linux_old1/drivers/tty/serial
Tony Lindgren 4e0f5cc650 serial: 8250_omap: Fix probe and remove for PM runtime
Otherwise the interconnect related code implementing PM runtime will
produce these errors on a failed probe:

omap_uart 48066000.serial: omap_device: omap_device_enable() called from invalid state 1
omap_uart 48066000.serial: use pm_runtime_put_sync_suspend() in driver?

Note that we now also need to check for priv in omap8250_runtime_suspend()
as it has not yet been registered if probe fails. And we need to use
pm_runtime_put_sync() to properly idle the device like we already do
in omap8250_remove().

Fixes: 61929cf016 ("tty: serial: Add 8250-core based omap driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:08:30 +01:00
..
8250 serial: 8250_omap: Fix probe and remove for PM runtime 2017-01-25 11:08:30 +01:00
cpm_uart tty: serial: cpm_uart: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
jsm tty: serial: jsm_tty: constify uart_ops structures 2016-09-02 15:01:16 +02:00
21285.c
Kconfig tty: serial: lantiq: implement earlycon support 2017-01-12 11:51:24 +01:00
Makefile tty: serial: Makefile: move kgdb to be initialized last 2016-10-27 16:27:24 +02:00
altera_jtaguart.c serial: altera: constify uart_ops structures 2016-09-02 15:01:16 +02:00
altera_uart.c serial: altera: constify uart_ops structures 2016-09-02 15:01:16 +02:00
amba-pl010.c
amba-pl011.c serial: pl011: Mark console as CON_ANYTIME 2017-01-19 14:20:23 +01:00
amba-pl011.h tty: amba-pl011: clean up LCR register offsets 2015-12-13 19:59:48 -08:00
apbuart.c tty: serial: apbuart: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
apbuart.h
ar933x_uart.c tree-wide: replace config_enabled() with IS_ENABLED() 2016-08-04 08:50:07 -04:00
arc_uart.c serial/arc: constify uart_ops structures 2016-09-01 21:05:41 +02:00
atmel_serial.c tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done 2017-01-11 08:18:45 +01:00
bcm63xx_uart.c serial/bcm63xx_uart: constify uart_ops structures 2016-09-02 15:01:16 +02:00
bfin_sport_uart.c tty: serial: constify dev_pm_ops structures 2017-01-19 14:20:23 +01:00
bfin_sport_uart.h
bfin_uart.c serial:bfin-uart:Remove 'struct timeval' 2015-12-13 19:59:48 -08:00
clps711x.c serial: clps711x: Changing the compatibility string to match with the smallest supported chip 2016-07-06 17:38:16 +02:00
crisv10.c serial: crisv10: fix invalid user-pointer check 2016-11-10 14:41:25 +01:00
crisv10.h
digicolor-usart.c tty/serial: digicolor: Fix bad usage of IS_ERR_VALUE 2016-02-14 17:39:36 -08:00
dz.c
dz.h
earlycon-arm-semihost.c tty/serial: mark __init early_smh_setup() static 2016-09-02 15:03:35 +02:00
earlycon.c ACPI: parse SPCR and enable matching console 2016-09-28 17:46:46 +02:00
efm32-uart.c
etraxfs-uart.c serial: etraxfs-uart: Fix crash 2015-11-20 16:19:54 -08:00
fsl_lpuart.c tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock 2017-01-12 11:51:24 +01:00
icom.c Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
icom.h
ifx6x60.c serial: ifx6x60: Free memory when probe fails 2016-11-10 14:50:46 +01:00
ifx6x60.h
imx.c serial: imx: Allow passing 'rst-gpios' for rs485 mode 2017-01-12 11:51:25 +01:00
ioc3_serial.c
ioc4_serial.c serial: ioc4_serial: Free memory when kzalloc fails during probe 2016-11-10 14:50:46 +01:00
ip22zilog.c
ip22zilog.h
kgdb_nmi.c
kgdboc.c
lantiq.c tty: update my email address 2017-01-12 11:51:24 +01:00
lpc32xx_hs.c tty: serial: lpc32xx_hs: fix handling platform_get_irq result 2015-10-04 19:09:21 +01:00
m32r_sio.c serial: m32r_sio: make it explicitly non-modular 2016-06-25 14:00:06 -07:00
m32r_sio_reg.h
max310x.c serial: max310x: Add support for newer silicon revisions 2017-01-12 11:51:24 +01:00
max3100.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
mcf.c
men_z135_uart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
meson_uart.c tty: serial: meson: allow baud-rates higher than 115200 2017-01-19 14:38:57 +01:00
mpc52xx_uart.c tty: serial: constify psc_ops structs 2016-02-06 22:31:47 -08:00
mps2-uart.c serial: mps2-uart: make driver explicitly non-modular 2016-06-25 14:01:57 -07:00
mpsc.c TTY: serial/mpsc, remove unused fields 2016-02-06 22:16:21 -08:00
msm_serial.c tty: serial: msm: Fix module autoload 2017-01-12 11:51:25 +01:00
mux.c parisc: serial/mux: Convert to uart_console_device instead of open-coded 2015-10-22 15:44:28 +02:00
mvebu-uart.c serial: mvebu-uart: free the IRQ in ->shutdown() 2016-06-25 14:00:06 -07:00
mxs-auart.c serial: mxs-auart: support CMSPAR termios cflag 2017-01-12 11:51:24 +01:00
netx-serial.c
omap-serial.c serial: omap: Add omapserial earlycon 2017-01-19 14:20:23 +01:00
pch_uart.c serial: pch_uart: add terminate entry for dmi_system_id tables 2016-10-27 16:01:31 +02:00
pic32_uart.c serial: pic32_uart: Fix 'request_irq' and 'free_irq' inconsistancy 2017-01-12 11:51:24 +01:00
pic32_uart.h serial: pic32_uart: Add PIC32 UART driver 2016-05-13 14:01:56 +02:00
pmac_zilog.c TTY: serial, handle platform_get_irq retval properly 2016-06-25 09:01:52 -07:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c serial: pxa2xx: remove __deprecated annotation 2016-11-10 14:50:45 +01:00
rp2.c
sa1100.c
samsung.c serial: samsung: Simplify DMA engine initialization code 2017-01-12 11:51:24 +01:00
samsung.h serial: samsung: Simplify DMA engine initialization code 2017-01-12 11:51:24 +01:00
sb1250-duart.c
sc16is7xx.c Merge 4.9-rc3 into tty-next 2016-10-30 06:42:10 -04:00
sccnxp.c
serial-tegra.c TTY: serial, handle platform_get_irq retval properly 2016-06-25 09:01:52 -07:00
serial_core.c Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
serial_ks8695.c serial: Fix ASYNC_* => UPF_* flags misuse 2016-01-28 14:17:42 -08:00
serial_mctrl_gpio.c serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct 2016-06-25 14:30:42 -07:00
serial_mctrl_gpio.h serial: mctrl_gpio: add modem control read routine 2016-06-25 14:30:42 -07:00
serial_txx9.c
sh-sci.c serial: sh-sci: Compute the regshift value for SCI ports 2017-01-19 14:17:05 +01:00
sh-sci.h serial: sh-sci: Extend sci_port_params with more port parameters 2017-01-19 14:17:05 +01:00
sirfsoc_uart.c serial: sirf: Use generic uart-has-rtscts DT property 2016-04-30 09:26:55 -07:00
sirfsoc_uart.h serial: sirf: make fifo functions static 2016-06-25 14:01:57 -07:00
sn_console.c drivers/tty: make serial/sn_console.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sprd_serial.c remove lots of IS_ERR_VALUE abuses 2016-05-27 15:26:11 -07:00
st-asc.c serial: st-asc: constify uart_ops structures 2016-09-02 15:01:16 +02:00
stm32-usart.c serial: stm32: mark symbols static where possible 2016-09-27 12:55:27 +02:00
stm32-usart.h serial: stm32: Fix comparisons with undefined register 2016-10-27 16:00:31 +02:00
suncore.c drivers/tty: make serial/suncore.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sunhv.c serial: sunhv: Free memory when remove() is called 2016-11-16 10:57:25 +01:00
sunsab.c
sunsab.h
sunsu.c serial: sunsu: Free memory when probe fails 2016-11-16 10:57:26 +01:00
sunzilog.c
sunzilog.h
tilegx.c
timbuart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
timbuart.h
uartlite.c serial-uartlite: constify uart_ops structures 2016-09-02 15:01:16 +02:00
ucc_uart.c QE-UART: add "fsl,t1040-ucc-uart" to of_device_id 2016-05-01 13:55:12 -07:00
vr41xx_siu.c
vt8500_serial.c serial: vt8500_serial: Fix a parameter of find_first_zero_bit. 2016-08-31 15:42:28 +02:00
xilinx_uartps.c serial: xuartps: Enable uart loopback mode 2017-01-25 11:08:30 +01:00
zs.c serial: zs: Fix a transmit lockup in console output 2016-02-06 23:13:30 -08:00
zs.h