p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/ata/sata_sil.c

737 lines
20 KiB
C
Raw Blame History

/*
* sata_sil.c - Silicon Image SATA
*
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
* Please ALWAYS copy linux-ide@vger.kernel.org
* on emails.
*
* Copyright 2003-2005 Red Hat, Inc.
* Copyright 2003 Benjamin Herrenschmidt
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* libata documentation is available via 'make {ps|pdf}docs',
* as Documentation/DocBook/libata.*
*
* Documentation for SiI 3112:
* http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
*
* Other errata and documentation available under NDA.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#define DRV_NAME "sata_sil"
#define DRV_VERSION "2.3"
enum {
SIL_MMIO_BAR = 5,
/*
* host flags
*/
SIL_FLAG_NO_SATA_IRQ = (1 << 28),
SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
SIL_FLAG_MOD15WRITE = (1 << 30),
SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO,
SIL_DFL_LINK_FLAGS = ATA_LFLAG_HRST_TO_RESUME,
/*
* Controller IDs
*/
sil_3112 = 0,
sil_3112_no_sata_irq = 1,
sil_3512 = 2,
sil_3114 = 3,
/*
* Register offsets
*/
SIL_SYSCFG = 0x48,
/*
* Register bits
*/
/* SYSCFG */
SIL_MASK_IDE0_INT = (1 << 22),
SIL_MASK_IDE1_INT = (1 << 23),
SIL_MASK_IDE2_INT = (1 << 24),
SIL_MASK_IDE3_INT = (1 << 25),
SIL_MASK_2PORT = SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT,
SIL_MASK_4PORT = SIL_MASK_2PORT |
SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT,
/* BMDMA/BMDMA2 */
SIL_INTR_STEERING = (1 << 1),
SIL_DMA_ENABLE = (1 << 0), /* DMA run switch */
SIL_DMA_RDWR = (1 << 3), /* DMA Rd-Wr */
SIL_DMA_SATA_IRQ = (1 << 4), /* OR of all SATA IRQs */
SIL_DMA_ACTIVE = (1 << 16), /* DMA running */
SIL_DMA_ERROR = (1 << 17), /* PCI bus error */
SIL_DMA_COMPLETE = (1 << 18), /* cmd complete / IRQ pending */
SIL_DMA_N_SATA_IRQ = (1 << 6), /* SATA_IRQ for the next channel */
SIL_DMA_N_ACTIVE = (1 << 24), /* ACTIVE for the next channel */
SIL_DMA_N_ERROR = (1 << 25), /* ERROR for the next channel */
SIL_DMA_N_COMPLETE = (1 << 26), /* COMPLETE for the next channel */
/* SIEN */
SIL_SIEN_N = (1 << 16), /* triggered by SError.N */
/*
* Others
*/
SIL_QUIRK_MOD15WRITE = (1 << 0),
SIL_QUIRK_UDMA5MAX = (1 << 1),
};
static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
#ifdef CONFIG_PM
static int sil_pci_device_resume(struct pci_dev *pdev);
#endif
static void sil_dev_config(struct ata_device *dev);
static int sil_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
static int sil_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed);
static void sil_freeze(struct ata_port *ap);
static void sil_thaw(struct ata_port *ap);
static const struct pci_device_id sil_pci_tbl[] = {
{ PCI_VDEVICE(CMD, 0x3112), sil_3112 },
{ PCI_VDEVICE(CMD, 0x0240), sil_3112 },
{ PCI_VDEVICE(CMD, 0x3512), sil_3512 },
{ PCI_VDEVICE(CMD, 0x3114), sil_3114 },
{ PCI_VDEVICE(ATI, 0x436e), sil_3112 },
{ PCI_VDEVICE(ATI, 0x4379), sil_3112_no_sata_irq },
{ PCI_VDEVICE(ATI, 0x437a), sil_3112_no_sata_irq },
{ } /* terminate list */
};
/* TODO firmware versions should be added - eric */
static const struct sil_drivelist {
const char *product;
unsigned int quirk;
} sil_blacklist [] = {
{ "ST320012AS", SIL_QUIRK_MOD15WRITE },
{ "ST330013AS", SIL_QUIRK_MOD15WRITE },
{ "ST340017AS", SIL_QUIRK_MOD15WRITE },
{ "ST360015AS", SIL_QUIRK_MOD15WRITE },
{ "ST380023AS", SIL_QUIRK_MOD15WRITE },
{ "ST3120023AS", SIL_QUIRK_MOD15WRITE },
{ "ST340014ASL", SIL_QUIRK_MOD15WRITE },
{ "ST360014ASL", SIL_QUIRK_MOD15WRITE },
{ "ST380011ASL", SIL_QUIRK_MOD15WRITE },
{ "ST3120022ASL", SIL_QUIRK_MOD15WRITE },
{ "ST3160021ASL", SIL_QUIRK_MOD15WRITE },
{ "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX },
{ }
};
static struct pci_driver sil_pci_driver = {
.name = DRV_NAME,
.id_table = sil_pci_tbl,
.probe = sil_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = sil_pci_device_resume,
#endif
};
static struct scsi_host_template sil_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static const struct ata_port_operations sil_ops = {
.dev_config = sil_dev_config,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.set_mode = sil_set_mode,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = sil_freeze,
.thaw = sil_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.scr_read = sil_scr_read,
.scr_write = sil_scr_write,
.port_start = ata_port_start,
};
static const struct ata_port_info sil_port_info[] = {
/* sil_3112 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
.link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
.port_ops = &sil_ops,
},
/* sil_3112_no_sata_irq */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
SIL_FLAG_NO_SATA_IRQ,
.link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
.port_ops = &sil_ops,
},
/* sil_3512 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
.link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
.port_ops = &sil_ops,
},
/* sil_3114 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
.link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
.port_ops = &sil_ops,
},
};
/* per-port register offsets */
/* TODO: we can probably calculate rather than use a table */
static const struct {
unsigned long tf; /* ATA taskfile register block */
unsigned long ctl; /* ATA control/altstatus register block */
unsigned long bmdma; /* DMA register block */
unsigned long bmdma2; /* DMA register block #2 */
unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */
unsigned long scr; /* SATA control register block */
unsigned long sien; /* SATA Interrupt Enable register */
unsigned long xfer_mode;/* data transfer mode register */
unsigned long sfis_cfg; /* SATA FIS reception config register */
} sil_port[] = {
/* port 0 ... */
/* tf ctl bmdma bmdma2 fifo scr sien mode sfis */
{ 0x80, 0x8A, 0x0, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c },
{ 0xC0, 0xCA, 0x8, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc },
{ 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c },
{ 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc },
/* ... port 3 */
};
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sil_pci_tbl);
MODULE_VERSION(DRV_VERSION);
static int slow_down;
module_param(slow_down, int, 0444);
MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)");
static unsigned char sil_get_device_cache_line(struct pci_dev *pdev)
{
u8 cache_line = 0;
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line);
return cache_line;
}
/**
* sil_set_mode - wrap set_mode functions
* @link: link to set up
* @r_failed: returned device when we fail
*
* Wrap the libata method for device setup as after the setup we need
* to inspect the results and do some configuration work
*/
static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed)
{
struct ata_port *ap = link->ap;
void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR];
void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode;
struct ata_device *dev;
u32 tmp, dev_mode[2] = { };
int rc;
rc = ata_do_set_mode(link, r_failed);
if (rc)
return rc;
ata_link_for_each_dev(dev, link) {
if (!ata_dev_enabled(dev))
dev_mode[dev->devno] = 0; /* PIO0/1/2 */
else if (dev->flags & ATA_DFLAG_PIO)
dev_mode[dev->devno] = 1; /* PIO3/4 */
else
dev_mode[dev->devno] = 3; /* UDMA */
/* value 2 indicates MDMA */
}
tmp = readl(addr);
tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0));
tmp |= dev_mode[0];
tmp |= (dev_mode[1] << 4);
writel(tmp, addr);
readl(addr); /* flush */
return 0;
}
static inline void __iomem *sil_scr_addr(struct ata_port *ap,
unsigned int sc_reg)
{
void __iomem *offset = ap->ioaddr.scr_addr;
switch (sc_reg) {
case SCR_STATUS:
return offset + 4;
case SCR_ERROR:
return offset + 8;
case SCR_CONTROL:
return offset;
default:
/* do nothing */
break;
}
return NULL;
}
static int sil_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
{
void __iomem *mmio = sil_scr_addr(ap, sc_reg);
if (mmio) {
*val = readl(mmio);
return 0;
}
return -EINVAL;
}
static int sil_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
{
void __iomem *mmio = sil_scr_addr(ap, sc_reg);
if (mmio) {
writel(val, mmio);
return 0;
}
return -EINVAL;
}
static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
{
struct ata_eh_info *ehi = &ap->link.eh_info;
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
u8 status;
if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) {
u32 serror;
/* SIEN doesn't mask SATA IRQs on some 3112s. Those
* controllers continue to assert IRQ as long as
* SError bits are pending. Clear SError immediately.
*/
sil_scr_read(ap, SCR_ERROR, &serror);
sil_scr_write(ap, SCR_ERROR, serror);
/* Sometimes spurious interrupts occur, double check
* it's PHYRDY CHG.
*/
if (serror & SERR_PHYRDY_CHG) {
ap->link.eh_info.serror |= serror;
goto freeze;
}
if (!(bmdma2 & SIL_DMA_COMPLETE))
return;
}
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
/* this sometimes happens, just clear IRQ */
ata_chk_status(ap);
return;
}
/* Check whether we are expecting interrupt in this state */
switch (ap->hsm_task_state) {
case HSM_ST_FIRST:
/* Some pre-ATAPI-4 devices assert INTRQ
* at this state when ready to receive CDB.
*/
/* Check the ATA_DFLAG_CDB_INTR flag is enough here.
* The flag was turned on only for atapi devices. No
* need to check ata_is_atapi(qc->tf.protocol) again.
*/
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
goto err_hsm;
break;
case HSM_ST_LAST:
if (ata_is_dma(qc->tf.protocol)) {
/* clear DMA-Start bit */
ap->ops->bmdma_stop(qc);
if (bmdma2 & SIL_DMA_ERROR) {
qc->err_mask |= AC_ERR_HOST_BUS;
ap->hsm_task_state = HSM_ST_ERR;
}
}
break;
case HSM_ST:
break;
default:
goto err_hsm;
}
/* check main status, clearing INTRQ */
status = ata_chk_status(ap);
if (unlikely(status & ATA_BUSY))
goto err_hsm;
/* ack bmdma irq events */
ata_bmdma_irq_clear(ap);
/* kick HSM in the ass */
ata_hsm_move(ap, qc, status, 0);
if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol))
ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2);
return;
err_hsm:
qc->err_mask |= AC_ERR_HSM;
freeze:
ata_port_freeze(ap);
}
static irqreturn_t sil_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR];
int handled = 0;
int i;
spin_lock(&host->lock);
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2);
if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
continue;
/* turn off SATA_IRQ if not supported */
if (ap->flags & SIL_FLAG_NO_SATA_IRQ)
bmdma2 &= ~SIL_DMA_SATA_IRQ;
if (bmdma2 == 0xffffffff ||
!(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ)))
continue;
sil_host_intr(ap, bmdma2);
handled = 1;
}
spin_unlock(&host->lock);
return IRQ_RETVAL(handled);
}
static void sil_freeze(struct ata_port *ap)
{
void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR];
u32 tmp;
/* global IRQ mask doesn't block SATA IRQ, turn off explicitly */
writel(0, mmio_base + sil_port[ap->port_no].sien);
/* plug IRQ */
tmp = readl(mmio_base + SIL_SYSCFG);
tmp |= SIL_MASK_IDE0_INT << ap->port_no;
writel(tmp, mmio_base + SIL_SYSCFG);
readl(mmio_base + SIL_SYSCFG); /* flush */
}
static void sil_thaw(struct ata_port *ap)
{
void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR];
u32 tmp;
/* clear IRQ */
ata_chk_status(ap);
ata_bmdma_irq_clear(ap);
/* turn on SATA IRQ if supported */
if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien);
/* turn on IRQ */
tmp = readl(mmio_base + SIL_SYSCFG);
tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no);
writel(tmp, mmio_base + SIL_SYSCFG);
}
/**
* sil_dev_config - Apply device/host-specific errata fixups
* @dev: Device to be examined
*
* After the IDENTIFY [PACKET] DEVICE step is complete, and a
* device is known to be present, this function is called.
* We apply two errata fixups which are specific to Silicon Image,
* a Seagate and a Maxtor fixup.
*
* For certain Seagate devices, we must limit the maximum sectors
* to under 8K.
*
* For certain Maxtor devices, we must not program the drive
* beyond udma5.
*
* Both fixups are unfairly pessimistic. As soon as I get more
* information on these errata, I will create a more exhaustive
* list, and apply the fixups to only the specific
* devices/hosts/firmwares that need it.
*
* 20040111 - Seagate drives affected by the Mod15Write bug are blacklisted
* The Maxtor quirk is in the blacklist, but I'm keeping the original
* pessimistic fix for the following reasons...
* - There seems to be less info on it, only one device gleaned off the
* Windows driver, maybe only one is affected. More info would be greatly
* appreciated.
* - But then again UDMA5 is hardly anything to complain about
*/
static void sil_dev_config(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
int print_info = ap->link.eh_context.i.flags & ATA_EHI_PRINTINFO;
unsigned int n, quirks = 0;
unsigned char model_num[ATA_ID_PROD_LEN + 1];
ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
for (n = 0; sil_blacklist[n].product; n++)
if (!strcmp(sil_blacklist[n].product, model_num)) {
quirks = sil_blacklist[n].quirk;
break;
}
/* limit requests to 15 sectors */
if (slow_down ||
((ap->flags & SIL_FLAG_MOD15WRITE) &&
(quirks & SIL_QUIRK_MOD15WRITE))) {
if (print_info)
ata_dev_printk(dev, KERN_INFO, "applying Seagate "
"errata fix (mod15write workaround)\n");
dev->max_sectors = 15;
return;
}
/* limit to udma5 */
if (quirks & SIL_QUIRK_UDMA5MAX) {
if (print_info)
ata_dev_printk(dev, KERN_INFO, "applying Maxtor "
"errata fix %s\n", model_num);
dev->udma_mask &= ATA_UDMA5;
return;
}
}
static void sil_init_controller(struct ata_host *host)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR];
u8 cls;
u32 tmp;
int i;
/* Initialize FIFO PCI bus arbitration */
cls = sil_get_device_cache_line(pdev);
if (cls) {
cls >>= 3;
cls++; /* cls = (line_size/8)+1 */
for (i = 0; i < host->n_ports; i++)
writew(cls << 8 | cls,
mmio_base + sil_port[i].fifo_cfg);
} else
dev_printk(KERN_WARNING, &pdev->dev,
"cache line size not set. Driver may not function\n");
/* Apply R_ERR on DMA activate FIS errata workaround */
if (host->ports[0]->flags & SIL_FLAG_RERR_ON_DMA_ACT) {
int cnt;
for (i = 0, cnt = 0; i < host->n_ports; i++) {
tmp = readl(mmio_base + sil_port[i].sfis_cfg);
if ((tmp & 0x3) != 0x01)
continue;
if (!cnt)
dev_printk(KERN_INFO, &pdev->dev,
"Applying R_ERR on DMA activate "
"FIS errata fix\n");
writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
cnt++;
}
}
if (host->n_ports == 4) {
/* flip the magic "make 4 ports work" bit */
tmp = readl(mmio_base + sil_port[2].bmdma);
if ((tmp & SIL_INTR_STEERING) == 0)
writel(tmp | SIL_INTR_STEERING,
mmio_base + sil_port[2].bmdma);
}
}
static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
int board_id = ent->driver_data;
const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL };
struct ata_host *host;
void __iomem *mmio_base;
int n_ports, rc;
unsigned int i;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
/* allocate host */
n_ports = 2;
if (board_id == sil_3114)
n_ports = 4;
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
if (!host)
return -ENOMEM;
/* acquire resources and fill host */
rc = pcim_enable_device(pdev);
if (rc)
return rc;
rc = pcim_iomap_regions(pdev, 1 << SIL_MMIO_BAR, DRV_NAME);
if (rc == -EBUSY)
pcim_pin_device(pdev);
if (rc)
return rc;
host->iomap = pcim_iomap_table(pdev);
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
return rc;
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
return rc;
mmio_base = host->iomap[SIL_MMIO_BAR];
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
struct ata_ioports *ioaddr = &ap->ioaddr;
ioaddr->cmd_addr = mmio_base + sil_port[i].tf;
ioaddr->altstatus_addr =
ioaddr->ctl_addr = mmio_base + sil_port[i].ctl;
ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma;
ioaddr->scr_addr = mmio_base + sil_port[i].scr;
ata_std_ports(ioaddr);
ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio");
ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf");
}
/* initialize and activate */
sil_init_controller(host);
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, sil_interrupt, IRQF_SHARED,
&sil_sht);
}
#ifdef CONFIG_PM
static int sil_pci_device_resume(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
sil_init_controller(host);
ata_host_resume(host);
return 0;
}
#endif
static int __init sil_init(void)
{
return pci_register_driver(&sil_pci_driver);
}
static void __exit sil_exit(void)
{
pci_unregister_driver(&sil_pci_driver);
}
module_init(sil_init);
module_exit(sil_exit);
Reference in New Issue View Git Blame Copy Permalink