372 lines
9.2 KiB
C
372 lines
9.2 KiB
C
/*
|
|
* AMD CS5535/CS5536 GPIO driver
|
|
* Copyright (C) 2006 Advanced Micro Devices, Inc.
|
|
* Copyright (C) 2007-2009 Andres Salomon <dilinger@collabora.co.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of version 2 of the GNU General Public License
|
|
* as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/io.h>
|
|
#include <linux/cs5535.h>
|
|
#include <asm/msr.h>
|
|
|
|
#define DRV_NAME "cs5535-gpio"
|
|
|
|
/*
|
|
* Some GPIO pins
|
|
* 31-29,23 : reserved (always mask out)
|
|
* 28 : Power Button
|
|
* 26 : PME#
|
|
* 22-16 : LPC
|
|
* 14,15 : SMBus
|
|
* 9,8 : UART1
|
|
* 7 : PCI INTB
|
|
* 3,4 : UART2/DDC
|
|
* 2 : IDE_IRQ0
|
|
* 1 : AC_BEEP
|
|
* 0 : PCI INTA
|
|
*
|
|
* If a mask was not specified, allow all except
|
|
* reserved and Power Button
|
|
*/
|
|
#define GPIO_DEFAULT_MASK 0x0F7FFFFF
|
|
|
|
static ulong mask = GPIO_DEFAULT_MASK;
|
|
module_param_named(mask, mask, ulong, 0444);
|
|
MODULE_PARM_DESC(mask, "GPIO channel mask.");
|
|
|
|
/*
|
|
* FIXME: convert this singleton driver to use the state container
|
|
* design pattern, see Documentation/driver-model/design-patterns.txt
|
|
*/
|
|
static struct cs5535_gpio_chip {
|
|
struct gpio_chip chip;
|
|
resource_size_t base;
|
|
|
|
struct platform_device *pdev;
|
|
spinlock_t lock;
|
|
} cs5535_gpio_chip;
|
|
|
|
/*
|
|
* The CS5535/CS5536 GPIOs support a number of extra features not defined
|
|
* by the gpio_chip API, so these are exported. For a full list of the
|
|
* registers, see include/linux/cs5535.h.
|
|
*/
|
|
|
|
static void errata_outl(struct cs5535_gpio_chip *chip, u32 val,
|
|
unsigned int reg)
|
|
{
|
|
unsigned long addr = chip->base + 0x80 + reg;
|
|
|
|
/*
|
|
* According to the CS5536 errata (#36), after suspend
|
|
* a write to the high bank GPIO register will clear all
|
|
* non-selected bits; the recommended workaround is a
|
|
* read-modify-write operation.
|
|
*
|
|
* Don't apply this errata to the edge status GPIOs, as writing
|
|
* to their lower bits will clear them.
|
|
*/
|
|
if (reg != GPIO_POSITIVE_EDGE_STS && reg != GPIO_NEGATIVE_EDGE_STS) {
|
|
if (val & 0xffff)
|
|
val |= (inl(addr) & 0xffff); /* ignore the high bits */
|
|
else
|
|
val |= (inl(addr) ^ (val >> 16));
|
|
}
|
|
outl(val, addr);
|
|
}
|
|
|
|
static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
|
|
unsigned int reg)
|
|
{
|
|
if (offset < 16)
|
|
/* low bank register */
|
|
outl(1 << offset, chip->base + reg);
|
|
else
|
|
/* high bank register */
|
|
errata_outl(chip, 1 << (offset - 16), reg);
|
|
}
|
|
|
|
void cs5535_gpio_set(unsigned offset, unsigned int reg)
|
|
{
|
|
struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
__cs5535_gpio_set(chip, offset, reg);
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cs5535_gpio_set);
|
|
|
|
static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset,
|
|
unsigned int reg)
|
|
{
|
|
if (offset < 16)
|
|
/* low bank register */
|
|
outl(1 << (offset + 16), chip->base + reg);
|
|
else
|
|
/* high bank register */
|
|
errata_outl(chip, 1 << offset, reg);
|
|
}
|
|
|
|
void cs5535_gpio_clear(unsigned offset, unsigned int reg)
|
|
{
|
|
struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
__cs5535_gpio_clear(chip, offset, reg);
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cs5535_gpio_clear);
|
|
|
|
int cs5535_gpio_isset(unsigned offset, unsigned int reg)
|
|
{
|
|
struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
|
|
unsigned long flags;
|
|
long val;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
if (offset < 16)
|
|
/* low bank register */
|
|
val = inl(chip->base + reg);
|
|
else {
|
|
/* high bank register */
|
|
val = inl(chip->base + 0x80 + reg);
|
|
offset -= 16;
|
|
}
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
return (val & (1 << offset)) ? 1 : 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cs5535_gpio_isset);
|
|
|
|
int cs5535_gpio_set_irq(unsigned group, unsigned irq)
|
|
{
|
|
uint32_t lo, hi;
|
|
|
|
if (group > 7 || irq > 15)
|
|
return -EINVAL;
|
|
|
|
rdmsr(MSR_PIC_ZSEL_HIGH, lo, hi);
|
|
|
|
lo &= ~(0xF << (group * 4));
|
|
lo |= (irq & 0xF) << (group * 4);
|
|
|
|
wrmsr(MSR_PIC_ZSEL_HIGH, lo, hi);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cs5535_gpio_set_irq);
|
|
|
|
void cs5535_gpio_setup_event(unsigned offset, int pair, int pme)
|
|
{
|
|
struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
|
|
uint32_t shift = (offset % 8) * 4;
|
|
unsigned long flags;
|
|
uint32_t val;
|
|
|
|
if (offset >= 24)
|
|
offset = GPIO_MAP_W;
|
|
else if (offset >= 16)
|
|
offset = GPIO_MAP_Z;
|
|
else if (offset >= 8)
|
|
offset = GPIO_MAP_Y;
|
|
else
|
|
offset = GPIO_MAP_X;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
val = inl(chip->base + offset);
|
|
|
|
/* Clear whatever was there before */
|
|
val &= ~(0xF << shift);
|
|
|
|
/* Set the new value */
|
|
val |= ((pair & 7) << shift);
|
|
|
|
/* Set the PME bit if this is a PME event */
|
|
if (pme)
|
|
val |= (1 << (shift + 3));
|
|
|
|
outl(val, chip->base + offset);
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cs5535_gpio_setup_event);
|
|
|
|
/*
|
|
* Generic gpio_chip API support.
|
|
*/
|
|
|
|
static int chip_gpio_request(struct gpio_chip *c, unsigned offset)
|
|
{
|
|
struct cs5535_gpio_chip *chip = gpiochip_get_data(c);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
|
|
/* check if this pin is available */
|
|
if ((mask & (1 << offset)) == 0) {
|
|
dev_info(&chip->pdev->dev,
|
|
"pin %u is not available (check mask)\n", offset);
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* disable output aux 1 & 2 on this pin */
|
|
__cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_AUX1);
|
|
__cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_AUX2);
|
|
|
|
/* disable input aux 1 on this pin */
|
|
__cs5535_gpio_clear(chip, offset, GPIO_INPUT_AUX1);
|
|
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int chip_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
return cs5535_gpio_isset(offset, GPIO_READ_BACK);
|
|
}
|
|
|
|
static void chip_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
|
|
{
|
|
if (val)
|
|
cs5535_gpio_set(offset, GPIO_OUTPUT_VAL);
|
|
else
|
|
cs5535_gpio_clear(offset, GPIO_OUTPUT_VAL);
|
|
}
|
|
|
|
static int chip_direction_input(struct gpio_chip *c, unsigned offset)
|
|
{
|
|
struct cs5535_gpio_chip *chip = gpiochip_get_data(c);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
__cs5535_gpio_set(chip, offset, GPIO_INPUT_ENABLE);
|
|
__cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_ENABLE);
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int chip_direction_output(struct gpio_chip *c, unsigned offset, int val)
|
|
{
|
|
struct cs5535_gpio_chip *chip = gpiochip_get_data(c);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
|
|
__cs5535_gpio_set(chip, offset, GPIO_INPUT_ENABLE);
|
|
__cs5535_gpio_set(chip, offset, GPIO_OUTPUT_ENABLE);
|
|
if (val)
|
|
__cs5535_gpio_set(chip, offset, GPIO_OUTPUT_VAL);
|
|
else
|
|
__cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_VAL);
|
|
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char * const cs5535_gpio_names[] = {
|
|
"GPIO0", "GPIO1", "GPIO2", "GPIO3",
|
|
"GPIO4", "GPIO5", "GPIO6", "GPIO7",
|
|
"GPIO8", "GPIO9", "GPIO10", "GPIO11",
|
|
"GPIO12", "GPIO13", "GPIO14", "GPIO15",
|
|
"GPIO16", "GPIO17", "GPIO18", "GPIO19",
|
|
"GPIO20", "GPIO21", "GPIO22", NULL,
|
|
"GPIO24", "GPIO25", "GPIO26", "GPIO27",
|
|
"GPIO28", NULL, NULL, NULL,
|
|
};
|
|
|
|
static struct cs5535_gpio_chip cs5535_gpio_chip = {
|
|
.chip = {
|
|
.owner = THIS_MODULE,
|
|
.label = DRV_NAME,
|
|
|
|
.base = 0,
|
|
.ngpio = 32,
|
|
.names = cs5535_gpio_names,
|
|
.request = chip_gpio_request,
|
|
|
|
.get = chip_gpio_get,
|
|
.set = chip_gpio_set,
|
|
|
|
.direction_input = chip_direction_input,
|
|
.direction_output = chip_direction_output,
|
|
},
|
|
};
|
|
|
|
static int cs5535_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
int err = -EIO;
|
|
ulong mask_orig = mask;
|
|
|
|
/* There are two ways to get the GPIO base address; one is by
|
|
* fetching it from MSR_LBAR_GPIO, the other is by reading the
|
|
* PCI BAR info. The latter method is easier (especially across
|
|
* different architectures), so we'll stick with that for now. If
|
|
* it turns out to be unreliable in the face of crappy BIOSes, we
|
|
* can always go back to using MSRs.. */
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "can't fetch device resource info\n");
|
|
return err;
|
|
}
|
|
|
|
if (!devm_request_region(&pdev->dev, res->start, resource_size(res),
|
|
pdev->name)) {
|
|
dev_err(&pdev->dev, "can't request region\n");
|
|
return err;
|
|
}
|
|
|
|
/* set up the driver-specific struct */
|
|
cs5535_gpio_chip.base = res->start;
|
|
cs5535_gpio_chip.pdev = pdev;
|
|
spin_lock_init(&cs5535_gpio_chip.lock);
|
|
|
|
dev_info(&pdev->dev, "reserved resource region %pR\n", res);
|
|
|
|
/* mask out reserved pins */
|
|
mask &= 0x1F7FFFFF;
|
|
|
|
/* do not allow pin 28, Power Button, as there's special handling
|
|
* in the PMC needed. (note 12, p. 48) */
|
|
mask &= ~(1 << 28);
|
|
|
|
if (mask_orig != mask)
|
|
dev_info(&pdev->dev, "mask changed from 0x%08lX to 0x%08lX\n",
|
|
mask_orig, mask);
|
|
|
|
/* finally, register with the generic GPIO API */
|
|
err = devm_gpiochip_add_data(&pdev->dev, &cs5535_gpio_chip.chip,
|
|
&cs5535_gpio_chip);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver cs5535_gpio_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
},
|
|
.probe = cs5535_gpio_probe,
|
|
};
|
|
|
|
module_platform_driver(cs5535_gpio_driver);
|
|
|
|
MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
|
|
MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:" DRV_NAME);
|