linux_old1/drivers/usb
Anatolij Gustschin 230f7ede6c USB: add USB EHCI support for MPC5121 SoC
Extends FSL EHCI platform driver glue layer to support
MPC5121 USB controllers. MPC5121 Rev 2.0 silicon EHCI
registers are in big endian format. The appropriate flags
are set using the information in the platform data structure.
MPC83xx system interface registers are not available on
MPC512x, so the access to these registers is isolated in
MPC512x case. Furthermore the USB controller clocks
must be enabled before 512x register accesses which is
done by providing platform specific init callback.

The MPC512x internal USB PHY doesn't provide supply voltage.
For boards using different power switches allow specifying
DRVVBUS and PWR_FAULT signal polarity of the MPC5121 internal
PHY using "fsl,invert-drvvbus" and "fsl,invert-pwr-fault"
properties in the device tree USB nodes. Adds documentation
for this new device tree bindings.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:21:58 -07:00
..
atm usb: change to new flag variable 2010-10-22 10:21:56 -07:00
c67x00 USB: convert usb_hcd bitfields into atomic flags 2010-08-10 14:35:37 -07:00
class USB: cdc-acm: fix code indentation 2010-10-22 10:21:57 -07:00
core usb: change to new flag variable 2010-10-22 10:21:56 -07:00
early echi-dbgp: Add kernel debugger support for the usb debug port 2010-05-20 21:04:31 -05:00
gadget USB: add platform glue driver for FSL USB DR controller 2010-10-22 10:21:58 -07:00
host USB: add USB EHCI support for MPC5121 SoC 2010-10-22 10:21:58 -07:00
image USB: BKL removal: mdc800 2010-03-02 14:54:27 -08:00
misc usb: change to new flag variable 2010-10-22 10:21:56 -07:00
mon USB: resizing usbmon binary interface buffer causes protection faults 2010-08-10 14:35:41 -07:00
musb usb: change to new flag variable 2010-10-22 10:21:56 -07:00
otg USB OTG Langwell: Update OTG Kconfig and driver version. 2010-10-22 10:21:33 -07:00
serial USB: add PID for FTDI based OpenDCC hardware 2010-10-22 10:21:57 -07:00
storage usb: change to new flag variable 2010-10-22 10:21:56 -07:00
wusbcore usb: change to new flag variable 2010-10-22 10:21:56 -07:00
Kconfig USB: add USB EHCI support for MPC5121 SoC 2010-10-22 10:21:58 -07:00
Makefile USB: drivers/usb/Makefile: conditionally descend to 'early' 2010-08-10 14:35:38 -07:00
README
usb-skeleton.c USB: usb-skeleton: Remove unnecessary casts of private_data 2010-08-10 14:35:39 -07:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.