1525 lines
38 KiB
C
1525 lines
38 KiB
C
/*
|
|
* omap_hwmod implementation for OMAP2/3/4
|
|
*
|
|
* Copyright (C) 2009 Nokia Corporation
|
|
* Paul Walmsley
|
|
* With fixes and testing from Kevin Hilman
|
|
*
|
|
* Created in collaboration with (alphabetical order): Benoit Cousson,
|
|
* Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
|
|
* Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This code manages "OMAP modules" (on-chip devices) and their
|
|
* integration with Linux device driver and bus code.
|
|
*
|
|
* References:
|
|
* - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
|
|
* - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
|
|
* - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
|
|
* - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
|
|
* - Open Core Protocol Specification 2.2
|
|
*
|
|
* To do:
|
|
* - pin mux handling
|
|
* - handle IO mapping
|
|
* - bus throughput & module latency measurement code
|
|
*
|
|
* XXX add tests at the beginning of each function to ensure the hwmod is
|
|
* in the appropriate state
|
|
* XXX error return values should be checked to ensure that they are
|
|
* appropriate
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/list.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/bootmem.h>
|
|
|
|
#include <plat/common.h>
|
|
#include <plat/cpu.h>
|
|
#include <plat/clockdomain.h>
|
|
#include <plat/powerdomain.h>
|
|
#include <plat/clock.h>
|
|
#include <plat/omap_hwmod.h>
|
|
|
|
#include "cm.h"
|
|
|
|
/* Maximum microseconds to wait for OMAP module to reset */
|
|
#define MAX_MODULE_RESET_WAIT 10000
|
|
|
|
/* Name of the OMAP hwmod for the MPU */
|
|
#define MPU_INITIATOR_NAME "mpu_hwmod"
|
|
|
|
/* omap_hwmod_list contains all registered struct omap_hwmods */
|
|
static LIST_HEAD(omap_hwmod_list);
|
|
|
|
static DEFINE_MUTEX(omap_hwmod_mutex);
|
|
|
|
/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
|
|
static struct omap_hwmod *mpu_oh;
|
|
|
|
/* inited: 0 if omap_hwmod_init() has not yet been called; 1 otherwise */
|
|
static u8 inited;
|
|
|
|
|
|
/* Private functions */
|
|
|
|
/**
|
|
* _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Load the current value of the hwmod OCP_SYSCONFIG register into the
|
|
* struct omap_hwmod for later use. Returns -EINVAL if the hwmod has no
|
|
* OCP_SYSCONFIG register or 0 upon success.
|
|
*/
|
|
static int _update_sysc_cache(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh->sysconfig) {
|
|
WARN(!oh->sysconfig, "omap_hwmod: %s: cannot read "
|
|
"OCP_SYSCONFIG: not defined on hwmod\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* XXX ensure module interface clock is up */
|
|
|
|
oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
|
|
|
|
oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _write_sysconfig - write a value to the module's OCP_SYSCONFIG register
|
|
* @v: OCP_SYSCONFIG value to write
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Write @v into the module OCP_SYSCONFIG register, if it has one. No
|
|
* return value.
|
|
*/
|
|
static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
|
|
{
|
|
if (!oh->sysconfig) {
|
|
WARN(!oh->sysconfig, "omap_hwmod: %s: cannot write "
|
|
"OCP_SYSCONFIG: not defined on hwmod\n", oh->name);
|
|
return;
|
|
}
|
|
|
|
/* XXX ensure module interface clock is up */
|
|
|
|
if (oh->_sysc_cache != v) {
|
|
oh->_sysc_cache = v;
|
|
omap_hwmod_writel(v, oh, oh->sysconfig->sysc_offs);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _set_master_standbymode: set the OCP_SYSCONFIG MIDLEMODE field in @v
|
|
* @oh: struct omap_hwmod *
|
|
* @standbymode: MIDLEMODE field bits
|
|
* @v: pointer to register contents to modify
|
|
*
|
|
* Update the master standby mode bits in @v to be @standbymode for
|
|
* the @oh hwmod. Does not write to the hardware. Returns -EINVAL
|
|
* upon error or 0 upon success.
|
|
*/
|
|
static int _set_master_standbymode(struct omap_hwmod *oh, u8 standbymode,
|
|
u32 *v)
|
|
{
|
|
if (!oh->sysconfig ||
|
|
!(oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE))
|
|
return -EINVAL;
|
|
|
|
*v &= ~SYSC_MIDLEMODE_MASK;
|
|
*v |= __ffs(standbymode) << SYSC_MIDLEMODE_SHIFT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _set_slave_idlemode: set the OCP_SYSCONFIG SIDLEMODE field in @v
|
|
* @oh: struct omap_hwmod *
|
|
* @idlemode: SIDLEMODE field bits
|
|
* @v: pointer to register contents to modify
|
|
*
|
|
* Update the slave idle mode bits in @v to be @idlemode for the @oh
|
|
* hwmod. Does not write to the hardware. Returns -EINVAL upon error
|
|
* or 0 upon success.
|
|
*/
|
|
static int _set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode, u32 *v)
|
|
{
|
|
if (!oh->sysconfig ||
|
|
!(oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE))
|
|
return -EINVAL;
|
|
|
|
*v &= ~SYSC_SIDLEMODE_MASK;
|
|
*v |= __ffs(idlemode) << SYSC_SIDLEMODE_SHIFT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _set_clockactivity: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
|
|
* @oh: struct omap_hwmod *
|
|
* @clockact: CLOCKACTIVITY field bits
|
|
* @v: pointer to register contents to modify
|
|
*
|
|
* Update the clockactivity mode bits in @v to be @clockact for the
|
|
* @oh hwmod. Used for additional powersaving on some modules. Does
|
|
* not write to the hardware. Returns -EINVAL upon error or 0 upon
|
|
* success.
|
|
*/
|
|
static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
|
|
{
|
|
if (!oh->sysconfig ||
|
|
!(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
|
|
return -EINVAL;
|
|
|
|
*v &= ~SYSC_CLOCKACTIVITY_MASK;
|
|
*v |= clockact << SYSC_CLOCKACTIVITY_SHIFT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
|
|
* @oh: struct omap_hwmod *
|
|
* @v: pointer to register contents to modify
|
|
*
|
|
* Set the SOFTRESET bit in @v for hwmod @oh. Returns -EINVAL upon
|
|
* error or 0 upon success.
|
|
*/
|
|
static int _set_softreset(struct omap_hwmod *oh, u32 *v)
|
|
{
|
|
if (!oh->sysconfig ||
|
|
!(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET))
|
|
return -EINVAL;
|
|
|
|
*v |= SYSC_SOFTRESET_MASK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v
|
|
* @oh: struct omap_hwmod *
|
|
* @autoidle: desired AUTOIDLE bitfield value (0 or 1)
|
|
* @v: pointer to register contents to modify
|
|
*
|
|
* Update the module autoidle bit in @v to be @autoidle for the @oh
|
|
* hwmod. The autoidle bit controls whether the module can gate
|
|
* internal clocks automatically when it isn't doing anything; the
|
|
* exact function of this bit varies on a per-module basis. This
|
|
* function does not write to the hardware. Returns -EINVAL upon
|
|
* error or 0 upon success.
|
|
*/
|
|
static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
|
|
u32 *v)
|
|
{
|
|
if (!oh->sysconfig ||
|
|
!(oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE))
|
|
return -EINVAL;
|
|
|
|
*v &= ~SYSC_AUTOIDLE_MASK;
|
|
*v |= autoidle << SYSC_AUTOIDLE_SHIFT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Allow the hardware module @oh to send wakeups. Returns -EINVAL
|
|
* upon error or 0 upon success.
|
|
*/
|
|
static int _enable_wakeup(struct omap_hwmod *oh)
|
|
{
|
|
u32 v;
|
|
|
|
if (!oh->sysconfig ||
|
|
!(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
|
|
return -EINVAL;
|
|
|
|
v = oh->_sysc_cache;
|
|
v |= SYSC_ENAWAKEUP_MASK;
|
|
_write_sysconfig(v, oh);
|
|
|
|
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
|
|
|
|
oh->_int_flags |= _HWMOD_WAKEUP_ENABLED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _disable_wakeup: clear OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Prevent the hardware module @oh to send wakeups. Returns -EINVAL
|
|
* upon error or 0 upon success.
|
|
*/
|
|
static int _disable_wakeup(struct omap_hwmod *oh)
|
|
{
|
|
u32 v;
|
|
|
|
if (!oh->sysconfig ||
|
|
!(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
|
|
return -EINVAL;
|
|
|
|
v = oh->_sysc_cache;
|
|
v &= ~SYSC_ENAWAKEUP_MASK;
|
|
_write_sysconfig(v, oh);
|
|
|
|
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
|
|
|
|
oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _add_initiator_dep: prevent @oh from smart-idling while @init_oh is active
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Prevent the hardware module @oh from entering idle while the
|
|
* hardare module initiator @init_oh is active. Useful when a module
|
|
* will be accessed by a particular initiator (e.g., if a module will
|
|
* be accessed by the IVA, there should be a sleepdep between the IVA
|
|
* initiator and the module). Only applies to modules in smart-idle
|
|
* mode. Returns -EINVAL upon error or passes along
|
|
* pwrdm_add_sleepdep() value upon success.
|
|
*/
|
|
static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
|
|
{
|
|
if (!oh->_clk)
|
|
return -EINVAL;
|
|
|
|
return pwrdm_add_sleepdep(oh->_clk->clkdm->pwrdm.ptr,
|
|
init_oh->_clk->clkdm->pwrdm.ptr);
|
|
}
|
|
|
|
/**
|
|
* _del_initiator_dep: allow @oh to smart-idle even if @init_oh is active
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Allow the hardware module @oh to enter idle while the hardare
|
|
* module initiator @init_oh is active. Useful when a module will not
|
|
* be accessed by a particular initiator (e.g., if a module will not
|
|
* be accessed by the IVA, there should be no sleepdep between the IVA
|
|
* initiator and the module). Only applies to modules in smart-idle
|
|
* mode. Returns -EINVAL upon error or passes along
|
|
* pwrdm_add_sleepdep() value upon success.
|
|
*/
|
|
static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
|
|
{
|
|
if (!oh->_clk)
|
|
return -EINVAL;
|
|
|
|
return pwrdm_del_sleepdep(oh->_clk->clkdm->pwrdm.ptr,
|
|
init_oh->_clk->clkdm->pwrdm.ptr);
|
|
}
|
|
|
|
/**
|
|
* _init_main_clk - get a struct clk * for the the hwmod's main functional clk
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Called from _init_clocks(). Populates the @oh _clk (main
|
|
* functional clock pointer) if a main_clk is present. Returns 0 on
|
|
* success or -EINVAL on error.
|
|
*/
|
|
static int _init_main_clk(struct omap_hwmod *oh)
|
|
{
|
|
struct clk *c;
|
|
int ret = 0;
|
|
|
|
if (!oh->clkdev_con_id)
|
|
return 0;
|
|
|
|
c = clk_get_sys(oh->clkdev_dev_id, oh->clkdev_con_id);
|
|
WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get main_clk %s.%s\n",
|
|
oh->name, oh->clkdev_dev_id, oh->clkdev_con_id);
|
|
if (IS_ERR(c))
|
|
ret = -EINVAL;
|
|
oh->_clk = c;
|
|
|
|
WARN(!c->clkdm, "omap_hwmod: %s: missing clockdomain for %s.\n",
|
|
oh->clkdev_con_id, c->name);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* _init_interface_clk - get a struct clk * for the the hwmod's interface clks
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Called from _init_clocks(). Populates the @oh OCP slave interface
|
|
* clock pointers. Returns 0 on success or -EINVAL on error.
|
|
*/
|
|
static int _init_interface_clks(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_ocp_if *os;
|
|
struct clk *c;
|
|
int i;
|
|
int ret = 0;
|
|
|
|
if (oh->slaves_cnt == 0)
|
|
return 0;
|
|
|
|
for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
|
|
if (!os->clkdev_con_id)
|
|
continue;
|
|
|
|
c = clk_get_sys(os->clkdev_dev_id, os->clkdev_con_id);
|
|
WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get "
|
|
"interface_clk %s.%s\n", oh->name,
|
|
os->clkdev_dev_id, os->clkdev_con_id);
|
|
if (IS_ERR(c))
|
|
ret = -EINVAL;
|
|
os->_clk = c;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
|
|
* clock pointers. Returns 0 on success or -EINVAL on error.
|
|
*/
|
|
static int _init_opt_clks(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_opt_clk *oc;
|
|
struct clk *c;
|
|
int i;
|
|
int ret = 0;
|
|
|
|
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
|
|
c = clk_get_sys(oc->clkdev_dev_id, oc->clkdev_con_id);
|
|
WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get opt_clk "
|
|
"%s.%s\n", oh->name, oc->clkdev_dev_id,
|
|
oc->clkdev_con_id);
|
|
if (IS_ERR(c))
|
|
ret = -EINVAL;
|
|
oc->_clk = c;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* _enable_clocks - enable hwmod main clock and interface clocks
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Enables all clocks necessary for register reads and writes to succeed
|
|
* on the hwmod @oh. Returns 0.
|
|
*/
|
|
static int _enable_clocks(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_ocp_if *os;
|
|
int i;
|
|
|
|
pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
|
|
|
|
if (oh->_clk && !IS_ERR(oh->_clk))
|
|
clk_enable(oh->_clk);
|
|
|
|
if (oh->slaves_cnt > 0) {
|
|
for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
|
|
struct clk *c = os->_clk;
|
|
|
|
if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE))
|
|
clk_enable(c);
|
|
}
|
|
}
|
|
|
|
/* The opt clocks are controlled by the device driver. */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _disable_clocks - disable hwmod main clock and interface clocks
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Disables the hwmod @oh main functional and interface clocks. Returns 0.
|
|
*/
|
|
static int _disable_clocks(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_ocp_if *os;
|
|
int i;
|
|
|
|
pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
|
|
|
|
if (oh->_clk && !IS_ERR(oh->_clk))
|
|
clk_disable(oh->_clk);
|
|
|
|
if (oh->slaves_cnt > 0) {
|
|
for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
|
|
struct clk *c = os->_clk;
|
|
|
|
if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE))
|
|
clk_disable(c);
|
|
}
|
|
}
|
|
|
|
/* The opt clocks are controlled by the device driver. */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Returns the array index of the OCP slave port that the MPU
|
|
* addresses the device on, or -EINVAL upon error or not found.
|
|
*/
|
|
static int _find_mpu_port_index(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_ocp_if *os;
|
|
int i;
|
|
int found = 0;
|
|
|
|
if (!oh || oh->slaves_cnt == 0)
|
|
return -EINVAL;
|
|
|
|
for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
|
|
if (os->user & OCP_USER_MPU) {
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (found)
|
|
pr_debug("omap_hwmod: %s: MPU OCP slave port ID %d\n",
|
|
oh->name, i);
|
|
else
|
|
pr_debug("omap_hwmod: %s: no MPU OCP slave port found\n",
|
|
oh->name);
|
|
|
|
return (found) ? i : -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* _find_mpu_rt_base - find hwmod register target base addr accessible by MPU
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Return the virtual address of the base of the register target of
|
|
* device @oh, or NULL on error.
|
|
*/
|
|
static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
|
|
{
|
|
struct omap_hwmod_ocp_if *os;
|
|
struct omap_hwmod_addr_space *mem;
|
|
int i;
|
|
int found = 0;
|
|
void __iomem *va_start;
|
|
|
|
if (!oh || oh->slaves_cnt == 0)
|
|
return NULL;
|
|
|
|
os = *oh->slaves + index;
|
|
|
|
for (i = 0, mem = os->addr; i < os->addr_cnt; i++, mem++) {
|
|
if (mem->flags & ADDR_TYPE_RT) {
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (found) {
|
|
va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
|
|
if (!va_start) {
|
|
pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
|
|
return NULL;
|
|
}
|
|
pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
|
|
oh->name, va_start);
|
|
} else {
|
|
pr_debug("omap_hwmod: %s: no MPU register target found\n",
|
|
oh->name);
|
|
}
|
|
|
|
return (found) ? va_start : NULL;
|
|
}
|
|
|
|
/**
|
|
* _sysc_enable - try to bring a module out of idle via OCP_SYSCONFIG
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* If module is marked as SWSUP_SIDLE, force the module out of slave
|
|
* idle; otherwise, configure it for smart-idle. If module is marked
|
|
* as SWSUP_MSUSPEND, force the module out of master standby;
|
|
* otherwise, configure it for smart-standby. No return value.
|
|
*/
|
|
static void _sysc_enable(struct omap_hwmod *oh)
|
|
{
|
|
u8 idlemode;
|
|
u32 v;
|
|
|
|
if (!oh->sysconfig)
|
|
return;
|
|
|
|
v = oh->_sysc_cache;
|
|
|
|
if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) {
|
|
idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
|
|
HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
|
|
_set_slave_idlemode(oh, idlemode, &v);
|
|
}
|
|
|
|
if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) {
|
|
idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ?
|
|
HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
|
|
_set_master_standbymode(oh, idlemode, &v);
|
|
}
|
|
|
|
if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE) {
|
|
idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ?
|
|
0 : 1;
|
|
_set_module_autoidle(oh, idlemode, &v);
|
|
}
|
|
|
|
/* XXX OCP ENAWAKEUP bit? */
|
|
|
|
/*
|
|
* XXX The clock framework should handle this, by
|
|
* calling into this code. But this must wait until the
|
|
* clock structures are tagged with omap_hwmod entries
|
|
*/
|
|
if (oh->flags & HWMOD_SET_DEFAULT_CLOCKACT &&
|
|
oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY)
|
|
_set_clockactivity(oh, oh->sysconfig->clockact, &v);
|
|
|
|
_write_sysconfig(v, oh);
|
|
}
|
|
|
|
/**
|
|
* _sysc_idle - try to put a module into idle via OCP_SYSCONFIG
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* If module is marked as SWSUP_SIDLE, force the module into slave
|
|
* idle; otherwise, configure it for smart-idle. If module is marked
|
|
* as SWSUP_MSUSPEND, force the module into master standby; otherwise,
|
|
* configure it for smart-standby. No return value.
|
|
*/
|
|
static void _sysc_idle(struct omap_hwmod *oh)
|
|
{
|
|
u8 idlemode;
|
|
u32 v;
|
|
|
|
if (!oh->sysconfig)
|
|
return;
|
|
|
|
v = oh->_sysc_cache;
|
|
|
|
if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) {
|
|
idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
|
|
HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
|
|
_set_slave_idlemode(oh, idlemode, &v);
|
|
}
|
|
|
|
if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) {
|
|
idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ?
|
|
HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
|
|
_set_master_standbymode(oh, idlemode, &v);
|
|
}
|
|
|
|
_write_sysconfig(v, oh);
|
|
}
|
|
|
|
/**
|
|
* _sysc_shutdown - force a module into idle via OCP_SYSCONFIG
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Force the module into slave idle and master suspend. No return
|
|
* value.
|
|
*/
|
|
static void _sysc_shutdown(struct omap_hwmod *oh)
|
|
{
|
|
u32 v;
|
|
|
|
if (!oh->sysconfig)
|
|
return;
|
|
|
|
v = oh->_sysc_cache;
|
|
|
|
if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE)
|
|
_set_slave_idlemode(oh, HWMOD_IDLEMODE_FORCE, &v);
|
|
|
|
if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE)
|
|
_set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v);
|
|
|
|
if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE)
|
|
_set_module_autoidle(oh, 1, &v);
|
|
|
|
_write_sysconfig(v, oh);
|
|
}
|
|
|
|
/**
|
|
* _lookup - find an omap_hwmod by name
|
|
* @name: find an omap_hwmod by name
|
|
*
|
|
* Return a pointer to an omap_hwmod by name, or NULL if not found.
|
|
* Caller must hold omap_hwmod_mutex.
|
|
*/
|
|
static struct omap_hwmod *_lookup(const char *name)
|
|
{
|
|
struct omap_hwmod *oh, *temp_oh;
|
|
|
|
oh = NULL;
|
|
|
|
list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
|
|
if (!strcmp(name, temp_oh->name)) {
|
|
oh = temp_oh;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return oh;
|
|
}
|
|
|
|
/**
|
|
* _init_clocks - clk_get() all clocks associated with this hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Called by omap_hwmod_late_init() (after omap2_clk_init()).
|
|
* Resolves all clock names embedded in the hwmod. Must be called
|
|
* with omap_hwmod_mutex held. Returns -EINVAL if the omap_hwmod
|
|
* has not yet been registered or if the clocks have already been
|
|
* initialized, 0 on success, or a non-zero error on failure.
|
|
*/
|
|
static int _init_clocks(struct omap_hwmod *oh)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (!oh || (oh->_state != _HWMOD_STATE_REGISTERED))
|
|
return -EINVAL;
|
|
|
|
pr_debug("omap_hwmod: %s: looking up clocks\n", oh->name);
|
|
|
|
ret |= _init_main_clk(oh);
|
|
ret |= _init_interface_clks(oh);
|
|
ret |= _init_opt_clks(oh);
|
|
|
|
oh->_state = _HWMOD_STATE_CLKS_INITED;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* _wait_target_ready - wait for a module to leave slave idle
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Wait for a module @oh to leave slave idle. Returns 0 if the module
|
|
* does not have an IDLEST bit or if the module successfully leaves
|
|
* slave idle; otherwise, pass along the return value of the
|
|
* appropriate *_cm_wait_module_ready() function.
|
|
*/
|
|
static int _wait_target_ready(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_ocp_if *os;
|
|
int ret;
|
|
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
|
|
return 0;
|
|
|
|
os = *oh->slaves + oh->_mpu_port_index;
|
|
|
|
if (!(os->flags & OCPIF_HAS_IDLEST))
|
|
return 0;
|
|
|
|
/* XXX check module SIDLEMODE */
|
|
|
|
/* XXX check clock enable states */
|
|
|
|
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
|
|
ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
|
|
oh->prcm.omap2.idlest_reg_id,
|
|
oh->prcm.omap2.idlest_idle_bit);
|
|
#if 0
|
|
} else if (cpu_is_omap44xx()) {
|
|
ret = omap4_cm_wait_module_ready(oh->prcm.omap4.module_offs,
|
|
oh->prcm.omap4.device_offs);
|
|
#endif
|
|
} else {
|
|
BUG();
|
|
};
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* _reset - reset an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit. hwmod must be
|
|
* enabled for this to work. Must be called with omap_hwmod_mutex
|
|
* held. Returns -EINVAL if the hwmod cannot be reset this way or if
|
|
* the hwmod is in the wrong state, -ETIMEDOUT if the module did not
|
|
* reset in time, or 0 upon success.
|
|
*/
|
|
static int _reset(struct omap_hwmod *oh)
|
|
{
|
|
u32 r, v;
|
|
int c = 0;
|
|
|
|
if (!oh->sysconfig ||
|
|
!(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET) ||
|
|
(oh->sysconfig->sysc_flags & SYSS_MISSING))
|
|
return -EINVAL;
|
|
|
|
/* clocks must be on for this operation */
|
|
if (oh->_state != _HWMOD_STATE_ENABLED) {
|
|
WARN(1, "omap_hwmod: %s: reset can only be entered from "
|
|
"enabled state\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pr_debug("omap_hwmod: %s: resetting\n", oh->name);
|
|
|
|
v = oh->_sysc_cache;
|
|
r = _set_softreset(oh, &v);
|
|
if (r)
|
|
return r;
|
|
_write_sysconfig(v, oh);
|
|
|
|
omap_test_timeout((omap_hwmod_readl(oh, oh->sysconfig->syss_offs) &
|
|
SYSS_RESETDONE_MASK),
|
|
MAX_MODULE_RESET_WAIT, c);
|
|
|
|
if (c == MAX_MODULE_RESET_WAIT)
|
|
WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n",
|
|
oh->name, MAX_MODULE_RESET_WAIT);
|
|
else
|
|
pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name, c);
|
|
|
|
/*
|
|
* XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
|
|
* _wait_target_ready() or _reset()
|
|
*/
|
|
|
|
return (c == MAX_MODULE_RESET_WAIT) ? -ETIMEDOUT : 0;
|
|
}
|
|
|
|
/**
|
|
* _enable - enable an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Enables an omap_hwmod @oh such that the MPU can access the hwmod's
|
|
* register target. Must be called with omap_hwmod_mutex held.
|
|
* Returns -EINVAL if the hwmod is in the wrong state or passes along
|
|
* the return value of _wait_target_ready().
|
|
*/
|
|
static int _enable(struct omap_hwmod *oh)
|
|
{
|
|
int r;
|
|
|
|
if (oh->_state != _HWMOD_STATE_INITIALIZED &&
|
|
oh->_state != _HWMOD_STATE_IDLE &&
|
|
oh->_state != _HWMOD_STATE_DISABLED) {
|
|
WARN(1, "omap_hwmod: %s: enabled state can only be entered "
|
|
"from initialized, idle, or disabled state\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pr_debug("omap_hwmod: %s: enabling\n", oh->name);
|
|
|
|
/* XXX mux balls */
|
|
|
|
_add_initiator_dep(oh, mpu_oh);
|
|
_enable_clocks(oh);
|
|
|
|
if (oh->sysconfig) {
|
|
if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
|
|
_update_sysc_cache(oh);
|
|
_sysc_enable(oh);
|
|
}
|
|
|
|
r = _wait_target_ready(oh);
|
|
if (!r)
|
|
oh->_state = _HWMOD_STATE_ENABLED;
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* _idle - idle an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Idles an omap_hwmod @oh. This should be called once the hwmod has
|
|
* no further work. Returns -EINVAL if the hwmod is in the wrong
|
|
* state or returns 0.
|
|
*/
|
|
static int _idle(struct omap_hwmod *oh)
|
|
{
|
|
if (oh->_state != _HWMOD_STATE_ENABLED) {
|
|
WARN(1, "omap_hwmod: %s: idle state can only be entered from "
|
|
"enabled state\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pr_debug("omap_hwmod: %s: idling\n", oh->name);
|
|
|
|
if (oh->sysconfig)
|
|
_sysc_idle(oh);
|
|
_del_initiator_dep(oh, mpu_oh);
|
|
_disable_clocks(oh);
|
|
|
|
oh->_state = _HWMOD_STATE_IDLE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _shutdown - shutdown an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Shut down an omap_hwmod @oh. This should be called when the driver
|
|
* used for the hwmod is removed or unloaded or if the driver is not
|
|
* used by the system. Returns -EINVAL if the hwmod is in the wrong
|
|
* state or returns 0.
|
|
*/
|
|
static int _shutdown(struct omap_hwmod *oh)
|
|
{
|
|
if (oh->_state != _HWMOD_STATE_IDLE &&
|
|
oh->_state != _HWMOD_STATE_ENABLED) {
|
|
WARN(1, "omap_hwmod: %s: disabled state can only be entered "
|
|
"from idle, or enabled state\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pr_debug("omap_hwmod: %s: disabling\n", oh->name);
|
|
|
|
if (oh->sysconfig)
|
|
_sysc_shutdown(oh);
|
|
_del_initiator_dep(oh, mpu_oh);
|
|
/* XXX what about the other system initiators here? DMA, tesla, d2d */
|
|
_disable_clocks(oh);
|
|
/* XXX Should this code also force-disable the optional clocks? */
|
|
|
|
/* XXX mux any associated balls to safe mode */
|
|
|
|
oh->_state = _HWMOD_STATE_DISABLED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _setup - do initial configuration of omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
|
|
* OCP_SYSCONFIG register. Must be called with omap_hwmod_mutex
|
|
* held. Returns -EINVAL if the hwmod is in the wrong state or returns
|
|
* 0.
|
|
*/
|
|
static int _setup(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_ocp_if *os;
|
|
int i;
|
|
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
/* Set iclk autoidle mode */
|
|
if (oh->slaves_cnt > 0) {
|
|
for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
|
|
struct clk *c = os->_clk;
|
|
|
|
if (!c || IS_ERR(c))
|
|
continue;
|
|
|
|
if (os->flags & OCPIF_SWSUP_IDLE) {
|
|
/* XXX omap_iclk_deny_idle(c); */
|
|
} else {
|
|
/* XXX omap_iclk_allow_idle(c); */
|
|
clk_enable(c);
|
|
}
|
|
}
|
|
}
|
|
|
|
oh->_state = _HWMOD_STATE_INITIALIZED;
|
|
|
|
_enable(oh);
|
|
|
|
if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
|
|
/*
|
|
* XXX Do the OCP_SYSCONFIG bits need to be
|
|
* reprogrammed after a reset? If not, then this can
|
|
* be removed. If they do, then probably the
|
|
* _enable() function should be split to avoid the
|
|
* rewrite of the OCP_SYSCONFIG register.
|
|
*/
|
|
if (oh->sysconfig) {
|
|
_update_sysc_cache(oh);
|
|
_sysc_enable(oh);
|
|
}
|
|
}
|
|
|
|
if (!(oh->flags & HWMOD_INIT_NO_IDLE))
|
|
_idle(oh);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
/* Public functions */
|
|
|
|
u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs)
|
|
{
|
|
return __raw_readl(oh->_rt_va + reg_offs);
|
|
}
|
|
|
|
void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs)
|
|
{
|
|
__raw_writel(v, oh->_rt_va + reg_offs);
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_register - register a struct omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Registers the omap_hwmod @oh. Returns -EEXIST if an omap_hwmod already
|
|
* has been registered by the same name; -EINVAL if the omap_hwmod is in the
|
|
* wrong state, or 0 on success.
|
|
*
|
|
* XXX The data should be copied into bootmem, so the original data
|
|
* should be marked __initdata and freed after init. This would allow
|
|
* unneeded omap_hwmods to be freed on multi-OMAP configurations. Note
|
|
* that the copy process would be relatively complex due to the large number
|
|
* of substructures.
|
|
*/
|
|
int omap_hwmod_register(struct omap_hwmod *oh)
|
|
{
|
|
int ret, ms_id;
|
|
|
|
if (!oh || (oh->_state != _HWMOD_STATE_UNKNOWN))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&omap_hwmod_mutex);
|
|
|
|
pr_debug("omap_hwmod: %s: registering\n", oh->name);
|
|
|
|
if (_lookup(oh->name)) {
|
|
ret = -EEXIST;
|
|
goto ohr_unlock;
|
|
}
|
|
|
|
ms_id = _find_mpu_port_index(oh);
|
|
if (!IS_ERR_VALUE(ms_id)) {
|
|
oh->_mpu_port_index = ms_id;
|
|
oh->_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
|
|
} else {
|
|
oh->_int_flags |= _HWMOD_NO_MPU_PORT;
|
|
}
|
|
|
|
list_add_tail(&oh->node, &omap_hwmod_list);
|
|
|
|
oh->_state = _HWMOD_STATE_REGISTERED;
|
|
|
|
ret = 0;
|
|
|
|
ohr_unlock:
|
|
mutex_unlock(&omap_hwmod_mutex);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_lookup - look up a registered omap_hwmod by name
|
|
* @name: name of the omap_hwmod to look up
|
|
*
|
|
* Given a @name of an omap_hwmod, return a pointer to the registered
|
|
* struct omap_hwmod *, or NULL upon error.
|
|
*/
|
|
struct omap_hwmod *omap_hwmod_lookup(const char *name)
|
|
{
|
|
struct omap_hwmod *oh;
|
|
|
|
if (!name)
|
|
return NULL;
|
|
|
|
mutex_lock(&omap_hwmod_mutex);
|
|
oh = _lookup(name);
|
|
mutex_unlock(&omap_hwmod_mutex);
|
|
|
|
return oh;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_for_each - call function for each registered omap_hwmod
|
|
* @fn: pointer to a callback function
|
|
*
|
|
* Call @fn for each registered omap_hwmod, passing @data to each
|
|
* function. @fn must return 0 for success or any other value for
|
|
* failure. If @fn returns non-zero, the iteration across omap_hwmods
|
|
* will stop and the non-zero return value will be passed to the
|
|
* caller of omap_hwmod_for_each(). @fn is called with
|
|
* omap_hwmod_for_each() held.
|
|
*/
|
|
int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh))
|
|
{
|
|
struct omap_hwmod *temp_oh;
|
|
int ret;
|
|
|
|
if (!fn)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&omap_hwmod_mutex);
|
|
list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
|
|
ret = (*fn)(temp_oh);
|
|
if (ret)
|
|
break;
|
|
}
|
|
mutex_unlock(&omap_hwmod_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
/**
|
|
* omap_hwmod_init - init omap_hwmod code and register hwmods
|
|
* @ohs: pointer to an array of omap_hwmods to register
|
|
*
|
|
* Intended to be called early in boot before the clock framework is
|
|
* initialized. If @ohs is not null, will register all omap_hwmods
|
|
* listed in @ohs that are valid for this chip. Returns -EINVAL if
|
|
* omap_hwmod_init() has already been called or 0 otherwise.
|
|
*/
|
|
int omap_hwmod_init(struct omap_hwmod **ohs)
|
|
{
|
|
struct omap_hwmod *oh;
|
|
int r;
|
|
|
|
if (inited)
|
|
return -EINVAL;
|
|
|
|
inited = 1;
|
|
|
|
if (!ohs)
|
|
return 0;
|
|
|
|
oh = *ohs;
|
|
while (oh) {
|
|
if (omap_chip_is(oh->omap_chip)) {
|
|
r = omap_hwmod_register(oh);
|
|
WARN(r, "omap_hwmod: %s: omap_hwmod_register returned "
|
|
"%d\n", oh->name, r);
|
|
}
|
|
oh = *++ohs;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_late_init - do some post-clock framework initialization
|
|
*
|
|
* Must be called after omap2_clk_init(). Resolves the struct clk names
|
|
* to struct clk pointers for each registered omap_hwmod. Also calls
|
|
* _setup() on each hwmod. Returns 0.
|
|
*/
|
|
int omap_hwmod_late_init(void)
|
|
{
|
|
int r;
|
|
|
|
/* XXX check return value */
|
|
r = omap_hwmod_for_each(_init_clocks);
|
|
WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n");
|
|
|
|
mpu_oh = omap_hwmod_lookup(MPU_INITIATOR_NAME);
|
|
WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n",
|
|
MPU_INITIATOR_NAME);
|
|
|
|
omap_hwmod_for_each(_setup);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_unregister - unregister an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Unregisters a previously-registered omap_hwmod @oh. There's probably
|
|
* no use case for this, so it is likely to be removed in a later version.
|
|
*
|
|
* XXX Free all of the bootmem-allocated structures here when that is
|
|
* implemented. Make it clear that core code is the only code that is
|
|
* expected to unregister modules.
|
|
*/
|
|
int omap_hwmod_unregister(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
|
|
|
|
mutex_lock(&omap_hwmod_mutex);
|
|
iounmap(oh->_rt_va);
|
|
list_del(&oh->node);
|
|
mutex_unlock(&omap_hwmod_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_enable - enable an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Enable an omap_hwomd @oh. Intended to be called by omap_device_enable().
|
|
* Returns -EINVAL on error or passes along the return value from _enable().
|
|
*/
|
|
int omap_hwmod_enable(struct omap_hwmod *oh)
|
|
{
|
|
int r;
|
|
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&omap_hwmod_mutex);
|
|
r = _enable(oh);
|
|
mutex_unlock(&omap_hwmod_mutex);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_idle - idle an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Idle an omap_hwomd @oh. Intended to be called by omap_device_idle().
|
|
* Returns -EINVAL on error or passes along the return value from _idle().
|
|
*/
|
|
int omap_hwmod_idle(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&omap_hwmod_mutex);
|
|
_idle(oh);
|
|
mutex_unlock(&omap_hwmod_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_shutdown - shutdown an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Shutdown an omap_hwomd @oh. Intended to be called by
|
|
* omap_device_shutdown(). Returns -EINVAL on error or passes along
|
|
* the return value from _shutdown().
|
|
*/
|
|
int omap_hwmod_shutdown(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&omap_hwmod_mutex);
|
|
_shutdown(oh);
|
|
mutex_unlock(&omap_hwmod_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_enable_clocks - enable main_clk, all interface clocks
|
|
* @oh: struct omap_hwmod *oh
|
|
*
|
|
* Intended to be called by the omap_device code.
|
|
*/
|
|
int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
|
|
{
|
|
mutex_lock(&omap_hwmod_mutex);
|
|
_enable_clocks(oh);
|
|
mutex_unlock(&omap_hwmod_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_disable_clocks - disable main_clk, all interface clocks
|
|
* @oh: struct omap_hwmod *oh
|
|
*
|
|
* Intended to be called by the omap_device code.
|
|
*/
|
|
int omap_hwmod_disable_clocks(struct omap_hwmod *oh)
|
|
{
|
|
mutex_lock(&omap_hwmod_mutex);
|
|
_disable_clocks(oh);
|
|
mutex_unlock(&omap_hwmod_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_ocp_barrier - wait for posted writes against the hwmod to complete
|
|
* @oh: struct omap_hwmod *oh
|
|
*
|
|
* Intended to be called by drivers and core code when all posted
|
|
* writes to a device must complete before continuing further
|
|
* execution (for example, after clearing some device IRQSTATUS
|
|
* register bits)
|
|
*
|
|
* XXX what about targets with multiple OCP threads?
|
|
*/
|
|
void omap_hwmod_ocp_barrier(struct omap_hwmod *oh)
|
|
{
|
|
BUG_ON(!oh);
|
|
|
|
if (!oh->sysconfig || !oh->sysconfig->sysc_flags) {
|
|
WARN(1, "omap_device: %s: OCP barrier impossible due to "
|
|
"device configuration\n", oh->name);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Forces posted writes to complete on the OCP thread handling
|
|
* register writes
|
|
*/
|
|
omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_reset - reset the hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Under some conditions, a driver may wish to reset the entire device.
|
|
* Called from omap_device code. Returns -EINVAL on error or passes along
|
|
* the return value from _reset()/_enable().
|
|
*/
|
|
int omap_hwmod_reset(struct omap_hwmod *oh)
|
|
{
|
|
int r;
|
|
|
|
if (!oh || !(oh->_state & _HWMOD_STATE_ENABLED))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&omap_hwmod_mutex);
|
|
r = _reset(oh);
|
|
if (!r)
|
|
r = _enable(oh);
|
|
mutex_unlock(&omap_hwmod_mutex);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_count_resources - count number of struct resources needed by hwmod
|
|
* @oh: struct omap_hwmod *
|
|
* @res: pointer to the first element of an array of struct resource to fill
|
|
*
|
|
* Count the number of struct resource array elements necessary to
|
|
* contain omap_hwmod @oh resources. Intended to be called by code
|
|
* that registers omap_devices. Intended to be used to determine the
|
|
* size of a dynamically-allocated struct resource array, before
|
|
* calling omap_hwmod_fill_resources(). Returns the number of struct
|
|
* resource array elements needed.
|
|
*
|
|
* XXX This code is not optimized. It could attempt to merge adjacent
|
|
* resource IDs.
|
|
*
|
|
*/
|
|
int omap_hwmod_count_resources(struct omap_hwmod *oh)
|
|
{
|
|
int ret, i;
|
|
|
|
ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt;
|
|
|
|
for (i = 0; i < oh->slaves_cnt; i++)
|
|
ret += (*oh->slaves + i)->addr_cnt;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_fill_resources - fill struct resource array with hwmod data
|
|
* @oh: struct omap_hwmod *
|
|
* @res: pointer to the first element of an array of struct resource to fill
|
|
*
|
|
* Fill the struct resource array @res with resource data from the
|
|
* omap_hwmod @oh. Intended to be called by code that registers
|
|
* omap_devices. See also omap_hwmod_count_resources(). Returns the
|
|
* number of array elements filled.
|
|
*/
|
|
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
|
|
{
|
|
int i, j;
|
|
int r = 0;
|
|
|
|
/* For each IRQ, DMA, memory area, fill in array.*/
|
|
|
|
for (i = 0; i < oh->mpu_irqs_cnt; i++) {
|
|
(res + r)->name = (oh->mpu_irqs + i)->name;
|
|
(res + r)->start = (oh->mpu_irqs + i)->irq;
|
|
(res + r)->end = (oh->mpu_irqs + i)->irq;
|
|
(res + r)->flags = IORESOURCE_IRQ;
|
|
r++;
|
|
}
|
|
|
|
for (i = 0; i < oh->sdma_chs_cnt; i++) {
|
|
(res + r)->name = (oh->sdma_chs + i)->name;
|
|
(res + r)->start = (oh->sdma_chs + i)->dma_ch;
|
|
(res + r)->end = (oh->sdma_chs + i)->dma_ch;
|
|
(res + r)->flags = IORESOURCE_DMA;
|
|
r++;
|
|
}
|
|
|
|
for (i = 0; i < oh->slaves_cnt; i++) {
|
|
struct omap_hwmod_ocp_if *os;
|
|
|
|
os = *oh->slaves + i;
|
|
|
|
for (j = 0; j < os->addr_cnt; j++) {
|
|
(res + r)->start = (os->addr + j)->pa_start;
|
|
(res + r)->end = (os->addr + j)->pa_end;
|
|
(res + r)->flags = IORESOURCE_MEM;
|
|
r++;
|
|
}
|
|
}
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Return the powerdomain pointer associated with the OMAP module
|
|
* @oh's main clock. If @oh does not have a main clk, return the
|
|
* powerdomain associated with the interface clock associated with the
|
|
* module's MPU port. (XXX Perhaps this should use the SDMA port
|
|
* instead?) Returns NULL on error, or a struct powerdomain * on
|
|
* success.
|
|
*/
|
|
struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
|
|
{
|
|
struct clk *c;
|
|
|
|
if (!oh)
|
|
return NULL;
|
|
|
|
if (oh->_clk) {
|
|
c = oh->_clk;
|
|
} else {
|
|
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
|
|
return NULL;
|
|
c = oh->slaves[oh->_mpu_port_index]->_clk;
|
|
}
|
|
|
|
return c->clkdm->pwrdm.ptr;
|
|
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh
|
|
* @oh: struct omap_hwmod *
|
|
* @init_oh: struct omap_hwmod * (initiator)
|
|
*
|
|
* Add a sleep dependency between the initiator @init_oh and @oh.
|
|
* Intended to be called by DSP/Bridge code via platform_data for the
|
|
* DSP case; and by the DMA code in the sDMA case. DMA code, *Bridge
|
|
* code needs to add/del initiator dependencies dynamically
|
|
* before/after accessing a device. Returns the return value from
|
|
* _add_initiator_dep().
|
|
*
|
|
* XXX Keep a usecount in the clockdomain code
|
|
*/
|
|
int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
|
|
struct omap_hwmod *init_oh)
|
|
{
|
|
return _add_initiator_dep(oh, init_oh);
|
|
}
|
|
|
|
/*
|
|
* XXX what about functions for drivers to save/restore ocp_sysconfig
|
|
* for context save/restore operations?
|
|
*/
|
|
|
|
/**
|
|
* omap_hwmod_del_initiator_dep - remove sleepdep from @init_oh to @oh
|
|
* @oh: struct omap_hwmod *
|
|
* @init_oh: struct omap_hwmod * (initiator)
|
|
*
|
|
* Remove a sleep dependency between the initiator @init_oh and @oh.
|
|
* Intended to be called by DSP/Bridge code via platform_data for the
|
|
* DSP case; and by the DMA code in the sDMA case. DMA code, *Bridge
|
|
* code needs to add/del initiator dependencies dynamically
|
|
* before/after accessing a device. Returns the return value from
|
|
* _del_initiator_dep().
|
|
*
|
|
* XXX Keep a usecount in the clockdomain code
|
|
*/
|
|
int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
|
|
struct omap_hwmod *init_oh)
|
|
{
|
|
return _del_initiator_dep(oh, init_oh);
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_enable_wakeup - allow device to wake up the system
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Sets the module OCP socket ENAWAKEUP bit to allow the module to
|
|
* send wakeups to the PRCM. Eventually this should sets PRCM wakeup
|
|
* registers to cause the PRCM to receive wakeup events from the
|
|
* module. Does not set any wakeup routing registers beyond this
|
|
* point - if the module is to wake up any other module or subsystem,
|
|
* that must be set separately. Called by omap_device code. Returns
|
|
* -EINVAL on error or 0 upon success.
|
|
*/
|
|
int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh->sysconfig ||
|
|
!(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&omap_hwmod_mutex);
|
|
_enable_wakeup(oh);
|
|
mutex_unlock(&omap_hwmod_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_disable_wakeup - prevent device from waking the system
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Clears the module OCP socket ENAWAKEUP bit to prevent the module
|
|
* from sending wakeups to the PRCM. Eventually this should clear
|
|
* PRCM wakeup registers to cause the PRCM to ignore wakeup events
|
|
* from the module. Does not set any wakeup routing registers beyond
|
|
* this point - if the module is to wake up any other module or
|
|
* subsystem, that must be set separately. Called by omap_device
|
|
* code. Returns -EINVAL on error or 0 upon success.
|
|
*/
|
|
int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh->sysconfig ||
|
|
!(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&omap_hwmod_mutex);
|
|
_disable_wakeup(oh);
|
|
mutex_unlock(&omap_hwmod_mutex);
|
|
|
|
return 0;
|
|
}
|