30 lines
1.0 KiB
Plaintext
30 lines
1.0 KiB
Plaintext
ROM-able zImage boot from MMC
|
|
-----------------------------
|
|
|
|
An ROM-able zImage compiled with ZBOOT_ROM_MMCIF may be written to MMC and
|
|
SuperH Mobile ARM will to boot directly from the MMCIF hardware block.
|
|
|
|
This is achieved by the mask ROM loading the first portion of the image into
|
|
MERAM and then jumping to it. This portion contains loader code which
|
|
copies the entire image to SDRAM and jumps to it. From there the zImage
|
|
boot code proceeds as normal, uncompressing the image into its final
|
|
location and then jumping to it.
|
|
|
|
This code has been tested on an AP4EB board using the developer 1A eMMC
|
|
boot mode which is configured using the following jumper settings.
|
|
The board used for testing required a patched mask ROM in order for
|
|
this mode to function.
|
|
|
|
8 7 6 5 4 3 2 1
|
|
x|x|x|x|x| |x|
|
|
S4 -+-+-+-+-+-+-+-
|
|
| | | | |x| |x on
|
|
|
|
The zImage must be written to the MMC card at sector 1 (512 bytes) in
|
|
vrl4 format. A utility vrl4 is supplied to accomplish this.
|
|
|
|
e.g.
|
|
vrl4 < zImage | dd of=/dev/sdX bs=512 seek=1
|
|
|
|
A dual-voltage MMC 4.0 card was used for testing.
|