driver for Solarflare Solarstorm network controllers and boards
|
|
* Copyright 2007-2008 Solarflare Communications Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation, incorporated herein by reference.
|
|
*/
|
|
|
|
#include "net_driver.h"
|
|
#include "phy.h"
|
|
#include "boards.h"
|
|
#include "efx.h"
|
|
#include "workarounds.h"
|
|
|
|
/* Macros for unpacking the board revision */
|
|
/* The revision info is in host byte order. */
|
|
#define BOARD_TYPE(_rev) (_rev >> 8)
|
|
#define BOARD_MAJOR(_rev) ((_rev >> 4) & 0xf)
|
|
#define BOARD_MINOR(_rev) (_rev & 0xf)
|
|
|
|
/* Blink support. If the PHY has no auto-blink mode so we hang it off a timer */
|
|
#define BLINK_INTERVAL (HZ/2)
|
|
|
|
static void blink_led_timer(unsigned long context)
|
|
{
|
|
struct efx_nic *efx = (struct efx_nic *)context;
|
|
struct efx_blinker *bl = &efx->board_info.blinker;
|
|
efx->board_info.set_id_led(efx, bl->state);
|
|
bl->state = !bl->state;
|
|
if (bl->resubmit)
|
|
mod_timer(&bl->timer, jiffies + BLINK_INTERVAL);
|
|
}
|
|
|
|
static void board_blink(struct efx_nic *efx, bool blink)
|
|
{
|
|
struct efx_blinker *blinker = &efx->board_info.blinker;
|
|
|
|
/* The rtnl mutex serialises all ethtool ioctls, so
|
|
* nothing special needs doing here. */
|
|
if (blink) {
|
|
blinker->resubmit = true;
|
|
blinker->state = false;
|
|
setup_timer(&blinker->timer, blink_led_timer,
|
|
(unsigned long)efx);
|
|
mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL);
|
|
} else {
|
|
blinker->resubmit = false;
|
|
if (blinker->timer.function)
|
|
del_timer_sync(&blinker->timer);
|
|
efx->board_info.init_leds(efx);
|
|
}
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* Support for LM87 sensor chip used on several boards
|
|
*/
|
|
#define LM87_REG_ALARMS1 0x41
|
|
#define LM87_REG_ALARMS2 0x42
|
|
#define LM87_IN_LIMITS(nr, _min, _max) \
|
|
0x2B + (nr) * 2, _max, 0x2C + (nr) * 2, _min
|
|
#define LM87_AIN_LIMITS(nr, _min, _max) \
|
|
0x3B + (nr), _max, 0x1A + (nr), _min
|
|
#define LM87_TEMP_INT_LIMITS(_min, _max) \
|
|
0x39, _max, 0x3A, _min
|
|
#define LM87_TEMP_EXT1_LIMITS(_min, _max) \
|
|
0x37, _max, 0x38, _min
|
|
|
|
#define LM87_ALARM_TEMP_INT 0x10
|
|
#define LM87_ALARM_TEMP_EXT1 0x20
|
|
|
|
#if defined(CONFIG_SENSORS_LM87) || defined(CONFIG_SENSORS_LM87_MODULE)
|
|
|
|
static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
|
|
const u8 *reg_values)
|
|
{
|
|
struct i2c_client *client = i2c_new_device(&efx->i2c_adap, info);
|
|
int rc;
|
|
|
|
if (!client)
|
|
return -EIO;
|
|
|
|
while (*reg_values) {
|
|
u8 reg = *reg_values++;
|
|
u8 value = *reg_values++;
|
|
rc = i2c_smbus_write_byte_data(client, reg, value);
|
|
if (rc)
|
|
goto err;
|
|
}
|
|
|
|
efx->board_info.hwmon_client = client;
|
|
return 0;
|
|
|
|
err:
|
|
i2c_unregister_device(client);
|
|
return rc;
|
|
}
|
|
|
|
static void efx_fini_lm87(struct efx_nic *efx)
|
|
{
|
|
i2c_unregister_device(efx->board_info.hwmon_client);
|
|
}
|
|
|
|
static int efx_check_lm87(struct efx_nic *efx, unsigned mask)
|
|
{
|
|
struct i2c_client *client = efx->board_info.hwmon_client;
|
|
s32 alarms1, alarms2;
|
|
|
|
/* If link is up then do not monitor temperature */
|
|
if (EFX_WORKAROUND_7884(efx) && efx->link_up)
|
|
return 0;
|
|
|
|
alarms1 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
|
|
alarms2 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);
|
|
if (alarms1 < 0)
|
|
return alarms1;
|
|
if (alarms2 < 0)
|
|
return alarms2;
|
|
alarms1 &= mask;
|
|
alarms2 &= mask >> 8;
|
|
if (alarms1 || alarms2) {
|
|
EFX_ERR(efx,
|
|
"LM87 detected a hardware failure (status %02x:%02x)"
|
|
"%s%s\n",
|
|
alarms1, alarms2,
|
|
(alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "",
|
|
(alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : "");
|
|
return -ERANGE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else /* !CONFIG_SENSORS_LM87 */
|
|
|
|
static inline int
|
|
efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
|
|
const u8 *reg_values)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline void efx_fini_lm87(struct efx_nic *efx)
|
|
{
|
|
}
|
|
static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_SENSORS_LM87 */
|
|
|
|
/*****************************************************************************
|
|
* Support for the SFE4002
|
|
*
|
|
*/
|
|
static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */
|
|
|
|
static const u8 sfe4002_lm87_regs[] = {
|
|
LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */
|
|
LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */
|
|
LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */
|
|
LM87_IN_LIMITS(3, 0xb0, 0xc9), /* 5V: 4.6-5.2V */
|
|
LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */
|
|
LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */
|
|
LM87_AIN_LIMITS(0, 0xa0, 0xb2), /* AIN1: 1.66V +/- 5% */
|
|
LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */
|
|
LM87_TEMP_INT_LIMITS(10, 60), /* board */
|
|
LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */
|
|
0
|
|
};
|
|
|
|
static struct i2c_board_info sfe4002_hwmon_info = {
|
|
I2C_BOARD_INFO("lm87", 0x2e),
|
|
.platform_data = &sfe4002_lm87_channel,
|
|
.irq = -1,
|
|
};
|
|
|
|
/****************************************************************************/
|
|
/* LED allocations. Note that on rev A0 boards the schematic and the reality
|
|
* differ: red and green are swapped. Below is the fixed (A1) layout (there
|
|
* are only 3 A0 boards in existence, so no real reason to make this
|
|
* conditional).
|
|
*/
|
|
#define SFE4002_FAULT_LED (2) /* Red */
|
|
#define SFE4002_RX_LED (0) /* Green */
|
|
#define SFE4002_TX_LED (1) /* Amber */
|
|
|
|
static void sfe4002_init_leds(struct efx_nic *efx)
|
|
{
|
|
/* Set the TX and RX LEDs to reflect status and activity, and the
|
|
* fault LED off */
|
|
xfp_set_led(efx, SFE4002_TX_LED,
|
|
QUAKE_LED_TXLINK | QUAKE_LED_LINK_ACTSTAT);
|
|
xfp_set_led(efx, SFE4002_RX_LED,
|
|
QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT);
|
|
xfp_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF);
|
|
}
|
|
|
|
static void sfe4002_set_id_led(struct efx_nic *efx, bool state)
|
|
{
|
|
xfp_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON :
|
|
QUAKE_LED_OFF);
|
|
}
|
|
|
|
static int sfe4002_check_hw(struct efx_nic *efx)
|
|
{
|
|
/* A0 board rev. 4002s report a temperature fault the whole time
|
|
* (bad sensor) so we mask it out. */
|
|
unsigned alarm_mask =
|
|
(efx->board_info.major == 0 && efx->board_info.minor == 0) ?
|
|
~LM87_ALARM_TEMP_EXT1 : ~0;
|
|
|
|
return efx_check_lm87(efx, alarm_mask);
|
|
}
|
|
|
|
static int sfe4002_init(struct efx_nic *efx)
|
|
{
|
|
int rc = efx_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs);
|
|
if (rc)
|
|
return rc;
|
|
efx->board_info.monitor = sfe4002_check_hw;
|
|
efx->board_info.init_leds = sfe4002_init_leds;
|
|
efx->board_info.set_id_led = sfe4002_set_id_led;
|
|
efx->board_info.blink = board_blink;
|
|
efx->board_info.fini = efx_fini_lm87;
|
|
return 0;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* Support for the SFN4112F
|
|
*
|
|
*/
|
|
static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */
|
|
|
|
static const u8 sfn4112f_lm87_regs[] = {
|
|
LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */
|
|
LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */
|
|
LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */
|
|
LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */
|
|
LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */
|
|
LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */
|
|
LM87_TEMP_INT_LIMITS(10, 60), /* board */
|
|
LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */
|
|
0
|
|
};
|
|
|
|
static struct i2c_board_info sfn4112f_hwmon_info = {
|
|
I2C_BOARD_INFO("lm87", 0x2e),
|
|
.platform_data = &sfn4112f_lm87_channel,
|
|
.irq = -1,
|
|
};
|
|
|
|
#define SFN4112F_ACT_LED 0
|
|
#define SFN4112F_LINK_LED 1
|
|
|
|
static void sfn4112f_init_leds(struct efx_nic *efx)
|
|
{
|
|
xfp_set_led(efx, SFN4112F_ACT_LED,
|
|
QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACT);
|
|
xfp_set_led(efx, SFN4112F_LINK_LED,
|
|
QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT);
|
|
}
|
|
|
|
static void sfn4112f_set_id_led(struct efx_nic *efx, bool state)
|
|
{
|
|
xfp_set_led(efx, SFN4112F_LINK_LED,
|
|
state ? QUAKE_LED_ON : QUAKE_LED_OFF);
|
|
}
|
|
|
|
static int sfn4112f_check_hw(struct efx_nic *efx)
|
|
{
|
|
/* Mask out unused sensors */
|
|
return efx_check_lm87(efx, ~0x48);
|
|
}
|
|
|
|
static int sfn4112f_init(struct efx_nic *efx)
|
|
{
|
|
int rc = efx_init_lm87(efx, &sfn4112f_hwmon_info, sfn4112f_lm87_regs);
|
|
if (rc)
|
|
return rc;
|
|
efx->board_info.monitor = sfn4112f_check_hw;
|
|
efx->board_info.init_leds = sfn4112f_init_leds;
|
|
efx->board_info.set_id_led = sfn4112f_set_id_led;
|
|
efx->board_info.blink = board_blink;
|
|
efx->board_info.fini = efx_fini_lm87;
|
|
return 0;
|
|
}
|
|
|
|
/* This will get expanded as board-specific details get moved out of the
|
|
* PHY drivers. */
|
|
struct efx_board_data {
|
|
enum efx_board_type type;
|
|
const char *ref_model;
|
|
const char *gen_type;
|
|
int (*init) (struct efx_nic *nic);
|
|
};
|
|
|
|
|
|
static struct efx_board_data board_data[] = {
|
|
{ EFX_BOARD_SFE4001, "SFE4001", "10GBASE-T adapter", sfe4001_init },
|
|
{ EFX_BOARD_SFE4002, "SFE4002", "XFP adapter", sfe4002_init },
|
|
{ EFX_BOARD_SFN4111T, "SFN4111T", "100/1000/10GBASE-T adapter",
|
|
sfn4111t_init },
|
|
{ EFX_BOARD_SFN4112F, "SFN4112F", "SFP+ adapter",
|
|
sfn4112f_init },
|
|
};
|
|
|
|
void efx_set_board_info(struct efx_nic *efx, u16 revision_info)
|
|
{
|
|
struct efx_board_data *data = NULL;
|
|
int i;
|
|
|
|
efx->board_info.type = BOARD_TYPE(revision_info);
|
|
efx->board_info.major = BOARD_MAJOR(revision_info);
|
|
efx->board_info.minor = BOARD_MINOR(revision_info);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(board_data); i++)
|
|
if (board_data[i].type == efx->board_info.type)
|
|
data = &board_data[i];
|
|
|
|
if (data) {
|
|
EFX_INFO(efx, "board is %s rev %c%d\n",
|
|
(efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
|
|
? data->ref_model : data->gen_type,
|
|
'A' + efx->board_info.major, efx->board_info.minor);
|
|
efx->board_info.init = data->init;
|
|
} else {
|
|
EFX_ERR(efx, "unknown board type %d\n", efx->board_info.type);
|
|
}
|
|
}
|